Stereoselectivity of methyl aryldiazoacetate cyclopropanations of 1,1-diarylethylene. Asymmetric synthesis of a cyclopropyl analogue of tamoxifen

Facile Recovery and Recycling of a Soluble Dirhodium Catalyst in Asymmetric Cyclopropanation via a Catalyst-in-Bag System

A catalyst-in-bag system facilitates the recovery and recycling of chiral dirhodium carboxylate catalysts used for enantioselective, intermolecular cyclopropanation. The catalyst-in-bag system incorporates a soluble enantioselective dirhodium complex catalyst within a reusable, commercial dialysis membrane. Dirhodium catalysts of different sizes are examined, and two catalysts with molecular weights above 2400 Da are well-retained by the membrane. The catalyst Rh2(S-TPPTTL)4 [TPPTTL = (1,3-dioxo-4,5,6,7-tetraphenylisoindolin-2-yl)-3,3-dimethylbutanoate] is explored in enantioselective cyclopropanation reactions under a variety of conditions. The Rh2(S-TPPTTL)4 catalyst, when contained in the catalyst-in-bag system, provides high yields and enantioselectivities, akin to the homogeneous catalyst in solution, with negligible rhodium permeation out of the bag over five catalytic cycles. The catalyst-in-bag approach facilitates recovery of the expensive rhodium metal and ligand, with only ppm level Rh detected in the reaction products. The flexible and expandable catalyst-in-bag system can be accommodated in vessels of different shapes and dimensions.

Deconstructive Synthesis of Bridged and Fused Rings via Transition-Metal-Catalyzed "Cut-and-Sew" Reactions of Benzocyclobutenones and Cyclobutanones

Bridged and fused rings are commonly found in biologically important molecules. Current tactics to construct these ring systems are primarily based on stepwise ring formation (i.e., making one ring first followed by making another) and cycloaddition reactions (e.g., Diels-Alder reaction). To seek a complementary and perhaps more unified ring-forming approach, a deconstructive strategy based on C-C bond activation of cyclic ketones has been conceived. The named "cut-and-sew" reaction uses cyclic ketones with a tethered unsaturated moiety as substrates, which involves oxidative addition of a transition metal into the ketone C-C bond followed by intramolecular insertion of the unsaturated unit. This strategy has proved successful to access diverse ring scaffolds that are nontrivial to construct otherwise.This Account offers a concise summary of our laboratory's systematic efforts in developing transition metal-catalyzed cut-and-sew reactions for the synthesis of bridged and fused rings over the past 10 years. In particular, we will focus on the reactions using readily available benzocyclobutenones and cyclobutanones. To date, the scope of the cut-and-sew reactions has been greatly expanded. First, diverse unsaturated moieties can serve as suitable coupling partners, such as alkenyl, alkynyl, allenyl, carbonyl, and iminyl groups. Second, a variety of reaction modes have been uncovered. In this account, (4 + 2), (4 + 2 - 1), and (4 + 1) cycloadditions that lead to a range of bridged or fused scaffolds will be summarized. Third, enantioselective transformations have been realized to efficiently construct chiral scaffolds, which are enabled by two strategies: enantio-determining migratory insertion and desymmetrization of cyclobutanones. Fourth, the synthetic applications have been demonstrated in streamlined total syntheses of a number of complex natural products. Compared to conventional synthetic logics, the cut-and-sew reaction allows the development of new bond-disconnecting strategies. Thus, the syntheses of (-)-cycloclavine, (-)-thebainone A, penicibilaenes, and the proposed cycloinumakiol are discussed in more detail.In addition to the narrative of the development of the cut-and-sew chemistry, this Account also aims to provide core guiding foundations and inspirations toward broader deconstructive synthetic applications through C-C bond cleavage. It is anticipated that more classes of cyclic compounds could serve as the substrates beyond benzocyclobutenones and cyclobutanones, and more diverse unsaturated moieties could be coupled. It can also be envisaged that more innovative utilization of this cut-and-sew strategy in complex organic syntheses will be revealed in the near future.

Finding Opportunities from Surprises and Failures. Development of Rhodium-Stabilized Donor/Acceptor Carbenes and Their Application to Catalyst-Controlled C-H Functionalization

Catalyst-controlled C-H functionalization by means of the C-H insertion chemistry of rhodium carbenes has become a powerful synthetic method. The key requirements for the development of this chemistry are donor/acceptor carbenes and the chiral dirhodium tetracarboxylate catalysts. This perspective will describe the stages involved in developing this chemistry and illustrate the scope of the donor/acceptor carbene C-H functionalization.

Concise Synthesis of (-)-Cycloclavine and (-)-5- epi-Cycloclavine via Asymmetric C-C Activation

To illustrate the synthetic significance of C-C activation methods, here we describe an efficient strategy for the enantioselective total syntheses of (-)-cycloclavine and (-)-5- epi-cycloclavine, which is enabled by an asymmetric Rh-catalyzed "cut-and-sew" transformation between benzocyclobutenones and olefins. Despite the compact structure of cycloclavine with five-fused rings, the total synthesis was accomplished in 10 steps with a 30% overall yield. Key features of the synthesis include (1) a Pd-catalyzed tandem C-N bond coupling/allylic alkylation sequence to construct the nitrogen-tethered benzocyclobutenone, (2) a highly enantioselective Rh-catalyzed carboacylation of alkenes to forge the indoline-fused tricyclic structure, and (3) a diastereoselective cyclopropanation for preparing the tetrasubstituted cyclopropane ring. Notably, an improved catalytic condition has been developed for the nitrogen-tethered cut-and-sew transformation, which uses a low catalyst loading and allows for a broad substrate scope with high enantioselectivity (94-99% e.e.). The C-C activation-based strategy employed here is anticipated to have further implications for syntheses of other natural products that contain complex fused or bridged rings.

Synthesis and biological evaluation of novel cyclopropyl derivatives as subtype-selective ligands for estrogen receptor

Objectives

Tamoxifen is the most commonly used selective estrogen receptor modulators (SERMs); however, patients often develop the acquired drug resistance on tamoxifen therapy. The aim of this study was to develop new SERMs.

Methods

Several novel cyclopropyl derivatives were designed and synthesized. The binding affinities of these compounds as well as the selectivity on subtype of estrogen receptor (ER) were assessed by fluorescence polarization. The antagonistic activity was also evaluated by dual-luciferase reporter assay.

Key findings

Our data identified five compounds (9a, 9b, 9d, 9e and 9f) with a higher selectivity on ERα than ERβ subtype, warranting further development as a subtype-selective ER modulator. The study of antiestrogen activity also demonstrated that compounds 9a, 9c-f acted as full functional antagonists for ERα. These compounds had no or very low cytotoxicity.

Conclusions

Although these cyclopropyl derivatives showed lower binding affinities on ERs compared to 17β-estradiol, five of these compounds exhibited binding to ERα only and therefore might serve as a promising lead compound for further development of novel subtype-selective SERMs.

Effect of remote aryl substituents on the conformational equilibria of 2,2-diaryl-1,3-dioxanes: importance of electrostatic interactions

The conformational preference of a variety of 2,2-diaryl-1,3-dioxanes bearing remote substituents on the phenyl rings has been studied via equilibration of configurationally isomeric 2,2-diaryl-cis-4,6-dimethyl-1,3-dioxane epimers, X-ray crystallography, (1)H NOESY analysis, and B3LYP/6-311+G* calculations. When the aryl ring bears a remote electron-withdrawing substituent, the isomer having both the higher dipole moment and the electron-withdrawing group in the equatorial phenyl ring and/or an electron-donating group in the axial ring has the lower energy. These results differ from the conclusions reported in a previous study of similar systems. The conformational energy differences of para-substituted 2,2-diaryl-1,3-dioxanes are linearly related to the Hammett σ values with a slope (ρ) of 0.6. In addition, there is a trend toward longer bond lengths between the C(2) ketal center and the aryl ring as the electron-withdrawing nature of the para-substituent is increased. Electrostatic interactions, rather than a hyperconjugative anomeric effect, appear to be responsible for the conformational behavior of such molecules.

Design and synthesis of norendoxifen analogues with dual aromatase inhibitory and estrogen receptor modulatory activities

Both selective estrogen receptor modulators and aromatase inhibitors are widely used for the treatment of breast cancer. Compounds with both aromatase inhibitory and estrogen receptor modulatory activities could have special advantages for treatment of breast cancer. Our previous efforts led to the discovery of norendoxifen as the first compound with dual aromatase inhibitory and estrogen receptor binding activities. To optimize its efficacy and aromatase selectivity versus other cytochrome P450 enzymes, a series of structurally related norendoxifen analogues were designed and synthesized. The most potent compound, 4'-hydroxynorendoxifen (10), displayed elevated inhibitory potency against aromatase and enhanced affinity for estrogen receptors when compared to norendoxifen. The selectivity of 10 for aromatase versus other cytochrome P450 enzymes was also superior to norendoxifen. 4'-Hydroxynorendoxifen is therefore an interesting lead for further development to obtain new anticancer agents of potential value for the treatment of breast cancer.

Guide to Enantioselective Dirhodium(II)-Catalyzed Cyclopropanation with Aryldiazoacetates

Catalytic enantioselective methods for the generation of cyclopropanes has been of longstanding pharmaceutical interest. Chiral dirhodium(II) catalysts prove to be an effective means for the generation of diverse cyclopropane libraries. Rh₂(R-DOSP)₄ is generaally the most effective catalyst for asymmetric intermolecular cyclopropanation of methyl aryldiazoacetates with styrene. Rh₂(S-PTAD)₄ provides high levels of enantioinduction with ortho-substituted aryldiazoacetates. The less-established Rh₂(R-BNP)₄ plays a complementary role to Rh₂(R-DOSP)₄ and Rh₂(S-PTAD)₄ in catalyzing highly enantioselective cyclopropanation of 3- methoxy-substituted aryldiazoacetates. Substitution on the styrene has only moderate influence on the asymmetric induction of the cyclopropanation.

Rhodium-catalyzed enantioselective cyclopropanation of olefins with N-sulfonyl 1,2,3-triazoles

N-Sulfonyl 1,2,3-triazoles readily form rhodium(II) azavinyl carbenes, which react with olefins to produce cyclopropanes with excellent diastereo- and enantioselectivity and in high yield.

Enantioselective reactions of donor/acceptor carbenoids derived from alpha-aryl-alpha-diazoketones

The reaction of a variety of alpha-aryl-alpha-diazo ketones with activated olefins, catalyzed by the adamantyl glycine-derived dirhodium complex Rh(2)(S-PTAD)(4), generates cyclopropyl ketones with high diastereoselectivity (up to >95:5 dr) and enantioselectivity (up to 98% ee). Intermolecular C-H functionalization of 1,4-cyclohexadiene by means of carbenoid-induced C-H insertion was also possible with this type of carbenoid.

Balance between allylic C-H activation and cyclopropanation in the reactions of donor/acceptor-substituted rhodium carbenoids with trans-alkenes

Rhodium(II)-catalyzed reactions of aryldiazoacetates with (E)-aryl-substituted alkenes generate C-H insertion products and/or cyclopropanes. The product distribution is influenced by the nature of the donor group on the carbenoid, the structure of the (E)-aryl-substituted alkenes, and the rhodium catalyst.

Sidearm effects in the enantioselective cyclopropanation of alkenes with aryldiazoacetates catalyzed by trisoxazoline/Cu(i)

A highly enantioselective cyclopropanation of alkenes with phenyldiazoacetates catalyzed by CuPF6(CH3CN)4/trisoxazoline has been developed.

Diversity Synthesis Using the Complimentary Reactivity of Rhodium(II)- and Palladium(II)-Catalyzed Reactions

Rhodium(II)-catalyzed reactions of aryldiazoacetates can be conducted in the presence of iodide, triflate, organoboron, and organostannane functionality, resulting in the formation of a variety of cyclopropanes or C-H insertion products with high stereoselectivity. The combination of the rhodium(II)-catalyzed reaction with a subsequent palladium(II)-catalyzed Suzuki coupling offers a novel strategy for diversity synthesis.

Dirhodium tetraprolinate-catalyzed asymmetric cyclopropanations with high turnover numbers

The bridged dirhodium tetraprolinate Rh(2)(S-biTISP)(2) (2) catalyzes the asymmetric cyclopropanation reaction between methyl phenyldiazoacetate and styrene at room temperature with high turnover number (92 000) and turnover frequency (4000 per h). [reaction: see text]

Catalytic asymmetric cyclopropanation of heteroaryldiazoacetates

Rh(2)(S-DOSP)(4)-catalyzed decomposition of heteroaryldiazoacetates in the presence of styrene results in highly diastereoselective and enantioselective cyclopropanations. Heteroaryldiazoacetates containing both electron-rich and electron-deficient heterocycles, such as thiophene, furan, pyridine, indole, oxazole, isoxazole, and benzoxazole, are effective in this chemistry. These studies broaden the range of diazo compounds containing both electron-withdrawing and electron-donating groups, which undergo highly diastereoselective cyclopropanations.

Asymmetric catalytic C-H activation applied to the synthesis of syn-aldol products

Rh(2)(R-DOSP)(4)-catalyzed decomposition of methyl phenyldiazoacetate in the presence of tetraalkoxysilanes results in the asymmetric synthesis of syn-aldol products. This catalytic asymmetric intermolecular C-H activation proceeds by means of a rhodium-carbene-induced C-H insertion.