Bisfunctionalized Janus Molecules

A Janus carbaporphyrin pseudo-dimer

Carbaporphyrin dimers, investigated for their distinctive electronic structures and exceptional properties, have predominantly consisted of systems containing identical subunits. This study addresses the associated knowledge gap by focusing on asymmetric carbaporphyrin dimers with Janus-like characteristics. The synthesis of a Janus-type carbaporphyrin pseudo-dimer 5 is presented. It displays antiaromatic characteristics on the fused side and nonaromatic behavior on the unfused side. A newly synthesized tetraphenylene (TPE) linked bis-dibenzihomoporphyrin 8 and a previously reported dibenzo[g,p]chrysene (DBC) linked bis-dicarbacorrole 9 were prepared as controls. Comprehensive analyses, including 1H NMR spectral studies, single crystal X-ray diffraction analyses, and DFT calculations, validate the mixed character of 5. A further feature of the Janus pseudo-dimer 5 is that it may be transformed into a heterometallic complex, with one side coordinating a Cu(III) center and the other stabilizing a BODIPY complex. This disparate regiochemical reactivity underscores the potential of carbaporphyrin dimers as versatile frameworks, with electronic features and site-specific coordination chemistry controlled through asymmetry. These findings position carbaporphyrin dimers as promising candidates for advances in electronic structure studies, coordination chemistry, materials science, and beyond.

Synthesis of Fluorescent, Dumbbell-Shaped Polyurethane Homo- and Heterodendrimers and Their Photophysical Properties

Fluorescent dendrimers have wide applications in biomedical and materials science. Here, we report the synthesis of fluorescent polyurethane homodendrimers and Janus dendrimers, which often pose challenges due to the inherent reactivity of isocyanates. Polyurethane dendrons (G1-G3) were synthesized via a convergent method using a one-pot multicomponent Curtius reaction as a crucial step to establish urethane linkages. The alkyne periphery of the G1-G3 dendrons was modified by a copper catalyzed azide-alkyne click reaction (CuAAC) to form fluorescent dendrons. In the reaction of the surfaces functionalized two different dendrons with a difunctional core, a mixture of three dendrimers consisting of two homodendrimers and a Janus dendrimer were obtained. The Janus dendrimer accounted for a higher proportion in the products' distribution, being as high as 93% for G3. The photophysical properties of Janus dendrimers showed the fluorescence resonance energy transfer (FRET) from one to the other fluorophore of the dendrimer. The FRET observation accompanied by a large Stokes shift make these dendrimers potential candidates for the detection and tracking of interactions between the biomolecules, as well as potential candidates for fluorescence imaging.

Self-Assembled Amphiphilic Janus Double Metallacycle

A double metallacycle was prepared via the size-selective integrative self-sorting of four different building blocks driven by a reversible metal-ligand coordination interaction. A hydrophobic dendron was placed on a metallacycle and a hydrophilic dendron was attached to the other metallacycle, producing a two-faced Janus-type supramolecule with two distinct functionalities. In aqueous media, hierarchical self-assembly of the supramolecular system was induced by the combination of coordination interactions and hydrophobic-hydrophilic interactions resulting in the formation of micrometer-sized fiber-like structures, a morphology distinct from metallacycles bearing only one type of functionality. This study provides a versatile approach for the construction of Janus-type molecules and demonstrates that integrative self-sorting of a supramolecular coordination system can be utilized for the preparation of complex supramolecular systems with predesigned functionalities and morphologies.

High-Generation Amphiphilic Janus-Dendrimers as Stabilizing Agents for Drug Suspensions

Pharmaceutical nanosuspensions are formed when drug crystals are suspended in aqueous media in the presence of stabilizers. This technology offers a convenient way to enhance the dissolution of poorly water-soluble drug compounds. The stabilizers exert their action through electrostatic or steric interactions, however, the molecular requirements of stabilizing agents have not been studied extensively. Here, four structurally related amphiphilic Janus-dendrimers were synthesized and screened to determine the roles of different macromolecular domains on the stabilization of drug crystals. Physical interaction and nanomilling experiments have substantiated that Janus-dendrimers with fourth generation hydrophilic dendrons were superior to third generation analogues and Poloxamer 188 in stabilizing indomethacin suspensions. Contact angle and surface plasmon resonance measurements support the hypothesis that Janus-dendrimers bind to indomethacin surfaces via hydrophobic interactions and that the number of hydrophobic alkyl tails determines the adsorption kinetics of the Janus-dendrimers. The results showed that amphiphilic Janus-dendrimers adsorb onto drug particles and thus can be used to provide steric stabilization against aggregation and recrystallization. The modular synthetic route for new amphiphilic Janus-dendrimers offers, thus, for the first time a versatile platform for stable general-use stabilizing agents of drug suspensions.

Modular synthesis of self-assembling Janus-dendrimers and facile preparation of drug-loaded dendrimersomes

Materials and methods aimed at the next generation of nanoscale carriers for drugs and other therapeutics are currently in great demand. Yet, creating these precise molecular arrangements in a feasible and straightforward manner represents a remarkable challenge. Herein we report a modular synthetic route for amphiphilic Janus-dendrimers via a copper-catalyzed click reaction (CuAAC) and a facile procedure, using simple injection, to obtain highly uniform dendrimersomes with efficient loading of the model drug compound propranolol. The resulting assemblies were analyzed by dynamic light scattering and cryogenic transmission electron microscopy revealing the formation of unilamellar and multilamellar dendrimersomes. The formation of a bilayer structure was confirmed using cryo-TEM and confocal microscopy visualization of an encapsulated solvatochromic dye (Nile Red). The dendrimersomes reported here are tunable in size, stable over time and display robust thermal stability in aqueous media. Our results expand the scope of dendrimer-based supramolecular colloidal systems and offer the means for one-step fabrication of drug-loaded dendrimersomes in the size range of 90-200 nm, ideal for biomedical applications.

Mimicking Complex Biological Membranes and Their Programmable Glycan Ligands with Dendrimersomes and Glycodendrimersomes

Synthetic vesicles have been assembled and coassembled from phospholipids, their modified versions, and other single amphiphiles into liposomes, and from block copolymers into polymersomes. Their time-consuming synthesis and preparation as stable, monodisperse, and biocompatible liposomes and polymersomes called for the elaboration of new synthetic methodologies. Amphiphilic Janus dendrimers (JDs) and glycodendrimers (JGDs) represent the most recent self-assembling amphiphiles capable of forming monodisperse, stable, and multifunctional unilamellar and multilamellar onion-like vesicles denoted dendrimersomes (DSs) and glycodendrimersomes (GDSs), dendrimercubosomes (DCs), glycodendrimercubosomes (GDCs), and other complex architectures. Amphiphilic JDs consist of hydrophobic dendrons connected to hydrophilic dendrons and can be thought of as monodisperse oligomers of a single amphiphile. They can be functionalized with a variety of molecules such as dyes, and, in the case of JGDs, with carbohydrates. Their iterative modular synthesis provides efficient access to sequence control at the molecular level, resulting in topologies with specific epitope sequence and density. DSs, GDSs, and other architectures from JDs and JGDs serve as powerful tools for mimicking biological membranes and for biomedical applications such as targeted drug and gene delivery and theranostics. This Review covers all aspects of the synthesis of JDs and JGDs and their biological activity and applications after assembly in aqueous media.

An emerging class of amphiphilic dendrimers for pharmaceutical and biomedical applications: Janus amphiphilic dendrimers

In recent years, a new class of dendrimer, known as Janus dendrimers (JDs), has attracted much attention due to their different structures and properties to the conventional symmetric forms. The broken symmetry of JDs offers the opportunity to form complex self-assembled materials, and presents new sets of properties that are presently inconceivable for homogeneous or symmetrical dendrimers. Due to their unique features, JDs have a promising future in pharmaceutical and biomedical fields, as seen from the recent interest in their application in conjugating multiple drugs and targeting moieties, forming supramolecular hydrogels, enabling micellar delivery systems, and preparing nano-vesicles, known as dendrimersomes, for drug encapsulation. The present paper is the first review, with an emphasis on various emerging applications of JDs, in the drug delivery and biomedical field reported so far. In addition, the paper describes different synthetic methods for producing JDs that can guide the design of new biocompatible forms with pharmacological activities, and that have the potential to be nano drug delivery vehicles. Furthermore, future studies to optimize the applications of JDs in drug delivery sciences and biomedical field to realize their potential to treat various disease conditions are identified and highlighted. Overall, this review identifies the current status of JDs in terms of their synthesis and applications, as well as the future research for their translation into macromolecules for clinical applications to solve health problems. It highlights the future combined efforts needed to be taken by dendrimer chemists, formulation scientist and microbiologists to develop novel antibacterials and nanomedicines from JDs.

A review of solute encapsulating nanoparticles used as delivery systems with emphasis on branched amphipathic peptide capsules

Various strategies are being developed to improve delivery and increase the biological half-lives of pharmacological agents. To address these issues, drug delivery technologies rely on different nano-sized molecules including: lipid vesicles, viral capsids and nano-particles. Peptides are a constituent of many of these nanomaterials and overcome some limitations associated with lipid-based or viral delivery systems, such as tune-ability, stability, specificity, inflammation, and antigenicity. This review focuses on the evolution of bio-based drug delivery nanomaterials that self-assemble forming vesicles/capsules. While lipid vesicles are preeminent among the structures; peptide-based constructs are emerging, in particular peptide bilayer delimited capsules. The novel biomaterial-Branched Amphiphilic Peptide Capsules (BAPCs) display many desirable properties. These nano-spheres are comprised of two branched peptides-bis(FLIVI)-K-KKKK and bis(FLIVIGSII)-K-KKKK, designed to mimic diacyl-phosphoglycerides in molecular architecture. They undergo supramolecular self-assembly and form solvent-filled, bilayer delineated capsules with sizes ranging from 20 nm to 2 μm depending on annealing temperatures and time. They are able to encapsulate different fluorescent dyes, therapeutic drugs, radionuclides and even small proteins. While sharing many properties with lipid vesicles, the BAPCs are much more robust. They have been analyzed for stability, size, cellular uptake and localization, intra-cellular retention and, bio-distribution both in culture and in vivo.

Bioactive cell-like hybrids coassembled from (glyco)dendrimersomes with bacterial membranes

A library of amphiphilic Janus dendrimers including two that are fluorescent and one glycodendrimer presenting lactose were used to construct giant dendrimersomes and glycodendrimersomes. Coassembly with the components of bacterial membrane vesicles by a dehydration-rehydration process generated giant cell-like hybrid vesicles, whereas the injection of their ethanol solution into PBS produced monodisperse nanometer size assemblies. These hybrid vesicles contain transmembrane proteins including a small membrane protein, MgrB, tagged with a red fluorescent protein, lipopolysaccharides, and glycoproteins from the bacterium Escherichia coli. Incorporation of two colored fluorescent probes in each of the components allowed fluorescence microscopy to visualize and demonstrate coassembly and the incorporation of functional membrane channels. Importantly, the hybrid vesicles bind a human galectin, consistent with the display of sugar moieties from lipopolysaccharides or possibly glycosylated membrane proteins. The present coassembly method is likely to create cell-like hybrids from any biological membrane including human cells and thus may enable practical application in nanomedicine.

Novel stable dendrimersome formulation for safe bioimaging applications

Dendrimersomes are nanosized vesicles constituted by amphiphilic Janus dendrimers (JDs), which have been recently proposed as innovative nanocarriers for biomedical applications. Recently, we have demonstrated that dendrimersomes self-assembled from (3,5)12G1-PE-BMPA-G2-(OH)8 dendrimers can be successfully loaded with hydrophilic and amphiphilic imaging contrast agents. Here, we present two newly synthesized low generation isomeric JDs: JDG0G1(3,5) and JDG0G1(3,4). Though less branched than the above-cited dendrimers, they retain the ability to form self-assembled, almost monodisperse vesicular nanoparticles. This contribution reports on the characterization of such nanovesicles loaded with the clinically approved MRI probe Gadoteridol and the comparison with the related nanoparticles assembled from more branched dendrimers. Special emphasis was given to the in vitro stability test of the systems in biologically relevant media, complemented by preliminary in vivo data about blood circulation lifetime collected from healthy mice. The results point to very promising safety and stability profiles of the nanovesicles, in particular for those made of JDG0G1(3,5), whose spontaneous self-organization in water gives rise to a homogeneous suspension. Importantly, the blood lifetimes of these systems are comparable to those of standard liposomes. By virtue of the reported results, the herein presented nanovesicles augur well for future use in a variety of biomedical applications.

Self-assembling amphiphilic Janus dendrimers: mesomorphic properties and aggregation in water

The hydrophobic/hydrophilic balance in amphiphilic Janus dendrimers tunes their self-assembly in bulk and in water.

Silica-coated Au@ZnO Janus particles and their stability in epithelial cells

Multicomponent particles have emerged in recent years as new compartmentalized colloids with two sides of different chemistry or polarity that have opened up a wide field of unique applications in medicine, physics and chemistry.

Multifunctional two-photon active silica-coated Au@MnO Janus particles for selective dual functionalization and imaging

Monodisperse multifunctional and nontoxic Au@MnO Janus particles with different sizes and morphologies were prepared by a seed-mediated nucleation and growth technique with precise control over domain sizes, surface functionalization, and dye labeling. The metal oxide domain could be coated selectively with a thin silica layer, leaving the metal domain untouched. In particular, size and morphology of the individual (metal and metal oxide) domains could be controlled by adjustment of the synthetic parameters. The SiO2 coating of the oxide domain allows biomolecule conjugation (e.g., antibodies, proteins) in a single step for converting the photoluminescent and superparamagnetic Janus nanoparticles into multifunctional efficient vehicles for theranostics. The Au@MnO@SiO2 Janus particles were characterized using high-resolution transmission electron microscopy (HR-)TEM, powder X-ray diffraction (PXRD), optical (UV-vis) spectroscopy, confocal laser fluorescence scanning microscopy (CLSM), and dynamic light scattering (DLS). The functionalized nanoparticles were stable in buffer solution or serum, showing no indication of aggregation. Biocompatibility and potential biomedical applications of the Au@MnO@SiO2 Janus particles were assayed by a cell viability analysis by coincubating the Au@MnO@SiO2 Janus particles with Caki 1 and HeLa cells. Time-resolved fluorescence spectroscopy in combination with CLSM revealed the silica-coated Au@MnO@SiO2 Janus particles to be highly two-photon active; no indication for an electronic interaction between the dye molecules incorporated in the silica shell surrounding the MnO domains and the attached Au domains was found; fluorescence quenching was observed when dye molecules were bound directly to the Au domains.

Dendrimersomes: a new vesicular nano-platform for MR-molecular imaging applications

Vesicles formed by Janus dendrimers (dendrimersomes) loaded with hydrophilic or amphiphilic MRI probes show great potential as an efficient novel MRI nanosystem.

Fabrication of polymeric Janus particles by droplet microfluidics

This review presents a short description of the polymeric Janus particles fabricated by droplet microfluidics.

Dendrimersomes with photodegradable membranes for triggered release of hydrophilic and hydrophobic cargo

Amphiphilic Janus dendrimers with fully photodegradable hydrophobic blocks were synthesized and assembled into dendrimersomes in water. Irradiation with UV light triggered the release of hydrophobic and hydrophilic cargo.

Modular synthesis of amphiphilic Janus glycodendrimers and their self-assembly into glycodendrimersomes and other complex architectures with bioactivity to biomedically relevant lectins

The modular synthesis of 7 libraries containing 51 self-assembling amphiphilic Janus dendrimers with the monosaccharides D-mannose and D-galactose and the disaccharide D-lactose in their hydrophilic part is reported. These unprecedented sugar-containing dendrimers are named amphiphilic Janus glycodendrimers. Their self-assembly by simple injection of THF or ethanol solution into water or buffer and by hydration was analyzed by a combination of methods including dynamic light scattering, confocal microscopy, cryogenic transmission electron microscopy, Fourier transform analysis, and micropipet-aspiration experiments to assess mechanical properties. These libraries revealed a diversity of hard and soft assemblies, including unilamellar spherical, polygonal, and tubular vesicles denoted glycodendrimersomes, aggregates of Janus glycodendrimers and rodlike micelles named glycodendrimer aggregates and glycodendrimermicelles, cubosomes denoted glycodendrimercubosomes, and solid lamellae. These assemblies are stable over time in water and in buffer, exhibit narrow molecular-weight distribution, and display dimensions that are programmable by the concentration of the solution from which they are injected. This study elaborated the molecular principles leading to single-type soft glycodendrimersomes assembled from amphiphilic Janus glycodendrimers. The multivalency of glycodendrimersomes with different sizes and their ligand bioactivity were demonstrated by selective agglutination with a diversity of sugar-binding protein receptors such as the plant lectins concanavalin A and the highly toxic mistletoe Viscum album L. agglutinin, the bacterial lectin PA-IL from Pseudomonas aeruginosa, and, of special biomedical relevance, human adhesion/growth-regulatory galectin-3 and galectin-4. These results demonstrated the candidacy of glycodendrimersomes as new mimics of biological membranes with programmable glycan ligand presentations, as supramolecular lectin blockers, vaccines, and targeted delivery devices.

A new family of bent-core C2-symmetric liquid crystals

A series of C2-symmetric compounds with different core sizes and varying lengths and numbers of alkoxy side chains were prepared, and the factors influencing their liquid crystalline mesophase behaviour were investigated. The compounds studied were based on benzophenone, dibenzylidene-acetone, and 1,9-diphenyl-nona-1,3,6,8-tetraen-5-one cores with either 1 or 2 linear alkoxy side chains. The side chains were varied in length from C6H13 to C12H25. The liquid crystalline mesophase behaviour of the compounds was investigated using differential scanning calorimetry, polarizing optical microscopy, and small-angle X-ray scattering (SAXS). It was found that a number of the molecules were able to self-assemble into smectic and nematic liquid crystalline phases.

Janus-type dendrimer-like poly(ethylene oxide)s

A straightforward and original methodology allowing the synthesis of Janus-type dendrimer-like poly(ethylene oxide)s (PEOs) carrying orthogonal functional groups on their surface is described. The use of 3-allyloxy-1,2-propanediol (1) as a latent AB2-type heterofunctional initiator of anionic ring-opening polymerization (AROP) of ethylene oxide (EO) and of selective branching agents of PEO chain ends served to construct the two dendrons of these dendrimer-like PEOs, following a divergent pathway. Thus, the first PEO generation of the first dendron was grown by AROP from 1 followed by the reaction of the corresponding alpha-allyl,omega,omega'-bishydroxy- heterofunctional PEO derivative with 2-(3'-chloromethybenzyloxymethyl)-2-methyl-5,5-dimethyl-1,3-dioxane (2) used as a branching agent. This afforded the dendron A with four latent peripheral hydroxyls protected in the form of two ketal rings. The remaining alpha-allylic double bond of the PEO thus prepared was transformed into two hydroxyl groups using OsO4 in order to create the first PEO generation of the dendron B by AROP of EO. Allyl chloride (3) was then used as another (latent) branching agent to react with the terminal hydroxyl of the corresponding PEO chains. Deprotection under acidic conditions of the ketal groups of dendron A, followed by AROP of EO, afforded the second PEO generation on this face. This alternate and divergent procedure, combining AROP of EO and selective branching of PEO branches, could be readily iterated, one dendron after the other up to the generation six, leading to a Janus-type dendrimer-like PEO exhibiting a total mass of around 300 kg/mol and possessing 64 peripheral groups on each face. The possibility of orthogonal functionalization of the surfaces of such Janus-type dendritic PEOs was exploited. Indeed, a dendron of generation 4 was functionalized with hydroxyl functions at its periphery, whereas the other was end-capped with either tertiary amino or disulfide groups. In a variant of this strategy, azido groups and acetylene could also be orthogonally introduced at the periphery of the fourth generation Janus-type dendrimer-like PEO and subjected to polycondensation by a 1,3-dipolar cycloaddition reaction. This afforded a necklace-like covalent assembly of dendrimer-like PEOs through the formation of stable [1,2,3]-triazole linkages.

Supramolecular Self-Organization of “Janus-like” Diblock Codendrimers: Synthesis, Thermal Behavior, and Phase Structure Modeling

We report on the design and synthesis of three series of segmented amphiphilic block codendrimers, and on their self-organizing behavior in liquid-crystalline mesophases. Connecting two prefunctionalized monodendrons, each differing in their chemical constitution and generation number, yielded these diblock supermolecules. One wedge of the codendrimer was made hydrophobic, and is based on a branched poly(benzyl ether) monodendron functionalized at the periphery by lipophilic aliphatic fragments (also known as Percec dendrons). The other segment was made hydrophilic by the grafting of hydroxyl-containing moieties onto the focal functions of the former dendrons. Both types of dendrons were prepared independently by convergent methods and then joined in the ultimate stage of the synthetic procedure by cross-coupling reactions. In this way, the proportion of the dendritic blocks was varied independently to allow control of the hydrophilic/hydrophobic balance (HHB), the hydrogen-bonding ability, and consequently the capacity to tune the mesomorphic properties of the resulting "superamphiphiles" was anticipated. Essentially all the dendritic compounds display a thermotropic mesomorphism directly at or near room temperature as determined by using X-ray diffraction, polarized optical microscopy, and differential scanning calorimetry. The nature and the supramolecular organization of the mesophases, namely columnar and cubic phases, are correlated to the size of the respective block monodendrons and the chemical structures of the dendromesogens. The molecular organization within the cubic phases can be geometrically described and well understood by the space-filling polyhedron model.

Janus and Ternary Particles Generated by Microfluidic Synthesis: Design, Synthesis, and Self-Assembly

This paper reports a microfluidic method for fast continuous synthesis of Janus particles and three-phase particles with narrow size distribution. Synthesis of particles included emulsification of monomer liquids and in-situ photoinitiated polymerization of multiphase droplets. We show the strategy for precise control over the structure of Janus particles and their structure-dependent assembly in clusters. We demonstrate an asymmetric chemical modification of the surface of JPs by conjugating them with protein molecules. The Janus and ternary particles were synthesized from largely immiscible liquids and had a sharp interface between the constituent phases.

A Divergent Route to Diversity in Macromolecules

[reaction: see text] A synthetic route for obtaining functional group diversity in macromolecules is described. The route relies on the differential reactivity of substituted dichlorotriazines. Treatment of a triamine core with substituted dichlorotriazines cleanly yields tris(monochlorotriazines). Subsequent S(N)Ar reactions with amine nucleophiles bearing the functional group of interest yield diversity. If the substituent on the dichlorotriazine is a protected nucleophile, deprotection of the functionalized core allows for iterative reactions and the synthesis of star, dendritic, and hybrid macromolecules.

Self-organization and pattern formation of janus particles in two dimensions by computer simulations

The phase behavior and associated pattern formation of two-dimensional systems of hard disks decorated with amphiphilic coronae (Janus disks) are studied by means of Monte Carlo computer simulations. A primitive interaction potential that captures the essential interparticle interactions is introduced. Despite its simplicity, the system exhibits a very rich phase polymorphism. Apart from the isotropic phase and depending upon the coronal thickness, the simulated systems self-organize in a number of two-dimensional mesophases of various symmetries exhibiting a variety of novel patterns. The results of these simulations suggest that 2D Janus particles are promising candidates for bottom-up design of precise two-dimensional templates.