Cellular unbinding forces of initial adhesion processes on nanopatterned surfaces probed with magnetic tweezers

Measuring pico-Newton Forces with Lipid Anchors as Force Sensors in Molecular Dynamics Simulations

Binding forces between biomolecules are ubiquitous in nature but sometimes as weak as a few pico-Newtons (pN). In many cases, the binding partners are attached to biomembranes with the help of a lipid anchor. One important example are glycolipids that promote membrane adhesion through weak carbohydrate-carbohydrate binding between adjacent membranes. Here, we use molecular dynamics (MD) simulations to quantify the forces generated by bonds involving membrane-anchored molecules. We introduce a method in which the protrusion of the lipid anchors from the membrane acts as the force sensor. Our results with two different glycolipids reveal binding forces of up to 20 pN and corroborate the recent notion that carbohydrate-carbohydrate interactions are generic rather than specific.

Investigation of cell mechanics using single-beam acoustic tweezers as a versatile tool for the diagnosis and treatment of highly invasive breast cancer cell lines: an in vitro study

Advancements in diagnostic systems for metastatic cancer over the last few decades have played a significant role in providing patients with effective treatment by evaluating the characteristics of cancer cells. Despite the progress made in cancer prognosis, we still rely on the visual analysis of tissues or cells from histopathologists, where the subjectivity of traditional manual interpretation persists. This paper presents the development of a dual diagnosis and treatment tool using an in vitro acoustic tweezers platform with a 50 MHz ultrasonic transducer for label-free trapping and bursting of human breast cancer cells. For cancer cell detection and classification, the mechanical properties of a single cancer cell were quantified by single-beam acoustic tweezers (SBAT), a noncontact assessment tool using a focused acoustic beam. Cell-mimicking phantoms and agarose hydrogel spheres (AHSs) served to standardize the biomechanical characteristics of the cells. Based on the analytical comparison of deformability levels between the cells and the AHSs, the mechanical properties of the cells could be indirectly measured by interpolating the Young's moduli of the AHSs. As a result, the calculated Young's moduli, i.e., 1.527 kPa for MDA-MB-231 (highly invasive breast cancer cells), 2.650 kPa for MCF-7 (weakly invasive breast cancer cells), and 2.772 kPa for SKBR-3 (weakly invasive breast cancer cells), indicate that highly invasive cancer cells exhibited a lower Young's moduli than weakly invasive cells, which indicates a higher deformability of highly invasive cancer cells, leading to a higher metastasis rate. Single-cell treatment may also be carried out by bursting a highly invasive cell with high-intensity, focused ultrasound.

Classification of Breast Cancer Cells Using the Integration of High-Frequency Single-Beam Acoustic Tweezers and Convolutional Neural Networks

Single-beam acoustic tweezers (SBAT) is a widely used trapping technique to manipulate microscopic particles or cells. Recently, the characterization of a single cancer cell using high-frequency (>30 MHz) SBAT has been reported to determine its invasiveness and metastatic potential. Investigation of cell elasticity and invasiveness is based on the deformability of cells under SBAT’s radiation forces, and in general, more physically deformed cells exhibit higher levels of invasiveness and therefore higher metastatic potential. However, previous imaging analysis to determine substantial differences in cell deformation, where the SBAT is turned ON or OFF, relies on the subjective observation that may vary and requires follow-up evaluations from experts. In this study, we propose an automatic and reliable cancer cell classification method based on SBAT and a convolutional neural network (CNN), which provides objective and accurate quantitative measurement results. We used a custom-designed 50 MHz SBAT transducer to obtain a series of images of deformed human breast cancer cells. CNN-based classification methods with data augmentation applied to collected images determined and validated the metastatic potential of cancer cells. As a result, with the selected optimizers, precision, and recall of the model were found to be greater than 0.95, which highly validates the classification performance of our integrated method. CNN-guided cancer cell deformation analysis using SBAT may be a promising alternative to current histological image analysis, and this pretrained model will significantly reduce the evaluation time for a larger population of cells.

Biophysics of Cell-Substrate Interactions Under Shear

Cells adhere to substrates through mechanosensitive focal adhesion complexes. Measurements that probe how cells detach from substrates when they experience an applied force connect molecular-scale aspects of cell adhesion with the biophysical properties of adherent cells. Such forces can be applied through shear devices that flow fluid in a controlled manner across cells. The signaling pathways associated with focal adhesions, in particular those that involve integrins and receptor tyrosine kinases, are complex, receiving mechano-chemical feedback from the sensing of substrate stiffness as well as of external forces. This article reviews the signaling processes involved in mechanosensing and mechanotransduction during cell-substrate interactions, describing the role such signaling plays in cancer metastasis. We examine some recent progress in quantifying the strength of these interactions, describing a novel fluid shear device that allows for the visualization of the cell and its sub-cellular structures under a shear flow. We also summarize related results from a biophysical model for cellular de-adhesion induced by applied forces. Quantifying cell-substrate adhesions under shear should aid in the development of mechano-diagnostic techniques for diseases in which cell-adhesion is mis-regulated, such as cancers.

Quantified forces between HepG2 hepatocarcinoma and WA07 pluripotent stem cells with natural biomaterials correlate with in vitro cell behavior

In vitro cell culture or tissue models that mimic in vivo cellular response have potential in tissue engineering and regenerative medicine, and are a more economical and accurate option for drug toxicity tests than animal experimentation. The design of in vivo-like cell culture models should take into account how the cells interact with the surrounding materials and how these interactions affect the cell behavior. Cell-material interactions are furthermore important in cancer metastasis and tumor progression, so deeper understanding of them can support the development of new cancer treatments. Herein, the colloidal probe microscopy technique was used to quantify the interactions of two cell lines (human pluripotent stem cell line WA07 and human hepatocellular carcinoma cell line HepG2) with natural, xeno-free biomaterials of different chemistry, morphology, and origin. Key components of extracellular matrices -human collagens I and IV, and human recombinant laminin-521-, as well as wood-derived, cellulose nanofibrils -with evidenced potential for 3D cell culture and tissue engineering- were analysed. Both strength of adhesion and force curve profiles depended on biomaterial nature and cell characteristics. The successful growth of the cells on a particular biomaterial required cell-biomaterial adhesion energies above 0.23 nJ/m. The information obtained in this work supports the development of new materials or hybrid scaffolds with tuned cell adhesion properties for tissue engineering, and provides a better understanding of the interactions of normal and cancerous cells with biomaterials in the human body.

Manipulating motions of targeted single cells in solution by an integrated double-ring magnetic tweezers imaging microscope

Controlling and manipulating living cell motions in solution hold a high promise in developing new biotechnology and biological science. Here, we developed a magnetic tweezers device that employs a combination of two permanent magnets in up-down double-ring configuration axially fitting with a microscopic objective, allowing a picoNewton (pN) bidirectional force and motion control on the sample beyond a single upward pulling direction. The experimental force calibration and magnetic field simulation using finite element method magnetics demonstrate that the designed magnetic tweezers covers a linear-combined pN force with positive-negative polarization changes in a tenability of sub-pN scale, which can be utilized to further achieve motion manipulation by shifting the force balance. We demonstrate an application of the up-down double-ring magnetic tweezers for single cell manipulation, showing that the cells with internalized paramagnetic beads can be selectively picked up and guided in a controlled fine motion.

Mechanochemical mechanism of integrin clustering modulated by nanoscale ligand spacing and rigidity of extracellular substrates

Experimental findings indicate that cell function and behavior such as cell growth, division, migration and differentiation, are subtly regulated via integrin-dependent cell adhesion. Cell adhesion is influenced by nanoscale ligand spacing and rigidity of extracellular substrates, as cell adhesion drops greatly when the ligand spacing is larger than ~60nm, and cell adhesion is stronger on stiff than soft substrates. However, how nanoscale ligand spacing and substrate stiffness jointly affect integrin clustering and hence nascent cell adhesion remains to be elucidated. To quantitatively investigate the phenomena and the underlying mechanochemical mechanism of integrin clustering modulated by ligand spacing and substrate stiffness, we introduced Monte Carlo simulations varying the values of ligand spacing and substrate stiffness. Moreover, the effects of integrin number, integrin binding free energy, integrin association free energy, and local ligand spacing were investigated. The simulation results showed that integrin clustering decreased sharply, when ligand spacing was relatively large such as d_L>60nm in the current simulations, regardless of substrate rigidities, though with close spacing, the clustering increased with the substrate stiffness. The investigation contributes to the goals of understanding and predicting experimental phenomena, directing and optimizing biomaterial design, and manipulating integrin-dependent cell-substrate adhesion in tissue engineering.

Fabrication of nanotweezers and their remote actuation by magnetic fields

A new kind of nanodevice that acts like tweezers through remote actuation by an external magnetic field is designed. Such device is meant to mechanically grab micrometric objects. The nanotweezers are built by using a top-down approach and are made of two parallelepipedic microelements, at least one of them being magnetic, bound by a flexible nanohinge. The presence of an external magnetic field induces a torque on the magnetic elements that competes with the elastic torque provided by the nanohinge. A model is established in order to evaluate the values of the balanced torques as a function of the tweezers opening angles. The results of the calculations are confronted to the expected values and validate the overall working principle of the magnetic nanotweezers.

Quantifying the effect of electric current on cell adhesion studied by single-cell force spectroscopy

This study presents the effect of external electric current on the cell adhesive and mechanical properties of the C2C12 mouse myoblast cell line. Changes in cell morphology, viability, cytoskeleton, and focal adhesion structure were studied by standard staining protocols, while single-cell force spectroscopy based on the fluidic force microscopy technology provided a rapid, serial quantification and detailed analysis of cell adhesion and its dynamics. The setup allowed measurements of adhesion forces up to the μN range, and total detachment distances over 40 μm. Force-distance curves have been fitted with a simple elastic model including a cell detachment protocol in order to estimate the Young's modulus of the cells, as well as to reveal changes in the dynamic properties as functions of the applied current dose. While the cell spreading area decreased monotonously with increasing current doses, small current doses resulted only in differences related to cell elasticity. Current doses above 11 As/m(2), however, initiated more drastic changes in cell morphology, viability, cellular structure, as well as in properties related to cell adhesion. The observed differences, eventually leading to cell death toward higher doses, might originate from both the decrease in pH and the generation of reactive oxygen species.

Lighting Up the Force: Investigating Mechanisms of Mechanotransduction Using Fluorescent Tension Probes

The ability of cells to sense the physical nature of their surroundings is critical to the survival of multicellular organisms. Cellular response to physical cues from adjacent cells and the extracellular matrix leads to a dynamic cycle in which cells respond by remodeling their local microenvironment, fine-tuning cell stiffness, polarity, and shape. Mechanical regulation is important in cellular development, normal morphogenesis, and wound healing. The mechanisms by which these finely balanced mechanotransduction events occur, however, are not well understood. In large part, this is due to the limited availability of tools to study molecular mechanotransduction events in live cells. Several classes of molecular tension probes have been recently developed which are rapidly transforming the study of mechanotransduction. Molecular tension probes are primarily based on fluorescence resonance energy transfer (FRET) and report on piconewton scale tension events in live cells. In this minireview, we describe the two main classes of tension probes, genetically encoded tension sensors and immobilized tension sensors, and discuss the advantages and limitations of each type. We discuss future opportunities to address major biological questions and outline the challenges facing the next generation of molecular tension probes.

In situ quantification of living cell adhesion forces: single cell force spectroscopy with a nanotweezer

A novel method is presented for in situ quantification of living cell adhesion forces using a homemade nanorobotic system provided with two independently actuated probes that form a dual-probe nanotweezer capable of pick-and-place manipulation of a single living cell in an aqueous environment. Compared with single-cell force spectroscopy (SCFS) based on traditional atomic force microscopy (AFM), cell immobilization via chemical trapping is unnecessary and the test cell can be efficiently released using the nanotweezer to significantly enhance production of the SCFS. Benefiting from the accurate force sensing capability of AFM, the nanotweezer allows reliable force measurement ranging from picoNewtons to microNewtons and is sufficiently sensitive to characterize short- and long-term adhesion of cell-cell and cell-substrate adhesions. Capabilities of the nanotweezer have been validated through experimental qualification of cell-substrate and cell-cell adhesion events of C2C12 cells (mouse myoblast adherent) with different contact times.

Single-cell force spectroscopy, an emerging tool to quantify cell adhesion to biomaterials

Cell adhesion receptors play a central role in sensing and integrating signals provided by the cellular environment. Thus, understanding adhesive interactions at the cell-biomaterial interface is essential to improve the design of implants that should emulate certain characteristics of the cell's natural environment. Numerous cell adhesion assays have been developed; among these, atomic force microscopy-based single-cell force spectroscopy (AFM-SCFS) provides a versatile tool to quantify cell adhesion at physiological conditions. Here we discuss how AFM-SCFS can be used to quantify the adhesion of living cells to biomaterials and give examples of using AFM-SCFS in tissue engineering and regenerative medicine. We anticipate that in the near future, AFM-SCFS will be established in the biomaterial field as an important technique to quantify cell-biomaterial interactions and thereby will contribute to the optimization of implants, scaffolds, and medical devices.

Conversion of bilayers of PS-b-PDMS block copolymer into closely packed, aligned silica nanopatterns

Block copolymer (BCP) self-assembly is an effective and versatile approach for the production of complex nanopatterned interfaces. Monolayers of BCP films can be harnessed to produce a variety of different patterns, including lines, with specific spacings and order. In this work, bilayers of cylinder-forming polystyrene-block-polydimethylsiloxane block copolymer (PS-b-PDMS) were transformed into arrays of silica lines with half the pitch normally attained for conventional monolayers, with the PDMS acting as the source for the SiOx. The primary hurdle was ensuring the bilayer silica lines were distinctly separate; to attain the control necessary to prevent overlap, a number of variables related to the materials and self-assembly process were investigated in detail. Developing a detailed understanding of BCP film swelling during solvent annealing, blending of the PS-b-PDMS with PS homopolymer, utilization of a surface brush layer, and adjustment of the plasma exposure conditions, distinct and separate silica lines were prepared. On the microscale, the sample coverage of PS-b-PDMS bilayers was investigated and maximized to attain >95% bilayers under defined conditions. The bilayer BCP structures were also amenable to graphoepitaxy, and thus, dense and highly ordered arrays of silica line patterns with tightly controlled width and pitch were fabricated and distributed uniformly across a Si surface.

Micro-nanopatterning as tool to study the role of physicochemical properties on cell-surface interactions

The current nano-biotechnologies interfacing synthetic materials and cell biology requires a better understanding of cell-surface interactions on the micro-to-nanometer scale. Cell-substrate interactions are mediated by the presence of proteins adsorbed from biological fluids to the substrate. The effect of nanotopography and surface chemistry on protein adsorption as well as the mediation effect on subsequent cellular communication with substratum is not well documented. This review discusses the role of physicochemical properties of cell-surface interactions and state-of-the-art methods currently available for micro-nanoscale surface fabrication and patterning. We also briefly discuss the current surface patterning techniques that allow the combination of a fine and independent control on nanotopography and chemistry to understand the effect of surface nanoscale substrate morphology on cell-surface interactions which has never been realized in previous reports. In addition, we discuss the influence of various chemical patterning and modulation of the nano-topography of surfaces on cell functionality and phenotype.

Force mapping during the formation and maturation of cell adhesion sites with multiple optical tweezers

Focal contacts act as mechanosensors allowing cells to respond to their biomechanical environment. Force transmission through newly formed contact sites is a highly dynamic process requiring a stable link between the intracellular cytoskeleton and the extracellular environment. To simultaneously investigate cellular traction forces in several individual maturing adhesion sites within the same cell, we established a custom-built multiple trap optical tweezers setup. Beads functionalized with fibronectin or RGD-peptides were placed onto the apical surface of a cell and trapped with a maximum force of 160 pN. Cells form adhesion contacts around the beads as demonstrated by vinculin accumulation and start to apply traction forces after 30 seconds. Force transmission was found to strongly depend on bead size, surface density of integrin ligands and bead location on the cell surface. Highest traction forces were measured for beads positioned on the leading edge. For mouse embryonic fibroblasts, traction forces acting on single beads are in the range of 80 pN after 5 minutes. If two beads were positioned parallel to the leading edge and with a center-to-center distance less than 10 µm, traction forces acting on single beads were reduced by 40%. This indicates a spatial and temporal coordination of force development in closely related adhesion sites. We also used our setup to compare traction forces, retrograde transport velocities, and migration velocities between two cell lines (mouse melanoma and fibroblasts) and primary chick fibroblasts. We find that maximal force development differs considerably between the three cell types with the primary cells being the strongest. In addition, we observe a linear relation between force and retrograde transport velocity: a high retrograde transport velocity is associated with strong cellular traction forces. In contrast, migration velocity is inversely related to traction forces and retrograde transport velocity.

Rapid and serial quantification of adhesion forces of yeast and Mammalian cells

Cell adhesion to surfaces represents the basis for niche colonization and survival. Here we establish serial quantification of adhesion forces of different cell types using a single probe. The pace of single-cell force-spectroscopy was accelerated to up to 200 yeast and 20 mammalian cells per probe when replacing the conventional cell trapping cantilever chemistry of atomic force microscopy by underpressure immobilization with fluidic force microscopy (FluidFM). In consequence, statistically relevant data could be recorded in a rapid manner, the spectrum of examinable cells was enlarged, and the cell physiology preserved until approached for force spectroscopy. Adhesion forces of Candida albicans increased from below 4 up to 16 nN at 37°C on hydrophobic surfaces, whereas a Δhgc1-mutant showed forces consistently below 4 nN. Monitoring adhesion of mammalian cells revealed mean adhesion forces of 600 nN of HeLa cells on fibronectin and were one order of magnitude higher than those observed for HEK cells.

Long reach cantilevers for sub-cellular force measurements

Maneuverable, high aspect ratio poly(3,4-ethylene dioxythiophene) (PEDOT) fibers are fabricated for use as cellular force probes that can interface with individual pseudopod adhesive contact sites without forming unintentional secondary contacts to the cell. The straight fibers have lengths between 5 and 40 μm and spring constants in the 0.07-23.2 nN μm(-1) range. The spring constants of these fibers were measured directly using an atomic force microscope (AFM). These AFM measurements corroborate determinations based on the transverse vibrational resonance frequencies of the fibers, which is a more convenient method. These fibers are employed to characterize the time dependent forces exerted at adhesive contacts between apical pseudopods of highly migratory D. discoideum cells and the PEDOT fibers, finding an average terminal force of 3.1 ± 2.7 nN and lifetime of 23.4 ± 18.5 s to be associated with these contacts.

Finding the weakest link: exploring integrin-mediated mechanical molecular pathways

From the extracellular matrix to the cytoskeleton, a network of molecular links connects cells to their environment. Molecules in this network transmit and detect mechanical forces, which subsequently determine cell behavior and fate. Here, we reconstruct the mechanical pathway followed by these forces. From matrix proteins to actin through integrins and adaptor proteins, we review how forces affect the lifetime of bonds and stretch or alter the conformation of proteins, and how these mechanical changes are converted into biochemical signals in mechanotransduction events. We evaluate which of the proteins in the network can participate in mechanotransduction and which are simply responsible for transmitting forces in a dynamic network. Besides their individual properties, we also analyze how the mechanical responses of a protein are determined by their serial connections from the matrix to actin, their parallel connections in integrin clusters and by the rate at which force is applied to them. All these define mechanical molecular pathways in cells, which are emerging as key regulators of cell function alongside better studied biochemical pathways.

Measuring kinetic dissociation/association constants between Lactococcus lactis bacteria and mucins using living cell probes

In this work we focused on quantifying adhesion between Lactococcus lactis, the model for lactic acid bacteria (LAB) and mucins. Interactions between two strains of L. lactis (IBB477 and MG1820 as control) and pig gastric mucin-based coating were measured and compared with the use of atomic force microscopy. Analysis of retraction force-distance curves shed light on the differential contributions of nonspecific and specific forces. An increased proportion of specific adhesive events was obtained for IBB477 (20% vs. 5% for the control). Blocking assays with free pig gastric mucin and its O-glycan moiety showed that oligosaccharides play a major (but not exclusive) role in L. lactis-mucins interactions. Specific interactions were analyzed in terms of kinetic constants. An increase in the loading rate of atomic force microscope tip led to a higher force between interacting biological entities, which was directly linked to the kinetic dissociation constant (K(off)). Enhancing the contact time between the tip and the sample allowed an increase in the interaction probability, which can be related to the kinetic association constant (K(on)). Variations in the loading rate and contact time enabled us to determine K(on) (3.3 × 10(2) M(-1)·s(-1)) and K(off) (0.46 s(-1)), and the latter was consistent with values given in the literature for sugar-protein interactions.

Selective surface chemistry using alumina nanoparticles generated from block copolymers

Developing orthogonal surface chemistry techniques that perform at the nanoscale is key to achieving precise control over molecular patterning on surfaces. We report the formation and selective functionalization of alumina nanoparticle arrays generated from block copolymer templates. This new material provides an alternative to gold for orthogonal surface chemistry at the nanometer scale. Atomic force microscopy and X-ray photoelectron spectroscopy confirm these particles show excellent selectivity over silica for phosphonic and carboxylic acid adsorption. As this is the first reported synthesis of alumina nanoparticles from block copolymer templates, characterizations via Fourier transform infrared spectroscopy, Auger electron spectroscopy, and transmission electron microscopy are presented. Reproducible formation of alumina nanoparticles was dependent on a counterintuitive synthetic step wherein a small amount of water is added to an anhydrous toluene solution of block copolymer and aluminum chloride. The oxidation environment of the aluminum in these particles, as measured by Auger electron spectroscopy, is similar to that of native aluminum oxide and alumina grown by atomic layer deposition. This discovery expands the library of available surface chemistries for nanoscale molecular patterning.

Measuring cell adhesion forces: theory and principles

Cell adhesion is an essential prerequisite for survival, communication, and navigation of cells in organisms. It is maintained by the organized binding of molecules from the cell membrane to the extracellular space. This chapter focuses on direct measurements of cellular binding strength at the level of single adhesion molecules. Using atomic force microscopy-based force measurements, adhesion strength can be monitored as a function of adhesion time and environmental conditions. In this way, cellular adhesion strategies like changes in affinity and avidity of adhesion molecules (e.g., integrins) are characterized as well as the molecular arrangement of adhesion molecules in the cell membrane (e.g., molecular clusters, focal adhesion spots, and linkage to the cytoskeleton or tether). Some prominent values for the data evaluation are presented as well as constraints and preparative techniques for successful cell adhesion force experiments.

Relative influence of surface topography and surface chemistry on cell response to bone implant materials. Part 2: Biological aspects

A current medical challenge is the replacement of tissue which can be thought of in terms of bone tissue engineering approaches. The key problem in bone tissue engineering lies in associating bone stem cells with material supports or scaffolds that can be implanted in a patient. Beside bone tissue engineering approaches, these types of materials are used daily in orthopaedics and dental practice as permanent or transitory implants such as ceramic bone filling materials or metallic prostheses. Consequently, it is essential to better understand how bone cells interact with materials. For several years, the current authors and others have developed in vitro studies in order to elucidate the mechanisms underlying the response of human bone cells to implant surfaces. This paper reviews the current state of knowledge and proposes future directions for research in this domain.

The interaction of cells and bacteria with surfaces structured at the nanometre scale

The current development of nanobiotechnologies requires a better understanding of cell-surface interactions on the nanometre scale. Recently, advances in nanoscale patterning and detection have allowed the fabrication of appropriate substrates and the study of cell-substrate interactions. In this review we discuss the methods currently available for nanoscale patterning and their merits, as well as techniques for controlling the surface chemistry of materials at the nanoscale without changing the nanotopography and the possibility of truly characterizing the surface chemistry at the nanoscale. We then discuss the current knowledge of how a cell can interact with a substrate at the nanoscale and the effect of size, morphology, organization and separation of nanofeatures on cell response. Moreover, cell-substrate interactions are mediated by the presence of proteins adsorbed from biological fluids on the substrate. Many questions remain on the effect of nanotopography on protein adsorption. We review papers related to this point. As all these parameters have an influence on cell response, it is important to develop specific studies to point out their relative influence, as well as the biological mechanisms underlying cell responses to nanotopography. This will be the basis for future research in this field. An important topic in tissue engineering is the effect of nanoscale topography on bacteria, since cells have to compete with bacteria in many environments. The limited current knowledge of this topic is also discussed in the light of using topography to encourage cell adhesion while limiting bacterial adhesion. We also discuss current and prospective applications of cell-surface interactions on the nanoscale. Finally, based on questions raised previously that remain to be solved in the field, we propose future directions of research in materials science to help elucidate the relative influence of the physical and chemical aspects of nanotopography on bacteria and cell response with the aim of contributing to the development of nanobiotechnologies.

Use of force spectroscopy to investigate the adhesion of living adherent cells

The use of force spectroscopy to study the adhesion of living fibroblasts to their culture substrate was investigated. Both primary fibroblasts (PEMF) and a continuous cell line (3T3) were studied on quartz surfaces. Using a fibronectin-coated AFM cantilever, it was possible to detach a large proportion of the 3T3 cells from the quartz surfaces. Their adhesion to the quartz surface and the effects of topography on this adhesion could be quantified. Three parameters characteristic of the adhesion were measured: the maximum force of detachment, the work of adhesion, and the distance of detachment. Few PEMF cells were detached under the same experimental conditions. The potential and limitations of this method in measuring cell/surface interactions for adherent cells are discussed.

Mechanical principle of enhancing cell-substrate adhesion via pre-tension in the cytoskeleton

Motivated by our earlier study on the effect of pre-tension in gecko adhesion, here we investigate whether and how pre-tension in cytoskeleton influences cell adhesion by developing a stochastic-elasticity model of a stress fiber attached on a rigid substrate via molecular bonds. By comparing the variations in adhesion lifetime and observing the sequences of bond breaking with and without pre-tension in the stress fiber under the same applied force, we demonstrate that the effect of pre-tension is to shift the interfacial failure mode from cracklike propagation toward uniform bond failure within the contact region, thereby greatly increasing the adhesion lifetime. Since stress fibers are the primary load-bearing components of cells, as well as the basic functional units of cytoskeleton that facilitate cell adhesion, this study suggests a feasible mechanism by which cell adhesion could be actively controlled via cytoskeletal contractility and proposes that pre-tension may be a general principle in biological adhesion.

Substrate, focal adhesions, and actin filaments: a mechanical unit with a weak spot for mechanosensitive proteins

Mechanosensing is a vital prerequisite for dynamic remodeling of focal adhesions and cytoskeletal structures upon substrate deformation. For example, tissue formation, directed cell orientation or cell differentiation are regulated by such mechanosensing processes. Focal adhesions and the actin cytoskeleton are believed to be involved in these processes, but where mechanosensing molecules are located and how elastic substrate, focal adhesions and the cytoskeleton couple with each other upon substrate deformation still remains obscure. To approach these questions we have developed a sensitive method to apply defined spatially decaying deformation fields to cells cultivated on ultrasoft elastic substrates and to accurately quantify the resulting displacements of the actin cytoskeleton, focal adhesions, as well as the substrate. Displacement fields were recorded in live cell microscopy by tracking either signals from fluorescent proteins or marker particles in the substrate. As model cell type we used myofibroblasts. These cells are characterized by highly stable adhesion and force generating structures but are still able to detect mechanical signals with high sensitivity. We found a rigid connection between substrate and focal adhesions. Furthermore, stress fibers were found to be barely extendable almost over their whole lengths. Plastic deformation took place only at the very ends of actin filaments close to focal adhesions. As a result, this area became elongated without extension of existing actin filaments by polymerization. Both ends of the stress fibers were mechanically coupled with detectable plastic deformations on either site. Interestingly, traction force dependent substrate deformation fields remained mostly unaffected even when stress fiber elongations were released. These data argue for a location of mechanosensing proteins at the ends of actin stress fibers and describe, except for these domains, the whole system to be relatively rigid for tensile strain with a mechanical coupling between the front and rear end of a cell.

Integrin clustering is driven by mechanical resistance from the glycocalyx and the substrate

Integrins have emerged as key sensory molecules that translate chemical and physical cues from the extracellular matrix (ECM) into biochemical signals that regulate cell behavior. Integrins function by clustering into adhesion plaques, but the molecular mechanisms that drive integrin clustering in response to interaction with the ECM remain unclear. To explore how deformations in the cell-ECM interface influence integrin clustering, we developed a spatial-temporal simulation that integrates the micro-mechanics of the cell, glycocalyx, and ECM with a simple chemical model of integrin activation and ligand interaction. Due to mechanical coupling, we find that integrin-ligand interactions are highly cooperative, and this cooperativity is sufficient to drive integrin clustering even in the absence of cytoskeletal crosslinking or homotypic integrin-integrin interactions. The glycocalyx largely mediates this cooperativity and hence may be a key regulator of integrin function. Remarkably, integrin clustering in the model is naturally responsive to the chemical and physical properties of the ECM, including ligand density, matrix rigidity, and the chemical affinity of ligand for receptor. Consistent with experimental observations, we find that integrin clustering is robust on rigid substrates with high ligand density, but is impaired on substrates that are highly compliant or have low ligand density. We thus demonstrate how integrins themselves could function as sensory molecules that begin sensing matrix properties even before large multi-molecular adhesion complexes are assembled.

Critical cell decisions, including whether to live, proliferate, or assemble into tissue structures, are directed by cues from the extracellular matrix, the external protein scaffold that surrounds cells. Integrin receptors on the cell surface bind to the extracellular matrix and cluster into complexes that translate matrix cues into the set of instructions a cell follows. Using a newly developed model of the cell-matrix interface, in this work we detail a simple yet efficient mechanism by which integrins could “sense” important matrix properties, including chemical composition and mechanical stiffness, and cluster appropriately. This mechanism relies on mechanical resistance to integrin-matrix interaction provided by the glycocalyx, the slimy sugar and protein coating on the cell, as well as the stiffness of the matrix and the cell itself. In general, the resistance alters integrin-ligand reaction rates, such that integrin clustering is favored for many physiologically relevant conditions. Interestingly, the mechanical properties of the cell and ECM are altered in many prevalent diseases, such as cancer, and our work suggests how these mechanical perturbations might adversely influence integrin function.

Tunable wetting of nanoparticle-decorated polymer films

In this paper, amine-modified silica nanoparticles (NPs) with diameters (d) from 15 to 230 nm are covalently linked to poly(styrene-random-acrylic acid) (P(S-ran-AA)) films, and wettability is studied as a function of diameter and NP surface coverage. During attachment, films swell and exhibit long and short scale roughness, consisting of a ridged, honeycomb structure, approximately 1 mum wide and 45-50 nm deep, which encircles nanoscale features 10-15 nm high and approximately 50 nm apart. A maximum NP coverage of approximately 70% was achieved for d less than or nearly equal to the nanoscale roughness induced by surface swelling. For d several times greater than this nanoscale roughness, the maximum coverage was limited by interparticle repulsion and reached only approximately 30%. For NPs with diameters of 15-106 nm, the water contact angle increased from 75 degrees to 120 degrees as NP coverage increased from 0 to 70%. At low and high NP coverage, the Wenzel and Cassie models, respectively, accurately describe the data. However, at intermediate NP coverage, neither model is satisfactory. An increase in surface roughness alone cannot account for this discrepancy. Atomic force microscopy (AFM) studies show that the NPs partially embed into the swollen P(S-ran-AA) surface, suggesting that the amine-coated NPs are wet by the copolymer, exposing low surface energy styrene. These studies demonstrate that control over surface properties of coatings, such as wetting, can be achieved by selecting NP sizes that complement film roughness.

Integrating a high-force optical trap with gold nanoposts and a robust gold-DNA bond

Gold-thiol chemistry is widely used in nanotechnology but has not been exploited in optical-trapping experiments due to laser-induced ablation of gold. We circumvented this problem by using an array of gold nanoposts (r = 50-250 nm, h approximately 20 nm) that allowed for quantitative optical-trapping assays without direct irradiation of the gold. DNA was covalently attached to the gold via dithiol phosphoramidite (DTPA). By using three DTPAs, the gold-DNA bond was not cleaved in the presence of excess thiolated compounds. This chemical robustness allowed us to reduce nonspecific sticking by passivating the unreacted gold with methoxy-(polyethylene glycol)-thiol. We routinely achieved single beads anchored to the nanoposts by single DNA molecules. We measured DNA's elasticity and its overstretching transition, demonstrating moderate- and high-force optical-trapping assays using gold-thiol chemistry. Force spectroscopy measurements were consistent with the rupture of the strepavidin-biotin bond between the bead and the DNA. This implied that the DNA remained anchored to the surface due to the strong gold-thiol bond. Consistent with this conclusion, we repeatedly reattached the trapped bead to the same individual DNA molecule. Thus, surface conjugation of biomolecules onto an array of gold nanostructures by chemically and mechanically robust bonds provides a unique way to carry out spatially controlled, repeatable measurements of single molecules.

Positioning multiple proteins at the nanoscale with electron beam cross-linked functional polymers

Constructing multicomponent protein structures that match the complexity of those found in nature is essential for the next generation of medical materials. In this report, a versatile method for precisely arranging multicomponent protein nanopatterns in two-dimensional single-layer or three-dimensional multilayer formats using electron beam lithography is described. Eight-arm poly(ethylene glycol)s (PEGs) were modified at the chain ends with either biotin, maleimide, aminooxy, or nitrilotriacetic acid. Analysis by 1H NMR spectroscopy revealed that the reactions were efficient and that end-group conversions were 91-100%. The polymers were then cross-linked onto Si surfaces using electron beams to form micron-sized patterns of the functional groups. Proteins with biotin binding sites, a free cysteine, an N-terminal alpha-oxoamide, and a histidine tag, respectively, were then incubated with the substrate in aqueous solutions without the addition of any other reagents. By fluorescence microscopy experiments it was determined that proteins reacted site-specifically with the exposed functional groups to form micropatterns. Multicomponent nanoscale protein patterns were then fabricated. Different PEGs with orthogonal reactivities were sequentially patterned on the same chip. Simultaneous assembly of two different proteins from a mixture of the biomolecules formed the multicomponent two-dimensional patterns. Atomic force microscopy demonstrated that nanometer-sized polymer patterns were formed, and fluorescence microscopy demonstrated that side-by-side patterns of the different proteins were obtained. Moreover, multilayer PEG fabrication produced micron- and nanometer-sized patterns of one functional group on top of the other. Precise three-dimensional arrangements of different proteins were then realized.

Torsional stiffness of single superparamagnetic microspheres in an external magnetic field

We used magnetic tweezers to measure the torsional stiffness of single micrometer-sized superparamagnetic spheres as a function of the applied magnetic field. By investigating the axial fluctuations of DNA-bound microspheres, we found that considerable rotational microsphere fluctuations can occur. Quantitative noise analysis allowed us to determine the rotational stiffness of individual microspheres, which was found to saturate at high magnetic fields. The saturation can be qualitatively explained considering the properties of the magnetic nanoparticles within the microsphere. Consequences for spatial resolution limits in single-molecule magnetic tweezer experiments and usage of DNA mechanics as a sensitive probe in magnetometry are discussed.

Tailored electroactive nanorods for biospecific cell adhesion and differentiation

We report a strategy for the fabrication of tailored electroactive nanorod substrates for biospecific studies of cell adhesion and stem cell differentiation; to control the interfacial properties of the nanorods we formed self-assembled monolayers of an electroactive hydroquinone group that is able to chemoselectively immobilize oxyamine tethered ligands.

Nanopatterning of fibronectin and the influence of integrin clustering on endothelial cell spreading and proliferation

Investigating stages of maturation of cellular adhesions to the extracellular matrix from the initial binding events to the formation of small focal complexes has been challenging because of the difficulty in fabricating the necessary nanopatterned substrates with controlled biochemical functionality. We present the fabrication and characterization of surfaces presenting fibronectin nanopatterns of controlled size and pitch that provide well-defined cellular adhesion sites against a nonadhesive polyethylene glycol background. The nanopatterned surfaces allow us to control the number of fibronectin proteins within each adhesion site from 9 to 250, thereby limiting the number of integrins involved in each cell-substrate adhesion. We demonstrate the presence of fibronectin on the nanoislands, while no protein was observed on the passivated background. We show that the cell adheres to the nanopatterns with adhesions that are much smaller and more evenly distributed than on a glass control. The nanopattern influences cellular proliferation only at longer times, but influences spreading at both early and later times, indicating adhesion size and adhesion density play a role in controlling cell adhesion and signaling. However, the overall density of fibronectin on all patterns is far lower than on homogeneously coated control surfaces, showing that the local density of adhesion ligands, not the average density, is the important parameter for cell proliferation and spreading.

Cooperativity in adhesion cluster formation during initial cell adhesion

We have studied the initial phase of cell adhesion as a function of the lateral organization of individual integrin molecules with single-cell force microscopy. Nanostructures, consisting of hexagonally ordered gold dots, were prepared with diblock-copolymer micelle lithography and functionalized with arginine- glycine-aspartate peptides, thus defining integrin position with nanometer resolution. Adhesion strength was characterized with an atomic force microscope and both cell detachment forces and work of detachment showed a reinforcement of adhesion if the distance between integrin molecules was <70 nm. This reinforcement had already occurred at cell-substrate contact times <5 min. We believe our results show quantitatively the relevance of the distance between adjacent integrin binding sites rather than their density. Furthermore, we propose a model describing the cooperative stabilization of early integrin clusters as a function of receptor patterning at the nanoscale.