Reduction of Titanium(IV)-Phosphinimide Complexes: Routes to Ti(III) Dimers, Ti(IV)-Metallacycles, and Ti(II) Species

Titanium(II) as a Fuel Atom in Energetic Materials

The energetic content of the compounds MgTp₂, FeTp₂, MnTp₂, and TiTp₂ is measured by bomb calorimetry and compared to theoretical calculations (Tp = trispyrazoylborate). TiTp₂ had the largest heat of combustion of the four compounds. Comparison of the heat of combustion of the Ti complex to those of Mg and Mn complexes suggests an effective combustion energy of Ti^II of between 1400 and 3000 kJ/mol, affirming the role of Ti^II as a strong fuel atom.

An Isolable Azide Adduct of Titanium(II) Follows Bifurcated Deazotation Pathways to an Imide

AdN₃ (Ad = 1-adamantyl) reacts with the tetrahedral Ti^II complex [(Tp^tBu,Me)TiCl] (Tp^tBu,Me = hydrotris(3-tert-butyl-5-methylpyrazol-1-yl)borate) to generate a mixture of an imide complex, [(Tp^tBu,Me)TiCl(NAd)] (4), and an unusual and kinetically stable azide adduct of the group 4 metal, namely, [(Tp^tBu,Me)TiCl(γ-N₃Ad)] (3). In these conversions, the product distribution is determined by the relative concentration of reactants. In contrast, the azide adduct 3 forms selectively when a masked Ti^II complex (N₂ or AdNC adduct) reacts with AdN₃. Upon heating, 3 extrudes dinitrogen in a unimolecular process proceeding through a titanatriazete intermediate to form the imide complex 4, but the observed thermal stability of the azide adduct (t_1/2 = 61 days at 25 °C) is at odds with the large fraction of imide complex formed directly in reactions between AdN₃ and [(Tp^tBu,Me)TiCl] at room temperature (∼50% imide with a 1:1 stoichiometry). A combination of theoretical and experimental studies identified an additional deazotation pathway, proceeding through a bimetallic complex bridged by a single azide ligand. The electronic origin of this deazotation mechanism lies in the ability of azide adduct 3 to serve as a π-backbonding metallaligand toward free [(Tp^tBu,Me)TiCl]. These findings unveil a new class of azide-to-imide conversions for transition metals, highlighting that the mechanisms underlying this common synthetic methodology may be more complex than conventionally assumed, given the concentration dependence in the conversion of an azide into an imide complex. Lastly, we show how significantly different AdN₃ reacts when treated with [(Tp^tBu,Me)VCl].

A Mononuclear and High-Spin Tetrahedral TiII Complex

A high-spin, mononuclear TiII complex, [(TptBu,Me)TiCl] [TptBu,Me- = hydridotris(3-tert-butyl-5-methylpyrazol-1-yl)borate], confined to a tetrahedral ligand-field environment, has been prepared by reduction of the precursor [(TptBu,Me)TiCl2] with KC8. Complex [(TptBu,Me)TiCl] has a 3A2 ground state (assuming C3v symmetry based on structural studies), established via a combination of high-frequency and -field electron paramagnetic resonance (HFEPR) spectroscopy, solution and solid-state magnetic studies, Ti K-edge X-ray absorption spectroscopy (XAS), and both density functional theory and ab initio (complete-active-space self-consistent-field, CASSCF) calculations. The formally and physically defined TiII complex readily binds tetrahydrofuran (THF) to form the paramagnetic adduct [(TptBu,Me)TiCl(THF)], which is impervious to N2 binding. However, in the absence of THF, the TiII complex captures N2 to produce the diamagnetic complex [(TptBu,Me)TiCl]2(η1,η1;μ2-N2), with a linear Ti═N═N═Ti topology, established by single-crystal X-ray diffraction. The N2 complex was characterized using XAS as well as IR and Raman spectroscopies, thus establishing this complex to possess two TiIII centers covalently bridged by an N22- unit. A π acid such as CNAd (Ad = 1-adamantyl) coordinates to [(TptBu,Me)TiCl] without inducing spin pairing of the d electrons, thereby forming a unique high-spin and five-coordinate TiII complex, namely, [(TptBu,Me)TiCl(CNAd)]. The reducing power of the coordinatively unsaturated TiII-containing [(ΤptBu,Me)TiCl] species, quantified by electrochemistry, provides access to a family of mononuclear TiIV complexes of the type [(TptBu,Me)Ti═E(Cl)] (with E2- = NSiMe3, N2CPh2, O, and NH) by virtue of atom- or group-transfer reactions using various small molecules such as N3SiMe3, N2CPh2, N2O, and the bicyclic amine 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene.

Cyclic Bis-alkylidene Complexes of Titanium and Zirconium: Synthesis, Characterization, and Reaction

Transition-metal alkylidenes have exhibited wide applications in organometallic chemistry and synthetic organic chemistry, however, cyclic Schrock-carbene-like bis-alkylidenes of group 4 metals with a four-electron donor from an alkylidene have not been reported. Herein, the synthesis and characterization of five-membered cyclic bis-alkylidenes of titanium (4 a,b) and zirconium (5 a,b) are reported, as the first well-defined group 4 metallacyclopentatrienes, by two-electron reduction of their corresponding titana- and zirconacyclopentadienes. DFT analyses of 4 a show a four-electron donor (σ-donation and π-donation) from an alkylidene carbon to the metal center. The reaction of 4 a with N,N'-diisopropylcarbodiimide (DIC) leads to the [2+2]-cycloaddition product 6. Compound 4 a reacted with CO, affording the oxycyclopentadienyl titanium complex 7. These reactivities demonstrate the multiple metal-carbon bond character. The reactions of 4 a or 5 a with cyclooctatetraene (COT) or azobenzene afforded sandwich titanium complex 8 or diphenylhydrazine-coordinated zirconacyclopentadiene 9, respectively, which exhibit two-electron reductive ability.

New Insights in Frustrated Lewis Pair Chemistry with Azides

The geminal frustrated Lewis pair (FLP) tBu2 PCH2 BPh2 (1) reacts with phenyl-, mesityl-, and tert-butyl azide affording, respectively, six, five, and four-membered rings as isolable products. DFT calculations revealed that the formation of all products proceeds via the six-membered ring structure, which is thermally stable with an N-phenyl group, but rearranges when sterically more encumbered Mes-N3 and tBu-N3 are used. The reaction of 1 with Me3 Si-N3 is believed to follow the same course, yet subsequent N2 elimination occurs to afford a four-membered heterocycle (5), which can be considered as a formal FLP-trimethylsilylnitrene adduct. Compound 5 reacts with hydrochloric acid or tetramethylammonium fluoride and showed frustrated Lewis pair reactivity towards phenylisocyanate.

Generation of TiII Alkyne Trimerization Catalysts in the Absence of Strong Metal Reductants

Low-valent Ti^II species have typically been synthesized by the reaction of Ti^IV halides with strong metal reductants. Herein we report that Ti^II species can be generated simply by reacting Ti^IV imido complexes with 2 equiv of alkyne, yielding a metallacycle that can reductively eliminate pyrrole while liberating Ti^II. In order to probe the generality of this process, Ti^II-catalyzed alkyne trimerization reactions were carried out with a diverse range of Ti^IV precatalysts.

η(6) -Arene-Zirconium-PNP-Pincer Complexes: Mechanism of Their Hydrogenolytic Formation and Their Reactivity as Zirconium(II) Synthons

The cyclometalated monobenzyl complexes [(Cbzdiphos(R) -CH)ZrBnX] 1 (iPr) Cl and 1 (Ph) I reacted with dihydrogen (10 bar) to yield the η(6) -toluene complexes [(Cbzdiphos(R) )Zr(η(6) -tol)X] 2 (iPr) Cl and 2 (Ph) I (cbzdiphos=1,8-bis(phosphino)-3,6-di-tert-butyl-9H-carbazole). The arene complexes were also found to be directly accessible from the triiodide [(Cbzdiphos(Ph) )ZrI3 ] through an in situ reaction with a dibenzylmagnesium reagent and subsequent hydrogenolysis, as exemplified for the η(6) -mesitylene complex [(Cbzdiphos(Ph) )Zr(η(6) -mes)I] (3 (Ph) I). The tolyl-ring in 2 (iPr) Cl adopts a puckered arrangement (fold angle 23.3°) indicating significant arene-1,4-diido character. Deuterium labeling experiments were consistent with an intramolecular reaction sequence after the initial hydrogenolysis of a Zr-C bond by a σ-bond metathesis. A DFT study of the reaction sequence indicates that hydrogenolysis by σ-bond metathesis first occurs at the cyclometalated ancillary ligand giving a hydrido-benzyl intermediate, which subsequently reductively eliminates toluene that then coordinates to the Zr atom as the reduced arene ligand. Complex 2 (Ph) I was reacted with 2,6-diisopropylphenyl isocyanide giving the deep blue, diamagnetic Zr(II) -diisocyanide complex [(Cbzdiphos(Ph) )Zr(CNDipp)2 I] (4 (Ph) I). DFT modeling of 4 (Ph) I demonstrated that the HOMO of the complex is primarily located as a "lone pair on zirconium", with some degree of back-bonding into the C≡N π* bond, and the complex is thus most appropriately described as a zirconium(II) species. Reaction of 2 (Ph) I with trimethylsilylazide (N3 TMS) and 2 (iPr) Cl with 1-azidoadamantane (N3 Ad) resulted in the formation of the imido complexes [(Cbzdiphos(R) )Zr=NR'(X)] 5 (iPr) Cl-NAd and 5 (Ph) I-NTMS, respectively. Reaction of 2 (iPr) Cl with azobenzene led to N-N bond scission giving 6 (iPr) Cl, in which one of the NPh-fragments is coupled with the carbazole nitrogen to form a central η(2) -bonded hydrazide(-1), whereas the other NPh-fragment binds to zirconium acting as an imido-ligand. Finally, addition of pyridine to 2 (iPr) Cl yielded the dark purple complex [(Cbzdiphos(iPr) )Zr(bpy)Cl] (7 (iPr) Cl) through a combination of CH-activation and C-C-coupling. The structural data and UV/Vis spectroscopic properties of 7 (iPr) Cl indicate that the bpy (bipyridine) may be regarded as a (dianionic) diamido-type ligand.

Mixed amido-cyclopentadienyl group 4 metal complexes

Two different kinds of nitrogen ligands and two Cp ligands with different electronic and steric effects were employed in order to demonstrate variability of the group 4 metal coordination spheres.

Synthesis of titanium and zirconium complexes supported by a p-terphenoxide ligand and their reactions with N2, CO2 and CS2

The synthesis, characterization and reactions of a series of titanium and zirconium complexes that incorporate a p-terphenolate ligand are described.

Titanium "constrained geometry" complexes with pendant arene groups

The synthesis of the proligands C(5)Me(4)HSiMe(2)N(H)R) (R = CMe(2)Ph 1, 2-C(6)H(4)Ph 2) was accomplished via a straightforward salt metathesis reaction of the appropriate lithium amide and ClSiMe(2)(C(5)Me(5)H). Generation of the dilithio salt and reaction with TiCl(3)·(THF)(3) followed by oxidation gave C(5)Me(4)SiMe(2)N(C(6)H(4)Ph)TiCl(2) (3) in low yield. In contrast, deprotonation of 1 and 2 and reaction with (Me(2)N)(2)TiCl(2) afforded C(5)Me(4)(SiMe(2)NR)Ti(NMe(2))(2) (R = CMe(2)Ph 4, 2-C(6)H(4)Ph 5), respectively, in good yields Treatment with MeI gave the analogs C(5)Me(4)(SiMe(2)NR)TiI(2) (R = CMe(2)Ph 6, 2-C(6)H(4)Ph 7). Reduction of 7 with potassium graphite afforded C(5)Me(4)(SiMe(2)NC(6)H(4)Ph)Ti 8. Treatment of 6 and 7 with MeMgBr afforded C(5)Me(4)(SiMe(2)NR)TiMe(2) (R = CMe(2)Ph 9, 2-C(6)H(4)Ph 10). Complexes 9 and 10 in combination with the activator [Ph(3)C][B(C(6)F(5))(4)] catalyzed the polymerization of styrene and ethylene. Copolymerization was also investigated. While the catalyst derived from 10 showed poor activity, compound 9 showed markedly higher activity than 10 and (C(5)Me(4))SiMe(2)(NtBu)]TiMe(2).

Hafnium–phosphinimide complexes

A series of phosphinimide complexes of Hf are prepared and characterized. Reaction of the phosphinimine t-Bu3PNH with Hf(NEt2)4 gave (t-Bu3PN)Hf(NEt2)3 (1) but this species was not readily converted to the corresponding HfCl3-derivative. The reaction of 2 equiv. of t-Bu3PNH with Hf(NEt2)4, however, gave (t-Bu3PN)2Hf(NEt2)2 (2), which was readily converted to (t-Bu3PN)2HfCl2 (3) and (t-Bu3PN)2HfMe2 (4). Employing t-Bu3PNLi and HfCl4 afforded (t-Bu3PN)3HfCl (5) while reaction with CpHfCl3 gave rise to ligand redistribution reactions affording (t-Bu3PN)2HfCl2 and Cp2HfCl2. However, Cp(t-Bu3PN)2HfCl (7) was prepared by treating (t-Bu3PN)2HfCl2 with CpNa. The related species of Cp2(t-Bu3PN)HfCl (8) was synthesized by the reaction of Cp2HfCl2 and t-Bu3PNLi. Ligand redistribution was avoided in the reaction of Cp*HfCl3 as Cp*(t-Bu3PN)HfCl2 (9) and Cp*(i-Pr3PN)HfCl2 (10) were readily obtained and derivatized as Cp*(t-Bu3PN)Hf(NMe2)2 (11) and Cp*(t-Bu3PN)HfMe2 (12), respectively. Similarly, ((Me3Si)2C5H3)(t-Bu3PN)HfCl2 (13) was converted to ((Me3Si)2C5H3)(t-Bu3PN)HfMe2 (14). Reactions with Lewis acid activators were used to prepare Cp*(t-Bu3PN)HfMe(THF)MeB(C6F5)3 (15), (Cp*(t-Bu3PN)HfMe)(B(C6F5)4) (16), and (t-Bu3PN)2Hf(H2B(C6F5)2)2 (17). Preliminary testing of 3, 9, and 13 in ethylene polymerization is reported. Compounds 3, 4, 7, 9, and 17 are characterized crystallographically.

Remarkable two-step, four-electron oxidative addition reactions at phosphorus [P(I)–P(V)] in terminal electrophilic phosphinidene complexes

The reactivity of the terminal phosphinidene complex [Re(CO)5{η1-P(NiPr2)}]AlCl4 towards the oxidants S8 and Me3SnN3 has been investigated. These result in unprecedented four-electron oxidative addition reactions, affording complexes containing the P(V) ligands η1-P(=S)(Cl)(NiPr2) and η1-P(=NR)(Cl)(NiPr2), respectively. DFT calculations support the proposed mechanism.Key words: electrophilic phosphinidene, low coordinate phosphorus, rhenium, oxidative addition, P(I) ligand.

Catalytic PH Activation by Ti and Zr Catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.

Formation of Phosphorus−Nitrogen Bonds by Reduction of a Titanium Phosphine Complex under Molecular Nitrogen

The reduction of high oxidation state metal complexes in the presence of molecular nitrogen is one of the most common methods to synthesize a dinitrogen complex. However, the presence of strong reducing agents combined with the poor binding ability of N2 can lead to unanticipated outcomes. For example, the reduction of [NPN]ZrCl2(THF) (where NPN = PhP(CH2SiMe2NPh)2) with KC8 under N2 leads to the formation of the side-on bridged dinuclear dinitrogen complex ([NPN]Zr(THF))2(mu-eta2:eta2-N2) with an N-N bond distance of 1.503(3) A; however, reduction of the corresponding titanium precursor, [NPN]TiCl2, under N2 does not generate a dinitrogen complex, rather the bis(phosphinimide) derivative, ([N(PN)N]Ti)2, is isolated in which the added N2 is incorporated between the titanium and phosphine centers. Performing the reaction under 15N2 results in the 15N label being incorporated in the phosphinimide unit. A suggested mechanism for this process involves an initially formed dinitrogen complex being over reduced to generate a species with bridging nitrides that undergoes nucleophilic attack by the coordinated phosphine ligands and formation of the P=N bond of the phosphinimide.

Homoleptic magnesium bis-phosphinimide derivatives

The homoleptic Mg-phosphinimide complexes Mg2(µ-NP-t-Bu3)2(NP-t-Bu3)2 (1) and Mg3(µ-NP-i-Pr3)4(NP-i-Pr3)2 (2) were obtained from the reaction of 2 equiv. of the phosphinimines HNPR3 (R = t-Bu, i-Pr) with MgBu2. Spectroscopic and crystallographic studies confirmed the dimeric and trimeric structures of compounds 1 and 2, respectively. Key words: magnesium, phosphinimides, homoleptic, crystal stuctures.