Chemical control of graphene architecture: tailoring shape and properties

Two-dimensional nanomaterials as enhanced surface plasmon resonance sensing platforms: Design perspectives and illustrative applications

Both increasing demand for ultrasensitive detection in the scientific community and significant new breakthroughs in materials science field have inspired and promoted the development of new-generation multifunctional plasmonic sensing platforms by adopting promising plasmonic nanomaterials. Recently, high-quality surface plasmon resonance (SPR) sensors, assisted by two dimensional (2D) nanomaterials including 2D van der Waals (vdWs) materials (such as graphene/graphene oxide, transition metal dichalcogenides (TMDs), phosphorene, antimonene, tellurene, MXenes, and metal oxides), 2D metal-organic frameworks (MOFs), 2D hyperbolic metamaterials (HMMs), and 2D optical metasurfaces, have emerged as a class of novel plasmonic sensing platforms that show unprecedented detection sensitivity and impressive performance. This review of recent progress in 2D nanomaterials-enhanced SPR platforms will highlight their compelling plasmonic enhancement features, working mechanisms, and design methodologies, as well as discuss illustrative practical applications. Hence, it is of great importance to describe the latest research progress in 2D nanomaterials-enhanced SPR sensing cases. In this review, we present some concepts of SPR enhanced by 2D nanomaterials, including the basic principles of SPR, signal modulation approaches, and working enhancement mechanisms for various 2D materials-enhanced SPR systems. In addition, we also demonstrate a detailed categorization of 2D nanomaterials-enhanced SPR sensing platforms and comment on their ability to realize ultrasensitive SPR detection. Finally, we conclude with future perspectives for exploring a new generation of 2D nanomaterials-based sensors.

From Forces to Assemblies: van der Waals Forces-Driven Assemblies in Anisotropic Quasi-2D Graphene and Quasi-1D Nanocellulose Heterointerfaces towards Quasi-3D Nanoarchitecture

In the pursuit of advanced functional materials, the role of low-dimensional van der Waals (vdW) heterointerfaces has recently ignited noteworthy scientific interest, particularly in assemblies that incorporate quasi-2D graphene and quasi-1D nanocellulose derivatives. The growing interest predominantly stems from the potential to fabricate distinct genres of quasi-2D/1D nanoarchitecture governed by vdW forces. Despite the possibilities, the inherent properties of these nanoscale entities are limited by in-plane covalent bonding and the existence of dangling π-bonds, constraints that inhibit emergent behavior at heterointerfaces. An innovative response to these limitations proposes a mechanism that binds multilayered quasi-2D nanosheets with quasi-1D nanochains, capitalizing on out-of-plane non-covalent interactions. The approach facilitates the generation of dangling bond-free iso-surfaces and promotes the functionalization of multilayered materials with exceptional properties. However, a gap still persists in understanding transition and alignment mechanisms in disordered multilayered structures, despite the extensive exploration of monolayer and asymmetric bilayer arrangements. In this perspective, we comprehensively review the sophisticated aspects of multidimensional vdW heterointerfaces composed of quasi-2D/1D graphene and nanocellulose derivatives. Further, we discuss the profound impacts of anisotropy nature and geometric configurations, including in-plane and out-of-plane dynamics on multiscale vdW heterointerfaces. Ultimately, we shed light on the emerging prospects and challenges linked to constructing advanced functional materials in the burgeoning domain of quasi-3D nanoarchitecture.

Advances in Structural Modifications and Properties of Graphene Quantum Dots for Biomedical Applications

Graphene quantum dots (GQDs) are carbon-based, zero-dimensional nanomaterials and unique due to their astonishing optical, electronic, chemical, and biological properties. Chemical, photochemical, and biochemical properties of GQDs are intensely being explored for bioimaging, biosensing, and drug delivery. The synthesis of GQDs by top-down and bottom-up approaches, their chemical functionalization, bandgap engineering, and biomedical applications are reviewed here. Current challenges and future perspectives of GQDs are also presented.

Mechanical Mechanism of Ion and Water Molecular Transport through Angstrom-Scale Graphene Derivatives Channels: From Atomic Model to Solid-Liquid Interaction

Ion and water transport at the Angstrom/Nano scale has always been one of the focuses of experimental and theoretical research. In particular, the surface properties of the angstrom channel and the solid-liquid interface interaction will play a decisive role in ion and water transport when the channel size is small to molecular or angstrom level. In this paper, the chemical structure and theoretical model of graphene oxide (GO) are reviewed. Moreover, the mechanical mechanism of water molecules and ions transport through the angstrom channel of GO are discussed, including the mechanism of intermolecular force at a solid/liquid/ion interface, the charge asymmetry effect and the dehydration effect. Angstrom channels, which are precisely constructed by two-dimensional (2D) materials such as GO, provide a new platform and idea for angstrom-scale transport. It provides an important reference for the understanding and cognition of fluid transport mechanism at angstrom-scale and its application in filtration, screening, seawater desalination, gas separation and so on.

Effect of adsorption, hardener, and temperature on mechanical properties of epoxy nanocomposites with functionalized graphene: A molecular dynamics study

Investigating Epoxy/hardener ratio and adsorption rate in epoxy/graphene oxide nanocomposites is of great importance, since these values can affect on the mechanical properties of the nanocomposite. In this study, molecular dynamics simulation was used to investigate and compare the mechanical properties of epoxy/graphene and graphene oxide nanocomposites (EPON 828, EPON 862, Epoxy Novolac, and Cycloaliphatic Epoxy with GNs and GO). Also, the effect of different weight percentages of graphene oxide (0,1,3 and 5 wt %), different weight percentages of epoxy compared to hardener, adsorption rate, and different temperatures were studied. The results showed that increasing the weight percentage of graphene oxide in epoxy matrices improved the adsorption rate between Epoxy/GO and the strength of nanocomposites. In addition, the amount of Young's modulus slightly decreased with increasing the temperature. Besides, the highest amount of Young modulus was obtained by increasing the weight percentage of epoxy to hardener at 63:37 wt %. Moreover, by comparing the mechanical properties of epoxy nanocomposites at 5 wt % graphene oxide, the highest Young modulus were found to be related to Novolac/GO 4.27 Gpa and EPON 862/GO 4.24 Gpa. This study contributes to a more comprehensive understanding on the behavior of the mechanical properties of epoxy/graphene oxide nanocomposites.

Morphology-Control Growth of Graphene Islands by Nonlinear Carbon Supply

Controlling the morphology of graphene and other 2D materials in chemical vapor deposition (CVD) growth is crucial because the morphology reflects the crystal quality of as-synthesized nanomaterials in a certain way, and consequently it indirectly represents the physical properties of 2D materials such as bandgap, selective ion transportation, and impermeability. However, precise control of the morphology is limited by the complex formation mechanism and sensitive growth-environment factors of graphene. Therefore, the CVD synthesis of single-crystal hexagonal-shaped graphene islands with specific sizes is challenging. Herein, an unconventional nonlinear-carbon-supply growth strategy is proposed to realize controllable CVD growth of desired hexagonal graphene islands with specific sizes on Cu substrates. Large-area graphene films of isolated islands with desired densities, sizes, and distances between the islands are successfully synthesized. Subsequently, the direct growth of a planar-tunnel-junction structure based on two parallel gapped graphene islands is achieved by specific adjustment of the growth and etching processes of graphene CVD synthesis. It is therefore demonstrated that the nonlinear-carbon-supply growth strategy is a reliable method for the synthesis of high-quality graphene and can facilitate the direct growth of graphene-based nanodevices in the future.

Recent Advances in the Synthesis and Application of Three-Dimensional Graphene-Based Aerogels

Three-dimensional graphene-based aerogels (3D GAs), combining the intrinsic properties of graphene and 3D porous structure, have attracted increasing research interest in varied fields with potential application. Some related reviews focusing on applications in photoredox catalysis, biomedicine, energy storage, supercapacitor or other single aspect have provided valuable insights into the current status of Gas. However, systematic reviews concentrating on the diverse applications of 3D GAs are still scarce. Herein, we intend to afford a comprehensive summary to the recent progress in the preparation method (template-free and template-directed method) summarized in Preparation Strategies and the application fields (absorbent, anode material, mechanical device, fire-warning material and catalyst) illustrated in Application of 3D GAs with varied morphologies, structures, and properties. Meanwhile, some unsettled issues, existing challenges, and potential opportunities have also been proposed in Future Perspectives to spur further research interest into synthesizing finer 3D GAs and exploring wider and closer practical applications.

Recent Progress on Nanomaterial-Based Membranes for Water Treatment

Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.

Emergence of carbon nanoscrolls from single walled carbon nanotubes: an oxidative route

Carbon nanoscrolls (CNS), a one dimensional (1D) helical form of carbon, have received enormous attention recently due to their unique structure, superior properties and potential applications. In this work, radial merging of HiPCO single walled nanotube (SWNT) bundles and emergence of CNS are reported following a reflux action involving wet oxidation, HCl washing and annealing at 900 °C. We observe macroscopic quantities of graphene sheets (GS) in the post-treated sample and beautiful manifestation of curling and folding of the GS into CNS. Here, a simple solution based oxidative route for successful merging and exfoliation of SWNT bundles and subsequent formation of CNS are demonstrated and discussed in view of Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) studies. Direct evidence of emergence of CNS from SWNTs via synthesis of GS through a simple oxidative method is reported for the first time.

The Structure-Properties-Cytotoxicity Interplay: A Crucial Pathway to Determining Graphene Oxide Biocompatibility

Interest in graphene oxide nature and potential applications (especially nanocarriers) has resulted in numerous studies, but the results do not lead to clear conclusions. In this paper, graphene oxide is obtained by multiple synthesis methods and generally characterized. The mechanism of GO interaction with the organism is hard to summarize due to its high chemical activity and variability during the synthesis process and in biological buffers' environments. When assessing the biocompatibility of GO, it is necessary to take into account many factors derived from nanoparticles (structure, morphology, chemical composition) and the organism (species, defense mechanisms, adaptation). This research aims to determine and compare the in vivo toxicity potential of GO samples from various manufacturers. Each GO sample is analyzed in two concentrations and applied with food. The physiological reactions of an easy model Acheta domesticus (cell viability, apoptosis, oxidative defense, DNA damage) during ten-day lasting exposure were observed. This study emphasizes the variability of the GO nature and complements the biocompatibility aspect, especially in the context of various GO-based experimental models. Changes in the cell biomarkers are discussed in light of detailed physicochemical analysis.

The Blanket Effect: How Turning the World Upside Down Reveals the Nature of Graphene Oxide Cytocompatibility

Extensive cytocompatibility testing of 2D nanocarbon materials including graphene oxide (GO) has been performed, but results remain contradictory. Literature has yet to account for settling-although sedimentation is visible to the eye and physics suggests that even individual graphenic flakes will settle. To investigate settling, a series of functional graphenic materials (FGMs) with differing oxidation levels, functionalities, and physical dimensions are synthesized. Though zeta potential indicates colloidal stability, significant gravitational settling of the FGMs is theoretically and experimentally demonstrated. By creating a setup to culture cells in traditional and inverted orientations in the same well, a "blanket effect" is demonstrated in which FGMs settle out of solution and cover cells at the bottom of the well, ultimately reducing viability. Inverted cells protected from the blanket effect are unaffected. Therefore, these results demonstrate that settling is a crucial factor that must be considered for FGM cytocompatibility experiments.

Hydrothermally Reduced Graphene Hydrogel Intercalated with Divalent Ions for Dye Adsorption Studies

Fundamental studies involving divalent ion intercalated graphene-based hydrogel are still lacking in terms of their adsorption behavior towards dye pollutants. In this study, we prepared a self-assembled Mg2+ and Ca2+ intercalated reduced graphene hydrogel (rGH) using hydrothermal treatment to evaluate the intercalation impact on the adsorption capability towards cationic dyes, methylene blue and rhodamine B. The morphological, structural, thermal, and textural properties of the divalent ion intercalated reduced graphene hydrogels were studied using Fourier transform infrared spectrometer, thermogravimetric analysis, Raman spectroscopy, scanning electron microscope-energy dispersive spectroscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller surface area analysis, and X-ray diffraction. The increased adsorption capacity of the divalent ion intercalated reduced graphene-based hydrogels towards the dye molecules resulted from the increase in the specific surface area and pore volume due to the Mg2+ and Ca2+ bridging that formed spaces between the graphene sheets framework. Adsorption kinetics and the equilibrium adsorption isotherm were fitted by a pseudo-second-order alongside intraparticle diffusion kinetic models and Langmuir isotherm respectively. In addition, the divalent ion intercalated reduced graphene hydrogel showed good generation after three cycles of simultaneous adsorption.

Tale of Two Layered Semiconductor Catalysts toward Artificial Photosynthesis

The ever-increasing reliance on nonrenewable fossil fuels due to massive urbanization and industrialization created problems such as depletion of the primary feedstock and raised the atmospheric CO₂ levels causing global warming. A smart and promising approach is artificial photosynthesis that photocatalytically valorizes CO₂ into high-value chemicals. The inexpensive layered semiconductors like g-C₃N₄ and rGO or GO have the potential to make the process practically feasible for real applications. The suitable band positions with respect to the reduction potentials coupled with the typical surface properties of these layered semiconductors play a beneficial role in photoreduction of CO₂. Additionally, the creation of heterojunction interfaces to achieve the Z-scheme by anchoring g-C₃N₄ and rGO with another semiconductor with proper band alignment and dispersing plasmonic nano metals to obtain Schottky barriers on the layered surfaces also help retarding the electron-hole recombination and boost up the catalytic efficacy. Extensive exploration happened in recent years toward artificial photosynthesis over these materials, which needs a critical compendium. Surprisingly, in spite of the recent explosion of studies on photocatalytic reduction of CO₂ over metal-free semiconductors, there is not a single review on comparing the mechanistic aspects of photoreduction of CO₂ over the layered semiconductors g-C₃N₄ and rGO. This review stands out as a unique documentation, where the mechanism of photocatalytic reduction of CO₂ over this set of materials is critically examined in the context of band and surface modifications. An overall conclusion and outlook at the end indicates the need to develop prototypes for artificial photosynthesis with these well-studied semiconducting layered materials to yield solar fuels.

Heterogeneous deformation of two-dimensional materials for emerging functionalities

Atomically thin 2D materials exhibit strong intralayer covalent bonding and weak interlayer van der Waals interactions, offering unique high in-plane strength and out-of-plane flexibility. While atom-thick nature of 2D materials may cause uncontrolled intrinsic/extrinsic deformation in multiple length scales, it also provides new opportunities for exploring coupling between heterogeneous deformations and emerging functionalities in controllable and scalable ways for electronic, optical, and optoelectronic applications. In this review, we discuss (i) the mechanical characteristics of 2D materials, (ii) uncontrolled inherent deformation and extrinsic heterogeneity present in 2D materials, (iii) experimental strategies for controlled heterogeneous deformation of 2D materials, (iv) 3D structure-induced novel functionalities via crumple/wrinkle structure or kirigami structures, and (v) heterogeneous strain-induced emerging functionalities in exciton and phase engineering. Overall, heterogeneous deformation offers unique advantages for 2D materials research by enabling spatial tunability of 2D materials' interactions with photons, electrons, and molecules in a programmable and controlled manner.

Addressing challenges in providing a reliable ecotoxicology data for graphene-oxide (GO) using an algae (Raphidocelis subcapitata), and the trophic transfer consequence of GO-algae aggregates

The graphene oxide (GO) due to its exceptional structure, physicochemical and mechanical properties is a very attractive material for industry application. Even though, the unique properties of GO (e.g. structure, size, shape, etc.) make the risk assessment of this nanomaterial very challenging in comparison with conventional ecotoxicology studies required by regulators. Thus, there is a need for standardized characterization techniques and methodology to secure a high quality/reliable data on the ecotoxicology of GO, and to establish environmentally acceptable levels. Herein, authors address the crucial quality criteria when evaluating the ecotoxicology of GO using an algae (Raphidocelis subcapitata) and a shrimp (Paratya australiensis). This study provides a detail characterization and modification of the used GO, robust quantification and a suspension stability in different media for ecotoxicology studies. It was observed that under the same exposure conditions the behavior of GO and the estimated outcomes (IC₅₀ values) in modified algae media differed in comparison to the referent media. Further to that, the adverse effects of GO on the algae cell structure and the potential uptake of GO by the algae cells were examined using the TEM with different staining techniques to avoid artefacts. Shrimps which were exposed to GO-algae aggregates via the food intake did not indicate stress or accumulation of GO. Our work presents an important insight to necessity of establishing a benchmark ecotoxicology assays for GO (e.g. characterization techniques, choice of media, etc.) and providing a reliable data to be used by regulators in risk assessment of two-dimensional (2D) nanomaterials.

Precise control of versatile microstructure and properties of graphene aerogel via freezing manipulation

A deep understanding of the shaping technique is urgently required to precisely tailor the pore structure of a graphene aerogel (GA) in order to fit versatile application backgrounds. In the present study, the microstructure and properties of GA were regulated by freeze-casting using an ice crystal template frozen from -10 °C to -196 °C. The phase field simulation method was applied to probe the microstructural evolution of the graphene-H2O system during freezing. Both the experimental and simulation results suggested that the undercooling degree was fundamental to the nucleation and growth of ice crystals and dominated the derived morphology of GA. The pore size of GA was largely regulated from 240 to 6 μm via decreasing the freezing temperature from -10 °C to -196 °C but with a constant density of 8.3 mg cm-3. Rapid freeze casting endowed GA with a refined pore structure and therefore better thermal, electrical, and compressive properties, whereas the GA frozen slowly had superior absorption properties owing to the continuous and tube-like graphene lamellae. The GA frozen at -196 °C exhibited the highest Young's modulus of 327 kPa with similar densities to those reported in the literature. These findings demonstrate the diverse potential applications of GA with regulated pore morphologies and also contribute to cryogenic-induced phase separation methods.

Roles of Graphene Additives in Optimizing the Microstructure and Properties of Ni–Cr–Graphene Coatings

The electrodeposition technique was used to fabricate graphene and Cr particle-reinforced Ni–Cr–graphene coatings. The Rietveld refinement was utilized to analyze the microstructure of Ni deposits in the coatings. The properties including micro-hardness and corrosion behaviors of the coatings were also tested. Results showed that the addition of graphene particles contributed to the dendrite like structure on the surface of the Ni–Cr–graphene coating. The crystallite size and [200] texture of the Ni deposits in the Ni–Cr–graphene coatings were significantly decreased by the graphene particles. The crystallite size of 149.8 nm in the Ni-25–Cr-0–graphene coating was reduced to 35 nm in the Ni-25–Cr-8–graphene coating due to the addition of 8 g/L graphene to the electrolyte. The microstructure evolution of the Ni–Cr–graphene coatings brought about an enhancement in micro-hardness and corrosion resistance of the coatings. The micro-hardness of the coatings was improved from 260.1 HV0.2 of the pure Ni coating to 285.9 HV0.2 of the Ni-25–Cr-0–graphene coating and continually to 461.8 HV0.2 of the Ni-25–Cr-8–graphene coating. In corrosion solution (3.5 wt.% NaCl), the corrosion current (6.22 μA/cm2) of the Ni-25–Cr-0–graphene coating could be decreased by about an order of magnitude through the addition of graphene particles, which was 0.33 μA/cm2 for the Ni-25–Cr-8–graphene coating.

Effect of Doping Temperatures and Nitrogen Precursors on the Physicochemical, Optical, and Electrical Conductivity Properties of Nitrogen-Doped Reduced Graphene Oxide

The greatest challenge in graphene-based material synthesis is achieving large surface area of high conductivity. Thus, tuning physico-electrochemical properties of these materials is of paramount importance. An even greater problem is to obtain a desired dopant configuration which allows control over device sensitivity and enhanced reproducibility. In this work, substitutional doping of graphene oxide (GO) with nitrogen atoms to induce lattice–structural modification of GO resulted in nitrogen-doped reduced graphene oxide (N-rGO). The effect of doping temperatures and various nitrogen precursors on the physicochemical, optical, and conductivity properties of N-rGO is hereby reported. This was achieved by thermal treating GO with different nitrogen precursors at various doping temperatures. The lowest doping temperature (600 °C) resulted in less thermally stable N-rGO, yet with higher porosity, while the highest doping temperature (800 °C) produced the opposite results. The choice of nitrogen precursors had a significant impact on the atomic percentage of nitrogen in N-rGO. Nitrogen-rich precursor, 4-nitro-ο-phenylenediamine, provided N-rGO with favorable physicochemical properties (larger surface area of 154.02 m² g⁻¹) with an enhanced electrical conductivity (0.133 S cm⁻¹) property, making it more useful in energy storage devices. Thus, by adjusting the doping temperatures and nitrogen precursors, one can tailor various properties of N-rGO.

Nanocarbon materials in water disinfection: state-of-the-art and future directions

Water disinfection practices are critical for supplying safe drinking water. Existing water disinfection methods come with various drawbacks, calling for alternative or complementary solutions. Nanocarbon materials (NCMs) offer unique advantages for water disinfection owing to their high antimicrobial activity, often low environmental/human toxicity, and tunable physicochemical properties. Nevertheless, it is a challenge to assess the research progress made so far due to the structure and property diversity in NCMs as well as their different targeted applications. Because of these, here we provide a broad outline of this emerging field in three parts. First, we introduce the antimicrobial activities of the different types of NCMs, including fullerenes, nanodiamonds, carbon (nano)dots, carbon nanotubes, and graphene-family materials. Next, we discuss the current status in applying these NCMs for different water disinfection problems, especially as hydrogel filters, filtration membranes, recyclable aggregates, and electrochemical devices. We also introduce the use of NCMs in photocatalysts for photocatalytic water disinfection. Lastly, we put forward the key hurdles of the field that hamper the realization of the practical applications and propose possible directions for future investigations to address those. We hope that this minireview will encourage researchers to tackle these challenges and innovate NCM-based water disinfection platforms in the near future.

The effects of confinement in pores built of folded graphene sheets on the equilibrium of nitrogen monoxide dimerisation reaction

In the current work we have used reactive Monte Carlo simulations to systematically study the effects of graphene folding on equilibria of NO dimerisation occurring at isolated surfaces and in porous networks built of corrugated graphene sheets. It has been demonstrated that the folding of isolated graphene sheets significantly improves the yield of reactions occurring on their surface. Then, it has also been shown that in slit-like pores formed by the folded graphene sheets the reaction yield depends on the corrugation and arrangement of the pore walls. It has been found that the reaction yield increases when the walls' corrugation is high because of the appearance of narrow regions and/or wedge-like regions in the pores. The condensation of reacting fluid in such places, where the bulges at both walls are close one to another, leads to much higher reaction yield than on the surface of isolated sheets. Thus, we recommended the highly corrugated graphene to control the chemical reactions.

Control of the microstructure and surface chemistry of graphene aerogels via pH and time manipulation by a hydrothermal method

Three-dimensional graphene aerogels of controlled pore size have emerged as an important platform for several applications such as energy storage or oil-water separation. The aerogels of reduced graphene oxide are mouldable and light weight, with a porosity up to 99.9%, consisting mainly of macropores. Graphene aerogel preparation by self-assembly in the liquid phase is a promising strategy due to its tunability and sustainability. For graphene aerogels prepared by a hydrothermal method, it is known that the pH value has an impact on their properties but it is unclear how pH affects the auto-assembly process leading to the final properties. We have monitored the time evolution of the chemical and morphological properties of aerogels as a function of the initial pH value. In the hydrothermal treatment process, the hydrogel is precipitated earlier and with lower oxygen content for basic pH values (∼13 wt% O) than for acidic pH values (∼20 wt% O). Moreover, ∼7 wt% of nitrogen is incorporated on the graphene nanosheets at basic pH generated by NH₃ addition. To our knowledge, there is no precedent showing that the pH value affects the microstructure of graphene nanosheets, which become more twisted and bent for the more intensive deoxygenation occurring at basic pH. The bent nanosheets attained at pH = 11 reduce the stacking by the basal planes and they connect via the borders, hence leading eventually to higher pore volumes. In contrast, the flatter graphene nanosheets attained under acidic pH entail more stacking and higher oxygen content after a long hydrothermal treatment. The gravimetric absorption capacity of non-polar solvents scales directly with the pore volume. The aerogels have proved to be highly selective, recyclable and robust for the absorption of nonpolar solvents in water. The control of the porous structure and surface chemistry by manipulation of pH and time will also pave the way for other applications such as supercapacitors or batteries.

From Flatland to Spaceland: Higher Dimensional Patterning with Two-Dimensional Materials

The creation of three-dimensional (3D) structures from two-dimensional (2D) nanomaterial building blocks enables novel chemical, mechanical or physical functionalities that cannot be realized with planar thin films or in bulk materials. Here, we review the use of emerging 2D materials to create complex out-of-plane surface topographies and 3D material architectures. We focus on recent approaches that yield periodic textures or patterns, and present four techniques as case studies: (i) wrinkling and crumpling of planar sheets, (ii) encapsulation by crumpled nanosheet shells, (iii) origami folding and kirigami cutting to create programmed curvature, and (iv) 3D printing of 2D material suspensions. Work to date in this field has primarily used graphene and graphene oxide as the 2D building blocks, and we consider how these unconventional approaches may be extended to alternative 2D materials and their heterostructures. Taken together, these emerging patterning and texturing techniques represent an intriguing alternative to conventional materials synthesis and processing methods, and are expected to contribute to the development of new composites, stretchable electronics, energy storage devices, chemical barriers, and biomaterials.

Aggregation Kinetics and Self-Assembly Mechanisms of Graphene Quantum Dots in Aqueous Solutions: Cooperative Effects of pH and Electrolytes

The cooperative effects of pH and electrolytes on the aggregation of GQDs and the aggregate morphologies are characterized. Because GQDs have an average size of 9 nm with abundant O-functionalized edges, their suspension was very stable even in a high electrolyte concentration and low pH solution. Divalent cations (Mg²⁺ and Ca²⁺) excelled at aggregating the GQD nanoplates, while monovalent cations (Na⁺ and K⁺) did not disturb the stability. For Na⁺ and K⁺, positive linear correlations were observed between the critical coagulation concentration (CCC) and pH levels. For Mg²⁺ and Ca²⁺, negative, but nonlinear, correlations between CCC and pH values could not be explained and predicted by the traditional DLVO theory. Three-step mechanisms are proposed for the first time to elucidate the complex aggregation of GQDs. The first step is the protonation/deprotonation of GQDs under different pH values and the self-assembly of GQDs into GQD-water-GQD. The second step is the self-assembly of small GQD pieces into large plates (graphene oxide-like) induced by the coexisting Ca²⁺ and then conversion into 3D structures via π-π stacking. The third step is the aggregation of the 3D-assembled GQDs into precipitates via the suppression of the electric double layer. The self-assembly of GQDs prior to aggregation was supported by SEM and HRTEM imaging. Understanding of the colloidal behavior of ultrasmall nanoparticles like GQDs is significantly important for the precise prediction of their environmental fate and risk.

Preparation of zinc hydroxystannate-decorated graphene oxide nanohybrids and their synergistic reinforcement on reducing fire hazards of flexible poly (vinyl chloride)

A novel flame retardant, zinc hydroxystannate-decorated graphene oxide (ZHS/GO) nanohybrid, was successfully prepared and well characterized. Herein, the ZHS nanoparticles could not only enhance the flame retardancy of GO with the synergistic flame-retardant effect of ZHS but also prevent the restack of GO to improve the mechanical properties of poly (vinyl chloride) (PVC) matrix. The structure characterization showed ZHS nanoparticles were bonded onto the surface of GO nanosheets and the ZHS nanoparticles were well distributed on the surface of GO. Subsequently, resulting ZHS/GO was introduced into flexible PVC and fire hazards and mechanical properties of PVC nanocomposites were investigated. Compared to neat PVC, thermogravimetric analysis exhibited that the addition of ZHS/GO into PVC matrix led to an improvement of the charring amount and thermal stability of char residue. Moreover, the incorporation of 5 wt.% ZHS/GO imparted excellent flame retardancy to flexible PVC, as shown by increased limiting oxygen index, reduced peak heat release rate, and total heat release tested by an oxygen index meter and a cone calorimeter, respectively. In addition, the addition of ZHS/GO nanohybrids decreased the smoke products and increased the tensile strength of PVC. Above-excellent flame-retardant properties are generally attributed to the synergistic effect of GO and ZHS, containing good dispersion of ZHS/GO in PVC matrix, the physical barrier of GO, and the catalytic char function of ZHS.

Graphene-based nanosheets for delivery of chemotherapeutics and biological drugs

Graphene-based nanosheets (GNS), including graphenes, graphene oxides and reduced graphene oxides, have properties suitable for delivery of various molecules. With their two-dimensional structures, GNS provide relatively high surface areas and capacity for non-covalent π-π stacking and hydrophobic interactions with various drug molecules. Currently, GNS-based delivery applications extend to chemotherapeutics as well as biological drugs, including nucleic acid drugs, proteins, and peptides. Surfaces of GNS have been modified with various polymers, such as polyethylene glycol and biopolymers, which enhance biocompatibility and increase drug loading. Anticancer drugs are prominent among chemotherapeutic agents tested, and have been loaded onto GNS with relatively high loading capacities compared with other nanocarriers. For enhanced distribution to specific tissues, GNS have been covalently or non-covalently modified with targeting ligands, including folic acid, transferrins, and others. In this review, we cover the current status of GNS for delivery of anticancer chemotherapeutics and biological drugs, with a focus on nucleic acid drugs. Remaining challenges for the application of GNS for drug-delivery systems and future perspectives are also addressed.

Size-Controlled TiO(2) nanocrystals with exposed {001} and {101} facets strongly linking to graphene oxide via p-Phenylenediamine for efficient photocatalytic degradation of fulvic acids

Photocatalytic degradation is one of the most promising methods for removal of fulvic acids (FA), which is a typical category of natural organic contamination in groundwater. In this paper, TiO2/graphene nanocomposites (N-RGO/TiO2) were prepared via simple chemical functionalization and one-step hydrothermal method for efficient photodegradation of FA under illumination of a xenon lamp as light source. Here, p-phenylenediamine was used as not only the linkage chemical agent between TiO2 nanocrystals and graphene, but also the nitrogen dopant for TiO2 nanocrystals and graphene. During the hydrothermal process, facets of TiO2 nanocrystals were modulated with addition of HF, and sizes of TiO2 nanocrystals were controlled by the contents of graphene oxide functionalized with p-phenylenediamine (RGO-NH2). The obtained N-RGO/TiO2 nanocomposites exhibited a much higher photocatalytic activity and stability for degradation of methyl blue (MB) and FA compared with other TiO2 samples under xenon lamp irradiation. For the third cycle, the 10wt%N-RGO/TiO2 catalyst maintains high photoactivity (87%) for the degradation of FA, which is much better than the TiO2-N/F (61%) in 3h. This approach supplies a new strategy to design and synthesize metal oxide and graphene oxide nanocomposites with highly efficient photocatalytic performance.

Optimizing the Interactions of Surfactants with Graphitic Surfaces and Clathrate Hydrates

Surfactants are amphiphilic molecules active at the surface/interface and able to self-assemble. Because of these properties, surfactants have been extensively used as detergents, emulsifiers, foaming agents, and wetting agents. New perspectives have been opened by the exploitation of surfactants for their capacity to interact as well with simple molecules or surfaces. This feature article gives an overview of significant contributions in the panorama of the current research on surfactants, partly accomplished as well by our research group. We look at several recent applications (e.g., adsorption to graphitic surfaces and interactions with hydrate crystals) with the eye of physical organic chemists. We demonstrate that, from the detailed investigation of the forces involved in the interactions with hydrophobic surfaces, it is possible to optimize the design of the surfactant that is able to form a stable and unbundled carbon nanotube dispersion as well as the best exfoliating agent for graphitic surfaces. By studying the effect of different surfactants on the capacity to favor or disfavor the formation of a gas hydrate, it is possible to highlight the main features that a surfactant should possess in order to be devoted to that specific application.

Supramolecular self-assembly of graphene oxide and metal nanoparticles into stacked multilayers by means of a multitasking protein ring

Graphene oxide (GO) is rapidly emerging worldwide as a breakthrough precursor material for next-generation devices. However, this requires the transition of its two-dimensional layered structure into more accessible three-dimensional (3D) arrays. Peroxiredoxins (Prx) are a family of multitasking redox enzymes, self-assembling into ring-like architectures. Taking advantage of both their symmetric structure and function, 3D reduced GO-based composites are hereby built up. Results reveal that the "double-faced" Prx rings can adhere flat on single GO layers and partially reduce them by their sulfur-containing amino acids, driving their stacking into 3D multi-layer reduced GO-Prx composites. This process occurs in aqueous solution at a very low GO concentration, i.e. 0.2 mg ml(-1). Further, protein engineering allows the Prx ring to be enriched with metal binding sites inside its lumen. This feature is exploited to both capture presynthesized gold nanoparticles and grow in situ palladium nanoparticles paving the way to straightforward and "green" routes to 3D reduced GO-metal composite materials.

Base-Induced Liquid Crystals of Graphene Oxide for Preparing Elastic Graphene Foams with Long-Range Ordered Microstructures

Base-induced graphene oxide (GO) liquid crystals form a highly ordered texture. This microstructure can be inherited by graphene foams prepared by hydrothermal reduction, showing a long-range ordered microstructure of graphene sheets in 3D. This provides an insightful understanding into the supramolecular chemistry of GO sheets.

Ordered self-assembly of amphipathic graphene nanosheets into three-dimensional layered architectures

A novel layered graphene-based architecture is achieved via an ordered self-assembly process. Amphipathic graphene nanosheets are joined horizontally into large sheets via edge splicing, and a cross-linking agent of poly(vinyl alcohol) bridges them into integrated three-dimensional monoliths with tunable interlayer spacing. This layered architecture possesses highly ordered and favorable microchannels for molecular transfer.

Vertically aligned graphitic carbon nanosheet arrays fabricated from graphene oxides for supercapacitors and Li–O2 batteries

Vertically aligned graphitic carbon nanosheet arrays fabricated from graphene oxide by a facile and accessible method.

Facile synthesis of Pd/PDDA-GN/PMo11Co composite and its enhanced catalytic performance for formic acid oxidation

The PMo₁₁Co into the composite Pd/PDDA-GN/PMo₁₁Co contributes to converting intermediate species CO into CO₂ for formic acid oxidation.

Two-dimensional layered nanomaterials for gas-sensing applications

In this critical review, we mainly focus on the current developments of gas sensors based on typical 2D layered nanomaterials, including graphene, MoS₂, MoSe₂, WS₂, SnS₂, VS₂, black phosphorus (BP), h-BN, and g-C₃N₄.

3D-printed bioceramic scaffolds with a Fe3O4/graphene oxide nanocomposite interface for hyperthermia therapy of bone tumor cells

Magnetic scaffolds display prominent magnetothermal ability, and can effectively kill tumor cells in an alternating magnetic field and improve bone formation ability in vitro.