1
|
Liu Z, Ding H, Qi L, Wang J, Li Y, Liu L, Feng G, Zhang L. Core-Shell NiS@SrTiO 3 Nanorods on Titanium for Enhanced Osseointegration via Programmed Regulation of Bacterial Infection, Angiogenesis, and Osteogenesis. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37920934 DOI: 10.1021/acsami.3c11995] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/04/2023]
Abstract
Developing bone implants with dynamic self-adjustment of antibacterial, angiogenic, and osteogenic functions in line with a bone regenerative cascade is highly required in orthopedics. Herein, a unique core-shell nanorods array featuring a thin layer of NiS coated on each SrTiO3 nanorod (NiS@SrTiO3) was in situ constructed on titanium (Ti) through a two-step hydrothermal treatment. Under near-infrared (NIR) irradiation, the photoresponsive effect of NiS layer in synergy with the physical perforation of SrTiO3 nanorods initially enabled in vitro antibacterial rates of 96.5% to Escherichia coli and 93.1% to Staphylococcus aureus. With the degradation of the NiS layer, trace amounts of Ni ions were released, which accelerated angiogenesis by upregulating the expression of vascular regeneration-related factors, while the gradual exposure of SrTiO3 nanorods could simultaneously enhance the surface hydrophilicity in favor of cell adhesion and slowly release Sr ions to promote the proliferation and differentiation of MC3T3-E1 cells. The in vivo assessment verified not only the satisfactory antibacterial effect but also the superior osteogenic ability of the NiS@SrTiO3/Ti group with the aid of NIR irradiation, finally promoting the osseointegration of the Ti implant. The modification method endowing Ti implant with antibacterial, angiogenic, and osteogenic functions provides a new strategy to improve the long-term reliability of Ti-based devices.
Collapse
Affiliation(s)
- Zheng Liu
- Analytical & Testing Center, Department of Orthopedic Surgery & Orthopedic Research Institute, and West China Hospital, Sichuan University, Chengdu 610065, P. R. China
| | - Hong Ding
- Analytical & Testing Center, Department of Orthopedic Surgery & Orthopedic Research Institute, and West China Hospital, Sichuan University, Chengdu 610065, P. R. China
| | - Lin Qi
- Analytical & Testing Center, Department of Orthopedic Surgery & Orthopedic Research Institute, and West China Hospital, Sichuan University, Chengdu 610065, P. R. China
| | - Jing Wang
- Analytical & Testing Center, Department of Orthopedic Surgery & Orthopedic Research Institute, and West China Hospital, Sichuan University, Chengdu 610065, P. R. China
| | - Yubao Li
- Analytical & Testing Center, Department of Orthopedic Surgery & Orthopedic Research Institute, and West China Hospital, Sichuan University, Chengdu 610065, P. R. China
| | - Limin Liu
- Analytical & Testing Center, Department of Orthopedic Surgery & Orthopedic Research Institute, and West China Hospital, Sichuan University, Chengdu 610065, P. R. China
| | - Ganjun Feng
- Analytical & Testing Center, Department of Orthopedic Surgery & Orthopedic Research Institute, and West China Hospital, Sichuan University, Chengdu 610065, P. R. China
| | - Li Zhang
- Analytical & Testing Center, Department of Orthopedic Surgery & Orthopedic Research Institute, and West China Hospital, Sichuan University, Chengdu 610065, P. R. China
| |
Collapse
|
2
|
Chan WS, Gulati K, Peters OA. Advancing Nitinol: From heat treatment to surface functionalization for nickel–titanium (NiTi) instruments in endodontics. Bioact Mater 2023; 22:91-111. [PMID: 36203965 PMCID: PMC9520078 DOI: 10.1016/j.bioactmat.2022.09.008] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2022] [Revised: 09/04/2022] [Accepted: 09/09/2022] [Indexed: 11/27/2022] Open
Abstract
Nickel-titanium (NiTi) alloy has been extensively researched in endodontics, particularly in cleaning and shaping the root canal system. Research advances have primarily focused on the design, shape, and geometry of the NiTi files as well as metallurgy and mechanical properties. So far, extensive investigations have been made surrounding surface and thermomechanical treatments, however, limited work has been done in the realm of surface functionalization to augment its performance in endodontics. This review summarizes the unique characteristics, current use, and latest developments in thermomechanically treated NiTi endodontic files. It discusses recent improvements in nano-engineering and the possibility of customizing the NiTi file surface for added functionalization. Whilst clinical translation of this technology has yet to be fully realized, future research direction will lie in the use of nanotechnology. Nitinol (Nickel Titanium alloy) is widely used to clean/shape root canal system in endodontics. To enhance its performance, various thermo-mechanical and nano-engineering modifications have been performed. This comprehensive review summarizes the latest advances and future trends relating to functionalized NiTi endodontic files.
Collapse
|
3
|
Wang Y, Xue F, Li Y, Lin L, Wang Y, Zhao S, Zhao X, Liu Y, Tan J, Li G, Xiao H, Yan J, Tian H, Liu M, Zhang Q, Ba Z, He L, Zhao W, Zhu C, Zeng W. Programming of Regulatory T Cells In Situ for Nerve Regeneration and Long-Term Patency of Vascular Grafts. Research (Wash D C) 2022; 2022:9826426. [PMID: 35966759 PMCID: PMC9351587 DOI: 10.34133/2022/9826426] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/23/2022] [Accepted: 06/22/2022] [Indexed: 11/25/2022] Open
Abstract
Rapid integration into the host tissue is critical for long-term patency after small diameter tissue engineering vascular grafts (sdTEVGs) transplantation. Neural recognition may be required for host integration and functionalization of the graft. However, immune rejection and inflammation hinder nerve regeneration of sdTEVGs. Here, a CRISPR/dCas9-nanocarrier was used for targeted programming of regulatory T cells (Treg cells) in situ to promote nerve regeneration of sdTEVGs by preventing excessive inflammation. Treg cells and (C-C chemokine receptor) CCR2+ macrophage recruitment occurred after transplantation. The nanodelivery system upregulated ten eleven translocation (TET2) in Treg cells in vitro. Reprogrammed Treg cells upregulated anti-inflammatory cytokines and decreased the proportion of CCR2+ macrophages. IL-6 concentrations decreased to the levels required for nerve regeneration. Implantation of CRISPR/dCas9 nanodelivery system-modified sdTEVGs in rats resulted in Treg cell editing, control of excessive inflammation, and promoted nerve regeneration. After 3 months, nerve regeneration was similar to that observed in normal blood vessels; good immune homeostasis, consistency of hemodynamics, and matrix regeneration were observed. Neural recognition promotes further integration of the graft into the host, with unobstructed blood vessels without intimal hyperplasia. Our findings provide new insights into vascular implant functionalization by the host.
Collapse
Affiliation(s)
- Yanhong Wang
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Fangchao Xue
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Yanzhao Li
- Department of Anatomy, National and Regional Engineering Laboratory of Tissue Engineering, State and Local Joint Engineering Laboratory for Vascular Implants, Key Lab for Biomechanics and Tissue Engineering of Chongqing, Third Military Medical University, Chongqing 400038, China
| | - Lin Lin
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Yeqin Wang
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Shanlan Zhao
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Xingli Zhao
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Yong Liu
- Department of Anatomy, National and Regional Engineering Laboratory of Tissue Engineering, State and Local Joint Engineering Laboratory for Vascular Implants, Key Lab for Biomechanics and Tissue Engineering of Chongqing, Third Military Medical University, Chongqing 400038, China
| | - Ju Tan
- Department of Anatomy, National and Regional Engineering Laboratory of Tissue Engineering, State and Local Joint Engineering Laboratory for Vascular Implants, Key Lab for Biomechanics and Tissue Engineering of Chongqing, Third Military Medical University, Chongqing 400038, China
| | - Gang Li
- Department of Anatomy, National and Regional Engineering Laboratory of Tissue Engineering, State and Local Joint Engineering Laboratory for Vascular Implants, Key Lab for Biomechanics and Tissue Engineering of Chongqing, Third Military Medical University, Chongqing 400038, China
| | - Haoran Xiao
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Juan Yan
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Hao Tian
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Min Liu
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Qiao Zhang
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Zhaojing Ba
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Lang He
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Wenyan Zhao
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
| | - Chuhong Zhu
- Department of Anatomy, National and Regional Engineering Laboratory of Tissue Engineering, State and Local Joint Engineering Laboratory for Vascular Implants, Key Lab for Biomechanics and Tissue Engineering of Chongqing, Third Military Medical University, Chongqing 400038, China
| | - Wen Zeng
- Department of Cell Biology, Third Military Army Medical University, Chongqing 400038, China
- State Key Laboratory of Trauma, Burn and Combined Injury, Chongqing, China
- Departments of Neurology, Southwest Hospital, Third Military Medical University, Chongqing, China
| |
Collapse
|
4
|
Wu B, Tang Y, Wang K, Zhou X, Xiang L. Nanostructured Titanium Implant Surface Facilitating Osseointegration from Protein Adsorption to Osteogenesis: The Example of TiO 2 NTAs. Int J Nanomedicine 2022; 17:1865-1879. [PMID: 35518451 PMCID: PMC9064067 DOI: 10.2147/ijn.s362720] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/18/2022] [Accepted: 04/20/2022] [Indexed: 02/05/2023] Open
Abstract
Titanium implants have been widely applied in dentistry and orthopedics due to their biocompatibility and resistance to mechanical fatigue. TiO2 nanotube arrays (TiO2 NTAs) on titanium implant surfaces have exhibited excellent biocompatibility, bioactivity, and adjustability, which can significantly promote osseointegration and participate in its entire path. In this review, to give a comprehensive understanding of the osseointegration process, four stages have been divided according to pivotal biological processes, including protein adsorption, inflammatory cell adhesion/inflammatory response, additional relevant cell adhesion and angiogenesis/osteogenesis. The impact of TiO2 NTAs on osseointegration is clarified in detail from the four stages. The nanotubular layer can manipulate the quantity, the species and the conformation of adsorbed protein. For inflammatory cells adhesion and inflammatory response, TiO2 NTAs improve macrophage adhesion on the surface and induce M2-polarization. TiO2 NTAs also facilitate the repairment-related cells adhesion and filopodia formation for additional relevant cells adhesion. In the angiogenesis and osteogenesis stage, TiO2 NTAs show the ability to induce osteogenic differentiation and the potential for blood vessel formation. In the end, we propose the multi-dimensional regulation of TiO2 NTAs on titanium implants to achieve highly efficient manipulation of osseointegration, which may provide views on the rational design and development of titanium implants.
Collapse
Affiliation(s)
- Bingfeng Wu
- State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, Sichuan, People's Republic of China
| | - Yufei Tang
- State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, Sichuan, People's Republic of China.,Department of Orthodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, Sichuan, People's Republic of China
| | - Kai Wang
- School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, People's Republic of China
| | - Xuemei Zhou
- School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, People's Republic of China
| | - Lin Xiang
- State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, Sichuan, People's Republic of China.,Department of Oral Implantology, West China Hospital of Stomatology, Sichuan University, Chengdu, Sichuan, People's Republic of China
| |
Collapse
|
5
|
Schieber R, Mas-Moruno C, Lasserre F, Roa JJ, Ginebra MP, Mücklich F, Pegueroles M. Effectiveness of Direct Laser Interference Patterning and Peptide Immobilization on Endothelial Cell Migration for Cardio-Vascular Applications: An In Vitro Study. NANOMATERIALS 2022; 12:nano12071217. [PMID: 35407334 PMCID: PMC9002369 DOI: 10.3390/nano12071217] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/26/2021] [Revised: 03/25/2022] [Accepted: 03/28/2022] [Indexed: 12/12/2022]
Abstract
Endothelial coverage of an exposed cardiovascular stent surface leads to the occurrence of restenosis and late-stent thrombosis several months after implantation. To overcome this difficulty, modification of stent surfaces with topographical or biochemical features may be performed to increase endothelial cells’ (ECs) adhesion and/or migration. This work combines both strategies on cobalt-chromium (CoCr) alloy and studies the potential synergistic effect of linear patterned surfaces that are obtained by direct laser interference patterning (DLIP), coupled with the use of Arg-Gly-Asp (RGD) and Tyr-Ile-Gly-Ser-Arg (YIGSR) peptides. An extensive characterization of the modified surfaces was performed by using AFM, XPS, surface charge, electrochemical analysis and fluorescent methods. The biological response was studied in terms of EC adhesion, migration and proliferation assays. CoCr surfaces were successfully patterned with a periodicity of 10 µm and two different depths, D (≈79 and 762 nm). RGD and YIGSR were immobilized on the surfaces by CPTES silanization. Early EC adhesion was increased on the peptide-functionalized surfaces, especially for YIGSR compared to RGD. High-depth patterns generated 80% of ECs’ alignment within the topographical lines and enhanced EC migration. It is noteworthy that the combined use of the two strategies synergistically accelerated the ECs’ migration and proliferation, proving the potential of this strategy to enhance stent endothelialization.
Collapse
Affiliation(s)
- Romain Schieber
- Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), Av. Eduard Maristany, 10-14, 08019 Barcelona, Spain; (R.S.); (C.M.-M.); (M.-P.G.)
- Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya (UPC), 08019 Barcelona, Spain;
- Chair of Functional Materials, Faculty of Natural Sciences and Technology, Saarland University, 66123 Saarbrücken, Germany; (F.L.); (F.M.)
| | - Carlos Mas-Moruno
- Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), Av. Eduard Maristany, 10-14, 08019 Barcelona, Spain; (R.S.); (C.M.-M.); (M.-P.G.)
- Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya (UPC), 08019 Barcelona, Spain;
| | - Federico Lasserre
- Chair of Functional Materials, Faculty of Natural Sciences and Technology, Saarland University, 66123 Saarbrücken, Germany; (F.L.); (F.M.)
| | - Joan Josep Roa
- Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya (UPC), 08019 Barcelona, Spain;
- Structural Integrity, Micromechanics and Reliability of Materials Group, Department of Materials Science and Metallurgical Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), 08019 Barcelona, Spain
| | - Maria-Pau Ginebra
- Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), Av. Eduard Maristany, 10-14, 08019 Barcelona, Spain; (R.S.); (C.M.-M.); (M.-P.G.)
- Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya (UPC), 08019 Barcelona, Spain;
- Institute for Bioengineering of Catalonia (IBEC), 08028 Barcelona, Spain
| | - Frank Mücklich
- Chair of Functional Materials, Faculty of Natural Sciences and Technology, Saarland University, 66123 Saarbrücken, Germany; (F.L.); (F.M.)
| | - Marta Pegueroles
- Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya (UPC), Av. Eduard Maristany, 10-14, 08019 Barcelona, Spain; (R.S.); (C.M.-M.); (M.-P.G.)
- Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya (UPC), 08019 Barcelona, Spain;
- Correspondence: ; Tel.: +34-934-054-154
| |
Collapse
|
6
|
OUP accepted manuscript. Metallomics 2022; 14:6515965. [DOI: 10.1093/mtomcs/mfac002] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2021] [Accepted: 01/14/2022] [Indexed: 11/14/2022]
|
7
|
Dong J, Pacella M, Liu Y, Zhao L. Surface engineering and the application of laser-based processes to stents - A review of the latest development. Bioact Mater 2021; 10:159-184. [PMID: 34901537 PMCID: PMC8636930 DOI: 10.1016/j.bioactmat.2021.08.023] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2021] [Revised: 08/04/2021] [Accepted: 08/20/2021] [Indexed: 12/21/2022] Open
Abstract
Late in-stent thrombus and restenosis still represent two major challenges in stents’ design. Surface treatment of stent is attracting attention due to the increasing importance of stenting intervention for coronary artery diseases. Several surface engineering techniques have been utilised to improve the biological response in vivo on a wide range of biomedical devices. As a tailorable, precise, and ultra-fast process, laser surface engineering offers the potential to treat stent materials and fabricate various 3D textures, including grooves, pillars, nanowires, porous and freeform structures, while also modifying surface chemistry through nitridation, oxidation and coatings. Laser-based processes can reduce the biodegradable materials' degradation rate, offering many advantages to improve stents’ performance, such as increased endothelialisation rate, prohibition of SMC proliferation, reduced platelet adhesion and controlled corrosion and degradation. Nowadays, adequate research has been conducted on laser surface texturing and surface chemistry modification. Laser texturing on commercial stents has been also investigated and a promotion of performance of laser-textured stents has been proved. In this critical review, the influence of surface texture and surface chemistry on stents performance is firstly reviewed to understand the surface characteristics of stents required to facilitate cellular response. This is followed by the explicit illustration of laser surface engineering of stents and/or related materials. Laser induced periodic surface structure (LIPSS) on stent materials is then explored, and finally the application of laser surface modification techniques on latest generation of stent devices is highlighted to provide future trends and research direction on laser surface engineering of stents. Compared conventional surface engineering with laser-based methods for biomedical devices. Explained the influence of texture geometry and surface chemistry on stents biological response. Reviewed state of the art in laser surface engineering of stents for improved biological response. Reviewed state of the art in laser surface engineering to control degradation of bioresorbable stents. Highlighted novel laser surface engineering designs for improved stents'performance.
Collapse
Affiliation(s)
- J Dong
- Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
| | - M Pacella
- Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
| | - Y Liu
- Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK.,Centre for Biological Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
| | - L Zhao
- Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
| |
Collapse
|
8
|
Cherian AM, Nair SV, Maniyal V, Menon D. Surface engineering at the nanoscale: A way forward to improve coronary stent efficacy. APL Bioeng 2021; 5:021508. [PMID: 34104846 PMCID: PMC8172248 DOI: 10.1063/5.0037298] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/12/2020] [Accepted: 04/26/2021] [Indexed: 12/12/2022] Open
Abstract
Coronary in-stent restenosis and late stent thrombosis are the two major inadequacies of vascular stents that limit its long-term efficacy. Although restenosis has been successfully inhibited through the use of the current clinical drug-eluting stent which releases antiproliferative drugs, problems of late-stent thrombosis remain a concern due to polymer hypersensitivity and delayed re-endothelialization. Thus, the field of coronary stenting demands devices having enhanced compatibility and effectiveness to endothelial cells. Nanotechnology allows for efficient modulation of surface roughness, chemistry, feature size, and drug/biologics loading, to attain the desired biological response. Hence, surface topographical modification at the nanoscale is a plausible strategy to improve stent performance by utilizing novel design schemes that incorporate nanofeatures via the use of nanostructures, particles, or fibers, with or without the use of drugs/biologics. The main intent of this review is to deliberate on the impact of nanotechnology approaches for stent design and development and the recent advancements in this field on vascular stent performance.
Collapse
Affiliation(s)
- Aleena Mary Cherian
- Amrita Centre for Nanosciences and Molecular Medicine, Amrita
Vishwa Vidyapeetham, Ponekkara P.O. Cochin 682041, Kerala,
India
| | - Shantikumar V. Nair
- Amrita Centre for Nanosciences and Molecular Medicine, Amrita
Vishwa Vidyapeetham, Ponekkara P.O. Cochin 682041, Kerala,
India
| | - Vijayakumar Maniyal
- Department of Cardiology, Amrita Institute of Medical Science
and Research Centre, Amrita Vishwa Vidyapeetham, Ponekkara P.O. Cochin
682041, Kerala, India
| | - Deepthy Menon
- Amrita Centre for Nanosciences and Molecular Medicine, Amrita
Vishwa Vidyapeetham, Ponekkara P.O. Cochin 682041, Kerala,
India
| |
Collapse
|
9
|
Liu W, Zhang G, Wu J, Zhang Y, Liu J, Luo H, Shao L. Insights into the angiogenic effects of nanomaterials: mechanisms involved and potential applications. J Nanobiotechnology 2020; 18:9. [PMID: 31918719 PMCID: PMC6950937 DOI: 10.1186/s12951-019-0570-3] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2019] [Accepted: 12/31/2019] [Indexed: 12/18/2022] Open
Abstract
The vascular system, which transports oxygen and nutrients, plays an important role in wound healing, cardiovascular disease treatment and bone tissue engineering. Angiogenesis is a complex and delicate regulatory process. Vascular cells, the extracellular matrix (ECM) and angiogenic factors are indispensable in the promotion of lumen formation and vascular maturation to support blood flow. However, the addition of growth factors or proteins involved in proangiogenic effects is not effective for regulating angiogenesis in different microenvironments. The construction of biomaterial scaffolds to achieve optimal growth conditions and earlier vascularization is undoubtedly one of the most important considerations and major challenges among engineering strategies. Nanomaterials have attracted much attention in biomedical applications due to their structure and unique photoelectric and catalytic properties. Nanomaterials not only serve as carriers that effectively deliver factors such as angiogenesis-related proteins and mRNA but also simulate the nano-topological structure of the primary ECM of blood vessels and stimulate the gene expression of angiogenic effects facilitating angiogenesis. Therefore, the introduction of nanomaterials to promote angiogenesis is a great helpful to the success of tissue regeneration and some ischaemic diseases. This review focuses on the angiogenic effects of nanoscaffolds in different types of tissue regeneration and discusses the influencing factors as well as possible related mechanisms of nanomaterials in endothelial neovascularization. It contributes novel insights into the design and development of novel nanomaterials for vascularization and therapeutic applications.
Collapse
Affiliation(s)
- Wenjing Liu
- Stomatological Hospital, Southern Medical University, Guangzhou, 510280, China
| | - Guilan Zhang
- Stomatological Hospital, Southern Medical University, Guangzhou, 510280, China
| | - Junrong Wu
- Stomatological Hospital, Southern Medical University, Guangzhou, 510280, China
| | - Yanli Zhang
- Stomatological Hospital, Southern Medical University, Guangzhou, 510280, China
| | - Jia Liu
- Stomatological Hospital, Southern Medical University, Guangzhou, 510280, China
| | - Haiyun Luo
- Stomatological Hospital, Southern Medical University, Guangzhou, 510280, China
| | - Longquan Shao
- Stomatological Hospital, Southern Medical University, Guangzhou, 510280, China.
- Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, 510515, China.
| |
Collapse
|
10
|
Jang TS, Lee JH, Kim S, Park C, Song J, Jae HJ, Kim HE, Chung JW, Jung HD. Ta ion implanted nanoridge-platform for enhanced vascular responses. Biomaterials 2019; 223:119461. [PMID: 31518843 DOI: 10.1016/j.biomaterials.2019.119461] [Citation(s) in RCA: 16] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2019] [Revised: 08/24/2019] [Accepted: 08/29/2019] [Indexed: 12/26/2022]
Abstract
Bare metal stents are commonly used in interventional cardiology; they provide successful treatment because of their excellent mechanical properties, expandability ratios, and flexibility. However, their insufficient vascular affinity can induce the development of neointimal hyperplasia following arterial injury and subsequent smooth muscle cell overgrowth in the lumen of a stented vessel. Nanoengineering of the bare metal stent surface is a valuable strategy for eliciting favorable vascular responses. In this study, we introduce a target-ion-induced plasma sputtering (TIPS) technique to fabricate a platform with a favorable endothelial environment. This technique enables the simple single-step production of a Ta-implanted nanoridged surface on a stent with a complex 3D geometry that shows a clear tendency to become oriented parallel to the direction of blood flow. Moreover, the nanoridges developed show good structural integrity and mechanical stability, resulting in apparently stable morphologies under high strain rates. In vitro cellular responses to the Co-Cr, such as endothelialization, platelet activation, and blood coagulation, are considerably altered after TIPS treatment; endothelium formation is rapid and surface thrombogenicity is low. An in vivo rabbit iliac artery model is used to confirm that the nanoridged surface facilitates rapid re-endothelialization and limits the formation of neointima compared to the bare stent. These results indicate that the Ta ion implanted nanoridge platform fabricated using the TIPS technique has immense potential as a solution for in-stent restenosis and ensuring the long-term patency of bare metal stents.
Collapse
Affiliation(s)
- Tae-Sik Jang
- Research Institute of Advanced Manufacturing Technology, Korea Institute of Industrial Technology, Incheon, 21999, South Korea
| | - Jae Hwan Lee
- Department of Radiology, Seoul National University Bundang Hospital, Seongnam, 13620, South Korea
| | - Sungwon Kim
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, South Korea
| | - Cheonil Park
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, South Korea
| | - Juha Song
- School of Chemical and Biomedical Engineering, Nanyang Technological University, 70 Nanyang Drive, 637457, Singapore
| | - Hwan Jun Jae
- Department of Radiology, Seoul National University College of Medicine, Seoul, 03080, South Korea
| | - Hyoun-Ee Kim
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, South Korea
| | - Jin Wook Chung
- Department of Radiology, Seoul National University College of Medicine, Seoul, 03080, South Korea
| | - Hyun-Do Jung
- Research Institute of Advanced Manufacturing Technology, Korea Institute of Industrial Technology, Incheon, 21999, South Korea.
| |
Collapse
|
11
|
Shang P, Chen G, Zu G, Song X, Jiao P, You G, Zhao J, Li H, Zhou H. Long noncoding RNA expression analysis reveals the regulatory effects of nitinol-based nanotubular coatings on human coronary artery endothelial cells. Int J Nanomedicine 2019; 14:3297-3309. [PMID: 31190794 PMCID: PMC6519025 DOI: 10.2147/ijn.s204067] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2019] [Accepted: 04/04/2019] [Indexed: 11/24/2022] Open
Abstract
Background: Cardiovascular disease (CVD) is the leading cause of mortality all over the world. Vascular stents are used to ameliorate vascular stenosis and recover vascular function. The application of nanotubular coatings has been confirmed to promote endothelial cell (EC) proliferation and function. However, the regulatory mechanisms involved in cellular responses to the nanotubular topography have not been defined. In the present study, a microarray analysis was performed to explore the expression patterns of long noncoding RNAs (lncRNAs) in human coronary artery endothelial cells (HCAECs) that were differentially expressed in response to nitinol-based nanotubular coatings. Materials and methods: First, anodization was performed to synthesize nitinol-based nanotubular coatings. Then, HCAECs were cultured on the samples for 24 h to evaluate cell cytoskeleton organization. Next, total RNA was extracted and synthesized into cRNA, which was hybridized onto the microarray. GO analysis and KEGG pathway analysis were performed to investigate the roles of differentially expressed messenger RNAs (mRNAs). Quantitative real-time reverse-transcription polymerase chain reaction (qRT-PCR) was performed to validate the expression of randomly selected lncRNAs. Coexpression networks were created to identify the interactions among lncRNAs and the protein-coding genes involved in nanotubular topography-induced biological and molecular pathways. Independent Student’s t-test was applied for comparisons between two groups with statistical significance set at p<0.05. Results: 1085 lncRNAs and 227 mRNAs were significantly differentially expressed in the nitinol-based nanotubular coating group. Bioinformatics analysis revealed that extracellular matrix receptor interactions and cell adhesion molecules play critical roles in the sensing of nitinol-based nanotubular coatings by HCAECs. The TATA-binding protein (TBP) and TBP-associated transfactor 1 (TAF1) are important molecules in EC responses to substrate topography. Conclusion: This study suggests that nanotubular substrate topography regulates ECs by differentially expressed lncRNAs involved extracellular matrix receptor interactions and cell adhesion molecules.
Collapse
Affiliation(s)
- Pan Shang
- Academy of Military Medical Sciences, Institute of Health Service and Transfusion Medicine, Beijing 100850, People's Republic of China
| | - Gan Chen
- Academy of Military Medical Sciences, Institute of Health Service and Transfusion Medicine, Beijing 100850, People's Republic of China
| | - Guannan Zu
- Photoelectrochemical Research Group, School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, People's Republic of China
| | - Xiang Song
- Academy of Military Medical Sciences, Institute of Health Service and Transfusion Medicine, Beijing 100850, People's Republic of China
| | - Peng Jiao
- Photoelectrochemical Research Group, School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, People's Republic of China
| | - Guoxing You
- Academy of Military Medical Sciences, Institute of Health Service and Transfusion Medicine, Beijing 100850, People's Republic of China
| | - Jingxiang Zhao
- Academy of Military Medical Sciences, Institute of Health Service and Transfusion Medicine, Beijing 100850, People's Republic of China
| | - Hongyi Li
- Photoelectrochemical Research Group, School of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, People's Republic of China
| | - Hong Zhou
- Academy of Military Medical Sciences, Institute of Health Service and Transfusion Medicine, Beijing 100850, People's Republic of China
| |
Collapse
|
12
|
Mohammadi F, Golafshan N, Kharaziha M, Ashrafi A. Chitosan-heparin nanoparticle coating on anodized NiTi for improvement of blood compatibility and biocompatibility. Int J Biol Macromol 2019; 127:159-168. [DOI: 10.1016/j.ijbiomac.2019.01.026] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/08/2018] [Revised: 12/30/2018] [Accepted: 01/05/2019] [Indexed: 02/04/2023]
|
13
|
Hang R, Liu S, Liu Y, Zhao Y, Bai L, Jin M, Zhang X, Huang X, Yao X, Tang B. Preparation, characterization, corrosion behavior and cytocompatibility of NiTiO 3 nanosheets hydrothermally synthesized on biomedical NiTi alloy. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2018; 97:715-722. [PMID: 30678960 DOI: 10.1016/j.msec.2018.12.124] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/09/2018] [Revised: 12/12/2018] [Accepted: 12/27/2018] [Indexed: 10/27/2022]
Abstract
The present work reports on the hydrothermal synthesis of nanosheets on biomedical NiTi alloy in pure water. The results show rhombohedral NiTiO3 nanosheets with thickness of 6 nm can be grown at 200 °C. Hydrothermal treatment enhances the corrosion resistance of the NiTi alloy. 30 min of the treatment significantly reduces Ni ion release, while prolonged hydrothermal time results in increased Ni ion release because of the growth of the nanosheets with large specific surface area. Excitingly, the nanosheets can well support cell growth, which suggests the release amount can be well tolerated. Good corrosion resistance and cytocompatibility combined with large specific surface area render the nanosheets promising as safe and efficient drug carriers of the biomedical NiTi alloy.
Collapse
Affiliation(s)
- Ruiqiang Hang
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
| | - Si Liu
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Yanlian Liu
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Ya Zhao
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Long Bai
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Minghan Jin
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Xiangyu Zhang
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Xiaobo Huang
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Xiaohong Yao
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
| | - Bin Tang
- Research Institute of Surface Engineering, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| |
Collapse
|
14
|
Hang R, Liu Y, Bai L, Zhang X, Huang X, Jia H, Tang B. Length-dependent corrosion behavior, Ni2+ release, cytocompatibility, and antibacterial ability of Ni-Ti-O nanopores anodically grown on biomedical NiTi alloy. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2018; 89:1-7. [DOI: 10.1016/j.msec.2018.03.018] [Citation(s) in RCA: 20] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/01/2017] [Revised: 01/16/2018] [Accepted: 03/20/2018] [Indexed: 11/26/2022]
|
15
|
|
16
|
Wu ML, Panduranga MK, Carman GP. Proliferation of human aortic endothelial cells on Nitinol thin films with varying hole sizes. Biomed Microdevices 2018; 20:25. [PMID: 29484503 DOI: 10.1007/s10544-018-0267-7] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
Abstract
In this paper, we present the effect of micron size holes on proliferation and growth of human aortic endothelial cells (HAECs). Square shaped micron size holes (5, 10, 15, 20 and 25 μm) separated by 10 μm wide struts are fabricated on 5 μm thick sputter deposited Nitinol films. HAECs are seeded onto these micropatterned films and analyzed after 30 days with fluorescence microscopy. Captured images are used to quantify the nucleus packing density, size, and aspect ratio. The films with holes ranging from 10 to 20 μm produce the highest cell packing densities with cell nucleus contained within the hole. This produces a geometrically regular grid like cellular distribution pattern. The cell nucleus aspect ratio on the 10-20 μm holes is more circular in shape when compared to aspect ratio on the continuous film or larger size holes. Finally, the 25 μm size holes prevented the formation of a continuous cell monolayer, suggesting the critical length that cells cannot bridge is between 20 to 25 μm.
Collapse
Affiliation(s)
- Ming Lun Wu
- Department of Bioengineering, University of California, Los Angeles, CA, 90095, USA.
| | - Mohanchandra K Panduranga
- Department of Aerospace & Mechanical Engineering, University of California, Los Angeles, CA, 90095, USA
| | - Gregory P Carman
- Department of Bioengineering, University of California, Los Angeles, CA, 90095, USA
- Department of Aerospace & Mechanical Engineering, University of California, Los Angeles, CA, 90095, USA
| |
Collapse
|
17
|
Tan CH, Muhamad N, Abdullah MMAB. Surface Topographical Modification of Coronary Stent: A Review. ACTA ACUST UNITED AC 2017. [DOI: 10.1088/1757-899x/209/1/012031] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
18
|
Nuhn H, Blanco CE, Desai TA. Nanoengineered Stent Surface to Reduce In-Stent Restenosis in Vivo. ACS APPLIED MATERIALS & INTERFACES 2017; 9:19677-19686. [PMID: 28574242 DOI: 10.1021/acsami.7b04626] [Citation(s) in RCA: 27] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
In-stent restenosis (ISR) is the leading cause of stent failure and is a direct result of a dysfunctional vascular endothelium and subsequent overgrowth of vascular smooth muscle tissue. TiO2 nanotubular (NT) arrays have been shown to affect vascular endothelial cells (VECs) and vascular smooth muscle cells (VSMCs) in vitro by accelerating VEC cell proliferation and migration while suppressing VSMCs. This study investigates for the first time the potentially beneficial effects of TiO2 NT arrays on vascular tissue in vivo. TiO2 NT arrays (NT diameter: 90 ± 5 nm, height: 1800 ± 300 nm) were grown on the surface of titanium stents and characterized in terms of surface morphology and stability. Stents were implanted into the iliofemoral artery using an overinflation model (rabbit). After 28 days, stenosis rates were determined. The data show a statistically significant reduction of stenosis by 30% compared to the control. Tissue in the presence of TiO2 NTs appears more mature, and less neointima is present between struts. In addition, the extra cellular matrix secreted by cells at the interface of the NT arrays shows complete integration into the nanostructured surface. These results document the accelerated restoration of a functional endothelium in the presence of TiO2 NT arrays and substantiate their beneficial impact on vascular tissue in vivo. Our findings suggest that TiO2 NT arrays can be used as a drug-free approach for keeping stents patent long-term and have the potential to address ISR.
Collapse
Affiliation(s)
- Harald Nuhn
- The Alfred E. Mann Institute for Biomedical Engineering at the University of Southern California , 1042 Downey Way, DRB Building, Suite 101, Los Angeles, California 90089-1112, United States
| | - Cesar E Blanco
- The Alfred E. Mann Institute for Biomedical Engineering at the University of Southern California , 1042 Downey Way, DRB Building, Suite 101, Los Angeles, California 90089-1112, United States
| | - Tejal A Desai
- Department of Bioengineering and Therapeutic Sciences and The UC Berkeley-UCSF Graduate Group in Bioengineering, University of California-San Francisco , San Francisco, California 94158, United States
| |
Collapse
|
19
|
Hang R, Zhao Y, Bai L, Liu Y, Gao A, Zhang X, Huang X, Tang B, Chu PK. Fabrication of irregular-layer-free and diameter-tunable Ni–Ti–O nanopores by anodization of NiTi alloy. Electrochem commun 2017. [DOI: 10.1016/j.elecom.2017.01.010] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
|
20
|
Bedair TM, ElNaggar MA, Joung YK, Han DK. Recent advances to accelerate re-endothelialization for vascular stents. J Tissue Eng 2017; 8:2041731417731546. [PMID: 28989698 PMCID: PMC5624345 DOI: 10.1177/2041731417731546] [Citation(s) in RCA: 63] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2017] [Accepted: 08/19/2017] [Indexed: 12/25/2022] Open
Abstract
Cardiovascular diseases are considered as one of the serious diseases that leads to the death of millions of people all over the world. Stent implantation has been approved as an easy and promising way to treat cardiovascular diseases. However, in-stent restenosis and thrombosis remain serious problems after stent implantation. It was demonstrated in a large body of previously published literature that endothelium impairment represents a major factor for restenosis. This discovery became the driving force for many studies trying to achieve an optimized methodology for accelerated re-endothelialization to prevent restenosis. Thus, in this review, we summarize the different methodologies opted to achieve re-endothelialization, such as, but not limited to, manipulation of surface chemistry and surface topography.
Collapse
Affiliation(s)
- Tarek M Bedair
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul, Korea
- Chemistry Department, Faculty of Science, Minia University, Minia, Egypt
| | - Mahmoud A ElNaggar
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul, Korea
- Department of Biomedical Engineering, Korea University of Science and Technology, Daejeon, Korea
| | - Yoon Ki Joung
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul, Korea
- Department of Biomedical Engineering, Korea University of Science and Technology, Daejeon, Korea
| | - Dong Keun Han
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul, Korea
- Department of Biomedical Engineering, Korea University of Science and Technology, Daejeon, Korea
- Department of Biomedical Science, CHA University, Gyeonggi, Korea
| |
Collapse
|
21
|
Hang R, Zong M, Bai L, Gao A, Liu Y, Zhang X, Huang X, Tang B, Chu PK. Anodic growth of ultra-long Ni-Ti-O nanopores. Electrochem commun 2016. [DOI: 10.1016/j.elecom.2016.08.002] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
|
22
|
Amin Yavari S, Loozen L, Paganelli FL, Bakhshandeh S, Lietaert K, Groot JA, Fluit AC, Boel CHE, Alblas J, Vogely HC, Weinans H, Zadpoor AA. Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surfaces Releasing Silver Ions. ACS APPLIED MATERIALS & INTERFACES 2016; 8:17080-17089. [PMID: 27300485 DOI: 10.1021/acsami.6b03152] [Citation(s) in RCA: 85] [Impact Index Per Article: 10.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Additive manufacturing (3D printing) has enabled fabrication of geometrically complex and fully interconnected porous biomaterials with huge surface areas that could be used for biofunctionalization to achieve multifunctional biomaterials. Covering the huge surface area of such porous titanium with nanotubes has been already shown to result in improved bone regeneration performance and implant fixation. In this study, we loaded TiO2 nanotubes with silver antimicrobial agents to equip them with an additional biofunctionality, i.e., antimicrobial behavior. An optimized anodizing protocol was used to create nanotubes on the entire surface area of direct metal printed porous titanium scaffolds. The nanotubes were then loaded by soaking them in three different concentrations (i.e., 0.02, 0.1, and 0.5 M) of AgNO3 solution. The antimicrobial behavior and cell viability of the developed biomaterials were assessed. As far as the early time points (i.e., up to 1 day) are concerned, the biomaterials were found to be extremely effective in preventing biofilm formation and decreasing the number of planktonic bacteria particularly for the middle and high concentrations of silver ions. Interestingly, nanotubes not loaded with antimicrobial agents also showed significantly smaller numbers of adherent bacteria at day 1, which may be attributed to the bactericidal effect of high aspect ratio nanotopographies. The specimens with the highest concentrations of antimicrobial agents adversely affected cell viability at day 1, but this effect is expected to decrease or disappear in the following days as the rate of release of silver ions was observed to markedly decrease within the next few days. The antimicrobial effects of the biomaterials, particularly the ones with the middle and high concentrations of antimicrobial agents, continued until 2 weeks. The potency of the developed biomaterials in decreasing the number of planktonic bacteria and hindering the formation of biofilms make them promising candidates for combating peri-operative implant-associated infections.
Collapse
Affiliation(s)
- S Amin Yavari
- Department of Orthopedics, University Medical Centre Utrecht , 3584 CX Utrecht, The Netherlands
- Department of Biomechanical Engineering, Delft University of Technology , 2628 CD Delft, The Netherlands
| | - L Loozen
- Department of Orthopedics, University Medical Centre Utrecht , 3584 CX Utrecht, The Netherlands
| | - F L Paganelli
- Department of Medical Microbiology, University Medical Center Utrecht , 3584 CX Utrecht, The Netherlands
| | - S Bakhshandeh
- Department of Biomechanical Engineering, Delft University of Technology , 2628 CD Delft, The Netherlands
| | - K Lietaert
- 3D Systems-LayerWise NV, 3001 Leuven, Belgium
- Department of Materials Engineering, Katholieke Universiteit Leuven , 3000 Leuven, Belgium
| | - J A Groot
- Department of Medical Microbiology, University Medical Center Utrecht , 3584 CX Utrecht, The Netherlands
| | - A C Fluit
- Department of Medical Microbiology, University Medical Center Utrecht , 3584 CX Utrecht, The Netherlands
| | - C H E Boel
- Department of Medical Microbiology, University Medical Center Utrecht , 3584 CX Utrecht, The Netherlands
| | - J Alblas
- Department of Orthopedics, University Medical Centre Utrecht , 3584 CX Utrecht, The Netherlands
| | - H C Vogely
- Department of Orthopedics, University Medical Centre Utrecht , 3584 CX Utrecht, The Netherlands
| | - H Weinans
- Department of Orthopedics, University Medical Centre Utrecht , 3584 CX Utrecht, The Netherlands
- Department of Biomechanical Engineering, Delft University of Technology , 2628 CD Delft, The Netherlands
- Department of Rheumatology, University Medical Centre Utrecht , 3584 CX Utrecht, The Netherlands
| | - A A Zadpoor
- Department of Biomechanical Engineering, Delft University of Technology , 2628 CD Delft, The Netherlands
| |
Collapse
|
23
|
Lee PP, Desai TA. Nitinol-Based Nanotubular Arrays with Controlled Diameters Upregulate Human Vascular Cell ECM Production. ACS Biomater Sci Eng 2016; 2:409-414. [PMID: 27942579 DOI: 10.1021/acsbiomaterials.5b00553] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Current approaches to reducing restenosis do not balance the reduction of vascular smooth muscle cell proliferation with the increase in the healing of the endothelium. Building on our previous work, we present our study on the effects of Nitinol-based nanotubular coatings with different nanotube diameters on the reduction of restenosis. Here, we demonstrate that the nanotubular coatings reduced primary human aortic smooth muscle cell (HASMC) proliferation and increased the migration (by more than 4 times), collagen (by 2-3 times per cell) and elastin (by 5-8 times per cell) production of primary human aortic endothelial cells (HAEC). Furthermore, a significant increase in elastin and soluble collagen production of HAEC was observed with an increase in nanotube diameter. Our findings suggest that nanotubes-coated Nitinol may provide a surface conducive for HAEC reendothelialization while reducing the proliferation of HASMC.
Collapse
Affiliation(s)
- Phin P Lee
- Department of Bioengineering and Therapeutic Sciences and The UC Berkeley-UCSF Graduate Group in Bioengineering, University of California-San Francisco, San Francisco, California 94158, United States
| | - Tejal A Desai
- Department of Bioengineering and Therapeutic Sciences and The UC Berkeley-UCSF Graduate Group in Bioengineering, University of California-San Francisco, San Francisco, California 94158, United States
| |
Collapse
|
24
|
Huan Z, Yu H, Li H, Ruiter MS, Chang J, Apachitei I, Duszczyk J, de Vries CJM, Fratila-Apachitei LE. The effects of plasma electrolytically oxidized NiTi on in vitro endothelialization. Colloids Surf B Biointerfaces 2016; 141:365-373. [PMID: 26878287 DOI: 10.1016/j.colsurfb.2016.02.001] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2015] [Revised: 01/08/2016] [Accepted: 02/01/2016] [Indexed: 02/04/2023]
Abstract
The role of biomaterials surface in controlling the interfacial biological events leading to implant integration is of key importance. In this study, the effects of NiTi surfaces treated by plasma electrolytic oxidation (PEO) on human umbilical vein endothelial cells (HUVECs) have been investigated. The changes in NiTi surface morphology and chemistry were assessed by SEM, XPS and cross-section TEM/EDX analyzes whereas the effects of the resultant surfaces on in vitro endothelialization and cell junction proteins have been evaluated by life/dead staining, SEM, cells counting, qPCR and immunofluorescence. The findings indicated that the PEO-treated NiTi, with a microporous morphology and oxide dominated surface chemistry, supports viability and proliferation of HUVECs. Numerous thin filopodia probing the microporous surface assisted cells attachment. In addition, claudin-5 and occludin have been upregulated and expression of vascular endothelial-cadherin was not suppressed on PEO-treated NiTi relative to the reference electropolished surfaces. The results of this study suggest that novel NiTi surfaces may be developed using the PEO process, which can be of benefit to atherosclerosis treatment.
Collapse
Affiliation(s)
- Z Huan
- Shanghai Institute of Ceramics, Chinese Academy of Sciences, 1295 Dingxi Road, Shanghai 200050, China
| | - H Yu
- Med-X Research Institute, School of Biomedical Engineering, Shanghai Jiao Tong University, 1954 Huashan Road, Shanghai 200030, China
| | - H Li
- Med-X Research Institute, School of Biomedical Engineering, Shanghai Jiao Tong University, 1954 Huashan Road, Shanghai 200030, China.
| | - M S Ruiter
- Department of Medical Biochemistry, Academic Medical Center, University of Amsterdam, Meibergdreef 15, 1105 AZ Amsterdam, The Netherlands
| | - J Chang
- Shanghai Institute of Ceramics, Chinese Academy of Sciences, 1295 Dingxi Road, Shanghai 200050, China; Med-X Research Institute, School of Biomedical Engineering, Shanghai Jiao Tong University, 1954 Huashan Road, Shanghai 200030, China
| | - I Apachitei
- Department of BioMechanical Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
| | - J Duszczyk
- Department of BioMechanical Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands
| | - C J M de Vries
- Department of Medical Biochemistry, Academic Medical Center, University of Amsterdam, Meibergdreef 15, 1105 AZ Amsterdam, The Netherlands
| | - L E Fratila-Apachitei
- Department of BioMechanical Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands.
| |
Collapse
|
25
|
Pang JH, Farhatnia Y, Godarzi F, Tan A, Rajadas J, Cousins BG, Seifalian AM. In situ Endothelialization: Bioengineering Considerations to Translation. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2015; 11:6248-64. [PMID: 26460851 DOI: 10.1002/smll.201402579] [Citation(s) in RCA: 50] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/27/2014] [Revised: 06/14/2015] [Indexed: 05/10/2023]
Abstract
Improving patency rates of current cardiovascular implants remains a major challenge. It is widely accepted that regeneration of a healthy endothelium layer on biomaterials could yield the perfect blood-contacting surface. Earlier efforts in pre-seeding endothelial cells in vitro demonstrated success in enhancing patency, but translation to the clinic is largely hampered due to its impracticality. In situ endothelialization, which aims to create biomaterial surfaces capable of self-endothelializing upon implantation, appears to be an extremely promising solution, particularly with the utilization of endothelial progenitor cells (EPCs). Nevertheless, controlling cell behavior in situ using immobilized biomolecules or physical patterning can be complex, thus warranting careful consideration. This review aims to provide valuable insight into the rationale and recent developments in biomaterial strategies to enhance in situ endothelialization. In particular, a discussion on the important bio-/nanoengineering considerations and lessons learnt from clinical trials are presented to aid the future translation of this exciting paradigm.
Collapse
Affiliation(s)
- Jun Hon Pang
- Centre for Nanotechnology & Regenerative Medicine, Division of Surgery & Interventional Science, University College London (UCL), London, UK
| | - Yasmin Farhatnia
- Centre for Nanotechnology & Regenerative Medicine, Division of Surgery & Interventional Science, University College London (UCL), London, UK
| | - Fatemeh Godarzi
- Centre for Nanotechnology & Regenerative Medicine, Division of Surgery & Interventional Science, University College London (UCL), London, UK
| | - Aaron Tan
- Centre for Nanotechnology & Regenerative Medicine, Division of Surgery & Interventional Science, University College London (UCL), London, UK
- UCL Medical School, University College London (UCL), London, UK
- Biomaterials & Advanced Drug Delivery Laboratory, Stanford School of Medicine, Stanford University, Stanford, California, USA
| | - Jayakumar Rajadas
- Biomaterials & Advanced Drug Delivery Laboratory, Stanford School of Medicine, Stanford University, Stanford, California, USA
| | - Brian G Cousins
- Centre for Nanotechnology & Regenerative Medicine, Division of Surgery & Interventional Science, University College London (UCL), London, UK
| | - Alexander M Seifalian
- Centre for Nanotechnology & Regenerative Medicine, Division of Surgery & Interventional Science, University College London (UCL), London, UK
- Royal Free Hospital, London, UK
- NanoRegMed Ltd, London, UK
| |
Collapse
|