Spiropyran-conjugated thermoresponsive copolymer as a colorimetric thermometer with linear and reversible color change

Recent advances in shape memory scaffolds and regenerative outcomes

The advent of tissue engineering (TE) technologies has revolutionized human medicine over the last few decades. Despite splendid advances in the fabricating and development of different substrates for regenerative purposes, non-responsive static composites have been used to heal injured tissues. After being transplanted into the target sites, grafts will lose their original features, leading to a reduction in regenerative potential. Along with these statements, the use of shape memory polymers (SMPs), smart substrates with unique physicochemical properties, has been extended in different disciplines of regenerative medicine in recent years. These substrates are intelligent and they can easily change physicogeometry features such as stiffness, strain size, shape, etc. in response to external stimuli. It has been proposed that SMPs can easily acquire their original properties after deformation, even in the presence or absence of certain stimuli. It has been indicated that the application of distinct synthesis protocols is required to fabricate dynamically switchable surfaces with prominent cell-to-substrate interaction, resulting in better regulation of cell function, dynamic growth, and reparative mechanisms. Here, we aimed to scrutinize the prominent regenerative properties of SMPs in the TE and regenerative medicine fields. Whether and how SMPs can orchestrate certain cell behavior, with reconfigurable features and adaptability were discussed in detail.

A spiropyran-based polymer with a stimulus response to water temperature and water content

Temperature-responsive spiropyran-functionalized polymers usually require a thermo-sensitive polymer. However, their temperature response range is limited by the lower critical solution temperature (LCST) of the thermo-sensitive polymer, which does not exceed 37 °C. In this work, a hydrophilic polymer (PHEA-SP) sheet was prepared by photo-initiated copolymerization of hydroxyethyl acrylate (HEA) and a spiropyran crosslinking agent (SP). In water, swelling and hydrogen bonding can increase the ring-opening isomerization probability of spiropyran at the PHEA-SP crosslinking point, thus amplifying the discoloration of spiropyran induced by temperature change. PHEA-SP is very responsive to water temperature in the range of 25-55 °C, due to the amplification of spiropyranoid discoloration described above. This method avoids the dependence of the temperature responsive spiropyran-functionalized polymer on a thermo-sensitive polymer and additional UV light, while increasing the upper limit of the water temperature response to 55 °C. In addition, PHEA-SP also shows responsivity to water content in ethanol solution from 0.3% to 100%.

Light-driven self-assembly of spiropyran-functionalized covalent organic framework

Controlling the number of molecular switches and their relative positioning within porous materials is critical to their functionality and properties. The proximity of many molecular switches to one another can hinder or completely suppress their response. Herein, a synthetic strategy involving mixed linkers is used to control the distribution of spiropyran-functionalized linkers in a covalent organic framework (COF). The COF contains a spiropyran in each pore which exhibits excellent reversible photoswitching behavior to its merocyanine form in the solid state in response to UV/Vis light. The spiro-COF possesses an urchin-shaped morphology and exhibits a morphological transition to 2D nanosheets and vesicles in solution upon UV light irradiation. The merocyanine-equipped COFs are extremely stable and possess a more ordered structure with enhanced photoluminescence. This approach to modulating structural isomerization in the solid state is used to develop inkless printing media, while the photomediated polarity change is used for water harvesting applications.

The State of the Art of Natural Polymer Functionalized Fe3O4 Magnetic Nanoparticle Composites for Drug Delivery Applications: A Review

Natural polymers have received a great deal of interest for their potential use in the encapsulation and transportation of pharmaceuticals and other bioactive compounds for disease treatment. In this perspective, the drug delivery systems (DDS) constructed by representative natural polymers from animals (gelatin and hyaluronic acid), plants (pectin and starch), and microbes (Xanthan gum and Dextran) are provided. In order to enhance the efficiency of polymers in DDS by delivering the medicine to the right location, reducing the medication's adverse effects on neighboring organs or tissues, and controlling the medication's release to stop the cycle of over- and under-dosing, the incorporation of Fe3O4 magnetic nanoparticles with the polymers has engaged the most consideration due to their rare characteristics, such as easy separation, superparamagnetism, and high surface area. This review is designed to report the recent progress of natural polymeric Fe3O4 magnetic nanoparticles in drug delivery applications, based on different polymers' origins.

Mechanochromophore-linked Polymeric Materials with Visible Color Changes

Mechanical force as a type of stimuli for smart materials has obtained much attention in the past decade. Color-changing materials in response to mechanical stimuli have shown great potential in the applications such as sensors and displays. Mechanochromophore-linked polymeric materials, which are a growing sub-class of these materials, are discussed in detail in this review. Two main types of mechanochromophores which exhibit visible color change, summarized herein, involve either isomerization or radical generation mechanisms. This review focuses on their synthesis and incorporation into polymer matrices, the type of mechanical force used, factors affecting the mechanochromic properties, and their applications. This article is protected by copyright. All rights reserved.

Rhodamine-Installed Polynorbornenes: Molecular Design, Structure, and Stimuli-Responsive Properties

The synthesis of a number of tailored architectures of rhodamine dye-norbornene conjugate monomers and corresponding homopolymers derived from them is described. The impact of the monomer architecture on the mechanochromic, photochromic, and thermochromic properties of rhodamine-modified polynorbornenes is reported. Color changes were caused by the reversible interconversion between the "open" and "closed" spirolactam form of the covalently attached dye. Monomers were synthesized in two principle architectures that varied on: (1) the number of polymerizable norbornene groups tethered to a bifunctional rhodamine dye; (2) the presence of flexible methylene spacers between the dye and the polymerizable norbornene groups. Introduction of norbornene groups on each of the two hydroxy groups of a bifunctional rhodamine resulted in a cross-linked polymer that exhibited better mechanochromic, photochromic, and thermochromic properties compared to the corresponding polymer without cross-links, derived from the derivatization of bifunctional rhodamine with only one norbornene. The introduction of flexible methylene spacers between the two polymerizable norbornenes and the dye molecule resulted in a polymeric framework with rapidly reversible color-changing properties upon mechanical or photostimulation. The ideal monomer molecular structure, whereby (1) attaching norbornene on both sides of the rhodamine dye and (2) methylene spacers between the dye and norbornenes on both sides afforded the nonpareil polymer structure that was capable of thermoreversible mechanochromic and photochromic features, and irreversible thermochromic features. These new materials may find utility as multi-stimuli-responsive soft materials.

Spatiotemporal patterning of photoresponsive DNA-based hydrogels to tune local cell responses

Understanding the spatiotemporal effects of surface topographies and modulated stiffness and anisotropic stresses of hydrogels on cell growth remains a biophysical challenge. Here we introduce the photolithographic patterning or two-photon laser scanning confocal microscopy patterning of a series of o-nitrobenzylphosphate ester nucleic acid-based polyacrylamide hydrogel films generating periodically-spaced circular patterned domains surrounded by continuous hydrogel matrices. The patterning processes lead to guided modulated stiffness differences between the patterned domains and the surrounding hydrogel matrices, and to the selective functionalization of sub-regions of the films with nucleic acid anchoring tethers. HeLa cells are deposited on the circularly-shaped domains functionalized with the MUC-1 aptamers. Initiation of the hybridization chain reaction by nucleic acid tethers associated with the continuous hydrogel matrix results in stress-induced ordered orthogonal shape-changes on the patterned domains, leading to ordered shapes of cell aggregates bound to the patterns.

Polymeric nano-carriers for on-demand delivery of genes via specific responses to stimuli

Polymeric nano-carriers have been developed as a most capable and feasible technology platform for gene therapy. As vehicles, polymeric nano-carriers are obliged to possess high gene loading capability, low immunogenicity, safety, and the ability to transfer various genetic materials into specific sites of target cells to express therapeutic proteins or block a process of gene expression. To this end, various types of polymeric nano-carriers have been prepared to release genes in response to stimuli such as pH, redox, enzymes, light and temperature. These stimulus-responsive nano-carriers exhibit high gene transfection efficiency and low cytotoxicity. In particular, dual- and multi-stimulus-responsive polymeric nano-carriers can respond to a combination of signals. Markedly, these combined responses take place either simultaneously or in a sequential manner. These dual-stimulus-responsive polymeric nano-carriers can control gene delivery with high gene transfection both in vitro and in vivo. In this review paper, we highlight the recent exciting developments in stimulus-responsive polymeric nano-carriers for gene delivery applications.

Preparation and analysis of photochromic behavior of carboxymethyl chitin derivatives containing spiropyran moieties

1ʹ-(2-Acryloxyethyl)-3,3ʹ-dimethyl-6-nitrospiro[2 H-1-benzopyran-2,2ʹ-indoline] (SPA) was synthesized and grafted onto a water-soluble carboxymethyl chitin (CMCH) macromolecule to prepare a photochromic copolymer (CMCH-g-SPA). The structure of CMCH-g-SPA was characterized by Fourier-transform infrared (FT-IR) spectroscopy, thermogravimetric (TG) analysis, X-ray diffraction (XRD) analysis, water-solubility evaluation, and UV-vis spectroscopy. XRD patterns of CMCH-g-SPA revealed that grafting copolymerization disrupts the CMCH semicrystalline structure, thus improving water solubility. UV-vis spectroscopy results supported the negative photochromic behavior of the merocyanine (MC) form of CMCH-g-SPA (CMCH-g-MCA) present in a water solution of the target copolymer. In addition to high solvent polarity, the intermolecular and intramolecular electrostatic attraction between the indolenine cation and the COO⁻ anion were found to be influencing factors, which stabilize these MC form of spiropyran groups grafted onto CMCH. In a water solution, visible light bleaching was completed over a short period (8 minutes) under artificial visible light irradiation and the thermal coloration reaction, whose rate constant at 25 °C was 4.64 × 10⁻⁴ s⁻¹, which fit the first-order reaction equation. After ten photochromic cycles in water solution, the relative absorption intensity of CMCH-g-MCA decreased by 7.92%.

Preparation and Photochromic Performance of Homogeneous Phase Nitrocellulose Membrane Grafting Spirooxazine Moieties

The synthesis of 1,3,3-trimethyl-9′-acryloxyspiro[indoline-2,3′(3H)naphtho[2,1-b][l,4]-oxazine] (AISO) was carried out by catalytic esterification of 1,3,3-trimethyl-9′-hydroxyspiro-[indoline-2,3′(3H)naphtho[2,1-b][l,4]oxazine] (SO–OH) and acrylic acid in the presence of 1,3-dicyclohexylcarbodiimide (DCC) and N-dimethylaminopyridine (DMAP). Then, the synthesis of the target copolymer (NC-g-AISO) was was carried out by benzoyl peroxide (BPO)-induced graft copolymerization of the AISO monomer onto nitrocellulose (NC) in a homogeneous methyl isobutyl ketone medium. The structure of NC-g-AISO was characterized by Fourier transform infrared (IR) spectroscopy, 13C Nuclear Magnetic Resonance (NMR) spectra and thermogravimetric (TG) analysis. The photochromic properties of NC-g-AISO were investigated by examining UV–Vis spectra in ethyl acetate solution and solid membrane. Compared with the AISO monomer in ethyl acetate solution, the thermal color decay stability of the colored form of NC-g-AISO in ethyl acetate solution and in solid membrane improved significantly. The thermal color decay reaction rate constants in ethyl acetate solution and membrane at 25 °C were 1.77 × 10–2 and 1.36 × 10–3 s–1, respectively, fitted using the first-order reaction equation. After ten photochromic cycles, the relative absorption intensity of the colored form of NC-g-AISO decreased by 0.85%, indicating that the NC-g-AISO membrane has good reversible photochromic behavior.

Synthesis of a 5-Carboxy Indole-Based Spiropyran Fluorophore: Thermal, Electrochemical, Photophysical and Bovine Serum Albumin Interaction Investigations

In this study, we synthesized a spiropyran containing an electron-withdrawing carboxyl group in good yield by condensation of an aromatic aldehyde with enamine indole. The spiropyran absorbed at the ultraviolet region with a maximum at approximately 300 nm, demonstrating slight solvatochromism (~3 nm). A fluorescent emission around 360 nm was observed with a higher solvatochromic effect (~12 nm), indicating higher electronic delocalization in the excited state. The photoreversibility of the open and closed forms of spiropyran excited at 300 nm and 365 nm was not observed, indicating that the absence of the nitro group plays a fundamental role in this equilibrium. Theoretical calculations were also applied for better understanding the photophysics of these compounds. Electrochemical characterization revealed the values of the HOMO and LUMO energy levels at −1.89 eV (electron affinity) and −5.61 eV (ionization potential), respectively. Thermogravimetric analysis showed excellent thermal stability of the spiropyran, with 5% weight loss at approximately 250 °C. Finally, the photophysical features were used to explore the interaction of spiropyran with bovine serum albumin in a phosphate buffer solution, where a significant suppression mechanism was observed.

The light-controlling of temperature-responsivity in stimuli-responsive polymers

Light-controlling of phase separation in temperature-responsive polymer solutions by using light-responsive materials for reversible controlling physical and chemical properties of the media with an out-of-system stimulus with tunable intensity.

Chemical and photochemical DNA "gears" reversibly control stiffness, shape-memory, self-healing and controlled release properties of polyacrylamide hydrogels

A new class of stimuli-responsive DNA-based polyacrylamide hydrogels is described. They consist of glucosamine-boronate ester-crosslinked polyacrylamide chains being cooperatively bridged by stimuli-responsive nucleic acids. The triggered closure and dissociation of the stimuli-responsive units lead to switchable stiffness properties of the hydrogel. One hydrogel includes glucosamine-boronate esters and K⁺-ion-stabilized G-quadruplex units as cooperative crosslinkers. The hydrogel bridged by the two motifs reveals high stiffness, whereas the separation of the G-quadruplex bridges by 18-crown-6-ether yields a low stiffness hydrogel. By cyclic treatment of the hydrogel with K⁺-ions and 18-crown-6-ether, it is reversibly cycled between high and low stiffness states. The second system involves a photo-responsive hydrogel that reveals light-induced switchable stiffness functions. The polyacrylamide chains are cooperatively crosslinked by glucosamine-boronate esters and duplex nucleic acid bridges stabilized by trans-azobenzene intercalator units. The resulting hydrogel reveals high stiffness. Photoisomerization of the trans-azobenzene units to the cis-azobenzene states results in the separation of the duplex nucleic acid bridges and the formation of a low stiffness hydrogel. The control over the stiffness properties of the hydrogel matrices by means of K⁺-ions/crown ether or photoisomerizable trans-azobenzene/cis-azobenzene units is used to develop shape-memory, self-healing, and controlled drug-release hydrogel materials.

Dual thermo- and light-responsive coumarin-based copolymers with programmable cloud points

This article deals with the design of a new class of dual-responsive coumarin-based copolymers, sensitive to temperature and light (UV and near infrared).

A switchable electrochromism and electrochemiluminescence bifunctional sensor based on the electro-triggered isomerization of spiropyran/layered double hydroxides

A bifunctional ultrathin film electrode was fabricated based on layered double hydroxides and spiropyran, which exhibited electrochromism and electrochemiluminescence sensing behavior toward temperature and Zn²⁺ ions.

Fabrication of color changeable CO2 sensitive nanofibers

A CO₂ sensor was fabricated by attaching CO₂-sensitive spiropyran groups onto versatile photo-crosslinked poly(glycidyl methacrylate) (PGMA) precursor nanofibers via a nucleophilic ring-opening reaction.

Light-controlled switching of the self-assembly of ill-defined amphiphilic SP-PAMAM

Spiropyrans-decorated polyamidoamine (SP-P3) with ill-defined structures was successfully prepared for the construction of photocontrolled supramolecular macrorods.

Spiropyran-modified gold nanoparticles: reversible size control of aggregates by UV and visible light irradiations

UV or visible light irradiation of gold nanoparticles (AuNPs) modified with a thiol-terminated spiropyran dye promotes reversible aggregation or dispersion of AuNPs. This is facilitated by the electrostatic repulsion/attraction between the AuNPs controlled by the ring-opening/closing photoisomerization of the surface dyes. This photochemical method successfully produces aggregates of AuNPs with tunable sizes (20-340 nm) and narrow size distributions (standard deviation <34%) in a reversible manner. In addition, the formed aggregates, even when left in the dark condition, scarcely change their sizes because the stacking interaction between the ring-opened forms of surface dyes suppresses thermal reverse isomerization and maintains the attractive force between the AuNPs.

Smart functional polymers – a new route towards creating a sustainable environment

Smart functional polymers have gained a huge amount of interest in recent times due to their innumerable applications in areas including sensors, actuators, switchable wettability, bio-medical and environmental applications.

Multi-stimuli responsive polymers – the all-in-one talents

The integration of several responsive moieties within one polymer yields smart polymers exhibiting a multifaceted responsive behaviour.

Photoresponsive fluorescent reduced graphene oxide by spiropyran conjugated hyaluronic acid for in vivo imaging and target delivery

This present article demonstrates the strategy to prepare photoresponsive reduced graphene oxide with mussel inspired adhesive material dopamine (DN) and photochromic dye spiropyran (SP) conjugated to the backbone of the targeting ligand hyaluronic acid (HA; HA-SP). Graphene oxide (GO) was reduced by prepared HA-SP accepting the advantages of catechol chemistry under mildly alkaline condition enabling to achieve functionalized graphene (rGO/HA-SP) as fluorescent nanoparticles. Due to containing HA, rGO/HA-SP can bind to the CD44 cell receptors. The prepared rGO/HA-SP is able to retain its photochromic features and can be converted to merocyanine (MC) form upon irradiation with UV light (wavelength: 365 nm) displaying purple color. Photochromic behavior of rGO/HA-SP was monitored by UV-vis and fluorescence spectroscopy. In vitro fluorescence behavior, examined by confocal laser scanning microscope (CLSM), of rGO/HA-SP in cancerous A549 cell lines assured that efficient delivery of rGO/HA-SP was gained due to HA as targeting ligand. In this work, we have shown that in vivo fluorescence image of spiropyran is possible by administrating MC form solution of rGO/HA-SP using Balb/C mice as in vivo modal. Accumulation of rGO/HA-SP in tumor tissue from biodistribution analysis strongly supports the specific delivery of prepared graphene to the target destination. The well tuned drug release manner from the surface of rGO/HA-SP strongly recommends the developed material not only as fluorescent probe for diagnosis but also as a drug carrier in drug delivery system.

Reaction-based and single fluorescent emitter decorated ratiometric nanoprobe to detect hydrogen peroxide

A novel reaction-based cross-linked polymeric nanoprobe with a self-calibrating ratiometric fluorescence readout to selectively detect H2O2 is reported. The polymeric nanoprobe is fabricated by using hydrophobic H2O2-reactive boronic ester groups, crosslinker units, and environmentally sensitive 3-hydroxyflavone fluorophores through a miniemulsion polymerization. On treatment with H2O2, the boronic esters in the polymer are cleaved to form hydrophilic alcohols and subsequently lead to a hydrophobic-hydrophilic transition. Covalently linked 3-hydroxyflavones manifest the change in polarity as a ratiometric transition from green to blue, accompanied by a 500-fold increase in volume. Furthermore, this nanoprobe has been used for ratiometric sensing of glucose by monitoring the H2O2 generated during the oxidation of glucose by glucose oxidase, and thus successfully distinguished between normal and pathological levels of glucose.