Nanoscale chemical imaging of Bacillus subtilis spores by combining tip-enhanced Raman scattering and advanced statistical tools

Exploring Reliable and Efficient Plasmonic Nanopatterning for Surface- and Tip-Enhanced Raman Spectroscopies

Surface-enhanced Raman scattering (SERS) is of growing interest for a wide range of applications, especially for biomedical analysis, thanks to its sensitivity, specificity, and multiplexing capabilities. A crucial role for successful applications of SERS is played by the development of reproducible, efficient, and facile procedures for the fabrication of metal nanostructures (SERS substrates). Even more challenging is to extend the fabrication techniques of plasmonic nano-textures to atomic force microscope (AFM) probes to carry out tip-enhanced Raman spectroscopy (TERS) experiments, in which spatial resolution below the diffraction limit is added to the peculiarities of SERS. In this short review, we describe recent studies performed by our group during the last ten years in which novel nanofabrication techniques have been successfully applied to SERS and TERS experiments for studying bio-systems and molecular species of environmental interest.

Characterization of Hyaluronic Acid-Coated PLGA Nanoparticles by Surface-Enhanced Raman Spectroscopy

Nanoparticles (NPs) coated with hyaluronic acid (HA) seem to be increasingly promising for targeted therapy due to HA chemical versatility, which allows them to bind drugs of different natures, and their affinity with the transmembrane receptor CD-44, overexpressed in tumor cells. However, an essential aspect for clinical use of NPs is formulation stability over time. For these reasons, analytical techniques capable of characterizing their physico-chemical properties are needed. In this work, poly(lactide-co-glycolide) (PLGA) NPs with an average diameter of 100-150 nm, coated with a few 10 s of nm of HA, were synthesized. For stability characterization, two complementary investigative techniques were used: Dynamic Light Scattering (DLS) and Surface-Enhanced Raman Scattering (SERS) spectroscopy. The first technique provided information on size, polidispersity index, and zeta-potential, and the second provided a deeper insight on the NP surface chemicals, allowing distinguishing of HA-coated NPs from uncoated ones. Furthermore, in order to estimate formulation stability over time, NPs were measured and monitored for two weeks. SERS results showed a progressive decrease in the signal associated with HA, which, however, is not detectable by the DLS measurements.

Resolving the Subsurface Structure and Elastic Modulus of Layered Films via Contact Resonance Atomic Force Microscopy

Since its discovery, atomic force microscopy (AFM) has become widely used for surface characterization, evolving from a tool for probing surface topography to a versatile method for characterizing mechanical, electrical, chemical, magnetic, and electro-optical properties of surfaces at the nanoscale. Developments of several AFM-based techniques have enabled even subsurface imaging, which is routinely being carried out at the qualitative level of feature detection for localized subsurface inhomogeneities. We surmise, however, that a quantitative three-dimensional (3D) subsurface characterization can emerge from the AFM mechanical response of flat buried interfaces, and present here a methodology for determining the depth of a film and its mechanical properties. Using load-dependent contact resonance atomic force microscopy (CR-AFM) and accurate modeling of the contact between the AFM tip and a layered sample, we determine the relationship between the measured resonance frequency of the AFM probe and the contact stiffness. Our subsequent statistical analysis reveals an intrinsic and sample-specific interdependence between the depth and modulus sensitivities of CR-AFM. This interdependence prevents the simultaneous accurate determination of both depth and modulus from measurements on a single-layered sample. If the elastic moduli of the sample components are predetermined from separate investigations of bulk samples (or otherwise known), then this methodology accurately yields the location of the interface between the layers of the sample; as such, it can serve as a nondestructive and robust technique for probing layer thickness, subsurface features, and elastic properties of materials used in semiconductor electronics, additive manufacturing, or biomaterials.

New Insights into Cheese Microstructure

Microscopy is often used to assist the development of cheese products, but manufacturers can benefit from a much broader application of these techniques to assess structure formation during processing and structural changes during storage. Microscopy can be used to benchmark processes, optimize process variables, and identify critical control points for process control. Microscopy can also assist the reverse engineering of desired product properties and help troubleshoot production problems to improve cheese quality. This approach can be extended using quantitative analysis, which enables further comparisons between structural features and functional measures used within industry, such as cheese meltability, shreddability, and stretchability, potentially allowing prediction and control of these properties. This review covers advances in the analysis of cheese microstructure, including new techniques, and outlines how these can be applied to understand and improve cheese manufacture.

Nanoscale chemical characterization of biomolecules using tip-enhanced Raman spectroscopy

Nanoscale chemical and structural characterization of single biomolecules and assemblies is of paramount importance for applications in biology and medicine. It aims to describe the molecular structure of biomolecules and their interaction with unprecedented spatial resolution to better comprehend underlying molecular mechanisms of biological processes involved in cell activity and diseases. Tip-enhanced Raman scattering (TERS) spectroscopy appears particularly appealing to reach these objectives. This state-of-the-art TERS technique is as versatile as it is ultrasensitive. To perform a successful TERS experiment, special care and a thorough methodology for the preparation of the TERS system, the TERS probe tip, and sample are needed. Intense efforts have been deployed to characterize nucleic acids, proteins and peptides, lipid membranes, and more complex systems such as cells and viruses using TERS. Although the vast majority of studies have first been performed in dry conditions, they have allowed for several scientific breakthroughs. These include DNA and RNA sequencing, and the determination of relationships between protein structure and biological function by the use of increasingly exploitative chemometric tools for spectral data analysis. The nanoscale determination of the secondary structure of amyloid fibrils, protofibrils and oligomers implicated in neurodegenerative diseases could, for instance, be connected with the toxicity of these species, amyloid formation pathways, and their interaction with phospholipids. Single particles of different viral strains could be distinguished from one another by comparison of their protein and lipid contents. In addition, TERS has allowed for the evermore accurate description of the molecular organization of lipid membranes. Very recent advances also demonstrated the possibility to carry out TERS in aqueous medium, which opens thrilling perspectives for the TERS technique in biological, biomedical, and potential clinical applications.

Recent developments in Raman spectral analysis of microbial single cells: Techniques and applications

The conventional microbial cell analyses are mostly population-averaged methods that conceal the characteristics of single-cell in the community. Single-cell analysis can provide information on the functional and structural variation of each cell, resulting in the elimination of long and tedious microbial cultivation techniques. Raman spectroscopy is a label-free, noninvasive, and in-vivo method ideal for single-cell measurement to obtain spatially resolved chemical information. In the current review, recent developments in Raman spectroscopic techniques for microbial characterization at the single-cell level are presented, focusing on Raman imaging of single cells to study the intracellular distribution of different components. The review also discusses the limitation and challenges of each technique and put forward some future outlook for improving Raman spectroscopy-based techniques for single-cell analysis. Raman spectroscopic methods at the single-cell level have potential in precision measurements, metabolic analysis, antibiotic susceptibility testing, resuscitation capability, and correlating phenotypic information to genomics for cells, the integration of Raman spectroscopy with other techniques such as microfluidics, stable isotope probing (SIP), and atomic force microscope can further improve the resolution and provide extensive information. Future focuses should be given to advance algorithms for data analysis, standardized reference libraries, and automated cell isolation techniques in future.

Plasmonic nano-antimicrobials: properties, mechanisms and applications in microbe inactivation and sensing

Bacterial, viral and fungal infections pose serious threats to human health and well-being. The continuous emergence of acute infectious diseases caused by pathogenic microbes and the rapid development of resistances against conventional antimicrobial drugs necessitates the development of new and effective strategies for the safe elimination of microbes in water, food or on surfaces, as well as for the inactivation of pathogenic microbes in human hosts. The need for new antimicrobials has triggered the development of plasmonic nano-antimicrobials that facilitate both light-dependent and -independent microbe inactivation mechanisms. This review introduces the relevant photophysical mechanisms underlying these plasmonic nano-antimicrobials, and provides an overview of how the photoresponses and materials properties of plasmonic nanostructures can be applied in microbial pathogen inactivation and sensing applications. Through a systematic analysis of the inactivation efficacies of different plasmonic nanostructures, this review outlines the current state-of-the-art in plasmonic nano-antimicrobials and defines the application space for different microbial inactivation strategies. The advantageous optical properties of plasmonic nano-antimicrobials also enhance microbial detection and sensing modalities and thus help to avoid exposure to microbial pathogens. Sensitive and fast plasmonic microbial sensing modalities and their theranostic and targeted therapeutic applications are discussed.

Organometallic-Constructed Tip-Based Dual Chemical Sensing by Tip-Enhanced Raman Spectroscopy for Diabetes Detection

Tip-enhanced Raman spectroscopy (TERS) is capable of probing specific molecular information with high sensitivity, but dual chemical sensing remains a challenge. Another major hindrance to TERS chemical detection in biosamples such as blood is the interference from the strong absorptions of biomolecules. Herein, we report the preparation of an organometallic-conjugated TERS tip. We demonstrate that organometallic chemistry can be perfectly coupled with TERS for dual-molecule sensing. The unique Raman signals generated by the organometallic compound circumvent signal interference from the biomolecules in blood, allowing the rapid analysis of two important molecules (glucose and thiol) in ultralow volume (50 nL) samples. This enabled a correlation between the thiol and glucose levels in the blood of nondiabetic and diabetic patients to be drawn.

Controllable Fabrication of Au-Coated AFM Probes via a Wet-Chemistry Procedure

Tip-enhanced Raman spectroscopy (TERS), which offers a spatial resolution far beyond the limitations of the optical diffraction and detection sensitivity down to a single molecular level, has become one of the powerful techniques applied in current nanoscience and technology. However, the excellent performance of a TERS system is very much dependent on the quality of metallized probes used in TERS characterization. Thus, how to prepare higher-quality probes plays a vital role in the development and application of TERS technique. In this work, one simple wet-chemistry procedure was designed to fabricate atomic force microscopy-based TERS (AFM-TERS) probes. Through the controlled growth of a gold film on a commercial silicon AFM probe, TERS probes with different apex diameters were prepared successfully. A series of TERS results indicated that the probes with the apex size of 50~60 nm had the maximum TERS enhancement, and the Raman enhancement factor was in the range of 106 to 107. Compared with those prepared by other fabrication methods, our TERS probes fabricated by this wet-chemistry method have the virtues of good stability, high reproducibility, and strong enhancement effect.

Imaging the Microprocesses in Biofilm Matrices

Biofilms, which are aggregates of microorganisms and extracellular matrices, widely colonize natural water bodies, wastewater treatment systems, and body tissues, and have vital roles in water purification, biofouling, and infectious diseases. Recently, multiple imaging modalities have been developed to visualize the morphological structure and material distribution within biofilms and to probe the microprocesses in biofilm matrices, including biofilm formation, transfer and metabolism of substrates, and cell-cell communication. These technologies have improved our understanding of biofilm control and the fates of substrates in biofilms. In this review, we describe the principles of various imaging techniques and discuss the advantages and limitations of each approach to characterizing microprocesses in biofilm matrices.

Atomic Force Microscopy Based Tip-Enhanced Raman Spectroscopy in Biology

Most biological phenomena occur at the nanometer scale, which is not accessible by the conventional optical techniques because of the optical diffraction limitation. Tip-enhanced Raman spectroscopy (TERS), one of the burgeoning probing techniques, not only can provide the topography characterization with high resolution, but also can deliver the chemical or molecular information of a sample beyond the optical diffraction limitation. Therefore, it has been widely used in various structural analyses pertaining to materials science, tissue engineering, biological processes and so on. Based on the different feedback mechanisms, TERS can be classified into three types: atomic force microscopy based TERS system (AFM-TERS), scanning tunneling microscopy based TERS system (STM-TERS) and shear force microscopy based TERS system (SFM-TERS). Among them, AFM-TERS is the most widely adopted feedback system by live biosamples because it can work in liquid and this allows the investigation of biological molecules under native conditions. In this review, we mainly focus on the applications of AFM-TERS in three biological systems: nucleic acids, proteins and pathogens. From the TERS characterization to the data analysis, this review demonstrates that AFM-TERS has great potential applications to visually characterizing the biomolecular structure and crucially detecting more nano-chemical information of biological systems.

Tip-enhanced Raman spectroscopy - from early developments to recent advances

An analytical technique operating at the nanoscale must be flexible regarding variable experimental conditions while ideally also being highly specific, extremely sensitive, and spatially confined. In this respect, tip-enhanced Raman scattering (TERS) has been demonstrated to be ideally suited to, e.g., elucidating chemical reaction mechanisms, determining the distribution of components and identifying and localizing specific molecular structures at the nanometre scale. TERS combines the specificity of Raman spectroscopy with the high spatial resolution of scanning probe microscopies by utilizing plasmonic nanostructures to confine the incident electromagnetic field and increase it by many orders of magnitude. Consequently, molecular structure information in the optical near field that is inaccessible to other optical microscopy methods can be obtained. In this general review, the development of this still-young technique, from early experiments to recent achievements concerning inorganic, organic, and biological materials, is addressed. Accordingly, the technical developments necessary for stable and reliable AFM- and STM-based TERS experiments, together with the specific properties of the instruments under different conditions, are reviewed. The review also highlights selected experiments illustrating the capabilities of this emerging technique, the number of users of which has steadily increased since its inception in 2000. Finally, an assessment of the frontiers and new concepts of TERS, which aim towards rendering it a general and widely applicable technique that combines the highest possible lateral resolution and extreme sensitivity, is provided.

Surface-enhanced Raman spectroscopy: bottlenecks and future directions

This feature article discusses developmental bottleneck issues in surface Raman spectroscopy in its early stages and surface-enhanced Raman spectroscopy (SERS) in the past four decades and future perspectives.

Subnanometer-resolved chemical imaging via multivariate analysis of tip-enhanced Raman maps

Tip-enhanced Raman spectroscopy (TERS) is a powerful surface analysis technique that can provide subnanometer-resolved images of nanostructures with site-specific chemical fingerprints. However, due to the limitation of weak Raman signals and the resultant difficulty in achieving TERS imaging with good signal-to-noise ratios (SNRs), the conventional single-peak analysis is unsuitable for distinguishing complex molecular architectures at the subnanometer scale. Here we demonstrate that the combination of subnanometer-resolved TERS imaging and advanced multivariate analysis can provide an unbiased panoramic view of the chemical identity and spatial distribution of different molecules on surfaces, yielding high-quality chemical images despite limited SNRs in individual pixel-level spectra. This methodology allows us to exploit the full power of TERS imaging and unambiguously distinguish between adjacent molecules with a resolution of ~0.4 nm, as well as to resolve submolecular features and the differences in molecular adsorption configurations. Our results provide a promising methodology that promotes TERS imaging as a routine analytical technique for the analysis of complex nanostructures on surfaces.

Single-Molecule Imaging Using Atomistic Near-Field Tip-Enhanced Raman Spectroscopy

Advances in tip-enhanced Raman spectroscopy (TERS) have demonstrated ultrahigh spatial resolution so that the vibrational modes of individual molecules can be visualized. The spatial resolution of TERS is determined by the confinement of the plasmon-induced field in the junction; however, the conditions necessary for achieving the high spatial confinement required for imaging individual molecules are not fully understood. Here, we present a systematic theoretical study of TERS imaging of single molecules, using a hybrid atomistic electrodynamics-quantum mechanical method. This approach provides a consistent treatment of the molecule and the plasmonic near field under conditions where they cannot be treated separately. In our simulations, we demonstrate that TERS is capable of resolving intricate molecule vibrations with atomic resolution, although we find that TERS images are extremely sensitive to the near field in the junction. Achieving the atomic resolution requires the near field to be confined within a few ångstroms in diameter and the near-field focal plane to be in the molecule plane. Furthermore, we demonstrate that the traditional surface selection rule of Raman spectroscopy is altered due to the significant field confinement that leads to significant field-gradient effects in the Raman scattering. This work provides insights into single-molecule imaging based on TERS and Raman scattering of molecules in nanojunctions with atomic dimensions.

Raman-microscopy investigation of vitrification-induced structural damages in mature bovine oocytes

Although oocyte cryopreservation has great potentials in the field of reproductive technologies, it still is an open challenge in the majority of domestic animals and little is known on the biochemical transformation induced by this process in the different cellular compartments. Raman micro-spectroscopy allows the non-invasive evaluation of the molecular composition of cells, based on the inelastic scattering of laser photons by vibrating molecules. The aim of this work was to assess the biochemical modifications of both the zona pellucida and cytoplasm of vitrified/warmed in vitro matured bovine oocytes at different post-warming times. By taking advantage of Principal Component Analysis, we were able to shed light on the biochemical transformation induced by the cryogenic treatment, also pointing out the specific role of cryoprotective agents (CPs). Our results suggest that vitrification induces a transformation of the protein secondary structure from the α-helices to the β-sheet form, while lipids tend to assume a more packed configuration in the zona pellucida. Both modifications result in a mechanical hardening of this cellular compartment, which could account for the reduced fertility rates of vitrified oocytes. Furthermore, biochemical modifications were observed at the cytoplasmic level in the protein secondary structure, with α-helices loss, suggesting cold protein denaturation. In addition, a decrease of lipid unsaturation was found in vitrified oocytes, suggesting oxidative damages. Interestingly, most modifications were not observed in oocytes exposed to CPs, suggesting that they do not severely affect the biochemical architecture of the oocyte. Nevertheless, in oocytes exposed to CPs decreased developmental competence and increased reactive oxygen species production were observed compared to the control. A more severe reduction of cleavage and blastocyst rates after in vitro fertilization was obtained from vitrified oocytes. Our experimental outcomes also suggest a certain degree of reversibility of the induced transformations, which renders vitrified oocytes more similar to untreated cells after 2 h warming.

Vibrational Spectroscopy for Imaging Single Microbial Cells in Complex Biological Samples

Vibrational spectroscopy is increasingly used for the rapid and non-destructive imaging of environmental and medical samples. Both Raman and Fourier-transform infrared (FT-IR) imaging have been applied to obtain detailed information on the chemical composition of biological materials, ranging from single microbial cells to tissues. Due to its compatibility with methods such as stable isotope labeling for the monitoring of cellular activities, vibrational spectroscopy also holds considerable power as a tool in microbial ecology. Chemical imaging of undisturbed biological systems (such as live cells in their native habitats) presents unique challenges due to the physical and chemical complexity of the samples, potential for spectral interference, and frequent need for real-time measurements. This Mini Review provides a critical synthesis of recent applications of Raman and FT-IR spectroscopy for characterizing complex biological samples, with a focus on developments in single-cell imaging. We also discuss how new spectroscopic methods could be used to overcome current limitations of single-cell analyses. Given the inherent complementarity of Raman and FT-IR spectroscopic methods, we discuss how combining these approaches could enable us to obtain new insights into biological activities either in situ or under conditions that simulate selected properties of the natural environment.

Optical Biosensing of Bacteria and Bacterial Communities

Bacterial sensing is important for understanding the numerous roles bacteria play in nature and in technology, understanding and managing bacterial populations, detecting pathogenic bacterial infections, and preventing the outbreak of illness. Current analytical challenges in bacterial sensing center on the dilemma of rapidly acquiring quantitative information about bacteria with high detection efficiency, sensitivity, and specificity, while operating within a reasonable budget and optimizing the use of ancillary tools, such as multivariate statistics. This review starts from a general description of bacterial sensing methods and challenges, and then focuses on bacterial characterization using optical methods including Raman spectroscopy and imaging, infrared spectroscopy, fluorescence spectroscopy and imaging, and plasmonics, including both extended and localized surface plasmon resonance spectroscopy. The advantages and drawbacks of each method in relation to the others are discussed, as are their applications. A particularly promising direction in bacterial sensing lies in combining multiple approaches to achieve multiplex analysis, and examples where this has been achieved are highlighted.

Internal Hydration Properties of Single Bacterial Endospores Probed by Electrostatic Force Microscopy

We show that the internal hydration properties of single Bacillus cereus endospores in air under different relative humidity (RH) conditions can be determined through the measurement of its electric permittivity by means of quantitative electrostatic force microscopy (EFM). We show that an increase in the RH from 0% to 80% induces a large increase in the equivalent homogeneous relative electric permittivity of the bacterial endospores, from ∼4 up to ∼17, accompanied only by a small increase in the endospore height, of just a few nanometers. These results correlate the increase of the moisture content of the endospore with the corresponding increase of environmental RH. Three-dimensional finite element numerical calculations, which include the internal structure of the endospores, indicate that the moisture is mainly accumulated in the external layers of the endospore, hence preserving the core of the endospore at low hydration levels. This mechanism is different from what we observe for vegetative bacterial cells of the same species, in which the cell wall at high humid atmospheric conditions is not able to preserve the cytoplasmic region at low hydration levels. These results show the potential of quantitative EFM under environmental humidity control to study the hygroscopic properties of small-scale biological (and nonbiological) entities and to determine its internal hydration state. A better understanding of nanohygroscopic properties can be of relevance in the study of essential biological processes and in the design of bionanotechnological applications.

The Exosporium of Bacillus megaterium QM B1551 Is Permeable to the Red Fluorescence Protein of the Coral Discosoma sp

Bacterial spores spontaneously interact and tightly bind heterologous proteins. A variety of antigens and enzymes have been efficiently displayed on spores of Bacillus subtilis, the model system for spore formers. Adsorption on B. subtilis spores has then been proposed as a non-recombinant approach for the development of mucosal vaccine/drug delivery vehicles, biocatalysts, bioremediation, and diagnostic tools. We used spores of B. megaterium QM B1551 to evaluate their efficiency as an adsorption platform. Spores of B. megaterium are significantly larger than those of B. subtilis and of other Bacillus species and are surrounded by the exosporium, an outermost surface layer present only in some Bacillus species and lacking in B. subtilis. Strain QM B1551 of B. megaterium and a derivative strain totally lacking the exosporium were used to localize the adsorbed monomeric Red Fluorescent Protein (mRFP) of the coral Discosoma sp., used as a model heterologous protein. Our results indicate that spores of B. megaterium adsorb mRFP more efficiently than B. subtilis spores, that the exosporium is essential for mRFP adsorption, and that most of the adsorbed mRFP molecules are not exposed on the spore surface but rather localized in the space between the outer coat and the exosporium.

Plasmonically Engineered Nanoprobes for Biomedical Applications

The localized surface plasmon resonance of metal nanoparticles is the collective oscillation of electrons on particle surface, induced by incident light, and is a particle composition-, morphology-, and coupling-dependent property. Plasmonic engineering deals with highly precise formation of the targeted nanostructures with targeted plasmonic properties (e.g., electromagnetic field distribution and enhancement) via controlled synthetic, assembling, and atomic/molecular tuning strategies. These plasmonically engineered nanoprobes (PENs) have a variety of unique and beneficial physical, chemical, and biological properties, including optical signal enhancement, catalytic, and local temperature-tuning photothermal properties. In particular, for biomedical applications, there are many useful properties from PENs including LSPR-based sensing, surface-enhanced Raman scattering, metal-enhanced fluorescence, dark-field light-scattering, metal-mediated fluorescence resonance energy transfer, photothermal effect, photodynamic effect, photoacoustic effect, and plasmon-induced circular dichroism. These properties can be utilized for the development of new biotechnologies and biosensing, bioimaging, therapeutic, and theranostic applications in medicine. This Perspective introduces the concept of plasmonic engineering in designing and synthesizing PENs for biomedical applications, gives recent examples of biomedically functional PENs, and discusses the issues and future prospects of PENs for practical applications in bioscience, biotechnology, and medicine.

Localization of a red fluorescence protein adsorbed on wild type and mutant spores of Bacillus subtilis

BACKGROUND

Bacterial spores have been proposed as vehicles to display heterologous proteins for the development of mucosal vaccines, biocatalysts, bioremediation and diagnostic tools. Two approaches have been developed to display proteins on the spore surface: a recombinant approach, based on the construction of gene fusions between DNA molecules coding for a spore surface protein (carrier) and for the heterologous protein to be displayed (passenger); and a non-recombinant approach based on spore adsorption, a spontaneous interaction between negatively charged, hydrophobic spores and purified proteins. The molecular details of spore adsorption have not been fully clarified yet.

RESULTS

We used the monomeric Red Fluorescent Protein (mRFP) of the coral Discosoma sp. and Bacillus subtilis spores of a wild type and an isogenic mutant strain lacking the CotH protein to clarify the adsorption process. Mutant spores, characterized by a strongly altered coat, were more efficient than wild type spores in adsorbing mRFP but the interaction was less stable and mRFP could be in part released by raising the pH of the spore suspension. A collection of isogenic strains carrying GFP fused to proteins restricted in different compartments of the B. subtilis spore was used to localize adsorbed mRFP molecules. In wild type spores mRFP infiltrated through crust and outer coat, localized in the inner coat and was not surface exposed. In mutant spores mRFP was present in all surface layers, inner, outer coat and crust and was exposed on the spore surface.

CONCLUSIONS

Our results indicate that different spores can be selected for different applications. Wild type spores are preferable when a very tight protein-spore interaction is needed, for example to develop reusable biocatalysts or bioremediation systems for field applications. cotH mutant spores are instead preferable when the heterologous protein has to be displayed on the spore surface or has to be released, as could be the case in mucosal delivery systems for antigens and drugs, respectively.

Nanometal Skin of Plasmonic Heterostructures for Highly Efficient Near-Field Scattering Probes

In this work, atomic force microscopy probes are functionalized by virtue of self-assembling monolayers of block copolymer (BCP) micelles loaded either with clusters of silver nanoparticles or bimetallic heterostructures consisting of mixed species of silver and gold nanoparticles. The resulting self-organized patterns allow coating the tips with a sort of nanometal skin made of geometrically confined nanoislands. This approach favors the reproducible engineering and tuning of the plasmonic properties of the resulting structured tip by varying the nanometal loading of the micelles. The newly conceived tips are applied for experiments of tip-enhanced Raman scattering (TERS) spectroscopy and scattering-type scanning near-field optical microscopy (s-SNOM). TERS and s-SNOM probe characterizations on several standard Raman analytes and patterned nanostructures demonstrate excellent enhancement factor with the possibility of fast scanning and spatial resolution <12 nm. In fact, each metal nanoisland consists of a multiscale heterostructure that favors large scattering and near-field amplification. Then, we verify the tips to allow challenging nongap-TER spectroscopy on thick biosamples. Our approach introduces a synergistic chemical functionalization of the tips for versatile inclusion and delivery of plasmonic nanoparticles at the tip apex, which may promote the tuning of the plasmonic properties, a large enhancement, and the possibility of adding new degrees of freedom for tip functionalization.

Dark spots along slowly scaling chains of plasmonic nanoparticles

We numerically investigate the optical response of slowly scaling linear chains of mismatched silver nanoparticles. Hybridized plasmon chain resonances manifest unusual local field distributions around the nanoparticles that result from symmetry breaking of the geometry. Importantly, we find localization patterns characterized by bright hot-spots alternated by what we term dark spots. A dark spot is associated to dark plasmons that have collinear and antiparallel dipole moments along the chain. As a result, the field amplification in the dark interjunction gap is extinguished for incident polarization parallel to the chain axis. Despite the strong plasmonic coupling, the nanoparticles on the sides of this dark gap experience a dramatic asymmetric field amplification with amplitude gain contrast > 2×10². Remarkably, also for polarization orthogonal to the axis, gap hot-spots form on resonance.

Assessment of conjunctival microvilli abnormality by micro-Raman analysis - by G. Rusciano et al

Conjunctival microvilli are microscopic cellular membrane protrusions on apical epithelial cells, which increase the surface area available for tear adherence. Pathological alterations of microvilli structure affect the tear film stability and, conversely, dysfunctions of tear film composition can lead to a suffering epithelium (dry-eye syndrome). In this work we propose the use of micro-Raman analysis to reveal conjunctival microvilli abnormalities. Samples were obtained by impression cytology from patients by different stage of dry-eye syndrome. Our experimental outcomes demonstrate that Raman analysis, combined with the use of Principal Component Analysis, is able to detect different stages of microvilli reduction. Globally, these results hold promise for the use of Raman analysis for an objective, effective, non-invasive and potentially also in-vivo analysis of the conjunctiva in all the cases of microvilli-related ocular pathologies.

Near-field absorption imaging by a Raman nano-light source

We demonstrate nano-scale absorption imaging by using a novel Raman light source.

Tip-enhanced Raman scattering--Targeting structure-specific surface characterization for biomedical samples

Tip-enhanced Raman scattering (TERS) has become a powerful tool for nanoscale structural analysis for several branches of organic, inorganic, and biological chemistry. This highly sensitive technique enables molecular characterization with a lateral resolution far beyond Abbe's diffraction limit and correlates structural and topographic information on a nanometer scale. In this review, the current experimental concepts with respect to their strengths and obstacles are introduced and discussed. A further focus was set to biochemistry comprising applications like nucleic acids, proteins, and microorganisms, thus demonstrating the potential use towards the pharmaceutically relevant challenges where nanometer resolution is required.

Surface-enhanced Raman imaging of cell membrane by a highly homogeneous and isotropic silver nanostructure

Label-free chemical imaging of live cell membranes can shed light on the molecular basis of cell membrane functionalities and their alterations under membrane-related diseases. In principle, this can be done by surface-enhanced Raman scattering (SERS) in confocal microscopy, but requires engineering plasmonic architectures with a spatially invariant SERS enhancement factor G(x, y) = G. To this end, we exploit a self-assembled isotropic nanostructure with characteristics of homogeneity typical of the so-called near-hyperuniform disorder. The resulting highly dense, homogeneous and isotropic random pattern consists of clusters of silver nanoparticles with limited size dispersion. This nanostructure brings together several advantages: very large hot spot density (∼10(4) μm(-2)), superior spatial reproducibility (SD < 1% over 2500 μm(2)) and single-molecule sensitivity (Gav ∼ 10(9)), all on a centimeter scale transparent active area. We are able to reconstruct the label-free SERS-based chemical map of live cell membranes with confocal resolution. In particular, SERS imaging is here demonstrated on red blood cells in vitro in order to use the Raman-resonant heme of the cell as a contrast medium to prove spectroscopic detection of membrane molecules. Numerical simulations also clarify the SERS characteristics of the substrate in terms of electromagnetic enhancement and distance sensitivity range consistently with the experiments. The large SERS-active area is intended for multi-cellular imaging on the same substrate, which is important for spectroscopic comparative analysis of complex organisms like cells. This opens new routes for in situ quantitative surface analysis and dynamic probing of living cells exposed to membrane-targeting drugs.

Toward hyperuniform disordered plasmonic nanostructures for reproducible surface-enhanced Raman spectroscopy

We report on the self-assembling of clusters of gold-nanoparticles (Au-NPs) directed by the phase separation of poly(styrene)-b-poly(methylmethacrylate) (PS-b-PMMA) block-copolymer (BCP) on indium tin oxide coated glass, which induces the onset of vertical lamellar domains. After thermal evaporation of gold on BCP, Au-NPs of 4 nm are selectively included into PS-nanodomains by thermal annealing, and then clustered with large density of hot spots (> 10(4) μm(2)) in a random two-dimensional pattern. The resulting nanostructure exhibits near-hyperuniform long-range correlations. The consequent large degree of homogeneity of this isotropic plasmonic pattern gives rise to a highly reproducible Surface-Enhanced Raman Scattering (SERS) enhancement factor over the centimeter scale (std. dev. ∼ 10% over 0.25 cm(2)). We also discuss the application of a static electric field for modulating the BCP host morphology. The electric field induces an alignment of Au-NP clusters into ordered linear chains, exhibiting a stronger SERS activity, but reduced SERS spatial reproducibility.

Simultaneous measurements of electrophoretic and dielectrophoretic forces using optical tweezers

Herein, charged microbeads handled with optical tweezers are used as a sensitive probe for simultaneous measurements of electrophoretic and dielectrophoretic forces. We first determine the electric charge carried by a single bead by keeping it in a predictable uniform electric field produced by two parallel planar electrodes, then, we examine same bead's response in proximity to a tip electrode. In this case, besides electric forces, the bead simultaneously experiences non-negligible dielectrophoretic forces produced by the strong electric field gradient. The stochastic and deterministic motions of the trapped bead are theoretically and experimentally analysed in terms of the autocorrelation function. By fitting the experimental data, we are able to extract simultaneously the spatial distribution of electrophoretic and dielectrophoretic forces around the tip. Our approach can be used for determining actual, total force components in the presence of high-curvature electrodes or metal scanning probe tips.