Large-strain, multiform movements from designable electrothermal actuators based on large highly anisotropic carbon nanotube sheets

Triple-Responsive Soft Actuator with Plastically Retentive Deformation and Magnetically Programmable Recovery

Multistimuli responsiveness and programmable shape recovery are crucial for soft actuators in soft robotics, electronics, and wearables. However, existing strategies for actuation cannot attain power-free shape retention after removing the external energy supply. Here, a self-assembled density deposition method was developed to fabricate an electrothermal-NIR-magnetic triple-response actuator which was composed of cellulose nanofiber/poly(vinyl alcohol)/liquid metal (CNF/PVA/LM) and magnetic polydimethylsiloxane (MPDMS) layer. Interestingly, the large deformation can be controllably fixed and the temporary configuration will be programmable recovered under a magnetic field due to the thermal-plastic transferring behavior of the CNF/PVA/LM. Rolling robot prepared based on soft actuators exhibits good ability to avoid obstacles. In addition, the object handling and programmable release capabilities of the carrier robots demonstrate that this actuation approach will contribute to a better understanding of how to more rationally utilize various stimuli for application purposes.

Microfluidic Approaches for Microactuators: From Fabrication, Actuation, to Functionalization

Microactuators can autonomously convert external energy into specific mechanical motions. With the feature sizes varying from the micrometer to millimeter scale, microactuators offer many operation and control possibilities for miniaturized devices. In recent years, advanced microfluidic techniques have revolutionized the fabrication, actuation, and functionalization of microactuators. Microfluidics can not only facilitate fabrication with continuously changing materials but also deliver various signals to stimulate the microactuators as desired, and consequently improve microfluidic chips with multiple functions. Herein, this cross-field that systematically correlates microactuator properties and microfluidic functions is comprehensively reviewed. The fabrication strategies are classified into two types according to the flow state of the microfluids: stop-flow and continuous-flow prototyping. The working mechanism of microactuators in microfluidic chips is discussed in detail. Finally, the applications of microactuator-enriched functional chips, which include tunable imaging devices, micromanipulation tools, micromotors, and microsensors, are summarized. The existing challenges and future perspectives are also discussed. It is believed that with the rapid progress of this cutting-edge field, intelligent microsystems may realize high-throughput manipulation, characterization, and analysis of tiny objects and find broad applications in various fields, such as tissue engineering, micro/nanorobotics, and analytical devices.

Thermally Drawn Elastomer Nanocomposites for Soft Mechanical Sensors

Stretchable and conductive nanocomposites are emerging as important constituents of soft mechanical sensors for health monitoring, human-machine interactions, and soft robotics. However, tuning the materials' properties and sensor structures to the targeted mode and range of mechanical stimulation is limited by current fabrication approaches, particularly in scalable polymer melt techniques. Here, thermoplastic elastomer-based nanocomposites are engineered and novel rheological requirements are proposed for their compatibility with fiber processing technologies, yielding meters-long, soft, and highly versatile stretchable fiber devices. Based on microstructural changes in the nanofiller arrangement, the resistivity of the nanocomposite is tailored in its final device architecture across an entire order of magnitude as well as its sensitivity to strain via tuning thermal drawing processing parameters alone. Moreover, the prescribed electrical properties are coupled with suitable device designs and several fiber-based sensors are proposed aimed at specific types of deformations: i) a robotic fiber with an integrated bending mechanism where changes as small as 5° are monitored by piezoresistive nanocomposite elements, ii) a pressure-sensing fiber based on a geometrically controlled resistive signal that responds with a sub-newton resolution to changes in pressing forces, and iii) a strain-sensing fiber that tracks changes in capacitance up to 100% elongation.

Ultrafast Photothermal Actuators with a Large Helical Curvature Based on Ultrathin GO and Biaxially Oriented PE Films

In nature, there are some amazing superfast actuations (Venus flytrap) and large-curvature helical deformations (the awn of Erodium). Although many bionic actuators have been made (electrothermal, hygroscopic, photoinduced), most of their actuations are slow and small, not comparable to the wonderful ones in nature. Here, we report an ultrafast photothermal actuator with large-curvature curling based on an ultrathin graphene oxide (GO) and biaxially oriented polyethylene (BOPE) bilayer film (thickness ∼11 μm). By virtue of the fast temperature changing rate (peak: 900 °C s^-1 during infrared heating and -1200 °C s^-1 during cooling) and the great difference in the coefficient of thermal expansion of GO and BOPE layers, the actuator deforms rapidly and greatly. The maximum bending speed and curvature can reach 5300° s^-1 and 22 cm^-1, respectively, which are comparable to those of wonderful natural actuators and far exceed the performances of the reported artificial actuators. Different from ordinary helical actuators made of uniaxial anisotropic materials, our actuator is based on a typical biaxial anisotropic material of BOPE. However, the morphing behaviors of this type of actuator have not been reported before. So for the first time, we systematically studied this problem through experiments and simulations using the GO-BOPE actuator as a prototype and have drawn clear conclusions. In addition, functional GO-BOPE actuators capable of winding around and manipulating tiny objects were also designed and developed. We think this ultrafast large-curvature photothermal actuator will have wide application prospects in bionic actuations and dexterous robots.

Electrically driven liquid crystal network actuators

Soft actuators based on liquid crystal networks (LCNs) have aroused great scientific interest for use as stimuli-controlled shape-changing and moving components for robotic devices due to their fast, large, programmable and solvent-free actuation responses. Recently, various LCN actuators have been implemented in soft robotics using stimulus sources such as heat, light, humidity and chemical reactions. Among them, electrically driven LCN actuators allow easy modulation and programming of the input electrical signals (amplitude, phase, and frequency) as well as stimulation throughout the volume, rendering them promising actuators for practical applications. Herein, the progress of electrically driven LCN actuators regarding their construction, actuation mechanisms, actuation performance, actuation programmability and the design strategies for intelligent systems is elucidated. We also discuss new robotic functions and advanced actuation control. Finally, an outlook is provided, highlighting the research challenges faced with this type of actuator.

Multiresponsive Ti3C2Tx MXene-Based Actuators Enabled by Dual-Mechanism Synergism for Soft Robotics

Multiresponsive and high-performance flexible actuators with a simple configuration, high mechanical strength, and low-power consumption are highly desirable for soft robotics. Here, a novel mechanically robust and multiresponsive Ti₃C₂T_x MXene-based actuator with high actuation performance via dual-mechanism synergistic effect driven by the hygroexpansion of bacterial cellulose (BC) layer and the thermal expansion of biaxially oriented polypropylene (BOPP) layer is developed. The actuator is flexible and shows an ultrahigh tensile strength of 195 MPa. Unlike the conventional bimorph-structured actuators based on a single-mechanism, the actuator developed provides a favorable architecture for dual-mechanism synergism, resulting in exceptionally reversible actuation performance under electricity and near-infrared (NIR) light stimuli. Typically, the developed actuator can produce the largest bending angle (∼400°) at the lowest voltage (≤4 V) compared with that reported previously for single mechanism soft actuators. Furthermore, the actuator also can be driven by a NIR light at a 2 m distance, displaying an excellent long-distance photoresponsive property. Finally, various intriguing applications are demonstrated to show the great potential of the actuator for soft robotics.

Graphene-Based Moisture Actuator with Oriented Microstructures Prepared by One-Step Laser Reduction for Accurately Controllable Responsive Direction and Position

Actuators with fast and precise controllable responses are highly in demand for implementing agilely accurate mechanical movements in smart robots, intelligent sensors, biomimetic devices, and so on. Here, we report a graphene-based moisture actuator with accurately controllable direction and position responses achieved by a fast, controlled, and even programmable one-step laser reduction method. The laser reduction-induced oriented microstructures help to precisely guide the direction and location of the moisture response in graphene-based Janus films. The excellent moisture-mechanical response behaviors in these novel moisture actuators originate from the Janus structures and the periodic microstructures of a line-scanned layer. Our customized complex intelligent devices such as drums, bands, and three-dimensional wave humidity drives can highly match and verify the finite element simulations, which will inspire the creation of further smart robot designs for accurate deformation.

A unimorph nanocomposite dielectric elastomer for large out-of-plane actuation

Dielectric elastomer actuators (DEAs) feature large, reversible in-plane deformation, and stacked DEA layers are used to produce large strokes in the thickness dimension. We introduce an electrophoretic process to concentrate boron nitride nanosheet dispersion in a dielectric elastomer precursor solution onto a designated electrode surface. The resulting unimorph nanocomposite dielectric elastomer (UNDE) has a seamless bilayer structure with 13 times of modulus difference. The UNDE can be actuated to large bending curvatures, with enhanced breakdown field strength and durability as compared to conventional nanocomposite dielectric elastomer. Multiple UNDE units can be formed in a simple electrophoretic concentration process using patterned electrode areas. A disc-shaped actuator comprising six UNDE units outputs large bidirectional stroke up to 10 Hz. This actuator is used to demonstrate a high-speed lens motor capable of varying the focal length of a two-lens system by 40 times.

A NIR-Light-Driven Twisted and Coiled Polymer Actuator with a PEDOT-Tos/Nylon-6 Composite for Durable and Remotely Controllable Artificial Muscle

In this paper, we proposed a novel light-driven polymer actuator that could produce remotely controllable tensile stroke in response to near infrared (NIR) light. The light-driven polymer actuator was composed of a twisted and coiled nylon-6 fiber (TCN) and a thin poly(3,4-ethylenedioxythiophene) doped with p-toluenesulfonate (PEDOT-Tos) layer. By adopting dip-coating methodology with thermal polymerization process, we constructed a thin and uniform PEDOT-Tos layer on the surface of the three-dimensional TCN structure. Thanks to the PEDOT-Tos layer with excellent NIR light absorption characteristic, the NIR light illumination via a small LEDs array allowed the multiple PEDOT-Tos coated TCN actuators to be photo-thermally heated to a fairly consistent temperature and to simultaneously produce a contractile strain that could be modulated as high as 8.7% with light power. The actuation performance was reversible without any significant hysteresis and highly durable during 3000 cyclic operations via repetitive control of the LEDs. Together with its simple structure and facile fabrication, the light-driven actuator can lead to technical advances in artificial muscles due to its attractive benefits from remote controllability without complex coupled instruments and electromagnetic interference.

Programmable Sensitivity Screening of Strain Sensors by Local Electrical and Mechanical Properties Coupling

Owing to the canonical trade-off between the gauge factor and the working range, there is an emergent need for strain sensors with customizable sensitivity for various applications of different deformation ranges. However, current optimization strategies typically allow possessing either, not both, high-sensing performance or customizable sensing performance. Here, a laser-programmed heterogeneous strain sensor featured locally coupled electrical and mechanical properties (named an LCoup sensor) is developed to access customized sensor performance. Coupled electromechanical properties enable the applied strain to be mainly experienced by the higher sensitivity regions when stretched. By optimizing the parameters of laser processes, the gauge factor can systematically screen within 2 orders of magnitude (from 7.8 to 266.6) while maintaining good stretchability (50%). To prove the potential in human-machine interaction, the real-time monitoring and recognition of set hand gestures (left-click, right-click, and double-click) are demonstrated, representing the traditional input patterns of the computer mouse. Multiscale programming of material properties can further achieve excellent and tailored device performances, offering more opportunities for the design of a broad range of flexible electronics.

Directional, Low-Energy Driven Thermal Actuating Bilayer Enabled by Coordinated Submolecular Switching

The authors reveal a thermal actuating bilayer that undergoes reversible deformation in response to low-energy thermal stimuli, for example, a few degrees of temperature increase. It is made of an aligned carbon nanotube (CNT) sheet covalently connected to a polymer layer in which dibenzocycloocta-1,5-diene (DBCOD) actuating units are oriented parallel to CNTs. Upon exposure to low-energy thermal stimulation, coordinated submolecular-level conformational changes of DBCODs result in macroscopic thermal contraction. This unique thermal contraction offers distinct advantages. It's inherently fast, repeatable, low-energy driven, and medium independent. The covalent interface and reversible nature of the conformational change bestow this bilayer with excellent repeatability, up to at least 70 000 cycles. Unlike conventional CNT bilayer systems, this system can achieve high precision actuation readily and can be scaled down to nanoscale. A new platform made of poly(vinylidene fluoride) (PVDF) in tandem with the bilayer can harvest low-grade thermal energy and convert it into electricity. The platform produces 86 times greater energy than PVDF alone upon exposure to 6 °C thermal fluctuations above room temperature. This platform provides a pathway to low-grade thermal energy harvesting. It also enables low-energy driven thermal artificial robotics, ultrasensitive thermal sensors, and remote controlled near infrared (NIR) driven actuators.

Electro-responsive actuators based on graphene

Electro-responsive actuators (ERAs) hold great promise for cutting-edge applications in e-skins, soft robots, unmanned flight, and in vivo surgery devices due to the advantages of fast response, precise control, programmable deformation, and the ease of integration with control circuits. Recently, considering the excellent physical/chemical/mechanical properties (e.g., high carrier mobility, strong mechanical strength, outstanding thermal conductivity, high specific surface area, flexibility, and transparency), graphene and its derivatives have emerged as an appealing material in developing ERAs. In this review, we have summarized the recent advances in graphene-based ERAs. Typical the working mechanisms of graphene ERAs have been introduced. Design principles and working performance of three typical types of graphene ERAs (e.g., electrostatic actuators, electrothermal actuators, and ionic actuators) have been comprehensively summarized. Besides, emerging applications of graphene ERAs, including artificial muscles, bionic robots, human-soft actuators interaction, and other smart devices, have been reviewed. At last, the current challenges and future perspectives of graphene ERAs are discussed.

Wearable Sunlight-Triggered Bimorph Textile Actuators

Photothermal bimorph actuators have attracted considerable attention in intelligent devices because of their cordless control and lightweight and easy preparation. However, current photothermal bimorph actuators are mostly based on films or papers driven by near-infrared sources, which are deficient in flexibility and adaptability, restricting their potential in wearable applications. Herein, a bimorph textile actuator that can be scalably fabricated with a traditional textile route and autonomously triggered by sunlight is reported. The active layer and passive layer of the bimorph are constructed by polypropylene tape and a MXene-modified polyamide filament. Because of the opposite thermal expansion and MXene-enhanced photothermal efficiency (>260%) of the bimorph, the textile actuator presents effective deformation (1.38 cm^-1) under low sunlight power (100 mW/cm²). This work provides a new pathway for wearable sunlight-triggered actuators and finds attractive applications for smart textiles.

Monolithic processing of a layered flexible robotic actuator film for kinetic electronics

Low-invasive soft robotic techniques can potentially be used for developing next-generation body-machine interfaces. Most soft robots require complicated fabrication processes involving 3D printing and bonding/assembling. In this letter, we describe a monolithic soft microrobot fabrication process for the mass production of soft film robots with a complex structure by simple 2D processing of a robotic actuator film. The 45 µg/mm² lightweight film robot can be driven at a voltage of CMOS compatible 5 V with 0.15 mm^-1 large curvature changes; it can generate a force 5.7 times greater than its self-weight. In a durability test, actuation could be carried out over 8000 times without degradation. To further demonstrate this technique, three types of film robots with multiple degrees of freedom and a moving illuminator robot were fabricated. This technique can easily integrate various electrical circuits developed in the past to robotic systems and can be used for developing advanced wearable sensing devices; it can be called "Kinetic electronics".

Left-Handed or Right-Handed? Determinants of the Chirality of Helically Deformable Soft Actuators

Helical curling and spiral structure are very common in nature, which inspire researchers to create various forms of helical configurations and actuators. The helically deformable actuators perform asymmetric deformations and show different chirality, which means that they can be left handed or right handed. However, the mechanism of helical curling and especially how the key factors influence the chirality of the actuator have not been systematically explained and well understood. In this study, we focus on the typical double-layer soft actuator composed of an active (expansion) layer and a passive (supporting) layer and investigate the effect of key factors (expansion coefficient, Young's modulus, relative thickness) on the chirality of the helical actuation or morphing by comprehensive finite element analyses. It was found that (i) the anisotropic expansion of the active layer or (ii) the anisotropic Young's modulus of the active or the passive layer is indispensable for helical curling. In Case (i), the actuator curls along the direction of greater expansion of the active layer. In Case (ii), the actuator curls along the direction of closer moduli match of the active and passive layers, and their relative thickness also affects the helical morphing of the actuator. In practice, the above two factors may cooperate or compete with each other, and the dominant one determines the chirality. This work gives the general rules for helical morphing forms and can provide guidance for the design and preparation of spiral actuators and soft robots in the future.

Bio-Inspired Soft Grippers Based on Impactive Gripping

Grasping and manipulation are fundamental ways for many creatures to interact with their environments. Different morphologies and grasping methods of "grippers" are highly evolved to adapt to harsh survival conditions. For example, human hands and bird feet are composed of rigid frames and soft joints. Compared with human hands, some plants like Drosera do not have rigid frames, so they can bend at arbitrary points of the body to capture their prey. Furthermore, many muscular hydrostat animals and plant tendrils can implement more complex twisting motions in 3D space. Recently, inspired by the flexible grasping methods present in nature, increasingly more bio-inspired soft grippers have been fabricated with compliant and soft materials. Based on this, the present review focuses on the recent research progress of bio-inspired soft grippers based on impactive gripping. According to their types of movement and a classification model inspired by biological "grippers", soft grippers are classified into three types, namely, non-continuum bending-type grippers, continuum bending-type grippers, and continuum twisting-type grippers. An exhaustive and updated analysis of each type of gripper is provided. Moreover, this review offers an overview of the different stiffness-controllable strategies developed in recent years.

A multi-functional light-driven actuator with an integrated temperature-sensing function based on a carbon nanotube composite

Actuators play an important role in the fields of intelligent robots and wearable electronics. Temperature has a great impact on the performances of many actuators. However, most of the traditional actuators only have an actuating function, failing to monitor and send real-time feedback of the temperature of the actuator. To solve the existing problem and break the single-function limit of traditional actuators, we propose a multi-functional light-driven actuator integrated with a temperature-sensing function, which is based on a carbon nanotube (CNT) and methylcellulose (MC) composite. When the CNT-MC film is assembled with biaxially oriented polypropylene (BOPP) to form a bilayer structure, the CNT-MC/BOPP actuator can be driven by near-infrared (NIR) light. Its morphing is based on thermal expansion differences between two layers and shrinkage of MC induced by water loss. The maximal bending curvature is up to 1.03 cm^-1. Meanwhile, the resistance of the actuator can change by about 10%, which realizes real-time temperature monitoring and feedback. Furthermore, we demonstrate two practical applications. First, the CNT-MC film can work as a temperature sensor, as its resistance changes with the temperature in real time. Second, we design an intelligent gripper, which can monitor the temperature during the entire working process. This multi-functional CNT-based device is expected to have a broad application prospect in artificial muscles, soft robotics and wearable electronics.

Soft Robotics: Research, Challenges, and Prospects

The soft robot is a kind of continuum robot, which is mainly made of soft elastic material or malleable material. It can be continuously deformed in a limited space, and can obtain energy in large bending or high curvature distortion. It has obvious advantages such as high security of human-computer interaction, strong adaptability of unstructured environment, high driving efficiency, low maintenance cost, etc. It has wide application prospects in the fields of industrial production, defense military, medical rehabilitation, exploration, and so on. From the perspective of the bionic mechanism, this paper introduces the soft robots corresponding to insect crawling, snake crawling, fish swimming, elephant trunk, arm, etc. According to different driving modes, the soft robots can be classified into pneumatic-hydraulic driven, intelligent material driven, chemical reaction driven, and so on. The mechanical modeling, control strategy, material, and manufacturing methods of soft robot are summarized, and the application fields of soft robot are introduced. This paper analyzes the main challenges faced by the research on the key technologies of soft robots, summarizes and analyzes them, and puts forward the prospects for the future research of soft robots. The development trend of the future is to develop the soft robot with the characteristics of micro-scale, rigid-flexible coupling, variable stiffness, multi-functional, high integration, and intelligence of driving sensor control.

Light-driven diffraction grating based on a photothermal actuator incorporating femtosecond laser-induced GO/rGO

A light-driven diffraction grating incorporating two grating patterns with different pitches atop a photothermal actuator (PTA) has been proposed. It is based on graphene oxide/reduced graphene oxide (GO/rGO) induced via femtosecond laser direct writing (FsLDW). The rGO, its controllable linewidth, and transmission support the formation of grating patterns; its noticeably small coefficient of thermal expansion (CTE), good flexibility, and thermal conductivity enable the fabrication of a PTA consisting of a polydimethylsiloxane layer with a relatively large CTE. Under different intensities of light stimuli, diffraction patterns can be efficiently tailored according to different gratings, which are selectively addressed by incident light beam hinging on the bending of the PTA. This is the first demonstration of combining gratings and PTA, wherein the GO plays the role of a bridge. The light-driven mechanism enables the contactless operation of the proposed device, which can be efficiently induced via FsLDW. The diffraction angle could be changed between 2° and 6° horizontally, and the deviation of side lobes from the main lobe could be altered vertically in a continuous range. The proposed device may provide powerful support for activating dynamic diffraction devices in photothermally contactless schemes.

Recent Progress of Soft Electrothermal Actuators

Developing soft electrothermal actuators (ETAs) has drawn extensive concern in recent years. This article presents a comprehensive review on recent progress of soft ETAs through five sections: device design on structure and materials, property, fabrication methods, applications, and prospects. It's found that the fabrication process can be divided into standard surface complementary metal oxide semiconductor technology, novel laser scribing, and inkjet printing method. Moreover, current applications involve three aspects: mechanical applications, optical applications, and biomimetic applications. It will develop in the direction of increasing electrothermal efficiency and response speed emphatically. This review encourages achievement of its higher performance and broad applications in the future.

Deterministic Role of Carbon Nanotube-Substrate Coupling for Ultrahigh Actuation in Bilayer Electrothermal Actuators

Here, the actuation response of an architectured electrothermal actuator comprising a single layer of carbon nanotube (CNT) film and a relatively thicker film of silk, cellulose, or polydimethylsiloxane is studied. An electric current is passed through the CNT film, which generates heat responsible for electrothermal actuation, in all samples, affixed as per doubly clamped beam configuration. All samples, including pure CNT film, show remarkable actuation such that actuation monotonically increases with the applied voltage. Cyclic pulsed electrical loading shows a lag in the electric current stimulus and the actuation. Remarkably, an ultrahigh actuation of ∼2.8%, which was 72 times more than that shown by pure CNT film, is measured in the CNT-cellulose film, that is, the architectured actuator with the natural polymer having the functional property of hygroexpansion and the structural hierarchy of the CNT film, however, at a significantly larger length scale. Overall, the synergetic contribution of the individual layers in these bilayered actuators enabled achieving ultrahigh electrothermal actuation compared to the homogeneous, synthetic polymer-based devices. A detailed discussion, which also includes examination of the role of the hierarchical substructure and the functional properties of the substrate and numerical analysis using the finite element method, is presented to highlight the actuation mechanism in the fabricated actuators.

Laser-Induced Graphene for Electrothermally Controlled, Mechanically Guided, 3D Assembly and Human-Soft Actuators Interaction

Mechanically guided, 3D assembly has attracted broad interests, owing to its compatibility with planar fabrication techniques and applicability to a diversity of geometries and length scales. Its further development requires the capability of on-demand reversible shape reconfigurations, desirable for many emerging applications (e.g., responsive metamaterials, soft robotics). Here, the design, fabrication, and modeling of soft electrothermal actuators based on laser-induced graphene (LIG) are reported and their applications in mechanically guided 3D assembly and human-soft actuators interaction are explored. Over 20 complex 3D architectures are fabricated, including reconfigurable structures that can reshape among three distinct geometries. Also, the structures capable of maintaining 3D shapes at room temperature without the need for any actuation are realized by fabricating LIG actuators at an elevated temperature. Finite element analysis can quantitatively capture key aspects that govern electrothermally controlled shape transformations, thereby providing a reliable tool for rapid design optimization. Furthermore, their applications are explored in human-soft actuators interaction, including elastic metamaterials with human gesture-controlled bandgap behaviors and soft robotic fingers which can measure electrocardiogram from humans in an on-demand fashion. Other demonstrations include artificial muscles, which can lift masses that are about 110 times of their weights and biomimetic frog tongues which can prey insects.

Electricity-Triggered Self-Healing of Conductive and Thermostable Vitrimer Enabled by Paving Aligned Carbon Nanotubes

Electrically conducting films are important for the development of modern electronics. However, most of these conducting films become susceptible to structure fractures under complex deformations or accidental damages, causing the devices to fail to work. Inspired by the self-healing capability of creatures, we developed a self-healing, thermostable, and electrically conducting film that can be healed by electricity by paving aligned carbon nanotube (CNT) sheets onto the surface of liquid crystal elastomer composite films. The aligned CNT sheets make the composites conductive, so the composites can be healed not only by light but also by electricity after breaking. The scratches on the self-healing film can be healed easily under a voltage of 1.18 V/mm because of the electro-thermal effect of aligned CNT sheets. The healed film has almost the same mechanical properties compared to the pristine sample. The electrical and mechanical self-healing of the film is derived from the electrical reconnection of carbon nanotubes and transesterification-induced topology change of the network, respectively. We further demonstrated soft actuators and high-performance supercapacitors based on the prepared self-healing conducting films. This method for preparing self-healing conducting films enables the development of self-healing electronics.

Three-Layered Design of Electrothermal Actuators for Minimal Voltage Operation

By designing an actuator composed of thin layers with different coefficients of thermal expansion (CTE) together with an electrically conductive layer, the CTE mismatch can be utilized to produce soft electrothermal actuators (ETAs). These actuators have been typically implemented using only two layers, commonly relying on Timoshenko's analytic model that correlates the temperature to the actuator's curvature. In this study, we extend the analytic model to include the thermoelectric relation present in ETAs, that is, the conductive layer's properties with respect to the operation temperature. By applying the thermoelectric relation, a minimal voltage optimization can be applied to the analytic model. Using dimensionless analysis, we optimize the ETAs performance for both bi- and tri-layer ETAs with and without the thermal modeling. The bi-layer optimization not only predicts the maximal value for the bi-layer performance but also provides the optimal thickness of each layer for any couple of materials. We validate the tri-layer analytic model experimentally by measuring the curvature for different third layer thicknesses. Finally, we optimize the tri-layer design based on the analytic model, which can achieve an improvement in curvature per voltage of >3000% over the optimal bi-layer ETA.

Patterned, morphing composites via maskless photo-click lithography

Morphing materials, also known as smart materials are attracting increasing attention as sensors, actuators and in soft robotic applications. In this work bilayered morphing composites were created by exploiting the thiol-ene photoclick reaction via maskless digital light processing (DLP). This technique allows for gradients and patterns of near infrared (nIR)-triggered materials to be efficiently crosslinked to substrates, with suitable interfacial adhesion to realise complex morphing. Photo-thermally responsive composites are produced by DLP patterning of reduced graphene oxide-filled chitosan-methacrylamide (rGO-chitosan-MA) on thiolated polydimethylsiloxane substrates via thiol-ene photoclick reaction. Morphing composites with parallel striped patterns and box-like hinges were printed via DLP to realise self-rolling and self-folding behaviours. Bilayered structures, with gradient rGO-chitosan-MA thicknesses (2-8 μm), were produced by controlling the light intensity from the DLP device. These gradient bilayered structures enable photothermal-triggered gradient bending and morphing exemplified here by a "walking worm" and a kirigami-inspired "opening flower". Thermo-mechanical calculations were performed to estimate bending angles, and finite element analysis applied to simulate self-folding and bending. The difference between simulation and measurements is in the range 0.4-7.6%, giving confidence to the assumptions and simplifications applied in design.

Versatile high-performance inkjet-printed paper photo-actuators based on 2D materials

In this paper, we present high-performance and versatile inkjet-printed paper photo-actuators based on two-dimensional (2D) nanomaterials. As a rapid fabrication method, inkjet printing of 2D materials is used to promptly fabricate photo-actuators in a bi-layer paper/polymer structure. Water-based and biocompatible inks based on graphene and molybdenum disulfide are developed based on liquid phase exfoliation and differential centrifugation technique. It is shown that incorporation of 2D materials with inkjet printing techniques and liquid phase exfoliation can lead to rapid fabrication of photo-actuators with huge opto-mechanical energy release and versatility with a broad range of applications due to specific design and methods presented in this paper.

An Artificial Somatic Reflex Arc

The emulation of human sensation, perception, and action processes has become a major challenge for bioinspired intelligent robotics, interactive human-machine interfacing, and advanced prosthetics. Reflex actions, enabled through reflex arcs, are important for human and higher animals to respond to stimuli from environment without the brain processing and survive the risks of nature. An artificial reflex arc system that emulates the functions of the reflex arc simplifies the complex circuit design needed for "central-control-only" processes and becomes a basic electronic component in an intelligent soft robotics system. An artificial somatic reflex arc that enables the actuation of electrochemical actuators in response to the stimulation of tactile pressures is reported. Only if the detected pressure by the pressure sensor is above the stimulus threshold, the metal-organic-framework-based threshold controlling unit (TCU) can be activated and triggers the electrochemical actuators to complete the motion. Such responding mechanism mimics the all-or-none law in the human nervous system. As a proof of concept, the artificial somatic reflex arc is successfully integrated into a robot to mimic the infant grasp reflex. This work provides a unique and simplifying strategy for developing intelligent soft robotics, next-generation human-machine interfaces, and neuroprosthetics.

Fast-response, agile and functional soft actuators based on highly-oriented carbon nanotube thin films

Highly-oriented carbon nanotube (CNT) film, which is made from super-aligned CNT array, is an even, tough and soft material. This CNT film has strong anisotropy in electrical and mechanical properties. The electrical conductivity and Young's modulus of the CNT film (2.8 × 10⁴S m^-1, 3000 MPa) along the CNT aligned direction are one magnitude larger than those (2.3 × 10³S m^-1, 200 MPa) along the vertical direction. In virtue of easy preparation and good processability, it is competent as high-performance flexible electrodes for soft actuators, advanced film capacitors and batteries. Here, we use this highly-oriented CNT film as a heating electrode to make fast-response soft actuators. The actuator has a thin bilayer composite structure and is driven by current heating. It takes a typical miniaturized actuator only 0.9 s to perform fast and large-angle deformations (270° bending, curvature 4.8 cm^-1), and its bending speed can reach 300° s^-1by low power driving (2.4 W). Based on this CNT film, graphical designs and fine processing were carried out to make patterned electrodes and functional actuators, such as cross-shaped and hand-shaped ones. Notably, a well-designed gripper-like actuator can even deftly grab and manipulate some tiny things, e.g. a grain of rice. Moreover, the anisotropic properties of the CNT film also effectively influence and regulate the deformation forms of the actuators. In virtue of good and unique performances in electrical, mechanical and thermal aspects, the high-oriented CNT film would have promising application prospects in various emerging soft devices.

Reversely Orthogonal Actuation of a Janus-Faced Film Based on Asymmetric Polymer Brush Modification

The actuation phenomena of materials upon external stimulus have attracted much attention for the development of excellent sensors and devices. Herein, we present a smart Janus-faced film that exhibits novel behavior of reverse orthogonal actuation under high humidity and a positive actuation under low humidity, which is achieved by asymmetric polymer brushes on polydimethysiloxane as a substrate through surface-initiated atom transfer radical polymerization. The classical theory of plates and shells and finite element simulations are also applied to understand the orthogonal actuation mechanism of the actuator. This Janus-faced film can reversely grab objects rapidly under high humidity, which provides significant potential to design a more intelligent actuator. In addition, this film is highly sensitive to humidity that even the approaching finger can make it to bend, which is just like the actuation behavior of Mimosa pudica. Based on the above phenomena, we also design the sensing devices to realize the detection of humidity. Interestingly, the film intelligently identifies different solvents (e.g., water and ethanol). This work may demonstrate significant potential in smart surface modifications, flexible robots, bionic sensors, and other fields.

Multi-stimuli-responsive programmable biomimetic actuator

Untethered small actuators have various applications in multiple fields. However, existing small-scale actuators are very limited in their intractability with their surroundings, respond to only a single type of stimulus and are unable to achieve programmable structural changes under different stimuli. Here, we present a multiresponsive patternable actuator that can respond to humidity, temperature and light, via programmable structural changes. This capability is uniquely achieved by a fast and facile method that was used to fabricate a smart actuator with precise patterning on a graphene oxide film by hydrogel microstamping. The programmable actuator can mimic the claw of a hawk to grab a block, crawl like an inchworm, and twine around and grab the rachis of a flower based on their geometry. Similar to the large- and small-scale robots that are used to study locomotion mechanics, these small-scale actuators can be employed to study movement and biological and living organisms.

Untethered small actuators have various applications but existing small-scale actuators are limited in their response to different stimuli. Here, we present a multiresponsive patternable actuator that can respond to humidity, temperature and light, via programmable structural changes.

Biomimetic Locomotion of Electrically Powered "Janus" Soft Robots Using a Liquid Crystal Polymer

Oriented liquid crystal networks (LCNs) can undergo reversible shape change at the macroscopic scale upon an order-disorder phase transition of the mesogens. This property is explored for developing soft robots that can move under external stimuli, such as light in most studies. Herein, electrically driven soft robots capable of executing various types of biomimetic locomotion are reported. The soft robots are composed of a uniaxially oriented LCN strip, a laminated Kapton layer, and thin resistive wires embedded in between. Taking advantage of the combined attributes of the actuator, namely, easy processing, reprogrammability, and reversible shape shift between two 3D shapes at electric power on and off state, the concept of a "Janus" soft robot is demonstrated, which is built from a single piece of the material and has two parts undergoing opposite deformations simultaneously under a uniform stimulation. In addition to complex shape morphing such as the movement of oarfish and sophisticated devices like self-locking grippers, electrically powered "Janus" soft robots can accomplish versatile locomotion modes, including crawling on flat surfaces through body arching up and straightening down, crawling inside tubes through body stretching and contraction, walking like four-leg animals, and human-like two-leg walking while pushing a load forward.

Shape programming of polymeric based electrothermal actuator (ETA) via artificially induced stress relaxation

Electrothermal actuators (ETAs) are a new generation of active materials that can produce different motions from thermal expansion induced by Joule heating. It is well-known that the degree of deformation is determined by the amount of Joule heating and the coefficient of thermal expansion (CTE) of the material. Previous works on polymeric ETAs are strongly focused on increasing electrical conductivity by utilizing super-aligned carbon nanotube (CNT) sheets. This allows greater deformation for the same drive voltage. Despite these accomplishments with low-voltage actuation, many of the ETAs were constructed to have basic geometries such as a simple cantilever shape. In this paper, it was discovered that shape of polymeric ETA can be programmed into a desired configuration by applying an induced stress relaxation mechanism and post secondary curing. By utilizing such effects, an ETA can be programmed into a curled resting state which allows the actuator to achieve an active bending angle over 540°, a value far greater than any previous studies. This shape programming feature also allows for tailoring the actuator configuration to a specific application. This is demonstrated here by fabricating a small crawling soft robot similar to mimic an inchworm motion.

Leaf-inspired multiresponsive MXene-based actuator for programmable smart devices

Natural leaves, with elaborate architectures and functional components, harvest and convert solar energy into chemical fuels that can be converted into energy based on photosynthesis. The energy produced leads to work done that inspired many autonomous systems such as light-triggered motion. On the basis of this nature-inspired phenomenon, we report an unprecedented bilayer-structured actuator based on MXene (Ti3C2T x )-cellulose composites (MXCC) and polycarbonate membrane, which mimic not only the sophisticated leaf structure but also the energy-harvesting and conversion capabilities. The bilayer actuator features multiresponsiveness, low-power actuation, fast actuation speed, large-shape deformation, programmable adaptability, robust stability, and low-cost facile fabrication, which are highly desirable for modern soft actuator systems. We believe that these adaptive soft systems are attractive in a wide range of revolutionary technologies such as soft robots, smart switch, information encryption, infrared dynamic display, camouflage, and temperature regulation, as well as human-machine interface such as haptics.

Biomimetic Thermal-sensitive Multi-transform Actuator

Controllable and miniaturised mechanical actuation is one of the main challenges facing various emerging technologies, such as soft robotics, drug delivery systems, and microfluidics. Here we introduce a simple method for constructing actuating devices with programmable complex motions. Thermally responsive hydrogels based on poly(N-isopropylacrylamide) (PNIPAM) and its functionalized derivatives (f-PNIPAM) were used to control the lower critical solution temperature (LCST) or the temperature at which the gel volume changes. Techniques for ultra-violet crosslinking the monomer solutions were developed to generate gel sheets with controllable crosslink density gradients that allowed bending actuation to specified curvatures by heating through the LCST. Simple molding processes were then used to construct multi-transform devices with complex shape changes, including a bioinspired artificial flower that shows blossoming and reverse blossoming with a change in temperature.

Laser fabrication of graphene-based electrothermal actuators enabling predicable deformation

Electrothermal actuators (ETAs) that can convert electric energy into mechanical works have been extensively studied for their great potential in artificial muscles and robotics. However, the production of ETAs that enable complex and predictable deformation is still challenging. In this Letter, an ETA based on reduced graphene oxide (RGO) and polyethylene (PE) bimorph is developed through a facile laser-scribing method. Since the laser-scribing technology permits flexible patterning, conductive RGO electrodes with complex circuit patterns can be readily produced on a thermally active PE film, forming an ETA capable of fast and reversible deformation. In addition, the laser-scribed ETA demonstrated orientation-defined bending performance, enabling more sophisticated deformation control. The laser scribing of graphene oxide has opened up a new way to produce ETAs towards cutting-edge applications such as soft robotics and intelligent systems.

Ultrafast yet Controllable Dual-Responsive All-Carbon Actuators for Implementing Unusual Mechanical Movements

Synthetic soft actuators with the integration of fast response speed, large-scale displacement, and precise control over deformation direction are highly demanded for implementing agile and precise mechanical movements in smart robots, artificial muscles, and biomimetic devices. In this work, ultrafast yet controllable all-carbon actuators are created based on graphene oxide and oriented carbon nanotubes. This all-carbon actuator shows humidity- and near infrared light-induced actuation with unprecedented performance integration, including ultrafast response (0.08 s), ultralarge deformation (angle change per length 70 °/mm), on-demand control over deformation direction (directional bending and chiral twisting), and high reversibility (no detectable fatigue after 10 000 cycles). Impressively, the remarkable actuation performances allow the all-carbon actuator to implement diverse unusual movements, including light-triggered jumping vertically at a speed of 250 mm/s, rolling horizontally at a speed of 12 mm/s, throwing an object at a speed of 505 mm/s, arresting a high-speed object (335 mm/s), as well as humidity-triggered lifting of an object instantly (0.34 s).

Heterogeneous Strain Distribution of Elastomer Substrates To Enhance the Sensitivity of Stretchable Strain Sensors

Stretchable strain sensors, which convert mechanical stimuli into electrical signals, largely fuel the growth of wearable bioelectronics due to the ubiquitous, health-related strain in biological systems. In contrast to rigid conventional strain sensors, stretchable strain sensors present advantages of conformality and stretchability, solving the mechanical mismatch between electronics and the human body. However, the great challenge of stretchable strain sensors lies in achieving high sensitivity, which is required for both signal fidelity and cost considerations. Recent advances to solve this sensitivity challenge have focused on material optimization, in search of the optimum combination of conductive active materials and elastomer substrates among a myriad of artificial or natural materials. However, high sensitivity with a gauge factor larger than 50 remains a grand challenge, especially within large-strain regions. Here we present heterogeneous strain distribution of elastomer substrates as a powerful strategy to significantly enhance the sensitivity of stretchable strain sensors. The theoretical foundation of this strategy is mathematically proven on the basis of Ohm's law in electrics and mechanics of materials. First, the extent of the sensitivity enhancement is proved to be determined by the local strain in resistance-testing segments of heterogeneous strain sensors. Next, the local strain is proved to be quantitatively decided by material properties such as section area and Young's modulus. Thus, the necessary and sufficient condition to achieve high sensitivity in heterogeneous strain sensors is that the Young's modulus reciprocal or section area reciprocal in the resistance-testing segment is larger than the mean value. This provides a theoretical design guideline to achieve high sensitivity via heterogeneous strain distribution. On the basis of this guideline, we systematically summarize concrete instances of heterogeneity-induced sensitivity improvement in stretchable strain sensors, in sequence of increasing dimensionality. A typical example of a one-dimensional heterogeneous strain sensor is a structured fiber with microbeads, where the varied section area along the fiber axis results in heterogeneous strain and sensitivity improvement. Two-dimensional heterogeneous sensors in the form of thin films contain thickness gradient sensors and auxetic mechanical metamaterial sensors. The former exhibit heterogeneous section area via the self-pinning method, while the latter show heterogeneity in both the strain direction and amplitude, leading to a 24-fold improvement in sensitivity. Three-dimensional strain sensors include rationally structured sensors for out-of-plane force detection and asymmetric active materials in electronic whiskers. The resultant enhanced sensitivity in these heterogeneous strain sensors is beneficial for applications such as continuous health monitoring, biomedical diagnostics, and replacement prosthetics, taking advantage of augmented detection accuracy and declined device cost. Finally, we discuss possible future work in exploiting heterogeneous strain distributions, involving extended methodology to achieve heterogeneity, employing suppressed strain for stretchable electrodes, cyclic durability for long-term applications, and multifunctional system-level integration. We believe that this strategy of using heterogeneous strain distribution to enhance sensitivity can strongly promote the development of stretchable strain sensors for both practical and theoretical requirements.

Self-Sensing Paper Actuators Based on Graphite-Carbon Nanotube Hybrid Films

Soft actuators have demonstrated potential in a range of applications, including soft robotics, artificial muscles, and biomimetic devices. However, the majority of current soft actuators suffer from the lack of real-time sensory feedback, prohibiting their effective sensing and multitask function. Here, a promising strategy is reported to design bilayer electrothermal actuators capable of simultaneous actuation and sensation (i.e., self-sensing actuators), merely through two input electric terminals. Decoupled electrothermal stimulation and strain sensation is achieved by the optimal combination of graphite microparticles and carbon nanotubes (CNTs) in the form of hybrid films. By finely tuning the charge transport properties of hybrid films, the signal-to-noise ratio (SNR) of self-sensing actuators is remarkably enhanced to over 66. As a result, self-sensing actuators can actively track their displacement and distinguish the touch of soft and hard objects.

Low-voltage-driven soft actuators

Soft actuators based on electroactive polymers (EAPs) are the core constituents of future soft robots owing to their fascinating properties such as lightweight, compactness, easy fabrication into various forms, and low cost. Ionic EAP actuators are particularly attractive owing to the low driving voltages (<3 V) as compared to those of electronic EAP actuators (usually kilovolts). This paper presents a brief overview of the recent progress in a range of EAP actuators by focusing on low voltage operation, in addition to the challenges and future strategies for their wide applicability in artificial muscles and various innovative soft robot technologies.

Humidity- and light-driven actuators based on carbon nanotube-coated paper and polymer composite

Multi-responsive actuators driven by different stimuli (e.g. light, humidity, electricity) have attracted intense attention recently for the advantages of being used in various environments and show enormous actuation. In this work, we propose humidity- and light-driven actuators based on carbon nanotube (CNT)-coated paper and a biaxially oriented polypropylene (BOPP) composite. The CNT-paper/BOPP actuator shows large bending actuation when driven by humidity change (curvature of 1.2 cm-1) and near infrared (NIR) light irradiation (curvature up to 1.6 cm-1). The great actuation performances outperform most other paper-based actuators. Finally, a smart gripper, of which the initial opening width can be enlarged, is fabricated on the basis of the CNT-paper/BOPP actuators. By utilizing the bidirectional bending motion of the actuator, the opening width of the gripper can increase to a width that is 4 times larger than its initial width, so as to grasp a large object. The gripper is also able to raise and move an object that is 20 times heavier than one actuator of the gripper. We assume that this new type of actuator has great potential in artificial muscle, soft robotics and biomimetic applications.

Dual-Mechanism and Multimotion Soft Actuators Based on Commercial Plastic Film

Soft actuators have attracted a lot of attention owing to their biomimetic performance. However, the development of soft actuators that are easily prepared from readily available raw materials, conveniently utilized, and cost-efficient is still a challenge. Here, we present a simple method to fabricate a polyethylene-based soft actuator. It has controllable anisotropic structure and can realize multiple motions, including bidirectional bending and twisting based on dual mechanisms, which is a rare phenomenon. Especially, the soft actuators can response at a very small temperature difference (Δ T ≥ 2.3 °C); therefore, even skin touch can quickly drive the actuator, which greatly broadens its applications in daily life. The soft actuator could demonstrate a curvature up to 7.8 cm^-1 accompanied by powerful actuation. We have shown that it can lift an object 27 times its own weight. We also demonstrate the application of this actuator as intelligent mechanical devices.

Programmable and functional electrothermal bimorph actuators based on large-area anisotropic carbon nanotube paper

Electro-active polymer (EAP) actuators, such as electronic, ionic and electrothermal (ET) actuators, have become an important branch of next-generation soft actuators in bionic robotics. However, most reported EAP actuators could realize only simple movements, being restricted by the small area of flexible electrodes and simple designs. We prepared large-area flexible electrodes of high anisotropy, made of oriented carbon nanotube (CNT) paper, and carried out artful graphic designs and processing on the electrodes to make functional ET bimorph actuators which can realize large bending deformations (over 220°, curvature > 1.5 cm^-1) and bionic movements driven by electricity. The anisotropy of CNT paper benefits electrode designs and multiform actuations for complex actuators. Based on the large-area CNT paper, more interesting and functional actuators can be designed and prepared which will have practical applications in the fields of artificial muscles, complicated actuations, and soft and bionic robotics.

Multiresponsive actuators based on modified electrospun films

Robot technology has made great progress over the past few decades, and has found wide use in military, industrial and service fields. In recent years, there has been a dramatic increase in the demand for soft robots. However, as a key part, the development of soft actuators capable of low-energy actuation, multi-stimulation response, and large shape deformation is still challenging. In this work, we fabricated multiresponsive actuators based on modified electrospun films. The actuators provided the largest curvatures of 0.83 cm-1, 0.6 cm-1, and 1.05 cm-1, stimulated by humidity, light, and electricity, respectively. Furthermore, we designed a biomimetic application-a crawling robot-which demonstrates excellent potential applications of the actuator in soft robotics, artificial muscles, and the biomimetics field.

Artificial Muscles: Mechanisms, Applications, and Challenges

The area of artificial muscle is a highly interdisciplinary field of research that has evolved rapidly in the last 30 years. Recent advances in nanomaterial fabrication and characterization, specifically carbon nanotubes and nanowires, have had major contributions in the development of artificial muscles. However, what can artificial muscles really do for humans? This question is considered here by first examining nature's solutions to this design problem and then discussing the structure, actuation mechanism, applications, and limitations of recently developed artificial muscles, including highly oriented semicrystalline polymer fibers; nanocomposite actuators; twisted nanofiber yarns; thermally activated shape-memory alloys; ionic-polymer/metal composites; dielectric-elastomer actuators; conducting polymers; stimuli-responsive gels; piezoelectric, electrostrictive, magnetostrictive, and photostrictive actuators; photoexcited actuators; electrostatic actuators; and pneumatic actuators.

Biophysical and biological contributions of polyamine-coated carbon nanotubes and bidimensional buckypapers in the delivery of miRNAs to human cells

Recent findings in nanomedicine have revealed that carbon nanotubes (CNTs) can be used as potential drug carriers, therapeutic agents and diagnostics tools. Moreover, due to their ability to cross cellular membranes, their nanosize dimension, high surface area and relatively good biocompatibility, CNTs have also been employed as a novel gene delivery vector system. In our previous work, we functionalized CNTs with two polyamine polymers, polyethyleneimine (PEI) and polyamidoamine dendrimer (PAMAM). These compounds have low cytotoxicity, ability to conjugate microRNAs (such as miR-503) and, at the same time, transfect efficiently endothelial cells. The parameters contributing to the good efficiency of transfection that we observed were not investigated in detail. In fact, the diameter and length of CNTs are important parameters to be taken into account when evaluating the effects on drug delivery efficiency. In order to investigate the biophysical and biological contributions of polymer-coated CNTs in delivery of miRNAs to human cells, we decided to investigate three different preparations, characterized by different dimensions and aspect ratios. In particular, we took into account very small CNTs, a suspension of CNTs starting from the commercial product and a 2D material based on CNTs (ie, buckypapers [BPs]) to examine the transfection efficiency of a rigid scaffold. In conclusion, we extensively investigated the biophysical and biological contributions of polyamine-coated CNTs and bidimensional BPs in the delivery of miRNAs to human cells, in order to optimize the transfection efficiency of these compounds to be employed as efficient drug delivery vectors in biomedical applications.

A powerful dual-responsive soft actuator and photo-to-electric generator based on graphene micro-gasbags for bioinspired applications

High-performance dual-responsive soft actuators with internal graphene micro-gasbags are fabricated and used to realize diverse biomimetic motions.

Biophysical and biological contributions of polyamine-coated carbon nanotubes and bidimensional buckypapers in the delivery of miRNAs to human cells

Recent findings in nanomedicine have revealed that carbon nanotubes (CNTs) can be used as potential drug carriers, therapeutic agents and diagnostics tools. Moreover, due to their ability to cross cellular membranes, their nanosize dimension, high surface area and relatively good biocompatibility, CNTs have also been employed as a novel gene delivery vector system. In our previous work, we functionalized CNTs with two polyamine polymers, polyethyleneimine (PEI) and polyamidoamine dendrimer (PAMAM). These compounds have low cytotoxicity, ability to conjugate microRNAs (such as miR-503) and, at the same time, transfect efficiently endothelial cells. The parameters contributing to the good efficiency of transfection that we observed were not investigated in detail. In fact, the diameter and length of CNTs are important parameters to be taken into account when evaluating the effects on drug delivery efficiency. In order to investigate the biophysical and biological contributions of polymer-coated CNTs in delivery of miRNAs to human cells, we decided to investigate three different preparations, characterized by different dimensions and aspect ratios. In particular, we took into account very small CNTs, a suspension of CNTs starting from the commercial product and a 2D material based on CNTs (ie, buckypapers [BPs]) to examine the transfection efficiency of a rigid scaffold. In conclusion, we extensively investigated the biophysical and biological contributions of polyamine-coated CNTs and bidimensional BPs in the delivery of miRNAs to human cells, in order to optimize the transfection efficiency of these compounds to be employed as efficient drug delivery vectors in biomedical applications.