Mild and rapid hydroxylation of aryl/heteroaryl boronic acids and boronate esters with N-oxides

Borylation via iridium catalysed C-H activation: a new concise route to duocarmycin derivatives

The synthesis of the ethyl ester analogue of the ultrapotent antitumour antibiotic seco-duocarmycin SA has been achieved in eleven linear steps from commercially available starting materials. The DSA alkylation subunit can be made in ten linear steps from the same precursor. The route involves C-H activation at the equivalent of the C7 position on indole leading to a borylated intermediate 9 that is stable enough for peptide coupling reactions but can be easily converted to the free hydroxyl analogue.

Ecofriendly Protocol for ipso-Bromination of Arylboronic Acids

We report a novel and environmentally friendly method for the ipso-bromination of arylboronic acids by exploiting the oxone/KBr system. We discovered that CuBr can catalyze the reaction and increase the yield from 63 to 97%. We believe that CuBr might catalyze the in situ generation of HOBr from oxone/KBr. The mild reaction condition permits tolerance of a diverse array of functional groups with exclusive regio- and chemoselectivity and allows low-cost large-scale reaction without explosion risk.

Aerobic Oxidative Hydroxylation of Arylboronic Acids under Visible-Light Irradiation without Metal Catalysts or Additives

Phenols are versatile synthetic intermediates and key structural motifs in many natural products and biologically active compounds. We herein report a visible-light-induced aerobic oxidative hydroxylation of arylboronic acids/pinacol esters using air as oxidant and without using any catalysts and base, etc., additives, providing a green entry to a variety of phenols in a highly efficient and concise fashion. This novel reaction is enabled by photoactivation of an electron donor-acceptor complex, in which THF serves as both the solvent and electron donor. DFT studies indicated that the oxidation process involves a concerted hydrogen abstraction transfer from THF and dehydroxylation of boronic acid undergoing spin crossover from triplet to singlet to produce an active peroxoboronic acid intermidiate. Salient merits of this chemistry include broad substrate scope and excellent functional group tolerance, gram-scale synthesis, and versatile late-stage functionalizations as well as the use of air, visible light, and catalyst- and additive-free conditions. This strategy introduces a novel photoreaction mode with the aid of a solvent, offering a succinct and environmentally sustainable route for synthesizing phenols. The strong practicability and highly efficient access to modifying complex biorelevant molecules bode well for the potential applications of this chemistry in pharmaceutical chemistry.

Metal-Free Oxidative Formation of Aryl Esters by Catalytic Coupling of Acyl and Sulfonyl Chlorides with Arylboronic Acids

A practical and efficient synthesis of aryl esters was developed through metal-free oxidation. This reaction employs stable and readily available acyl or sulfonyl chlorides and arylboronic acids as the starting materials and proceeds under mild reaction conditions without additional precious metal catalysts. This new strategy exhibits broad substrate tolerance and operational simplicity and gives diverse aryl esters in moderate to high yields.

Enamine N-oxides: Design, Synthesis, and Function in Bioorthogonal Reactions

Enamine N-oxides act as a chemical linchpin bridging two bioorthogonal associative and dissociative reactions. This article describes the design of enamine N-oxides; their synthesis through the retro-Cope elimination reaction; the use of solvent, hyperconjugation, strain, and rehybridization effects to achieve bioorthogonal reactivity; and their rapid reductive cleavage with diboron reagents. The coordinated assembly and disassembly of the enamine N-oxide motif constitutes a powerful chemical operation that enables the attachment and detachment of small molecules from biomacromolecules in a biological setting.

Bioorthogonal Bond Cleavage Chemistry for On-demand Prodrug Activation: Opportunities and Challenges

Time- and space-resolved drug delivery is highly demanded for cancer treatment, which, however, can barely be achieved with a traditional prodrug strategy. In recent years, the prodrug strategy based on a bioorthogonal bond cleavage chemistry has emerged with the advantages of high temporospatial resolution over drug activation and homogeneous activation irrespective of individual heterogeneity. In the past five years, tremendous progress has been witnessed in this field with one such bioorthogonal prodrug entering Phase II clinical trials. This Perspective aims to highlight these new advances (2019-2023) and critically discuss their pros and cons. In addition, the remaining challenges and potential strategic directions for future progress will also be included.

Reactive oxygen signaling molecule inducible regulation of CRISPR-Cas9 gene editing

We report development of a controllable gene editing tool that boronated gRNA, simply generated in situ, could regulate binding of gRNA molecules with either Cas9 endonuclease or target genes, thus serving as a modulator that can control CRISPR-Cas9 gene editing. Subsequent treatment with H2O2 facilitates the restoration of gene editing ability of the boronated gRNA to the level of using untreated gRNA. This is one of the few cases using small molecule to regulate CRISPR-Cas9 gene editing, which is a complement to the light approach, displaying great application potential. We develop a controllable gene editing tools based on the CRISPR-Cas9 gene editing system. This tool can be regulated by oxidative small molecule, i.e., H2O2. Compared with the light method, the application scope of our CRISPR-Cas9 systems have been widened with the small-molecule-triggered approaches, preventing the potential damage of cells or organism caused by UV light. In addition, the gain-of-function tools are expanding the gene code expansion for mechanistic studies of target enzymes since it provides a positive route to evaluate the activity of a given enzyme in dynamic and inversible regulation of targeting cellular processes.

Linker-Assisted CdS-TiO2 Nanohybrids as Reusable Visible Light Photocatalysts for the Oxidative Hydroxylation of Arylboronic Acids

A variety of phenols have been obtained in aqueous media with moderate to excellent chemical yields (≤100%) by using arylboronic acids and esters as substrates, a robust CdS-TiO₂ nanohybrid as a heterogeneous photocatalyst, visible light irradiation (467 nm), and an O₂-saturated atmosphere. The nanohybrid was prepared through a linker-assisted methodology that uses mercapto alkanoic acids as the organic linkers. The nanohybrid showed improved photocatalytic activity in the hydroxylation of substituted arylboronic acids and phenyl boronic esters compared with that of pristine CdS quantum dots. The nanohybrid can be reused in up to five photocatalytic cycles with ∼90% of its outstanding activity preserved.

Surface Nanoarchitectonics of Boron Nitride Nanosheets for Highly Efficient and Sustainable ipso-Hydroxylation of Arylboronic Acids

One of the important industrial processes commonly employed in the pharmaceutical, explosive, and plastic manufacturing industries is ipso-hydroxylation of arylboronic acids. In this work, a straightforward, metal-free methodology for the synthesis of phenols from arylboronic acids has been demonstrated using hydroxyl functionalized boron nitride (BN-OH) nanosheets. The functionalized hydroxyl groups on the BN nanosheets act as the active sites for the hydroxylation reaction to take place. The detailed optimization of reaction parameters was done in order to attain high catalytic efficiency, and the reactions were conducted in water, which eliminates the use of toxic solvents. The as-synthesized catalysts exhibited excellent recyclability and reusability in addition to high product yields and good turnover numbers. The green metrics parameters were also evaluated for the model reaction to examine the sustainable nature of the developed protocol. The use of BN-OH catalysts for the ipso-hydroxylation reactions under base-free and metal-free conditions using environmentally benign solvents is utmost desired for industrial processes and can pave a way toward sustainable organic catalysis.

Template-Less and Surfactant-Less Synthesis of CeO2 Nanostructures for Catalytic Application in Ipso-hydroxylation of Aryl Boronic Acids and the aza-Michael Reaction

Due to its excellent physicochemical properties, CeO₂ has found great importance as an electrochemical and in electronics, photocatalysis, sensing, and heterogeneous catalysis. Herein, we report the surfactant-less and template-less synthesis of CeO₂ nanostructures by the hydrothermal method. The synthesized CeO₂ nanostructures have been characterized in detail by electron microscopy, spectroscopy, diffractometry, and other analytical methods. The XRD studies revealed the formation of pure crystalline CeO_2, possessing a cubic fluorite structure with an average crystallite size of 15.6 to 16.4 nm. Electron microscopy studies reveal the formation of cube-shaped CeO₂ nanostructures with sizes below 25 nm. The cube-shaped CeO₂ nanostructures exhibited a higher BET surface area compared to their bulk counterparts. The XPS analysis has confirmed the existence of Ce in the mixed oxidation states of +3 and +4, while O is present as O^2- in the sample. The as-synthesized CeO₂ nanostructures exhibit excellent catalytic activity in both the ipso-hydroxylation of aryl boronic acids and the aza-Michael reaction. The analysis of the used catalyst has confirmed its stability under the reported reaction conditions. The catalysts retain their catalytic activity up to the fifth run in both types of reactions, which is economically beneficial for industrial application.

H-bond cooperativity: polarisation effects on secondary amides

Formation of a H-bond with an amide carbonyl oxygen atom increases the strength of subsequent H-bonds formed by the amide NH, due to polarisation of the bond. The magnitude of this effect has been quantified by measuring association constants for the formation of 1 : 1 complexes of 2-hydroxylbenzamides with tri-n-butyl phosphine oxide. In 2-hydroxybenzamides, there is an intramolecular H-bond between the phenol OH group and the carbonyl oxygen atom. Comparison of the association constants measured for compounds with and without the 2-hydroxy group allows direct quantification of the effect of the intramolecular H-bond on the H-bond donor properties of the amide NH group. Substituents were used to modulate the strength of the intramolecular and intermolecular H-bonds. The presence of an intramolecular H-bond increases the strength of the intermolecular H-bond by more than one order of magnitude in n-octane solution. The increase in the H-bond donor parameter used to describe the amide NH group is directly proportional to the H-bond donor parameter of the phenol OH group that makes the intramolecular H-bond. These polarisation effects will lead to substantial cooperativity in complex systems that feature networks of non-covalent interactions, and the measurements described here provide a quantitative basis for understanding such phenomena.

Formation of an intramolecular phenol-amide H-bond leads to a dramatic increase in the H-bond donor strength of the amide NH group. Polarisation of the amide group is directly proportional to the polarity of the phenol H-bond donor.

Copper-Catalyzed Direct Syntheses of Phenoxypyrimidines from Chloropyrimidines and Arylboronic Acids: A Cascade Avenue and Unconventional Substrate Pairs

This letter describes the first synthetic methodology for phenoxypyrimidines that avoids the direct use of phenols or their salts. In contrast to the general trend of delivering Suzuki-Miyaura cross-coupling products in reactions between aryl or alky halides and arylboronic acids, the substrate pairs used herein (chloropyrimidines and arylboronic acids) led to C-O bond formation under the reaction conditions. In total, 25 phenoxypyrimidines were successfully synthesized using the described protocol, 6 of which had a structural resemblance to etravirine.

Bioorthogonal Click and Release: A General, Rapid, Chemically Revertible Bioconjugation Strategy Employing Enamine N-oxides

A chemically revertible bioconjugation strategy featuring a new bioorthogonal dissociative reaction employing enamine N-oxides is described. The reaction is rapid, complete, directional, traceless, and displays a broad substrate scope. Reaction rates for cleavage of fluorophores from proteins are on the order of 82 M-1s-1, and the reaction is relatively insensitive to common aqueous buffers and pHs between 4 and 10. Diboron reagents with bidentate and tridentate ligands also effectively reduce the enamine N-oxide to induce dissociation and compound release. This reaction can be paired with the corresponding bioorthogonal hydroamination reaction to afford an integrated system of bioorthogonal click and release via an enamine N-oxide linchpin with a minimal footprint. The tandem associative and dissociative reactions are useful for the transient attachment of proteins and small molecules with access to a discrete, isolable intermediate. We demonstrate the effectiveness of this revertible transformation on cells using chemically cleavable antibody-drug conjugates.

A redox-enabled strategy for intramolecular hydroamination

Metal- or acid-catalyzed intramolecular hydroamination and Cope-type intramolecular hydroamination, a distinct concerted approach using hydroxylamines, typically suffer from significant synthetic limitations. Herein we report a process for intramolecular hydroamination that uses a redox-enabled strategy relying on efficient in situ generation of hydroxylamines by oxidation, followed by Cope-type hydroamination, then reduction of the resulting pyrrolidine N-oxide. The steps are performed sequentially in a single pot, no catalyst is required, the conditions are mild, the process is highly functional group tolerant, and no chromatography is generally required for isolation. A robustness screen and a gram-scale example further support the practicality of this approach.

Bare Magnetite-Promoted Oxidative Hydroxylation of Arylboronic Acids and Subsequent Conversion into Phenolic Compounds

The simple combination of readily available, recoverable, and recyclable magnetite (Fe3O4) nanoparticles and an environmentally friendly oxidant (H2O2) induced the effective functional group transformation of arylboronic acids into their corresponding phenols under mild conditions. Moreover, subsequent treatment of the reaction intermediate with appropriate electrophiles was accomplished in a one-pot system, leading to the formation of halophenols and phenolic derivatives.

Endogenous hydrogen peroxide can efficiently regulate CRISPR-Cas9 based gene editing

We report controllable gene editing tools for the CRISPR-Cas9 system via genetic code expansion triggered by oxidative small molecule H2O2.

Radical-anion coupling through reagent design: hydroxylation of aryl halides

The design and development of an oxime-based hydroxylation reagent, which can chemoselectively convert aryl halides (X = F, Cl, Br, I) into phenols under operationally simple, transition-metal-free conditions is described. Key to the success of this approach was the identification of a reducing oxime anion which can interact and couple with open-shell aryl radicals. Experimental and computational studies support the proposed radical-nucleophilic substitution chain mechanism.

TYLENOL® and ASPIRIN® as green promoters for ipso-hydroxylation of arylboronic acids

:

We explored the most expedient pathway for phenolic compound preparation using a combination of arylboronic acids, a green oxidant (H2O2) and a catalytic amount of readily available medicinal materials (TYLENOL® and ASPIRIN®). The ayrlboronic acids were successfully transformed into the corresponding phenols in high yields under metal- and base-free aqueous aerobic conditions. We demonstrated that enhanced availability and sustainability are some advantages associated with the use of medicinal supports.

The graphite-catalyzed ipso-functionalization of arylboronic acids in an aqueous medium: metal-free access to phenols, anilines, nitroarenes, and haloarenes

An efficient, metal-free, and sustainable strategy has been described for the ipso-functionalization of phenylboronic acids using air as an oxidant in an aqueous medium. A range of carbon materials has been tested as carbocatalysts. To our surprise, graphite was found to be the best catalyst in terms of the turnover frequency. A broad range of valuable substituted aromatic compounds, i.e., phenols, anilines, nitroarenes, and haloarenes, has been prepared via the functionalization of the C-B bond into C-N, C-O, and many other C-X bonds. The vital role of the aromatic π-conjugation system of graphite in this protocol has been established and was observed via numerous analytic techniques. The heterogeneous nature of graphite facilitates the high recyclability of the carbocatalyst. This effective and easy system provides a multipurpose approach for the production of valuable substituted aromatic compounds without using any metals, ligands, bases, or harsh oxidants.

A scalable and green one-minute synthesis of substituted phenols

A mild, green and highly efficient protocol was developed for the synthesis of substituted phenols via ipso-hydroxylation of arylboronic acids in ethanol. The method utilizes the combination of aqueous hydrogen peroxide as the oxidant and H₂O₂/HBr as the reagent under unprecedentedly simple and convenient conditions. A wide range of arylboronic acids were smoothly transformed into substituted phenols in very good to excellent yields without chromatographic purification. The reaction is scalable up to at least 5 grams at room temperature with one-minute reaction time and can be combined in a one-pot sequence with bromination and Pd-catalyzed cross-coupling to generate more diverse, highly substituted phenols.

Oxidative Hydroxylation of Aryl Boronic Acid Catalyzed by Co-porphyrin Complexes via Blue-Light Irradiation

Oxidative reactions often require unstable and environmentally harmful oxidants; therefore, the investigation of safer alternatives is urgent. Here, the hydroxylation of aryl boronic acid in the presence of Co-complexes is demonstrated. Tetrakis(4-carboxyphenyl) Co(II)-porphyrin was combined with biodegradable polymers such as chitosan catalyzed hydroxylation of phenyl boronic acids to form phenol derivatives under blue-light irradiation. This catalytic system can be used as an eco-friendly oxidation process that does not release oxidizing agents into the atmosphere.

Synthesis of Phenols via Metal-Free Hydroxylation of Aryl Boronic Acids with Aqueous TBHP

An alternate procedure for oxidative hydroxylation of aryl boronic acids with aqueous TBHP to access phenols is described. The protocol tolerated various functional groups substituted with aromatic rings. The reaction was performed in water and free from transition metal oxidants.

Oxidation of Alkynyl Boronates to Carboxylic Acids, Esters, and Amides

A general efficient protocol was developed for the synthesis of carboxylic acids, esters, and amides through oxidation of alkynyl boronates, generated directly from terminal alkynes. This protocol represents the first example of C(sp)-B bond oxidation. This approach displays a broad substrate scope, including aryl and alkyl alkynes, and exhibits excellent functional group tolerance. Water, primary and secondary alcohols, and amines are suitable nucleophiles for this transformation. Notably, amino acids and peptides can be used as nucleophiles, providing an efficient method for the synthesis and modification of peptides. The practicability of this methodology was further highlighted by the preparation of pharmaceutical molecules.

Aerobic photooxidative hydroxylation of boronic acids catalyzed by anthraquinone-containing polymeric photosensitizer

We report herein the synthesis of a polymeric photosensitizer and its application in aerobic photooxidative hydroxylation of boronic acids.