Effect of molecular asymmetry on the charge transport physics of high mobility n-type molecular semiconductors investigated by scanning Kelvin probe microscopy

Band-like transport in non-fullerene acceptor semiconductor Y6

The recently reported non-fullerene acceptor (NFA) Y6 has been extensively investigated for high-performance organic solar cells. However, its charge transport property and physics have not been fully studied. In this work, we acquired a deeper understanding of the charge transport in Y6 by fabricating and characterizing thin-film transistors (TFTs), and found that the electron mobility of Y6 is over 0.3-0.4 cm²/(V⋅s) in top-gate bottom-contact devices, which is at least one order of magnitude higher than that of another well-known NFA ITIC. More importantly, we observed band-like transport in Y6 spin-coated films through temperature-dependent measurements on TFTs. This is particularly amazing since such transport behavior is rarely seen in polycrystalline organic semiconductor films. Further morphology characterization and discussions indicate that the band-like transport originates from the unique molecule packing motif of Y6 and the special phase of the film. As such, this work not only demonstrates the superior charge transport property of Y6, but also suggests the great potential of developing high-mobility n-type organic semiconductors, on the basis of Y6.

Progress on photocatalytic semiconductor hybrids for bacterial inactivation

Due to its use of green and renewable energy and negligible bacterial resistance, photocatalytic bacterial inactivation is to be considered a promising sterilization process. Herein, we explore the relevant mechanisms of the photoinduced process on the active sites of semiconductors with an emphasis on the active sites of semiconductors, the photoexcited electron transfer, ROS-induced toxicity and interactions between semiconductors and bacteria. Pristine semiconductors such as metal oxides (TiO₂ and ZnO) have been widely reported; however, they suffer some drawbacks such as narrow optical response and high photogenerated carrier recombination. Herein, some typical modification strategies will be discussed including noble metal doping, ion doping, hybrid heterojunctions and dye sensitization. Besides, the biosafety and biocompatibility issues of semiconductor materials are also considered for the evaluation of their potential for further biomedical applications. Furthermore, 2D materials have become promising candidates in recent years due to their wide optical response to NIR light, superior antibacterial activity and favorable biocompatibility. Besides, the current research limitations and challenges are illustrated to introduce the appealing directions and design considerations for the future development of photocatalytic semiconductors for antibacterial applications.

Effect of electron-withdrawing groups on molecular properties of naphthyl and anthryl bithiophenes as potential n-type semiconductors

This comparative study on a series of 2-naphthyl and 2-anthrylbithiophene derivatives identified nitro and dicyanovinyl as the most effective acceptor groups. While the former group leads to high fluorescence, the latter causes high solubility.

Solution-Processable Quinoidal Dithioalkylterthiophene-Based Small Molecules Pseudo-Pentathienoacenes via an Intramolecular S···S Lock for High-Performance n-Type Organic Field-Effect Transistors

A new organic small-molecule family comprising tetracyanoquinodimethane-substituted quinoidal dithioalky(SR)terthiophenes (DSTQs) (DSTQ-6 (1); SR = SC₆H₁₃, DSTQ-10 (2); SR = SC₁₀H₂₁, DSTQ-14 (3); SR = SC₁₀H₂₁) was synthesized and contrasted with a nonthioalkylated analogue (DRTQ-14 (4); R = C₁₄H₂₉). The physical, electrochemical, and electrical properties of these new compounds are thoroughly investigated. Optimized geometries obtained from density functional theory calculations and single-crystal X-ray diffraction reveal the planarity of the SR-containing DSTQ core. DSTQs pack in a slipped π-π stacked two-dimensional arrangement, with a short intermolecular stacking distance of 3.55 Å and short intermolecular S···N contacts of 3.56 Å. Thin-film morphological analysis by grazing incident X-ray diffraction reveals that all DSTQ molecules are packed in an edge-on fashion on the substrate. The favorable molecular packing, the high core planarity, and very low lowest unoccupied molecular orbital (LUMO) energy level (-4.2 eV) suggest that DSTQs could be electron-transporting semiconductors. Organic field-effect transistors based on solution-sheared DSTQ-14 exhibit the highest electron mobility of 0.77 cm² V^-1 s^-1 with good ambient stability, which is the highest value reported to date for such a solution process terthiophene-based small molecular semiconductor. These results demonstrate that the device performance of solution-sheared DSTQs can be improved by side chain engineering.

Exfoliating a CdII -Purine Framework: Conversion of Nanosheets-to-Nanofibers and Studies of Elastic and Capacitive Properties

Layered bulk crystals are amenable to exfoliation to yield 2D nanosheets through isolation and intercalation processes, which could be further converted to 1D nanoscale structures. The latter inherit gross morphological and physical properties associated with the precursor structures. Herein, we report three purine-based crystal structures 1, 2, and 3, where 3 is obtained by a single-crystal-to-single-crystal transformation from 2 and is a conformational polymorph of 1. Next, we describe the sonication-assisted liquid exfoliation of 1, a Cd^II -purine coordination framework, into nanosheets and nanofibers in a solvent-dependent process. The exfoliation was carefully studied at low temperatures to ascertain this unique conversion. This work also features the determination of the Young's modulus and surface potential of the bioinspired Cd^II -based nanostructures by using amplitude modulation-frequency modulation atomic force microscopy and Kelvin probe force microscopy, respectively, revealing their interesting elastic and capacitive properties for their possible use in electronics and energy devices. Electron impedance spectroscopy measurements further established a higher value of capacitance for the exfoliated Cd^II framework as compared to the ligand alone.

A molecular-scale portrait of domain imaging in organic surfaces

Progress in the general understanding of structure-property relationships in organic devices requires experimental tools capable of imaging structural details, such as molecular packing or domain attributes, on ultra-thin films. An operation mode of scanning force microscopy, related to friction force microscopy (FFM) and known as transverse shear microscopy (TSM), has demonstrated the ability to reveal the orientation of crystalline domains in organic surfaces with nanometer resolution. In spite of these promising results, numerous questions remain about the physical origin of the TSM domain imaging mechanism. Taking as a benchmark a PTCDI-C8 sub-monolayer, we demonstrate experimentally and theoretically that such a mechanism is the same atomic scale stick-slip ruling FFM leading to the angular dependence of both signals. Lattice-resolved images acquired on top of differently oriented PTCDI-C8 molecular domains are crucial to permit azimuthal sampling, without the need for sample rotation. The simulations reveal that, though the surface crystallography is the direct cause of the FFM and TSM signals, the manifestation of anisotropy will largely depend on the amplitude of the surface potential corrugation as well as on the temperature. This work provides a novel nanoscale strategy for the quantitative analysis of organic thin films based on their nanotribological response.

Seeing is believing: atomic force microscopy imaging for nanomaterial research

Atomic force microscopy can image nanomaterial properties such as the topography, elasticity, adhesion, friction, electrical properties, and magnetism.

Facile Preparation of a Platinum Silicide Nanoparticle-Modified Tip Apex for Scanning Kelvin Probe Microscopy

In this study, we propose an ultra-facile approach to prepare a platinum silicide nanoparticle-modified tip apex (PSM tip) used for scanning Kelvin probe microscopy (SKPM). We combined a localized fluoride-assisted galvanic replacement reaction (LFAGRR) and atmospheric microwave annealing (AMA) to deposit a single platinum silicide nanoparticle with a diameter of 32 nm on the apex of a bare silicon tip of atomic force microscopy (AFM). The total process was completed in an ambient environment in less than 3 min. The improved potential resolution in the SKPM measurement was verified. Moreover, the resolution of the topography is comparable to that of a bare silicon tip. In addition, the negative charges found on the PSM tips suggest the possibility of exploring the use of current PSM tips to sense electric fields more precisely. The ultra-fast and cost-effective preparation of the PSM tips provides a new direction for the preparation of functional tips for scanning probe microscopy.