Rigid π-Extended Triptycenes via a Hexaketone Precursor

A Novel Homoconjugated Propellane Triimide: Synthesis, Structural Analyses, and Gas Separation

Rigid three-dimensional (3D) polycyclic propellanes have garnered interest due to their unique conformational spaces, which display great potential use in selectivity, separation and as models to study through-space electronic interactions. Herein we report the synthesis of a novel rigid propellane, trinaphtho[3.3.3]propellane triimide, which comprises three imide groups embedded on a trinaphtho[3.3.3]propellane. This propellane triimide exhibits large bathochromic shift, amplified molar absorptivity, enhanced fluorescence, and lower reduction potential when compared to the subunits. Computational and experimental studies reveal that the effective through-space π-orbitals interacting (homoconjugation) occurs between the subunits. Single-crystal XRD analysis reveals that the propellane triimide has a highly quasi-D3h symmetric skeleton and readily crystallizes into different superstructures by changing alkyl chains at the imide positions. In particular, the porous 3D superstructure with S-shaped channels is promising for taking up ethane (C2H6) with very good selectivity over ethylene (C2H4), which can purify C2H4 from C2H6/C2H4 in a single separation step. This work showcases a new class of rare 3D polycyclic propellane with intriguing electronic and supramolecular properties.

Piezofluorochromism in Hierarchical Porous π-stacked Supermolecular Spring Frameworks from Aromatic Chiral Cages

Piezochromic materials that exhibit pressure-dependent luminescence variations are attracting interest with wide potential applications in mechanical sensors, anticounterfeiting and storage devices. Crystalline porous materials (CPMs) have been widely studied in piezochromism for highly tunable luminescence. Nevertheless, reversible and high-contrast emission response with a wide pressure range is still challenging. Herein, the first example of hierarchical porous cage-based πOF (Cage-πOF-1) with spring structure was synthesized by using aromatic chiral cages as building blocks. Its elastic properties evaluated based on the bulk modulus (9.5 GPa) is softer than most reported CPMs and the collapse point (20.0 GPa) significantly exceeds ever reported CPMs. As smart materials, Cage-πOF-1 displays linear pressure-dependent emission and achieves a high-contrast emission difference up to 154 nm. Pressure-responsive limit is up to 16 GPa, outperforming the CPMs reported so far. Dedicated experiments and density functional theory (DFT) calculations illustrate that π-π interactions-dominated controllable structural shrinkage and porous-spring-structure-mediated elasticity is responsible for the outstanding piezofluorochromism.

A Strategy to Design Substituted Tetraamino-Phenazine Dyes and Access to an NIR-Absorbing Benzoquinonediimine-Fused Quinoxaline

The straightforward access to N- or C-substituted dinitro-tetraamino-phenazines (P1-P5) is enabled in oxidative conditions via formation of two intermolecular C-N bonds from accessible 5-nitrobenzene-1,2,4-triamine precursors. The photophysical studies revealed green absorbing and orange-red emitting dyes, with enhanced fluorescence in the solid state. Further reduction of the nitro functions led to the isolation of a benzoquinonediimine-fused quinoxaline (P6), which undergoes diprotonation to form a dicationic coupled trimethine dye absorbing beyond 800 nm.

2D Organic Materials: Status and Challenges

In the past few decades, 2D layer materials have gradually become a central focus in materials science owing to their uniquely layered structural qualities and good optoelectronic properties. However, in the development of 2D materials, several disadvantages, such as limited types of materials and the inability to synthesize large-scale materials, severely confine their application. Therefore, further exploration of new materials and preparation methods is necessary to meet technological developmental needs. Organic molecular materials have the advantage of being customizable. Therefore, if organic molecular and 2D materials are combined, the resulting 2D organic materials would have excellent optical and electrical properties. In addition, through this combination, the free design and large-scale synthesis of 2D materials can be realized in principle. Furthermore, 2D organic materials exhibit excellent properties and unique functionalities along with great potential for developing sensors, biomedicine, and electronics. In this review, 2D organic materials are divided into five categories. The preparation methods and material properties of each class of materials are also described in detail. Notably, to comprehensively understand each material's advantages, the latest research applications for each material are presented in detail and summarized. Finally, the future development and application prospects of 2D organic materials are briefly discussed.

Acene-Extended Triptycenes: Synthesis, Characterization, and Singlet Exciton Fission Properties

Three acene-extended triptycenes, TIPS-Antrip, TIPS-Tetrip, and TIPS-Pentrip, which contain TIPS-ethynyl functionalized anthracene, tetracene, and pentacene as subunits, respectively, are synthesized and characterized. It is found that the optoelectronic properties and crystal packing motifs could be modulated by changing the subunits. A preliminary exploration of the excited-state behavior of these molecules indicates that TIPS-Tetrip and TIPS-Pentrip exhibit intramolecular singlet fission (iSF).

Access to fused π-extended acridone derivatives through a regioselective oxidative demethylation

The oxidative demethylation of ortho-dimethoxyacridone with ceric ammonium nitrate (CAN) regioselectively furnished an ortho-quinone leaving a methoxyl group unreacted, which further condensed with aromatic ortho-diamines to afford angularly fused π-extended acridone derivatives. Crystallographic analysis reveals the distinct manner of molecular packing in the crystals according to the dimension of π-extension. The benzene at the turning point possesses a shorter outer bond and a longer inner bond, which affects molecular conjugation and results in weakened aromaticity.

Synthesis and Optoelectronic Properties of a Quinoxalino-Phenanthrophenazine (QPP) Extended Tribenzotriquinacene (TBTQ)

A six‐step synthesis towards a tribenzotriquinacene (TBTQ) bearing three quinoxalinophenanthrophenazine (QPP) units is presented. The optoelectronic properties are investigated and the effect of the three‐dimensional arrangement of the individual QPP planes is examined using optical spectroscopy, electrochemical analysis and quantum‐chemical calculations.

Triptycene End-Capping as Strategy in Materials Chemistry to Control Crystal Packing and Increase Solubility

In materials chemistry of polycyclic aromatic compounds (PACs) the kind of aggregation and the spatial arrangement of the π-planes are of utmost importance, e. g. for charge transport properties. Unfortunately, controlling these during crystallization is not trivial. In the past decade, we have introduced one-fold triptycene end-capping of quinoxalinophenanthrophenazines (QPPs) and other related structures to overcome this problem. When two instead of one triptycene end-caps are introduced, packing is largely suppressed, making typical PACs or pigments soluble in common organic solvents - which is another important property for such compounds to be processable from solution. In this account an overview of our research on using triptycene end-capping as dual strategy is given.

Triptycene End-Capped Indigo Derivatives - Turning Insoluble Pigments to Soluble Dyes

The synthesis of a highly soluble triptycene end-capped indigo and its bay annulated derivative is reported. Both compounds have been studied by absorption and emission spectroscopy cyclic voltammetry, as well as theoretical calculations and compared to the parent indigo and bay annulated indigo. Besides a large improvement of solubility in organic solvents by the factor of approx. 70(!) the compounds also show a pronounced tendency to form crystals. Both properties, making these compounds promising electron acceptors for organic electronics.

Triptycene End-Capped Benzothienobenzothiophene and Naphthothienobenzothiophene

Previously it was demonstrated that triptycene end-capping can be used as a crystal engineering strategy to direct the packing of quinoxalinophenanthrophenazines (QPPs) towards cofacially stacked π dimers with large molecular overlap resulting in high charge transfer integrals. Remarkably, this packing motif was formed under different crystallization conditions and with a variety of derivatives bearing additional functional groups or aromatic substituents. Benzothienobenzothiophene (BTBT) and its derivatives are known as some of the best performing compounds for organic field-effect transistors. Here, the triptycene end-capping concept is introduced to this class of compounds and polymorphic crystal structures are investigated to evaluate the potential of triptycene end-caps as synthons for crystal engineering.

Regiocontrolled dimerization of asymmetric diazaheptacene derivatives toward X-shaped porous semiconductors

Conformationally rigid X-shaped PAHs are attracting interest due to their self-assembly into unique networks and as models to study through-space exciton and charge delocalization in one single molecule. We report here the synthesis of X-shaped PAHs by dimerization of diazaheptacene diimides. The diimide groups are employed to effectively direct the self-assembly into antiparallel dimer aggregates, which assist the compounds to undergo a regiocontrolled [4 + 4] dimerization, leading to an X-shaped conformation bearing electron-poor and -rich subunits. The resulting PAHs are found to pack in 2D layers with large open channels and infinite π⋯π arrays. Furthermore, these highly crystalline porous materials serve as electron-transporting materials in OFETs due to the long-range π-stacked arrays in the layers. This work presents a potentially generalizable strategy, which may provide a unique class of porous semiconductors for organic devices, taking advantage of their open channels.

The synthesis of conformationally rigid X-shaped PAHs by regiocontrolled cyclodimerization of diazaheptacene diimides is presented. The resulting porous materials exhibit enhanced semiconducting behaviors with large open channels.

Di- and Tetracyano-Substituted Pyrene-Fused Pyrazaacenes: Aggregation in the Solid State

Five di- and tetracyano-substituted pyrene-fused pyrazaacenes were synthesized and studied as potential electron acceptors in the solid state. Single crystals of all compounds were grown and the crystal packing studied by DFT calculations (transfer integrals and reorganization energies) to get insight into possible use for semiconducting charge transport.

Microporous Triptycene-Based Affinity Materials on Quartz Crystal Microbalances for Tracing of Illicit Compounds

Triptycene-based organic molecules of intrinsic microporosity (OMIMs) with extended functionalized π-surfaces are excellent materials for gas sorption and separation. In this study, the affinities of triptycene-based OMIM affinity materials on 195 MHz high-fundamental-frequency quartz crystal microbalances (HFF-QCMs) for hazardous and illicit compounds such as piperonal and (-)-norephedrine were determined. Both new and existing porous triptycene-based affinity materials were investigated, resulting in very high sensitivities and selectivities that could be applied for sensing purposes. Remarkable results were found for safrole - a starting material for illicit compounds such as ecstasy. A systematic approach highlights the effects of different size of π-surfaces of these affinity materials, allowing a classification of the properties that might be optimal for the design of future OMIM-based affinity materials.

Stable Radical Cations of N,N'-Diarylated Dihydrodiazapentacenes

A series of quinoidal N,N'-diaryldiaza-N,N'-dihydropentacenes (Quino) was prepared in a two-step reaction, starting from quinacridone. Oxidation of Quino furnishes stable radical cations, isoelectronic to the radical anions of the azaacenes, whereas the dicationic species are isoelectronic to neutral azapentacenes. The spectroscopic properties of the diaryldiazapentacenes and their oxidized mono- and dications are equivalent to that of the dianion of tetraazapentacene (TAP), its radical anion and the neutral TAP.

Triptycene End-Capped Quinoxalinophenanthrophenazines (QPPs): Influence of Substituents and Conditions on Aggregation in the Solid State

Triptycene end-capped quinoxalinophenanthrophenazine reveals a coplanar arrangement with a high overlap of the π planes. Four structurally related model compounds bearing electron-withdrawing or -donating groups were synthesized, and their optoelectronic properties were characterized by using cyclovoltammetry, absorption- and emission spectroscopy as well as theoretical calculations. The directional robustness of the triptycene end-capping of these compounds was tested by using single-crystal X-ray diffraction. The impact of solvents and crystallization conditions has also been investigated. In total, 17 single-crystal structures were obtained. Each structure was evaluated for its potential charge-transfer capability taking into account the overall molecular packing, solvent enclathration and the structural overlap of the π planes of adjacent molecules. For this purpose, charge-transfer integrals were also calculated for every π-stacked dimer.

Mono- and Dianion of a Bis(benzobuta)tetraazapentacene Derivative

A bis(benzobuta)tetraazapentacene derivative was reduced to its radical anion and its dianion, using potassium [18]crown-6 anthracenide in THF. Both reduced species were characterized by UV/Vis spectroscopy of the isolated species and by spectroelectrochemistry. Two distinct single-crystal structures of the dianion and an EPR spectrum of the radical anion were obtained. Contrary to other azaacenes, the lowest energy absorption in the UV/Vis spectrum of the dianion is redshifted in comparison to that of the neutral compound.

Three-Dimensional Pyrene-Fused N-Heteroacenes

Four three-dimensional (3D) pyrene-fused N-heteroacenes (P1-P4) are designed and synthesized. From P1 to P4, their lengths are extended in an iterative way, where the thiadiazole unit can be reduced to diamine and the obtained diamines can be further condensed with the diketones with a thiadiazole unit. Compared to their two-dimensional counterparts, the solubility of these 3D pyrene-fused N-heteroacenes is improved by this 3D covalent linkage with two-dimensional units. The diameters of P1-P4 are 3.66, 6.06, 8.48 and 10.88 nm, respectively, and these 3D molecules are characterized by 1H, 13C and 2D NMR, MS, UV-vis, PL and CV spectra. Our strategy shows a promising way to large 3D pyrene-fused N-heteroacenes.

A Three-Dimensional Dynamic Supramolecular "Sticky Fingers" Organic Framework

Engineering high-recognition host-guest materials is a burgeoning area in basic and applied research. The challenge of exploring novel porous materials with advanced functionalities prompted us to develop dynamic crystalline structures promoted by soft interactions. The first example of a pure molecular dynamic crystalline framework is demonstrated, which is held together by means of weak "sticky fingers" van der Waals interactions. The presented organic-fullerene-based material exhibits a non-porous dynamic crystalline structure capable of undergoing single-crystal-to-single-crystal reactions. Exposure to hydrazine vapors induces structural and chemical changes that manifest as toposelective hydrogenation of alternating rings on the surface of the [60]fullerene. Control experiments confirm that the same reaction does not occur when performed in solution. Easy-to-detect changes in the macroscopic properties of the sample suggest utility as molecular sensors or energy-storage materials.

Dissecting Porosity in Molecular Crystals: Influence of Geometry, Hydrogen Bonding, and [π···π] Stacking on the Solid-State Packing of Fluorinated Aromatics

Porous molecular crystals are an emerging class of porous materials that is unique in being built from discrete molecules rather than being polymeric in nature. In this study, we examined the effects of molecular structure of the precursors on the formation of porous solid-state structures with a series of 16 rigid aromatics. The majority of these precursors possess pyrazole groups capable of hydrogen bonding, as well as electron-rich aromatics and electron-poor tetrafluorobenzene rings. These precursors were prepared using a combination of Pd- and Cu-catalyzed cross-couplings, careful manipulations of protecting groups on the nitrogen atoms, and solvothermal syntheses. Our study varied the geometry and dimensions of precursors, as well as the presence of groups capable of hydrogen bonding and [π···π] stacking. Thirteen derivatives were crystallographically characterized, and four of them were found to be porous with surface areas between 283 and 1821 m² g^-1. Common to these four porous structures were (a) rigid trigonal geometry, (b) [π···π] stacking of electron-poor tetrafluorobenzenes with electron-rich pyrazoles or tetrazoles, and

Synthesis and characterization of two different azarubrenes

Synthesis and structural characterization of novel di- and tetraazarubrenes with increased electron affinity are described.

Supramolecular frameworks based on [60]fullerene hexakisadducts

[60]Fullerene hexakisadducts possessing 12 carboxylic acid side chains form crystalline hydrogen-bonding frameworks in the solid state. Depending on the length of the linker between the reactive sites and the malonate units, the distance of the [60]fullerene nodes and thereby the spacing of the frameworks can be controlled and for the most elongated derivative, continuous channels are obtained within the structure. Stability, structural integrity and porosity of the material were investigated by powder X-ray diffraction, thermogravimetry and sorption measurements.

Planar versus triptycenylene end-capped aroyleneimidazoles as electron acceptors in organic photovoltaics

The effect of triptycenylene end-groups on the optoelectronic properties of aroyleneimidazoles and their performance as acceptors in bulk heterojunction photovoltaic devices are described.

Heterocyclic Nanographenes and Other Polycyclic Heteroaromatic Compounds: Synthetic Routes, Properties, and Applications

Two-dimensionally extended, polycyclic heteroaromatic molecules (heterocyclic nanographenes) are a highly versatile class of organic materials, applicable as functional chromophores and organic semiconductors. In this Review, we discuss the rich chemistry of large heteroaromatics, focusing on their synthesis, electronic properties, and applications in materials science. This Review summarizes the historical development and current state of the art in this rapidly expanding field of research, which has become one of the key exploration areas of modern heterocyclic chemistry.

π-Extended rigid triptycene-trisaroylenimidazoles as electron acceptors

Two soluble isomeric acceptor molecules based on a triptycene core, which is connected to three aroylenimidazole units are described. Due to the inherent threefold axis, the molecules are soluble and thus could be fully photophysically characterized in solution and film. Additionally, the preliminary results of these acceptors in organic photovoltaic devices with two different donor materials are reported.

The Synthesis of Organic Molecules of Intrinsic Microporosity Designed to Frustrate Efficient Molecular Packing

Efficient reactions between fluorine-functionalised biphenyl and terphenyl derivatives with catechol-functionalised terminal groups provide a route to large, discrete organic molecules of intrinsic microporosity (OMIMs) that provide porous solids solely by their inefficient packing. By altering the size and substituent bulk of the terminal groups, a number of soluble compounds with apparent BET surface areas in excess of 600 m(2)  g(-1) are produced. The efficiency of OMIM structural units for generating microporosity is in the order: propellane>triptycene>hexaphenylbenzene>spirobifluorene>naphthyl=phenyl. The introduction of bulky hydrocarbon substituents significantly enhances microporosity by further reducing packing efficiency. These results are consistent with findings from previously reported packing simulation studies. The introduction of methyl groups at the bridgehead position of triptycene units reduces intrinsic microporosity. This is presumably due to their internal position within the OMIM structure so that they occupy space, but unlike peripheral substituents they do not contribute to the generation of free volume by inefficient packing.