A Cationic Three-Coordinate Iron(II) Complex and the Reaction of β-Diketiminate with Ethyl Diazoacetate

Synthesis and Reactivity of Heteroleptic Ga-P-C Allyl Cation Analogues

Oxidative addition of cyclic alkyl(amino)carbene-coordinated phosphinidenes (Me cAAC)PX to LGa affords gallium-coordinated phosphinidenes LGa(X)-P(Me cAAC) (L=HC[C(Me)N(2,6-i-Pr2 C6 H3 )]2 ; X=Cl 1, Br 2), which react with NaBArF 4 and LiAl(ORF )4 to [LGaP(Me cAAC)][An] (An=B(C6 H3 (CF3 )2 )4 3, B(C6 F5 )4 4, Al(OC(CF3 )3 )4 5). The cations in 3-5 show substantial Ga-P double bond character and represent heteronuclear analogues of allyl cations according to quantum chemical calculations. The reaction of 4 with 4-dimethylaminopyridine (dmap) to adduct 6 confirms the strong electrophilic nature of the gallium center, whereas 5 reacts with ethyl isocyanate with C-C bond formation to the γ-C atom of the β-diketiminate ligand and formation of compound 7.

Scandium complexes containing β-diketiminato ligands with pendant phosphanyl groups: competition between Sc/γ-C [4 + 2] cycloaddition and Sc/P frustrated Lewis pair reactions

Scandium complexes based on β-diketimine bearing a phosphanyl group show divergent reaction pathways toward phenyl isocyanate, namely Sc/γ-C [4 + 2] cycloaddition and Sc/P FLP reactions.

Synthesis, characterization and catalytic activity of rare-earth metal amides incorporating cyclohexyl bridged bis(β-diketiminato) ligands

The bridged bis(β-diketiminato) ligands supported rare-earth amides exhibited high catalytic activity towards the hydrophosphination of β-nitroalkene and α,β-unsaturated carbonyl derivatives with an excellent regioselectivity.

Effects of Ligand Halogenation on the Electron Localization, Geometry and Spin State of Low-Coordinate (β-Diketiminato)iron Complexes

This contribution explores the influences of incorporating electron-withdrawing CF3 and halide groups into β-diketiminate iron complexes of tetrazene and isocyanide. The synthesis of a new halogenated β-diketimine (LCF3,ClH) was accomplished via two different methods, including a novel microwave-assisted synthesis that improves the yield of the difficult condensation. Treatment of an iron(II) complex of this ligand with reductant and azide gives two diiron complexes with novel tetrazenes as bridging ligands. Structural and Mössbauer data show that the bridging tetrazene is a radical anion. The halogenation of the supporting ligand also influences iron(I) complexes of the type LFe(CNtBu)2, which are low-spin and square-planar with alkyl substituents but high-spin and pseudotetrahedral with halogen substituents. DFT calculations suggest that the changes from halogenation come from a combination of steric and electronic effects, and that the electronic influence of ligand halogenation is minor.

Activation of CS2 by a “masked” terminal nickel sulfide

Activation of carbon disulfide (CS₂) by “masked” terminal nickel sulfide, [K(18-crown-6)][(L^tBu)Ni(S)], gives a trithiocarbonate complex. This result confirms the nucleophilicity of the sulfide ligand and expands the scope of reactivity for late metal sulfides.

On the non-innocence of “Nacnacs”: ligand-based reactivity in β-diketiminate supported coordination compounds

While β-diketiminate (BDI or ‘nacnac’) ligands have been widely adopted to stabilize a wide range of metal ions in multiple oxidation states and coordination numbers, in several occurrences these ligands do not behave as spectators and participate in reactivity.

Linear and T-Shaped Iron(I) Complexes Supported by N-Heterocyclic Carbene Ligands: Synthesis and Structure Characterization

The use of the N-heterocyclic carbene (NHC) ligands 1,3-bis(2',6'-diethylphenyl)-4,5-(CH2)4-imidazol-2-ylidene (cyIDep), 1,3-bis(2',6'-diethylphenyl)-imidazolin-2-ylidene (sIDep), and its N-mesityl analogue sIMes enables the preparation of the two-coordinate homoleptic iron(I)-NHC complexes [(cyIDep)2Fe][BAr(F)4] (3, Ar(F) denoted for 3,5-di(trifluoromethyl)phenyl) and [(sIDep)2Fe][BAr(F)4] (4) and the T-shaped iron(I)-NHC complex [(sIMes)2Fe(THF)][BPh4] (5, THF = tetrahydrofuran). Complexes 3-5 were prepared via the sequential protocol of control reduction of iron(II) dihalides by KC8 in the presence of the corresponding NHC ligands followed by halide-abstraction with NaBAr4. Spectroscopic characterization, including single-crystal X-ray diffraction studies and (57)Fe Mössbauer spectroscopy, in combination with density functional theory calculations, suggest their high-spin nature. Solution property study (absorption spectroscopy and cyclic voltammetry) indicates that 3 and 5 keep their corresponding two- and three-coordinate nature in THF solution, and 4 might reversibly coordinate a THF molecule to form, presumably, the T-shaped species [(sIDep)2Fe(THF)][BAr(F)4]. The isolation of 3 and 4 demonstrates the accessibility of homoleptic two-coordinate iron(I)-NHC complexes.

Quantitative geometric descriptions of the belt iron atoms of the iron-molybdenum cofactor of nitrogenase and synthetic iron(II) model complexes

Six of the seven iron atoms in the iron-molybdenum cofactor of nitrogenase display an unusual geometry, which is distorted from the tetrahedral geometry that is most common in iron-sulfur clusters. This distortion pulls the iron along one C3 axis of the tetrahedron toward a trigonal pyramid. The trigonal pyramidal coordination geometry is rare in four-coordinate transition metal complexes. In order to document this geometry in a systematic fashion in iron(II) chemistry, we have synthesized a range of four-coordinate iron(II) complexes that vary from tetrahedral to trigonal pyramidal. Continuous shape measures are used for a quantitative comparison of the stereochemistry of the Fe atoms in the iron-molybdenum cofactor with those of the presently and previously reported model complexes, as well as with those in polynuclear iron-sulfur compounds. This understanding of the iron coordination geometry is expected to assist in the design of synthetic analogues for intermediates in the nitrogenase catalytic cycle.

Macrocyclic Binucleating β-Diketiminate Ligands and their Lithium, Aluminum, and Zinc Complexes

The incorporation of rigid aromatic linkers into β-diketiminate ligands creates a binucleating scaffold that holds two metals near each other. This paper discloses the synthesis, characterization, and reactivity of mBin(2-), which has a meta-substituted xylylene spacer, and pBin(2-), which has a para-substituted xylylene spacer. Lithium, aluminum, and zinc complexes of each ligand are isolated, and in some cases are characterized by X-ray crystallography. The lithium complexes are coordinated to solvent-derived THF ligands, while the zinc and aluminum complexes have alkyl ligands. Complexes of the mBin(2-) ligand have an anti conformation in which the metals are on opposite sides of the macrocycle, while pBin(2-) complexes prefer a syn conformation. The (1)H NMR spectra of the complexes demonstrate that the conformations rapidly interconvert in the lithium complexes, and less rapidly in the zinc and aluminum complexes.

Synthesis, molecular structure and norbornene polymerization behavior of three-coordinate nickel(i) complexes with chelating anilido-imine ligands

Reaction of lithium salts of anilido-imine ligands bearing bulky substituentes on the nitrogen donor atoms with trans-chloro(phenyl)bis(triphenylphosphane)nickel(II) results in the formation of two rare three-coordinate nickel(I) complexes [(Ar1N=CHC6H4NAr2)Ni(I)PPh3] (1: Ar1 = Ar2 = 2,6-i-Pr2C6H3; 2: Ar1 = 2,6-Me2C6H3, Ar2 = 2,6-i-Pr2C6H3). The molecular structures of complexes 1 and 2 have been confirmed by single crystal X-ray analyses. These two complexes exhibit paramagnetic properties as measured by their EPR and 1H NMR spectra. After being activated with methylaluminoxane (MAO) these complexes could polymerize norbornene to afford addition-type polynorbornene (PNB) with high molecular weight M(w) (10(6) g mol(-1)), catalytic activities being high, up to 2.82 x 10(7) g(PNB) mol(-1)(Ni) h(-1).