Iodobenzene Catalyzed C–H Amination of N-Substituted Amidines Using m-Chloroperbenzoic Acid

Enroute sustainability: metal free C-H bond functionalisation

The term "C-H functionalisation" incorporates C-H activation followed by its transformation. In a single line, this can be defined as the conversion of carbon-hydrogen bonds into carbon-carbon or carbon-heteroatom bonds. The catalytic functionalisation of C-H bonds using transition metals has emerged as an atom-economical technique to engender new bonds without activated precursors which can be considered as a major drawback while attempting large-scale synthesis. Replacing the transition-metal-catalysed approach with a metal-free strategy significantly offers an alternative route that is not only inexpensive but also environmentally benign to functionalize C-H bonds. Recently metal free synthetic approaches have been flourishing to functionalize C-H bonds, motivated by the search for greener, cost-effective, and non-toxic catalysts. In this review, we will highlight the comprehensive and up-to-date discussion on recent examples of ground-breaking research on green and sustainable metal-free C-H bond functionalisation.

Hypervalent iodine(iii) promoted C–H/C–H amination/annulation tandem reactions: synthesis of benzimidazoles from simple anilines and aldehydes

A novel hypervalent iodine mediated cascade transformation of anilines and aldehydes to benzimidazoles was developed.

Hexamethyldisilazane-Mediated Amidination of Sulfonamides and Amines with Formamides

Hexamethyldisilazane was reacted with formamides to generate N,N-disubstituent formimidamide, after which a reaction with sulfonamides was induced to form sulfonylformamidines. This protocol can be applied for arylformamidine formation in which anilines are used as substrates under optimized conditions. The advantages of this method are high efficiency, structural diversity in products with good yields, and applicability in large-scale operations.

Tandem Reduction, Ammonolysis, Condensation, and Deamination Reaction for Synthesis of Benzothiadiazines and 1-(Phenylsulfonyl)-1H-benzimidazoles

A novel route for a SnCl₂-promoted tandem reduction, ammonolysis, condensation, and deamination reaction which uses nitrile and 2-nitro-N-phenylbenzenesulfonamide/N-(2-nitrophenyl)benzenesulfonamide to synthesize derivatives of benzothiadiazine/1-(phenylsulfonyl)-1H-benzimidazole has been developed. The method features convenient operation and good functional group tolerance. In addition, it employs unsensitive and inexpensive SnCl₂/i-PrOH as the reaction reagent and provides a direct approach for the synthesis of pharmaceutically important targets.

HFIP in Organic Synthesis

1,1,1,3,3,3-Hexafluoroisopropanol (HFIP) is a polar, strongly hydrogen bond-donating solvent that has found numerous uses in organic synthesis due to its ability to stabilize ionic species, transfer protons, and engage in a range of other intermolecular interactions. The use of this solvent has exponentially increased in the past decade and has become a solvent of choice in some areas, such as C-H functionalization chemistry. In this review, following a brief history of HFIP in organic synthesis and an overview of its physical properties, literature examples of organic reactions using HFIP as a solvent or an additive are presented, emphasizing the effect of solvent of each reaction.

Strategies to Generate Nitrogen-centered Radicals That May Rely on Photoredox Catalysis: Development in Reaction Methodology and Applications in Organic Synthesis

For more than 70 years, nitrogen-centered radicals have been recognized as potent synthetic intermediates. This review is a survey designed for use by chemists engaged in target-oriented synthesis. This review summarizes the recent paradigm shift in access to and application of N-centered radicals enabled by visible-light photocatalysis. This shift broadens and streamlines approaches to many small molecules because visible-light photocatalysis conditions are mild. Explicit attention is paid to innovative advances in N-X bonds as radical precursors, where X = Cl, N, S, O, and H. For clarity, key mechanistic data is noted, where available. Synthetic applications and limitations are summarized to illuminate the tremendous utility of photocatalytically generated nitrogen-centered radicals.

Iodine-mediated oxythiolation of o-vinylanilides with disulfides for the synthesis of benzoxazines

An efficient iodine-mediated oxythiolation of o-vinylanilides with disulfides was developed. By virtue of this method, a series of thio-tethered benzoxazine derivatives were synthesized in good to excellent yields. The reaction features high yields, is metal-free, and has a wide substrate scope.

An efficient iodine-mediated oxythiolation of o-vinylanilides with disulfides was developed. The reaction features high yields, is metal-free, and has a wide substrate scope.

Enantioselective C2-Allylation of Benzimidazoles Using 1,3-Diene Pronucleophiles

Although substituted benzimidazoles are common substructures in bioactive small molecules, synthetic methods for their derivatization are still limited. Previously, several enantioselective allylation reactions of benzimidazoles were reported that functionalize the nucleophilic nitrogen atom. Herein we describe a reversal of this inherent selectivity toward N-allylation by using electrophilic N-OPiv benzimidazoles with readily available 1,3-dienes as nucleophile precursors. This CuH-catalyzed approach utilizes mild reaction conditions, exhibits broad functional-group compatibility, and exclusively forms the C2-allylated product with excellent stereoselectivity.

Metal-Free Synthesis of Benzimidazoles via Oxidative Cyclization of d-Glucose with o-Phenylenediamines in Water

d-Glucose has been identified as an efficient C1 synthon in the synthesis of benzimidazoles from o-phenylenediamines via an oxidative cyclization strategy. Isotopic studies with ¹³C₆-d-glucose and D₂O unambiguously confirmed the source of methine. The notable features of this method include the following: broad functional group tolerance, a biorenewable methine source, excellent reaction yields, a short reaction time, water as an environmentally benign solvent, and the synthesis of vitamin B₁₂ component on the gram scale.

Hypervalent iodine promoted ortho diversification: 2-aryl benzimidazole, quinazoline and imidazopyridine as directing templates

The mild and efficient palladium-catalyzed ortho C(sp²)-H diversification of (NH)-free 2-substituted benzimidazole, quinazoline, and imidazopyridine is reported using hypervalent iodine as the key reagent. Acetoxy, aryl, iodide and nitro functional groups were introduced on the same substrate by simply shifting the reaction conditions in the presence of inorganic additives (Cs₂CO₃, I₂, NaNO₂) and the hypervalent iodine reagent (diacetoxyiodo)benzene (PIDA) under aerobic conditions. The combination of NaNO₂ with PIDA was successfully employed in Pd-catalyzed C-H bond nitration to achieve a library of nitrated 1,3 N-heterocycles. This versatile ortho C(sp²)-H activation strategy features operational simplicity, short reaction times, and ample substrate possibilities, it requires no ligands or silver salts as additives, and it shows good tolerance of oxidation prone functional groups.

Transforming Oxadiazolines through Nitrene Intermediates by Energy Transfer Catalysis: Access to Sulfoximines and Benzimidazoles

Subtle differences in reaction conditions facilitated unprecedented photocatalytic reactions of oxadiazolines by energy transfer catalysis. A set of compounds, sulfoximines and benzimidazoles, were ingeniously prepared from oxadiazolines via nitrene intermediates by photocatalytic N-O/C-N bond cleavages. The synthesis of sulfoximines was realized through intermolecular N-S bond formation between nitrene intermediates and sulfoxides, whereas benzimidazoles were obtained via intramolecular aromatic substitution of the nitrene to the tethered aryl substituent.

Oxidative Cyclization Approach to Benzimidazole Libraries

An efficient approach to the parallel synthesis of benzimidazoles from anilines is described. Library approaches to vary the N1 and C2 vectors of benzimidazoles are well established; however, C4-C7 variation has traditionally relied on 1,2-dianiline building blocks, providing limited chemical space coverage. We have developed an amidine formation/oxidative cyclization sequence that enables anilines as a diversity set for benzimidazole C4-C7 SAR generation in parallel format. The amidine annulation was achieved using PIDA or Cu-mediated oxidation to access both N-H and N-alkyl benzimidazoles. This library protocol has now been utilized for analog production in four medicinal chemistry projects. Additionally, the synthesis of aza-benzimidazoles from aminopyridines was achieved via an analogous sequence.

Formation of Amidinyl Radicals via Visible-Light-Promoted Reduction of N-Phenyl Amidoxime Esters and Application to the Synthesis of 2-Substituted Benzimidazoles

We have developed a new method for the synthesis of 2-substituted benzimidazoles via amidinyl radicals generated by visible-light-promoted reduction of N-phenyl amidoxime esters in the presence of an iridium photocatalyst. This is the first report of the use of N-phenyl amidoxime esters as amidinyl radical precursors, and the first use of substituted benzene rings as amidinyl radical acceptors. This method widens the application range of substrates and overcomes the shortcomings of the traditional methods for the synthesis of 2-substituted benzimidazoles, which requires harsh reaction conditions, involves difficult-to-prepare substituted o-phenylenediamine substrates, and produces acidic waste.

Developments towards synthesis of N-heterocycles from amidines via C–N/C–C bond formation

This review focuses on the synthesis of N-heterocycles using amidines as starting materials, with an emphasis on the mechanisms of these reactions via C–N/C–C bond formation.

Intramolecular dehydrogenative C–S bond coupling of thioamides to form 1,3-benzothiazines under metal-free conditions

A new protocol for the synthesis of 1,3-benzothiazines was developed through direct intramolecular dehydrogenative C–S bond coupling.

Palladium-Catalyzed Synthesis of Amidines via tert-Butyl isocyanide Insertion

Para-substituted iodobenzenes were reacted with tert-butyl isocyanide and piperidine as nucleophiles in the presence of palladium-diphosphine catalysts. Both single and double insertion of the isocyanide was observed and the corresponding amidines and ketimine-amidines were obtained in yields of practical interest. With the increase of the tert-butyl isocyanide/iodobenzene ratio, 100% chemoselectivity toward the ketimine-amidine was achieved. The formation of the products was rationalized on the basis of a catalytic cycle analogous to that of the aminocarbonylation reactions. Clear connection was found between the activity and the electronic structure of the proposed catalyst Pd(diphosphine) by computational studies, as the more negative partial charge on palladium resulted in higher conversion. Among five isocyanide substrates, only tert-butyl isocyanide was proved to be active.

Intramolecular alkene hydroamination and degradation of amidines: divergent behavior of rare earth metal amidinate intermediates

The methods for catalytic intramolecular alkene hydroamination and degradation of amidines have been established. Furthermore, a tandem reconstruction/cyclization of amidines has also been developed.

Mild Reductive Functionalization of Amides into N-Sulfonylformamidines

The development of a protocol for the reductive functionalization of amides into N‐sulfonylformamidines is reported. The one‐pot procedure is based on a mild catalytic reduction of tertiary amides into the corresponding enamines by the use of Mo(CO)₆ (molybdenum hexacarbonyl) and TMDS (1,1,3,3‐tetramethyldisiloxane). The formed enamines were allowed to react with sulfonyl azides to give the target compounds in moderate to good yields.