Highly robust, recyclable displacement assay for mercuric ions in aqueous solutions and living cells

SERS Platform for Integrated Enrichment, Isolation, and Identification of Multiple Respiratory Viruses in a Single Assay Using 3D Stereoscopic SERS Tags and Flocked Swabs

Influenza (flu) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) exhibit similar clinical symptoms, complicating the diagnosis and clinical management of these critical respiratory infections. Thus, there is an urgent need for rapid on-site detection technologies that can simultaneously detect SARS-CoV-2 and influenza A viruses. Here, we have developed the first platform that combines in situ sampling with immune swabs and multichannel surface-enhanced Raman spectroscopy (SERS) for simultaneous screening of these two respiratory viruses in a single assay. A seed-mediated growth method was used to assemble a number of silver spheres on the surface of Fe3O4@SiO2 spheres, which not only creates extensive Raman hotspots but also provides numerous sites for Raman signaling molecules, enhancing the sensing sensitivity. Integrating two specific Raman signaling molecules into the nanospheres allows for the parallel detection of both viruses, improving the efficiency of SERS signal read-out. Rapid quantitative screening of both SARS-CoV-2 and H1N1 is achievable within 15 min, with detection limits of 7.76, and 8.13 pg·mL-1 for their respective target proteins. The platform demonstrated excellent performance in testing and analyzing 98 clinical samples (SARS-CoV-2:50; influenza A:48), achieving sensitivities of 88.00, and 95.83% for SARS-CoV-2 and influenza A, respectively. Pearson's correlation analysis revealed a significant correlation with the clinical CT values (P < 0.0001), underscoring the great potential of this platform for the early, rapid, and simultaneous diagnostic discrimination of multiple pathogens.

A Critical Review on the Development of Optical Sensors for the Determination of Heavy Metals in Water Samples. The Case of Mercury(II) Ion

Recent publications are reviewed concerning the development of sensors for the determination of mercury in drinking water, based on spectroscopic methodologies. A critical analysis is made of the specific details and figures of merit of the developed protocols. Special emphasis is directed to the validation and applicability to real samples in the usual concentration range of mercury, considering the maximum allowed limits in drinking water established by international regulations. It was found that while most publications describe in detail the synthesis, structure, and physicochemical properties of the sensing phases, they do not follow the state of the art in the analytical developments. Recommendations are provided regarding the proper method development and validation, including the setting of the calibration concentration range, the correct estimation of the limits of detection and quantitation, the concentration levels to be set for producing spiked water samples, the number of real samples for adequate validation, the comparison of the developed method with a reference technique, and other analytical features which should be followed.

Detection and imaging of Hg(II) in vivo using glutathione-functionalized gold nanoparticles

The optical and biological properties of functionalized gold nanoparticles (GNPs) have been widely used in sensing applications. GNPs have a strong binding ability to thiol groups. Furthermore, thiols are used to bind functional molecules, which can then be used, for example, to detect metal ions in solution. Herein, we describe 13 nm GNPs functionalized by glutathione (GSH) and conjugated with a rhodamine 6G derivative (Rh6G2), which can be used to detect Hg(II) in cells. The detection of Hg²⁺ ions is based on an ion-catalyzed hydrolysis of the spirolactam ring of Rh6G2, leading to a significant change in the fluorescence of GNPs-GSH-Rh6G2 from an "OFF" to an "ON" state. This strategy is an effective tool to detect Hg²⁺ ions. In cytotoxicity experiments, GNPs-GSH-Rh6G2 could penetrate living cells and detect mercury ions through the fluorescent "ON" form.

Single-particle study: effects of mercury amalgamation on morphological and spectral changes in anisotropic gold nanorods

This study investigated the amalgamation of gold nanorods (AuNRs) exposed to Hg(II) solution and its effects on structural and spectral changes in single AuNRs using scanning electron microscopy and total internal reflection scattering microscopy. First, Hg adsorption on AuNR surfaces formed AuNRs@Hg core-shell structures. Afterwards, they transformed to AuNRs@AuHg alloy shell structures in air due to the slow inward diffusion of Hg over time. The aspect ratio (AR) of the AuNRs@AuHg formed by the amalgamation was significantly decreased compared to that of bare AuNRs. Furthermore, the Hg coating on AuNRs induced a dramatic blue shift of the localized surface plasmon resonance (LSPR) peak and linewidth broadening, followed by a red shift and linewidth narrowing of the LSPR peak due to inward diffusion of Hg into the AuNR core. Finally, we investigated the effects of oxygen plasma treatment on the structural changes of AuNRs@AuHg and found that their AR was a decreasing function of the plasma treatment time. More notably, a major structural change was observed 5 min after the plasma treatment. Therefore, fundamental information on the relationship among amalgamation process, plasma treatment time, structural change, and LSPR peak and linewidth is provided at the single-particle level.

Modulating the catalytic activity of gold nanoparticles using amine-terminated ligands

Nanozymes have broad applications in theranostics and point-of-care tests. To enhance the catalytic activity of nanozymes, the conventional strategy is doping metals to form highly active nanoalloys. However, high-quality and stable nanoalloys are hard to synthesize. Ligand modification is a powerful strategy to achieve chemoselectivity or bioactivity by changing the surface chemistry. Here, we explore different ligands to enhance the catalytic activity of nanozymes, e.g., gold nanoparticles (AuNPs). We systematically studied the impacts on the enzymatic activity of AuNPs by ligand engineering of surface chemistry (charge, group, and surface distance). Our work established critical guidelines for surface modification of nanozymes. The amine group favors higher activity of AuNPs than other groups. The flexible amine-rich ligand enhances the catalytic activity of AuNPs in contrast to other ligands and unmodified AuNPs. Using a proof-of-concept model, we screened many candidate ligands to obtain polyamine-AuNPs, which have strongly enhanced peroxidase-like activity and 100 times enhanced sensitivity compared to unmodified AuNPs. The strategy of enhancing the catalytic activity of AuNPs using ligands will facilitate the catalysis-related applications of nanozymes in biology and diagnostics.

Surface ligand engineering can precisely modulate the catalytic activity of nanozymes from inactive to highly active.

Preparation, Functionalization, Modification, and Applications of Nanostructured Gold: A Critical Review

Gold nanoparticles (Au NPs) play a significant role in science and technology because of their unique size, shape, properties and broad range of potential applications. This review focuses on the various approaches employed for the synthesis, modification and functionalization of nanostructured Au. The potential catalytic applications and their enhancement upon modification of Au nanostructures have also been discussed in detail. The present analysis also offers brief summaries of the major Au nanomaterials synthetic procedures, such as hydrothermal, solvothermal, sol-gel, direct oxidation, chemical vapor deposition, sonochemical deposition, electrochemical deposition, microwave and laser pyrolysis. Among the various strategies used for improving the catalytic performance of nanostructured Au, the modification and functionalization of nanostructured Au produced better results. Therefore, various synthesis, modification and functionalization methods employed for better catalytic outcomes of nanostructured Au have been summarized in this review.

Aggregation-Induced Plasmon Coupling-Enhanced One- and Two-Photon Excitation Fluorescence by Silver Nanoparticles

Plasmon coupling-induced intense local electrical field in the gap of closely packed metal nanoparticles (NPs) has been known capable of significantly enhancing optical properties of chromophores. Here, we have investigated aggregation-induced plasmon coupling-enhanced one-photon excitation (1PE) and two-photon excitation (2PE) fluorescence of dyes using Ag NPs of three different sizes (20, 36, and 48 nm). The fluorescence of a model dye, Rhodamine B isothiocyanate (RiTC), was prequenched by attaching to Ag NPs and subsequently enhanced upon forming aggregates of Ag NPs. It was found that aggregates of larger sized Ag NPs gave larger 1PE and 2PE fluorescence enhancement on the basis of free dyes, while aggregates of smaller counterparts displayed larger enhancement on the basis of the corresponding prequenched ones. 1PE and 2PE fluorescence were enhanced by 2.5- and 10.2-fold by aggregated 48 nm Ag NPs compared to free dyes and by 8.0- and 22.5-fold by aggregated 20 nm Ag NPs compared to the quenched ones, respectively. This scheme achieved fluorescence enhancement significantly beyond the level of fluorescence recovery, much larger than conventional turn-on fluorescence probes, which is attractive for developing sensitive fluorescence turn-on-based detection with reduced background.

Surface chemistry of gold nanoparticles for health-related applications

Functionalization of gold nanoparticles is crucial for the effective utilization of these materials in health-related applications. Health-related applications of gold nanoparticles rely on the physical and chemical reactions between molecules and gold nanoparticles. Surface chemistry can precisely control and tailor the surface properties of gold nanoparticles to meet the needs of applications. Gold nanoparticles have unique physical and chemical properties, and have been used in a broad range of applications from prophylaxis to diagnosis and treatment. The surface chemistry of gold nanoparticles plays a crucial role in all of these applications. This minireview summarizes these applications from the perspective of surface chemistry and explores how surface chemistry improves and imparts new properties to gold nanoparticles for these applications.

Plasmonic nanoprobes based on the shape transition of Au/Ag core–shell nanorods to dumbbells for sensitive Hg-ion detection

Sensitive plasmonic nanoprobes for the sensitive detection of mercury ions based on a “rod-like to dumbbell or not” morphology transition of the Au/Ag core–shell hybrid nanorods.

Hydrogels Incorporating Au@Polydopamine Nanoparticles: Robust Performance for Optical Sensing

Stimuli-responsive hydrogels (SRhG) that undergo response to physicochemical stimuli have been broadly applied in separation, biosensing, and drug delivery. Since, most of the SRhG are based on the structural behaviors (swelling or collapse). Herein, we describe a more simple and convenient colorimetric SRhG of polydopamine-coated gold nanoparticles (Au@PDA NPs) hydrogel. The newly developed SRhG is based on the in situ surface chemistry of Au@PDA NPs with core-shell structure embedding in agarose hydrogel. Silver ions can in situ form Ag NPs on surfaces of Au@PDA NPs (Ag_Au@PDA NPs with core-satellites like structure) at ambient conditions, which shift the localized surface plasmon resonance (LSPR) absorption peak and result in color change. The solid sensing phase of SRhG shows greatly improved stability and anti-interference ability comparing to that of solution phase sensing. With rational designs, Au@PDA NPs hydrogel shows great potential in optical sensing, for example, biothiol detection, and coupled with enzyme-cascade reaction for acetylcholinesterase activity detection and inhibitor assays with excellent sensitivity and selectivity.

Ag+ -Gated Surface Chemistry of Gold Nanoparticles and Colorimetric Detection of Acetylcholinesterase

Chemical regulation of enzyme-mimic activity of nanomaterials is challenging because it requires a precise understanding of the surface chemistry and mechanism, and rationally designed applications. Herein, Ag+ -gated peroxidase activity is demonstrated by successfully modulating surface chemistry of cetyltrimethylammonium bromide-capped gold nanoparticles (CTAB-AuNPs). A surface blocking effect of long-chain molecules on surfaces of AuNPs that inhibit peroxidase activity of AuNPs is found. Ag+ ions can selectively bind on the surfaces of AuNPs and competitively destroy CTAB membrane forming Ag+ @CTAB-AuNPs complexes to result in enhanced peroxidase activity. Ag+ @CTAB-AuNPs show the highest peroxidase activity compared to similar-sized citrate-capped and ascorbic acid-capped AuNPs. Ag+ @CTAB-AuNPs can potentially develop into analyte-responsive systems and exhibit advantages in the optical sensing field. For example, the Ag+ @CTAB-AuNPs system shows an enhanced sensitivity and selectivity for acetylcholinesterase activity sensing compared to other methods.

Analyte-triggered autocatalytic amplification combined with gold nanoparticle probes for colorimetric detection of heavy-metal ions

This work reports a new colorimetric nanosensor for the detection of heavy-metal ions that initially integrates analyte-triggered autocatalytic amplification with o-phenylenediamine-mediated aggregation of label-free gold nanoparticles. Its utility is well demonstrated with the simple, rapid, sensitive, and specific detection of Hg²⁺, Cu²⁺, and Ag⁺ targets with detection limits less than 3 nM.

Radial Flow Assay Using Gold Nanoparticles and Rolling Circle Amplification to Detect Mercuric Ions

A novel colorimetric assay employing oligonucleotide-conjugated gold nanoparticle (AuNP probes) and rolling circle amplification (RCA) was developed for simple detection of mercuric ions (Hg²⁺). The thymine-Hg²⁺-thymine (T-Hg²⁺-T) coordination chemistry makes our detection system selective for Hg²⁺. In the presence of Hg²⁺, the thymine 12-mer oligonucleotide is unable to act as a primer for RCA due to the formation of T-Hg²⁺-T before the RCA reaction. However, in the absence of Hg²⁺, DNA coils as RCA products are generated during the RCA reaction, and is further labeled with AuNP probes. Colorimetric signals that depend on the amount of DNA coil-AuNP probe complexes were generated by drop-drying the reaction solution on nitrocellulose-based paper. As the reaction solution spread radially because of capillary action, the complexes formed a concentric red spot on the paper. The colorimetric signals of the red spots were rapidly measured with a portable spectrophotometer and determined as the ΔE value, which indicates the calculated color intensity. Our assay displays great linearity (detection limit: 22.4 nM), precision, and reproducibility, thus demonstrating its utility for Hg²⁺ quantification in real samples. We suggest that our simple, portable, and cost-effective method could be used for on-site Hg²⁺ detections.

Energy transfer-based biodetection using optical nanomaterials

This review focuses on recent progress in the development of FRET probes and the applications of FRET-based sensing systems.

Surface Modification of Gold Nanoparticles with Small Molecules for Biochemical Analysis

As one of the major tools for and by chemical science, biochemical analysis is becoming increasingly important in fields like clinical diagnosis, food safety, environmental monitoring, and the development of chemistry and biochemistry. The advancement of nanotechnology boosts the development of analytical chemistry, particularly the nanoparticle (NP)-based approaches for biochemical assays. Functional NPs can greatly improve the performance of biochemical analysis because they can accelerate signal transduction, enhance the signal intensity, and enable convenient signal readout due to their unique physical and chemical properties. Surface chemistry is a widely used tool to functionalize NPs, and the strategy for surface modification is of great significance to the application of NP-mediated biochemical assays. Surface chemistry not only affects the quality of NPs (stability, monodispersity, and biocompatibility) but also provides functional groups (-COO^-, -NH₃⁺, -CHO, and so on) or charges that can be exploited for bioconjugation or ligand exchange. Surface chemistry also dictates the sensitivity and specificity of the NP-mediated biochemical assays, since it is vital to the orientation, accessibility, and bioactivity of the functionalized ligands on the NPs. In this Account, we will focus on surface chemistry for functionalization of gold nanoparticles (AuNPs) with small organic molecules for biochemical analysis. Compared to other NPs, AuNPs have many merits including controllable synthesis, easy surface modification and high molar absorption coefficient, making them ideal probes for biochemical assays. Small-molecule functionalized AuNPs are widely employed to develop sensors for biochemical analysis, considering that small molecules, such as amino acids and sulfhydryl compounds, are more easily and controllably bioconjugated to the surface of AuNPs than biomacromolecules due to their less complex structure and steric hindrance. The orientation and accessibility of small molecules on AuNPs in most cases can be precisely controlled without compromising their bioactivity as well, thus ensuring the performance, such as the specificity and sensitivity, of AuNP-based biochemical assays. This Account reviews recent progress in the surface chemistry of functionalized AuNPs for biochemical assays. The surface chemistries mainly include click chemistry, ligand exchange reaction, and coordination-based recognition. These surface-modified AuNPs allow for assaying a range of important biochemical markers including metal ions, small biomolecules, enzymes, and antigens and antibodies. Applications of these systems range from environmental monitoring to medical diagnostics. This Account highlights the advantages and limitations (sensitivity, detection efficiency, and stability) that AuNP-mediated assays still have compared with conventional analytical methods. This Account also discusses the future research directions of surface-modified AuNP-mediated biochemical analysis. The main aim of this Account is to summarize the current surface modification strategies for AuNPs and further demonstrate how to make use of surface modification strategies to effectively improve the performance of AuNP-mediated analytical methods for a wide variety of applications relating to biochemical analysis.

Plasmonically Engineered Nanoprobes for Biomedical Applications

The localized surface plasmon resonance of metal nanoparticles is the collective oscillation of electrons on particle surface, induced by incident light, and is a particle composition-, morphology-, and coupling-dependent property. Plasmonic engineering deals with highly precise formation of the targeted nanostructures with targeted plasmonic properties (e.g., electromagnetic field distribution and enhancement) via controlled synthetic, assembling, and atomic/molecular tuning strategies. These plasmonically engineered nanoprobes (PENs) have a variety of unique and beneficial physical, chemical, and biological properties, including optical signal enhancement, catalytic, and local temperature-tuning photothermal properties. In particular, for biomedical applications, there are many useful properties from PENs including LSPR-based sensing, surface-enhanced Raman scattering, metal-enhanced fluorescence, dark-field light-scattering, metal-mediated fluorescence resonance energy transfer, photothermal effect, photodynamic effect, photoacoustic effect, and plasmon-induced circular dichroism. These properties can be utilized for the development of new biotechnologies and biosensing, bioimaging, therapeutic, and theranostic applications in medicine. This Perspective introduces the concept of plasmonic engineering in designing and synthesizing PENs for biomedical applications, gives recent examples of biomedically functional PENs, and discusses the issues and future prospects of PENs for practical applications in bioscience, biotechnology, and medicine.

A Simple Paper-Based Colorimetric Device for Rapid Mercury(II) Assay

Contamination of the environment by mercury(II) ions (Hg(2+)) poses a serious threat to human health and ecosystems. Up to now, many reported Hg(2+) sensors require complex procedures, long measurement times and sophisticated instrumentation. We have developed a simple, rapid, low cost and naked-eye quantitative method for Hg(2+) environmental analysis using a paper-based colorimetric device (PCD). The sample solution to which platinum nanoparticles (PtNPs) have been added is dispensed to the detection zone on the PCD, where the 3,3,5,5-tetramethylbenzidine (TMB) substrate has been pre-loaded. The PtNPs effect a rapid oxidization of TMB, inducing blue colorization on the PCD. However, Hg(2+) in the solution rapidly interact with the PtNPs, suppressing the oxidation capacity and hence causing a decrease in blue intensity, which can be observed directly by the naked eye. Moreover, Hg(2+) at concentrations as low as 0.01 uM, can be successfully monitored using a fiber optic device, which gives a digital readout proportional to the intensity of the blue color change. This paper-based colorimetric device (PCD) shows great potential for field measurement of Hg(2+).

Fluorescent nanoprobes for sensing and imaging of metal ions: recent advances and future perspectives

Recent advances in nanoscale science and technology have generated nanomaterials with unique optical properties. Over the past decade, numerous fluorescent nanoprobes have been developed for highly sensitive and selective sensing and imaging of metal ions, both in vitro and in vivo. In this review, we provide an overview of the recent development of the design and optical properties of the different classes of fluorescent nanoprobes based on noble metal nanomaterials, upconversion nanoparticles, semiconductor quantum dots, and carbon-based nanomaterials. We further detail their application in the detection and quantification of metal ions for environmental monitoring, food safety, medical diagnostics, as well as their use in biomedical imaging in living cells and animals.

Gold nanoparticle-catalyzed uranine reduction for signal amplification in fluorescent assays for melamine and aflatoxin B1

A multifunctional fluorescence platform has been constructed based on gold nanoparticle (AuNP)-catalyzed uranine reduction. The catalytic reduction of uranine was conducted in aqueous solution using AuNPs as nanocatalyst and sodium borohydride as reducing reagent, which was monitored by fluorescence and UV-vis spectroscopy. The reaction rate was highly dependent on the concentration, size and dispersion state of AuNPs. When AuNPs aggregated, their catalytic ability decreased, and thereby a label-free fluorescent assay was developed for the detection of melamine, which can be used for melamine determination in milk. In addition, a fluorescent immunoassay for aflatoxin B1 (AFB1) was established using the catalytic reaction for signal amplification based on target-induced concentration change of AuNPs, where AFB1-BSA-coated magnetic beads and anti-AFB1 antibody-conjugated AuNPs were employed as capture and signal probe, respectively. The detection can be accomplished in 1 h and acceptable recoveries in spiked maize samples were achieved. The developed fluorescence system is simple, sensitive and specific, which could be used for the detection of a wide range of analytes.

Lighting up the gold nanoparticles quenched fluorescence by silver nanoparticles: a separation distance study

Fluorescence intensity of a pre-quenched fluorophore was enhanced by over 100-fold through plasmon coupling interactions, even brighter than unquenched ones.

Nanoscopic optical rulers beyond the FRET distance limit: fundamentals and applications

In the last few decades, Förster resonance energy transfer (FRET) based spectroscopy rulers have served as a key tool for the understanding of chemical and biochemical processes, even at the single molecule level. Since the FRET process originates from dipole-dipole interactions, the length scale of a FRET ruler is limited to a maximum of 10 nm. Recently, scientists have reported a nanomaterial based long-range optical ruler, where one can overcome the FRET optical ruler distance dependence limit, and which can be very useful for monitoring biological processes that occur across a greater distance than the 10 nm scale. Advancement of nanoscopic long range optical rulers in the last ten years indicate that, in addition to their long-range capability, their brightness, long lifetime, lack of blinking, and chemical stability make nanoparticle based rulers a good choice for long range optical probes. The current review discusses the basic concepts and unique light-focusing properties of plasmonic nanoparticles which are useful in the development of long range one dimensional to three dimensional optical rulers. In addition, to provide the readers with an overview of the exciting opportunities within this field, this review discusses the applications of long range rulers for monitoring biological and chemical processes. At the end, we conclude by speculating on the role of long range optical rulers in future scientific research and discuss possible problems, outlooks and future needs in the use of optical rulers for technological applications.

Quantitatively Understanding Cellular Uptake of Gold Nanoparticles via Radioactivity Analysis

The development of multifunctional gold nanoparticles (AuNPs) underwent an explosion in the last two decades. However, many questions regarding detailed surface chemistry and how they are affecting the behaviors of AuNPs in vivo and in vitro still need to be addressed before AuNPs can be widely adapted into clinical settings. In this work, radioactivity analysis was employed for quantitative evaluation of I-125 radiolabeled AuNPs uptakes by cancer cells. Facilitated with this new method, we have conducted initial bioevaluation of surfactant-free AuNPs produced by femtosecond laser ablation. Cellular uptake of AuNPs as a function of the RGD density on the AuNP surface, as well as a function of time, has been quantified. The radioactivity analysis may shed light on the dynamic interactions of AuNPs with cancer cells, and help achieve optimized designs of AuNPs for future clinical applications.

MoS2-based nanoprobes for detection of silver ions in aqueous solutions and bacteria

Silver as an extensively used antibacterial agent also poses potential threats to the environment and human health. Hence, in this work, we design a fluorescent nanoprobe by using rhodamine B isothiocyanate (RhoBS) adsorbed MoS2 nanosheets to realize sensitive and selective detection of Ag(+). On the surface of RhoBS-loaded MoS2 nanosheets, Ag(+) can be reduced to Ag nanoparticles, which afterward could not only lead to the detachment of RhoBS molecules and thus their recovered fluorescence but also the surface-enhanced fluorescence from RhoBS remaining adsorbed on MoS2. Such an interesting mechanism allows highly sensitive detection of Ag(+) (down to 10 nM) with great selectivity among other metal ions. Moreover, we further demonstrate that our MoS2-RhoBS complex could act as a nontoxic nanoprobe to detect Ag(+) in live bacteria samples. Our work resulted from an unexpected finding and suggests the promise of two-dimensional transition-metal sulfide nanosheets as a novel platform for chemical and biological sensing.

Fluorescent and colorimetric sensors for environmental mercury detection

The development of fluorescent and colorimetric sensing strategies for environmental mercury is described.

Optical reading of contaminants in aqueous media based on gold nanoparticles

With increasing trends of global population growth, urbanization, pollution over-exploitation, and climate change, the safe water supply has become a global issue and is threatening our society in terms of sustainable development. Therefore, there is a growing need for a water-monitoring platform with the capability of rapidness, specificity, low-cost, and robustness. This review summarizes the recent developments in the design and application of gold nanoparticles (AuNPs) based optical assays to detect contaminants in aqueous media with a high performance. First, a brief discussion on the correlation between the optical reading strategy and the optical properties of AuNPs is presented. Then, we summarize the principle behind AuNP-based optical assays to detect different contaminants, such as toxic metal ion, anion, and pesticides, according to different optical reading strategies: colorimetry, scattering, and fluorescence. Finally, the comparison of these assays and the outlook of AuNP-based optical detection are discussed.

RuNH2@AuNPs as two-photon luminescent probes for thiols in living cells and tissues

Two-photon luminescent sensors have emerged as promising molecular tools for imaging biomolecules in living systems. Here, we present hybrid gold nanocomposites RuNH2@AuNPs as luminescence off-on probes in response to thiols, which can replace the Ru(II) complexes on the surfaces of the AuNPs to release the luminophore RuNH2. The liberated Ru(II) complexes exhibit strong two-photon luminescence and a large two-photon absorption cross section by using the two-photon excitation wavelength at 800 nm. Furthermore, the probe responses toward thiols with high selectivity and insensitivity to pH over the biologically relevant pH range. This two-photon probe can visualize biological thiols levels in live cells as well as in living mouse tissues at depths of 80-170 μm by two-photon microscopy.

Highly photoluminescent silicon nanocrystals for rapid, label-free and recyclable detection of mercuric ions

Hydrothermal treatment of 3-aminopropyltrimethoxysilane (APTMS) in the presence of sodium citrate generates a suspension of highly fluorescent silicon nanocrystals that fluoresces blue under UV irradiation. The photoluminescent quantum yield of the as-prepared silicon nanocrystals was calculated to be 21.6%, with quinine sulfate as the standard reference. Only mercuric ions (Hg(2+)) can readily prevent the fluorescence of the silicon nanocrystals, indicating a remarkably high selectivity towards Hg(2+) over other metal ions. The optimized sensor system shows a sensitive detection range from 50 nM to 1 μM and a detection limit of 50 nM. The quenching mechanism was explained in terms of optical absorption spectra and time-resolved fluorescence decay spectra. Due to the strong interaction of Hg(2+) with the thiol group, the fluorescence can be fully recovered by biothiols such as cysteine and glutathione, therefore, a regenerative strategy has been proposed and successfully applied to detect Hg(2+) by the same sensor for at least five cycles. Endowed with relatively high sensitivity and selectivity, the present sensor holds the potential to be applied for mercuric assay in water.

Fluorescent switch for fast and selective detection of mercury (II) ions in vitro and in living cells and a simple device for its removal

A water-soluble, biocompatible, and fluorescent chemosensor (1) for label-free, simple, and fast detection of mercury ions (Hg(2+)) in aqueous solutions and in HepG2 cells with high selectivity is reported herein. Chelation of 1 with Hg(2+) results in the disappearance of its fluorescence emission at 350 nm and the appearance of a new emission at 405 nm. Selectivity and interference studies indicated that 1 could be selectively chelated by Hg(2+) without interference from other metal ions. Insight into the mechanisms responsible for its fluorescence effect was gained from ultrafast transient absorption spectroscopy. With these properties, 1 was successfully applied for imaging Hg(2+) in living cells and for removing Hg(2+) from river water. Moreover, we also constructed a simple device for fast and effective removal of Hg(2+) from contaminated liquid samples.

Detection and spatial mapping of mercury contamination in water samples using a smart-phone

Detection of environmental contamination such as trace-level toxic heavy metal ions mostly relies on bulky and costly analytical instruments. However, a considerable global need exists for portable, rapid, specific, sensitive, and cost-effective detection techniques that can be used in resource-limited and field settings. Here we introduce a smart-phone-based hand-held platform that allows the quantification of mercury(II) ions in water samples with parts per billion (ppb) level of sensitivity. For this task, we created an integrated opto-mechanical attachment to the built-in camera module of a smart-phone to digitally quantify mercury concentration using a plasmonic gold nanoparticle (Au NP) and aptamer based colorimetric transmission assay that is implemented in disposable test tubes. With this smart-phone attachment that weighs <40 g, we quantified mercury(II) ion concentration in water samples by using a two-color ratiometric method employing light-emitting diodes (LEDs) at 523 and 625 nm, where a custom-developed smart application was utilized to process each acquired transmission image on the same phone to achieve a limit of detection of ∼ 3.5 ppb. Using this smart-phone-based detection platform, we generated a mercury contamination map by measuring water samples at over 50 locations in California (USA), taken from city tap water sources, rivers, lakes, and beaches. With its cost-effective design, field-portability, and wireless data connectivity, this sensitive and specific heavy metal detection platform running on cellphones could be rather useful for distributed sensing, tracking, and sharing of water contamination information as a function of both space and time.

Synthesis of dabsyl-appended cyclophanes and their heterodimer formation with pyrene-appended cyclophanes

As a quencher-type host, dabsyl-appended cyclophanes bearing positively and negatively charged side chains (1a and 1b, respectively) were synthesized. Formation of cyclophane heterodimers of 1a with anionic fluorescent cyclophane bearing a pyrene moiety 2b was confirmed by fluorescence titration experiments. The 1:1 binding constant (K) of 1a toward 2b was calculated to be 1.6 × 10(5) M(-1). On the other hand, almost no complexation affinity of 1a toward cationic analogue of fluorescent cyclophane 2a was confirmed by the identical methods, indicating that electrostatic interactions became effective in the formation of cyclophane heterodimers. In addition, van't Hoff analysis applied to the temperature-dependent K values for the heterodimer formation gave negative enthalpy (ΔH) and entropy changes (ΔS). The large and negative ΔH values as well as small and also negative ΔS values showed that the complexation is an exothermic and enthalpy-controlled but not entropy-driven process. A similar trend of molecular recognition was also confirmed for formation of cyclophane heterodimers of 1b with 2a by the identical methods.

Electrochemiluminescence energy transfer-promoted ultrasensitive immunoassay using near-infrared-emitting CdSeTe/CdS/ZnS quantum dots and gold nanorods

The marriage of energy transfer with electrochemiluminescence has produced a new technology named electrochemiluminescence energy transfer (ECL-ET), which can realize effective and sensitive detection of biomolecules. To obtain optimal ECL-ET efficiency, perfect energy overlapped donor/acceptor pair is of great importance. Herein, we present a sensitive ECL-ET based immunosensor for the detection of tumor markers, using energy tunable CdSeTe/CdS/ZnS double shell quantum dots (QDs) and gold nanorods (GNRs) as the donor and acceptor, respectively. Firstly a facile microwave-assisted strategy for the synthesis of green- to near-infrared-emitting CdSeTe/CdS/ZnS QDs with time- and component-tunable photoluminescence was proposed. And, on the basis of the adjustable optical properties of both CdSeTe/CdS/ZnS QDs and GNRs, excellent overlap between donor emission and acceptor absorption can be obtained to ensure effective ECL-ET quenching, thus improving the sensing sensitivity. This method represents a novel approach for versatile detection of biomolecules at low concentrations.

Picomolar detection of mercuric ions by means of gold-silver core-shell nanorods

We report an ultrasensitive and selective probe for detection of mercuric ions using gold-silver core-shell nanorods as the substrate of surface-enhanced Raman scattering. The detection limit of this probe for mercuric ions can be as low as 1 pM. The efficiency of this probe in complex samples was evaluated by allowing detection of spiked mercuric ions in river water and fish samples.

Gold nanoparticle-based activatable probe for sensing ultralow levels of prostate-specific antigen

It is still in high demand to develop extremely sensitive and accurate clinical tools for biomarkers of interest for early diagnosis and monitoring of diseases. In this report, we present a highly sensitive and compatible gold nanoparticle (AuNP)-based fluorescence-activatable probe for sensing ultralow levels of prostate-specific antigen (PSA) in patient serum samples. The limit of detection of the newly developed probe for PSA was pushed down to 0.032 pg/mL, which is more than 2 orders of magnitude lower than that of the conventional fluorescence probe. The ultrahigh sensitivity of this probe was attributed to the high loading efficiency of the dyes on AuNP surfaces and high fluorescence quenching-unquenching abilities of the dye-AuNP pairs. The efficiency and robustness of this probe were investigated in patient serum samples, demonstrating the great potential of this probe in real-world applications.