Electronic transport of encapsulated graphene and WSe2 devices fabricated by pick-up of prepatterned hBN

Pressure tuning of minibands in MoS2/WSe2 heterostructures revealed by moiré phonons

Moiré superlattices of two-dimensional heterostructures arose as a new platform to investigate emergent behaviour in quantum solids with unprecedented tunability. To glean insights into the physics of these systems, it is paramount to discover new probes of the moiré potential and moiré minibands, as well as their dependence on external tuning parameters. Hydrostatic pressure is a powerful control parameter, since it allows to continuously and reversibly enhance the moiré potential. Here we use high pressure to tune the minibands in a rotationally aligned MoS2/WSe2 moiré heterostructure, and show that their evolution can be probed via moiré phonons. The latter are Raman-inactive phonons from the individual layers that are activated by the moiré potential. Moiré phonons manifest themselves as satellite Raman peaks arising exclusively from the heterostructure region, increasing in intensity and frequency under applied pressure. Further theoretical analysis reveals that their scattering rate is directly connected to the moiré potential strength. By comparing the experimental and calculated pressure-induced enhancement, we obtain numerical estimates for the moiré potential amplitude and its pressure dependence. The present work establishes moiré phonons as a sensitive probe of the moiré potential as well as the electronic structures of moiré systems.

Phonon-Mediated Quasiparticle Lifetime Renormalizations in Few-Layer Hexagonal Boron Nitride

Understanding the collective behavior of the quasiparticles in solid-state systems underpins the field of nonvolatile electronics, including the opportunity to control many-body effects for well-desired physical phenomena and their applications. Hexagonal boron nitride (hBN) is a wide-energy-bandgap semiconductor, showing immense potential as a platform for low-dimensional device heterostructures. It is an inert dielectric used for gated devices, having a negligible orbital hybridization when placed in contact with other systems. Despite its inertness, we discover a large electron mass enhancement in few-layer hBN affecting the lifetime of the π-band states. We show that the renormalization is phonon-mediated and consistent with both single- and multiple-phonon scattering events. Our findings thus unveil a so-far unknown many-body state in a wide-bandgap insulator, having important implications for devices using hBN as one of their building blocks.

First-principles study of the structural and electronic properties of tetragonal ZrOX (X = S, Se, and Te) monolayers and their vdW heterostructures for applications in optoelectronics and photocatalysis

Using first-principles calculations, we have studied the structural and electronic properties of ZrOX (X = S, Se, and Te) monolayers and their van der Waals heterostructures in the tetragonal structure. Our results show that these monolayers are dynamically stable and are semiconductors with electronic bandgaps ranging from 1.98 to 3.16 eV as obtained with the GW approximation. By computing their band edges, we show that ZrOS and ZrOSe are of interest for water splitting applications. In addition, the van der Waals heterostructures formed by these monolayers show a type I band alignment for ZrOTe/ZrOSe and a type II alignment for the other two heterostructures, making them potential candidates for certain optoelectronic applications involving electron/hole separation.

Engineered Two-Dimensional Nanostructures as SERS Substrates for Biomolecule Sensing: A Review

Two-dimensional nanostructures (2DNS) attract tremendous interest and have emerged as potential materials for a variety of applications, including biomolecule sensing, due to their high surface-to-volume ratio, tuneable optical and electronic properties. Advancements in the engineering of 2DNS and associated technologies have opened up new opportunities. Surface-enhanced Raman scattering (SERS) is a rapid, highly sensitive, non-destructive analytical technique with exceptional signal amplification potential. Several structurally and chemically engineered 2DNS with added advantages (e.g., π-π* interaction), over plasmonic SERS substrates, have been developed specifically towards biomolecule sensing in a complex matrix, such as biological fluids. This review focuses on the recent developments of 2DNS-SERS substrates for biomolecule sensor applications. The recent advancements in engineered 2DNS, particularly for SERS substrates, have been systematically surveyed. In SERS substrates, 2DNS are used as either a standalone signal enhancer or as support for the dispersion of plasmonic nanostructures. The current challenges and future opportunities in this synergetic combination have also been discussed. Given the prospects in the design and preparation of newer 2DNS, this review can give a critical view on the current status, challenges and opportunities to extrapolate their applications in biomolecule detection.

Constructing van der Waals heterostructures by dry-transfer assembly for novel optoelectronic device

Since the first successful exfoliation of graphene, the superior physical and chemical properties of two-dimensional (2D) materials, such as atomic thickness, strong in-plane bonding energy and weak inter-layer van der Waals (vdW) force have attracted wide attention. Meanwhile, there is a surge of interest in novel physics which is absent in bulk materials. Thus, vertical stacking of 2D materials could be critical to discover such physics and develop novel optoelectronic applications. Although vdW heterostructures have been grown by chemical vapor deposition, the available choices of materials for stacking is limited and the device yield is yet to be improved. Another approach to build vdW heterostructure relies on wet/dry transfer techniques like stacking Lego bricks. Although previous reviews have surveyed various wet transfer techniques, novel dry transfer techniques have been recently been demonstrated, featuring clean and sharp interfaces, which also gets rid of contamination, wrinkles, bubbles formed during wet transfer. This review summarizes the optimized dry transfer methods, which paves the way towards high-quality 2D material heterostructures with optimized interfaces. Such transfer techniques also lead to new physical phenomena while enable novel optoelectronic applications on artificial vdW heterostructures, which are discussed in the last part of this review.

Spin Ordering Induced Broadband Photodetection Based on Two-Dimensional Magnetic Semiconductor α-MnSe

Two-dimensional (2D) magnetic semiconductors are considered to have great application prospects in spintronic logic devices, memory devices, and photodetectors, due to their unique structures and outstanding physical properties in 2D confinement. Understanding the influence of magnetism on optical/optoelectronic properties of 2D magnetic semiconductors is a significant issue for constructing multifunctional electronic devices and implementing sophisticated functions. Herein, the influence of spin ordering and magnons on the optical/optoelectronic properties of 2D magnetic semiconductor α-MnSe synthesized by space-confined chemical vapor deposition (CVD) is explored systematically. The spin-ordering-induced magnetic phase transition triggers temperature-dependent photoluminescence spectra to produce a huge transition at Néel temperature (TN  ≈ 160 K). The magnons- and defects-induced emissions are the primary luminescence path below TN and direct internal 4 a T1g →6 A1g transition-induced emissions are the main luminescence path above TN . Additionally, the magnons and defect structures endow 2D α-MnSe with a broadband luminescence from 550 to 880 nm, and an ultraviolet-near-infrared photoresponse from 365 to 808 nm. Moreover, the device also demonstrates improved photodetection performance at 80 K, possibly influenced by spin ordering and trap states associated with defects. These above findings indicate that 2D magnetic semiconductor α-MnSe provides an excellent platform for magneto-optical and magneto-optoelectronic research.

Electronic Band Tuning and Multivalley Raman Scattering in Monolayer Transition Metal Dichalcogenides at High Pressures

Transition metal dichalcogenides (TMDs) possess spin-valley locking and spin-split K/K' valleys, which have led to many fascinating physical phenomena. However, the electronic structure of TMDs also exhibits other conduction band minima with similar properties, the Q/Q' valleys. The intervalley K-Q scattering enables interesting physical phenomena, including multivalley superconductivity, but those effects are typically hindered in monolayer TMDs due to the large K-Q energy difference (ΔE_KQ). To unlock elusive multivalley phenomena in monolayer TMDs, it is desirable to reduce ΔE_KQ, while being able to sensitively probe the valley shifts and the multivalley scattering processes. Here, we use high pressure to tune the electronic properties of monolayer MoS₂ and WSe₂ and probe K-Q crossing and multivalley scattering via double-resonance Raman (DRR) scattering. In both systems, we observed a pressure-induced enhancement of the double-resonance LA and 2LA Raman bands, which can be attributed to a band gap opening and ΔE_KQ decrease. First-principles calculations and photoluminescence measurements corroborate this scenario. In our analysis, we also addressed the multivalley nature of the DRR bands for WSe₂. Our work establishes the DRR 2LA and LA bands as sensitive probes of strain-induced modifications to the electronic structure of TMDs. Conversely, their intensity could potentially be used to monitor the presence of compressive or tensile strain in TMDs. Furthermore, the ability to probe K-K' and K-Q scattering as a function of strain shall advance our understanding of different multivalley phenomena in TMDs such as superconductivity, valley coherence, and valley transport.

Transition Metal Dichalcogenides (TMDCs) Heterostructures: Synthesis, Excitons and Photoelectric Properties

Transition metal dichalcogenides (TMDCs) have good flexibility, light absorption, and carrier mobility, and can be used to fabricate wearable devices and photodetectors. In addition, the band gaps of these materials are adjustable, which are related to the number of stacking layers. The the material properties can be changed by vertically stacking TMDCs to form van der Waals (vdW) heterostructures. Compared with single-layer TMDC, the vdW heterostructure has better light response and more efficient photoelectric conversion. Interlayer excitons formed in vdW heterostructure have a longer exciton lifetime and unique valley selectivity compared with intralayer excitons, which promotes the research on TMDCs materials in photoelectric field, valley electronics, carrier dynamics, etc. In this paper, the methods of synthesizing heterostructures are introduced. Photoelectric properties, valley dynamics, electronic properties and related applications of TMDCs vdW heterostructures are also discussed. Heterostructures stacked with different materials, stacking modes, and twist angles all can affect the properties. Hence, it brings more creativity and research direction to the material field.

Moiré superlattices and related moiré excitons in twisted van der Waals heterostructures

Recent advances in moiré superlattices and moiré excitons, such as quantum emission arrays, low-energy flat bands, and Mott insulators, have rapidly attracted attention in the fields of optoelectronics, materials, and energy research. The interlayer twist turns into a degree of freedom that alters the properties of the systems of materials, and the realization of moiré excitons also offers the feasibility of making artificial exciton crystals. Moreover, moiré excitons exhibit many exciting properties under the regulation of various external conditions, including spatial polarisation, alternating dipolar to alternating dipolar moments and gate-dependence to gate voltage dependence; all are pertinent to their applications in nano-photonics and quantum information. But the lag in theoretical development and the low-efficiency of processing technologies significantly limit the potential of moiré superlattice applications. In this review, we systematically summarise and discuss the recent progress in moiré superlattices and moiré excitons, and analyze the current challenges, and put forward relevant recommendations. There is no doubt that further research will lead to breakthroughs in their application and promote reforms and innovations in traditional solid-state physics and materials science.

Emerging Light-Emitting Materials for Photonic Integration

The arrival of the information explosion era is urging the development of large-bandwidth high-data-rate optical interconnection technology. Up to now, the biggest stumbling block in optical interconnections has been the lack of efficient light sources despite significant progress that has been made in germanium-on-silicon (Ge-on-Si) and III-V-on-silicon (III-V-on-Si) lasers. 2D materials and metal halide perovskites have attracted much attention in recent years, and exhibit distinctive advantages in the application of on-chip light emitters. Herein, this Progress Report reviews the recent progress made in light-emitting materials with a focus on new materials, i.e., 2D materials and metal halide perovskites. The report briefly introduces the current status of Ge-on-Si and III-V-on-Si lasers and discusses the advances of 2D and perovskite light-emitting materials for photonic integration, including their optical properties, preparation methods, as well as the light sources based on these materials. Finally, challenges and perspectives of these emerging materials on the way to the efficient light sources are discussed.

A Self-Powered Photovoltaic Photodetector Based on a Lateral WSe2-WSe2 Homojunction

Lateral homojunctions made of two-dimensional (2D) layered materials are promising for optoelectronic and electronic applications. Here, we report the lateral WSe₂-WSe₂ homojunction photodiodes formed spontaneously by thickness modulation in which there are unique band structures of a unilateral depletion region. The electrically tunable junctions can be switched from n-n to p-p diodes, and the corresponding rectification ratio increases from about 1 to 1.2 × 10⁴. In addition, an obvious photovoltaic behavior is observed at zero gate voltage, which exhibits a large open voltage of 0.49 V and a short-circuit current of 0.125 nA under visible light irradiation. In addition, due to the unilateral depletion region, the diode can achieve a high detectivity of 4.4 × 10¹⁰ Jones and a fast photoresponse speed of 0.18 ms at V_g = 0 and V_ds = 0. The studies not only demonstrated the great potential of the lateral homojunction photodiodes for a self-power photodetector but also allowed for the development of other functional devices, such as a nonvolatile programmable diode for logic rectifiers.

Electrically controllable router of interlayer excitons

Optoelectronic devices that allow rerouting, modulation, and detection of the optical signals would be extremely beneficial for telecommunication technology. One of the most promising platforms for these devices is excitonic devices, as they offer very efficient coupling to light. Of especial importance are those based on indirect excitons because of their long lifetime. Here, we demonstrate excitonic transistor and router based on bilayer WSe₂ Because of their strong dipole moment, excitons in bilayer WSe₂ can be controlled by transverse electric field. At the same time, unlike indirect excitons in artificially stacked heterostructures based on transition metal dichalcogenides, naturally stacked bilayers are much simpler in fabrication.

The Properties and Preparation Methods of Different Boron Nitride Nanostructures and Applications of Related Nanocomposites

Due to special non-metallic polar bond between the III group (with certain metallic properties) element boron (B) and the V group element nitrogen (N), boron nitride (BN) has unique physical and chemical properties such as strong high-temperature resistance, oxidation resistance, heat conduction, electrical insulation and neutron absorption. Its unique lamellar, reticular and tubular morphologies and physicochemical properties make it attractive in the fields of adsorption, catalysis, hydrogen storage, thermal conduction, insulation, dielectric substrate of electronic devices, radiation protection, polymer composites, medicine, etc. Therefore, the synthesis and properties of BN derived materials become the main research hotspots of low-dimensional nanomaterials. This paper reviews the synthetic methods, overall properties, and applications of BN nanostructures and nanocomposites. In addition, challenges and prospect of this kind of materials are discussed.

Thermal annealing effect on the electrical quality of graphene/hexagonal boron nitride heterostructure devices

The development of the dry transfer method provides an abundant platform to construct various heterostructures of two-dimensional materials. However, the surface and interface cleanliness are essential to realize high electronical performance of heterostructures devices. Here, we demonstrated thermal annealing effect on the mobility and electrical transport properties of graphene on hexagonal boron nitride heterostructures devices. With different annealing temperature recipes for graphene on hexagonal boron nitride devices, we found annealing temperature at 300 °C can clean resist residual and achieve high mobility. Atomic force microscopy results also present a clean surface and small average root mean square roughness as low as 210 pm. Well defined oscillations and plateaus of electrical transport at low magnetic field indicate a high-quality graphene surface.

Facile deterministic cutting of 2D materials for twistronics using a tapered fibre scalpel

We present a quick and reliable method to cut 2D materials for creating 2D twisted heterostructures and devices. We demonstrate the effectiveness of using a tapered fibre scalpel for cutting graphene. Electrical transport measurements show evidence of the desired twist between the graphene layers fabricated using our technique. Statistics of the number of successfully twisted stacks made using our method is compared with h-BN assisted tear-and-stack method. Also, our method can be used for twisted stack fabrication of materials that are few nanometers thick. Finally, we demonstrate the versatility of the tapered fibre scalpel for other shaping related applications for sensitive 2D materials.

Large magnetoelectric coupling in multiferroic oxide heterostructures assembled via epitaxial lift-off

Epitaxial films may be released from growth substrates and transferred to structurally and chemically incompatible substrates, but epitaxial films of transition metal perovskite oxides have not been transferred to electroactive substrates for voltage control of their myriad functional properties. Here we demonstrate good strain transmission at the incoherent interface between a strain-released film of epitaxially grown ferromagnetic La_0.7Sr_0.3MnO₃ and an electroactive substrate of ferroelectric 0.68Pb(Mg_1/3Nb_2/3)O₃-0.32PbTiO₃ in a different crystallographic orientation. Our strain-mediated magnetoelectric coupling compares well with respect to epitaxial heterostructures, where the epitaxy responsible for strong coupling can degrade film magnetization via strain and dislocations. Moreover, the electrical switching of magnetic anisotropy is repeatable and non-volatile. High-resolution magnetic vector maps reveal that micromagnetic behaviour is governed by electrically controlled strain and cracks in the film. Our demonstration should inspire others to control the physical/chemical properties in strain-released epitaxial oxide films by using electroactive substrates to impart strain via non-epitaxial interfaces.

Key properties of transition metal perovskite oxides are degraded after epitaxial growth on ferroelectric substrates due to lattice-mismatch strain. Here, the authors use epitaxial lift-off and transfer to overcome this problem and demonstrate electric field control of a bulk-like magnetization.

Spatially controlled lateral heterostructures of graphene and transition metal dichalcogenides toward atomically thin and multi-functional electronics

Edge contacts between two-dimensional (2D) materials in the in-plane direction can achieve minimal contact area and low contact resistance, producing atomically thin devices with improved performance. Particularly, lateral heterojunctions of metallic graphene and semiconducting transition metal dichalcogenides (TMDs) exhibit small Schottky barrier heights due to graphene's low work-function. However, issues exist with the fabrication of highly transparent and flexible multi-functional devices utilizing lateral heterostructures (HSs) of graphene and TMDs via spatially controlled growth. This review demonstrates the growth and electronic applications of lateral HSs of graphene and TMDs, highlighting key technologies controlling the wafer-scale growth of continuous films for practical applications. It deepens the understanding of the spatially controlled growth of lateral HSs using chemical vapor deposition methods, and also contributes to the applications that depend on the scale-up of all-2D electronics with ultra-high electrical performance.

One-Dimensional Edge Contacts to a Monolayer Semiconductor

Integration of electrical contacts into van der Waals (vdW) heterostructures is critical for realizing electronic and optoelectronic functionalities. However, to date no scalable methodology for gaining electrical access to buried monolayer two-dimensional (2D) semiconductors exists. Here we report viable edge contact formation to hexagonal boron nitride (hBN) encapsulated monolayer MoS₂. By combining reactive ion etching, in situ Ar⁺ sputtering and annealing, we achieve a relatively low edge contact resistance, high mobility (up to ∼30 cm² V^-1 s^-1) and high on-current density (>50 μA/μm at V_DS = 3V), comparable to top contacts. Furthermore, the atomically smooth hBN environment also preserves the intrinsic MoS₂ channel quality during fabrication, leading to a steep subthreshold swing of 116 mV/dec with a negligible hysteresis. Hence, edge contacts are highly promising for large-scale practical implementation of encapsulated heterostructure devices, especially those involving air sensitive materials, and can be arbitrarily narrow, which opens the door to further shrinkage of 2D device footprint.

Approaching the Intrinsic Limit in Transition Metal Diselenides via Point Defect Control

Two dimensional (2D) transition-metal dichalcogenide (TMD) based semiconductors have generated intense recent interest due to their novel optical and electronic properties and potential for applications. In this work, we characterize the atomic and electronic nature of intrinsic point defects found in single crystals of these materials synthesized by two different methods, chemical vapor transport and self-flux growth. Using a combination of scanning tunneling microscopy (STM) and scanning transmission electron microscopy (STEM), we show that the two major intrinsic defects in these materials are metal vacancies and chalcogen antisites. We show that by control of the synthetic conditions, we can reduce the defect concentration from above 10¹³/cm² to below 10¹¹/cm². Because these point defects act as centers for nonradiative recombination of excitons, this improvement in material quality leads to a hundred-fold increase in the radiative recombination efficiency.

Nonlayered Two-Dimensional Defective Semiconductor γ-Ga2S3 toward Broadband Photodetection

Two-dimensional (2D) materials exhibit high sensitivity to structural defects due to the nature of interface-type materials, and the corresponding structural defects can effectively modulate their inherent properties in turn, giving them a wide application range in high-performance and functional devices. 2D γ-Ga₂S₃ is a defective semiconductor with outstanding optoelectronic properties. However, its controllable preparation has not been implemented yet, which hinders exploring its potential applications. In this work, we introduce nonlayered γ-Ga₂S₃ into the 2D materials family, which was successfully synthesized via the space-confined chemical vapor deposition method. Its intriguing defective structure are revealed by high-resolution transmission electron microscopy and temperature-dependent cathodoluminescence spectra, which endow the γ-Ga₂S₃-based device with a broad photoresponse from the ultraviolet to near-infrared region and excellent photoelectric conversion capability. Simultaneously, the device also exhibits excellent ultraviolet detection ability ( R_λ = 61.3 A W^-1, I_on /I_off = 851, EQE = 2.17× 10⁴ %, D* = 1.52× 10¹⁰ Jones @350 nm), and relatively fast response (15 ms). This work provides a feasible way to fabricate ultrathin nonlayered materials and explore the potential applications of a 2D defective semiconductor in high-performance broadband photodetection, which also suggests a promising future of defect creation in optimizing photoelectric properties.

Gate-Tunable Graphene-WSe2 Heterojunctions at the Schottky-Mott Limit

Metal-semiconductor interfaces, known as Schottky junctions, have long been hindered by defects and impurities. Such imperfections dominate the electrical characteristics of the junction by pinning the metal Fermi energy. Here, a graphene-WSe₂ p-type Schottky junction, which exhibits a lack of Fermi level pinning, is studied. The Schottky junction displays near-ideal diode characteristics with large gate tunability and small leakage currents. Using a gate electrostatically coupled to the WSe₂ channel to tune the Schottky barrier height, the Schottky-Mott limit is probed in a single device. As a special manifestation of the tunable Schottky barrier, a diode with a dynamically controlled ideality factor is demonstrated.

Defect-Controlled Nucleation and Orientation of WSe2 on hBN: A Route to Single-Crystal Epitaxial Monolayers

A defect-controlled approach for the nucleation and epitaxial growth of WSe₂ on hBN is demonstrated. The WSe₂ domains exhibit a preferred orientation of over 95%, leading to a reduced density of inversion domain boundaries (IDBs) upon coalescence. First-principles calculations and experimental studies as a function of growth conditions and substrate pretreatment confirm that WSe₂ nucleation density and orientation are controlled by the hBN surface defect density rather than thermodynamic factors. Detailed transmission electron microscopy analysis provides support for the role of single-atom vacancies on the hBN surface that trap W atoms and break surface symmetry leading to a reduced formation energy for one orientation of WSe₂ domains. Through careful control of nucleation and extended lateral growth time, fully coalesced WSe₂ monolayer films on hBN were achieved. Low-temperature photoluminescence (PL) measurements and transport measurements of back-gated field-effect transistor devices fabricated on WSe₂/hBN films show improved optical and electrical properties compared to films grown on sapphire under similar conditions. Our results reveal an important nucleation mechanism for the epitaxial growth of van der Waals heterostructures and demonstrate hBN as a superior substrate for single-crystal transition-metal dichalcogenide (TMD) films, resulting in a reduced density of IDBs and improved properties. The results motivate further efforts focused on the development of single crystal hBN substrates and epilayers for synthesis of wafer-scale single crystal TMD films.

Recent Progress in the Fabrication, Properties, and Devices of Heterostructures Based on 2D Materials

With a large number of researches being conducted on two-dimensional (2D) materials, their unique properties in optics, electrics, mechanics, and magnetics have attracted increasing attention. Accordingly, the idea of combining distinct functional 2D materials into heterostructures naturally emerged that provides unprecedented platforms for exploring new physics that are not accessible in a single 2D material or 3D heterostructures. Along with the rapid development of controllable, scalable, and programmed synthesis techniques of high-quality 2D heterostructures, various heterostructure devices with extraordinary performance have been designed and fabricated, including tunneling transistors, photodetectors, and spintronic devices. In this review, we present a summary of the latest progresses in fabrications, properties, and applications of different types of 2D heterostructures, followed by the discussions on present challenges and perspectives of further investigations.

Recent progress in synthesis, properties, and applications of hexagonal boron nitride-based heterostructures

Featuring an absence of dangling bonds, large band gap, low dielectric constant, and excellent chemical inertness, atomically thin hexagonal boron nitride (h-BN) is considered an ideal candidate for integration with graphene and other 2D materials. During the past years, great efforts have been devoted to the research of h-BN-based heterostructures, from fundamental study to practical applications. In this review we summarize the recent progress in the synthesis, novel properties, and potential applications of h-BN-based heterostructures, especially the synthesis technique. Firstly, various approaches to the preparation of both in-plane and vertically stacked h-BN-based heterostructures are introduced in detail, including top-down strategies associated with exfoliation transfer processes and bottom-up strategies such as chemical vapor deposition (CVD)-based growth. Secondly, we discuss some novel properties arising in these heterostructures. Several promising applications in electronic and optoelectronic devices are also reviewed. Finally, we discuss the main challenges and possible research directions in this field.

Gigahertz Field-Effect Transistors with CMOS-Compatible Transfer-Free Graphene

High-quality graphene grown on metal-free substrates represents a vital milestone that provides an atomic clean interface and a complementary metal-oxide-semiconductor-compatible manufacturing process for electronic applications. We report a scalable approach to fabricate radio frequency field-effect transistors with a graphene channel grown directly on the sapphire substrate using the technique of remote-catalyzed chemical vapor deposition (CVD). A mushroom-shaped AlO _x top gate is used to allow the self-aligned drain/source contacts, yielding remarkable increase of device transconductance and reduction of the associated parasitic resistance. The quality of thus-grown graphene is reflected in the high extrinsic cutoff frequency and maximum oscillation frequency of 10.1 and 5.6 GHz for the graphene channel of length 200 nm and width 80 μm, respectively, potentially comparable with those of transferred CVD graphene at the same channel length and holding promise for applications in high-speed wireless communications.

Using van der Waals heterostructures based on two-dimensional blue phosphorus and XC (X = Ge, Si) for water-splitting photocatalysis: a first-principles study

BlueP/SiC and BlueP/GeC vdW heterostructures are high-efficiency photocatalysts for water-splitting at pH 0 and 7, respectively.

Interactions and Magnetotransport through Spin-Valley Coupled Landau Levels in Monolayer MoS_{2}

The strong spin-orbit coupling and the broken inversion symmetry in monolayer transition metal dichalcogenides results in spin-valley coupled band structures. Such a band structure leads to novel applications in the fields of electronics and optoelectronics. Density functional theory calculations as well as optical experiments have focused on spin-valley coupling in the valence band. Here we present magnetotransport experiments on high-quality n-type monolayer molybdenum disulphide (MoS_{2}) samples, displaying highly resolved Shubnikov-de Haas oscillations at magnetic fields as low as 2 T. We find the effective mass 0.7m_{e}, about twice as large as theoretically predicted and almost independent of magnetic field and carrier density. We further detect the occupation of the second spin-orbit split band at an energy of about 15 meV, i.e., about a factor of 5 larger than predicted. In addition, we demonstrate an intricate Landau level spectrum arising from a complex interplay between a density-dependent Zeeman splitting and spin- and valley-split Landau levels. These observations, enabled by the high electronic quality of our samples, testify to the importance of interaction effects in the conduction band of monolayer MoS_{2}.

Low temperature photoconductivity of few layer p-type tungsten diselenide (WSe2) field-effect transistors (FETs)

We report on the low-temperature photoconductive properties of few layer p-type tungsten diselenide (WSe₂) field-effect transistors (FETs) synthesized using the chemical vapor transport method. Photoconductivity measurements show that these FETs display room temperature photo-responsivities of ∼7 mAW^-1 when illuminated with a laser of wavelength λ = 658 nm with a power of 38 nW. The photo-responsivities of these FETs showed orders of magnitude improvement (up to ∼1.1 AW^-1 with external quantum efficiencies reaching as high as ∼188%) upon application of a gate voltage (V _G = -60 V). A temperature dependent (100 K < T < 300 K) photoconductivity study reveals a weak temperature dependence of responsivity for these WSe₂ phototransistors. We demonstrate that it is possible to obtain stable photo-responsivities of ∼0.76 ± 0.2 AW^-1 (with applied V _G = -60 V), at low temperatures in these FETs. These findings indicate the possibility of developing WSe₂-based FETs for highly robust, efficient, and swift photodetectors with a potential for optoelectronic applications over a broad range of temperatures.

Charge carrier injection and transport engineering in two-dimensional transition metal dichalcogenides

Ever since two dimensional-transition (2D) metal dichalcogenides (TMDs) were discovered, their fascinating electronic properties have attracted a great deal of attention for harnessing them as critical components in novel electronic devices. 2D-TMDs endowed with an atomically thin structure, dangling bond-free nature, electrostatic integrity, and tunable wide band gaps enable low power consumption, low leakage, ambipolar transport, high mobility, superconductivity, robustness against short channel effects and tunneling in highly scaled devices. However, the progress of 2D-TMDs has been hampered by severe charge transport issues arising from undesired phenomena occurring at the surfaces and interfaces. Therefore, this review provides three distinct engineering strategies embodied with distinct innovative approaches to optimize both carrier injection and transport. First, contact engineering involves 2D-metal contacts and tunneling interlayers to overcome metal-induced interface states and the Fermi level pinning effect caused by low vacancy energy formation. Second, dielectric engineering covers high-k dielectrics, ionic liquids or 2D-insulators to screen scattering centers caused by carrier traps, imperfections and rough substrates, to finely tune the Fermi level across the band gap, and to provide dangling bond-free media. Third, material engineering focuses on charge transfer via substitutional, chemical and plasma doping to precisely modulate the carrier concentration and to passivate defects while preserving material integrity. Finally, we provide an outlook of the conceptual and technical achievements in 2D-TMDs to give a prospective view of the future development of highly scaled nanoelectronic devices.

Atmospheric and Long-term Aging Effects on the Electrical Properties of Variable Thickness WSe2 Transistors

Atmospheric and long-term aging effects on electrical properties of WSe₂ transistors with various thicknesses are examined. Although countless published studies report electrical properties of transition-metal dichalcogenide materials, many are not attentive to testing environment or to age of samples, which we have found significantly impacts results. Our as-fabricated exfoliated WSe₂ pristine devices are predominantly n-type, which is attributed to selenium vacancies. Transfer characteristics of as-fabricated devices measured in air then vacuum reveal physisorbed atmospheric molecules significantly reduced n-type conduction in air. First-principles calculations suggest this short-term reversible atmospheric effect can be attributed primarily to physisorbed H₂O on pristine WSe₂, which is easily removed from the pristine surface in vacuum due to the low adsorption energy. Devices aged in air for over 300 h demonstrate irreversibly increased p-type conduction and decreased n-type conduction. Additionally, they develop an extended time constant for recovery of the atmospheric adsorbents effect. Short-term atmospheric aging (up to approximately 900 h) is attributed to O₂ and H₂O molecules physisorbed to selenium vacancies where electron transfer from the bulk and adsorbed binding energies are higher than the H₂O-pristine WSe₂. The residual/permanent aging component is attributed to electron trapping molecular O₂ and isoelectronic O chemisorption at selenium vacancies, which also passivates the near-conduction band gap state, p-doping the material, with very high binding energy. All effects demonstrated have the expected thickness dependence, namely, thinner devices are more sensitive to atmospheric and long-term aging effects.

Impact of a van der Waals interface on intrinsic and extrinsic defects in an MoSe2 monolayer

In this work, we study growth and migration of atomic defects in MoSe₂ on graphene using multiple advanced transmission electron microscopy techniques to explore defect behavior in vdW heterostructures. A MoSe₂/graphene vdW heterostructure is prepared by a direct growth of both monolayers, thereby attaining an ideal vdW interface between the monolayers. We investigate the intrinsic defects (inversion domains and grain boundaries) in synthesized MoSe₂, their evolution amid growth processing steps, and their influence on the formation and movement of extrinsic defects. Electron diffraction identifies a preferential interlayer orientation of 2° between MoSe₂ and graphene, which is caused by the presence of intrinsic IBD defects. Extrinsic defects (point and line defects) are generated by in situ electron irradiation in the MoSe₂ layer. Our results shed light on how to independently modify the MoSe₂ atomic structure in vdW heterostructures for potential utilization in device processing.

The ambipolar evolution of a high-performance WSe2 transistor assisted by a ferroelectric polymer

In recent years, the electrical characteristics of WSe2 field-effect transistors (FETs) have been widely investigated with various dielectrics. Among them, being able to perfectly tune the polarity of WSe2 is meaningful and promising work. In this work, we systematically study the electrical properties of bilayer WSe2 FETs modulated by ferroelectric polymer poly(vinylidenefluoride-co-trifluoroethylene) (P(VDF-TrFE)). Compared to traditional gate dielectric SiO2, the P(VDF-TrFE) can not only tune both electron and hole concentrations to the same high level, but also improve the hole mobility of bilayer WSe2 to 265.96 cm2 V-1 s-1 under SiO2 gating. Its drain current on/off ratio is also improved to 2 × 105 for p-type and 4 × 105 for n-type driven by P(VDF-TrFE). More importantly, the ambipolar behaviors of bilayer WSe2 are effectively achieved and maintained because of the remnant polarization field of P(VDF-TrFE). This work indicates that WSe2 FETs with P(VDF-TrFE) gating have huge potential for complementary logic transistor applications, and paves an effective way to achieve in-plane p-n junctions.

Field-Effect Transistors Based on van-der-Waals-Grown and Dry-Transferred All-Inorganic Perovskite Ultrathin Platelets

Nowadays, the research on perovskite transistors is still in its infancy, despite the fact that perovskite-based solar cells and light-emitting diodes have been widely investigated. Two major hurdles exist before obtaining reliable perovskite-based transistors: the processing difficulty for their sensitivity to polar solvents and unsatisfactory perovskite quality on the transistor platform. Here, for the first time, we report on high-performance all-inorganic perovskite FETs profiting from both van der Waals epitaxial boundary-free ultrathin single crystals and completely dry-processed transfer technique without chemical contaminant. These two crucial factors ensure the unprecedented high-quality perovskite channels. The achieved FET hole mobility and on-off ratio reach 0.32 cm² V^-1 s^-1 and 6.7 × 10³, respectively. Moreover, at the low temperature, the mobility and on-off ratio can be enhanced to be 1.04 cm² V^-1 s^-1 and 1.3 × 10⁴. This work could open the door for the FET applications based on perovskite single crystals.

Gate-Defined One-Dimensional Channel and Broken Symmetry States in MoS2 van der Waals Heterostructures

We have realized encapsulated trilayer MoS₂ devices with gated graphene contacts. In the bulk, we observe an electron mobility as high as 7000 cm²/(V s) at a density of 3 × 10¹² cm^-2 at a temperature of 1.9 K. Shubnikov-de Haas oscillations start at magnetic fields as low as 0.9 T. The observed 3-fold Landau level degeneracy can be understood based on the valley Zeeman effect. Negatively biased split gate electrodes allow us to form a channel that can be completely pinched off for sufficiently large gate voltages. The measured conductance displays plateau-like features.

Topography preserved microwave plasma etching for top-down layer engineering in MoS2 and other van der Waals materials

A generic and universal layer engineering strategy for van der Waals (vW) materials, scalable and compatible with the current semiconductor technology, is of paramount importance in realizing all-two-dimensional logic circuits and to move beyond the silicon scaling limit. In this letter, we demonstrate a scalable and highly controllable microwave plasma based layer engineering strategy for MoS₂ and other vW materials. Using this technique we etch MoS₂ flakes layer-by-layer starting from an arbitrary thickness and area down to the mono- or the few-layer limit. From Raman spectroscopy, atomic force microscopy, photoluminescence spectroscopy, scanning electron microscopy and transmission electron microscopy, we confirm that the structural and morphological properties of the material have not been compromised. The process preserves the pre-etch layer topography and yields a smooth and pristine-like surface. We explore the electrical properties utilising a field effect transistor geometry and find that the mobility values of our samples are comparable to those of the pristine ones. The layer removal does not involve any reactive gasses or chemical reactions and relies on breaking the weak inter-layer vW interaction making it a generic technique for a wide spectrum of layered materials and heterostructures. We demonstrate the wide applicability of the technique by extending it to other systems such as graphene, h-BN and WSe₂. In addition, using microwave plasma in combination with standard lithography, we illustrate a lateral patterning scheme making this process a potential candidate for large scale device fabrication in addition to layer engineering.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocatalysis, batteries, supercapacitors, solar cells, photocatalysis, and sensing platforms. Finally, the challenges and outlooks in this promising field are featured on the basis of its current development.

Hexagonal Boron Nitride/Au Substrate for Manipulating Surface Plasmon and Enhancing Capability of Surface-Enhanced Raman Spectroscopy

We report on an insulating two-dimensional material, hexagonal boron nitride (h-BN), which can be used as an effective wrapping layer for surface-enhanced Raman spectroscopy (SERS) substrates. This material exhibits outstanding characteristics such as its crystallinity, impermeability, and thermal conductance. Improved SERS sensitivity is confirmed for Au substrates wrapped with h-BN, the mechanism of which is investigated via h-BN thickness-dependent experiments combined with theoretical simulations. The investigations reveal that a stronger electromagnetic field can be generated at the narrowed gap of the h-BN surface, which results in higher Raman sensitivity. Moreover, the h-BN-wrapped Au substrate shows extraordinary stability against photothermal and oxidative damages. We also describe its capability to detect specific chemicals that are difficult to analyze using conventional SERS substrates. We believe that this concept of using an h-BN insulating layer to protect metallic or plasmonic materials will be widely used not only in the field of SERS but also in the broader study of plasmonic and optoelectronic devices.

A High-Performance WSe2 /h-BN Photodetector using a Triphenylphosphine (PPh3 )-Based n-Doping Technique

The effects of triphenylphosphine (PPh3 )-based n-doping and hexagonal boron nitride (h-BN) insertion on a tungsten diselenide (WSe2 ) photodetector are systematically studied, and a very high performance WSe2 /h-BN heterostucture-based photodetector is demonstrated with a record photoresponsivity (1.27 × 10(6) A W(-1) ) and temporal photoresponse (rise time: 2.8 ms, decay time: 20.8 ms) under 520 nm wavelength and 5 pW power laser illumination.

Patterning Superatom Dopants on Transition Metal Dichalcogenides

This study describes a new and simple approach to dope two-dimensional transition metal dichalcogenides (TMDCs) using the superatom Co6Se8(PEt3)6 as the electron dopant. Semiconducting TMDCs are wired into field-effect transistor devices and then immersed into a solution of these superatoms. The degree of doping is determined by the concentration of the superatoms in solution and by the length of time the films are immersed in the dopant solution. Using this chemical approach, we are able to turn mono- and few-layer MoS2 samples from moderately to heavily electron-doped states. The same approach applied on WSe2 films changes their characteristics from hole transporting to electron transporting. Moreover, we show that the superatom doping can be patterned on specific areas of TMDC films. To illustrate the power of this technique, we demonstrate the fabrication of a lateral p-n junction by selectively doping only a portion of the channel in a WSe2 device. Finally, encapsulation of the doped films with crystalline hydrocarbon layers stabilizes their properties in an ambient environment.

Percolative switching in transition metal dichalcogenide field-effect transistors at room temperature

We have addressed the microscopic transport mechanism at the switching or 'on-off' transition in transition metal dichalcogenide (TMDC) field-effect transistors (FETs), which has been a controversial topic in TMDC electronics, especially at room temperature. With simultaneous measurement of channel conductivity and its slow time-dependent fluctuation (or noise) in ultrathin WSe2 and MoS2 FETs on insulating SiO2 substrates where noise arises from McWhorter-type carrier number fluctuations, we establish that the switching in conventional backgated TMDC FETs is a classical percolation transition in a medium of inhomogeneous carrier density distribution. From the experimentally observed exponents in the scaling of noise magnitude with conductivity, we observe unambiguous signatures of percolation in a random resistor network, particularly, in WSe2 FETs close to switching, which crosses over to continuum percolation at a higher doping level. We demonstrate a powerful experimental probe to the microscopic nature of near-threshold electrical transport in TMDC FETs, irrespective of the material detail, device geometry, or carrier mobility, which can be extended to other classes of 2D material-based devices as well.

van der Waals Heterojunction Devices Based on Organohalide Perovskites and Two-Dimensional Materials

The recently emerged organohalide perovskites (e.g., CH3NH3PbI3) have drawn intense attention for high efficiency solar cells. However, with a considerable solubility in many solvents, these perovskites are not typically compatible with conventional lithography processes for more complicated device fabrications that are important for both fundamental studies and technological applications. Here, we report the creation of novel heterojunction devices based on perovskites and two-dimensional (2D) crystals by taking advantage of the layered characteristic of lead iodide (PbI2) and vapor-phase intercalation. We show that a graphene/perovskite/graphene vertical stack can deliver a highest photoresponsivity of ∼950 A/W and photoconductive gain of ∼2200, and a graphene/WSe2/perovskite/graphene heterojunction can display a high on/off ratio (∼10(6)) transistor behavior with distinct gate-tunable diode characteristics and open-circuit voltages. Such unique perovskite-2D heterostructures have significant potential for future optoelectronic research and can enable broad possibilities with compositional tunability of organohalide perovskites and the versatility offered by diverse 2D materials.

Charge transport and mobility engineering in two-dimensional transition metal chalcogenide semiconductors

This review presents recent progress on charge transport properties, carrier scattering mechanisms, and carrier mobility engineering of two-dimensional transition metal chalcogenides.

High-Mobility Holes in Dual-Gated WSe2 Field-Effect Transistors

We demonstrate dual-gated p-type field-effect transistors (FETs) based on few-layer tungsten diselenide (WSe2) using high work-function platinum source/drain contacts and a hexagonal boron nitride top-gate dielectric. A device topology with contacts underneath the WSe2 results in p-FETs with ION/IOFF ratios exceeding 10(7) and contacts that remain ohmic down to cryogenic temperatures. The output characteristics show current saturation and gate tunable negative differential resistance. The devices show intrinsic hole mobilities around 140 cm(2)/(V s) at room temperature and approaching 4000 cm(2)/(V s) at 2 K. Temperature-dependent transport measurements show a metal-insulator transition, with an insulating phase at low densities and a metallic phase at high densities. The mobility shows a strong temperature dependence consistent with phonon scattering, and saturates at low temperatures, possibly limited by Coulomb scattering or defects.

In situ degradation studies of two-dimensional WSe₂-graphene heterostructures

Heterostructures of two-dimensional materials can be vulnerable to thermal degradation due to structural and interfacial defects as well as thermal expansion mismatch, yet a systematic study does not exist in the literature. In this study, we investigate the degradation of freestanding WSe2-graphene heterostructures due to heat and charge flow by performing in situ experiments inside a transmission electron microscope. Experimental results show that purely thermal loading requires higher temperatures (>850 °C), about 150 °C higher than that under combined electrical and thermal loading. In both cases, selenium is the first element to decompose and migration of silicon atoms from the test structure to the freestanding specimen initiates rapid degradation through the formation of tungsten disilicide and silicon carbide. The role of the current flow is to enhance the migration of silicon from the sample holder and to knock-out the selenium atoms. The findings of this study provide fundamental insights into the degradation of WSe2-graphene heterostructures and inspire their application in electronics for use in harsh environments.

High Photoresponsivity and Short Photoresponse Times in Few-Layered WSe2 Transistors

Here, we report the photoconducting response of field-effect transistors based on three atomic layers of chemical vapor transport grown WSe2 crystals mechanically exfoliated onto SiO2. We find that trilayered WSe2 field-effect transistors, built with the simplest possible architecture, can display high hole mobilities ranging from 350 cm(2)/(V s) at room temperature (saturating at a value of ∼500 cm(2)/(V s) below 50 K) displaying a strong photocurrent response, which leads to exceptionally high photoresponsivities up to 7 A/W under white light illumination of the entire channel for power densities p < 10(2) W/m(2). Under a fixed wavelength of λ = 532 nm and a laser spot size smaller than the conducting channel area, we extract photoresponsitivities approaching 100 mA/W with concomitantly high external quantum efficiencies up to ∼40% at room temperature. These values surpass values recently reported from more complex architectures, such as graphene and transition metal dichalcogenides based heterostructures. Also, trilayered WSe2 phototransistors display photoresponse times on the order of 10 μs. Our results indicate that the addition of a few atomic layers considerably decreases the photoresponse times, probably by minimizing the interaction with the substrates, while maintaining a very high photoresponsivity.