Bi(1)-(x)Sb(x) alloy nanocrystals: colloidal synthesis, charge transport, and thermoelectric properties

Magnetism Modulation for Cryogenic Thermoelectric Enhancements in Fe3O4 Nanoparticle-Incorporated Bi0.85Sb0.15 Nanocomposites

The internal magnetism introduced by the magnetic nanoparticles combined with the external magnetic field can provide an effective way to modulate the thermoelectric (TE) properties of materials. Herein, we comparably investigate the effect of magnetism of Fe₃O₄ nanoparticles (Fe₃O₄-NPs) and the external magnetic field on the cryogenic thermoelectric properties of Fe₃O₄-NP/Bi_0.85Sb_0.15 nanocomposites. With the ferromagnetism-superparamagnetism transition, the Fe₃O₄-NPs in the superparamagnetic state exhibit a stronger magneto-trapped carrier effect, where the electron concentration at high temperature is evidently reduced. With the simultaneous increase of S and reduction of electronic thermal conductivity, a high ZT value of 0.33 at 180 K is obtained for 0.05 wt % Fe₃O₄/Bi_0.85Sb_0.15. Meanwhile, under the external magnetic field, the magnetoresistance of the composites is suppressed by Fe₃O₄-NPs, which results in a remarkable enhancement of the electronic transport performance. Consequently, the highest ZT value of 0.48 at 220 K under 1 T is achieved for 0.1 wt % Fe₃O₄-NPs/Bi_0.85Sb_0.15, increased by 55% compared with that of the matrix. A single-leg device is prepared using 0.1 wt % Fe₃O₄-NP/Bi_0.85Sb_0.15 nanocomposites. Its cooling temperature difference at 180 K reaches 1.3 and 3.2 K under 0 and 1 T when applying 300 mA current, increased by 20 and 46% compared with that of the matrix, respectively. This work suggests that magnetism modulation with introducing magnetic nanoparticles will enhance the TE and magneto-TE performance of composite materials.

Nanocrystal Ordering Enhances Thermal Transport and Mechanics in Single-Domain Colloidal Nanocrystal Superlattices

Colloidal nanocrystal (NC) assemblies are promising for optoelectronic, photovoltaic, and thermoelectric applications. However, using these materials can be challenging in actual devices because they have a limited range of thermal conductivity and elastic modulus, which results in heat dissipation and mechanical robustness challenges. Here, we report thermal transport and mechanical measurements on single-domain colloidal PbS nanocrystal superlattices (NCSLs) that have long-range order as well as measurements on nanocrystal films (NCFs) that are comparatively disordered. Over an NC diameter range of 3.0-6.1 nm, we observe that NCSLs have thermal conductivities and Young's moduli that are up to ∼3 times higher than those of the corresponding NCFs. We also find that these properties are more sensitive to NC diameter in NCSLs relative to NCFs. Our measurements and computational modeling indicate that stronger ligand-ligand interactions due to enhanced ligand interdigitation and alignment in NCSLs account for the improved thermal transport and mechanical properties.

Molecular quantum interference effects on thermopower in hybrid 2-dimensional monolayers

Quantum interference effects in single-molecule devices can significantly enhance the thermoelectric properties of these devices. However, single-molecule systems have limited utility for power conversion. In this work, we study the effects of destructive quantum interference in molecular junctions on the thermoelectric properties of hybrid, 2-dimensional molecule-nanoparticle monolayers. We study two isomers of benzenedithiol molecules, with either a para or meta configuration for the thiol groups, as molecular interlinkers between gold nanoparticles in the structure. The asymmetrical structure in the meta configuration significantly improves the Seebeck coefficient and power factor over the para configuration. These results suggest that thermoelectric performance of engineered, nanostructured material can be enhanced by harnessing quantum interference effects in the substituent components.

Dopant-Assisted Matrix Stabilization Enables Thermoelectric Performance Enhancement in n-Type Quantum Dot Films

Efficient thermoelectric generators require further progress in developing n-type semiconductors that combine low thermal conductivity with high electrical conductivity. By embedding colloidal quantum dots (CQDs) in a metal halide matrix (QDMH), the metal halide matrix can enhance phonon scattering, thus suppressing thermal transport; however, simultaneously achieving high electrical conductivity in such systems has previously been limited by the deleterious impact of a large density of interfaces on charge transport. Therefore, new strategies are needed to improve charge carrier transport without sacrificing matrix-enabled low thermal transport. Here, we report the use of chemical doping in the solution state to improve electron transport while maintaining low thermal transport in QDMH films. By incorporating cesium carbonate (Cs₂CO₃) salts as a dopant prior to matrix formation, we find that the dopant stabilizes the matrix in colloidal inks and enables efficient n-type doping in QDMH films. As a result, this strategy leads to an enhanced n-type thermoelectric behavior in solution-processed QDMH films near room temperature, with a thermal conductivity of 0.25 W m^-1 K^-1-significantly lower than in prior films based on organic-ligand-cross-linked CQD films (>0.6 W m^-1 K^-1) and spark-plasma-sintered CQD systems (>1 W m^-1 K^-1). This study provides a pathway to developing efficient n-type thermoelectric materials with low thermal conductivity using single-step deposition and low-temperature processing.

Bismuthanylstibanes

Thermally-robust bismuthanylstibanes are prepared in a one-step, high yield reaction, providing the first examples of neutral Bi-Sb σ-bonds in the solid state. DFT calculations indicate that the bis(silylamino)naphthalene scaffold is well-suited for supporting otherwise labile bonds. The reaction chemistry of the Bi-Sb bond is debuted by showing fission using NH₃BH₃ and insertion of a sulfur atom, the latter providing the first example of a Bi-S-Sb motif.

From Complex Inorganic Oxides to Ag-Bi Nanoalloy: Synthesis by Femtosecond Laser Irradiation

Bimetallic nanoalloys with a wide variety of structures and compositions have been fabricated through many diverse techniques. Generally, various steps and chemicals are involved in their fabrication. In this study, the synthesis of Ag-Bi nanoalloys by femtosecond laser irradiation of an inorganic oxide Ag₂WO₄/NaBiO₃ target without any chemicals like reducing agents or solvent is presented. The interaction between these materials and the ultrashort pulse of light allows the migration of Ag and Bi atoms from the crystal lattice to the particles surfaces and then to the plasma plume, where the reduction of the positively charged Ag and Bi species in their respective metallic species takes place. Subsequently, the controlled nucleation and growth of the Ag-Bi alloyed nanoparticles occurs in situ during the irradiation process in air. Although at the bulk level, these elements are highly immiscible, it was experimentally demonstrated that at nanoscale, the Ag-Bi nanoalloy can assume a randomly mixed structure with up to 6 ± 1 atom % of Bi solubilized into the face-centered cubic structure of Ag. Furthermore, the Ag-Bi binary system possesses high antibacterial activity against Staphylococcus aureus (methicillin-resistant and methicilin-susceptible), which is interesting for potential antimicrobial applications, consequently increasing their range of applicability. The present results provide potential insights into the structures formed by the Ag-Bi systems at the nanoscale and reveal a new processing method where complex inorganic oxides can be used as precursors for the controlled synthesis of alloyed bimetallic nanoparticles.

Enhanced thermoelectric properties of hydrothermally synthesized Bi0.88−xZnxSb0.12 nanoalloys below the semiconductor–semimetal transition temperature

Bi_0.88−xZn_xSb_0.12 alloys with x = 0.00, 0.05, 0.10, and 0.15 were prepared using hydrothermal synthesis in combination with evacuating-and-encapsulating sintering. The effects of partial Zn substitution for Bi and different sintering temperatures on the thermoelectric properties of Bi_0.88−xZn_xSb_0.12 alloys were investigated between 25 K and 425 K. Both the electrical conductivity and absolute thermopower are enhanced for the set of alloys sintered at 250 °C. The maximum power factor of 57.60 μW cm⁻¹ K⁻² is attained for the x = 0.05 alloy sintered at 250 °C. As compared with Zn-free Bi_0.88Sb_0.12, both the total thermal conductivity and lattice component are reduced upon Zn doping. Bipolar conduction is observed in both electronic and thermal transport. The maximum zT of 0.47 is attained at 275 K for the x = 0.05 alloy sintered at 250 °C.

The peak zT is attained for hydrothermally synthesized Bi_0.83Zn_0.05Sb_0.12 nanoalloy due to the significantly enhanced thermoelectric power factor and relatively low thermal conductivity.

Continuous Purification of Colloidal Quantum Dots in Large-Scale Using Porous Electrodes in Flow Channel

Colloidal quantum dots (QDs) afford huge potential in numerous applications owing to their excellent optical and electronic properties. After the synthesis of QDs, separating QDs from unreacted impurities in large scale is one of the biggest issues to achieve scalable and high performance optoelectronic applications. Thus far, however, continuous purification method, which is essential for mass production, has rarely been reported. In this study, we developed a new continuous purification process that is suitable to the mass production of high-quality QDs. As-synthesized QDs are driven by electrophoresis in a flow channel and captured by porous electrodes and finally separated from the unreacted impurities. Nuclear magnetic resonance and ultraviolet/visible/near-infrared absorption spectroscopic data clearly showed that the impurities were efficiently removed from QDs with the purification yield, defined as the ratio of the mass of purified QDs to that of QDs in the crude solution, up to 87%. Also, we could successfully predict the purification yield depending on purification conditions with a simple theoretical model. The proposed large-scale purification process could be an important cornerstone for the mass production and industrial use of high-quality QDs.

Memristive Switching in Bi(1-x)Sb(x) Nanowires

We investigated the memristive switching behavior in bismuth-antimony alloy (Bi(1-x)Sb(x)) single nanowire devices at 0.1 ≤ x ≤ 0.42. At 0.15 ≤ x ≤ 0.42, most Bi(1-x)Sb(x) single nanowire devices exhibited bipolar resistive switching (RS) behavior with on/off ratios of approximately 10(4) and narrow variations in switching parameters. Moreover, the resistance values in the low-resistance state (LRS) were insensitive to x. On the other hand, at 0.1 ≤ x ≤ 0.15, some Bi(1-x)Sb(x) single nanowire devices showed complementary RS-like behavior, which was ascribed to asymmetric contact properties. Transmission electron microscopy and elemental mapping images of Bi, Sb, and O obtained from the cross sections of the Bi(1-x)Sb(x) single nanowire devices, which were cut before and after RS, revealed that the mobile species was Sb ions, and the migration of the Sb ions to the nanowire surface brought the switch to LRS. In addition, we demonstrated that two types of synaptic plasticity, namely, short-term plasticity and long-term potentiation, could be implemented in Bi(1-x)Sb(x) nanowires by applying a sequence of voltage pulses with different repetition intervals.

Bandgap Tunability in Sb-Alloyed BiVO₄ Quaternary Oxides as Visible Light Absorbers for Solar Fuel Applications

The challenge of fine compositional tuning and microstructure control in complex oxides is overcome by developing a general two-step synthetic approach. Antimony-alloyed bismuth vanadate, which is identified as a novel light absorber for solar fuel applications, is prepared in a wide compositional range. The bandgap of this quaternary oxide linearly decreases with the Sb content, in agreement with first-principles calculations.

Prospects of nanoscience with nanocrystals

Colloidal nanocrystals (NCs, i.e., crystalline nanoparticles) have become an important class of materials with great potential for applications ranging from medicine to electronic and optoelectronic devices. Today's strong research focus on NCs has been prompted by the tremendous progress in their synthesis. Impressively narrow size distributions of just a few percent, rational shape-engineering, compositional modulation, electronic doping, and tailored surface chemistries are now feasible for a broad range of inorganic compounds. The performance of inorganic NC-based photovoltaic and light-emitting devices has become competitive to other state-of-the-art materials. Semiconductor NCs hold unique promise for near- and mid-infrared technologies, where very few semiconductor materials are available. On a purely fundamental side, new insights into NC growth, chemical transformations, and self-organization can be gained from rapidly progressing in situ characterization and direct imaging techniques. New phenomena are constantly being discovered in the photophysics of NCs and in the electronic properties of NC solids. In this Nano Focus, we review the state of the art in research on colloidal NCs focusing on the most recent works published in the last 2 years.

Continuous flow purification of nanocrystal quantum dots

Colloidal quantum dot (QD) purification is typically conducted via repeating precipitation-redispersion involving massive amounts of organic solvents and has been the main obstacle in mass production of QDs with dependable surface properties. Our results show that the electric field apparently affects the streamlining of QDs and that we could continuously collect stably dispersed QDs by the electrophoretic purification process. The purification yield increases as the electric potential difference increases or the flow rate decreases, but reaches an asymptotic value. The yield can be further improved by raising the absolute magnitude of the mobility of QDs with the addition of solvents with high dielectric constants. The continuous purification process sheds light on industrial production of colloidal nanomaterials.