Responsive multidomain free-standing films of gold nanoparticles assembled by DNA-directed layer-by-layer approach

Nanoenzyme Hydrogel Film-Based Portable Point-of-Care Testing Platform for Double-Signal Visual Detection of PSA

The development of the Point-of-Care Testing (POCT) platform that combines convenience and cost-effectiveness is crucial for enabling the visual detection of disease biomarkers. In this work, a POCT platform for the sensitive in situ detection of prostate specific antigen (PSA) with dual-signal output was constructed by functionalizing the Eppendorf (EP) tube. This was achieved through the modification of aptamer hairpin probes (AHPs) on the lid of the EP tube and the assembly of a nanoenzyme hydrogel film on its inner wall. The target could trigger the release of Ag+ by AHP and subsequently activate Ag+-dependent DNAzyme (Ag-DNAzyme). This would initiate the cleavage of the DNA-Au/Pt NP hydrogel network, leading to the release of Au/Pt NPs. The released Au/Pt NPs exhibit both peroxidase (POD)-like and catalase (CAT)-like activity to produce a colorimetric response and induce liquid flow under pressure. Therefore, the target can be measured visually and quantitatively through colorimetric analysis and the measurement of total dissolved solids (TDS) using a pressure-triggered liquid flow device integrated into the platform. The designed platform is distinguished by its simplicity, specificity, cost-effectiveness, and remarkable sensitivity. It allows for the visual detection of PSA within concentration ranges of 0.5-100 ng/L (colorimetric) and 3-100 ng/L (TDS reading), boasting detection limits as low as 0.15 ng/L (colorimetric) and 0.57 ng/L (TDS reading). The strategy of target-triggered nanoenzyme release significantly enhances sensitivity and provides a guiding approach for visual biomarker detection.

Domain-Selective Enzymatic Cross-linking and Etching for Shape-Morphing DNA-Linked Nanoparticle Films

The highly programmable and responsive molecular recognition properties of DNA provide unparalleled opportunities for fabricating dynamic nanostructures capable of structural transformation in response to various external stimuli. However, they typically operate in tightly controlled environments because certain conditions (ionic strength, pH, temperature, etc.) must be met for DNA duplex formation. In this study, we adopted site-specific enzymatic ligation and DNA-based layer-by-layer thin film fabrication to build shape-morphing DNA-linked nanoparticle films operational in a broad range of environments. The ligated films remained intact in unusual conditions such as pure water and high temperature causing dissociation of DNA duplexes and showed predictable and reversible shape morphing in response to various environmental changes and DNA exchange reactions. Furthermore, domain-selective ligation combined with photoinduced interlayer mixing allowed for the fabrication of unusual edge-sealed double-layered films through midlayer etching, which is difficult to realize by other methods.

Controlling Colloidal Crystal Nucleation and Growth with Photolithographically Defined Templates

Colloidal crystallization provides a means to synthesize hierarchical nanostructures by design and to use these complex structures for nanodevice fabrication. In particular, DNA provides a means to program interactions between particles with high specificity, thereby enabling the formation of particle superlattice crystallites with tailored unit cell geometries and surface faceting. However, while DNA provides precise control of particle-particle bonding interactions, it does not inherently present a means of controlling higher-level structural features such as the size, shape, position, or orientation of a colloidal crystallite. While altering assembly parameters such as temperature or concentration can enable limited control of crystallite size and geometry, integrating colloidal assemblies into nanodevices requires better tools to manipulate higher-order structuring and improved understanding of how these tools control the fundamental kinetics and mechanisms of colloidal crystal growth. In this work, photolithography is used to produce patterned substrates that can manipulate the placement, size, dispersity, and orientation of colloidal crystals. By adjusting aspects of the pattern, such as feature size and separation, we reveal a diffusion-limited mechanism governing crystal nucleation and growth. Leveraging this insight, patterns are designed that can produce wafer-scale substrates with arrays of nanoparticle superlattices of uniform size and shape. These design principles therefore bridge a gap between a fundamental understanding of nanoparticle assembly and the fabrication of nanostructures compatible with functional devices.

A portable colorimetric point-of-care testing platform for MicroRNA detection based on programmable entropy-driven dynamic DNA network modulated DNA-gold nanoparticle hybrid hydrogel film

Point-of-care testing (POCT) platforms for microRNA (miRNA) detection have attracted considerable attention in recent years, due to the increasingly important role of miRNA as biomarkers for the diagnosis of many diseases, such as cancers. However, several limitations such as the requirement of enzyme-related amplification system, expensive preservation cost, sophisticated analysis instruments and tedious operations of conventional miRNA biosensing devices severely hinder their widespread applications. In this work, a portable and smart colorimetric analysis platform was developed by employing the ultrathin DNA-gold nanoparticle (AuNP) hybrid hydrogel film as the signaling unit and the enzyme-free entropy-driven dynamic DNA network (EDN) as the signal converter and amplification unit. By programming the DNA sequences of the EDN, the EDN could respond to a specific miRNA, with miRNA-155 or miRNA-21 as the model target, and release a converter DNA with amplified concentration to further trigger the release of AuNPs from the hydrogel film as a colorimetric signal output. To avoid the use of sophisticated spectral instruments, digital analysis based on primary three-color channel (R/G/B) was further introduced by using user-friendly camera and image processing software, and a detection limit at pM level was achieved. Moreover, by introducing H₂O₂-mediated AuNPs enlargement procedure in the colorimetric analysis platform, the detection limit for miRNA target could further be enhanced to fM level. The POCT platform is also portable and storable with a good storage stability for at least 45 days, suggesting its great potential in practical diagnosis applications.

Tuning the Packing Density of Gold Nanoparticles in Peptoid Nanosheets Prepared at the Oil-Water Interface

Two-dimensional (2D) arrays of gold nanoparticles that can freely float in water are promising materials for solution-based plasmonic applications like sensing. To be effective sensors, it is critical to control the interparticle gap distance and thus the plasmonic properties of the 2D arrays. Here, we demonstrate excellent control over the interparticle gap distance in a family of freely floating gold nanoparticle-embedded peptoid nanosheets. Nanosheets are made via monolayer assembly and collapse at the oil-water interface, allowing for fine control over the solution nanoparticle concentration during assembly. We used surface pressure measurements to monitor the assembly of the peptoid, nanoparticle, and combined system at the oil-water interface to determine a workable range of nanosheet assembly conditions suitable for controlling the interparticle gap distances within the nanosheets. These measurements revealed that the extent of nanoparticle adsorption to the peptoid monolayer can be tuned by varying the bulk nanoparticle concentration, but the ability for the monolayer to collapse into nanosheets is compromised at high nanoparticle concentrations. Peptoid nanosheets were synthesized with varying bulk nanoparticle concentrations and analyzed using light microscopy and UV-visible spectroscopy. Based on the spectral shift of the localized surface plasmon resonance peaks for the nanoparticles in the nanosheets relative to those well dispersed in toluene, we estimate that we can access interparticle gap distances within the nanosheet interior between 2.9 ± 0.5 and 9 ± 2 nm. Our results suggest that the minimum interparticle distance achievable by this method is limited by the nanoparticle ligand length, and so has the potential to be further tuned by varying the ligand chemical structure. The ability to quantitatively control and monitor the assembly conditions by this method provide an opportunity to readily tune the optoelectronic properties of this new class of 2D nanomaterial, making it a promising platform for plasmonic-based sensing applications.

Smart DNA-gold nanoparticle hybrid hydrogel film based portable, cost-effective and storable biosensing system for the colorimetric detection of lead (II) and uranyl ions

A portable, cost-effective and storable DNA-gold nanoparticle (AuNP) hybrid hydrogel film based biosensing system was developed, with AuNPs serving as both the crosslinking units of the film and the signaling units. Using a layer-by-layer assembly method, hydrogel film composed of three-dimensional hydrophilic network of densely packed AuNPs interconnected by responsive DNA structures was constructed onto a glass slide. By programming the sequence of DNA structures, target-responsive hybrid films were constructed. As a proof of concept, the sequence of a substrate DNA which can be identified and cleaved by Pb²⁺-dependent DNAzyme was encoded to construct Pb²⁺-responsive DNA-AuNP hybrid hydrogel film. The high-density packing of AuNPs as signal substances significantly improved the sensitivity of the ultrathin film biosensing system while reduced the cost of expensive DNA materials. A hydrogel film composed of 10 layers of assembled DNA-AuNP structures generated sufficient visual colorimetric signals for Pb²⁺ detection, with a detection limit of 2.6 nM. By introducing UO₂²⁺-dependent DNAzyme, the system could be further applied in the sensitive and selective detection of UO₂²⁺, with a detection limit of 10.3 nM. Compared with bulk-sized DNA hydrogel biosensing systems, the DNA-AuNP hydrogel film biosensing system exhibited faster response thanks to the sub-micrometer ultrathin film structures. Moreover, the protection of fragile non-covalently crosslinked DNA films with solid slides also facilitated the portable application and long-term storage of the resulting biosensing system, with 95% of the response signal retained after three months of storage. The DNA-AuNPs hydrogel film biosensing system is highly promising for future rapid on-site detection applications.

Shape-Changing DNA-Linked Nanoparticle Films Dictated by Lateral and Vertical Patterns

The self-assembly of nanoscale building blocks into complex nanostructures with controlled structural anisotropy can open up new opportunities for realizing active nanomaterials exhibiting spatiotemporal structural transformations. Here, a combination of bottom-up DNA-directed self-assembly and top-down photothermal patterning is adopted to fabricate free-standing nanoparticle films with vertical and lateral heterogeneity. This approach involves the construction of multicomponent plasmonic nanoparticle films by DNA-directed layer-by-layer (LbL) self-assembly, followed by on-demand lateral patterning by the direct photothermal writing method. The distinct plasmonic properties of nanospheres and nanorods constituting the multidomain films enable photopatterning in a selective domain with precisely controlled vertical depths. The photopatterned films exhibit complex morphing actions instructed by the lateral and vertical patterns inscribed in the film as well as the information carried in DNA.

DNA-mediated assembly of gold-nanoparticle film with controllable sonic behaviors detected by novel electric-induced ultrasound

Two-dimensional gold assembled nanomaterials have garnered considerable interests in biomedical application such as wearable sensors and flexible devices. The assembly can be accomplished via attractive interactions between gold nanoparticles (GNPs)...

Controlled Assembly of Plasmonic Nanoparticles: From Static to Dynamic Nanostructures

The spatial arrangement of plasmonic nanoparticles can dramatically affect their interaction with electromagnetic waves, which offers an effective approach to systematically control their optical properties and manifest new phenomena. To this end, significant efforts were made to develop methodologies by which the assembly structure of metal nanoparticles can be controlled with high precision. Herein, recent advances in bottom-up chemical strategies toward the well-controlled assembly of plasmonic nanoparticles, including multicomponent and multifunctional systems are reviewed. Further, it is discussed how the progress in this area has paved the way toward the construction of smart dynamic nanostructures capable of on-demand, reversible structural changes that alter their properties in a predictable and reproducible manner. Finally, this review provides insight into the challenges, future directions, and perspectives in the field of controlled plasmonic assemblies.

Synthesis and characterization of plasmonic peptoid nanosheets

Solvated two-dimensional (2D) arrays of gold nanoparticles (AuNPs) are versatile plasmonic materials that are not limited by the constraints of a solid support. We report here the assembly of AuNP-embedded peptoid nanosheets via monolayer collapse at the liquid-liquid interface. This synthesis route produces a new class of solvated 2D plasmonic arrays and has the potential to be extended to a variety of different nanoparticle systems.

Macroscopic two-dimensional monolayer films of gold nanoparticles: fabrication strategies, surface engineering and functional applications

In the last few decades, two-dimensional monolayer films of gold nanoparticles (2D MFGS) have attracted increasing attention in various fields, due to their superior attributes of macroscopic size and accessible fabrication, controllable electromagnetic enhancement, distinctive optical harvesting and electron transport capabilities. This review will focus on the recent progress of 2D monolayer films of gold nanoparticles in construction approaches, surface engineering strategies and functional applications in the optical and electric fields. The research challenges and prospective directions of 2D MFGS are also discussed. This review would promote a better understanding of 2D MFGS and establish a necessary bridge among the multidisciplinary research fields.

Covalent-Cross-Linked Plasmene Nanosheets

Thiol-polystyrene (SH-PS)-capped plasmonic nanoparticles can be fabricated into free-standing, one-nanoparticle-thick superlattice sheets (termed plasmene) based on physical entanglement between ligands, which, however, suffer from irreversible dissociation in organic solvents. To address this issue, we introduce coumarin-based photo-cross-linkable moieties to the SH-PS ligands to stabilize gold nanoparticles. Once cross-linked, the obtained plasmene nanosheets consisting of chemically locked nanoparticles can well maintain structural integrity in organic solvents. Particularly, arising from ligand-swelling-induced enlargement of the interparticle spacing, these plasmene nanosheets show significant optical responses to various solvents in a specific as well as reversible manner, which may offer an excellent material for solvent sensing and dynamic plasmonic display.

Dynamic Nanostructures from DNA-Coupled Molecules, Polymers, and Nanoparticles

Dynamic and reconfigurable systems that can sense and react to physical and chemical signals are ubiquitous in nature and are of great interest in diverse areas of science and technology. DNA is a powerful tool for fabricating such smart materials and devices due to its programmable and responsive molecular recognition properties. For the past couple of decades, DNA-based self-assembly is actively explored to fabricate various DNA-organic and DNA-inorganic hybrid nanostructures with high-precision structural control. Building upon past development, researchers have recently begun to design and assemble dynamic nanostructures that can undergo an on-demand transformation in the structure, properties, and motion in response to various external stimuli. In this Review, recent advances in dynamic DNA nanostructures, focusing on hybrid structures fabricated from DNA-conjugated molecules, polymers, and nanoparticles, are introduced, and their potential applications and future perspectives are discussed.

Dendrimer-grafted bioreducible polycation/DNA multilayered films with low cytotoxicity and high transfection ability

Controlled release of incorporated foreign DNA from multilayered films plays an important role in surface-mediated gene delivery. Herein, multilayered polyelectrolyte complex thin films, composed of dendrimer-grafted bio-reducible cationic poly(disulfide amine) and plasmid DNA, were fabricated via layer-by-layer (LBL) assembly for in vitro localized gene delivery. The UV absorbance and thickness of the LBL films were found to have linear correlation with the numbers of poly(disulfide amine)/DNA bilayers. Although LBL films were stable in PBS buffer, their degradation could be triggered by reducing agents (i.e. glutathione, GSH). The degradation rate of the films is directly proportional to the GSH concentration, which in turn affected the corresponding gene expression. All poly(disulfide amine)/DNA films exhibited lower cytotoxicity and higher transfection activity in comparison with PEI/DNA multilayered films. Moreover, LBL films showed the highest transfection efficiency in the presence of 2.5 mM GSH when cultured with 293T cells, with ~36% GFP-positive 293T cells after 5-days of co-culture. These DNA-containing reducible films could potentially be useful in gene therapy and tissue engineering by controlling the release of incorporated DNA.

DNA-Functionalized 100 nm Polymer Nanoparticles from Block Copolymer Micelles

DNA-mediated self-assembly of colloidal particles is one of the most promising approaches for constructing colloidal superstructures. For nanophotonic materials and devices, DNA-functionalized colloids with diameters of around 100 nm are essential building blocks. Here, we demonstrate a strategy for synthesizing DNA-functionalized polymer nanoparticles (DNA-polyNPs) in the size range of 55-150 nm using block copolymer micelles as a template. Diblock copolymers of polystyrene- b-poly(ethylene oxide) with an azide end group (PS- b-PEO-N₃) are first formed into spherical micelles. Then, the micelle cores are swollen with the styrene monomer and polymerized, thus producing PS NPs with PEO brushes and azide functional end groups. DNA strands are conjugated onto the ends of the PEO brushes through a strain-promoted alkyne-azide cycloaddition reaction, resulting in a DNA density of more than one DNA strand per 12.6 nm² for 70 nm particles. The DNA-polyNPs with complementary sequences enable the formation of CsCl-type colloidal superstructure by DNA binding.

Liquid interfaces with pH-switchable nanoparticle arrays

Stimuli-responsive 2D nanoscale systems offer intriguing opportunities for creating switchable interfaces. At liquid interfaces, such systems can provide control over interfacial energies, surface structure, and rheological and transport characteristics, which is relevant, for example, to bio- and chemical reactors, microfluidic devices, and soft robotics. Here, we explore the formation of a pH-responsive membrane formed from gold nanoparticles grafted with DNA (DNA-NPs) at a liquid-vapor interface. A DNA-NP 2D hexagonal lattice can be reversibly switched by pH modulation between an expanded state of non-connected nanoparticles at neutral pH and a contracted state of linked nanoparticles at acidic pH due to the AH+-H+A base pairing between A-motifs. Our in situ surface X-ray scattering studies reveal that the reversible lattice contraction can be tuned by the length of pH-activated linkers, with up to ∼71% change in surface area.

Optical Properties of Reconfigurable Polymer/Silver Nanoprism Hybrids: Tunable Color and Infrared Scattering Contrast

We synthesize and characterize stimulus-responsive nanocomposites consisting of poly( N-isopropylacrylamide) (PNIPAM) with controlled loadings of anisotropic plate-like silver nanoprisms. These composites show strong, reversible switching of their optical extinction and scattering properties in response to temperature cycling. We use UV-vis-NIR spectroscopy and dynamic light scattering to characterize the hybrids and show that the loading density of the silver nanoprisms in the polymer and the size of the nanoprisms are both factors that can be used to tailor the optical response of the composites, extending the range of colors beyond that previously reported with PNIPAM/plasmonic nanoparticle composites. These PNIPAM/silver nanoprism hybrids exhibit thermochromic shifts that are 5-10 times larger than those typically reported for similar structures of PNIPAM composites with silver nanoparticles of a comparable range of loading density. In addition, we show that these composites can exhibit very large ratiometric changes in scattering in the NIR, which could open applications for related materials in thermal management and NIR labeling and taggants.

Supra-Nanoparticle Functional Assemblies through Programmable Stacking

The quest for the by-design assembly of material and devices from nanoscale inorganic components is well recognized. Conventional self-assembly is often limited in its ability to control material morphology and structure simultaneously. Here, we report a general method of assembling nanoparticles in a linear "pillar" morphology with regulated internal configurations. Our approach is inspired by supramolecular systems, where intermolecular stacking guides the assembly process to form diverse linear morphologies. Programmable stacking interactions were realized through incorporation of DNA coded recognition between the designed planar nanoparticle clusters. This resulted in the formation of multilayered pillar architectures with a well-defined internal nanoparticle organization. By controlling the number, position, size, and composition of the nanoparticles in each layer, a broad range of nanoparticle pillars were assembled and characterized in detail. In addition, we demonstrated the utility of this stacking assembly strategy for investigating plasmonic and electrical transport properties.

Shape changing thin films powered by DNA hybridization

Active materials that respond to physical and chemical stimuli can be used to build dynamic micromachines that lie at the interface between biological systems and engineered devices. In principle, the specific hybridization of DNA can be used to form a library of independent, chemically driven actuators for use in such microrobotic applications and could lead to device capabilities that are not possible with polymer- or metal-layer-based approaches. Here, we report shape changing films that are powered by DNA strand exchange reactions with two different domains that can respond to distinct chemical signals. The films are formed from DNA-grafted gold nanoparticles using a layer-by-layer deposition process. Films consisting of an active and a passive layer show rapid, reversible curling in response to stimulus DNA strands added to solution. Films consisting of two independently addressable active layers display a complex suite of repeatable transformations, involving eight mechanochemical states and incorporating self-righting behaviour.

Multimodal Shape Transformation of Dual-Responsive DNA Block Copolymers

Herein, we report the self-assembly and multimodal shape transformation of dual-responsive DNA di- and triblock copolymers. Dual-responsive DNA diblock copolymer was synthesized by coupling a thermoresponsive polymer, poly(N-isopropylacrylamide (PNIPAM), and an oligonucleotide. DNA-b-PNIPAM possesses thermoresponsive properties of PNIPAM as well as molecular recognition properties of DNA. Thus, they undergo reversible temperature-triggered transition at lower critical solution temperature (LCST) between molecular DNA and polymer micelles with high density DNA corona. The hybridization of DNA-b-PNIPAM and DNA-modified nanoparticles generates functional nanoparticles showing unique temperature-dependent aggregation and disaggregation behaviors due to the dual-responsive nature of DNA-b-PNIPAM. DNA triblock copolymers of DNA-b-PNIPAM-b-PMA were synthesized by introducing a hydrophobic block, poly(methyl acrylate) (PMA), to DNA/PNIPAM block copolymers, which form spherical micelles at room temperature. They are capable of nanoscale shape transformation through the combination of thermal trigger and DNA binding. DNA-b-PNIPAM-b-PMA micelles undergo sphere-to-cylinder shape changes above LCST due to the conformational change of PNIPAM. The shape change is reversible, and fast cylinder-to-sphere transition occurs when the temperature is lowered below LCST. The low temperature spherical morphology can also be accessed while keeping the temperature above LCST by introducing complementary DNA strands with single stranded overhang regions. These results demonstrate the multidimensional shape changing capability of DNA-b-PNIPAM-b-PMA enabled by the dual-responsive property.

Electronic Activation of a DNA Nanodevice Using a Multilayer Nanofilm

A method to control activation of a DNA nanodevice by supplying a complementary DNA (cDNA) strand from an electro-responsive nanoplatform is reported. To develop functional nanoplatform, hexalayer nanofilm is precisely designed by layer-by-layer assembly technique based on electrostatic interaction with four kinds of materials: Hydrolyzed poly(β-amino ester) can help cDNA release from the film. A cDNA is used as a key building block to activate DNA nanodevice. Reduced graphene oxides (rGOs) and the conductive polymer provide conductivity. In particular, rGOs efficiently incorporate a cDNA in the film via several interactions and act as a barrier. Depending on the types of applied electronic stimuli (reductive and oxidative potentials), a cDNA released from the electrode can quantitatively control the activation of DNA nanodevice. From this report, a new system is successfully demonstrated to precisely control DNA release on demand. By applying more advanced form of DNA-based nanodevices into multilayer system, the electro-responsive nanoplatform will expand the availability of DNA nanotechnology allowing its improved application in areas such as diagnosis, biosensing, bioimaging, and drug delivery.

Self-Assembly of Colloidal Nanocrystals: From Intricate Structures to Functional Materials

Chemical methods developed over the past two decades enable preparation of colloidal nanocrystals with uniform size and shape. These Brownian objects readily order into superlattices. Recently, the range of accessible inorganic cores and tunable surface chemistries dramatically increased, expanding the set of nanocrystal arrangements experimentally attainable. In this review, we discuss efforts to create next-generation materials via bottom-up organization of nanocrystals with preprogrammed functionality and self-assembly instructions. This process is often driven by both interparticle interactions and the influence of the assembly environment. The introduction provides the reader with a practical overview of nanocrystal synthesis, self-assembly, and superlattice characterization. We then summarize the theory of nanocrystal interactions and examine fundamental principles governing nanocrystal self-assembly from hard and soft particle perspectives borrowed from the comparatively established fields of micrometer colloids and block copolymer assembly. We outline the extensive catalog of superlattices prepared to date using hydrocarbon-capped nanocrystals with spherical, polyhedral, rod, plate, and branched inorganic core shapes, as well as those obtained by mixing combinations thereof. We also provide an overview of structural defects in nanocrystal superlattices. We then explore the unique possibilities offered by leveraging nontraditional surface chemistries and assembly environments to control superlattice structure and produce nonbulk assemblies. We end with a discussion of the unique optical, magnetic, electronic, and catalytic properties of ordered nanocrystal superlattices, and the coming advances required to make use of this new class of solids.

Scaffold and scaffold-free self-assembled systems in regenerative medicine

Self-assembly in tissue engineering refers to the spontaneous chemical or biological association of components to form a distinct functional construct, reminiscent of native tissue. Such self-assembled systems have been widely used to develop platforms for the delivery of therapeutic and/or bioactive molecules and various cell populations. Tissue morphology and functional characteristics have been recapitulated in several self-assembled constructs, designed to incorporate stimuli responsiveness and controlled architecture through spatial confinement or field manipulation. In parallel, owing to substantial functional properties, scaffold-free cell-assembled devices have aided in the development of functional neotissues for various clinical targets. Herein, we discuss recent advancements and future aspirations in scaffold and scaffold-free self-assembled devices for regenerative medicine purposes. Biotechnol. Bioeng. 2016;113: 1155-1163. © 2015 Wiley Periodicals, Inc.

Nanocoating for biomolecule delivery using layer-by-layer self-assembly

Since its introduction in the early 1990s, layer-by-layer (LbL) self-assembly of films has been widely used in the fields of nanoelectronics, optics, sensors, surface coatings, and controlled drug delivery. The growth of this industry is propelled by the ease of film manufacture, low cost, mild assembly conditions, precise control of coating thickness, and versatility of coating materials. Despite the wealth of research on LbL for biomolecule delivery, clinical translation has been limited and slow. This review provides an overview of methods and mechanisms of loading biomolecules within LbL films and achieving controlled release. In particular, this review highlights recent advances in the development of LbL coatings for the delivery of different types of biomolecules including proteins, polypeptides, DNA, particles and viruses. To address the need for co-delivery of multiple types of biomolecules at different timing, we also review recent advances in incorporating compartmentalization into LbL assembly. Existing obstacles to clinical translation of LbL technologies and enabling technologies for future directions are also discussed.

Conformal, macroscopic crystalline nanoparticle sheets assembled with DNA

A novel method for preparing conformal silica-embedded crystalline nanoparticle sheets via DNA programmable assembly provides independent control over nanoparticle size, nanoparticle spacing, and film thickness. The conformal materials retain the nanoparticle crystallinity and spacing after being transferred to flat or highly curved substrates even after being subjected to various mechanical, physical, and chemical stimuli.

Nanostructured Architectures by Assembling Polysaccharide-Coated BSA Nanoparticles for Biomedical Application

Nanostructured architectures are produced on Ti surfaces by layer-by layer (LbL) self-assembling of polysaccharide-coated BSA nanoparticles (BNPs), which created cellular microenvironments mimicking natural extracellular matrix. The BMP-2 encapsulated BNPs are prepared by a desolvation method, and are further coated by chitosan (CHI) coatings to obtain positively charged NPs (CBNPs). Vancomycin (Van) encapsulated CBNPs are obtained by the same method and subsequently coated by oxidized alginate (OALG) to obtain negatively charged NPs (OCBNPs). The CBNPs and OCBNPs are assembled on Ti surfaces to construct nanostructured coatings via electrostatic and covalent interactions. The nanostructured architectures realize the sustained release of BMP-2 and Van for a long term. Bone marrow stromal cells (BMSCs) culture tests confirm that the bare nanostructured architectures intrinsically facilitate attachment, proliferation, and differentiation of cells, which is attributed to the nanoscale porous structures that are similar to the size of cellular filopodia. Incorporating BMP-2 into the nanostructured architectures significantly enhances osteogenetic differentiation of BMSCs, which reveals the synergistic effects of nanostructures and growth factors on cell activity. The antibacterial tests indicate that controlled release of Van has good antibacterial ability against Staphylococcus epidermidis, while not affecting the normal biological activity of BMSCs.

Ion-modulated flow behavior of layer-by-layer fabricated polymer thin films

Flow behavior of polymer thin films which can be facilely tuned by ions is reported.

Novel biodegradable poly(propylene fumarate)-co-poly(l-lactic acid) porous scaffolds fabricated by phase separation for tissue engineering applications

Scaffolds with intrinsically interconnected porous structures are highly desirable in tissue engineering and regenerative medicine. In this study, three-dimensional polymer scaffolds with highly interconnected porous structures were fabricated by thermally induced phase separation of novel synthesized biodegradable poly(propylene fumarate)-co-poly(l-lactic acid) in a dioxane/water binary system. Defined porous scaffolds were achieved by optimizing conditions to attain interconnected porous structures. The effect of phase separation parameters on scaffold morphology were investigated, including polymer concentration (1, 3, 5, 7, and 9%), quench time (1, 4, and 8 min), dioxane/water ratio (83/17, 85/15, and 87/13 wt/wt), and freeze temperature (-20, -80, and -196 °C). Interesting pore morphologies were created by adjusting these processing parameters, e.g., flower-shaped (5%; 85/15; 1 min; -80 °C), spherulite-like (5%; 85/15; 8 min; -80 °C), and bead-like (5%; 87/13; 1 min; -80 °C) morphology. Modulation of phase separation conditions also resulted in remarkable differences in scaffold porosities (81% to 91%) and thermal properties. Furthermore, scaffolds with varied mechanic strengths, degradation rates, and protein adsorption capabilities could be fabricated using the phase separation method. In summary, this work provides an effective route to generate multi-dimensional porous scaffolds that can be applied to a variety of hydrophobic polymers and copolymers. The generated scaffolds could potentially be useful for various tissue engineering applications including bone tissue engineering.

Binding, structure, and dynamics of hydrophobic polymers near patterned self-assembled monolayer surfaces

We use molecular dynamics simulations to study the binding, conformations, and dynamics of a flexible 25-mer hydrophobic polymer near well-defined patterned self-assembled monolayers containing a hydrophobic strip (with -CH3 head-groups) having different widths in a hydrophilic (-OH) background. We show that the polymer binds favorably to hydrophobic strips of all widths, including the subnanometer ones comprising 3, 2, or even 1 row of -CH3 head-groups, with the binding strength varying from about 107 to 25 kJ/mol for the widest to the narrowest strip. Near wide hydrophobic patches containing 5 or more -CH3 rows, pancakelike conformations are dominant, whereas hairpinlike structures become preferred ones near the narrower strips. In the vicinity of the narrowest 1-row strip, the polymer folds into semiglobular conformations, thus maintaining sufficient contact with the strip while sequestering its hydrophobic groups away from water. We also show that the confinement makes the translational dynamics of the polymer anisotropic as well as conformational dependent. Our results may help to understand and manipulate the self-assembly and dynamics of soft matter, such as polymers, peptides, and proteins, at inhomogeneous patterned surfaces.