One-pot synthesis of intermetallic electrocatalysts in ordered, large-pore mesoporous carbon/silica toward formic acid oxidation

A Biphasic Strategy to Synergistically Accelerate Activation and CO Spillover in Formic Acid Oxidation Catalysis

Developing highly efficient and carbon monoxide (CO)-tolerant platinum (Pt) catalysts for the formic acid oxidation reaction (FAOR) is vital for direct formic acid fuel cells (DFAFCs), yet it is challenging due to the high energy barrier of direct intermediates (HCOO* and COOH*) as well as the CO poisoning issues associated with Pt alloy catalysts. Here we present a versatile biphasic strategy by creating a hexagonal/cubic crystalline-phase-synergistic PtPb/C (h/c-PtPb/C) catalyst to tackle the aforementioned issues. Detailed investigations reveal that h/c-PtPb/C can simultaneously facilitate the adsorption of direct intermediates while inhibiting CO adsorption, thereby significantly improving the activation and CO spillover. As a result, h/c-PtPb/C showcases an outstanding FAOR activity of 8.1 A mgPt-1, which is 64.5 times higher than that of commercial Pt/C and significantly surpasses monophasic PtPb. Moreover, the h/c-PtPb/C-based membrane electrode assembly exhibits an exceptional peak power density of 258.7 mW cm-2 for practical DFAFC applications.

Heterogeneous Catalysis in Production and Utilization of Formic Acid for Renewable Energy

As the cleanest energy source, hydrogen has been followed with interest by researchers around the world. However, due to the internal low density of hydrogen, it cannot be stored and used efficiently which limits the hydrogen application on a huge scale. Chemical hydrogen storage is considered as a useful method for efficient handling and storage. Due to its excellent safety, formic acid stands out. It is worth noting that the matter and energy conversion is established based on formic acid, which is not referred to in the previous documentation. In this review, the latest development of research on heterogeneous catalysis via production and application of formic acid for energy application is reported. The matter and energy conversion based on formic acid are both discussed systematically. More importantly, with formic acid as the node, biomass energy shows potential to be in a dominant position in the energy conversion process. In addition, the catalytic mechanism is also mentioned. This review can provide the current state in this field and the new inspirations for developing superior catalytic systems.

Advancements in Noble Metal-Decorated Porous Carbon Nanoarchitectures: Key Catalysts for Direct Liquid Fuel Cells

Noble-metal nanocrystals have emerged as essential electrode materials for catalytic oxidation of organic small molecule fuels in direct liquid fuel cells (DLFCs). However, for large-scale commercialization of DLFCs, adopting cost-effective techniques and optimizing their structures using advanced matrices are crucial. Notably, noble metal-decorated porous carbon nanoarchitectures exhibit exceptional electrocatalytic performances owing to their three-dimensional cross-linked porous networks, large accessible surface areas, homogeneous dispersion (of noble metals), reliable structural stability, and outstanding electrical conductivity. Consequently, they can be utilized to develop next-generation anode catalysts for DLFCs. Considering the recent expeditious advancements in this field, this comprehensive review provides an overview of the current progress in noble metal-decorated porous carbon nanoarchitectures. This paper meticulously outlines the associated synthetic strategies, precise microstructure regulation techniques, and their application in electrooxidation of small organic molecules. Furthermore, the review highlights the research challenges and future opportunities in this prospective research field, offering valuable insights for both researchers and industry experts.

Unusual Role of the Surfactant in the Self-Assembly of Pt Alloy in Ordered Mesoporous Carbon: Tuning the Nanocluster Size

In the one-step self-assembly synthesis of metallic nanocrystals in ordered mesoporous carbon (OMC), the surfactant functionalizes well as the structure directing agent and mesopore template. Interestingly, this work demonstrates another unusual role the surfactant plays: tuning the size of the nanocrystals. Our investigation shows that the decreasing molecular weight of the PS segment of PEO-b-PS leads to sequentially reduced PtRu particle sizes of 4.4, 3.9, and 2.9 nm, while F127 which has a distinctly smaller hydrophobic PO domain with a bending structure in the micelles successfully results in sub-2 nm PtM (M = Ru, Ir, Rh, Pd) nanoclusters in OMC. This well indicates that the nanocluster size is largely decided by the volume of the hydrophobic segment of the surfactant to which the metallic precursor is linked. The smaller the volume, the fewer the precursor molecules are adsorbed, and the smaller the alloy nanoclusters. In the electrocatalytic methanol oxidation reaction, the mass activity of PtRu-1.6/OMC with 1.6 nm PtRu clusters at 0.87 V reaches 1.07 A mg_Pt^-1, which is 2.9 times that of commercial PtRu/C with an average alloy size of 2.7 nm. In principle, a wide range of ultrafine metallic clusters embedded in OMC can be prepared via this route for various applications.

A General Concurrent Template Strategy for Ordered Mesoporous Intermetallic Nanoparticles with Controllable Catalytic Performance

We report a general concurrent template strategy for precise synthesis of mesoporous Pt-/Pd-based intermetallic nanoparticles with desired morphology and ordered mesostructure. The concurrent template not only supplies a mesoporous metal seed for re-crystallization growth of atomically ordered intermetallic phases with unique atomic stoichiometry but also provides a nanoconfinement environment for nanocasting synthesis of mesoporous nanoparticles with ordered mesostructure and rhombic dodecahedral morphology under elevated temperature. Using the selective hydrogenation of 3-nitrophenylacetylene as a proof-of-concept catalytic reaction, mesoporous intermetallic PtSn nanoparticles exhibited remarkably controllable intermetallic phase-dependent catalytic selectivity and excellent catalytic stability. This work provides a very powerful strategy for precise preparation of ordered mesoporous intermetallic nanocrystals for application in selective catalysis and fuel cell electrocatalysis.

Noble Metal Nanoparticles Decorated Metal Oxide Semiconducting Nanowire Arrays Interwoven into 3D Mesoporous Superstructures for Low-Temperature Gas Sensing

Mesoporous materials have been extensively studied for various applications due to their high specific surface areas and well-interconnected uniform nanopores. Great attention has been paid to synthesizing stable functional mesoporous metal oxides for catalysis, energy storage and conversion, chemical sensing, and so forth. Heteroatom doping and surface modification of metal oxides are typical routes to improve their performance. However, it still remains challenging to directly and conveniently synthesize mesoporous metal oxides with both a specific functionalized surface and heteroatom-doped framework. Here, we report a one-step multicomponent coassembly to synthesize Pt nanoparticle-decorated Si-doped WO₃ nanowires interwoven into 3D mesoporous superstructures (Pt/Si-WO₃ NWIMSs) by using amphiphilic poly(ethylene oxide)-block-polystyrene (PEO-b-PS), Keggin polyoxometalates (H₄SiW₁₂O₄₀) and hydrophobic (1,5-cyclooctadiene)dimethylplatinum(II) as the as structure-directing agent, tungsten precursor and platinum source, respectively. The Pt/Si-WO₃ NWIMSs exhibit a unique mesoporous structure consisting of 3D interwoven Si-doped WO₃ nanowires with surfaces homogeneously decorated by Pt nanoparticles. Because of the highly porous structure, excellent transport of carriers in nanowires, and rich WO₃/Pt active interfaces, the semiconductor gas sensors based on Pt/Si-WO₃ NWIMSs show excellent sensing properties toward ethanol at low temperature (100 °C) with high sensitivity (S = 93 vs 50 ppm), low detection limit (0.5 ppm), fast response-recovery speed (17-7 s), excellent selectivity, and long-term stability.

Pt3Sn nanoparticles enriched with SnO2/Pt3Sn interfaces for highly efficient alcohol electrooxidation

Pt₃Sn nanoparticles (NPs) enriched with Pt₃Sn/ultra-small SnO₂ interfaces (Pt₃Sn@u-SnO₂/NG) were synthesized through a thermal treatment of Pt₂Sn/NG in a H₂ atmosphere, followed by annealing under H₂ and air conditions. The unique structure of Pt₃Sn NPs enriched with Pt₃Sn/SnO₂ interfaces was observed on the Pt₃Sn@u-SnO₂/NG catalyst based on HRTEM. The optimized Pt₃Sn@u-SnO₂/NG catalyst achieves high catalytic activity with an ethanol oxidation reaction (EOR) activity of 366 mA mg_Pt ^-1 and a methanol oxidation reaction (MOR) activity of 503 mA mg_Pt ^-1 at the potential of 0.7 V, which are eight-fold and five-fold higher than those for the commercial Pt/C catalyst (44 and 99 mA mg_Pt ^-1, respectively). The Pt₃Sn@u-SnO₂/NG catalyst is found to be 3 times more stable and have higher CO tolerance than Pt/C. The outstanding performance of the Pt₃Sn@u-SnO₂/NG catalyst should be ascribed to the synergetic effect induced by the unique structure of Pt₃Sn NPs enriched with Pt₃Sn/SnO₂ interfaces. The synergetic effect between Pt₃Sn NPs and ultra-small SnO₂ increases the performance for alcohol oxidation because the Sn in both Pt₃Sn and SnO₂ favors the removal of CO_ads on the nearby Pt by providing OH_ads species at low potentials. The present work suggests that the Pt₃Sn@u-SnO₂ is indeed a unique kind of efficient electrocatalyst for alcohol electrooxidation.

Metal-incorporated mesoporous oxides: Synthesis and applications

Mesoporous oxides are outstanding metal nanoparticle catalyst supports owing to their well-defined porous structures. Such mesoporous architectures not only prevent the aggregation of metal nanoparticles but also enhance their catalytic performance. Metal/metal oxide heterojunctions exhibit unique chemical and physical properties because of the surface reconstruction around the junction and electron transfer/interaction across the interface. This article reviews the methods used for synthesizing metal-supported hybrid nanostructures and their applications as catalysts for environmental remediation and sensors for detecting hazardous materials.

Random alloy and intermetallic nanocatalysts in fuel cell reactions

Fuel cells that use small organic molecules or hydrogen as the anode fuel can power clean electric vehicles. From an experimental perspective, the possible fuel cells' electrocatalytic reaction mechanisms are obtained through in situ electrochemical spectroscopy techniques and density functional theory calculations, providing theoretical guidance for further development of novel nanocatalysts. As advanced nanocatalysts for fuel cells' electrochemical reactions, alloy nanomaterials have greatly improved electrocatalytic activity and stability and have attracted widespread attention. Enhanced electrocatalytic performance of alloy nanocatalysts could be closely related to the synergistic effects, such as electronic and strain effects. Depending on the arrangement of atoms, alloys can be classified into random alloy and intermetallic compounds (ordered structure). Intermetallic compounds generally have lower heats of formation and stronger heteroatomic bonding strength relative to the random alloy, resulting in high chemical and structural stability in either full pH solutions or electrochemical tests. Here, we summarize the latest advances and the structure-function relationship of noble metal alloy nanocatalysts, among which Pt-based catalysts are the main ones, as well as comprehensively understand why they significantly affect the electrocatalytic performance of fuel cells. Novel alloy nanocatalysts with a robust three-phase interface to achieve efficient charge and mass transfer can obtain desirable activity and stability in the electrochemical workstation tests, and is expected to acquire a higher power density on fuel cell test systems with harsh test conditions.

Pt Deposits on Bi/Pt NP Catalyst for Formic Acid Oxidation: Catalytic Enhancement and Longer Lifetime

This work presents an improvement in the activity and catalytic lifetime of Pt deposits on Bi-modified Pt nanoparticles (Bi/Pt NP) toward formic acid oxidation (FAO). Using an irreversible adsorption method, Bi was deposited on Pt NP to form Bi/Pt NP and sequentially Pt was deposited on Bi/Pt NP to form Pt/Bi/Pt NP. Voltammetric studies of Pt NP, Bi/Pt NP, and Pt/Bi/Pt NPs supported that Pt deposits of Pt/Bi/Pt NPs provided quite a unique behavior: simultaneous surface oxidation of deposited Pt and Bi and significant resistance to the oxidative removal of Bi. Furthermore, combined spectroscopic investigations revealed that the concentration of the employed Pt precursor ion solution determined the amount of deposited Pt from ∼0.2 to ∼0.4 in coverage. The best Pt/Bi/Pt NP catalyst with a Pt coverage of ∼0.25 enhanced the dehydrogenation processes below ∼0.4 V by a factor of more than 2 and increased the FAO current at ∼0.8 V roughly by 15 times, referring to those of Bi/Pt NP. The lifetime measurement works revealed that after the 1000th voltammetric cycle to 0.4 V, the FAO currents of Pt/Bi/Pt NPs were 2 and 4 times higher than those of Bi/Pt NP and Pt NP, respectively. The Pt deposits on Bi/Pt NP were concluded to play two roles in FAO: the promotion of FAO processes to increase the activity and the retardation of Bi oxidative removal to maintain the activity much longer.

Tunable Periodically Ordered Mesoporosity in Palladium Membranes Enables Exceptional Enhancement of Intrinsic Electrocatalytic Activity for Formic Acid Oxidation

Developing superior electrocatalysts for formic acid oxidation (FAO) is the most crucial step in commercializing direct formic acid fuel cells. Herein, we electrodeposited palladium membranes with periodically ordered mesoporosity obtained by asymmetrically replicating the bicontinuous cubic phase structure of a lyotropic liquid-crystal template. The Pd membrane with the largest periodicity and highest degree of order delivered up to 90.5 m²  g^-1 of electrochemical active surface area and 3.34 A mg^-1 electrocatalysis capability towards FAO, 3.8 and 7.8 times the values of the commercial Pd/C catalyst, respectively. By controlling the temperature and potential of the electrodeposition procedure, the periodicity area and order degree of the mesoporosity are highly tunable. These Pd membranes gave prototype formic acid fueled cells with 4.3 and 2.4 times the maximum current and power density of the commercial Pd/C catalyst.

Self-assembly of block copolymers towards mesoporous materials for energy storage and conversion systems

This paper reviews the progress in the field of block copolymer-templated mesoporous materials, including synthetic methods, morphological and pore size control and their potential applications in energy storage and conversion devices.

Structurally ordered PtSn intermetallic nanoparticles supported on ATO for efficient methanol oxidation reaction

The development of cost-effective methanol oxidation reaction (MOR) catalysts with a high activity and stability is highly desirable for direct methanol fuel cells. In this study, the structurally ordered PtSn intermetallic nanoparticles supported on Sb-doped SnO₂ (ATO) have been successfully synthesized in ethylene glycol (EG) solution at 200 °C. Pt NPs were firstly formed on ATO, followed by the transformation from Pt into hexagonal PtSn on the surface of ATO. The obtained structurally ordered PtSn intermetallic NPs supported on ATO demonstrate significantly enhanced MOR activity and durability in comparison with commercial Pt/C. Our PtSn intermetallic NPs supported on ATO show a MOR activity 4.1 times higher than that of commercial Pt/C catalysts. Accelerated durability tests indicate that the commercial Pt/C catalysts lose about 50% of their initial current density after 500 cycles while the Pt/ATO-200-3 h catalyst loses only about 15% of its initial current density. Our PtSn intermetallic NPs supported on ATO are also found to have higher CO tolerance than commercial Pt/C. This work demonstrates an important strategy to rationally design high-performance structurally ordered Pt-based intermetallic NP catalysts for fuel cells and other applications.

A General and Straightforward Route to Noble Metal-Decorated Mesoporous Transition-Metal Oxides with Enhanced Gas Sensing Performance

Controllable and efficient synthesis of noble metal/transition-metal oxide (TMO) composites with tailored nanostructures and precise components is essential for their application. Herein, a general mercaptosilane-assisted one-pot coassembly approach is developed to synthesize ordered mesoporous TMOs with agglomerated-free noble metal nanoparticles, including Au/WO₃ , Au/TiO₂ , Au/NbO_x , and Pt/WO₃ . 3-mercaptopropyl trimethoxysilane is applied as a bridge agent to cohydrolyze with metal oxide precursors by alkoxysilane moieties and interact with the noble metal source (e.g., HAuCl₄ and H₂ PtCl₄ ) by mercapto (SH) groups, resulting in coassembly with poly(ethylene oxide)-b-polystyrene. The noble metal decorated TMO materials exhibit highly ordered mesoporous structure, large pore size (≈14-20 nm), high specific surface area (61-138 m² g^-1 ), and highly dispersed noble metal (e.g., Au and Pt) nanoparticles. In the system of Au/WO₃ , in situ generated SiO₂ incorporation not only enhances their thermal stability but also induces the formation of ε-phase WO₃ promoting gas sensing performance. Owning to its specific compositions and structure, the gas sensor based on Au/WO₃ materials possess enhanced ethanol sensing performance with a good response (R_air /R_gas = 36-50 ppm of ethanol), high selectivity, and excellent low-concentration detection capability (down to 50 ppb) at low working temperature (200 °C).

CO Gas Induced Phase Separation in PtPb@Pt Catalyst and Formation of Ultrathin Pb Nanosheets Probed by In Situ Transmission Electron Microscopy

PtPb@Pt catalysts are very useful and widely applied in various industrial reactions. Here, the phase stability of such catalysts is compared in both CO gas and vacuum conditions at elevated temperatures using aberration-corrected in situ transmission electron microscopy (TEM). A Pt aggregation process takes place affected by CO gas, which results in direct exposure of the PtPb core to CO. A phase separation process, in which Pb atoms are stripped off the original PtPb@Pt nanoparticles, is unambiguously identified in CO gas. At initial stages, the as nucleated Pb islands are amorphous. Once the ultrathin Pb islands reach ≈3.5 nm or higher, they suddenly became crystalline. The interaction between Pb and CO gas stabilizes the ultrathin Pb nanosheets, resulting in the formation of a large quantity of Pb nanosheets and Pb-depleted PtPb_0.08 nanoparticles. In sharp contrast, when heated up in a vacuum, the PtPb@Pt catalyst remains intact. The results of this study shine light on the "toxic" effect of CO that results in failures of many Pt-based catalysts and discloses formation mechanism of ultrathin Pb nanosheets.

Intermetallic Nanoparticles: Synthetic Control and Their Enhanced Electrocatalysis

Intermetallic nanoparticles (NPs) described in this Account are a class of metallic alloy NPs within which metal atoms are bonded via strong d-orbital interaction and ordered anisotropically in a specific crystallographic direction. Compared to the common metallic alloy NPs with solid solution structure, intermetallic NPs are generally more stable against chemical oxidation and etching. The strict stoichiometry requirement, well-defined atom binding environment and layered atomic arrangement also make intermetallic NPs an ideal model for understanding their physical and catalytic properties. This account summarizes the synthetic principles and strategies developed to obtain monodisperse intermetallic NPs, especially tetragonal L1₀-NPs. The thermodynamics and kinetics involved in the conversion between disordered and ordered structures are briefly discussed. The synthetic methods are grouped into two slightly different categories: solution-phase synthesis followed by solid state annealing and direct solution-phase synthesis. In the former method, high-surface-area supports are often needed to disperse NPs and to prevent them from aggregation, while in the latter method such supports are not required since the structure conversion temperature is lowered to a level that the conversion can proceed in the solution reaction condition. In any of these two synthetic approaches, various factors influencing intermetallic structure formation should be carefully controlled to ensure more complete structural transition within NPs. Using representative synthetic examples, we highlight the strategies explored to facilitate the formation of intermetallic structure, including the introduction of vacancies/defects within NP structures and the control of atom addition rate/seed-mediated diffusion to lower the energy barrier. These strategies illustrate how the concept of thermodynamics and kinetics can be used to design the synthesis of intermetallic NPs. Additionally, to correlate NP structure and catalysis, we introduce briefly the d-band theory to explain how the electronic, strain and ensemble effects can be used to tune NP catalysis. We focus specifically on Pt-, Pd-, and Au-based L1₀-NPs and demonstrate how these L1₀-NPs could be prepared to show much enhanced catalysis for electrochemical reactions, including oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), formic acid oxidation reaction (FAOR), and thermo-oxidation reaction of CO. Due to the enhanced metal atom stability in the "sandwich"-type structure, the roles of the first-row transition metal atoms in catalysis are better understood to achieve catalysis optimization. This concept can be extended to other alloy NPs, demonstrating great potentials in using intermetallic structures to control NP reduction and oxidation catalysis for important chemical and energy applications.

Intermetallic Nanocrystals: Syntheses and Catalytic Applications

At the forefront of nanochemistry, there exists a research endeavor centered around intermetallic nanocrystals, which are unique in terms of long-range atomic ordering, well-defined stoichiometry, and controlled crystal structure. In contrast to alloy nanocrystals with no elemental ordering, it is challenging to synthesize intermetallic nanocrystals with a tight control over their size and shape. Here, recent progress in the synthesis of intermetallic nanocrystals with controllable sizes and well-defined shapes is highlighted. A simple analysis and some insights key to the selection of experimental conditions for generating intermetallic nanocrystals are presented, followed by examples to highlight the viable use of intermetallic nanocrystals as electrocatalysts or catalysts for various reactions, with a focus on the enhanced performance relative to their alloy counterparts that lack elemental ordering. Within the conclusion, perspectives on future developments in the context of synthetic control, structure-property relationships, and applications are discussed.

A Pd nanocatalyst supported on multifaceted mesoporous silica with enhanced activity and stability for glycerol electrooxidation

The current density of glycerol electrooxidation on Pd/SiO₂reached twice the values found for Pd/C. Mesosporous silica support works as a trap that confines the reactant.

Nanopatterned L10-FePt nanoparticles from single-source metallopolymer precursors for potential application in ferromagnetic bit-patterned media magnetic recording

A new single-source metallopolymer precursor P was applied for the synthesis of magnetic FePt nanoparticles, which was also suitable for patterning by high-throughput nanoimprint lithography to obtain ferromagnetic nanolines.

Direct access to aggregation-free and small intermetallic nanoparticles in ordered, large-pore mesoporous carbon for an electrocatalyst

Small-sized intermetallic catalysts are synthesized by block copolymer-assisted evaporation-induced self-assembly, incorporating an agent that interacts strongly with metal.

Pt/Ni(OH)2-NiOOH/Pd multi-walled hollow nanorod arrays as superior electrocatalysts for formic acid electrooxidation

The catalytic activity and durability are crucial for the development of high-performance electrocatalysts. To design electrocatalysts with excellent electroactivity and durability, the structure and composition are two important guiding principles. In this work, novel Pt/Ni(OH)2-NiOOH/Pd multi-walled hollow nanorod arrays (MHNRAs) are successfully synthesized. The unique MHNRAs provide fast transport and short diffusion paths for electroactive species and high utilization rate of catalysts. Because of the special surface and synergistic effects, the Pt/Ni(OH)2-NiOOH/Pd MHNRA electrocatalysts exhibit high catalytic activity, high durability and superior CO poisoning tolerance for the electrooxidation of formic acid in comparison with Pt@Pd MHNRAs, commercial Pt/C, Pd/C and PtRu/C catalysts.

Advanced hybrid supercapacitor based on a mesoporous niobium pentoxide/carbon as high-performance anode

Recently, hybrid supercapacitors (HSCs), which combine the use of battery and supercapacitor, have been extensively studied in order to satisfy increasing demands for large energy density and high power capability in energy-storage devices. For this purpose, the requirement for anode materials that provide enhanced charge storage sites (high capacity) and accommodate fast charge transport (high rate capability) has increased. Herein, therefore, a preparation of nanocomposite as anode material is presented and an advanced HSC using it is thoroughly analyzed. The HSC comprises a mesoporous Nb2O5/carbon (m-Nb2O5-C) nanocomposite anode synthesized by a simple one-pot method using a block copolymer assisted self-assembly and commercial activated carbon (MSP-20) cathode under organic electrolyte. The m-Nb2O5-C anode provides high specific capacity with outstanding rate performance and cyclability, mainly stemming from its enhanced pseudocapacitive behavior through introduction of a carbon-coated mesostructure within a voltage range from 3.0 to 1.1 V (vs Li/Li(+)). The HSC using the m-Nb2O5-C anode and MSP-20 cathode exhibits excellent energy and power densities (74 W h kg(-1) and 18,510 W kg(-1)), with advanced cycle life (capacity retention: ∼90% at 1000 mA g(-1) after 1000 cycles) within potential range from 1.0 to 3.5 V. In particular, we note that the highest power density (18,510 W kg(-1)) of HSC is achieved at 15 W h kg(-1), which is the highest level among similar HSC systems previously reported. With further study, the HSCs developed in this work could be a next-generation energy-storage device, bridging the performance gap between conventional batteries and supercapacitors.

Structural transformation of carbon-supported Pt₃Cr nanoparticles from a disordered to an ordered phase as a durable oxygen reduction electrocatalyst

The sluggish oxygen reduction kinetics and insufficient durability of cathode catalysts restrict the practical application of proton exchange membrane fuel cells. This study focuses on the structural transformation of carbon-supported Pt₃Cr from a disordered to an ordered phase and on the effect of such structural transformation on oxygen reduction reaction (ORR) activity and durability. X-ray diffraction and transmission electron microscopy results confirm the formation of carbon-supported Pt₃Cr intermetallic nanoparticles with a mean particle size of ca. 7.2 nm. Line scanning EDX reveals that the practical Pt-Cr atomic ratio is approximately 3 : 1. X-ray photoelectron spectroscopy results indicate that the proportion of metallic Pt increases while the binding energy of Pt 4f decreases with such structural transformation. The Pt₃Cr/C intermetallic nanoparticles exhibit enhanced mass and specific activities toward the ORR compared with commercial Pt/C but slightly lower mass activity than the disordered Pt₃Cr/C alloy nanoparticles. After the accelerated durability test for 5000 cycles, the Pt₃Cr intermetallic nanoparticles displayed negligible decay in ORR mass activity; however the ORR mass activity on the isordered Pt₃Cr alloy decreases to ca. 50%. Much enhanced durability of the Pt₃Cr/C intermetallic nanoparticles toward the ORR is definitely caused by the much higher structural and compositional stabilities of the Pt₃Cr/C intermetallic nanoparticles than that of the disordered Pt3Cr/C alloy nanoparticles, suggesting that the Pt₃Cr intermetallic nanoparticles may serve as highly active and durable ORR electrocatalysts for practical application.

Ordered mesoporous carbon electrodes for Li-O2 batteries

Ordered mesoporous carbon (OMC) with highly ordered pore channels was applied as an oxygen-side electrode for a Li-O2 battery. To evaluate the effect of the pore channel size on battery performance, we employed OMCs possessing two different pore sizes (6 and 17 nm). When cycled at a current density of 200 mA g(-1)carbon, the OMC electrodes reduced polarization in the oxygen evolution reaction by 0.1 V compared to those consisting of conventional super P carbon electrode. X-ray diffraction and transmission electron microscopy of the discharged oxygen electrodes provided evidence for the formation of amorphous Li2O2, a product of the oxygen reduction reaction, inside the OMC pores rather than on the electrode surface as in the case of the super P electrode. The OMC electrodes were also effective at high current densities (500 mA g(-1)carbon and 1000 mA g(-1)carbon).

Functional mesoporous materials for energy applications: solar cells, fuel cells, and batteries

This feature article presents recent progress made in the synthesis of functional ordered mesoporous materials and their application as high performance electrodes in dye-sensitized solar cells (DSCs) and quantum dot-sensitized solar cells (QDSCs), fuel cells, and Li-ion batteries. Ordered mesoporous materials have been mainly synthesized using two representative synthetic methods: the soft template and hard template methods. To overcome the limitations of these two methods, a new method called CASH was suggested. The CASH method combines the advantages of the soft and hard template methods by employing a diblock copolymer, PI-b-PEO, which contains a hydrophilic block and an sp(2)-hybridized-carbon-containing hydrophobic block as a structure-directing agent. After discussing general techniques used in the synthesis of mesoporous materials, this article presents recent applications of mesoporous materials as electrodes in DSCs and QDSCs, fuel cells, and Li-ion batteries. The role of material properties and mesostructures in device performance is discussed in each case. The developed soft and hard template methods, along with the CASH method, allow control of the pore size, wall composition, and pore structure, providing insight into material design and optimization for better electrode performances in these types of energy conversion devices. This paper concludes with an outlook on future research directions to enable breakthroughs and overcome current limitations in this field.

One-pot synthesis of tin-embedded carbon/silica nanocomposites for anode materials in lithium-ion batteries

We report a facile "one-pot" method for the synthesis of Sn-embedded carbon-silica (CS) mesostructured (nanostructured) composites through the selective interaction of resol (carbon precursor), tetraethylorthosilicate (TEOS), and tributylphenyltin (Sn precursor) with an amphiphilic diblock copolymer, poly(ethylene oxide-b-styrene), PEO-b-PS. A unique morphology transition from Sn nanowires to spherical Sn nanoparticles embedded in CS framework has been obtained. Metallic Sn species are homogeneously embedded in a rigid CS framework and are effectively confined within the nanostructures. The resulting composites are used as anode materials for lithium-ion batteries and exhibit high specific capacities (600 mA h g⁻¹ at a current density of 45 mA g⁻¹, and 440 mA h g⁻¹ at a current density of 300 mA g⁻¹) and an excellent cyclability of over 100 cycles with high Coulombic efficiency. Most of all, the novel method developed in this work for synthesizing functional hybrid materials can be extended to the preparation of various functional nanocomposites owing to its versatility and facileness.