A “Reactive” Ratiometric Fluorescent Probe for Mercury Species

Fluorescent Probes Based on Charge and Proton Transfer for Probing Biomolecular Environment

Fluorescent probes for sensing fundamental properties of biomolecular environment, such as polarity and hydration, help to study assembly of lipids into biomembranes, sensing interactions of biomolecules and imaging physiological state of the cells. Here, we summarize major efforts in the development of probes based on two photophysical mechanisms: (i) an excited-state intramolecular charge transfer (ICT), which is represented by fluorescent solvatochromic dyes that shift their emission band maximum as a function of environment polarity and hydration; (ii) excited-state intramolecular proton transfer (ESIPT), with particular focus on 5-membered cyclic systems, represented by 3-hydroxyflavones, because they exhibit dual emission sensitive to the environment. For both ICT and ESIPT dyes, the design of the probes and their biological applications are summarized. Thus, dyes bearing amphiphilic anchors target lipid membranes and report their lipid organization, while targeting ligands direct them to specific organelles for sensing their local environment. The labels, amino acid and nucleic acid analogues inserted into biomolecules enable monitoring their interactions with membranes, proteins and nucleic acids. While ICT probes are relatively simple and robust environment-sensitive probes, ESIPT probes feature high information content due their dual emission. They constitute a powerful toolbox for addressing multitude of biological questions.

A Reaction-Based ESIPT Fluorescent Probe for the Detection of Hg2+ with Large Stokes Shift

A novel reaction-based fluorescent probe 1 for Hg2+ was designed and synthesized. 1 was almost nonfluoresent due to inhibition of the ESIPT process between hydroxy group and imid carbonyl oxygen by diphenylphosphinothioate group. After reacting with Hg2+, the fluorescence intensity of 1 exhibited significant enhancement owing to recovery of the ESIPT process via Hg2+-promoted desulfurization-hydrolysis of the diphenylphosphinothioate moiety and cleavage of the P-O bond. 1 not only showed rapid response, high sensitivity, excellent selectivity for Hg2+ over other metal ions, but also could detect Hg2+ with large Stokes shift (165 nm), which was attributed to the ESIPT process. Moreover, the reaction mechanism was fully validated by absorption spectra, fluorescence spectra, fluorescence color as well as ESI-MS analysis. 1 is the reaction-based ESIPT fluorescent probe for the detection of Hg2+ with large Stokes shift, rapid response, high sensitivity and selectivity.

A mitochondrion-targeted fluorescent probe based on ESIPT phthalimide for the detection of Hg2+ with large Stokes shift

A novel mitochondrion-targeted Hg2+-specific fluorescent probe 1 based on ESIPT phthalimide was designed and synthesized for the first time. Owing to the blockage of the ESIPT process between the hydroxy group and the carbonyl oxygen of the imide by the diphenylphosphinothioate group, 1 was almost nonfluorescent. After reacting with Hg2+, 1 exhibited a dramatic fluorescence enhancement due to the recovery of the ESIPT process through Hg2+-induced desulfurization-hydrolysis of the diphenylphosphinothioate moiety and the cleavage of the P-O bond. 1 showed a large Stokes shift, rapid response and high sensitivity and selectivity for Hg2+ over other metal ions. Moreover, 1 was successfully employed to image Hg2+ in the mitochondria of living cells.

Recent advances in fluorescent materials for mercury(ii) ion detection

Invading mercury would cause many serious health hazards such as kidney damage, genetic freak, and nerve injury to human body. Thus, developing highly efficient and convenient mercury detection methods is of great significance for environmental governance and protection of public health. Motivated by this problem, various testing technologies for detecting trace mercury in the environment, food, medicines or daily chemicals have been developed. Among them, the fluorescence sensing technology is a sensitive and efficient detection method for detecting Hg2+ ions due to its simple operation, rapid response and economic value. This review aims to discuss the recent advances in fluorescent materials for Hg2+ ion detection. We reviewed the Hg2+ sensing materials and divided them into seven categories according to the sensing mechanism: static quenching, photoinduced electron transfer, intramolecular charge transfer, aggregation-induced emission, metallophilic interaction, mercury-induced reactions and ligand-to-metal energy transfer. The challenges and prospects of fluorescent Hg2+ ion probes are briefly presented. We hope that this review can provide some new insights and guidance for the design and development of novel fluorescent Hg2+ ion probes to promote their applications.

Monitoring Hg2+ and MeHg+ poisoning in living body with an activatable near-infrared II fluorescence probe

Noninvasively imaging mercury poisoning in living organisms is critical to understanding its toxicity and treatments. Especially, simultaneous fluorescence imaging of Hg²⁺ and MeHg⁺in vivo is helpful to disclose the mysteries of mercury poisoning. The key limitation for mercury imaging in vivo is the low imaging signal-to-background ratio (SBR) and limited imaging depth, which may result in unreliable detection results. Here, we designed and prepared a near-infrared II (NIR II) emissive probe, NIR-Rh-MS, leveraging the "spirolactam ring-open" tactic of xanthene dyes for in situ visualization of mercury toxicity in mice. The probe produces a marked fluorescence signal at 1015 nm and displays good linear responses to Hg²⁺ and MeHg⁺ with excellent sensitivity, respectively. The penetration experiments elucidate that the activated NIR-II fluorescence signal of the probe penetrates to a depth of up to 7 mm in simulated tissues. Impressively, the probe can monitor the toxicity of Hg²⁺ in mouse livers and the accumulation of MeHg⁺ in mouse brains via intravital NIR-II imaging for the first time. Thus, we believe that detecting Hg²⁺ and MeHg⁺ in different organs with a single NIR-II fluorescence probe in mice would assuredly advance the toxicologic study of mercury poisoning in vivo.

An ESIPT-based reversible ratiometric fluorescent sensor for detecting HClO/H2S redox cycle in living cells

HClO and H₂S, as two kinds of crucial small biomolecules, are endowed various roles in biological organisms. The redox balance between HClO and H₂S is closely related to the physiological and pathological processes. Thus, it is significant to monitor the redox process between HClO and H₂S. Inspired by the advantages of ratiometric fluorescent probes, we firstly developed a reversible ratiometric fluorescent probe (BT-Se) for HClO and H₂S via combination of phenyl selenide as the response group and 2-(2'-hydroxyphenyl)benzothiazole dye as the fluorophore. The proposed probe BT-Se could detect HClO with well-separated dual emission (110 nm), fast response, good selectivity and sensitivity owing to the oxidation reaction of the Se atom induced by HClO. Moreover, only H₂S could effectively recover the fluorescence of the detection system to the original state via H₂S induced-reduction of selenoxide. Cell imaging studies demonstrated that the probe BT-Se was capable of ratiometric monitoring the changes of intracellular HClO/H₂S, which suggested that it has great potential for researching the biological functions of HClO and H₂S.

Revealing the mechanisms of mercury adsorption on metal-doped kaolinite(001) surfaces by first principles

Natural kaolinite exhibit high affinity for heavy metals while the interaction mechanisms in the presence of heteroatoms remain largely elusive, which are tackled by first principles. In this paper, three common dopants (Mg, Ca, Fe) were employed to construct metal-doped kaolinite(001) (K(001)) surfaces. We found that Mg-doped K(001) was the most stable surface in terms of thermal stability and structural analysis, consistent with the pervasive isomorphic substitution in kaolinite minerals. The interaction of mercury with Mg-doped K(001) surface was investigated in the form of predominant top-site and bridge-site models. The effects of chloride on the interaction were also studied. The results demonstrated that the strongest adsorption occured in the present of dopants and the absence of chloride. The electronic properties revealed a significant charge transfer (up to 1.28 electrons) and chemisorption character at the interfaces when dopants were introduced, which could be ascribed to the overlapping of Hg-5d and O_s-2p (surface O) orbitals in the range of -7.5 eV to +0.5 eV. Additionally, the chloride had a profoundly adverse influence on mercury adsorption due to the upward shift of Hg-6s and Hg-6p orbitals. The studies are beneficial to understand the interaction mechanisms of natural minerals toward environmental pollutants in actual applications.

Dual-channel colorimetric fluorescent probe for determination of hydrazine and mercury ion

Hydrazine and mercury (Hg) poisoning represented a serious hazard to human health. So, developing method to detect and recognize them is highly desirable. Here, we prepared a multifunctional colorimetric and fluorescent probe (PI-Rh) consisting of a phenanthroimidazole (PI) dye conjugated with a Rhodamine (Rh) group for the effective recognition of hydrazine and Hg²⁺, induvidually and collectively, with different colorimetric and fluorescence outputs. Probe PI-Rh displays low detection limits measured to be 0.0632 μM (~2 ppb) and 0.0101 μM (~2 ppb) respectively for hydrazine and Hg²⁺ with high selectivity and excellent sensitivity. Moreover, the experimental results indicated that the superiority of this probe lied in its wide applications, for example, successful response in real water, and soil analysis. Interestingly, an visual, rapid, and real-time detection of gaseous hydrazine can be realized with 0.2793 μM detection limit using the facile PI-Rh-impregnated test paper.

A novel coumarin-based colorimetric and fluorescent probe for detecting increasing concentrations of Hg2+ in vitro and in vivo

Mercury has complex biological toxicity and can cause a variety of physiological diseases and even death, so it is of great importance to develop novel strategies for detecting trace mercury in environmental and biological samples. In this work, we designed a new coumarin-based colorimetric and fluorescent probe CNS, which could be obtained from inexpensive starting materials with high overall yield in three steps. Probe CNS could selectively respond to Hg²⁺ with obvious color and fluorescence changes, and the presence of other metal ions had no effect on the fluorescence changes. Probe CNS also exhibited high sensitivity against Hg²⁺, with a detection limit as low as 2.78 × 10^-8 M. More importantly, the behavioral tracks of zebrafish had no obvious changes upon treatment with 10 μM probe CNS, thus indicating its low toxicity. The probe showed potential application value and was successfully used for detecting Hg²⁺ in a test strip, HeLa cells and living zebrafish larvae.

Pyran based bipodal D–π–A systems: colorimetric and ratiometric sensing of mercury – experimental and theoretical approach

Reversible and selective Hg2+ ion complexation of the two pyran based colorimetric and fluorescent ratiometric probes.

Recent Advances in the Synthesis and Applications of 2-Arylbenzothiazoles

This review firstly covers the applications of 2-arylbenzothiazoles as amyloid imaging agents, antitumor agents, and organic luminescent materials. Then we review the recent advances in the synthesis of 2-arylbenzothiazole derivatives. On the one hand, we introduce the approaches for construction of the 2-arylbenzothiazole core, including the following categories: (i) classic condensation of 2-aminothiophenols, (ii) direct arylation of benzothiazoles, (iii) intramolecular cyclization of thiobenzanilides, and (iv) tandem cyclization of anilines/ nitroarenes­ with elemental sulfur or sulfides. On the other hand, the transition-metal-catalyzed direct C–H functionalizations of 2-aryl­benzothiazoles are also involved in this review.

1 Introduction

2 Applications of 2-Arylbenzothiazoles

3 Construction of the 2-Arylbenzothiazole Core

4 Synthesis 2-Arylbenzothiazoles via Direct C–H Functionalization

5 Conclusion

Current advances in the synthetic strategies of 2-arylbenzothiazole

Benzothiazole is a privileged scaffold in the field of synthetic and medicinal chemistry. Its derivatives and metal complexes possess a gamut of pharmacological properties and high degree of structural diversity that has proven it vital for the investigation for novel therapeutics. The 2nd position of benzothiazole is the most active site that makes 2-arylbenzothiazole as felicitous scaffolds in pharmaceutical chemistry. The extensive significance of benzo-fused heterocyclic moieties formation has led to broad and valuable different approaches for their synthesis. This review deals with the synthetic approaches developed so far for the synthesis of 2-arylbenzothiazoles. Moreover, this article abridges the publications devoted to the synthesis of this moiety over the last 6 years. This study gives a current precis of research on the fabrication of 2-arylbenzothiazoles through different synthetic pathways and shall be helpful for researchers and scientists who are working in this field to make more potent biologically active benzothiazole-based drugs.

A dual thiourea-appended perylenebisimide "turn-on" fluorescent chemosensor with high selectivity and sensitivity for Hg2+ in living cells

Sensing heavy metal ions particularly for the most toxic Hg²⁺ is a long-term pursuit for chemists because of its obvious and extreme harmfulness to both the environment and human health. Herein, a novel 'turn-on' perylenebisimide-thiourea fluorescent probe PBI-BTB is achieved for rapid detection of Hg²⁺ in a DMSO/H₂O (5/1, v/v) solution through a typical Hg²⁺-promoting desulfurization reaction, which has been investigated through Job's plot titration, FT-IR, ¹H NMR and HRMS analysis. A remarkable fluorescence emission enhancement at 540 and 580 nm is observed in the presence of Hg²⁺, which is visible to the naked eye with high selectivity and sensitivity. Moreover, probe PBI-BTB combined strong anti-interference recognition with short response time (< 1 min). The rapid fluorescence response with low limit of detection (0.35 μM) in a wide pH range of 3.0-11.0 makes PBI-BTB a promising candidate for detection of Hg²⁺ without any buffer system. Furthermore, the practicability of probe PBI-BTB upon the Hg²⁺ recognition in human liver cancer cells (HepG-2) has been studied through fluorescent live cell imaging which reveals the probe's low toxicity to organism as well as the favorable cell permeability of PBI-BTB for detecting Hg²⁺ in biological systems.

Employing an ICT-ESIPT strategy for ratiometric tracking of HClO based on sulfide oxidation reaction

Hypochlorous acid (HOCl) acts as crucial roles in pathologica processes and relevant diseases. Thus, it is meaningful to explore a reliable method for monitoring HClO in biosystem. In this work, a ratiometric fluorescent probe 2-(benzo[d]thiazol-2-yl)-4-(methylthio)phenol (BTMSP) has been constructed for HClO by adopting ICT-ESIPT strategy. The probe possessed itself red fluorescence due to the electron-donating capability of sulfur atom and showed remarkable blue fluorescence response to HClO by oxidizes the sulfur atom to a sulfoxide. The ratiometric probe exhibited highly specific, rapid response and excellent sensitivity toward HClO as well as a low detection limit (4.2 × 10^-7 M). Moreover, the ratiometric probe showed well-separated dual emission (450/580), and a large pseudo Stokes shift (190 nm). In addition, the probe was used for the imaging of HClO with satisfying results.

Imaging Hg2+-Induced Oxidative Stress by NIR Molecular Probe with "Dual-Key-and-Lock" Strategy

Mercury (Hg) is considered an extremely toxic heavy metal which is extremely harmful to both the human body and environment. In addition, Hg²⁺-induced oxidative stress also exerts a crucial role to play in pathophysiological mechanisms of mercury toxicity. Thus, efficient and specific fluorescent probes for imaging Hg²⁺-induced oxidative stress are necessary. In the present study, we rationally design a novel Hg²⁺-activated and ICT-based NIR emission fluorescent probe NIR-HO for sequentially monitoring the ONOO^- level with a "dual-key-and-lock" strategy. The probe NIR-HO showed rapid response and excellent specificity and sensitivity for the detection of Hg²⁺ and ONOO^- in vitro. Cell imaging demonstrated that Hg²⁺-induced oxidative stress was involved in ONOO^- upregulation. Also, GSH, NAC, and EDTA were employed as excellent detoxifying drugs against Hg²⁺-induced toxicity. Moreover, the probe NIR-HO was successfully used for imaging Hg²⁺ and ONOO^- in vivo. In brief, NIR-HO provides a simple and powerful approach which can be used to image Hg²⁺-induced oxidative stress in the pathological environment.

Recent Progress in Small-Molecule Fluorescent Probes for Detecting Mercury Ions

Mercury is a highly toxic and non-essential element that is found in every corner of the globe. The small amount of mercury produced by various pathways eventually enters freshwater and marine ecosystems, circulating through the food chain (especially fish) and causing various environmental problems in aspects including plants, animals, and human. There are several traditional quantitative methods developed for mercury ions (II) analysis in water samples. However, due to the complexity of the detection process, high cost and strong technical expertise, it is difficult to detect mercury ions in real-time. Therefore, in recent years, a large number of researchers have developed small-molecule fluorescent probes for Hg ions detection. Fluorimetry has the advantages of convenient detection, short response time, high sensitivity and good selectivity. This review summarized the small-molecule fluorescent probes for mercuric ion detection developed in recent years according to the chemical structural classification, compared their performances and elaborated the mechanism. We hope that the review will help the researches for the designs of metal ions fluorescent probes and their applications with certain reference value.

Fluorescent Detection of Methyl Mercury in Aqueous Solution and Live Cells Using Fluorescent Probe and Micelle Systems

It is highly challenging to develop fast and sensitive fluorescent methods for monitoring organic mercury in purely aqueous solutions as well as live cells. Especially, selective fluorescent detection of methylmercury over inorganic mercury ions has not been reported. We developed a fast and sensitive fluorescent detection method for Hg²⁺ ions as well as methylmercury using an amino acid-based fluorescent probe (1) and SDS micelles. The fluorescent probe in SDS micelles detected sensitively and selectively Hg²⁺ ions and methylmercury among 16 metal ions in purely aqueous solution by the enhancement of the red emission at 575 nm, and the detection of methylmercury was completed within 1 min. The probe in SDS micelles with EDTA showed highly sensitive and selective turn on detection for methylmercury over Hg²⁺. The limit of detection was 9.1 nM for Hg²⁺ (1.8 ppb, R² = 0.989) and 206 nM for CH₃Hg⁺ (R² = 0.997). 1 rapidly penetrated live cells and detected intracellular Hg²⁺ ions as well as CH₃Hg⁺ by the enhancement of both red emissions and green emissions. Subsequent treatment of EDTA into the cell confirmed the selective detection of methylmercury in the cells. The present work indicated that the fluorescent probe with micelle systems provided a fast, sensitive, and selective detection method for monitoring inorganic mercury as well as methyl mercury.

A new 3-hydroxyphthalimide-based turn-on fluorescent probe for Hg2+ detection in aqueous solution

A new 3-hydroxyphthalimide-based turn-on fluorescent probe is designed and synthesized. This probe can be used to determine the presence of Hg2+ ions by fluorescence spectroscope with high selectivity over other metal ions in aqueous solution. The analytical detection limit for Hg2+ is as low as 6.5 × 10−7 M. The recognition mechanism is attributed to Hg2+-promoted carbonothioate group cleavage and a subsequent excited-state intramolecular proton transfer mechanisms.

New colorimetric and fluorometric chemosensor for selective Hg2+ sensing in a near-perfect aqueous solution and bio-imaging

We report a new 7-nitrobenzo-2-oxa-1, 3-diazolyl (NBD)-based chemosensor containing a piperazine derivative, NBDP, for detection of mercury ions in almost 100% aqueous medium. The chemosensor shows sensing exclusively toward Hg²⁺ with a switch-on fluorescence response at 543 nm, which could be attributed to the blocking of PET (photo-induced electron transfer) process upon complexation with mercury ions. The molar ratio of Hg(Ⅱ) to NBDP in the complex is 1:1 based on the Job's plot and HRMS studies. Optimized configurations of NBDP and NBDP-Hg²⁺ complexes were simulated by means of DFT calculations. The reversible fluorescence response with low detection limit (19.2 nM) in the pH range of 6.0-7.5 renders NBDP a promising candidate for Hg²⁺ detection in neutral aqueous environments. For the practical application of the chemosensor, test strips were successfully fabricated for rapid detection of Hg²⁺ ions. Moreover, the utility of NBDP showing the mercury recognition in Human liver cancer cells (SMMC-7721) and zebrafish as well as in live tissues of Arabidopsis thaliana has been demonstrated as monitored by fluorescence imaging.

Fast and sensitive fluorescent detection of inorganic mercury species and methylmercury using a fluorescent probe based on the displacement reaction of arylboronic acid with the mercury species

We present a reaction-based fluorescent probe for Hg²⁺ and methylmercury based on the displacement reaction of arylboronic acid with mercury species.

Transition-metal-free catalytic hydroboration reduction of amides to amines

The selective catalytic reduction of amides to value-added amine products is a desirable but challenging transformation.

Sequential Detection of Palladium and Chromium Oxyanion by a Fluorescein Based Chemosensor in Mixed Aqueous Media

A new highly selective chemosensor, based on fluorescein-allyloxy benzene conjugate 1, was developed for the sequential detection of palladium and chromium oxyanions in a mixed aqueous media, and was studied by UV-visible and fluorescence spectroscopy. The sensing of palladium ions produces a chemodosimetric and ratiometric change in the emission band of 1 from 450 to 525 nm, followed by the sensing of chromate ions by 2 that quenches the emission band at 525 nm in a buffered H2O: DMF solution (9:1, pH = 7.4). The rate constants of palladium and chromate ions were found to be 8.6 × 105 M−1, 2.1 × 105 M−1, and 5.4 × 104 M−1 respectively. The chemosensor 1 has a palladium detection limit of 49 ppb while the sequential detection limit of chromate ions (CrO42− and Cr2O72−) were 127 and 259 ppb. The ratiometric change in the emission is produced due to the deallylation of 1 by palladium to produce 2 that restores the ESIPT (excited state intramolecular proton transfer) of the phenolic ring and enhances the electron transfer (ET) phenomenon from the phenolic group to fluorescein. The sequential binding of chromate ions to 2 inhibits the ESIPT and causes chelation enhanced quenching (CHEQ) of the fluorescence.

The mechanism of the excited-state proton transfer of Salicylaldehyde azine and 2,2'-[1,4-Phenylenebis{(E)- nitrilomethylidyne}] bisphenol: Via single or double proton transfer

The Salicylaldehyde azine (H₂SA) and 2,2'-[1,4-Phenylenebis{(E)-nitrilomethylidyne}] bisphenol (H₂SPA) with double proton transfer characteristics were synthesized recently (Phys. Chem. Chem. Phys., 2018, 20, 23,762). However, the detailed theoretical interpretation of proton transfer (PT) mechanism is inadequate. In the present work, density functional theory (DFT) and time-density functional theory (TDDFT) are employed to study the proton transfer mechanism of H₂SA and H₂SPA in detail. Bond parameters, infrared (IR) spectra and frontier molecular orbitals (FMOs) calculated by PBE0/TZVP method indicate the strength of hydrogen bond is enhanced in S₁ state, which can be visualized by the reduced density gradient (RDG) analysis. The potential energy surfaces (PESs) of H₂SA and H₂SPA are also constructed. The small barriers indicate that both the single proton transfer and double proton transfer of H₂SA and H₂SPA are more likely to occur in the S₁ state. In addition, the properties of H₂SA and H₂SPA after chelation with Li⁺ have also been theoretically characterized. According to the calculated fluorescence spectra of compounds (H₂SA-Li⁺ and H₂SPA-Li⁺), it was found that only the planar structure of H₂SA-Li⁺ can form metallogel, which verified the experimental results.

Chelation of specific metal ions imparts coplanarity and fluorescence in two imidazo[1,2-a]pyridine derivatives: Potential chemosensors for detection of metal ions in aqueous and biosamples

Synthesis and chelation induced fluorescence emission from two imidazo[1,2-a]pyridine derivatives are described. The nonfluorescent molecule 1 containing N and O donor atoms, achieves coplanarity upon interactions with trivalent cations Al³⁺, Fe³⁺ and Cr³⁺, that favors fluorescence emission. Molecule 2 containing two N donor atoms attains coplanarity upon interaction with the only Zn²⁺ and becomes fluorescent. Both molecules 1 and 2 form a 1:1 complex with interacting metal ions. Other trivalent metal ions (including Bi³⁺ and In³⁺) and common divalent metal ions (including Hg²⁺ and Cd²⁺) fail to form any complex with 1 or 2, and they do not interfere in the detection of Zn²⁺, Al³⁺, Fe³⁺ or Cr³⁺ ions. Noninterference of other metal ions renders 1 and 2 suitable for the detection of fungal cells contaminated with Zn²⁺, Al³⁺, Fe³⁺ or Cr³⁺ ions.

An Endeavor in the Reaction-Based Approach to Fluorescent Probes for Biorelevant Analytes: Challenges and Achievements

The promising features of fluorescence spectroscopy have inspired a quest for fluorescent probes for analysis and monitoring of molecular interactions in biochemical, medical, and environmental sciences. To overcome the competitive supramolecular interactions in aqueous media encountered with conventional molecular-recognition-based probes, the use of reaction-based probes that involve making or breaking of covalent bonds has emerged as a complementary sensing strategy to realize higher selectivity and sensitivity with larger spectroscopic changes. In spite of the enormous efforts, the development of reaction-based fluorescent probes meets with certain challenges in terms of their practical applications, demanding "intelligent design" of probes with an appropriate fluorophore attached to an efficient reactive moiety at the right place. This Account summarizes the results of our efforts made in the development and fine-tuning of reaction-based fluorescent probes toward those goals, classified by the type of analyte (anions, metal cations, and biomolecules) with notes on the challenges and achievements. The reaction-based approach was demonstrated to be powerful for the selective sensing of anions (cyanide and (amino)carboxylates) for the first time, and later it was extended to develop two-photon probes for bisulfite and fluoride ions. The reaction-based approach also enabled selective sensing of noble metal ions such as silver, gold, and palladium along with toxic (methyl)mercury species and paramagnetic copper ions. Furthermore, microscopic imaging and monitoring of biologically relevant species with reaction-based two-photon probes were explored for hydrogen sulfide, hypochlorous acid, formaldehyde, monoamine oxidase enzyme, and ATP.

A nanomolar detection of mercury(II) ion by a chemodosimetric rhodamine-based sensor in an aqueous medium: Potential applications in real water samples and as paper strips

A new promising rhodamine based colorimetric and fluorometric chemosensor, RDV has been designed and synthesized for specific detection of Hg²⁺ ion. It acts as highly selective "turn-on" fluorescent chemosensor for Hg²⁺ ion without interference from other competitive metal ions in aqueous acetonitrile medium. The drastic color change with addition of Hg²⁺, from colorless to pink, indicates RDV can acts as "naked-eye" indicator for Hg²⁺. The Hg²⁺ promoted selective hydrolysis of appended vinyl ether group in RDV followed by Hg²⁺ chelated complex formation with concomitant opening of spirolactam ring is the plausible sensing mechanism. The detailed absorption, fluorescence, ¹H NMR, ¹³C NMR and mass spectrometry confirms the proposed sensing mechanism. The limit of detection (LOD) of Hg²⁺ by RDV is 136 nM indicating the high sensitivity towards Hg²⁺. The RDV shows consistent spectroscopic response in biological pH range 4-10. In addition to explore practical applicability of RDV, its paper strips have been made and used to detect Hg²⁺ in pure water solution up to 10 ppm level. Furthermore, the potential application of RDV for the sensing of Hg²⁺ in real water samples (tap water and drinking waters from different sources) were also monitored and demonstrated.

A highly selective and sensitive ESIPT-based coumarin–triazole polymer for the ratiometric detection of Hg2+

A reversible ESIPT based system for the detection of Hg²⁺ was developed. The system exhibited better properties compared to that of recently developed ratiometric fluorescent systems.

A two-photon fluorescent probe for colorimetric and ratiometric monitoring of mercury in live cells and tissues

Owing to the extreme toxicity of mercury, methods for its selective and sensitive sensing in solutions, and in live cells and tissues are in great demand.

A coumarin chalcone ratiometric fluorescent probe for hydrazine based on deprotection, addition and subsequent cyclization mechanism

A coumarin chalcone derivative with a levulinic acid terminal group acts as a ratiometric fluorescent probe for hydrazine based on deprotection, addition and a subsequent cyclization reaction mechanism.

ESIPT-based fluorescence probe for the rapid detection of peroxynitrite 'AND' biological thiols

An ESIPT-based 'AND' logic fluorescence probe (GSH-ABAH) was developed for the simultaneous detection of ONOO- and biological thiols. GSH-ABAH was shown to have good cell permeability and with the addition of just SIN-1 (ONOO- donor) or GSH, no fluorescence response was observed in live cells. However, in the presence of both analytes GSH-ABAH could be used to image exogenous ONOO- 'AND' GSH added to RAW264.7 cells.

Applications of Nanomaterials Based on Magnetite and Mesoporous Silica on the Selective Detection of Zinc Ion in Live Cell Imaging

Functionalized magnetite nanoparticles (FMNPs) and functionalized mesoporous silica nanoparticles (FMSNs) were synthesized by the conjugation of magnetite and mesoporous silica with the small and fluorogenic benzothiazole ligand, that is, 2(2-hydroxyphenyl)benzothiazole (hpbtz). The synthesized fluorescent nanoparticles were characterized by FTIR, XRD, XRF, ¹³C CP MAS NMR, BET, and TEM. The photophysical behavior of FMNPs and FMSNs in ethanol was studied using fluorescence spectroscopy. The modification of magnetite and silica scaffolds with the highly fluorescent benzothiazole ligand enabled the nanoparticles to be used as selective and sensitive optical probes for zinc ion detection. Moreover, the presence of hpbtz in FMNPs and FMSNs induced efficient cell viability and zinc ion uptake, with desirable signaling in the normal human kidney epithelial (Hek293) cell line. The significant viability of FMNPs and FMSNs (80% and 92%, respectively) indicates a potential applicability of these nanoparticles as in vitro imaging agents. The calculated limit of detections (LODs) were found to be 2.53 × 10⁻⁶ and 2.55 × 10⁻⁶ M for Fe₃O₄-H@hpbtz and MSN-Et₃N-IPTMS-hpbtz-f1, respectively. FMSNs showed more pronounced zinc signaling relative to FMNPs, as a result of the more efficient penetration into the cells.

Luminescent magnetic nanoparticles encapsulated in MOFs for highly selective and sensitive detection of ClO-/SCN- and anti-counterfeiting

It is well-known that ClO- and SCN- can cause adverse effects on the environment and organisms; therefore, development of new strategies for detecting ClO- and SCN-, especially in water, are highly desirable. Here, we present luminous Eu(iii) complex-functionalized Fe3O4 nanoparticles encapsulated into zeolitic imidazolate framework materials (nano-ZIF-8) and successfully employ this nano-MOF as a fluorescence probe for selective and sensitive detection of ClO- and SCN-. The introduction of ClO- into nano-ZIF-8 solution induced a significant decrease in the characteristic fluorescence emission of Eu3+ at 613 nm. However, strong fluorescence emission was again observed when SCN- was successively injected into the prepared nano-ZIF-8-ClO-. Thus, a novel fluorescence system for simultaneous detection of free ClO- and SCN- was established. On the basis of the superior adsorption performance of nano-MOF materials, free residual ClO- and SCN- in water was rapidly, sensitively and selectively detected with a detection limit of 0.133 nM and 0.204 nM, respectively. Moreover, nano-ZIF-8 was successfully used for monitoring the concentration levels of ClO- and SCN- in specimens of tap water and Yellow River water. Furthermore, the reversibility and regeneration of nano-ZIF-8 in sensing ClO- and SCN- is advantageous for applications of nano-ZIF-8 in solid-state sensing and anti-counterfeiting. As far as we know, this is the first time that nano-MOFs have been used as a selective fluorescence probe for ClO-/SCN- detection and anti-counterfeiting.