Enhancing the magnetoviscosity of ferrofluids by the addition of biological nanotubes

Theoretical and Experimental Study on the Preparation of High-Viscosity Magnetic Nanofluid by Combined Surfactants

In this study, the mechanism by which combined surfactants affect the dispersion stability of magnetic nanofluids (MNFs) was improved. Two stable lubricating oil-based magnetic nanofluids with high viscosity and one with low viscosity were prepared by chemical coprecipitation. Erucic acid and octanoic acid were used as the combined surfactants to modify the Fe3O4 nanoparticles (MNPs). The size and morphology of the particles were observed using TEM. The rheological properties were tested with a rotational rheometer. The magnetization of the lubricating oil-based magnetic nanofluids was characterized by VSM. The results indicated that the prepared magnetic nanofluids had high viscosity, high magnetism, and good stability. This study provided ideas for the preparation of a high-viscosity magnetic nanofluid. By using combined surfactants, sufficient steric repulsion energy can be provided to counteract the attraction energy of sterically protected nanoparticles, thus achieving a balance of the dispersion stability of MNF.

Getting Hold of the Tobamovirus Particle-Why and How? Purification Routes over Time and a New Customizable Approach

This article develops a multi-perspective view on motivations and methods for tobamovirus purification through the ages and presents a novel, efficient, easy-to-use approach that can be well-adapted to different species of native and functionalized virions. We survey the various driving forces prompting researchers to enrich tobamoviruses, from the search for the causative agents of mosaic diseases in plants to their increasing recognition as versatile nanocarriers in biomedical and engineering applications. The best practices and rarely applied options for the serial processing steps required for successful isolation of tobamoviruses are then reviewed. Adaptations for distinct particle species, pitfalls, and 'forgotten' or underrepresented technologies are considered as well. The article is topped off with our own development of a method for virion preparation, rooted in historical protocols. It combines selective re-solubilization of polyethylene glycol (PEG) virion raw precipitates with density step gradient centrifugation in biocompatible iodixanol formulations, yielding ready-to-use particle suspensions. This newly established protocol and some considerations for perhaps worthwhile further developments could serve as putative stepping stones towards preparation procedures appropriate for routine practical uses of these multivalent soft-matter nanorods.

Designer-length palladium nanowires can be templated by the central channel of tobacco mosaic virus nanorods

We have developed methods for the templated synthesis of palladium nanowires (Pd NWs) within the central channel of tobacco mosaic virus (TMV) nanorods of various lengths. We show that uniform 4 nm diameter Pd NWs can be produced by selective growth within these channels by including the capping reagent, poly(vinyl-pyrrolidone) (PVP30K) and reducing the metal precursor to metallic palladium with ascorbic acid. The length of the Pd NWs can be controlled either by varying the length of the nanorod templates and/or through alterations to the reaction conditions. We have also demonstrated bimetallic gold (Au)-palladium (Pd) in-situ metallization of TMV nanorods resulting in the production of Pd NWs 6 nm gold nanoparticles attached to their ends. The materials produced have many potential applications in the construction of nanoscale devices.

Thermal and rheological properties of magnetic nanofluids: Recent advances and future directions

Technological advancement and miniaturization of electronic gadgets fueled intense research on nanofluids as potential candidates for cooling applications as a substitute to conventional heat transfer fluids. Among nanofluids, magnetic nanofluids, traditionally known as ferrofluids have attracted a lot of attention owing to their magnetic field tunable thermal conductivity and rheological properties due to the aggregation of the magnetic nanoparticles into chains or columns in the presence of the magnetic field. The field-induced aggregates act as low resistance pathways thereby improving thermal transport substantially. Recent studies show that ferrofluids with smaller size and narrow size distribution display significant enhancement in thermal conductivity in the presence of a magnetic field with negligible viscosity enhancement, which is ideal for effective thermal management of electronic devices, especially in miniature electronic devices. On the contrary, highly polydisperse ferrofluids containing large aggregates, show modest enhancement in thermal conductivity in the presence of a magnetic field and a huge enhancement in viscosity. The most recent studies show that magnetic field ramp rate has a profound effect on aggregation kinetics and thermal and rheological properties. The viscosity enhancement under an external stimulus impedes their practical use in electronics cooling, which warrants the need to attain a high thermal conductivity to viscosity ratio, under a modest magnetic field. Though there are several reviews on heat transfer in nanofluids and hybrid nanofluids, a comprehensive review on fundamental understanding of field-induced thermal and rheological properties in magnetic fluids is missing in the literature. This review provides a pedagogical description of the fundamental understanding of field-induced thermal and rheological properties in magnetic fluids, with the necessary background, key concepts, definitions, mechanisms, theoretical models, experimental protocols, and design of experiments. Many important case studies are presented along with the experimental design aspects. The review also provides a summary of important experimental studies with key findings, along with the key challenges and future research directions. The review is an ideal material for experimentalists and theoreticians practicing in the field of magnetic fluids, and also serves as an excellent reference for freshers who indent to begin research on this topic.

Enzymatic activity of individual bioelectrocatalytic viral nanoparticles: dependence of catalysis on the viral scaffold and its length

The enzymatic activity of tobacco mosaic virus (TMV) nanorod particles decorated with an integrated electro-catalytic system, comprising the quinoprotein glucose-dehydrogenase (PQQ-GDH) enzyme and ferrocenylated PEG chains as redox mediators, is probed at the individual virion scale by atomic force microscopy-scanning electrochemical atomic force microscopy (AFM-SECM). A marked dependence of the catalytic activity on the particle length is observed. This finding can be explained by electron propagation along the viral backbone, resulting from electron exchange between ferrocene moieties, coupled with enzymatic catalysis. Thus, the use of a simple 1D diffusion/reaction model allows the determination of the kinetic parameters of the virus-supported enzyme. Comparative analysis of the catalytic behavior of the Fc-PEG/PQQ-GDH system assembled on two differing viral scaffolds, TMV (this work) and bacteriophage-fd (previous work), reveals two distinct kinetic effects of scaffolding: An enhancement of catalysis that does not depend on the virus type and a modulation of substrate inhibition that depends on the virus type. AFM-SECM detection of the enzymatic activity of a few tens of PQQ-GDH molecules, decorating a 40 nm-long viral domain, is also demonstrated, a record in terms of the lowest number of enzyme molecules interrogated by an electrochemical imaging technique.

Tuning the magneto-rheological properties of magnetic fluid using hydrophilic fumed silica nanoparticles

In this work, we study the effect of hydrophilic fumed silica nanoparticles with different mass fractions on the magneto-rheological properties of magnetic fluid, and reveal the mechanism by the coarse-grained molecular dynamics simulation. The magneto-rheological experimental results show that the viscosity of the magnetic fluid with silica nanoparticles will first decrease and then increase (larger than that of the pure magnetic fluid) as the mass fraction of silica nanoparticles increases. We use the molecular dynamics calculations to further explain the influence mechanism of the silica nanoparticles on the magneto-rheological properties of the magnetic fluid. We find that non-magnetic particles will hinder the formation of chains of magnetic particles and shorten the length of the chains under magnetic fields. Our research shows that the magneto-rheological properties of magnetic fluid can be optimized with appropriate hydrophilic fumed silica nanoparticles, which is of great significance in the fields of dynamic seals and microfluidics.

Interfacially Bridging Covalent Network Yields Hyperstable and Ultralong Virus-Based Fibers for Engineering Functional Materials

We present a strategy of interfacially bridging covalent network within tobacco mosaic virus (TMV) virus-like particles (VLPs). We arranged T103C cysteine to laterally conjugate adjacent subunits. In the axis direction, we set A74C mutation and systematically investigated candidate from E50C to P54C as the other thiol function site, for forming longitudinal disulfide bond chains. Significantly, the T103C-TMV-E50C-A74C shows the highest robustness in assembly capability and structural stability with the largest length, for TMV VLP to date. The fibers with lengths from several to a dozen of micrometers even survive under pH 13. The robust nature of this TMV VLP allows for reducer-free synthesis of excellent electrocatalysts for application in harshly alkaline hydrogen evolution.

High-resolution analyses of the mineralisation process at bio/inorganic interfaces

To gain insight into bio-inspired mineralisation processes that may be directed or influenced by the protein coat of tobacco mosaic virus (TMV), microscopic studies are crucial. The authors elucidate key steps towards the understanding of the mineralisation mechanism by high-resolution transmission electron microscopy imaging of the organic/inorganic interfaces. Wild-type TMV and mutants with distinct surface properties are used to investigate the processes of nucleation and mineral formation based on ZnO and ZnS deposition. The development of suitable sample preparation methods is central in the study, as well as finding the optimal imaging conditions in combination with the use of a latest-generation high-end microscope. The mineralisation is to be analysed with respect to the underlying nucleation process: Correlation of structure findings with mechanical properties will pave the way to the goal of the design of materials with enhanced mechanical properties.

From stars to stripes: RNA-directed shaping of plant viral protein templates-structural synthetic virology for smart biohybrid nanostructures

The self-assembly of viral building blocks bears exciting prospects for fabricating new types of bionanoparticles with multivalent protein shells. These enable a spatially controlled immobilization of functionalities at highest surface densities-an increasing demand worldwide for applications from vaccination to tissue engineering, biocatalysis, and sensing. Certain plant viruses hold particular promise because they are sustainably available, biodegradable, nonpathogenic for mammals, and amenable to in vitro self-organization of virus-like particles. This offers great opportunities for their redesign into novel "green" carrier systems by spatial and structural synthetic biology approaches, as worked out here for the robust nanotubular tobacco mosaic virus (TMV) as prime example. Natural TMV of 300 x 18 nm is built from more than 2,100 identical coat proteins (CPs) helically arranged around a 6,395 nucleotides ssRNA. In vitro, TMV-like particles (TLPs) may self-assemble also from modified CPs and RNAs if the latter contain an Origin of Assembly structure, which initiates a bidirectional encapsidation. By way of tailored RNA, the process can be reprogrammed to yield uncommon shapes such as branched nanoobjects. The nonsymmetric mechanism also proceeds on 3'-terminally immobilized RNA and can integrate distinct CP types in blends or serially. Other emerging plant virus-deduced systems include the usually isometric cowpea chlorotic mottle virus (CCMV) with further strikingly altered structures up to "cherrybombs" with protruding nucleic acids. Cartoon strips and pictorial descriptions of major RNA-based strategies induct the reader into a rare field of nanoconstruction that can give rise to utile soft-matter architectures for complex tasks. This article is categorized under: Biology-Inspired Nanomaterials > Protein and Virus-Based Structures Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Biology-Inspired Nanomaterials > Nucleic Acid-Based Structures.

Precise Assembly of Genetically Functionalized Magnetosomes and Tobacco Mosaic Virus Particles Generates a Magnetic Biocomposite

Magnetosomes represent magnetic nanoparticles with unprecedented characteristics. Both their crystal morphology and the composition of the enveloping membrane can be manipulated by genetic means, allowing the display of functional moieties on the particle surface. In this study, we explore the generation of a new biomaterial assembly by coupling magnetosomes with tobacco mosaic virus (TMV) particles, both functionalized with complementary recognition sites. TMV consists of single-stranded RNA encapsidated by more than 2100 coat proteins, which enable chemical modification via functional groups. Incubation of EmGFP- or biotin-decorated TMV particles with magnetosomes genetically functionalized with GFP-binding nanobodies or streptavidin, respectively, results in the formation of magnetic, mesoscopic, strand-like biocomposites. TMV facilitates the agglomeration of magnetosomes by providing a scaffold. The size of the TMV-magnetosome mesostrands can be adjusted by varying the TMV-magnetosome particle ratios. The versatility of this novel material combination is furthermore demonstrated by coupling magnetosomes and terminal, 5'-functionalized TMV particles with high molecular precision, which results in "drumstick"-like TMV-magnetosome complexes. In summary, our approaches provide promising strategies for the generation of new biomaterial assemblies that could be used as scaffold for the introduction of further functionalities, and we foresee a broad application potential in the biomedical and biotechnological field.

TMV Particles: The Journey From Fundamental Studies to Bionanotechnology Applications

Ever since its initial characterization in the 19th century, tobacco mosaic virus (TMV) has played a prominent role in the development of modern virology and molecular biology. In particular, research on the three-dimensional structure of the virus particles and the mechanism by which these assemble from their constituent protein and RNA components has made TMV a paradigm for our current view of the morphogenesis of self-assembling structures, including viral particles. More recently, this knowledge has been applied to the development of novel reagents and structures for applications in biomedicine and bionanotechnology. In this article, we review how fundamental science has led to TMV being at the vanguard of these new technologies.

Covalent incorporation of tobacco mosaic virus increases the stiffness of poly(ethylene glycol) diacrylate hydrogels

Hydrogels are versatile materials, finding applications as adsorbers, supports for biosensors and biocatalysts or as scaffolds for tissue engineering. A frequently used building block for chemically cross-linked hydrogels is poly(ethylene glycol) diacrylate (PEG-DA). However, after curing, PEG-DA hydrogels cannot be functionalized easily. In this contribution, the stiff, rod-like tobacco mosaic virus (TMV) is investigated as a functional additive to PEG-DA hydrogels. TMV consists of more than 2000 identical coat proteins and can therefore present more than 2000 functional sites per TMV available for coupling, and thus has been used as a template or building block for nano-scaled hybrid materials for many years. Here, PEG-DA (M n = 700 g mol-1) hydrogels are combined with a thiol-group presenting TMV mutant (TMVCys). By covalent coupling of TMVCys into the hydrogel matrix via the thiol-Michael reaction, the storage modulus of the hydrogels is increased compared to pure PEG-DA hydrogels and to hydrogels containing wildtype TMV (wt-TMV) which is not coupled covalently into the hydrogel matrix. In contrast, the swelling behaviour of the hydrogels is not altered by TMVCys or wt-TMV. Transmission electron microscopy reveals that the TMV particles are well dispersed in the hydrogels without any large aggregates. These findings give rise to the conclusion that well-defined hydrogels were obtained which offer the possibility to use the incorporated TMV as multivalent carrier templates e.g. for enzymes in future studies.

Bottom-Up Assembly of TMV-Based Nucleoprotein Architectures on Solid Supports

RNA-guided self-assembly of tobacco mosaic virus (TMV)-like nucleoprotein nanotubes is possible using 3'-terminally surface-linked scaffold RNAs containing the viral origin of assembly (OAS). In combination with TMV coat protein (CP) preparations, these scaffold RNAs can direct the growth of selectively addressable multivalent carrier particles directly at sites of interest on demand. Serving as adapter templates for the installation of functional molecules, they may promote an integration of active units into miniaturized technical devices, or enable their presentation on soft-matter nanotube systems at high surface densities advantageous for, for example, biodetection or purification applications. This chapter describes all procedures essential for the bottom-up fabrication of "nanostar" colloids with gold cores and multiple TMV-like arms, immobilized in a programmable manner by way of hybridization of the RNA scaffolds to oligodeoxynucleotides exposed on the gold beads.

Bioinspired Silica Mineralization on Viral Templates

Plant virus capsids are attractive entities for nanotechnological applications because of their variation in shape and natural assembly ability. This chapter describes the production and modification of three differently shaped plant virus capsids for silica mineralization purposes. The chosen plant viruses exhibit either an icosahedral (cowpea mosaic virus, CPMV), or a flexuous rod-like structure (potato virus X, PVX), or a rigid rod-like shape (tobacco mosaic virus, TMV), and are well-known and frequently used plant viruses for biotechnological applications. We describe the production (including genetic or chemical modification) and purification of the plant viruses or of empty virus-like particles in the case of CPMV, as well as the characterization of these harvested templates. The mineralization procedures and differences in the protocols specific to the distinct viruses are described, and the analyses of the mineralization results are explained.

Nanowires and Nanoparticle Chains Inside Tubular Viral Templates

One-dimensional (1D) inorganic nanomaterials, especially with magnetic and optical properties, are key components in material synthesis for applications in nanoelectronics, catalysis, and sensing. To achieve these objectives, tubular viral templates are emerging as natural anisotropic bioreactors for the control of the synthesis of inorganic materials with spatial confinement. In particular, tobacco mosaic virus (TMV) with a longitudinal cylinder shape provides a defined narrow cavity to direct the controllable synthesis of 1D inorganic nanomaterial. Based on the understanding of biological characteristics of viral capsids, we can introduce genetic modifications to tailor the arrangement of functional motifs for specific electroless deposition. Here we present an overview of methods for the utilization of the TMV-derived interior surface to realize spatially selective chemisorption, nucleation, and growth of nanocrystals into nanowires and nanoparticle chains.

Dual Functionalization of Rod-Shaped Viruses on Single Coat Protein Subunits

Plant viruses are emerging as versatile tools for nanotechnology applications since it is possible to modify their multivalent protein surfaces and thereby introduce and display new functionalities. In this chapter, we describe a tobacco mosaic virus (TMV) variant that exposes two selectively addressable amino acid moieties on each of its 2130 coat protein (CP) subunits. A lysine as well as a cysteine introduced at accessible sites of every CP can be modified with amino- and/or thiol-reactive chemistry such as N-hydroxysuccinimide esters (NHS ester) and maleimide containing reagents alone or simultaneously. This enables the pairwise immobilization of distinct molecules in close vicinity to each other on the TMV surface by simple standard conjugation protocols. We describe the generation of the mutations, the virus propagation and isolation as well as the dual functionalization of the TMV variant with two fluorescent dyes. The labeling is evaluated by SDS-PAGE and spectrophotometry and the degree of labeling (DOL) calculated.

RNA-Directed Assembly of Tobacco Mosaic Virus (TMV)-Like Carriers with Tunable Fractions of Differently Addressable Coat Proteins

Taking advantage of the ability for in vitro assembly of the plant-infecting virus tobacco mosaic virus (TMV), rod-shaped nanoscale scaffolds presenting different addressable groups can be obtained. We have established procedures resulting in virus-like particles with randomly distributed functional groups, with different groups arranged in striped but randomized structures, and even with distinct groups clustered in adjacent, better-defined domains. The TMV coat protein (CP) variants combined in these approaches can either originate all from TMV mutants propagated in planta, or be mixed with CP expressed in E. coli (CPEc). Protocols for expression and purification of a CPEc-His6 mutant in E. coli as well as the different methods for in vitro assembly and the visualization by decoration of one CP type are explained in detail.

Helical plant viral nanoparticles-bioinspired synthesis of nanomaterials and nanostructures

Viral nanotechnology is revolutionizing the biomimetic and bioinspired synthesis of novel nanomaterials. Bottom-up nanofabrication by self-assembly of individual molecular components of elongated viral nanoparticles (VNPs) and virus-like particles (VLPs) has resulted in the production of superior materials and structures in the nano(bio)technological fields. Viral capsids are attractive materials, because of their symmetry, monodispersity, and polyvalency. Helical VNPs/VLPs are unique prefabricated nanoscaffolds with large surface area to volume ratios and high aspect ratios, and enable the construction of exquisite supramolecular nanostructures. This review discusses the genetic and chemical modifications of outer, inner, and interface surfaces of a viral protein cage that will almost certainly lead to the development of superior next-generation targeted drug delivery and imaging systems, biosensors, energy storage and optoelectronic devices, therapeutics, and catalysts.

Virus-directed formation of electrocatalytically active nanoparticle-based Co3O4 tubes

Spinel-type Co₃O₄ finds applications in a wide range of fields, including clean energy conversion, where nanostructured Co₃O₄ may provide a cost-efficient alternative to platinum- and iridium-based catalysts for electrocatalytic water-splitting. We here describe a novel strategy in which basic cobalt carbonate - a precursor to Co₃O₄ - is precipitated as sheet-like structures and microspheres covered with fine surface protrusions, via ammonium carbonate decomposition at room temperature. Importantly, these mild reaction conditions enable us to employ bio-inspired templating approaches to further control the mineral structure. Rod-like tobacco mosaic viruses (TMV) were used as biotemplates for mineral deposition, where we profit from the ability of Co(ii) ions to mediate the ordered assembly of the virus nanorods to create complex tubular superstructures of TMV/ basic cobalt carbonate. Calcination of these tubules is then achieved with retention of the gross morphology, and generates a hierarchically-structured solid comprising interconnected Co₃O₄ nanoparticles. Evaluation of these Co₃O₄ materials as electrocatalysts for the oxygen evolution reaction (OER) demonstrates that the activity of Co₃O₄ prepared by calcination of ammonia diffusion-grown precursors in both, the absence or presence of TMV exceeds that of a commercial nanopowder.

Biogenic and Synthetic Peptides with Oppositely Charged Amino Acids as Binding Sites for Mineralization

Proteins regulate diverse biological processes by the specific interaction with, e.g., nucleic acids, proteins and inorganic molecules. The generation of inorganic hybrid materials, such as shell formation in mollusks, is a protein-controlled mineralization process. Moreover, inorganic-binding peptides are attractive for the bioinspired mineralization of non-natural inorganic functional materials for technical applications. However, it is still challenging to identify mineral-binding peptide motifs from biological systems as well as for technical systems. Here, three complementary approaches were combined to analyze protein motifs consisting of alternating positively and negatively charged amino acids: (i) the screening of natural biomineralization proteins; (ii) the selection of inorganic-binding peptides derived from phage display; and (iii) the mineralization of tobacco mosaic virus (TMV)-based templates. A respective peptide motif displayed on the TMV surface had a major impact on the SiO₂ mineralization. In addition, similar motifs were found in zinc oxide- and zirconia-binding peptides indicating a general binding feature. The comparative analysis presented here raises new questions regarding whether or not there is a common design principle based on acidic and basic amino acids for peptides interacting with minerals.

Dynamic DNA-controlled "stop-and-go" assembly of well-defined protein domains on RNA-scaffolded TMV-like nanotubes

A DNA-based approach allows external control over the self-assembly process of tobacco mosaic virus (TMV)-like ribonucleoprotein nanotubes: their growth from viral coat protein (CP) subunits on five distinct RNA scaffolds containing the TMV origin of assembly (OAs) could be temporarily blocked by a stopper DNA oligomer hybridized downstream (3') of the OAs. At two upstream (5') sites tested, simple hybridization was not sufficient for stable stalling, which correlates with previous findings on a non-symmetric assembly of TMV. The growth of DNA-arrested particles could be restarted efficiently by displacement of the stopper via its toehold by using a release DNA oligomer, even after storage for twelve days. This novel strategy for growing proteinaceous tubes under tight kinetic and spatial control combines RNA guidance and its site-specific but reversible interruption by DNA blocking elements. As three of the RNA scaffolds contained long heterologous non-TMV sequence portions that included the stopping sites, this method is applicable to all RNAs amenable to TMV CP encapsidation, albeit with variable efficiency most likely depending on the scaffolds' secondary structures. The use of two distinct, selectively addressable CP variants during the serial assembly stages finally enabled an externally configured fabrication of nanotubes with highly defined subdomains. The "stop-and-go" strategy thus might pave the way towards production routines of TMV-like particles with variable aspect ratios from a single RNA scaffold, and of nanotubes with two or even more adjacent protein domains of tightly pre-defined lengths.

Virus-Templated Near-Amorphous Iron Oxide Nanotubes

We present a simple synthesis of iron oxide nanotubes, grown under very mild conditions from a solution containing Fe(II) and Fe(III), on rod-shaped tobacco mosaic virus templates. Their well-defined shape and surface chemistry suggest that these robust bionanoparticles are a versatile platform for synthesis of small, thin mineral tubes, which was achieved efficiently. Various characterization tools were used to explore the iron oxide in detail: Electron microscopy (SEM, TEM), magnetometry (SQUID-VSM), diffraction (XRD, TEM-SAED), electron spectroscopies (EELS, EDX, XPS), and X-ray absorption (XANES with EXAFS analysis). They allowed determination of the structure, crystallinity, magnetic properties, and composition of the tubes. The protein surface of the viral templates was crucial to nucleate iron oxide, exhibiting analogies to biomineralization in natural compartments such as ferritin cages.

Novel roles for well-known players: from tobacco mosaic virus pests to enzymatically active assemblies

The rod-shaped nanoparticles of the widespread plant pathogen tobacco mosaic virus (TMV) have been a matter of intense debates and cutting-edge research for more than a hundred years. During the late 19th century, their behavior in filtration tests applied to the agent causing the 'plant mosaic disease' eventually led to the discrimination of viruses from bacteria. Thereafter, they promoted the development of biophysical cornerstone techniques such as electron microscopy and ultracentrifugation. Since the 1950s, the robust, helically arranged nucleoprotein complexes consisting of a single RNA and more than 2100 identical coat protein subunits have enabled molecular studies which have pioneered the understanding of viral replication and self-assembly, and elucidated major aspects of virus-host interplay, which can lead to agronomically relevant diseases. However, during the last decades, TMV has acquired a new reputation as a well-defined high-yield nanotemplate with multivalent protein surfaces, allowing for an ordered high-density presentation of multiple active molecules or synthetic compounds. Amino acid side chains exposed on the viral coat may be tailored genetically or biochemically to meet the demands for selective conjugation reactions, or to directly engineer novel functionality on TMV-derived nanosticks. The natural TMV size (length: 300 nm) in combination with functional ligands such as peptides, enzymes, dyes, drugs or inorganic materials is advantageous for applications ranging from biomedical imaging and therapy approaches over surface enlargement of battery electrodes to the immobilization of enzymes. TMV building blocks are also amenable to external control of in vitro assembly and re-organization into technically expedient new shapes or arrays, which bears a unique potential for the development of 'smart' functional 3D structures. Among those, materials designed for enzyme-based biodetection layouts, which are routinely applied, e.g., for monitoring blood sugar concentrations, might profit particularly from the presence of TMV rods: Their surfaces were recently shown to stabilize enzymatic activities upon repeated consecutive uses and over several weeks. This review gives the reader a ride through strikingly diverse achievements obtained with TMV-based particles, compares them to the progress with related viruses, and focuses on latest results revealing special advantages for enzyme-based biosensing formats, which might be of high interest for diagnostics employing 'systems-on-a-chip'.

Bioengineering of Tobacco Mosaic Virus to Create a Non-Infectious Positive Control for Ebola Diagnostic Assays

The 2014 Ebola epidemic is the largest to date. There is no cure or treatment for this deadly disease; therefore there is an urgent need to develop new diagnostics to accurately detect Ebola. Current RT-PCR assays lack sensitive and reliable positive controls. To address this critical need, we devised a bio-inspired positive control for use in RT-PCR diagnostics: we encapsulated scrambled Ebola RNA sequences inside of tobacco mosaic virus to create a biomimicry that is non-infectious, but stable, and could therefore serve as a positive control in Ebola diagnostic assays. Here, we report the bioengineering and validation of this probe.

Fluorescent Tobacco mosaic virus-Derived Bio-Nanoparticles for Intravital Two-Photon Imaging

Multi-photon intravital imaging has become a powerful tool to investigate the healthy and diseased brain vasculature in living animals. Although agents for multi-photon fluorescence microscopy of the microvasculature are available, issues related to stability, bioavailability, toxicity, cost or chemical adaptability remain to be solved. In particular, there is a need for highly fluorescent dyes linked to particles that do not cross the blood brain barrier (BBB) in brain diseases like tumor or stroke to estimate the functional blood supply. Plant virus particles possess a number of distinct advantages over other particles, the most important being the multi-valency of chemically addressable sites on the particle surface. This multi-valency, together with biological compatibility and inert nature, makes plant viruses ideal carriers for in vivo imaging agents. Here, we show that the well-known Tobacco mosaic virus is a suitable nanocarrier for two-photon dyes and for intravital imaging of the mouse brain vasculature.

Modified TMV Particles as Beneficial Scaffolds to Present Sensor Enzymes

Tobacco mosaic virus (TMV) is a robust nanotubular nucleoprotein scaffold increasingly employed for the high density presentation of functional molecules such as peptides, fluorescent dyes, and antibodies. We report on its use as advantageous carrier for sensor enzymes. A TMV mutant with a cysteine residue exposed on every coat protein (CP) subunit (TMVCys) enabled the coupling of bifunctional maleimide-polyethylene glycol (PEG)-biotin linkers (TMVCys/Bio). Its surface was equipped with two streptavidin [SA]-conjugated enzymes: glucose oxidase ([SA]-GOx) and horseradish peroxidase ([SA]-HRP). At least 50% of the CPs were decorated with a linker molecule, and all thereof with active enzymes. Upon use as adapter scaffolds in conventional "high-binding" microtiter plates, TMV sticks allowed the immobilization of up to 45-fold higher catalytic activities than control samples with the same input of enzymes. Moreover, they increased storage stability and reusability in relation to enzymes applied directly to microtiter plate wells. The functionalized TMV adsorbed to solid supports showed a homogeneous distribution of the conjugated enzymes and structural integrity of the nanorods upon transmission electron and atomic force microscopy. The high surface-increase and steric accessibility of the viral scaffolds in combination with the biochemical environment provided by the plant viral coat may explain the beneficial effects. TMV can, thus, serve as a favorable multivalent nanoscale platform for the ordered presentation of bioactive proteins.

Peptide-equipped tobacco mosaic virus templates for selective and controllable biomineral deposition

The coating of regular-shaped, readily available nanorod biotemplates with inorganic compounds has attracted increasing interest during recent years. The goal is an effective, bioinspired fabrication of fiber-reinforced composites and robust, miniaturized technical devices. Major challenges in the synthesis of applicable mineralized nanorods lie in selectivity and adjustability of the inorganic material deposited on the biological, rod-shaped backbones, with respect to thickness and surface profile of the resulting coating, as well as the avoidance of aggregation into extended superstructures. Nanotubular tobacco mosaic virus (TMV) templates have proved particularly suitable towards this goal: Their multivalent protein coating can be modified by high-surface-density conjugation of peptides, inducing and governing silica deposition from precursor solutions in vitro. In this study, TMV has been equipped with mineralization-directing peptides designed to yield silica coatings in a reliable and predictable manner via precipitation from tetraethoxysilane (TEOS) precursors. Three peptide groups were compared regarding their influence on silica polymerization: (i) two peptide variants with alternating basic and acidic residues, i.e. lysine-aspartic acid (KD) x motifs expected to act as charge-relay systems promoting TEOS hydrolysis and silica polymerization; (ii) a tetrahistidine-exposing polypeptide (CA4H4) known to induce silicification due to the positive charge of its clustered imidazole side chains; and (iii) two peptides with high ZnO binding affinity. Differential effects on the mineralization of the TMV surface were demonstrated, where a (KD) x charge-relay peptide (designed in this study) led to the most reproducible and selective silica deposition. A homogenous coating of the biotemplate and tight control of shell thickness were achieved.

Enhanced magnetorheological performance of highly uniform magnetic carbon nanoparticles

Magnetic carbon nanoparticles (MC NPs) are prepared on a multi-gram scale through carbonization of iron-doped polypyrrole nanoparticles (PPy NPs). Three different-sized MC NPs (ca. 40, 60 and 90 nm) are prepared and adopted as dispersing materials for magnetorheological (MR) fluids to investigate the influence of particle size on MR properties. The MC NP-based MR fluids exhibit outstanding MR performances compared to the conventional magnetic carbon material-based fluids. In addition, the MR activities are enhanced with decreasing particle diameter and increasing applied magnetic field strength. Furthermore, anti-sedimentation properties are examined in order to achieve in-depth insight into the effect of the particle size on MR fluids.

Site-selective nucleation and controlled growth of gold nanostructures in tobacco mosaic virus nanotubulars

Site-selective biomineralization of Au nanostructures in the interior channel of Tobacco Mosaic Virus (TMV) is achieved by mutating threonine 103 in TMV to cysteine (T103C-TMV) to introduce the strong coordination interaction between the arrayed sulfhydryl ligands and gold species. By finely tuning the reaction conditions, Au nanoparticle chains and Au nanorods are successfully and exclusively synthesized inside the T103C-TMV nanotubes.

The Impact of Aspect Ratio on the Biodistribution and Tumor Homing of Rigid Soft-Matter Nanorods

The size and shape of nanocarriers can affect their fate in vivo, but little is known about the effect of nanocarrier aspect ratio on biodistribution in the setting of cancer imaging and drug delivery. The production of nanoscale anisotropic materials is a technical challenge. A unique biotemplating approach based on of rod-shaped nucleoprotein nanoparticles with predetermined aspect ratios (AR 3.5, 7, and 16.5) is used. These rigid, soft-matter nanoassemblies are derived from tobacco mosaic virus (TMV) components. The role of nanoparticle aspect ratio is investigated, while keeping the surface chemistries constant, using either PEGylated stealth nanoparticles or receptor-targeted RGD-displaying formulations. Aspect ratio has a profound impact on the behavior of the nanoparticles in vivo and in vitro. PEGylated nanorods with the lowest aspect ratio (AR 3.5) achieve the most efficient passive tumor-homing behavior because they can diffuse most easily, whereas RGD-labeled particles with a medium aspect ratio (AR 7) are more efficient at tumor targeting because this requires a balance between infusibility and ligand-receptor interactions. The in vivo behavior of nanoparticles can therefore be tailored to control biodistribution, longevity, and tumor penetration by modulating a single parameter: the aspect ratio of the nanocarrier.

Effect of hydrophilic silica nanoparticles on the magnetorheological properties of ferrofluids: a study using opto-magnetorheometer

For many technological applications of ferrofluids, the magnetorheological properties require being precisely controlled. We study the effect of hydrophilic silica on the magnetorheology of an oil-based ferrofluid containing Fe3O4 nanoparticles of size ∼10 nm. We observe that the presence of silica nanoparticles lowers the yield stresses, viscoelastic moduli, and shear thinning behavior of the ferrofluid because of the weakening of dipolar interactions, which was evident from the observed lower yield stresses exponent (<2). The ferrofluid containing silica exhibits a dominant elastic behavior, a reduced hysteresis during the forward and reverse magnetic field sweeps, and a longer linear viscoelastic regime under nonlinear deformation. The Mason number plots at low shear rates and magnetic fields show deviations from the master curve in the presence of silica. The magnetic field induced microstructures, visualized using opto-magnetorheometer, showed columnar aggregate structures along the field directions, which are reoriented along the shear flow direction at high shear rates. The image analysis shows that the average thickness of the columnar aggregates in pure ferrofluid is much larger than that of the mixed system, which suggests that the intervening silica matrix hampers the zippering transition of columns at higher magnetic field and shear rates. Our results suggest that optimization of rheological properties of ferrofluids is possible by carefully adding suitable silica nanoparticles, which may find practical applications such as dynamic seals, heat transfer, sensors, and opto-fluidic devices, etc.

RNA-controlled assembly of tobacco mosaic virus-derived complex structures: from nanoboomerangs to tetrapods

The in vitro assembly of artificial nanotubular nucleoprotein shapes based on tobacco mosaic virus-(TMV-)-derived building blocks yielded different spatial organizations of viral coat protein subunits on genetically engineered RNA molecules, containing two or multiple TMV origins of assembly (OAs). The growth of kinked nanoboomerangs as well as of branched multipods was determined by the encapsidated RNAs. A largely simultaneous initiation at two origins and subsequent bidirectional tube elongation could be visualized by transmission electron microscopy of intermediates and final products. Collision of the nascent tubes' ends produced angular particles with well-defined arm lengths. RNAs with three to five OAs generated branched multipods with a maximum of four arms. The potential of such an RNA-directed self-assembly of uncommon nanotubular architectures for the fabrication of complex multivalent nanotemplates used in functional hybrid materials is discussed.

Expanding the genetic code for site-specific labelling of tobacco mosaic virus coat protein and building biotin-functionalized virus-like particles

A method for site-specific and high yield modification of tobacco mosaic virus coat protein (TMVCP) utilizing a genetic code expanding technology and copper free cycloaddition reaction has been established, and biotin-functionalized virus-like particles were built by the self-assembly of the protein monomers.

Magnetorheological properties of a magnetic nanofluid with dispersed carbon nanotubes

We investigate the effect of multiwalled carbon nanotubes (MWCNTs) on the magnetorheological properties of an oil based magnetic nanofluid (ferrofluid). The shear resistant plateau observed in a pure ferrofluid disappears when 0.5 wt% of MWCNT is incorporated. The yield stress values of the composite system are slightly smaller than that of the pure system. This shows that the presence of carbon nanotubes (CNTs) weakens the magnetic field induced microstructure of the ferrofluid due to their interaction that affects the hydrodynamic and magnetic interactions between the dispersed nanoparticles. Interestingly, the Mason number plots for both the pure and composite system show scaling of the viscosity curves onto a single master curve for magnetic fields of 80 mT and above while deviations are observed for lower magnetic fields. The weakening of the ferrofluid microstructure in the presence of CNTs is further evident in the amplitude sweep measurements where the linear viscoelastic region develops only at a higher magnetic field strength compared to lower magnetic fields in pure ferrofluids. These results are useful for tailoring ferrofluids with a faster response for various applications.

The use of tobacco mosaic virus and cowpea mosaic virus for the production of novel metal nanomaterials

Due to the nanoscale size and the strictly controlled and consistent morphologies of viruses, there has been a recent interest in utilizing them in nanotechnology. The structure, surface chemistries and physical properties of many viruses have been well elucidated, which have allowed identification of regions of their capsids which can be modified either chemically or genetically for nanotechnological uses. In this review we focus on the use of such modifications for the functionalization and production of viruses and empty viral capsids that can be readily decorated with metals in a highly tuned manner. In particular, we discuss the use of two plant viruses (Cowpea mosaic virus and Tobacco mosaic virus) which have been extensively used for production of novel metal nanoparticles (<100nm), composites and building blocks for 2D and 3D materials, and illustrate their applications.

TMV nanorods with programmed longitudinal domains of differently addressable coat proteins

The spacing of functional nanoscopic elements may play a fundamental role in nanotechnological and biomedical applications, but is so far rarely achieved on this scale. In this study we show that tobacco mosaic virus (TMV) and the RNA-guided self-assembly process of its coat protein (CP) can be used to establish new nanorod scaffolds that can be loaded not only with homogeneously distributed functionalities, but with distinct molecule species grouped and ordered along the longitudinal axis. The arrangement of the resulting domains and final carrier rod length both were governed by RNA-templated two-step in vitro assembly. Two selectively addressable TMV CP mutants carrying either thiol (TMVCys) or amino (TMVLys) groups on the exposed surface were engineered and shown to retain reactivity towards maleimides or NHS esters, respectively, after acetic acid-based purification and re-assembly to novel carrier rod types. Stepwise combination of CP(Cys) and CP(Lys) with RNA allowed fabrication of TMV-like nanorods with a controlled total length of 300 or 330 nm, respectively, consisting of adjacent longitudinal 100-to-200 nm domains of differently addressable CP species. This technology paves the way towards rod-shaped scaffolds with pre-defined, selectively reactive barcode patterns on the nanometer scale.

Nanoscale science and technology with plant viruses and bacteriophages

Nanoscale science refers to the study and manipulation of matter at the atomic and molecular scales, including nanometer-sized single objects, while nanotechnology is used for the synthesis, characterization, and for technical applications of structures up to 100 nm size (and more). The broad nature of the fields encompasses disciplines such as solid-state physics, microfabrication, molecular biology, surface science, organic chemistry and also virology. Indeed, viruses and viral particles constitute nanometer-sized ordered architectures, with some of them even able to self-assemble outside cells. They possess remarkable physical, chemical and biological properties, their structure can be tailored by genetic engineering and by chemical means, and their production is commercially viable. As a consequence, viruses are becoming the basis of a new approach to the manufacture of nanoscale materials, made possible only by the development of imaging and manipulation techniques. Such techniques reach the scale of single molecules and nanoparticles. The most important ones are electron microscopy and scanning probe microscopy (both awarded with the Nobel Prize in Physics 1986 for the engineers and scientists who developed the respective instruments). With nanotechnology being based more on experimental than on theoretical investigations, it emerges that physical virology can be seen as an intrinsic part of it.