DiSpiroXanthene-IndenoFluorene: A New Blue Emitter for Nondoped Organic Light Emitting Diode Applications

Dihydroindenofluorenes as building units in organic semiconductors for organic electronics

This review aims to discuss organic semiconductors constructed on dihydroindenofluorene positional isomers, which are key molecular scaffolds in organic electronics. Bridged oligophenylenes are key organic semiconductors that have allowed the development of organic electronic technologies. Dihydroindenofluorenes (DHIFs) belong to the family of bridged oligophenylenes constructed on a terphenyl backbone. They have proven to be very promising building blocks for the construction of highly efficient organic semiconductors for all OE devices, namely organic light emitting diodes (OLEDs), phosphorescent OLEDs, organic field-effect transistors (OFETs), solar cells, etc.

Rigidly Fused Spiro-Conjugated π-Systems

Spiro-fused π-systems have gained considerable attention for their application as semiconductors in molecular electronics. Here, a synopsis regarding recent breakthroughs in ladderized spirobifluorenes and indeno-spirobifluorenes, along with further spiro-condensed heteroatomic hydrocarbons with donor-acceptor moieties, is provided. Additionally, an extended range of rigid spirobifluorene polymers and specific doubly linked spiro-systems with partial chiral character is discussed. The diverse applications of the aforementioned structures are thoroughly evaluated.

Indole-Based Aza[n]helicenes (n=5, 6) with Violet-Blue Fluorescence and Two-Photon Absorption (TPA)

A series of indole-based helicenes, namely, 15-hexyl-15H-tetraphenyl[1,2-e]indole (HTPI), 14-hexyl-14H-benzo[4',5']thieno [2',3':7,8]naphtha[1,2-e]indole (HBTNI), 7-hexyl-7H-indolo[5,4-k] phenanthridine (HIPD) and 3-hexyl-3H-phenanthro[4,3-e]indole (HPI) were successfully synthesized by three- or four-step reactions. They exhibited good solubility and high thermal stability of T_d =247, 388, 294 and 251 °C, respectively. These compounds emit violet-blue light with maximum emission peaks at 415, 397, 397 and 391 nm in hexane. Among them, HBTNI had excellent thermal stability, narrow and sharp emission peaks, and highest photoluminescence quantum yield (0.32). Thus, HBTNI was an ideal candidate for the violet-blue emitters of OLEDs. Furthermore, the four compounds had two-photon absorption and two-photon excited fluorescence. HTPI showed the maximum TPA with the TPA cross-section (δ) of 171.5 GM at 770 nm. They were rare examples of helicenes with both violet-blue emission and TPA.

Synthesis and optoelectronic properties of spirofluorenexanthene-based carbazole host materials

The structure–property relationship of carbazole substituted SFX derivatives at different positions for RGB PhOLEDs.

9,10-Dihydro- as-indacenodithiophenes: Isomers with an as-Indacene Core

Two isomers of 9,10-dihydro- as-indacenodithiophenes (DIDTs) and the corresponding diketones having an as-indacene core were synthesized. Their thermal, photophysical, and electrochemical properties were investigated, revealing that they depend on the direction of the fusion of the thiophene rings. For the DIDTs, the effect of the mode of ring fusion on the physical properties is discussed by comparison with the previously reported derivatives of DIDT isomers with an s-indacene core. The observed difference between the highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) levels of the DIDT isomers is ascribed to the efficiency of π-conjugation, which depends on α- or β-linkage between the terminal thiophenes with the central benzene ring. In addition, the effect of the peripheral aromatic ring (thiophene or benzene) is elucidated by comparison with indeno[2,1- a]fluorene (DIF) bearing an as-indacene core. The HOMO levels of DIDTs are significantly raised compared to that of structurally related DIF because of electron-donating character of the thiophene rings. For the DIDT diketones, structural effect due to the proximate carbonyl groups is discussed by comparison with the isomers with remote carbonyl groups. In diketones bearing proximate carbonyl groups, the LUMO levels are destabilized owing to antibonding interaction between the carbonyl oxygen atoms, resulting in approach of the LUMO and LUMO+1 energy levels.

Spiro[pyrrol-benzopyran]-based probe with high asymmetry for chiroptical sensing via circular dichroism

We proposed an efficient approach to construct a novel spiro[pyrrol-benzopyran] scaffold with high asymmetry for reaction-based chiroptical sensing via circular dichroism.

An Efficient Synthesis of Spiro[indoline-3,9'-xanthene]trione Derivatives Catalyzed by Magnesium Perchlorate

A simple and efficient method for the synthesis of spiro[indoline-3,9′-xanthene]trione derivatives by means of condensation between isatins and 1,3-cyclohexanedione in the presence of a catalytic amount of magnesium perchlorate at 80 °C in 50% aqueous ethanol medium has been described. Notably, the present method offers desirable advantages of good yields, simplicity of workup procedure, easy purification, and reduced reaction times.

Electron-Rich 4-Substituted Spirobifluorenes: Toward a New Family of High Triplet Energy Host Materials for High-Efficiency Green and Sky Blue Phosphorescent OLEDs

We report herein a detailed structure-properties relationship study of the first examples of electron-rich 4-substituted spirobifluorenes for organic electronic applications, namely, 4-phenyl-N-carbazole-spirobifluorene (4-PhCz-SBF) and 4-(3,4,5-trimethoxyphenyl)-spirobifluorene (4-Ph(OMe)₃-SBF). The incorporation of the electron-rich moieties in the ortho position of the biphenyl linkage (position C4) induces unique properties, very different from those previously described in the literature for this family of semiconductors. Both dyes can be readily synthesized, possess high triplet energies and excellent thermal stability, and their HOMO energy levels are highly increased compared to those of other 4-substituted SBFs. We also provide in this work the first rationalization of the peculiar fluorescence of 4-substituted SBFs. Finally, the present dyes have been successfully incorporated as host in green and blue phosphorescent organic light-emitting diodes with high performance either for the green (EQE of 20.2%) or the blue color (EQE of 9.6%). These performances are, to the best of our knowledge, among the highest reported to date for 4-substituted SBF derivatives.

Organic Electronics: An El Dorado in the Quest of New Photocatalysts for Polymerization Reactions

Photoinitiated polymerization has been the subject of continued research efforts due to the numerous applications in which this polymerization technique is involved (coatings, inks, adhesives, optoelectronic, laser imaging, stereolithography, nanotechnology, etc.). More recently, photopolymerization has received renewed interest due to the emergence of 3D-printing technologies. However, despite current academic and industrial interest in photopolymerization methodologies, a major limitation lies in the slow rates of photopolymerization. The development of new photoinitiating systems aimed at addressing this limitation is an active area of research. Photopolymerization occurs through the exposure of a curable formulation to light, generating radical and/or cationic species to initiate polymerization. At present, photopolymerization is facing numerous challenges related to safety, economic and ecological concerns. Furthermore, practical considerations such as the curing depth and the competition for light absorption between the chromophores and other species in the formulation are key parameters drastically affecting the photopolymerization process. To address these issues, photoinitiating systems operating under low intensity visible light irradiation, in the absence of solvents are highly sought after. In this context, the use of photoredox catalysis can be highly advantageous; that is, photoredox catalysts can provide high reactivities with low catalyst loading, permitting access to high performance photoinitiating systems. However, to act as efficient photoredox catalysts, specific criteria have to be fulfilled. A strong absorption over the visible range, an ability to easily oxidize or reduce as well as sufficient photochemical stability are basic prerequisites to make these molecules desirable candidates for photoredox catalysis. Considering the similarity of requirements between organic electronics and photopolymerization, numerous materials initially designed for applications in organic electronics have been revisited in the context of photopolymerization. Organic electronics is a branch of electronics and materials science focusing on the development of semiconductors devoted to three main research fields; organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), and organic solar cells (OSCs). The contribution of organic electronics to the field of electronics is important as it paves the way toward cheaper, lighter, and more energy efficient devices. In the present context of photopolymerization, materials that were investigated as photocatalysts were indifferently organic semiconductors used for transistors, charge-transport materials, and light-emitting materials used in electroluminescent devices or conjugated polymers and small molecule dyes for solar cells. In this Account, we summarize our latest developments in elaborating on photocatalytic systems based on these new classes of compounds. Through an in-depth understanding of the parameters governing their reactivities and our efforts to incorporate these materials into photoinitiating systems, we provide new knowledge and a valuable insight for future prospects.

Synthesis of Spirocyclic Diarylfluorenes by One-Pot Twofold SNAr Reactions of Diaryl Sulfones with Diarylmethanes

Treatment of dibenzothiophene dioxides with cyclic diarylmethanes in the presence of KN(SiMe3)2 results in the formation of fluorene-based spirocyclic tetraarylmethanes in a single operation. The transformation would proceed via an intermolecular SNAr reaction of the dioxides with cyclic diarylmethylpotassium followed by intramolecular SNAr cyclization. This straightforward strategy provides a wide range of spirocyclic diarylfluorenes including unusual ones that are otherwise difficult to synthesize.

Energetic Tuning in Spirocyclic Conjugated Polymers

Precise control of the energy levels in a conjugated polymer is the key to allowing their exploitation in optoelectronic devices. The introduction of spirocycles into conjugated polymers has traditionally been used to enhance their solid state microstructure. Here we present a highly novel method of energetic tuning through the use of electronically active spirocyclic systems. By modifying the size and oxidation state of a heteroatom in an orthogonal spirocycle we demonstrate energetic fine tuning in both the absorption and emission of a conjugated polymer. Furthermore, the synthesis of highly novel triplet-decker spirocyclic conjugated polymers is presented. This new method of energetic manipulation in a conjugated polymer paves the way for future application targeted synthesis of polymers with electronically active spirocycles.

Synthesis of Fluoren-9-ones and Ladder-Type Oligo-p-phenylene Cores via Pd-Catalyzed Carbonylative Multiple C-C Bond Formation

A new route to various substituted fluoren-9-ones has been developed via an efficient Pd-catalyzed carbonylative multiple C-C bond formation. Under a CO atmosphere, using commercially available aryl halides and arylboronic acids as substrates, this three-component reaction proceeded smoothly in moderate to excellent yields with good functional-group compatibility. The mechanistic investigations suggested a sequential process for the reaction that forms o-bromobiaryls in the first stage followed by a cyclocarbonylation reaction. This chemistry has been successfully extended to construct ladder-type oligo-p-phenylene cores.

Additional insights into luminescence process of polycyclic aromatic hydrocarbons with carbonyl groups: photophysical properties of secondary N-alkyl and tertiary n,n-dialkyl carboxamides of naphthalene, anthracene, and pyrene

Here we report the substitution effects of N-alkyl and N,N-dialkyl carboxamide groups on the fluorescence properties of polycyclic aromatic hydrocarbon chromophores, so as to control their fluorescence properties. The fluorescence properties of compounds obtained using solvents with different polarities showed very little change, indicating that the modified compounds do not form charge transfer states. TD-DFT calculations and measurements performed at low temperature (78 K) and in viscous solvents revealed that the N-alkyl and N,N-dialkyl carboxamide groups tend to reduce the contributions from intersystem crossing and increase those from internal conversion. Considering that the fluorescence mechanism of low-fluorescence carbonyl compounds such as aldehyde and ketone is dominated by intersystem crossing and that of high-luminescence carbonyl compounds such as carboxylic acid and ester is dominated by a radiative process, it can be said that the photophysical process of N-alkyl and N,N-dialkyl carboxamides is novel. In addition, the calculation results for excited states indicated that such contributions can be controlled by selecting the appropriate polycyclic aromatic hydrocarbon or amide structure, in addition to solvent viscosity and temperature.

Indenofluorenes and derivatives: syntheses and emerging materials applications

The growing demand for flexible electronic devices and hydrogen storage materials has spurred a resurgence of interest in polyaryl hydrocarbons including graphene, acenes, fullerenes, polythiophenes, etc. Indenofluorenes are another polyaryl molecular scaffold that has shown utility in the organic and hybrid materials arena, with polymers incorporating the indeno[1,2-b]fluorene moiety being common in organic light emitting diodes. This review examines the syntheses and properties of the five distinct indenofluorene regioisomers, with a focus on small molecule applications in organic electronics of this intriguing and somewhat underexplored family of polyaryl hydrocarbons.

Synthesis, characterization, crystal structure and DFT studies on 1',3'-dihydrospiro[fluorene-9,2'-perimidine]

The title compound, 1',3'-dihydrospiro[fluorene-9,2'-perimidine] has been synthesized and characterized by NMR, ESI-MS, IR, elemental analysis, UV-vis and fluorescence spectroscopy. The crystal structures of the title compound and its co-crystal with 9-fluorenone have also been determined by X-ray single crystal diffraction. Density functional theory (DFT) calculations and vibrational frequencies have been performed at B3LYP/6-31G* level. The comparisons between the experimental vibrational frequencies and the predicted data show that B3LYP/6-31G* method can simulate the IR of the title compound on the whole. The theoretical electronic absorption spectra have been calculated by using TD-DFT method and compared with the experimental result. The solid-fluorescence determination of the title compound reveals two emission bans at 430 and 590 nm while its co-crystal reveals only one emission band at 590 nm.

Synthesis of a highly luminescent three-dimensional pyrene dye based on the spirobifluorene skeleton

We have synthesized a highly luminescent (log e > 5.0, F > 0.9) pyrene dye based on a spirobifluorene skeleton [2,2',7,7'-tetrakis(7-tert-butyl-1-pyrenyl)-9,9'-spirobi[9H-fluorene; 4-PySBF]. The use of spirobifluorene prevents fluorescence quenching by intramolecular energy transfer and/or electron transfer among the chromophores in the excited state. The emission spectra of 4-PySBF exhibited a red shift of 20 nm in comparison to a model compound [9,9'-dioctyl-2,7-bis(7-tert-butyl-1-pyrenyl)-9H-fluorene; 2-PyF], but its UV-Vis spectrum remained unchanged.