Regioselective Synthesis of 5-Monostyryl and 2-Tetracyanobutadiene BODIPY Dyes

Perspectives on push-pull chromophores derived from click-type [2 + 2] cycloaddition-retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

Various push-pull chromophores can be synthesized in a single and atom-economical step through [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) reactions involving diverse electron-rich alkynes and electron-deficient alkenes. In this review, a comprehensive investigation of the recent and noteworthy advancements in the research on push-pull chromophores prepared via the [2 + 2] CA-RE reaction is conducted. In particular, an overview of the physicochemical properties of the family of these compounds that have been investigated is provided to clarify their potential for future applications.

Two-Photon Absorption Response of Functionalized BODIPY Dyes in Near-IR Region by Tuning Conjugation Length and Meso-Substituents

BODIPY dyes substituted by phenol or -COOMe units at the meso-position (C8) with and without a distyryl group including a methoxy moiety at the -C3 and -C5 positions of the BODIPY have been synthesized to analyze the photophysical properties. To clarify the ground-state interaction, absorption and emission features were investigated in the THF environment. Extending the π-conjugation with the methoxy moiety at -C3 and -C5 positions of BODIPY leads to a spectral shifting of the absorption maxima toward red by 120 nm. In addition, attaching the -COOMe unit at the meso-position of the BODIPY structure increases nonradiative molecular relaxation as compared to compounds possessing phenol substituents at the same position. We have investigated the effect of phenol and a -COOMe group and π-extended conjugation length with a methoxy moiety on the properties of two-photon absorption (TPA) and electron transfer dynamics by performing open-aperture (OA) Z-scan and femtosecond transient absorption spectroscopy measurements, respectively. The synthesized BODIPY compounds with the distyryl group including the methoxy unit show TPA character due to the longer conjugation length and therefore intramolecular charge transfer ability. Based on the OA Z-scan experiments upon photoexcitation with 800 nm pulsed laser light, TPA cross-section values were obtained as 74 and 81 GM for the compounds possessing phenol and -COOMe units at the meso-position of BODIPY treated by distyryl group with methoxy moieties, respectively. Additionally, optical and electronic properties were calculated theoretically by using the DFT method.

Tetracyanobutadiene Bridged Push-Pull Chromophores: Development of New Generation Optoelectronic Materials

This review describes the design strategies used for the synthesis of various tetracyanobutadiene bridged donor-acceptor molecular architectures by a click type [2+2] cycloaddition-retroelectrocyclization (CA-RE) reaction sequence. The photophysical and electrochemical properties of the tetracyanobutadiene bridged molecular architectures based on various moieties including diketopyrrolopyrrole, isoindigo, benzothiadiazole, pyrene, pyrazabole, truxene, boron dipyrromethene (BODIPY), phenothiazine, triphenylamine, thiazole and bisthiazole are summarized. Further, we discuss some important applications of the tetracyanobutadiene bridged derivatives in dye sensitized solar cells, bulk heterojunction solar cells and photothermal cancer therapy.

3-Alkynylindoles as Building Blocks for the Synthesis of Electronically Tunable Indole-Based Push-Pull Chromophores

In this study, two different classes of push–pull chromophores were synthesized in modest to excellent yields by formal [2+2] cycloaddition-retroelectrocyclization (CA-RE) reactions. N-Methyl indole was introduced as a new donor group to activate alkynes in the CA-RE transformations. Depending on the side groups’ size and donor/acceptor characteristics, N-methyl indole-containing compounds exhibited λ_max values ranging between 378 and 658 nm. The optoelectronic properties of the reported D–A-type structures were studied by UV/vis spectroscopy and computational studies. The complete regioselectivity observed in the products was elaborated by one-dimensional (1D) and two-dimensional (2D) NMR studies, and the electron donor strength order of N-alkyl indole and triazene donor groups was also established. The intramolecular charge-transfer characteristics of the target push–pull chromophores were investigated by frontier orbital depictions, electrostatic potential maps, and time-dependent density functional theory calculations. Overall, the computational and experimental results match each other. Integrating a new donor group, N-alkyl indole, into the substrates used in formal [2+2] cycloaddition-retroelectrocyclizations has significant potential to overcome the limited donor-substituted substrate scope problem of CA-RE reactions.

Expanding the Chemical Space of Tetracyanobuta-1,3-diene (TCBD) through a Cyano-Diels-Alder Reaction: Synthesis, Structure, and Physicochemical Properties of an Anthryl-fused-TCBD Derivative

Tetracyanobuta-1,3-diene (TCBD) is a powerful and versatile electron-acceptor moiety widely used for the preparation of electroactive conjugates. While many reports addressing its electron-accepting capability have appeared in the literature, significantly scarcer are those dealing with its chemical modification, a relevant topic which allows to broaden the chemical space of this interesting functional unit. Here, we report on the first example of a high-yielding cyano-Diels-Alder (CDA) reaction between TCBD, that is, where a nitrile group acts as a dienophile, and an anthryl moiety, that is, acting as a diene. The resulting anthryl-fused-TCBD derivative, which structure was unambiguously identified by X-ray diffraction, shows high thermal stability, remarkable electron-accepting capability, and interesting electronic ground- and excited-state features, as characterized by a thorough theoretical, electrochemical, and photophysical investigation. Moreover, a detailed kinetic analysis of the intramolecular CDA reaction transforming the anthryl-TCBD-based reactant into the anthryl-fused-TCBD product was carried out at different temperatures.

Supramolecular architectures sustained by delocalised C–I⋯π(arene) interactions in molecular crystals and the propensity of their formation

A survey of delocalised C–I⋯π(chelate ring) interactions is presented.

Modulation of supramolecular self-assembly of BODIPY tectons via halogen bonding

In this study, the efficiency of halogen bonding strategies to control over the supramolecular assemblies of boron dipyrromethene (BODIPY) (B-1, B-2, and B-3) derivatives was explored.

Triphenylamine/Tetracyanobutadiene-Based π-Conjugated Push-Pull Molecules End-Capped with Arene Platforms: Synthesis, Photophysics, and Photovoltaic Response

π-Conjugated push-pull molecules based on triphenylamine and 1,1,4,4-tetracyanobuta-1,3-diene (TCBD) have been functionalized with different terminal arene units. In solution, these highly TCBD-twisted systems showed a strong internal charge transfer band in the visible spectrum and no detectable photoluminescence (PL). Photophysical and theoretical investigations revealed very short singlet excited state deactivation time of ≈10 ps resulting from significant conformational changes of the TCBD-arene moiety upon photoexcitation, opening a pathway for non-radiative decay. The PL was recovered in vacuum-processed films or when the molecules were dispersed in a PMMA matrix leading to a significant increase of the excited state deactivation time. As shown by cyclic voltammetry, these molecules can act as electron donors compared to C₆₀ . Hence, vacuum-processed planar heterojunction organic solar cells were fabricated leading to a maximum power conversion efficiency of ca. 1.9 % which decreases with the increase of the arene size.

Novel Alkyl(aryl)-Substituted 2,2-Difluoro-6-(trichloromethyl)-2H-1,3,2-oxazaborinin-3-ium-2-uides: Synthesis, Antimicrobial Activity, and CT-DNA Binding Evaluations

The synthesis, antimicrobial activity evaluations, biomolecule-binding properties (DNA), and absorption and emission properties of a new series of (Z)-1,1,1-trichloro-4-alkyl(aryl)amino-4-arylbut-3-en-2-ones (4, 5) and 2,2-difluoro-3-alkyl(aryl)amino-4-aryl-6-(trichloromethyl)-2H-1,3,2-oxazaborinin-3-ium-2-uides (6, 7) in which 3(4)-alkyl(aryl) = H, Me, iso-propyl, n-butyl, C6H5, 4-CH3C6H4, 4-CH3OC6H4, 4-NO2C6H4, 4-FC6H4, 4-BrC6H4, 2-naphthyl, is reported. A series of β-enaminoketones (4, 5) is synthesized from the O,N-exchange reaction of some amines (3) with (Z)-1,1,1-trichloro-4-methoxy-4-aryl-but-3-en-2-ones (1, 2) at 61-90% yields. Subsequently, reactions of the resulting β-enaminoketones with an appropriate source of boron (BF3.OEt2) gave the corresponding oxazaborinine derivatives (6, 7) at 50-91% yields. UV-Vis and emission properties of biomolecule-binding properties for the DNA of these new BF2-β-enamino containing CCl3 units were also evaluated. Some compounds from the present series also exhibited potent antimicrobial effects on various pathogenic microorganisms at concentrations below those that showed cytotoxic effects. Compounds 4d, 4e, 6e, and 6f showed the best results and are very significant against P. zopfii, which causes diseases in humans and animals.

Donor-acceptor-acceptor (D-A-A) type 1,8-naphthalimides as non-fullerene small molecule acceptors for bulk heterojunction solar cells

Donor-acceptor-acceptor (D-A-A) type 1,8-naphthalimide based small molecules SM1 and SM2 functionalized with tetracyanobutadiene (TCBD) and dicyanoquino-dimethane (DCNQ) modules, showing strong absorption in the visible and near-infrared (NIR) region are reported. TCBD and DCNQ linked SM1 and SM2 exhibit multi-redox waves. The electrochemical and optical HOMO-LUMO gaps show similar trends. These SMs exhibit a broad absorption profile which is complementary to the D-A copolymer P donor and also possess an appropriate lowest unoccupied molecular orbital (LUMO) to serve as an acceptor with P with a LUMO level of -3.33 eV. The organic solar cells based on P:SM1 and P:SM2 exhibit a PCE of 4.94% and 6.11%, respectively. The higher value of the PCE for the SM2 based organic solar cells has been attributed to the broader absorption profile, more balanced charge transport and lower photon energy loss. The values of Voc of the organic solar cells for the SM1 acceptor (1.06 V and 1.02 V without and with solvent additive) are the highest values reported for devices based on non-fullerene acceptors to the best of our knowledge. The energy loss (Eloss) of 0.56 eV and 0.48 eV for SM1 and SM2 based devices, respectively is one of the smallest reported for BHJ organic solar cells.

Investigating the properties of PODIPYs (phosphorus-dipyrromethene) with ab initio tools

What are the differences between BODIPYs and PODIPYs?

Tetracyanobutadiene functionalized ferrocenyl BODIPY dyes

Tetracyanobutadiene (TCBD) derivatives of ferrocenyl BODIPYs 2a-2c were designed and synthesized by [2 + 2] cycloaddition-retroelectrocyclization reaction of tetracyanoethylene (TCNE) with meso alkynylated ferrocenyl BODIPYs. The TCBD substituted ferrocenyl BODIPYs were designed in such a way that the distance between the ferrocenyl unit and the TCBD remains constant, whereas the distance between the BODIPY and the TCBD unit varies. The TCBD and BODIPY units were connected directly through a single bond (in 2a), through a phenylacetylene linkage (in 2b) and through a vinyl linkage (in 2c). The photonic and electrochemical properties of ferrocenyl BODIPYs were strongly perturbed by the incorporation of TCBD. The TCBD derivatives 2a-2c show red shifted absorption compared to their precursors 1a-1c. The single crystal structures of TCBD functionalized ferrocenyl BODIPYs 2a and 2c reveal extensive intermolecular hydrogen bonding but lack π-π stacking interactions.

Halogenated boron-dipyrromethenes: synthesis, properties and applications

Synthesis and properties of halogenated boron-dipyrromethenes and their applications in developing various BODIPY systems are described in this review.

Design, synthesis and photophysical studies of dipyrromethene-based materials: insights into their applications in organic photovoltaic devices

This review article presents the most recent developments in the use of materials based on dipyrromethene (DPM) and azadipyrromethenes (ADPM) for organic photovoltaic (OPV) applications. These chromophores and their corresponding BF2-chelated derivatives BODIPY and aza-BODIPY, respectively, are well known for fluorescence-based applications but are relatively new in the field of photovoltaic research. This review examines the variety of relevant designs, synthetic methodologies and photophysical studies related to materials that incorporate these porphyrinoid-related dyes in their architecture. The main idea is to inspire readers to explore new avenues in the design of next generation small-molecule and bulk-heterojunction solar cell (BHJSC) OPV materials based on DPM chromophores. The main concepts are briefly explained, along with the main challenges that are to be resolved in order to take full advantage of solar energy.

Cyclometalated Ir(iii) complexes with styryl-BODIPY ligands showing near IR absorption/emission: preparation, study of photophysical properties and application as photodynamic/luminescence imaging materials

Heteroleptic C^N cyclometalated iridium(iii) complexes showing strong NIR absorption were prepared.

Synthesis of conjugated BODIPYs via the Wittig reaction

A Wittig reaction was employed to synthesize conjugated BODIPYs in high yields by treating formylated BODIPYs with alkyl/aryl ylides under simple room temperature conditions. Treatment of 3,5-diformyl BODIPYs or α-formyl 3-pyrrolyl BODIPY with different alkyl/aryl ylides in CH2Cl2 at room temperature for 2 h followed by straightforward column chromatographic purification on silica afforded conjugated BODIPYs in ~65-90% yields. This is an alternate method to Knoevenagel and Heck reactions which have been used to synthesize such conjugated BODIPYs. The method works very efficiently, and we prepared 12 substituted BODIPYs including cholesterol-substituted BODIPYs to demonstrate the versatility of the reaction. The spectral, electrochemical, and fluorescence properties of these conjugated BODIPYs are also described.

6,6-Dicyanopentafulvenes: electronic structure and regioselectivity in [2 + 2] cycloaddition-retroelectrocyclization reactions

We present an investigation of the electronic properties and reactivity behavior of electron-accepting 6,6-dicyanopentafulvenes (DCFs). The electron paramagnetic resonance (EPR) spectra of the radical anion of a tetrakis(silylalkynyl) DCF, generated by Na metal reduction, show delocalization of both the charge and unpaired electron to the nitrogens of the cyano moieties and also, notably, to the silicon atoms of the four alkynyl moieties. By contrast, in the radical anion of the previously reported tetraphenyl DCF, coupling to the four phenyl rings is strongly attenuated. The data provide physical evidence for the different conjugation between the DCF core and the substituents in both systems. We also report the preparation of new fulvene-based push-pull chromophores via formal [2 + 2] cycloaddition-retroelectrocyclization reaction of DCFs with electron-rich alkynes. Alkynylated and phenylated DCFs show opposite regioselectivity of the cycloaddition, which can be explained by the differences in electronic communication between substituents and the DCF core as revealed in the EPR spectra of the radical anions.