Multifunctional biosensor based on localized surface plasmon resonance for monitoring small molecule-protein interaction

Trace detection of chiral J-aggregated molecules adsorbed on single Au nanorods

Trace detection of chiral molecules, which is of great significance in chemical, biological, medical and pharmaceutical sciences, requires microscopic techniques at the single-particle or single-molecule level. Although ensemble experiments show that the circular dichroism of chiral molecules can be amplified by plasmonic nanocrystals, trace detection of small chiral molecules remains challenging due to weak signals that are far below the detection limit. Herein, we demonstrate trace detection of chiral J-aggregated molecules adsorbed on individual Au nanorods (NRs) using single-particle circular differential scattering (CDS) spectroscopy. Through measuring the single-particle CDS spectra, we identified dip-peak bisignatures and further determined the chirality by matching them with calculations modelled with chiral media. We therefore find that plasmonic nanocrystals can dramatically amplify the circular dichroism of strongly coupled molecules to a detectable level so that the detection limit is as low as 3.9 × 10³ molecules on an individual plasmonic nanoparticle, whereas 2.5 × 10¹² molecules free in solution are barely detectable using a commercial circular dichroism instrument, suggesting a significant amplification factor of 10⁸. Our method provides a promising strategy with a high amplification factor, shedding light on the trace detection of chiral molecules using optical microscopic methods.

Advances in Electrochemical Biosensors Based on Nanomaterials for Protein Biomarker Detection in Saliva

The focus on precise medicine enhances the need for timely diagnosis and frequent monitoring of chronic diseases. Moreover, the recent pandemic of severe acute respiratory syndrome coronavirus 2 poses a great demand for rapid detection and surveillance of viral infections. The detection of protein biomarkers and antigens in the saliva allows rapid identification of diseases or disease changes in scenarios where and when the test response at the point of care is mandated. While traditional methods of protein testing fail to provide the desired fast results, electrochemical biosensors based on nanomaterials hold perfect characteristics for the detection of biomarkers in point-of-care settings. The recent advances in electrochemical sensors for salivary protein detection are critically reviewed in this work, with emphasis on the role of nanomaterials to boost the biosensor analytical performance and increase the reliability of the test in human saliva samples. Furthermore, this work identifies the critical factors for further modernization of the nanomaterial-based electrochemical sensors, envisaging the development and implementation of next-generation sample-in-answer-out systems.

Protein Dielectrophoresis with Gradient Array of Conductive Electrodes Sheds New Light on Empirical Theory

Dielectrophoresis (DEP) is a versatile tool for the precise microscale manipulation of a broad range of substances. To unleash the full potential of DEP for the manipulation of complex molecular-sized particulates such as proteins requires the development of appropriate theoretical models and their comprehensive experimental verification. Here, we construct an original DEP platform and test the Hölzel-Pethig empirical model for protein DEP. Three different proteins are studied: lysozyme, BSA, and lactoferrin. Their molecular Clausius-Mossotti function is obtained by detecting their trapping event via the measurement of the fluorescence intensity to identify the minimum electric field gradient required to overcome dispersive forces. We observe a significant discrepancy with published theoretical data and, after a very careful analysis to rule out experimental errors, conclude that more sophisticated theoretical models are required for the response of molecular entities in DEP fields. The developed experimental platform, which includes arrays of sawtooth metal electrode pairs with varying gaps and produces variations of the electric field gradient, provides a versatile tool that can broaden the utilization of DEP for molecular entities.

Nanotechnology: recent advances in viticulture and enology

Nowadays, nanoscience is a leading modern science that has a major impact on the food, pharmaceutical, and agriculture sectors. Several nanomaterials show a great potential for use during vine growing and winemaking processes. In viticulture, nanotechnology can be applied to protect vines against phytopathogens and to improve grape yield and quality. Thus, nanotechnology may allow the use of lesser amounts of phytochemical compounds, reducing environmental impact and promoting a more sustainable agriculture. And in winemaking, nanomaterials and nanodevices can be used to control the growth of spoilage microorganisms and to reduce or remove undesirable compounds, such as ethyl phenols (4-ethylphenol and 4-ethylguaiacol), biogenic amines, and tartaric acid, and so on, as well as to facilitate some technological processes (i.e. in wine filtration to eliminate microorganisms). This review summarizes recent studies with applications of nanotechnology in viticulture in order to facilitate agronomic management and optimize grape production and in enology to improve wine quality and safety. © 2021 Society of Chemical Industry.

Nanophotonic Approaches for Chirality Sensing

Chiral nanophotonic materials are promising candidates for biosensing applications because they focus light into nanometer dimensions, increasing their sensitivity to the molecular signatures of their surroundings. Recent advances in nanomaterial-enhanced chirality sensing provide detection limits as low as attomolar concentrations (10^-18 M) for biomolecules and are relevant to the pharmaceutical industry, forensic drug testing, and medical applications that require high sensitivity. Here, we review the development of chiral nanomaterials and their application for detecting biomolecules, supramolecular structures, and other environmental stimuli. We discuss superchiral near-field generation in both dielectric and plasmonic metamaterials that are composed of chiral or achiral nanostructure arrays. These materials are also applicable for enhancing chiroptical signals from biomolecules. We review the plasmon-coupled circular dichroism mechanism observed for plasmonic nanoparticles and discuss how hotspot-enhanced plasmon-coupled circular dichroism applies to biosensing. We then review single-particle spectroscopic methods for achieving the ultimate goal of single-molecule chirality sensing. Finally, we discuss future outlooks of nanophotonic chiral systems.

Amplified plasmonic and microfluidic setup for DNA monitoring

Plasmonic nanosensors for label-free detection of DNA require excellent sensing resolution, which is crucial when monitoring short DNA sequences, as these induce tiny peak shifts, compared to large biomolecules. We report a versatile and simple strategy for plasmonic sensor signal enhancement by assembling multiple (four) plasmonic sensors in series. This approach provided a fourfold signal enhancement, increased signal-to-noise ratio, and improved sensitivity for DNA detection. The response of multiple sensors based on AuNSpheres was also compared with  AuNRods, the latter showing better sensing resolution. The amplification system based on AuNR was integrated into  a microfluidic sequential injection platform and applied to the monitoring of DNA, specifically from environmental invasive species-zebra mussels. DNA from zebra mussels was log concentration-dependent from 1 to 1 × 10⁶ pM, reaching a detection limit of 2.0 pM. In situ tests were also successfully applied to real samples, within less than 45 min, using DNA extracted from zebra mussel meat. The plasmonic nanosensors' signal can be used as a binary output (yes/no) to assess the presence of those invasive species. Even though these genosensors were applied to the monitoring of DNA in environmental samples, they potentially offer advantage in a wide range of fields, such as disease diagnostics.

Nucleotide-decorated AuNPs as probes for nucleotide-binding proteins

Gold nanoparticles (AuNPs) decorated with biologically relevant molecules have variety of applications in optical sensing of bioanalytes. Coating AuNPs with small nucleotides produces particles with high stability in water, but functionality-compatible strategies are needed to uncover the full potential of this type of conjugates. Here, we demonstrate that lipoic acid-modified dinucleotides can be used to modify AuNPs surfaces in a controllable manner to produce conjugates that are stable in aqueous buffers and biological mixtures and capable of interacting with nucleotide-binding proteins. Using this strategy we obtained AuNPs decorated with 7-methylguanosine mRNA 5' cap analogs and showed that they bind cap-specific protein, eIF4E. AuNPs decorated with non-functional dinucleotides also interacted with eIF4E, albeit with lower affinity, suggesting that eIF4E binding to cap-decorated AuNPs is partially mediated by unspecific ionic interactions. This issue was overcome by applying lipoic-acid-Tris conjugate as a charge-neutral diluting molecule. Tris-Lipo-diluted cap-AuNPs conjugates interacted with eIF4E in fully specific manner, enabling design of functional tools. To demonstrate the potential of these conjugates in protein sensing, we designed a two-component eIF4E sensing system consisting of cap-AuNP and 4E-BP1-AuNP conjugates, wherein 4E-BP1 is a short peptide derived from 4E-BP protein that specifically binds eIF4E at a site different to that of the 5' cap. This system facilitated controlled aggregation, in which eIF4E plays the role of the agent that crosslinks two types of AuNP, thereby inducing a naked-eye visible absorbance redshift. The reported AuNPs-nucleotide conjugation method based on lipoic acid affinity for gold, can be harnessed to obtain other types of nucleotide-functionalized AuNPs, thereby paving the way to studying other nucleotide-binding proteins.

Development of a highly sensitive sensor chip using optical diagnostic based on functionalized plasmonically active AuNPs

Measuring solution concentration plays an important role in chemical, biochemical, clinical diagnosis, environmental monitoring, and biological analyses. In this work, we develop a transmission-mode localized surface plasmon resonance sensor chip system and convenient method which is highly efficient, highly sensitive for detection sensing using multimode fiber. The plasmonically active sensor's surface AuNPs with high-density NPs were decorated onto 1 cm sensing length of various clad-free fiber in the form of homogeneous monolayer utilizing a self-assembly process for immobilization of the target molecule. The carboxyl bond is formed through a functional reaction on the sensor head. Using the significance in the refractive index difference and numerical aperture, which is caused by a variation in the concentration of measuring bovine serum albumin (BSA) protein which can be accurately measured by the output signal. The refractive index variation of the medium analyte layer can be converted to signal output power change at the He-Ne wavelength of 632.8 nm. The sensor detection limit was estimated to be 0.075 ng ml^-1for BSA protein which shows high sensitivity compared to other types of label-free optical biosensors. This also leads to a possibility of finding the improvement in the sensitivity label-free biosensors. The conventional method should allow multimode fiber biosensors to become a possible replacement for conventional biosensing techniques based on fluorescence.

Glutathione-Priming Nanoreactors Enable Fluorophore Core/Shell Transition for Precision Cancer Imaging

In an attempt to develop an imaging probe with ultra-high sensitivity for a broad range of tumors in vivo and inspired by the concept of chemical synthetic nanoreactors, we designed a type of glutathione-priming fluorescent nanoreactor (GPN) with an albumin-coating shell and hydrophobic polymer core containing disulfide bonds, protonatable blocks, and indocyanine green (ICG), a near-infrared fluorophore. The albumin played multiple roles including biocompatible carriers, hydrophilic stabilizer, "receptor" of the fluorophores, and even targeting molecules. The protonation of the hydrophobic core triggered the outside-to-core transport of acidic glutathione (GSH), as well as the core-to-shell transference of ICGs after the disulfide bond cleavage by GSH, which induced strong binding of fluorophores with albumins on the GPN shell, initiating intensive fluorescence signals. As a result, the GPNs demonstrated extremely high response sensitivity and imaging contrast, proper time window, and broad cancer specificity. In fact, an orthogonal activation pattern was found in vitro with an ON/OFF ratio up to 24.7-fold. Furthermore, the nanoprobes specifically amplified the tumor signals in five cancer-bearing mouse models and actualized tumor margin delineation with a contrast up to 20-fold, demonstrating much better imaging efficacy than the other four commercially available probes. Therefore, the GPNs provide a new paradigm in developing high-performance bioresponsive nanoprobes.

A Highly Compensated Interferometer for Biochemical Analysis

Here we report an improved interferometric sensing approach that facilitates high sensitivity nanovolume refractive index (RI) measurements and molecular interaction assays without a temperature controller. The compensated backscattering interferometer (CBSI) is based on a helium-neon (He-Ne) laser, a microfluidic chip, and a CCD array. The CBSI enables simultaneous differential RI measurements within nanoliter volumes, at a compensation level of ca. 5 × 10^-8 RIU in the presence of large thermal perturbations (8 °C). This level of d n/d T compensation is enabled by elongating the laser beam along the central axis of the microfluidic channel and measuring the difference in positional shift of interference patterns from two adjacent regions of the channel. By separating two solutions by an air gap or oil droplet, CBSI can discriminate the difference in RI for the sample and reference at a detection limit of 7 × 10^-7 RIU in the absence of electronic filtering. At this level of ΔRI sensitivity, it is possible to perform label-free, free-solution biochemical assays at the 10s of nM level without the typical high-resolution temperature control needed in conventional interferometers. Here we illustrate the effective use of CBSI by quantifying the binding affinities for mannose-concanavalin A and Ca²⁺-recoverin interactions.

Exploration of Nanoparticle-Mediated Photothermal Effect of TMB-H2O2 Colorimetric System and Its Application in a Visual Quantitative Photothermal Immunoassay

The exploration of new physical and chemical properties of materials and their innovative application in different fields are of great importance to advance analytical chemistry, material science, and other important fields. Herein, we, for the first time, discovered the photothermal effect of an iron oxide nanoparticles (NPs)-mediated TMB (3,3',5,5'-tetramethylbenzidine)-H2O2 colorimetric system, and applied it toward the development of a new NP-mediated photothermal immunoassay platform for visual quantitative biomolecule detection using a thermometer as the signal reader. Using a sandwich-type proof-of-concept immunoassay, we found that the charge transfer complex of the iron oxide NPs-mediated one-electron oxidation product of TMB (oxidized TMB) exhibited not only color changes, but also a strong near-infrared (NIR) laser-driven photothermal effect. Hence, oxidized TMB was explored as a new sensitive photothermal probe to convert the immunoassay signal into heat through the near-infrared laser-driven photothermal effect, enabling simple photothermal immunoassay using a thermometer. Based on the new iron oxide NPs-mediated TMB-H2O2 photothermal immunoassay platform, prostate-specific antigen (PSA) as a model biomarker can be detected at a concentration as low as 1.0 ng·mL-1 in normal human serum. The discovered photothermal effect of the colorimetric system and the developed new photothermal immunoassay platform open up a new horizon for affordable detection of disease biomarkers and have great potential for other important material and biomedical applications of interest.

Quantitative Comparison of Protein Adsorption and Conformational Changes on Dielectric-Coated Nanoplasmonic Sensing Arrays

Nanoplasmonic sensors are a popular, surface-sensitive measurement tool to investigate biomacromolecular interactions at solid-liquid interfaces, opening the door to a wide range of applications. In addition to high surface sensitivity, nanoplasmonic sensors have versatile surface chemistry options as plasmonic metal nanoparticles can be coated with thin dielectric layers. Within this scope, nanoplasmonic sensors have demonstrated promise for tracking protein adsorption and substrate-induced conformational changes on oxide film-coated arrays, although existing studies have been limited to single substrates. Herein, we investigated human serum albumin (HSA) adsorption onto silica- and titania-coated arrays of plasmonic gold nanodisks by localized surface plasmon resonance (LSPR) measurements and established an analytical framework to compare responses across multiple substrates with different sensitivities. While similar responses were recorded on the two substrates for HSA adsorption under physiologically-relevant ionic strength conditions, distinct substrate-specific behavior was observed at lower ionic strength conditions. With decreasing ionic strength, larger measurement responses occurred for HSA adsorption onto silica surfaces, whereas HSA adsorption onto titania surfaces occurred independently of ionic strength condition. Complementary quartz crystal microbalance-dissipation (QCM-D) measurements were also performed, and the trend in adsorption behavior was similar. Of note, the magnitudes of the ionic strength-dependent LSPR and QCM-D measurement responses varied, and are discussed with respect to the measurement principle and surface sensitivity of each technique. Taken together, our findings demonstrate how the high surface sensitivity of nanoplasmonic sensors can be applied to quantitatively characterize protein adsorption across multiple surfaces, and outline broadly-applicable measurement strategies for biointerfacial science applications.

Quantitative investigation on the critical thickness of the dielectric shell for metallic nanoparticles determined by the plasmon decay length

Inert dielectric shells coating the surface of metallic nanoparticles (NPs) are important for enhancing the NPs' stability, biocompatibility, and realizing targeting detection, but they impair NPs' sensing ability due to the electric fields damping. The dielectric shell not only determines the distance of the analyte from the NP surface, but also affects the field decay. From a practical point of view, it is extremely important to investigate the critical thickness of the shell, beyond which the NPs are no longer able to effectively detect the analytes. The plasmon decay length of the shell-coated NPs determines the critical thickness of the coating layer. Extracting from the exponential fitting results, we quantitatively demonstrate that the critical thickness of the shell exhibits a linear dependence on the NP volume and the dielectric constants of the shell and the surrounding medium, but only with a small variation influenced by the NP shape where the dipole resonance is dominated. We show the critical thickness increases with enlarging the NP sizes, or increasing the dielectric constant differences between the shell and surrounding medium. The findings are essential for applications of shell-coated NPs in plasmonic sensing.

Nanoplasmonic sensors for biointerfacial science

In recent years, nanoplasmonic sensors have become widely used for the label-free detection of biomolecules across medical, biotechnology, and environmental science applications. To date, many nanoplasmonic sensing strategies have been developed with outstanding measurement capabilities, enabling detection down to the single-molecule level. One of the most promising directions has been surface-based nanoplasmonic sensors, and the potential of such technologies is still emerging. Going beyond detection, surface-based nanoplasmonic sensors open the door to enhanced, quantitative measurement capabilities across the biointerfacial sciences by taking advantage of high surface sensitivity that pairs well with the size of medically important biomacromolecules and biological particulates such as viruses and exosomes. The goal of this review is to introduce the latest advances in nanoplasmonic sensors for the biointerfacial sciences, including ongoing development of nanoparticle and nanohole arrays for exploring different classes of biomacromolecules interacting at solid-liquid interfaces. The measurement principles for nanoplasmonic sensors based on utilizing the localized surface plasmon resonance (LSPR) and extraordinary optical transmission (EOT) phenomena are first introduced. The following sections are then categorized around different themes within the biointerfacial sciences, specifically protein binding and conformational changes, lipid membrane fabrication, membrane-protein interactions, exosome and virus detection and analysis, and probing nucleic acid conformations and binding interactions. Across these themes, we discuss the growing trend to utilize nanoplasmonic sensors for advanced measurement capabilities, including positional sensing, biomacromolecular conformation analysis, and real-time kinetic monitoring of complex biological interactions. Altogether, these advances highlight the rich potential of nanoplasmonic sensors and the future growth prospects of the community as a whole. With ongoing development of commercial nanoplasmonic sensors and analytical models to interpret corresponding measurement data in the context of biologically relevant interactions, there is significant opportunity to utilize nanoplasmonic sensing strategies for not only fundamental biointerfacial science, but also translational science applications related to clinical medicine and pharmaceutical drug development among countless possibilities.

Whole-Cell Pseudomonas aeruginosa Localized Surface Plasmon Resonance Aptasensor

The detection of whole-cell Pseudomonas aeruginosa presents an intriguing challenge with direct applications in health care and the prevention of nosocomial infection. To address this problem, a localized surface plasmon resonance (LSPR) based sensing platform was developed to detect whole-cell Pseudomonas aeruginosa strain PAO1 using a surface-confined aptamer as an affinity reagent. Nanosphere lithography (NSL) was used to fabricate a sensor surface containing a hexagonal array of Au nanotriangles. The sensor surface was subsequently modified with biotinylated polyethylene glycol (Bt-PEG) thiol/PEG thiol (1:3), neutravidin, and biotinylated aptamer in a sandwich format. The 1:3 (v/v) ratio of Bt-PEG thiol/PEG thiol was specifically chosen to maximize PAO1 binding while minimizing nonspecific adsorption and steric hindrance. In contrast to prior whole-cell LSPR work, the LSPR wavelength shift was shown to be linearly related to bacterial concentration over the range of 10-103 cfu mL-1. This LSPR sensing platform is rapid (∼3 h for detection), sensitive (down to the level of a single bacterium), selective for detection of Pseudomonas strain PAO1 over other strains, and exhibits a clinically relevant dynamic range and excellent shelf life (≥2 months) when stored at ambient conditions. This versatile LSPR sensing platform should be extendable to a wide range of supermolecular analytes, including both bacteria and viruses, by switching affinity reagents, and it has potential to be used in point-of-care and field-based applications.

A saliva molecular imprinted localized surface plasmon resonance biosensor for wine astringency estimation

Wine astringency was evaluated based on the interaction of two complex matrices (red wine and saliva) by combining localized surface plasmon resonance (LSPR) and molecular imprinted polymers (MIP) at gold nanodisks as an alternative to sensorial analysis. The main objective of the work was to simulate wine astringency inside the mouth by mimicking this biological system. The LSPR/MIP sensor provided a linear response for astringency expressed in pentagalloyl glucose (PGG) units in concentrations ranging from 1 to 140μmol/L. The sensor was also applied to wine samples correlating well with sensorial analysis obtained by a trained panel. The correlation of astringency and wine composition was also evaluated showing that anthocyanins may have an important role, not only for pigmentation but also in astringency.

Achieving biosensing at attomolar concentrations of cardiac troponin T in human biofluids by developing a label-free nanoplasmonic analytical assay

A nanoplasmonic-based highly reproducible and ultrasensitive analytical sensor was fabricated to quantify cardiac troponin T at attomolar concentration with high selectivity.

Sub-monolayer silver loss from large gold nanospheres detected by surface plasmon resonance in the sigmoidal region

Nanosilver becomes labile upon entering the human body or the environment. This lability creates silver species with antimicrobial properties that make nanosilver attractive as active components in many consumer products, wound dressings, and agricultural applications. Because lability depends strongly on morphology, it is imperative to use a material with constant lability throughout kinetic studies so that accurate lability data can be acquired with efficient detection. Here 2.5nm thick silver was coated onto 90-nm diameter gold nanosphere cores and this surface silver layer was gradually removed by either chemical or X-ray radiation etching. The most sensitive region of a sigmoidal surface plasmon resonance (SPR) response as a function of silver thickness was found for the first time between 0.9- and 1.6-nm thick silver, revealing a new nanosilver standard for lability studies. The SPR peak position detection sensitivity is 8nm (SPR peak shift)/nm (silver thickness change) within this steepest region of the plasmon response curve whereas outside, sensitivity drops to 1nm/nm. Since the centroid of SPR profiles can be discerned with 0.25nm precision, the 8-nm/nm sensitivity means it is possible to detect a 0.3-angstrom or sub-monolayer change in silver thickness. The SPR response simulated by discrete dipole approximation (DDA) was an identical sigmoidal function between 0 and 2nm of silver coating. These findings were supported by several other analytical measurements, which confirmed no silver recoating during these etching processes.

A one-pot strategy for the detection of proteins based on sterically and allosterically tunable hybridization chain reaction

In this work, we report a facile one-pot strategy for protein detection based on sterically and allosterically tunable hybridization chain reaction (HCR). In our strategy, DNA hairpins H1 and H2 are dual-labeled with pyrene moieties through a six-carbon-atom spacer at each end; and a single-stranded DNA primer is designed to contain two small molecules near each end. In the absence of target protein, the primer can trigger HCR events between alternating H1 and H2 hairpins to form a nicked double-helix. As a result, the pyrene excimers are formed to emit at approximately 485nm. On the contrary, upon binding of the specific target protein onto the primer through the protein-small molecule interaction, the HCR will be inhibited due to the steric and allosteric effect. The changes of the fluorescent signals of pyrene excimers are in response to the concentration of target protein, so that the detection of protein can be realized. We have demonstrated the feasibility of this strategy by using streptavidin (SA) and folate receptor (FR) as model targets. Results show that both of them can be well detected with a detection limit of 1.07nM and 2.7nM, respectively. The developed method for protein assay is flexible, so we infer that the one-pot strategy holds great potential for the detection of other proteins.

Increasing the spectral shifts in LSPR biosensing using DNA-functionalized gold nanorods in a competitive assay format for the detection of interferon-γ

We demonstrate an approach that utilizes DNA-functionalized gold nanorods (AuNRs) in an indirect competitive assay format to increase the spectra shift in localized surface plasmon resonance (LSPR) biosensing. We use interferon gamma (IFN-γ) as a model analyte to demonstrate the feasibility of our detection method. The LSPR chips with periodic gold nanodot arrays are fabricated using a thermal lithography process and are functionalized with IFN-γ aptamers for detection. The DNA-functionalized AuNRs and IFN-γ compete with each other to bind to the aptamers during detection, and the spectra shifts are mainly caused by the AuNRs rather than IFN-γ. When using our approach, the target molecules do not need to be captured by two capture ligands simultaneously during detection and thus do not require multiple binding sites. Both experiments and finite-difference time-domain (FDTD) simulations show that making the AuNRs as close to the chip surface as possible is very critical for increasing LSPR shifts, and the simulated results also show that the orientation of the AuNR affects the plasmon coupling between the gold nanodots on the chip surface and the nearby AuNRs. Although only the detection of IFN-γ is demonstrated in this study, we expect that the LSPR biosensing method can be applied to label-free detection of a variety of molecules as long as suitable aptamers are available.

Surface plasmon effect of carbon nanodots

Luminescent ZnO quantum dots (QDs) have been prepared, and the fluorescence intensity of the QDs can be increased greatly with the introduction of carbon nanodots, while the fluorescence lifetime of the QDs decreases significantly. The fluorescence enhancement and lifetime decrement can be attributed to the surface plasmon effect of the carbon nanodots, and the calculated surface plasmon resonance frequency of the nanodots matches well with the fluorescence spectrum of the ZnO QDs.

Disposable Plasmonics: Plastic Templated Plasmonic Metamaterials with Tunable Chirality

Development of low-cost disposable plasmonic substrates is vital for the applicability of plasmonic sensing. Such devices can be made using injection-molded templates to create plasmonic films. The elements of these plasmonic films are hybrid nanostructures composed of inverse and solid structures. Tuning the modal coupling between the two allows optimization of the optical properties for nanophotonic applications.

Contact Transfer Printing of Side Edge Prefunctionalized Nanoplasmonic Arrays for Flexible microRNA Biosensor

For a nanoplasmonic approach of wearable biochip platform, understanding correlation between near-field enhancement on nanostructures and sensing capability is a crucial step to improve the sensitivity in biosensing. A novel and effective method is demonstrated to increase sensitivity with the enhanced electric fields and to reduce noise with targeted functionalization enabled by transferring side edge prefunctionalized (SEPF) nanostructure arrays onto flexible substrates. Nanostructure sidewalls have selective biochemically functional terminals for the hybridization of microRNAs (miRNAs) and the immobilization of resonant nanoparticles, thus forming hetero assemblies of the nanostructure and the nanoparticles. The unique configuration has shown ultrasensitive biosensing of miRNA-21 in a 10 × 10^-15 m level by a red-shift in scattering spectra induced by a plasmon coupling. This ultrasensitive SEPF nanostructure arrays are fabricated on a flexible substrate using a contact transfer printing with a release layer of trichloro(1H, 1H, 2H, 2H-perfluorooctyl)silane. The introduction of the release layer at a prefunctionalizing step has proven to provide selective functionalization only on the sidewalls of the nanostructures. This reduces a background noise caused by the scattering from nonspecifically bound nanoparticles on the substrate, thus enabling reliable and precise detection.

A regenerative label-free fiber optic sensor using surface plasmon resonance for clinical diagnosis of fibrinogen

Purpose

We present the regenerative label-free fiber optical biosensor that exploits surface plasmon resonance for quantitative detection of fibrinogen (Fbg) extracted from human blood plasma.

Materials and methods

The sensor head was made up of a multimode optical fiber with its polymer cladding replaced by metal composite of nanometer thickness made of silver, aluminum, and nickel. The Ni layer coated allowed a direct immobilization of histidine-tagged peptide (HP) on its metal surface without an additional cross-linker in between. On the coated HP layer, immunoglobulin G was then immobilized for specific capturing of Fbg.

Results

We demonstrated a real-time quantitative detection of Fbg concentrations with limit of detection of ~10 ng/mL. The fact that the HP layer could be removed by imidazole with acid also permitted us to demonstrate the regeneration of the outermost metal surface of the sensor head for the sensor reusability.

Conclusion

The sensor detection limit was estimated to be ~10 pM, which was believed to be sensitive enough for detecting Fbg during the clinical diagnosis of cardiovascular diseases, myocardial infarction, strokes, and Alzheimer’s diseases.

Optofluidic guiding, valving, switching and mixing based on plasmonic heating in a random gold nanoisland substrate

We present a versatile optofluidic flow manipulation scheme based on plasmonic heating in a random gold nanoisland substrate (Au-NIS). With its highly efficient conversion of optical power to hydrodynamic actuation, the reported substrate is used for laser-controlled optofluidic manipulation. It is the first time that microfluidic flow guiding, valving, and mixing within the same functional substrate has been realised. Plasmonic heating provides power for guiding the sample flow inside a microfluidic channel at controlled speed and transport of small particles or living cells is demonstrated. We have also made a laser-actuated microfluidic valve through controlling the surface wettability of the sample/Au-NIS interface. When the laser power density is sufficiently high to generate a bubble, localized convection around the bubble can lead to efficient sample mixing within a microfluidic chamber. The reported Au-NIS scheme practically offers a programmable functional surface on which users have the freedom to control the wetting characteristics with a focused laser beam. We have verified that this optofluidic approach induces insignificant degradation in cell viability. The reported scheme therefore offers a wide range of application possibilities in microfluidics and biomedical engineering, particularly those operated under a low Reynolds number.