Responsive block copolymer photonics triggered by protein-polyelectrolyte coacervation

Responsive photonic hydrogel for colorimetric detection of formaldehyde

Formaldehyde (FA) can damage DNA, cause liver and kidney dysfunction, and ultimately lead to malignant tumors. Therefore, it is essential to develop a method that can conveniently detect FA with high detection sensitivity. Here, a responsive photonic hydrogel was prepared by embedding three-dimensional photonic crystal (PC) into amino-functionalized hydrogel to construct a colorimetric sensing film for FA. The amino groups on the polymer chains of the photonic hydrogel reacts with FA to increase the crosslinking density of the hydrogel, resulting in its volume shrinkage and a decrease in microsphere spacing of the PC. That causes the reflectance spectra blue-shift of more than 160 nm and color change from red to cyan for the optimized photonic hydrogel, achieving the sensitive, selective and colorimetric detection of FA. The constructed photonic hydrogel shows good accuracy and reliability for practical determination of FA in air and aquatic products, providing a new strategy for designing other target analytes responsive photonic hydrogels.

Interactive structural color displays of nano-architectonic 1-dimensional block copolymer photonic crystals: FOCUS ISSUE REVIEW

For changing environmental circumstances, interactive structural color (SC) observation is a promising strategy to store and express external information. SCs based on self-assembled block copolymer (BCP) photonic crystals have been a research focus due to their facile and diverse nanostructures relying on the volume ratio of blocks. Their unique nano-architectonics can reflect incident light due to constructive interference of the two different dielectric constituents. Their excellent ability to change nano-architectonics in response to external stimuli (i.e. humidity, temperature, pH, and mechanical force) allows for a programmable and stimuli-interactive BCP SC display. In this review, recent advances in programmable and stimuli-interactive SC displays with the 1-dimensional self-assembled BCP nano-architectonics are comprehensively discussed. First, this review focuses on the development of programmable BCP SCs that can store various information. Second, stimuli-interactive BCP SCs capable of responding reversibly to external stimuli are also addressed. Particularly, reversible BCP SC changes are suitable for rewritable displays and emerging human-interactive BCP SC displays that detect various human information through changes in electric signals with the simultaneous alteration of the BCP SCs. Based on previously reported literature, the current challenges in this research field are further discussed, and the perspective for future development is presented in terms of material, nano-architectonics, and process.

Coacervate microdroplet protocell-mediated gene transfection for nitric oxide production and induction of cell apoptosis

Liquid coacervate microdroplets have been widely explored as membrane-free compartment protocells for cargo delivery in therapeutic applications. In this study, coacervate protocells were developed as gene carriers for transfection of nitric oxide synthase (NOS) and overproduction of nitric oxide (NO) for killing of cancer cells. The coacervate microdroplet protocells were formed via the liquid-liquid phase separation of oppositely charged diethylaminoethyl-dextran/polyacrylic acids. The coacervate microdroplet protocells were found to facilitate gene transfection, which was demonstrated by cell imaging of the internalized coacervate microdroplets containing plasmids of enhanced green fluorescent protein. Due to their high transfection capability, the coacervate protocells were subsequently utilized for the delivery of NOS plasmids (pNOS). The cellular internalization of pNOS-containing coacervate carriers was found to result in high NOS expression coupled with NO overproduction, which then induced cell apoptosis and decreased cell viability. The cell apoptosis is associated with NO-mediated mitochondrial damage. The enhanced gene transfection was attributed to coacervate microdroplets' unique high sequestration capability and liquid-like fluidity. Overall, the incorporation of genes in coacervate microdroplets was demonstrated as a viable and novel strategy for the development of cargo biocarriers for biomedical applications.

Responsive Thin-Film Interference Colors from Polaronic Conjugated Block Copolymers

Colors responsive to the chemical environment can form the basis for simple and highly accessible diagnostic tools. Herein, the charge modulation of conjugated polymers is demonstrated as a new mechanism for chemically responsive structural colors based on thin-film interference. A liquid-liquid interfacial self-assembly is employed to create a conjugated block copolymer film that is flexible, transferable, and highly homogeneous in thickness over a large area. Gold (Au) complexes are introduced in the self-assembly process for in situ oxidation of conjugated polymers into a hole-polaronic state that renders the polymer film responsive to the chemical environment. When transferred onto a reflective substrate, the film shows thickness-dependent tunable reflective colors due to the optical interference. Furthermore, it experiences drastic changes in its dielectric behavior upon switching of the polaronic state, thereby enabling large modulations to the interferometric colors. Such responsive thin-film colors, in turn, can be used as a simple and intuitive multicolor readout for the recognition of reductive vapors including biological decomposition products.

Programmable and Chemically Fueled DNA Coacervates by Transient Liquid-Liquid Phase Separation

Multivalency-driven liquid-liquid phase separation (LLPS) is essential in biomolecular condensates to facilitate spatiotemporal regulation of biological functions. Providing programmable model systems would help to better understand the LLPS processes in biology, and furnish new types of compartmentalized synthetic reaction crucibles that exploit biological principles. Herein, we demonstrate a concept for programming LLPS using transient multivalency between ATP-driven sequence-defined functionalized nucleic acid polymers (SfNAPs), which serve as simple models for membrane-less organelles. The ATP-driven SfNAPs are transiently formed by an enzymatic reaction network (ERN) of concurrent ATP-powered DNA ligation and DNA restriction. The lifetimes can be programmed by the ATP concentration, which manifests on the LLPS length scale in tunable lifetimes for the all-DNA coacervates. Critically, the prominent programmability of the DNA-based building blocks allows to encode distinct molecular recognitions for multiple multivalent systems, enabling sorted LLPS and thus multicomponent DNA coacervates, reminiscent of the diverse membraneless organelles in biological systems. The ATP-driven coacervates are capable for multivalent trapping of micron-scale colloids and biomolecules to generate functions as emphasized for rate enhancements in enzymatic cascades. This work supports ATP-driven multivalent coacervation as a valuable mechanism for dynamic multicomponent and function biomolecular condensate mimics and for autonomous materials design in general.

Catalytic Biosensors from Complex Coacervate Core Micelle (C3M) Thin Films

Enzymes have been applied to a variety of industrially and medically relevant chemistries as both catalysts and sensors. Incorporation of proteins and enzymes into complex coacervates has been demonstrated to improve the thermal, chemical, and temporal stability of enzymes in solution. In this work, a neutral-cationic block copolymer and an enzyme, alkaline phosphatase, are incorporated into complex coacervate core micelles (C3Ms) and coated onto a solid substrate to create a biocatalytic film from aqueous solution. The incorporation of photo-cross-linkable groups into the neutral block of the polymer allows the film to be cross-linked under ultraviolet light, rendering it insoluble. The morphology of the film is shown to depend most strongly on the protein loading within the film, while solvent annealing is shown to have a minimal effect. These films are then demonstrated as specific sensors for Zn²⁺ in solution in the presence of other metals, a model reaction for ion-selective heavy metal biosensing useful in environmental monitoring. They are shown to have low leaching and maintain sufficient activity and response for sensing for 1 month after aging under ambient conditions and at 40 °C and 50% relative humidity. The C3M immobilization method demonstrated can be applied to a wide variety of proteins with minimal chemical or genetic modification and could be used for immobilization of charged macromolecules in general to produce a wide variety of thin-film devices.

Macro- and Microphase Separated Protein-Polyelectrolyte Complexes: Design Parameters and Current Progress

Protein-containing polyelectrolyte complexes (PECs) are a diverse class of materials, composed of two or more oppositely charged polyelectrolytes that condense and phase separate near overall charge neutrality. Such phase-separation can take on a variety of morphologies from macrophase separated liquid condensates, to solid precipitates, to monodispersed spherical micelles. In this review, we present an overview of recent advances in protein-containing PECs, with an overall goal of defining relevant design parameters for macro- and microphase separated PECs. For both classes of PECs, the influence of protein characteristics, such as surface charge and patchiness, co-polyelectrolyte characteristics, such as charge density and structure, and overall solution characteristics, such as salt concentration and pH, are considered. After overall design features are established, potential applications in food processing, biosensing, drug delivery, and protein purification are discussed and recent characterization techniques for protein-containing PECs are highlighted.

Interfacial properties of polymeric complex coacervates from simulation and theory

Polymeric complex coacervation occurs when two oppositely charged polyelectrolytes undergo an associative phase separation in aqueous salt solution, resulting in a polymer-dense coacervate phase and a polymer-dilute supernatant phase. This phase separation process represents a powerful way to tune polymer solutions using electrostatic attraction and is sensitive to environmental conditions such as salt concentration and valency. One area of particular research interest is using this to create nanoscale polymer assemblies, via (for example) block copolymers with coacervate-forming blocks. The key to understanding coacervate-driven assembly is the formation of the interface between the coacervate and supernatant phases and its corresponding thermodynamics. In this work, we use recent advances in coacervate simulation and theory to probe the nature of the coacervate-supernatant interface. First, we show that self-consistent field theory informed by either Monte-Carlo simulations or transfer matrix theories is capable of reproducing interfacial features present in large-scale molecular dynamics simulations. The quantitative agreement between all three methods gives us a way to efficiently explore interfacial thermodynamics. We show how salt affects the interface, and we find qualitative agreement with literature measurements of interfacial tension. We also explore the influence of neutral polymers, which we predict to drastically influence the phase behavior of coacervates. These neutral polymers can significantly alter the interfacial tension in coacervates; this has a profound effect on the design and understanding of coacervate-driven self-assembly, where the equilibrium structure is tied to interfacial properties.

Phase Separation Behavior of Supercharged Proteins and Polyelectrolytes

Membraneless organelles, like membrane-bound organelles, are essential to cell homeostasis and provide discrete cellular subcompartments. Unlike classical organelles, membraneless organelles possess no physical barrier but rather arise by phase separation of the organelle components from the surrounding cytoplasm or nucleoplasm. Complex coacervation, the liquid-liquid phase separation of oppositely charged polyelectrolytes, is one of several phenomena that are hypothesized to drive the formation and regulation of some membraneless organelles. Studies of the molecular properties of globular proteins that drive complex coacervation are limited as many proteins do not form complexes with oppositely charged macromolecules at neutral pH and moderate ionic strengths. Protein supercharging overcomes this problem and drives complexation with oppositely charged macromolecules. In this work, several distinct cationic supercharged green fluorescent protein (GFP) variants were designed to examine the phase behavior with oppositely charged polyanionic macromolecules. Cationic GFP variants phase separated with oppositely charged macromolecules at various mixing ratios, salt concentrations, and pH values. Efficient protein incorporation in the macromolecule rich phase occurred over a range of protein and polymer mass fractions, but the protein encapsulation efficiency was highest at the midpoint of the phase separation regime. More positively charged proteins phase separated over broader pH and salt ranges than those of proteins with a lower charge density. Interestingly, each GFP variant phase separated at higher salt concentrations with anionic synthetic macromolecules compared to anionic biological macromolecules. Optical microscopy revealed that most variants, depending on solution conditions, formed liquid-liquid phase separations, except for GFP/DNA pairs that formed solid aggregates under all tested conditions.

Printable and Rewritable Full Block Copolymer Structural Color

Structural colors (SCs) of photonic crystals (PCs) arise from selective constructive interference of incident light. Here, an ink-jet printable and rewritable block copolymer (BCP) SC display is demonstrated, which can be quickly written and erased over 50 times with resolution nearly equivalent to that obtained with a commercial office ink-jet printer. Moreover, the writing process employs an easily modified printer for position- and concentration-controlled deposition of a single, colorless, water-based ink containing a reversible crosslinking agent, ammonium persulfate. Deposition of the ink onto a self-assembled BCP PC film comprising a 1D stack of alternating layers enables differential swelling of the written BCP film and produces a full-colored SC display of characters and images. Furthermore, the information can be readily erased and the system can be reset by application of hydrogen bromide. Subsequently, new information can be rewritten, resulting in a chemically rewritable BCP SC display.

Dynamics of Charged Species in Ionic-Neutral Block Copolymer and Surfactant Complexes

Structure-property relationships of ionic block copolymer (BCP) surfactant complexes are critical toward the progress of favorable engineering design of efficient charge-transport materials. In this article, molecular dynamics simulations are used to understand the dynamics of charged-neutral BCP and surfactant complexes. The dynamics are examined for two different systems: charged-neutral double-hydrophilic and hydrophobic-hydrophilic block copolymers with oppositely charged surfactant moieties. The dynamics of the surfactant head, tails, and charges are studied for five different BCP volume fractions. We observe that the dynamics of the different species solely depend on the balance between electrostatic and entropic interactions between the charged species and the neutral monomers. The favorable hydrophobic-hydrophobic interactions and the unfavorable hydrophobic-hydrophilic interactions determine the mobilities of the monomers. The dynamical properties of the charge species influence complex formation. Structural relaxations exhibit length-scale dependent behavior, with slower relaxation at the radius of gyration length-scale and faster relaxation at the segmental length-scale, consistent with previous results. The dynamical analysis correlates ion-exchange kinetics to the self-assembly behavior of the complexes.

Photonic Devices Out of Equilibrium: Transient Memory, Signal Propagation, and Sensing

Soft photonic materials are important for sensors, displays, or energy management and have become switchable under static equilibrium conditions by integration of responsive polymer features. The next step is to equip such materials with the ability for autonomously dynamic and self-regulating behavior, which would advance their functionality and application possibilities to new levels. Here, this study shows the system integration of a nonlinear, biocatalytic pH-feedback system with a pH-responsive block copolymer photonic gel, and demonstrates autonomous transient memories, remotely controlled signal propagation, and sensing. This study utilizes an enzymatic switch to program the lifetime of the reflective state of a photonic gel, and induces propagation of pH-waves extinguishable by illumination with UV-light. The described combination of nonlinear chemistry and responsive photonic gels opens pathways toward out-of-equilibrium photonic devices with active and autonomous behavior useful for sensing, computation, and communication.

Development of the modern theory of polymeric complex coacervation

Oppositely charged polymers can undergo the process of complex coacervation, which refers to a liquid-liquid phase separation driven by electrostatic attraction. These materials have demonstrated considerable promise as the basis for complex, self-assembled materials. In this review, we provide a broad overview of the theoretical tools used to understand the physical properties of polymeric coacervates. In particular, we discuss historic theories (Voorn-Overbeek, Random Phase Approximation), and then describe recent developments in the field (Field Theoretic, Counterion Release, Molecular Simulation, and Polymer Reference Interaction Site Model methods). We provide context for these methods, and map out the patchwork of theoretical models that are used to describe a diverse array of coacervate systems. We use this review of the literature to clarify a number of important theoretical challenges remaining in our physical understanding of complex coacervation.

Short-range ordered photonic structures of lamellae-forming diblock copolymers for excitation-regulated fluorescence enhancement

Photonic crystals can be represented by periodic nanostructures with alternating refractive indices, which create artificial stop bands with the appearance of colors. In this regard, nanodomains of block copolymers and the corresponding structural colors have been intensively studied in the past. However, the practical application of photonic crystals of block copolymers has been limited to a large degree because of the presence of large defects and grain boundaries in the nanodomains of block copolymers. The present study focuses on the alternative opportunity of short-range ordered nanodomains of block copolymers for fluorescence enhancement, which also has a direct relevance to the development of fluorescence sensors or detectors. The enhancement mechanism was found to be interconnected with the excitation process rather than the alternation of the decay kinetics. In particular, we demonstrate that randomly oriented, but regular grains of lamellae of polystyrene-block-polyisoprene, PS-b-PI, diblock copolymers and their blend with PS homopolymers can behave as Bragg mirrors to induce multiple reflections of the excitation source inside the photonic structures. This process in turn significantly increases the effective absorption of the given fluorophores inside the polymeric photonic structures to amplify the fluorescence signal.

Electrically Tunable Soft-Solid Block Copolymer Structural Color

One-dimensional photonic crystals based on the periodic stacking of two different dielectric layers have been widely studied, but the fabrication of mechanically flexible polymer structural color (SC) films, with electro-active color switching, remains challenging. Here, we demonstrate free-standing electric field tunable ionic liquid (IL) swollen block copolymer (BCP) films. Placement of a polymer/ionic liquid film-reservoir adjacent to a self-assembled poly(styrene-block-quaternized 2-vinylpyridine) (PS-b-QP2VP) copolymer SC film allowed the development of red (R), green (G), and blue (B) full-color SC block copolymer films by swelling of the QP2VP domains by the ionic liquid associated with water molecules. The IL-polymer/BCP SC film is mechanically flexible with excellent color stability over several days at ambient conditions. The selective swelling of the QP2VP domains could be controlled by both the ratio of the IL to a polymer in the gel-like IL reservoir layer and by an applied voltage in the range of -3 to +6 V using a metal/IL reservoir/SC film/IL reservoir/metal capacitor type device.

Stereospecific catalytic precision polymerization of 2-vinylpyridine via rare earth metal-mediated group transfer polymerization with 2-methoxyethylamino-bis(phenolate)-yttrium complexes

C ₁-Symmetric 2-methoxyethylamino-bis(phenolate)-yttrium complexes for the stereospecific polymerization of 2-vinylpyridine.