Enhancing surface plasmon detection using template-stripped gold nanoslit arrays on plastic films

Nano-Diamond-Enhanced Integrated Response of a Surface Plasmon Resonance Biosensor

Surface plasmon resonance (SPR) sensing is a real-time detection technique for measuring biomolecular interactions on gold surfaces. This study presents a novel approach using nano-diamonds (NDs) on a gold nano-slit array to obtain an extraordinary transmission (EOT) spectrum for SPR biosensing. We used anti-bovine serum albumin (anti-BSA) to bind NDs for chemical attachment to a gold nano-slit array. The covalently bound NDs shifted the EOT response depending on their concentration. The number of ND-labeled molecules attached to the gold nano-slit array was quantified from the change in the EOT spectrum. The concentration of anti-BSA in the 35 nm ND solution sample was much lower than that in the anti-BSA-only sample (approximately 1/100). With the help of 35 nm NDs, we were able to use a lower concentration of analyte in this system and obtained better signal responses. The responses of anti-BSA-linked NDs had approximately a 10-fold signal enhancement compared to anti-BSA alone. This approach has the advantage of a simple setup and microscale detection area, which makes it suitable for applications in biochip technology.

Fano-Like Resonance of Heat-Reconfigurable Silicon Grating Metasurface Tuned by Laser-Induced Graphene

We propose a heat-reconfigurable metasurface composed of the silicon-based gold grating. The asymmetric Fano-like line shape is formed due to the mutual coupling of the local surface plasmon (LSP) in the gap between the two layers of Au gratings and the surface propagating plasmon (SPP) on the surface of the Au gratings. Then, we effectively regulate the Fano resonance by applying a bias voltage to laser-induced graphene (LIG), to generate Joule heat, so that the resonant dip of one mode of the Fano resonance can shift up to 28.5 nm. In contrast, the resonant dip of the other mode barely changes. This effectively regulates the coupling between two resonant modes in Fano resonance. Our study presents a simple and efficient method for regulating Fano-like interference in the near-infrared band.

Wafer-Scale Room-Temperature Bonding of Smooth Au/Ti-Based Getter Layer for Vacuum Packaging

This study demonstrates room-temperature bonding using a getter layer for the vacuum packaging of microsystems. A thick Ti layer covered with an Au layer is utilized as a getter layer because it can absorb gas molecules in the package. Additionally, smooth Au surfaces can form direct bonds for hermetic sealing at room temperature. Direct bonding using a getter layer can simplify the vacuum packaging process; however, typical getter layers are rough in bonding formation. This study demonstrates two fabrication techniques for smooth getter layers. In the first approach, the Au/Ti layer is bonded to an Au layer on a smooth SiO₂ template, and the Au/SiO₂ interface is mechanically exfoliated. Although the root-mean-square roughness was reduced from 2.00 to 0.98 nm, the surface was still extremely rough for direct bonding. In the second approach, an Au/Ti/Au multilayer on a smooth SiO₂ template is bonded with a packaging substrate, and the Au/SiO₂ interface is exfoliated. The transferred Au/Ti/Au getter layer has a smooth surface with the root-mean-square roughness of 0.54 nm and could form wafer-scale direct bonding at room temperature. We believe that the second approach would allow a simple packaging process using direct bonding of the getter layer.

Materials Perspectives of Integrated Plasmonic Biosensors

With the growing need for portable, compact, low-cost, and efficient biosensors, plasmonic materials hold the promise to meet this need owing to their label-free sensitivity and deep light-matter interaction that can go beyond the diffraction limit of light. In this review, we shed light on the main physical aspects of plasmonic interactions, highlight mainstream and future plasmonic materials including their merits and shortcomings, describe the backbone substrates for building plasmonic biosensors, and conclude with a brief discussion of the factors affecting plasmonic biosensing mechanisms. To do so, we first observe that 2D materials such as graphene and transition metal dichalcogenides play a major role in enhancing the sensitivity of nanoparticle-based plasmonic biosensors. Then, we identify that titanium nitride is a promising candidate for integrated applications with performance comparable to that of gold. Our study highlights the emerging role of polymer substrates in the design of future wearable and point-of-care devices. Finally, we summarize some technical and economic challenges that should be addressed for the mass adoption of plasmonic biosensors. We believe this review will be a guide in advancing the implementation of plasmonics-based integrated biosensors.

Hybrid modes in gold nanoslit arrays on Bragg nanostructures and their application for sensitive biosensors

In this work, we present high-performance surface plasmonic sensors using gold nanostructures and Bragg photonic structures. The gold film on the Bragg structure provides Tamm plasmon states (TPs). The Fano coupling between higher order TPs and Bloch-wave surface plasmon polariton (BW-SPP) on the gold nanoslit array results in a new hybrid Tamm-plasmon mode. Using finite-difference time-domain calculations, we demonstrate that the hybrid mode has the advantages of high surface sensitivity of BW-SPP mode and high resonant quality of Tamm state. The calculated plasmonic field distribution shows that the hybrid mode has a similar evanescent distribution with BW-SPP mode on gold surface and TPs field in the Bragg structure. The experimental results verify that the hybrid mode has one hundred times higher wavelength sensitivity than the Tamm state. The figure of merit of the hybrid mode is five times better than the BW-SPP mode in conventional nanoslit arrays. The real-time sensorgram further confirms that the hybrid mode has a much higher sensitivity and better signal to noise ratios in the biomolecular interaction measurement.

Highly Sensitive TiO2/Au/Graphene Layer-Based Surface Plasmon Resonance Biosensor for Cancer Detection

In this article, a hybrid TiO2/Au/graphene layer-based surface plasmon resonance (SPR) sensor with improved sensitivity and capability for cancer detection is presented. The finite element method (FEM) was used for numerical analysis. The proposed SPR biosensor was structured based on the angular analysis of the attenuated total reflection (ATR) method for the detection of various types of cancer using the refractive index component. The resonance angle shifted owing to the increment of normal and cancerous cells' refractive index, which varied between 1.36 and 1.401 for six different types of normal and cancerous cells. According to numerical results, the obtained sensitivities for skin (basal), cervical (HeLa), adrenal gland (PC12), blood (Jurkat), and breast (MCF-7 and MDA-MB-231) cancer cells were 210 deg/RIU, 245.83 deg/RIU, 264.285 deg/RIU, 285.71 deg/RIU, 292.86 deg/RIU, and 278.57 deg/RIU, respectively. Furthermore, the detection accuracy (DA), figure of merits (FOM), and signal-to-noise ratio (SNR) were also obtained, with values of 0.263 deg^-1, 48.02 RIU^-1, and 3.84, respectively. Additionally, the distribution of the electric field and the propagation of the magnetic field for resonant and non-resonant conditions of the proposed structure were illustrated. It was found that an enhanced field was exhibited on the surface of the plasmonic material for resonant conditions. We also measured the penetration depth of 180 nm using decayed electric field intensity. Furthermore, the impact of using a TiO2/Au/graphene layer was demonstrated. We further conducted analyses of the effects of the thickness of the gold layer and the effects of additional graphene layers on overall sensitivities for six different types of cancer. The proposed TiO2/Au/graphene layered structure exhibited the highest overall sensitivity in terms of detecting cancerous cells from healthy cells. Moreover, the proposed sensor was numerically analyzed for a wide range of biological solutions (refractive index 1.33-1.41), and the sensor linearity was calculated with a linear regression coefficient (R²) of 0.9858. Finally, numerical results obtained in this manuscript exhibited high sensitivity in comparison with previously reported studies.

Kerr nonlinear medium assisted double-face absorbers for differential manipulation via an all-optical operation

Recently, light absorbers have attracted great attentions due to their promising in applications in functional optoelectronic devices. Herein, we theoretically propose and numerically demonstrate a new absorber platform, which consists of a 280-nm-thick photonic nonlinear waveguide film covering on the metal grating structure. Strong reflection inhibition and absorption enhancement is achieved in both the forward and backward directions, which indicates potential novel performances since the previous reports only achieved absorption in one side due to the using of opaque metal film substrate or the reflective mirror. The anti-reflection bands or the absorption peaks at the shorter and longer wavelength ranges are related to the excitation of the propagating surface plasmon resonance by the slit-assisted grating and the cavity mode by the slit in the metal film. Strong differential manipulation is realized for the double-face absorbers via the all-optical operation. Moreover, the operation wavelengths for the double-face light absorber can be modified strongly via using an asymmetric dielectric medium for the coating films. These new findings pave approaches for subtractive lightwave modulation technology, selective filtering, multiplex sensing and detection, etc.

One-step formation of a plasmonic grating with an ultranarrow resonance linewidth for sensing

Nanograting-based plasmonic sensors are capable of real-time and label-free detection for biomedical applications. Simple and low-cost manufacturing methods of high-quality sensors are always demanding. In this study, we report on a one-step etch-free method achieved by directly patterning a photoresist on a copper substrate using laser interference lithography. Large area uniform gratings with a period of 600 nm were fabricated on the copper film, and its refractive index sensing performance was tested using glucose as analyte. By replacing the metallic grating ridges with photoresist ridges, the Ohmic absorption and radiative scattering losses of surface plasmons were greatly reduced. As a result, a much sharper resonance linewidth (∼ 10 nm) was experimentally obtained. Compared with pure metallic gratings, the reported structure is characterized by sharper resonance and a much easier fabrication process, making it a cost-effective plasmonic sensor with high quality.

Self-referenced refractive index sensor based on double-dips method with bimetal-dielectric and double-groove grating

Self-referenced refractive index sensors allow more accurate measurements and reduce the influence of extraneous factors. This work proposed a high-sensitivity, self-referenced surface plasmon resonance sensor with Na grating and Au-ZnS composite grating. When Transverse Magnetic-polarized light is incident into the prism, three surface plasmon resonances are excited at the interface of Na-MgF₂ grating and Au-ZnS grating. The first one is treated as the reference angle, the second and third are forward and backward surface plasmon resonance, respectively. Using the angular modulation, the single-dip sensitivities are 329.41 deg/RIU and 788.24 deg/RIU in the range of 1.330-1.347. To further improve the performance of the sensor, the double-dips method is adopted, and the average sensitivity in the range of 1.330-1.347 is 1117.65 deg/RIU, while the maximum reaches 4390 deg/RIU. Due to high sensitivity, a good figure of merit can be obtained even with a larger full width at half maximum of 3.30°. This proposed sensor provides potential application in the research of biomolecular detection and chemical testing.

Continuous polymerase chain reaction microfluidics integrated with a gold-capped nanoslit sensing chip for Epstein-Barr virus detection

We present the first combination of a microfluidic polymerase chain reaction (PCR) with a gold nanoslit-based surface plasmon resonance (SPR) sensor for detecting the DNA sequence of latent membrane protein 1 (LMP1). The PCR microchannel was produced through a laser scribing technique, and the SPR nanoslit chip was manufactured via hot-embossing nanoimprinting lithography. Afterward, the LMP1 DNA probe was adsorbed onto the SPR chip of the integrated device through electrostatic interactions for further detection. The device can complete the analytical procedure in around 36 min, while the traditional machine requires 105 min to achieve similar signals under the same PCR thermal cycles. The calibration curve with serially diluted LMP1 DNA exhibited the accuracy (R² > 0.99) and sensitivity (limit of detection: ∼10^-11 g/mL) of the device. Moreover, extracted DNA from Epstein-Barr virus (EBV)-positive cells were directly detected through the integrated chip. In brief, this all-in-one chip can amplify gene fragments at the front-end and detect them at the back-end, decreasing the time required for the analysis without compromising accuracy or sensitivity. We believe this label-free, real-time, low-cost device has enormous potential for rapid detection of various viruses, such as EBV and COVID-19.

Combination of Capped Gold Nanoslit Array and Electrochemistry for Sensitive Aqueous Mercuric Ions Detection

Label-free surface plasmon resonance (SPR) detection of mercuric ions in various aqueous solutions, using capped gold nanoslit arrays combined with electrochemical (EC) sensing technique, is demonstrated. The nanoslit arrays are fabricated on flexible cyclo-olefin polymer substrates by a nanoimprinting lithography method. The EC and SPR signals for the investigation of current responses and transmission SPR spectra are simultaneously measured during metal ions electrodeposition. Glycerol-water solution is studied to evaluate the resonant peak wavelength sensitivity (480.3 nm RIU^-1) with a FOM of 40.0 RIU^-1 and the obtained intensity sensitivity is 1819.9%. The ferrocyanide/ferricyanide redox couple performs the diffusion controlled electrochemical processes (R² = 0.99). By investigating the SPR intensity changes and wavelength shifts of various mercuric ion concentrations, the optical properties are evaluated under chronoamperometric conditions. The sensors are evaluated in the detection range between 100 μM and 10 nM with a detection limit of 1 μM. The time dependence of SPR signals and the selectivity of 10 μM Hg²⁺ in the presence of 10 μM interfering metal ion species from Ca²⁺, Co²⁺, Ni²⁺, Na⁺, Cu²⁺, Pb^{2 +} and Mn²⁺ are determined. The capped gold nanoslit arrays show the selectivity of Hg²⁺ and the EC sensing method is effectively utilized to aqueous Hg²⁺ detection. This study provides a label-free detection technique of mercuric ions and this developed system is potentially applicable to detecting chemicals and biomolecules.

Self-referencing biosensors using Fano resonance in periodic aluminium nanostructures

Surface plasmon resonance (SPR) is an important technique for real-time and label-free detection of specific binding biomolecules. However, conventional SPR signals come from both the surface binding biomolecules and the variation in the bulk refractive index. This work demonstrates that Fano resonance in an aluminum capped nanoslit array has the ability to remove the signal of bulk refractive index changes from the SPR signal. As compared to gold nanostructures, the aluminum nanostructure provides an asymmetrical Fano resonance with clear peak and dip wavelengths. The peak wavelength is close to the grating resonance condition. The evanescent depth at the peak wavelength is up to several microns. The dip wavelength comes from the SPR effect. The evanescent depth at the dip wavelength is about 300 nm. By simultaneously measuring the shifts of peaks and the dip wavelengths, the variation in the bulk refractive index can be removed and only the biolayer thickness is measured. The finite-difference time-domain calculation shows that the 470 nm-period nanoslit array with 90 and 70 nm slit depths has the optimal thickness sensitivity. In this experiment, a simple multispectral imaging system is developed for multiple bio-interaction measurements. The measured results verify that the bulk refractive index changes can be removed and the surface biomolecular interactions can be directly obtained without the need of a reference channel.

Surface Plasmonic Sensors: Sensing Mechanism and Recent Applications

Surface plasmonic sensors have been widely used in biology, chemistry, and environment monitoring. These sensors exhibit extraordinary sensitivity based on surface plasmon resonance (SPR) or localized surface plasmon resonance (LSPR) effects, and they have found commercial applications. In this review, we present recent progress in the field of surface plasmonic sensors, mainly in the configurations of planar metastructures and optical-fiber waveguides. In the metastructure platform, the optical sensors based on LSPR, hyperbolic dispersion, Fano resonance, and two-dimensional (2D) materials integration are introduced. The optical-fiber sensors integrated with LSPR/SPR structures and 2D materials are summarized. We also introduce the recent advances in quantum plasmonic sensing beyond the classical shot noise limit. The challenges and opportunities in this field are discussed.

High-sensitivity plasmonic sensor by narrowing Fano resonances in a tilted metallic nano-groove array

Plasmonic sensors exhibit enormous potential in the areas of environmental monitoring, biomedical diagnostics, healthcare, food safety, security, and chemical reactions. However, the large bandwidths of surface-plasmon response spectra greatly reduce the sensitivities and detection limits of plasmonic sensors. Herein, we propose to tilt a metallic nano-groove array to reduce linewidths of Fano resonances, and the figure of merit (FOM) of a refractive index sensor is greatly increased. The Fano resonances stem from interference between narrow SPP resonant modes and a broad LSP mode in the metallic nano-groove array. When tilting the metallic nano-groove array, new Fano resonances emerge, greatly compressing the linewidth of Fano resonance of interest to ∼1.1 nm in the simulation. Experimentally, a narrow Fano resonance with a linewidth of Δλ≈2.5 nm is achieved, and a high-FOM (FOM ≈ 263) plasmonic sensor is demonstrated. This value of FOM is more than 4.7 times that (FOM ≤ 55) of Fano sensors based on SPP modes, and it is even approximately twice that (FOM ≈ 140) of the previous Fano sensor based on Wood's Anomaly.

Nanoaperture fabrication in ultra-smooth single-grain gold films with helium ion beam lithography

We demonstrate a simple three-step gold thin-film sample preparation process to enhance the morphology and lithographic precision using helium ion based direct-writing. The procedure includes metal deposition, heat treatment and template stripping, which produce smooth monocrystalline gold grains with sizes up to 500 nm and an average surface roughness of 0.267 nm. By using a helium ion microscope, we can fabricate structures with feature sizes less than 20 nm in a 100 nm thick gold film with high-quality sidewalls. We demonstrate the efficacy of this technique by producing high-quality double nanohole (DNH) nanoapertures for single nanoparticle trapping in a single grain of 100 nm thick gold. This procedure can be applied to a wide range of antenna geometries and features that need to be fabricated producing optical and or electronic devices.

Template Stripping Method-Based Au Nanoarray for Surface-Enhanced Raman Scattering Detection of Antiepileptic Drug

Surface-enhanced Raman scattering (SERS) is a potential candidate for highly sensitive detection of target molecules. A SERS active substrate with a noble metal nanostructure is required for this. However, a SERS active substrate requires complicated fabrication procedures. This in turn makes it difficult to fabricate highly sensitive SERS active substrates with high reproducibility. To overcome this difficulty, a plasmonic crystal (PC) with periodic noble metal nanostructures was fabricated via the template-stripping method using a polymer-based template. Using SERS active substrates, SERS was successfully achieved using the PC by detecting low concentrations of phenobarbital which is an antiepileptic drug using a commercially available portable Raman module. The PC can be fabricated by demolding the deposited gold layer from a polymer-based template. This method is rapid, economic, and has high reproducibility. SERS can be achieved easily using this PC for a wide variety of applications such as medical, pharmaceutical, and environmental protection.

Nanostructured Color Filters: A Review of Recent Developments

Color plays an important role in human life: without it life would be dull and monochromatic. Printing color with distinct characteristics, like hue, brightness and saturation, and high resolution, are the main characteristic of image sensing devices. A flexible design of color filter is also desired for angle insensitivity and independence of direction of polarization of incident light. Furthermore, it is important that the designed filter be compatible with the image sensing devices in terms of technology and size. Therefore, color filter requires special care in its design, operation and integration. In this paper, we present a comprehensive review of nanostructured color filter designs described to date and evaluate them in terms of their performance.

Plasmonic Sensing on Symmetric Nanohole Arrays Supporting High-Q Hybrid Modes and Reflection Geometry

Refractometric sensors utilizing surface plasmon resonance (SPR) should satisfy a series of performance metrics, bulk sensitivity, thin-film sensitivity, refractive-index resolution, and high-Q-factor resonance, as well as practical requirements such as manufacturability and the ability to separate optical and fluidic paths via reflection-mode sensing. While many geometries such as nanohole, nanoslit, and nanoparticles have been employed, it is nontrivial to engineer nanostructures to satisfy all of the aforementioned requirements. We combine gold nanohole arrays with a water-index-matched Cytop film to demonstrate reflection-mode, high-Q-factor (Q_exp = 143) symmetric plasmonic sensor architecture. Using template stripping with a Cytop film, we can replicate a large number of index-symmetric nanohole arrays, which support sharp plasmonic resonances that can be probed by light reflected from their backside with a high extinction amplitude. The reflection geometry separates the optical and microfluidic paths without sacrificing sensor performance as is the case of standard (index-asymmetric) nanohole arrays. Furthermore, plasmon hybridization caused by the array refractive-index symmetry enables dual-mode detection that allows distinction of refractive-index changes occurring at different distances from the surface, making it possible to identify SPR response from differently sized particles or to distinguish binding events near the surface from bulk index changes. Due to the unique combination of a dual-mode reflection-configuration sensing, high-Q plasmonic modes, and template-stripping nanofabrication, this platform can extend the utility of nanohole SPR for sensing applications involving biomolecules, polymers, nanovesicles, and biomembranes.

Designable Spectrometer-Free Index Sensing Using Plasmonic Doppler Gratings

Typical nanoparticle-based plasmonic index sensors detect the spectral shift of localized surface plasmon resonance (LSPR) upon the change of the environmental index. Therefore, they require broadband illumination and spectrometers. The sensitivity and flexibility of nanoparticle-based index sensors are usually limited because LSPR peaks are usually broad and the spectral position cannot be freely designed. Here, we present a fully designable index sensing platform using plasmonic Doppler gratings (PDGs), which provide broadband and azimuthal angle dependent grating periodicity. Different from LSPR sensors, PDG index sensors are based on the momentum matching between photons and surface plasmons via the lattice momentum of the grating. Therefore, the index change is translated into the variation of the in-plane azimuthal angle for photon-to-plasmon coupling, which manifests as directly observable dark bands in the reflection image. The PDG can be freely designed to optimally match the range of index variation for specific applications. In this work, we demonstrate PDG index sensors for large (n = 1.00-1.52) and small index variations (n = 1.3330-1.3650). The tiny and nonlinear index change of the water-ethanol mixture has been clearly observed and accurately quantified. Since the PDG is a dispersive device, it enables on-site and single-color index sensing without a spectrometer and provides a promising spectroscopic platform for on-chip analytical applications.

Nanostructured metals for light-based technologies

The basic theoretical understanding of light interacting with nanostructured metals that has existed since the early 1900s has become more relevant in the last two decades, largely because of new approaches to structure metals down to the nanometer scale or smaller. Here, a broad overview of the concepts and applications of nanostructuring metals for light-based technologies is given. The theory of the response of metals to an applied oscillating field is given, including a discussion of nonlocal, nonlinear and quantum effects. Using this metal response, the guiding of electromagnetic (light) waves using metals is given, with a particular emphasis on the impact of nanostructured metals for tighter confinement and slower propagation. Similarly, the influence of metal nanostructures on light scattering by isolated metal structures, like nanoparticles and nanoantennas, is described, with basic results presented including plasmonic/circuit resonances, the single channel limit, directivity enhancement, the maximum power transfer theorem, limits on the magnetic response from kinetic inductance and the scaling of gap plasmons to the nanometer scale and smaller. A brief overview of nanofabrication approaches to creating metal nanostructures is given. Finally, existing and emerging light-based applications are presented, including those for sensing, spectroscopy (including local refractive index, Raman, IR absorption), detection (including Schottky detectors), switching (including terahertz photoconductive antennas), modulation, energy harvesting and photocatalysis, light emission (including lasers and tunneling based light emission), optical tweezing, nonlinear optics, subwavelength imaging and lithography and high density data storage.

Simultaneous assessment of cell morphology and adhesion using aluminum nanoslit-based plasmonic biosensing chips

A variety of physiological and pathological processes rely on cell adhesion, which is most often tracked by changes in cellular morphology. We previously reported a novel gold nanoslit-based biosensor that is capable of real-time and label-free monitoring of cell morphological changes and cell viability. However, the preparation of gold biosensors is inefficient, complicated and costly. Recently, nanostructure-based aluminum (Al) sensors have been introduced for biosensing applications. The Al-based sensor has a longer decay length and is capable of analyzing large-sized mass such as cells. Here, we developed two types of double-layer Al nanoslit-based plasmonic biosensors, which were nanofabricated and used to evaluate the correlation between metastatic potency and adhesion of lung cancer and melanoma cell lines. Cell adhesion was determined by Fano resonance signals that were induced by binding of the cells to the nanoslit. The peak and dip of the Fano resonance spectrum respectively reflected long- and short-range cellular changes, allowing us to simultaneously detect and distinguish between focal adhesion and cell spreading. Also, the Al nanoslit-based biosensor chips were used to evaluate the inhibitory effects of drugs on cancer cell spreading. We are the first to report the use of double layer Al nanoslit-based biosensors for detection of cell behavior, and such devices may become powerful tools for anti-metastasis drug screening in the future.

Nanohole array plasmonic biosensors: Emerging point-of-care applications

Point-of-care (POC) applications have expanded hugely in recent years and is likely to continue, with an aim to deliver cheap, portable, and reliable devices to meet the demands of healthcare industry. POC devices are designed, prototyped, and assembled using numerous strategies but the key essential features that biosensing devices require are: (1) sensitivity, (2) selectivity, (3) specificity, (4) repeatability, and (5) good limit of detection. Overall the fabrication and commercialization of the nanohole array (NHA) setup to the outside world still remains a challenge. Here, we review the various methods of NHA fabrication, the design criteria, the geometrical features, the effects of surface plasmon resonance (SPR) on sensing as well as current state-of-the-art of existing NHA sensors. This review also provides easy-to-understand examples of NHA-based POC biosensing applications, its current status, challenges, and future prospects.

Intensity-modulated nanoplasmonic interferometric sensor for MMP-9 detection

To elucidate the secretary function of immune cells, we develop a nanoplasmonic circular interferometric biosensor based on intensity interrogation for label-free and dynamic sensing of molecular secretion. Exceptional sensitivity has been demonstrated through coupling free light and surface plasmon polariton (SPPs) waves, which generates a constructive and deconstructive interference pattern with high contrast and narrow linewidth when illuminated by white light. Alternatively, by adopting a narrow-band LED source and a CCD camera in this work, the transmission intensity of multiple sensing units is monitored simultaneously with a simple collinear optical setup. This intensity-modulated sensing platform yields a resolution of 4.1 × 10-5 refractive index unit (RIU) with a high temporal resolution of 1 s and a miniaturized footprint as small as 9.8 × 9.8 μm2 for a single sensing unit. By integrating the signals from multiple sensor units, the resolution of a 12 × 12 sensor array was found to reach 7.3 × 10-6 RIU. We apply this sensor array to detect matrix metalloproteinase 9 (MMP-9) secretion from human monocytic cells, THP-1, at different time points after lipopolysaccharide (LPS) simulation and the results are in good agreement with enzyme-linked immunosorbent assay (ELISA) tests, but without the need for labeling. The spatial, temporal and mass resolutions of the sensor array are found to exceed other label-free technologies. These biomolecular arrays, incorporated in a microfluidic sensor platform, hold great potential for the study the dynamics and interplay of cell secretion signals and achieving a better understanding of single cell functions.

Recent Advances in Surface Plasmon Resonance Imaging Sensors

The surface plasmon resonance (SPR) sensor is an important tool widely used for studying binding kinetics between biomolecular species. The SPR approach offers unique advantages in light of its real-time and label-free sensing capabilities. Until now, nearly all established SPR instrumentation schemes are based on single- or several-channel configurations. With the emergence of drug screening and investigation of biomolecular interactions on a massive scale these days for finding more effective treatments of diseases, there is a growing demand for the development of high-throughput 2-D SPR sensor arrays based on imaging. The so-called SPR imaging (SPRi) approach has been explored intensively in recent years. This review aims to provide an up-to-date and concise summary of recent advances in SPRi. The specific focuses are on practical instrumentation designs and their respective biosensing applications in relation to molecular sensing, healthcare testing, and environmental screening.

All-Metal Broadband Optical Absorbers Based on Block Copolymer Nanolithography

The growing interest in solar energy during recent years has spurred on the development of high-efficiency optical absorbers using emerging concepts in plasmonics and metamaterials. Most absorber designs require patterning on a subwavelength scale, making large-scale fabrication expensive or impractical. This study presents an all-metal metasurface with tightly packed, sub-80 nm nanodomes fabricated by template-stripping thin gold films from reusable silicon templates. Subwavelength patterning was achieved via molecular self-assembly of block copolymers, which enables large-area, periodic patterning with nanometer precision. The proposed nanodome surface acts as an optical absorber capable of absorbing 97% of incident light in the visible range 320-650 nm, and still more than 90% at high incidence angles. We demonstrate both experimentally and theoretically that the absorption behavior of the thin film can be controlled by changing the size of the nanodomes, namely, the gap between the structures. The enhanced absorption of light is attributed to localized particle plasmon and gap plasmon resonances. This research provides a straightforward and cost-effective strategy to design and fabricate thin, large-area, light-absorbing coatings that can be transferred onto nearly any rigid or flexible substrate. The all-metal metasurfaces are a promising candidate for plasmon-induced hot electron generation for efficient solar energy conversion in photovoltaic and photocatalytic devices.

Enhancing Surface Sensing Sensitivity of Metallic Nanostructures using Blue-Shifted Surface Plasmon Mode and Fano Resonance

Improving surface sensitivities of nanostructure-based plasmonic sensors is an important issue to be addressed. Among the SPR measurements, the wavelength interrogation is commonly utilized. We proposed using blue-shifted surface plasmon mode and Fano resonance, caused by the coupling of a cavity mode (angle-independent) and the surface plasmon mode (angle-dependent) in a long-periodicity silver nanoslit array, to increase surface (wavelength) sensitivities of metallic nanostructures. It results in an improvement by at least a factor of 4 in the spectral shift as compared to sensors operated under normal incidence. The improved surface sensitivity was attributed to a high refractive index sensitivity and the decrease of plasmonic evanescent field caused by two effects, the Fano coupling and the blue-shifted resonance. These concepts can enhance the sensing capability and be applicable to various metallic nanostructures with periodicities.

Outstanding surface plasmon resonance performance enabled by templated oxide gratings

Here we report a simple and scalable soft-lithography-based templating technology for fabricating Au-covered oxide (titania and zirconia) gratings by using DVDs as a structural template. The resulting plasmonic gratings simultaneously exhibit very high surface plasmon resonance (SPR) sensitivity (up to ∼940 nm per refractive index unit, nm per RIU) and figure of merit (FOM, up to 62.5). The effects of thermal annealing of the templated oxide gratings on their final plasmonic properties have been systematically investigated by both experiments and finite-difference time-domain (FDTD) simulations. Higher SPR sensitivities and slightly reduced FOMs have been observed for the annealed gratings. Additionally, the amplitude of the SPR dips gradually decreases with increasing annealing temperatures. Scanning electron microscopy and X-ray diffraction show that the annealing process enlarges the crystal domain sizes of the oxides and smoothens the final plasmonic grating surface. Systematic FDTD simulations reveal that the SPR properties (e.g., dip amplitude) of Au-covered oxide gratings are significantly affected by the deformation of the track-pitch structure caused by thermal annealing, agreeing with the experimental results. The outstanding SPR performance combined with the high thermal stability of the crystalline oxides could make the templated plasmonic gratings a promising SPR platform for many important sensing applications, such as in situ probing heterogeneous catalytic reactions under realistic conditions.

Gold Nanoparticles Used as Protein Scavengers Enhance Surface Plasmon Resonance Signal

Although several researchers had reported on methodologies for surface plasmon resonance (SPR) signal amplification based on the use of nanoparticles (NPs), the majority addressed the sandwich technique and low protein concentration. In this work, a different approach for SPR signal enhancement based on the use of gold NPs was evaluated. The method was used in the detection of two lectins, peanut agglutinin (PNA) and concanavalin A (ConA). Gold NPs were functionalized with antibodies anti-PNA and anti-ConA, and these NPs were used as protein scavengers in a solution. After being incubated with solutions of PNA or ConA, the gold NPs coupled with the collected lectins were injected on the sensor containing the immobilized antibodies. The signal amplification provided by this method was compared to the signal amplification provided by the direct coupling of PNA and ConA to gold NPs. Furthermore, both methods, direct coupling and gold NPs as protein scavengers, were compared to the direct detection of PNA and ConA in solution. Compared to the analysis of free protein, the direct coupling of PNA and ConA to gold NPs resulted in a signal amplification of 10-40-fold and a 13-fold decrease of the limit of detection (LOD), whereas the use of gold NPs as protein scavengers resulted in an SPR signal 40-50-times higher and an LOD 64-times lower.

Enhancing Surface Sensitivity of Nanostructure-Based Aluminum Sensors Using Capped Dielectric Layers

The studies of nanostructure-based aluminum sensors have attracted huge attention because aluminum is a more cost-effective plasmonic material. However, the intrinsic properties of the aluminum metal, having a large imaginary part of the dielectric function and a longer electromagnetic field decay length and problems of poor long-term chemical stability, limit the surface-sensing capability and applicability of nanostructures. We propose the combination of capped aluminum nanoslits and a thin-capped dielectric layer to overcome these limitations. We show that the dielectric layer can positively enhance the wavelength sensitivities of the Wood's anomaly-dominant resonance and asymmetric Fano resonance in capped aluminum nanoslits. The maximum improvement can be reached by a factor of 3.5. Besides, there is an optimal layer thickness for the surface sensitivity because of the trade-off relationship between the refractive index sensitivity and decay length. We attribute the enhanced surface sensitivity to a reduced evanescent length, which is confirmed by the finite difference time-domain calculations. The protein-protein interaction experiments verify the high-surface sensitivity of the structures, and a limit of quantification (LOQ) of 1 pg/mL anti-bovine serum albumin is achieved. Such low-cost, highly sensitive aluminum-based nanostructures can benefit various sensing applications.

High Figure of Merit (FOM) of Bragg Modes in Au-Coated Nanodisk Arrays for Plasmonic Sensing

Gold-coated nanodisk arrays of nearly micron periodicity are reported that have high figure of merit (FOM) and sensitivity necessary for plasmonic refractometric sensing, with the added benefit of suitability for surface-enhanced Raman scattering (SERS), large-scale microfabrication using standard photolithographic techniques and a simple instrumental setup. Gold nanodisk arrays are covered with a gold layer to excite the Bragg modes (BM), which are the propagative surface plasmons localized by the diffraction from the disk array. This generates surface-guided modes, localized as standing waves, leading to highly confined fields confirmed by a mapping of the SERS intensity and numerical simulations with 3D finite element method. The optimal gold-coated nanodisk arrays are applied for refractometric sensing in transmission spectroscopy with better performance than nanohole arrays and they are integrated to a 96-well plate reader for detection of IgY proteins in the nanometer range in PBS. The potential for sensing in biofluids is assessed with IgG detection in 1:1 diluted urine. The structure exhibits a high FOM of up to 46, exceeding the FOM of structures supporting surface plasmon polaritons and comparable to more complex nanostructures, demonstrating that subwavelength features are not necessary for high-performance plasmonic sensing.

Self-reference plasmonic sensors based on double Fano resonances

High-sensitivity plasmonic refractive index sensors show great applications in the areas of biomedical diagnostics, healthcare, food safety, environmental monitoring, homeland security, and chemical reactions. However, the unstable and complicated environments considerably limit their practical applications. By employing the independent double Fano resonances in a simple metallic grating, we experimentally demonstrate a self-reference plasmonic sensor, which significantly reduces the error contributions of the light intensity fluctuations in the long-distance propagation and local temperature variations at the metallic grating, and the detection accuracy is guaranteed. The numerical simulation shows that the two Fano resonances have different origins and are independent of each other. As a result, the left Fano resonance is quite sensitive to the refractive index variations above the metal surface, while the right Fano resonance is insensitive to that. Experimentally, a high figure of merit (FOM) of 31 RIU^-1 and a FOM* of 860 RIU^-1 are realized by using the left Fano resonance. More importantly, by using the right Fano resonance as a reference signal, the influence of the light intensity fluctuations and local temperature variations is monitored and eliminated in the experiment. This simple self-reference plasmonic sensor based on the double Fano resonances may find important applications in highly-sensitive and accurate sensing under unstable and complicated environments, as well as multi-parameter sensing.

Design and characterization of a plasmonic Doppler grating for azimuthal angle-resolved surface plasmon resonances

We present a two-dimensional plasmonic Doppler grating (PDG) for broadband and azimuthal angle-resolved nanophotonic applications. The PDG consists of a set of non-concentric circular rings mimicking the wavefronts of a moving point source that exhibits the Doppler effect and thereby offers a continuous azimuthal angle-dependent lattice momentum for photon-plasmon coupling. The center and span of the working frequency window are fully designable for optimal performance in specific applications. We detail the design, fabrication and optical characterization of the PDG. The design of the Doppler grating provides a general platform for in-plane angle-resolved nanophotonic applications.

Multiobjective optimization for a plasmonic nanoslit array sensor using Kriging models

We propose an efficient multiobjective optimization approach for a plasmonic nanoslit array sensor using Kriging surrogate models. The universal Kriging models whose regression functions are zeroth-, first-, and second-order polynomials are adopted to estimate objective functions. The multiobjective extension of the genetic algorithm is used for Pareto optimal sensor geometry. The objective functions are the figure of merit defined as a ratio of peak wavelength shift at molecular adsorption and 3 dB bandwidth of transmission spectrum, and peak transmission power, respectively. The optical properties of a plasmonic slit sensor are investigated, such as transmission power, bandwidth, and peak shift, using the finite element method.

Low-cost and large-size nanoplasmonic sensor based on Fano resonances with fast response and high sensitivity

We have developed a low-cost, fast and sensitive plasmonic sensor with a large-size for easy handling. The sensor is formed by a Au nanobelt grating fabricated by soft lithography with a period of 780 nm and a width of 355 nm in an even and uniform area of ~2 × 2 cm². The sensor uses the Fano-shaped third order mode localized plasmon resonance of the Au nanobelts, which appears in the visible part of the transmission spectrum. We have found a detection resolution of 1.56 × 10^-5 refractive index units with a temporal resolution of 1 s in a sensing area of 0.75 × 0.75 mm². The high uniformity and size of the sensor permit the detection using a simple optical system, which provides the device with the potential to be used as an easy to handle, portable and disposable sensor.

Low-Cost and Rapid Fabrication of Metallic Nanostructures for Sensitive Biosensors Using Hot-Embossing and Dielectric-Heating Nanoimprint Methods

We propose two approaches—hot-embossing and dielectric-heating nanoimprinting methods—for low-cost and rapid fabrication of periodic nanostructures. Each nanofabrication process for the imprinted plastic nanostructures is completed within several seconds without the use of release agents and epoxy. Low-cost, large-area, and highly sensitive aluminum nanostructures on A4 size plastic films are fabricated by evaporating aluminum film on hot-embossing nanostructures. The narrowest bandwidth of the Fano resonance is only 2.7 nm in the visible light region. The periodic aluminum nanostructure achieves a figure of merit of 150, and an intensity sensitivity of 29,345%/RIU (refractive index unit). The rapid fabrication is also achieved by using radio-frequency (RF) sensitive plastic films and a commercial RF welding machine. The dielectric-heating, using RF power, takes advantage of the rapid heating/cooling process and lower electric power consumption. The fabricated capped aluminum nanoslit array has a 5 nm Fano linewidth and 490.46 nm/RIU wavelength sensitivity. The biosensing capabilities of the metallic nanostructures are further verified by measuring antigen–antibody interactions using bovine serum albumin (BSA) and anti-BSA. These rapid and high-throughput fabrication methods can benefit low-cost, highly sensitive biosensors and other sensing applications.

A label-free nanostructured plasmonic biosensor based on Blu-ray discs with integrated microfluidics for sensitive biodetection

Nanostructure-based plasmonic biosensors have quickly positioned themselves as interesting candidates for the design of portable optical biosensor platforms considering the potential benefits they can offer in integration, miniaturization, multiplexing, and real-time label-free detection. We have developed a simple integrated nanoplasmonic sensor taking advantage of the periodic nanostructured array of commercial Blu-ray discs. Sensors with two gold film thicknesses (50 and 100nm) were fabricated and optically characterized by varying the oblique-angle of the incident light in optical reflectance measurements. Contrary to the use normal light incidence previously reported with other optical discs, we observed an enhancement in sensitivity and a narrowing of the resonant linewidths as the light incidence angle was increased, which could be related to the generation of Fano resonant modes. The new sensors achieve a figure of merit (FOM) up to 35 RIU^-1 and a competitive bulk limit of detection (LOD) of 6.3×10^-6 RIU. These values significantly improve previously reported results obtained with normal light incidence reflectance measurements using similar structures. The sensor has been combined with versatile, simple, ease to-fabricate microfluidics. The integrated chip is only 1cm² (including a PDMS flow cell with a 50µm height microfluidic channel fabricated with double-sided adhesive tape) and all the optical components are mounted on a 10cm×10cm portable prototype, illustrating its facile miniaturization, integration and potential portability. Finally, to assess the label-free biosensing capability of the new sensor, we have evaluated the presence of specific antibodies against the GTF2b protein, a tumor-associate antigen (TAA) related to colorectal cancer. We have achieved a LOD in the pM order and have assessed the feasibility of directly measuring biological samples such as human serum.

Protein Trapping in Plasmonic Nanoslit and Nanoledge Cavities: The Behavior and Sensing

A novel plasmonic nanoledge device was presented to explore the geometry-induced trapping of nanoscale biomolecules and examine a generation of surface plasmon resonance (SPR) for plasmonic sensing. To design an optimal plasmonic device, a semianalytical model was implemented for a quantitative analysis of SPR under plane-wave illumination and a finite-difference time-domain (FDTD) simulation was used to study the optical transmission and refractive index (RI) sensitivity. In addition, total internal reflection fluorescence (TIRF) imaging was used to visualize the migration of fluorescently labeled bovine serum albumin (BSA) into the nanoslits; and fluorescence correlation spectroscopy (FCS) was further used to investigate the diffusion of BSA in the nanoslits. Transmission SPR measurements of free prostate specific antigen (f-PSA), which is similar in size to BSA, were performed to validate the trapping of the molecules via specific binding reactions in the nanoledge cavities. The present study may facilitate further development of single nanomolecule detection and new nanomicrofluidic arrays for effective detection of multiple biomarkers in clinical biofluids.

Coherent selection of invisible high-order electromagnetic excitations

Far-field spectroscopy and mapping of electromagnetic near-field distribution are the two dominant tools for analysis and characterization of the electromagnetic response in nanophotonics. Despite the widespread use, these methods can fail at identifying weak electromagnetic excitations masked by stronger neighboring excitations. This is particularly problematic in ultrafast nanophotonics, including optical sensing, nonlinear optics and nanolasers, where the broad resonant modes can overlap to a significant degree. Here, using plasmonic metamaterials, we demonstrate that coherent spectroscopy can conveniently isolate and detect such hidden high-order photonic excitations. Our results establish that the coherent spectroscopy is a powerful new tool. It complements the conventional methods for analysis of the electromagnetic response, and provides a new route to designing and characterizing novel photonic devices and materials.

Highly Sensitive Aluminum-Based Biosensors using Tailorable Fano Resonances in Capped Nanostructures

Metallic nanostructure-based surface plasmon sensors are capable of real-time, label-free, and multiplexed detections for chemical and biomedical applications. Recently, the studies of aluminum-based biosensors have attracted a large attention because aluminum is a more cost-effective metal and relatively stable. However, the intrinsic properties of aluminum, having a large imaginary part of the dielectric function and a longer evanescent length, limit its sensing capability. Here we show that capped aluminum nanoslits fabricated on plastic films using hot embossing lithography can provide tailorable Fano resonances. Changing height of nanostructures and deposited metal film thickness modulated the transmission spectrum, which varied from Wood’s anomaly-dominant resonance, asymmetric Fano profile to surface plasmon-dominant resonance. For biolayer detections, the maximum surface sensitivity occurred at the dip of asymmetric Fano profile. The optimal Fano factor was close to −1.3. The wavelength and intensity sensitivities for surface thickness were up to 2.58 nm/nm and 90%/nm, respectively. The limit of detection (LOD) of thickness reached 0.018 nm. We attributed the enhanced surface sensitivity for capped aluminum nanoslits to a reduced evanescent length and sharp slope of the asymmetric Fano profile. The protein-protein interaction experiments verified the high sensitivity of capped nanostructures. The LOD was down to 236 fg/mL.

Customizing plasmonic diffraction patterns by laser interference

This work reports a versatile and efficient production of periodic microstructures surrounded by metallic alloy nanoparticles supported on glass with customized visible diffraction patterns by using the technique of phase mask laser interference.

Engineering a Large Scale Indium Nanodot Array for Refractive Index Sensing

In this work, we developed a simple method to fabricate 12 × 4 mm² large scale nanostructure arrays and investigated the feasibility of indium nanodot (ND) array with different diameters and periods for refractive index sensing. Absorption resonances at multiple wavelengths from the visible to the near-infrared range were observed for various incident angles in a variety of media. Engineering the ND array with a centered square lattice, we successfully enhanced the sensitivity by 60% and improved the figure of merit (FOM) by 190%. The evolution of the resonance dips in the reflection spectra, of square lattice and centered square lattice, from air to water, matches well with the results of Lumerical FDTD simulation. The improvement of sensitivity is due to the enhancement of local electromagnetic field (E-field) near the NDs with centered square lattice, as revealed by E-field simulation at resonance wavelengths. The E-field is enhanced due to coupling between the two square ND arrays with [Formula: see text]x period at phase matching. This work illustrates an effective way to engineer and fabricate a refractive index sensor at a large scale. This is the first experimental demonstration of poor-metal (indium) nanostructure array for refractive index sensing. It also demonstrates a centered square lattice for higher sensitivity and as a better basic platform for more complex sensor designs.

Enhancing the Surface Sensitivity of Metallic Nanostructures Using Oblique-Angle-Induced Fano Resonances

Surface sensitivity is an important factor that determines the minimum amount of biomolecules detected by surface plasmon resonance (SPR) sensors. We propose the use of oblique-angle-induced Fano resonances caused by two-mode coupling or three-mode coupling between the localized SPR mode and long-range surface plasmon polariton modes to increase the surface sensitivities of silver capped nanoslits. The results indicate that the coupled resonance between the split SPR (−k_SPR) and cavity modes (two-mode coupling) has a high wavelength sensitivity for small-angle incidence (2°) due to its short decay length. Additionally, three-mode coupling between the split SPR (−k_SPR), substrate (+k_Sub) and cavity modes has a high intensity sensitivity for large-angle incidence due to its short decay length, large resonance slope and enhanced transmission intensity. Compared to the wavelength measurement, the intensity measurement has a lower detectable (surface) concentration below 1 ng/ml (0.14 pg/mm²) and is reduced by at least 3 orders of magnitude. In addition, based on the calibration curve and current system noise, a theoretical detection limit of 2.73 pg/ml (0.38 fg/mm²) can be achieved. Such a surface concentration is close to that of prism-based SPR with phase measurement (0.1–0.2 fg/mm² under a phase shift of 5 mdeg).

Sensitive surface plasmon resonance enabled by templated periodic arrays of gold nanodonuts

Here we report a simple and scalable colloidal lithography technology for fabricating periodic arrays of gold nanodonuts for sensitive surface plasmon resonance (SPR) analysis. This new bottom-up approach leverages a unique polymer wetting layer between a self-assembled, non-close-packed monolayer silica colloidal crystal and a silicon substrate to template ordered gold nanodonuts with tunable geometries over wafer-sized areas. The processes involved in this templating nanofabrication approach, including spin coating, oxygen plasma etching, and metal sputtering, are all compatible with standard microfabrication technologies. Specular reflection measurements reveal that the efficient electromagnetic coupling of the incident light with the tunable SPR modes of the templated gold nanodonut arrays enables good spectral tunability. Bulk refractive index sensing experiments show that a high SPR sensitivity of ∼758 nm per refractive index unit, which outperforms many plasmonic nanostructures fabricated by both top-down and bottom-up approaches, can be achieved using the templated gold nanodonut arrays. Numerical finite-difference time-domain simulations have also been performed to complement the optical characterization and the theoretical results match well with the experimental measurements.

Tunable nanoplasmonic sensor based on the asymmetric degree of Fano resonance in MDM waveguide

We first report a simple nanoplasmonic sensor for both universal and slow-light sensing in a Fano resonance-based waveguide system. A theoretical model based on the coupling of resonant modes is provided for the inside physics mechanism, which is supported by the numerical FDTD results. The revealed evolution of the sensing property shows that the Fano asymmetric factor p plays an important role in adjusting the FOM of sensor, and a maximum of ~4800 is obtained when p = 1. Finally, the slow-light sensing in such nanoplasmonic sensor is also investigated. It is found that the contradiction between the sensing width with slow-light (SWS) and the relevant sensitivity can be resolved by tuning the Fano asymmetric factor p and the quality factor of the superradiant mode. The presented theoretical model and the pronounced features of this simple nanoplasmonic sensor, such as the tunable sensing and convenient integration, have significant applications in integrated plasmonic devices.

A semi-analytical decomposition analysis of surface plasmon generation and the optimal nanoledge plasmonic device

Surface plasmon resonance (SPR) of nanostructured thin metal films (so-called nanoplasmonics) has attracted intense attention due to its versatility for optical sensing and chip-based device integration. Understanding the underlying physics and developing applications of nanoplasmonic devices with desirable optical properties, e.g. intensity of light scattering and high refractive index (RI) sensitivity at the perforated metal film, is crucial for practical uses in physics, biomedical detection, and environmental monitoring. This work presents a semi-analytical model that enables decomposition and quantitative analysis of surface plasmon generation at a new complex nanoledge aperture structure under plane-wave illumination, thus providing insight on how to optimize plasmonic devices for optimal plasmonic generation efficiencies and RI sensitivity. A factor analysis of parameters (geometric, dielectric-RI, and incident wavelength) relevant to surface plasmon generation is quantitatively investigated to predict the surface plasmon polariton (SPP) generation efficiency. In concert with the analytical treatment, a finite-difference time-domain (FDTD) simulation is used to model the optical transmission spectra and RI sensitivity as a function of the nanoledge device's geometric parameters, and it shows good agreement with the analytical model. Further validation of the analytical approach is provided by fabricating subwavelength nanoledge devices and testing their optical transmission and RI sensitivity.

Ultrafast direct fabrication of flexible substrate-supported designer plasmonic nanoarrays

Fabrication of plasmonic nanostructures has been an important topic for their potential applications in photonic and optoelectronic devices. Among plasmonic materials, gold is one of the most promising materials due to its low ohmic loss at optical frequencies and high oxidation resistance. However, there are two major bottlenecks for its industrial applications: (1) the need for large-scale fabrication technology for high-precision plasmonic nanostructures; and (2) the need to integrate the plasmonic nanostructures on various substrates. While conventional top-down approaches involve high cost and give low throughput, bottom-up approaches suffer from irreproducibility and low precision. Herein, we report laser shock induced direct imprinting of large-area plasmonic nanostructures from physical vapor deposited (PVD) gold thin film on a flexible commercial free-standing aluminum foil. Among the important characteristics of the laser-shock direct imprinting is their unique capabilities to reproducibly deliver designer plasmonic nanostructures with extreme precision and in an ultrafast manner. Excellent size tunability (from several μm down to 15 nm) has been achieved by varying mold dimensions and laser parameters. The physical mechanism of the hybrid film imprinting is elaborated by finite element modeling. A mechanical robustness test of the hybrid film validates a significantly improved interfacial contact between gold arrays and the underlying substrate. The strong optical field enhancement was realized in the large-area fabricated engineered gold nanostructures. Low concentration molecular sensing was investigated employing the fabricated structures as surface-enhanced Raman scattering (SERS) substrates. The ability to ultrafast direct imprint plasmonic nanoarrays on a flexible substrate at multiscale is a critical step towards roll-to-roll manufacturing of multi-functional devices which is poised to inspire several emerging applications.

A compact imaging spectroscopic system for biomolecular detections on plasmonic chips

In this study, we demonstrate a compact imaging spectroscopic system for high-throughput detection of biomolecular interactions on plasmonic chips, based on a curved grating as the key element of light diffraction and light focusing.