A route toward digital manipulation of water nanodroplets on surfaces

Mechanical Mapping of Nanoblisters Confined by Two-Dimensional Materials Reveals Complex Ridge Patterns

Understanding the mechanics of blisters confined by two-dimensional (2D) materials is of great importance for either fundamental studies or for their practical applications. In this work, we investigate the mechanical properties of nanoscale 2D material blisters using contact-resonance atomic force microscopy (CR-AFM). From the measurement results at the blister centers, the blisters' internal pressures are characterized, which are shown to be inversely proportional to the blisters' sizes. Our measurements agree considerably well with values predicted by theoretical mechanic analyses of the blisters. In addition, high-resolution mechanical mapping with CR-AFM reveals fine, complex ridge patterns of the blisters' confining membranes, which can hardly be distinguished from their topographies. The pattern complexity of a blister system is shown to increase with an increase in its bendability.

Diameter-Optimum Spreading for the Impinging of Water Nanodroplets on Solid Surfaces

The impinging of water nanodroplets on solid surfaces is crucial to many nanotechnologies. Through large-scale molecular dynamics simulations, the size effect on the spreading of water nanodroplets after impinging on hydrophilic, graphite, and hydrophobic surfaces under low impinging velocities has been systematically studied. The spreading rates of nanodroplets first increase and then decrease and gradually become constant with the increase of nanodroplet diameter. The nanodroplets with the diameters of 17-19 nm possess the highest spreading rates because of the combined effect of the strongest interfacial interaction and the strongest surface interaction within water molecules. The highest water molecule densities, hydrogen bond numbers, and dielectric constants of interface and surface layers mainly contribute to the lowest interface work of adhesion and surface tension values at optimal diameters. These results unveil the nonmonotonic characteristics of spreading velocity, interface work of adhesion and surface tension with nanodroplet diameter for nanodroplets on solid surfaces.

Ab initio study of water anchored in graphene pristine and vacancy-type defects

CONTEXT

In this paper, we have addressed two issues that are relevant to the interaction of water in pristine and vacant graphene through first-principles calculations based on the Density Functional Theory (DFT). The results showed that for the interaction of pristine graphene with water, the DOWN configuration (with the hydrogen atoms facing downwards) was the most stable, presenting binding energies in the order of -13.62 kJ/mol at a distance of 2.375 Å in the TOP position. We also evaluated the interaction of water with two vacancy models, removing one carbon atom (Vac-1C) and four atoms (Vac-4C). In the Vac-1C system, the most favourable system was the DOWN configuration, with binding energies ranging from -20.60 kJ/mol to -18.41 kJ/mol in the TOP and UP positions, respectively. A different behaviour was observed for the interaction of water with Vac-4C; regardless of the configuration of the water, it is always more favourable for the interaction to occur through the vacancy centre, with binding energies ​​between -13.28 kJ/mol and -20.49 kJ/mol. Thus, the results presented open perspectives for the technological development of nanomembranes as well as providing a better understanding of the wettability effects of graphene sheets, whether pristine or with defects.

METHOD

We evaluated the interaction of pristine and vacant graphene with the water molecule, through calculations based on Density Functional Theory (DFT); implemented by the SIESTA program. The electronic, energetic, and structural properties were analyzed by solving self-consistent Kohn-Sham equations. In all calculations, a double ζ plus a polarized function (DZP) was used for the numerical baise set. Local Density Approximation (LDA) with the Perdew and Zunger (PZ) parameterisation along with a basis set superposition error (BSSE) correction were used to describe the exchange and correlation potential (Vxc). The water and isolated graphene structures were relaxed until the residual forces were less than 0.05 eV/Å^-1 in all atomic coordinates.

Time-Dependent Pinning of Nanoblisters Confined by Two-Dimensional Sheets. Part 1: Scaling Law and Hydrostatic Pressure

Understanding the mechanics of blisters is important for studying two-dimensional (2D) materials, where nanoscale blisters appear frequently in their heterostructures. It also benefits the understanding of a novel partial wetting phenomenon known as elastic wetting, where droplets are confined by thin films. In this two-part work, we study the static mechanics of nanoscale blisters confined between a 2D elastic sheet and its substrate (part 1) as well as their pinning/depinning dynamics (part 2). Here, in part 1, we investigate the morphology characteristics and hydrostatic pressures of the blisters by using atomic force microscopy (AFM) measurements and theoretical analysis. The morphology characteristics of the blisters are shown to be the interplay results of the elasticity of the capping sheet, the adhesion between the capping sheet and the substrate, and the interfacial tensions. A universal scaling law is observed for the blisters in the experiments. Our analyses show that the hydrostatic pressures inside the blisters can be estimated from their morphology characteristics. The reliability of such an estimation is verified by AFM indentation measurements of the hydrostatic pressures of a variety of blisters.

Time-Dependent Pinning of Nanoblisters Confined by Two-Dimensional Sheets. Part 2: Contact Line Pinning

Pinning of droplets on solids is an omnipresent wetting phenomenon that attracts intense research interest. Unlike in classical wetting, pinning effects in a novel wetting problem where droplets are confined onto the substrates by elastic films have hardly been investigated. Here, following our study in an accompanying paper (part 1) on the static mechanics of nanoscale blisters confined between a two-dimensional elastic sheet and its substrate, we investigate in this part the pinning behaviors of such blisters by using atomic force microscopy. The blisters' lateral retention forces are shown to scale almost linearly with their contact lines and to increase until saturation upon increasing their resting times. Our analysis reveals a mechanism of microdeformation of the substrate at the contact line. The creep of the microdeformation is found to cause the time-dependent pinning, which is evidenced by residual fine ridge structures left by blisters after their spread after long resting times.

Confinement Dynamics of Nanodroplets between Two Surfaces: Effects of Wettability and Electric Field

The electrowetting effect and related applications of tiny droplets have aroused widespread research interest. In this work, we report molecular dynamics simulations of confinement dynamics of nanodroplets under different droplet-surface interactions and surface distances under an external electric field. So far, the effect of the surface-droplet interactions on electric field-induced dynamics behaviors of droplets in confined spaces has not been extensively studied. Our results show that in the absence of electric field there is a critical value of surface wettability for the shape transition of droplets. Above this value, the droplet is divided into small droplets adhered on the bottom and top surfaces; below this value, the droplets are detached from the surfaces. When an external electric field is applied parallel to the surfaces, the droplet spreads on the surface along the direction of the electric field. It was found that the surface separation significantly influences the transition of the droplet shape. The steady morphology of the droplets under the electric field depends on the surface-droplet interaction and surface separation. We explore the underlying mechanism causing the morphological transition through analyzing the molecular interactions, the number of interracial molecules and the interaction force between the droplets and surfaces. These results provide basic insights into the molecular interactions of nanodroplets under different confined environments, and clues for applications of confined nanodroplets under the control of electric field.

Moiré superlattices and related moiré excitons in twisted van der Waals heterostructures

Recent advances in moiré superlattices and moiré excitons, such as quantum emission arrays, low-energy flat bands, and Mott insulators, have rapidly attracted attention in the fields of optoelectronics, materials, and energy research. The interlayer twist turns into a degree of freedom that alters the properties of the systems of materials, and the realization of moiré excitons also offers the feasibility of making artificial exciton crystals. Moreover, moiré excitons exhibit many exciting properties under the regulation of various external conditions, including spatial polarisation, alternating dipolar to alternating dipolar moments and gate-dependence to gate voltage dependence; all are pertinent to their applications in nano-photonics and quantum information. But the lag in theoretical development and the low-efficiency of processing technologies significantly limit the potential of moiré superlattice applications. In this review, we systematically summarise and discuss the recent progress in moiré superlattices and moiré excitons, and analyze the current challenges, and put forward relevant recommendations. There is no doubt that further research will lead to breakthroughs in their application and promote reforms and innovations in traditional solid-state physics and materials science.

Unexpected large impact of small charges on surface frictions with similar wetting properties

Generally, the interface friction on solid surfaces is regarded as consistent with wetting behaviors, characterized by the contact angles. Here using molecular dynamics simulations, we find that even a small charge difference (≤0.36 e) causes a change in the friction coefficient of over an order of magnitude on two-dimensional material and lipid surfaces, despite similar contact angles. This large difference is confirmed by experimentally measuring interfacial friction of graphite and MoS₂ contacting on water, using atomic force microscopy. The large variation in the friction coefficient is attributed to the different fluctuations of localized potential energy under inhomogeneous charge distribution. Our results help to understand the dynamics of two-dimensional materials and biomolecules, generally formed by atoms with small charge, including nanomaterials, such as nitrogen-doped graphene, hydrogen-terminated graphene, or MoS₂, and molecular transport through cell membranes.

Super-Slippery Degraded Black Phosphorus/Silicon Dioxide Interface

The interfaces between two-dimensional (2D) materials and the silicon dioxide (SiO₂)/silicon (Si) substrate, generally considered as a solid-solid mechanical contact, have been especially emphasized for the structure design and the property optimization in microsystems and nanoengineering. The basic understanding of the interfacial structure and dynamics for 2D material-based systems still remains one of the inevitable challenges ahead. Here, an interfacial mobile water layer is indicated to insert into the interface of the degraded black phosphorus (BP) flake and the SiO₂/Si substrate owing to the induced hydroxyl groups during the ambient degradation. A super-slippery degraded BP/SiO₂ interface was observed with the interfacial shear stress (ISS) experimentally evaluated as low as 0.029 ± 0.004 MPa, being comparable to the ISS values of incommensurate rigid crystalline contacts. In-depth investigation of the interfacial structure through nuclear magnetic resonance spectroscopy and in situ X-ray photoelectron spectroscopy depth profiling revealed that the interfacial liquid water was responsible for the super-slippery BP/SiO₂ interface with extremely low shear stress. This finding clarifies the strong interactions between degraded BP and water molecules, which supports the potential wider applications of the few-layer BP nanomaterial in biological lubrication.

Surface Energy Change of Atomic-Scale Metal Oxide Thin Films by Phase Transformation

Fine-tuning of the surface free energy (SFE) of a solid material facilitates its use in a wide range of applications requiring precise control of the ubiquitous presence of liquid on the surface. In this study, we found that the SFE of rare-earth oxide (REO) thin films deposited by atomic layer deposition (ALD) gradually decreased with increasing film thickness; however, these changes could not be understood by classical interaction models. Herein, the mechanism underlying the aforesaid decrease was systematically studied by measuring contact angles, surface potential, adhesion force, crystalline structures, chemical compositions, and morphologies of the REO films. A growth mode of the REO films was observed: layer-by-layer growth at the initial stage with an amorphous phase and subsequent crystalline island growth, accompanied by a change in the crystalline structure and orientation that affects the SFE. The portion of the surface crystalline facets terminated with (222) and (440) planes evolved with an increase in ALD cycles and film thickness, as an amorphous phase was transformed. Based on this information, we demonstrated an SFE-tuned liquid tweezer with selectivity to target liquid droplets. We believe that the results of this fundamental and practical study, with excellent selectivity to liquids, will have significant impacts on coating technology.

Precise control of the interlayer spacing between graphene sheets by hydrated cations

Based on DFT computations, we show that different hydrated cations can precisely control the interlayer spacings between graphene sheets, which are smaller than that between graphene oxide sheets, indicating an ion sieving.

Nanomanipulation of Individual DNA Molecules Covered by Single-Layered Reduced Graphene Oxide Sheets on a Solid Substrate

Nanomanipulation of single DNA molecules has great potential in fundamental genetic research and clinical analysis, and is a good model system for studying the interfacial effects on physiochemical processes, which occur when manipulating the linear DNA molecules with an atomic force microscope (AFM) tip. Here, we demonstrate that AFM nanomanipulation can be carried out on DNA molecules covered by a single-layered reduced graphene oxide sheet. Nanomanipulation, which includes cutting, pushing, and sweeping operations, specific to the covered DNA molecules can be achieved in a well-controlled manner using AFM in the PeakForce Quantitative Nano-Mechanics mode. It was found that the normal force required to cut covered DNA strands is over five times greater than that required for naked strands. This technique provides a distinctive method for the construction of graphene architecture by tailoring the underlying artificial DNA nanostructures.

Chemistry in nanoconfined water

Nanoconfined liquids have extremely different properties from the bulk, which profoundly affects chemical reactions taking place in nanosolvation.

Nanoconfined liquids have extremely different properties from the bulk, which profoundly affects chemical reactions taking place in nanosolvation. Here, we present extensive ab initio simulations of a vast set of chemical reactions within a water lamella that is nanoconfined by mineral surfaces, which might be relevant to prebiotic peptide formation in aqueous environments. Our results disclose a rich interplay of distinct effects, from steric factors typical of reactions occurring in small spaces to a charge-stabilization effect in nanoconfined water at extreme conditions similar to that observed in bulk water when changing from extreme to ambient conditions. These effects are found to modify significantly not only the energetics but also the mechanisms of reactions happening in nanoconfined water in comparison to the corresponding bulk regime.

A modified Wenzel model for water wetting on van der Waals layered materials with topographic surfaces

A modified Wenzel model is proposed for describing the wetting behavior of van der Waals layered materials with topographic surfaces, based on the measured linear relationship between water wetting and surface roughness for high quality Bi₂Se₃ thin films, synthesized using molecular beam epitaxy (MBE) in the optimized temperature window of 180-200 °C. The water contact angles are found to have apparent dependence on the nanoscale surface morphology, enabling film wettability as a new tool to quickly characterize the quality of atomically thin films. The water contact angle of the ideal Bi₂Se₃ surface is inferred to be ∼98.4°, indicating its intrinsic hydrophobic nature; however, the edge of the terrace on its surface is extremely hydrophilic, leading to easy hydrophobic/hydrophilic transitions. The atomistic mechanism is further revealed by first principles calculations. The regulated wettability is of great importance for electronic applications of Bi₂Se₃ and other two-dimensional materials with distinctive electronic structures.

Ion-Specific Effects on the Elongation Dynamics of a Nanosized Water Droplet in Applied Electric Fields

We report an all-atom molecular dynamics study of the structures and dynamics of salty water droplets on a silicon surface under the influence of applied electric field. Our simulation results support ion-specific effects on the elongation dynamics of salty nanodroplets, induced by the field. This feature has not been explored up to now in monovalent salts. Nevertheless, the importance of ion-specific effects is widely confirmed in biological and colloidal systems. In particular, the increase of salt concentration enhances the effect of the nature of ions on the wetting properties of droplets. In the presence of electric field (0.05 V Å^-1), a complete spreading is implemented in a short time for different droplets at a concentration of 1 M, and the droplet morphology is stable, observed at long time scales. However, a higher salt concentration of 4 M considerably suppresses the spreading process owing to the increase of surface tension. It was found that the NaCl droplet shows deformation oscillations along the external field, but cannot fully wet the substrate surface. By contrast, the CsCl droplet reaches complete elongation rapidly and adopts a steady strip shape. The KCl droplet undergoes frequent transitions between breakup and connection. Additionally, the droplets can be elongated only when the electric field strength exceeds a threshold value. The dipole orientation of interfacial water and the ionic diffusion exhibit ion-specific dependences, but the hydrogen bond network is scarcely disturbed, excluding a concentration-dependent effect.

Thermally Induced Graphene Rotation on Hexagonal Boron Nitride

In this Letter, we report the observation of thermally induced rotation of graphene on hexagonal boron nitride (h-BN). After the rotation, two thermally stable configurations of graphene on h-BN with a relative lattice twisting angle of 0° (most stable) and 30° (metastable), respectively, were found. Graphene on h-BN with a twisting angle below (above) a critical angle of ∼12±2° tends to rotate towards 0° (30°) at a temperature of >100 °C, which is in line with our theoretical simulations. In addition, by manipulating the annealing temperature and the flake sizes of graphene, moiré superlattices with large spatial periods of graphene on h-BN are achieved. Our studies provide a detailed understanding of the thermodynamic properties of graphene on h-BN and a feasible approach to obtaining van der Waals heterostructures with aligned lattices.

Fast diffusion of water nanodroplets on graphene

Diffusion across surfaces generally involves motion on a vibrating but otherwise stationary substrate. Here, using molecular dynamics, we show that a layered material such as graphene opens up a new mechanism for surface diffusion whereby adsorbates are carried by propagating ripples in a motion similar to surfing. For water nanodroplets, we demonstrate that the mechanism leads to exceedingly fast diffusion that is 2-3 orders of magnitude faster than the self-diffusion of water molecules in liquid water. We also reveal the underlying principles that regulate this new mechanism for diffusion and show how it also applies to adsorbates other than water, thus opening up the prospect of achieving fast and controllable motion of adsorbates across material surfaces more generally.

The role of ambient ice-like water adlayers formed at the interfaces of graphene on hydrophobic and hydrophilic substrates probed using scanning probe microscopy

In this work, we report the role of ice-like water adlayers (IWLs) formed under ambient conditions in between mechanically exfoliated as-prepared and patterned few layer graphene (FLG) and multi-layer graphene (MLG) on hydrophobic Si and hydrophilic SiO2/Si substrates. The growth of the IWL is probed by measuring the height changes in graphene using intermittent contact atomic force microscopy (IC-AFM) and their electrostatic effect is studied using electrostatic force microscopy (EFM) over time. It is found that more IWLs are formed within a shorter period of time, when both as-prepared graphene and underlying substrates are either hydrophobic or hydrophilic in nature. In contrast, AFM voltage nanolithographically patterned trenches on FLG and MLG on the Si substrate show quick formation of IWLs. The effect of IWL formed, on the dimensions of trenches, is correlated with the variation of the measured EFM phase shift over time. This study demonstrates the dependence of the formation of IWLs under ambient conditions on the affinity towards water, at the interface of graphene on hydrophobic and hydrophilic substrates, which has important implications for the performance of graphene-based nanoelectronic devices.

Wetting of mono and few-layered WS2 and MoS2 films supported on Si/SiO2 substrates

The recent interest and excitement in graphene has also opened up a pandora's box of other two-dimensional (2D) materials and material combinations which are now beginning to come to the fore. One family of these emerging 2D materials is transition metal dichalcogenides (TMDs). So far there is very limited understanding on the wetting behavior of "monolayer" TMD materials. In this study, we synthesized large-area, continuous monolayer tungsten disulfide (WS2) and molybdenum disulfide (MoS2) films on SiO2/Si substrates by the thermal reduction and sulfurization of WO3 and MO3 thin films. The monolayer TMD films displayed an advancing water contact angle of ∼83° as compared to ∼90° for the bulk material. We also prepared bilayer and trilayer WS2 films and studied the transition of the water contact angle with increasing number of layers. The advancing water contact angle increased to ∼85° for the bilayer and then to ∼90° for the trilayer film. Beyond three layers, there was no significant change in the measured water contact angle. This type of wetting transition indicates that water interacts to some extent with the underlying silica substrate through the monolayer TMD sheet. The experimentally observed wetting transition with numbers of TMD layers lies in-between the predictions of one continuum model that considers only van der Waals attractions and another model that considers only dipole-dipole interactions. We also explored wetting as a function of aging. A clean single-layer WS2 film (without airborne contaminants) was shown to be strongly hydrophilic with an advancing water contact angle of ∼70°. However, over time, the sample ages as hydrocarbons and water present in air adsorb onto the clean WS2 sheet. After ∼7 days, the aging process is completed and the advancing water contact angle of the aged single-layer WS2 film stabilizes at ∼83°. These results suggest that clean (i.e., nonaged) monolayer TMDs are hydrophilic materials. We further show that substitution of sulfur atoms by oxygen in the lattice of aged monolayer WS2 and MoS2 films can be used to generate well-defined 'hydrophobic-hydrophilic' patterns that preferentially accumulate and create microdrop arrays on the surface during water condensation and evaporation experiments.

Two-dimensional material confined water

CONSPECTUS: The interface between water and other materials under ambient conditions is of fundamental importance due to its relevance in daily life and a broad range of scientific research. The structural and dynamic properties of water at an interface have been proven to be significantly difference than those of bulk water. However, the exact nature of these interfacial water adlayers at ambient conditions is still under debate. Recent scanning probe microscopy (SPM) experiments, where two-dimensional (2D) materials as ultrathin coatings are utilized to assist the visualization of interfacial water adlayers, have made remarkable progress on interfacial water and started to clarify some of these fundamental scientific questions. In this Account, we review the recently conducted research exploring the properties of confined water between 2D materials and various surfaces under ambient conditions. Initially, we review the earlier studies of water adsorbed on hydrophilic substrates under ambient conditions in the absence of 2D coating materials, which shows the direct microscopic results. Subsequently, we focus on the studies of water adlayer growth at both hydrophilic and hydrophobic substrates in the presence of 2D coating materials. Ice-like water adlayers confined between hydrophobic graphene and hydrophilic substrates can be directly observed in detail by SPM. It was found that the packing structure of the water adlayer was determined by the hydrophilic substrates, while the orientation of intercalation water domains was directed by the graphene coating. In contrast to hydrophilic substrates, liquid-like nanodroplets confined between hydrophobic graphene and hydrophobic substrates appear close to step edges and atomic-scale surface defects, indicating that atomic-scale surface defects play significant roles in determining the adsorption of water on hydrophobic substrates. In addition, we also review the phenomena of confined water between 2D hydrophilic MoS2 and the hydrophilic substrate. Finally, we further discuss researchers taking advantage of 2D graphene coatings to stabilize confined water nanodroplets to manipulate nanofluidics through applying an external force by using novel SPM techniques. Moreover, for future technology application purposes, the doping effect of confined water is also discussed. The use of 2D materials as ultrathin coatings to investigate the properties of confined water under ambient conditions is developing and recognized as a profound approach to gain fundamental knowledge of water. This ideal model system will provide new opportunities in various research fields.

Microwetting of supported graphene on hydrophobic surfaces revealed by polymerized interfacial femtodroplets

Understanding the wettability of graphene is the crucial step toward the design and control of graphene-based surface in contact with liquids. In this work, the static microwettability of a supported single layer graphene (SLG) immersed in water or alcoholic aqueous solutions is revealed by the morphological characterization of the polymerized interfacial femtoliter droplets. As expected, the contact angle of the femtoliter droplets on the SLG in water is in between that on the underlying silanized silicon and that on graphite (HOPG). However, the wettability of femtoliter droplets on the SLG demonstrates a unique dependence on the compositions of the surrounding liquid medium: Their contact angle on SLG becomes much larger than that on both graphite and on silanized silicon, once short-chain alcohol molecules are present in the surrounding medium. To account for this finding, we hypothesize two scenarios to rationalize the effect of alcohol on the microwettability on SLG. The understanding elucidated in this study may allow for improved control of the interaction between graphene and the surrounding liquid environment and facilitate applications in which graphene is in contact with liquids, such as in microfluidics and in lab-on-chip systems.