Reactions of Cyclopentadienyl-Amidinate Titanium Imido Compounds with CS2, COS, Isocyanates, and Other Unsaturated Organic Compounds

Reactions of Heteroallenes with Salan-based Ti(IV) Complexes: A Joint Experimental and Computational Study

The reaction of Ti(NMe2)4 with the salan ligand precursor H2N2O2H2 led to the formation of [(L*)Ti(NHMe2)2] (L*=N2O2 4-) that forms [(H2N2O2)TiCl2] upon reaction with two equiv. of Me3SiCl. [(L*)Ti(py)2] was obtained from the reaction of [Ti(NtBu)Cl2(py)3] with the sodium salt H2N2O2Na2. Treatment of [(L*)Ti(NHMe2)2] with two equiv. of tBuNCO led to the insertion of the isocyanate molecules into the Ti-Nsalan bonds with the formation of [{L*(N(tBu)CO)2}Ti]. Conversely, the reaction of [(H2N2O2)Ti(OiPr)2] with two equiv. of tBuNCO led to the insertion of one isocyanate molecule into a Ti-Nsalan bond with the formation of [{(HN2O2)(N(tBu)CO)}Ti(OiPr)]. Computational studies were performed to gain insight into the reactivity of isocyanates with salan-based Ti(IV) complexes.

Coordination-induced bond weakening and small molecule activation by low-valent titanium complexes

Bond activation of small molecules through coordination to low valent metal complexes in M⋯X-H type interactions (where X = O, N, B, Si, etc.) leads to the formation of unusually weak X-H bonds and provides a powerful approach for the synthesis of target compounds under very mild conditions. Coordination of small molecules like water, amides, silanes, boranes, and dinitrogen to Ti(III) or Ti(II) complexes results in the synergetic redistribution of electrons between the metal orbitals and the ligand orbitals which weakens and enables the facile cleavage of the X-H or N-N bonds of the ligands. This review presents an overview of coordination-induced bond activation of small molecules by low valent titanium complexes. In particular, the applications of low valent titanium-induced bond weakening in nitrogen fixation are presented. The review concludes with potential future directions for work in this area including low-valent Ti-based PCET systems, photocatalytic nitrogen reduction, and approaches to tailoring complexes for optimal bond activation.

Multielectron Bond Cleavage Processes Enabled by Redox-Responsive Phosphinimide Ligands

The activation of small molecules via multielectron redox processes offers promise in mediating difficult transformations related to energy conversion processes. While molecular systems that engage in one- and two-electron redox processes are widespread, those that participate in the direct transfer of four or more electrons to small molecules are very rare. To that end, we report a mononuclear CrII complex competent for the 4-electron reduction of dioxygen (O2) and nitrosoarenes. These systems additionally engage in facile two-electron group transfer reactivity, including O atom excision and nitrene transfer. Structural, spectroscopic, and computational studies support bond activation processes that intimately occur at a mononuclear chromium(phosphinimide) center and highlight the unusual structural responsiveness of the phosphinimides in stabilizing a range of metal redox states.

A mononuclear, terminal titanium(III) imido

We report the first mononuclear TiIII complex possessing a terminal imido ligand. Complex [TptBu,MeTi{NSi(CH3)3}(THF)] (2) (TptBu,Me = hydridotris(3-tert-butyl-5-methylpyrazol-1-yl)borate) is prepared by reduction of [TptBu,MeTi{NSi(CH3)3}(Cl)] (1) with KC8 in high yield. The connectivity and metalloradical nature of 2 were confirmed by single crystal X-ray diffraction studies, Q- and X-band EPR, UV-Vis and 1H NMR spectroscopies. The d1 complex [(TptBu,Me)TiCl(OEt2)][B(C6F5)4] (3), was prepared to spectroscopically compare it to 2. Electrochemical studies of 1 and 2 reveal a reversible 1e- process, and chemical oxidants ClCPh3 or 1/2 eq. XeF2 react cleanly with 2 yielding 1 or the fluoride derivative [TptBu,MeTi{NSi(CH3)3}(F)] (4), respectively.

Synthesis and Reactivity of Acyclic Germanimines: Silyl Rearrangement and Cycloadditions

We report the synthesis of aromatic germanimines [(HMDS)₂Ge═NAr] (Ar = Ph, Mes, Dipp; Mes = 2,4,6-Me₃C₆H₂, Dipp = 2,6-iPr₂C₆H₃) and an investigation into their associated reactivity. [(HMDS)₂Ge═NPh] decomposes above -30 °C, while [(HMDS)₂Ge═NDipp] engages in an intramolecular reaction at 60 °C. [(HMDS)₂Ge═NMes] was shown to rearrange via a 1,3-silyl migration to give [(HMDS){(SiMe₃)(Mes)N}Ge(NSiMe₃)] in a 1:7 equilibrium mixture at room temperature. These latter germanimines react with unsaturated polar substrates such as CO₂, ketones, and arylisocyanate via a [2 + 2] cycloaddition pathway.

Direct imidation of lactones via catalytic oxo/imido heterometathesis

We report the first examples of direct imidation of lactones giving the corresponding cyclic imidates via oxo/imido heterometathesis with N-sulfinylamines catalysed by a well-defined silica-supported Ti imido complex.

1,2-Addition and cycloaddition reactions of niobium bis(imido) and oxo imido complexes

The bis(imido) complexes (BDI)Nb(N t Bu)2 and (BDI)Nb(N t Bu)(NAr) (BDI = N,N'-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate; Ar = 2,6-diisopropylphenyl) were shown to engage in 1,2-addition and [2 + 2] cycloaddition reactions with a wide variety of substrates. Reaction of the bis(imido) complexes with dihydrogen, silanes, and boranes yielded hydrido-amido-imido complexes via 1,2-addition across Nb-imido π-bonds; some of these complexes were shown to further react via insertion of carbon dioxide to give formate-amido-imido products. Similarly, reaction of (BDI)Nb(N t Bu)2 with tert-butylacetylene yielded an acetylide-amido-imido complex. In contrast to these results, many related mono(imido) Nb BDI complexes do not exhibit 1,2-addition reactivity, suggesting that π-loading plays an important role in activating the Nb-N π-bonds toward addition. The same bis(imido) complexes were also shown to engage in [2 + 2] cycloaddition reactions with oxygen- and sulfur-containing heteroallenes to give carbamate- and thiocarbamate-imido complexes: some of these complexes readily dimerized to give bis-μ-sulfido, bis-μ-iminodicarboxylate, and bis-μ-carbonate complexes. The mononuclear carbamate imido complex (BDI)Nb(NAr)(N( t Bu)CO2) (12) could be induced to eject tert-butylisocyanate to generate a four-coordinate terminal oxo imido intermediate, which could be trapped as the five-coordinate pyridine or DMAP adduct. The DMAP adducted oxo imido complex (BDI)NbO(NAr)(DMAP) (16) was shown to engage in 1,2-addition of silanes across the Nb-oxo π-bond; this represents a new reaction pathway in group 5 chemistry.

Reactivity of terminal imido complexes of group 4-6 metals: stoichiometric and catalytic reactions involving cycloaddition with unsaturated organic molecules

Imido complexes of early transition metals are key intermediates in the synthesis of many nitrogen-containing organic compounds. The metal-nitrogen double bond of the imido moiety undergoes [2+2] cycloaddition reactions with various unsaturated organic molecules to form new nitrogen-carbon and nitrogen-heteroatom bonds. This review article focuses on reactivity of the terminal imido complexes of Group 4-6 metals, summarizing their stoichiometric reactions and catalytic applications for a variety of reactions including alkyne hydroamination, alkyne carboamination, pyrrole formation, imine metathesis, and condensation reactions of carbonyl compounds with isocyanates.

Reactivity of Ce(iv) imido compounds with heteroallenes

The reactivity of alkali metal capped Ce(iv) imido compounds [M(DME)₂][CeNAr^F(TriNOx)] (1-M with M = K, Rb, Cs and Ar^F = 3,5-bis(trifluoromethyl)phenyl) with CO₂ and organic isocyanates has been evaluated.

Carbodiimide Synthesis via Ti-Catalyzed Nitrene Transfer from Diazenes to Isocyanides

Simple Ti imido halide complexes such as [Br₂Ti(N ^t Bu)py₂]₂ are competent catalysts for the synthesis of unsymmetrical carbodiimides via Ti-catalyzed nitrene transfer from diazenes or azides to isocyanides. Both alkyl and aryl isocyanides are compatible with the reaction conditions, although product inhibition with sterically unencumbered substrates sometimes limits the yield when diazenes are employed as the oxidant. The reaction mechanism has been investigated both experimentally and computationally, wherein a key feature is that the product release is triggered by electron transfer from an η ²-carbodiimide to a Ti-bound azobenzene. This ligand-to-ligand redox buffering obviates the need for high-energy formally Ti^II intermediates and provides further evidence that substrate and product "redox noninnocence" can promote unusual Ti redox catalytic transformations.

Catalytic Oxo/Imido Heterometathesis by a Well-Defined Silica-Supported Titanium Imido Complex

Grafting Ti(=NtBu)(Me₂ Pyr)₂ (py)₂ (Me₂ Pyr= 2,5-dimethylpyrrolyl, py=pyridine) onto the surface of silica partially dehydroxylated at 700 °C gives the well-defined silica-supported Ti imido complex (≡SiO)Ti(=NtBu)(Me₂ Pyr)(py)₂ , which is fully characterized by IR and solid-state NMR spectroscopy as well as elemental and mass balance analyses. While stoichiometric imido-transfer reactivity is typical for Ti imides, the obtained surface complex is unique in that it enables catalytic transformations involving Ti imido and oxo intermediates. In particular, it efficiently catalyzes imidation of carbonyl compounds with N-sulfinylamines by oxo/imido heterometathesis.

New Titanium Borylimido Compounds: Synthesis, Structure, and Bonding

We report a combined experimental and computational study of the synthesis and electronic structure of titanium borylimido compounds. Three new synthetic routes to this hitherto almost unknown class of Group 4 imide are presented. The double-deprotonation reaction of the borylamine H₂NB(NAr'CH)₂ (Ar' = 2,6-C₆H₃ⁱPr₂) with Ti(NMe₂)₂Cl₂ gave Ti{NB(NAr'CH)₂}Cl₂(NHMe₂)₂, which was easily converted to Ti{NB(NAr'CH)₂}Cl₂(py)₃. This compound is an entry point to other borylimides, for example, reacting with Li₂N₂^pyrN^Me to form Ti(N₂^pyrN^Me){NB(NAr'CH)₂}(py)₂ and with 2 equiv of NaCp to give Cp₂Ti{NB(NAr'CH)₂}(py) (23). Borylamine-tert-butylimide exchange between H₂NB(NAr'CH)₂ and Cp*Ti(N^tBu)Cl(py) under forcing conditions afforded Cp*Ti{NB(NAr'CH)₂}Cl(py), which could be further substituted with guanidinate or pyrrolide-amine ligands to give Cp*Ti(hpp){NB(NAr'CH)₂} (16) and Cp*Ti(N^pyrN^Me₂){NB(NAr'CH)₂} (17). The Ti-N_im distances in compounds with the NB(NAr'CH)₂ ligand were comparable to those of the corresponding arylimides. Dialkyl- or diaryl-substituted borylamines do not undergo the analogous double-deprotonation or imide-amine exchange reactions. Reaction of (Cp″₂Ti)₂(μ₂:η¹,η¹-N₂) with N₃BMes₂ gave the base-free, diarylborylimide Cp″₂Ti(NBMes₂) (26) by an oxidative route; this compound has a relatively long Ti-N_im bond and large Cp″-Ti-Cp″ angle. Reaction of 16 with H₂N^tBu formed equilibrium mixtures with H₂NB(NAr'CH)₂ and Cp*Ti(hpp)(N^tBu) (Δ_rG = -1.0 kcal mol^-1). In contrast, the dialkylborylimide Cp*Ti{MeC(NⁱPr)₂}(NBC₈H₁₄) (2) reacted quantitatively with H₂N^tBu to give the corresponding tert-butylimide and borylamine. The electronic structures and imide-amine exchange reactions of half-sandwich and sandwich titanium borylimides have been evaluated using density functional theory (DFT), supported by quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analysis, and placed more generally in context with the well-established alkyl- and arylimides and hydrazides. The calculations find that Ti-N_im bonds for borylimides are stronger and more covalent than in their organoimido or hydrazido analogues, and are strongest for alkyl- and arylborylimides. Borylamine-tert-butylimide exchange reactions fail for H₂NBR₂ (R = hydrocarbyl) but not for H₂NB(NAr'CH)₂ because the increased strength of the new Ti-N_im bond for the former is outweighed by the increased net H-N bond strengths in the borylamine. Variation of the Ti-N_im bond length over short distances is dominated by π-interactions with any appropriate orbital on the N_im atom organic substituent. However, over the full range of imides and hydrazides studied, overall bond energies do not correlate with bond length but with the Ti-N_im σ-bond character and the orthogonal π-interaction.

Metathesis of a UV imido complex: a route to a terminal UV sulfide

The metathesis reaction of a U^V imido complex supported by sterically demanding tris(tert-butoxy)siloxide ligands with CS₂ afforded a terminal U^V thiocarbonate but metathesis with H₂S afforded the first example of a terminal U^V sulfide.

Herein, we report the synthesis and characterisation of the first terminal uranium(v) sulfide and a related U^V trithiocarbonate complex supported by sterically demanding tris(tert-butoxy)siloxide ligands. The reaction of the potassium-bound U^V imido complex, [U(NAd){OSi(OtBu)₃}₄K] (4), with CS₂ led to the isolation of perthiodicarbonate [K(18c6)]₂[C₂S₆] (6), with concomitant formation of the U^IV complex, [U{OSi(OtBu)₃}₄], and S Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CNAd. In contrast, the reaction of the U^V imido complex, [K(2.2.2-cryptand)][U(NAd){OSi(OtBu)₃}₄] (5), with one or two equivalents of CS₂ afforded the trithiocarbonate complex, [K(2.2.2-cryptand)][U(CS₃){OSi(OtBu)₃}₄] (7), which was isolated in 57% yield, with concomitant elimination of the admantyl thiocyanate product, SCNAd. Complex 7 is likely formed by fast nucleophilic addition of a U^V terminal sulfide intermediate, resulting from the slow metathesis reaction of the imido complex with CS₂, to a second CS₂ molecule. The addition of a solution of H₂S in thf (1.3 eq.) to 4 afforded the first isolable U^V terminal sulfide complex, [K(2.2.2-cryptand)][US{OSi(OtBu)₃}₄] (8), in 41% yield. Based on DFT calculations, triple-bond character with a strong covalent interaction is suggested for the U–S bond in complex 7.

Redox non-innocence permits catalytic nitrene carbonylation by (dadi)Ti[double bond, length as m-dash]NAd (Ad = adamantyl)

Application of the diamide, diimine {-CH[double bond, length as m-dash]N(1,2-C6H4)N(2,6-iPr2-C6H3)}2 m ((dadi) m ) ligand to titanium provided adducts (dadi)TiL x (1-L x ; L x = THF, PMe2Ph, (CNMe)2), which possess the redox formulation [(dadi)4-]Ti(iv)L x , and 22 πe- (4n + 2). Related complexes containing titanium-ligand multiple bonds, (dadi)Ti[double bond, length as m-dash]X (2 [double bond, length as m-dash]X; X = O, NAd), exhibit a different dadi redox state, [(dadi)2-]Ti(iv)X, consistent with 20 πe- (4n). The Redox Non-Innocence (RNI) displayed by dadi m impedes binding by CO, and permits catalytic conversion of AdN3 + CO to AdNCO + N2. Kinetics measurements support carbonylation of 2 [double bond, length as m-dash]NAd as the rate determining step. Structural and computational evidence for the observed RNI is provided.

Unusual κ1 coordination of a β-diketiminate ligand in niobium complexes

Reaction of (BDI)Nb(N(t)Bu)Cl2py with NaCp results in the κ(1)-coordination of the BDI ligand in the complex (κ(1)-N,BDI)CpNb(N(t)Bu)Cl (2). Via chloride abstraction from 2, we develop synthetic routes to structurally analogous cationic and Nb(IV) pseudo-four coordinate complexes where the BDI ligand returns to the κ(2)-coordination mode. We compare these to our previously reported tetrahedral niobium bis(imido) complexes to investigate the effects of the Cp ligand on the properties of Nb-BDI-imido systems. Substitution of the chloride in 2 with a hydride also causes return to bidentate binding of the BDI ligand. The X-ray crystal structures of these complexes have been determined, and the structural parameters reflecting the consequences of the electronic differences are discussed.

Steric control of redox events in organo-uranium chemistry: synthesis and characterisation of U(v) oxo and nitrido complexes

Controlling the steric environment in U(η⁸-C₈H₆(1,4-SiR₃)₂)(η⁵-Cp*)] enables selective formation of either mononuclear U(v) or dinuclear U(iv) oxo and nitrido complexes.

The synthesis and molecular structures of a U(v) neutral terminal oxo complex and a U(v) sodium uranium nitride contact ion pair are described. The synthesis of the former is achieved by the use of ^tBuNCO as a mild oxygen transfer reagent, whilst that of the latter is via the reduction of NaN₃. Both mono-uranium complexes are stabilised by the presence of bulky silyl substituents on the ligand framework that facilitate a 2e^– oxidation of a single U(iii) centre. In contrast, when steric hindrance around the metal centre is reduced by the use of less bulky silyl groups, the products are di-uranium, U(iv) bridging oxo and (anionic) nitride complexes, resulting from 1e^– oxidations of two U(iii) centres. SQUID magnetometry supports the formal oxidation states of the reported complexes. Electrochemical studies show that the U(v) terminal oxo complex can be reduced and the [U(iv)O]^– anion was accessed via reduction with K/Hg, and structurally characterised. Both the nitride complexes display complex electrochemical behaviour but each exhibits a quasi-reversible oxidation at ca. –1.6 V vs. Fc^+/0.

Metallo-Wittig chemistry of an alkylidene to form a terminal titanium oxo complex

The synthesis and characterization of a terminal titanium oxo complex generated by alkylidene benzophenone cross-metathesis is reported.

Small molecule activation by mixed methyl/methylidene rare earth metal complexes

Diverse reactivity patterns of mixed tetramethyl/methylidene rare-earth complexes bearing bulky benzamidinate coligands with PhCN, alkynes, and CS₂ have been established and fully characterized.

Reactions of heteroallenes with cyclam-based Zr(IV) complexes

This work describes reactions of heteroallenes with diamido-diamine cyclam-based Zr(iv) complexes of the general formula (Bn2Cyclam)ZrX2 (X = O(t)Bu, , O(i)Pr, , SPh, , NH(t)Bu, ) as well as the di-orthometallated species ((C6H4CH2)2Cyclam)Zr, . The reactions of isocyanates or isothiocyanates with , or resulted in the formation of N-bonded ureate or thioureate cyclam complexes upon [2 + 2] cycloaddition of the Zr-Namido bonds of the cyclam to the heteroallene (). DFT calculations showed that κ(2)-N,N'-ureate bonding is favoured over κ(2)-N,O-ureates, which in turn may be formed in reactions with bulky isocyanates as 1-naphthyl isocyanate (NpN[double bond, length as m-dash]C[double bond, length as m-dash]O). The reactions of with N,N'-cyclohexylcarbodiimide (CyN[double bond, length as m-dash]C[double bond, length as m-dash]NCy) and carbon disulfide afforded guanidinate and dithiocarbamate fragments, respectively, appended to one of the nitrogen atoms of the cyclam ligand. These reactions represent a reliable method for the synthesis of asymmetrically N-functionalized cyclams giving rise to C1 symmetry Zr(iv) species by addition of one equivalent of heteroallenes. The reaction of (Bn2Cyclam)Zr(NH(t)Bu)2, , with one equivalent of mesityl isocyanate (MesN[double bond, length as m-dash]C[double bond, length as m-dash]O) also proceeds through insertion, involving one Zr-NH(t)Bu bond. However, it was observed that the reaction of (Bn2Cyclam)Zr(NH(t)Bu)2, , with MesN[double bond, length as m-dash]C[double bond, length as m-dash]O follows a different path if the reaction is carried out at 60 °C. In this case the reaction leads to [2 + 2] addition of the Zr-Ncyclam bond to the isocyanate, with a concomitant occurrence of orthometallation of the one benzyl pending group of the cyclam ring. The reaction of (t)BuN[double bond, length as m-dash]C[double bond, length as m-dash]O with the di-orthometallated complex ((C6H4CH2)2Cyclam)Zr, , also gave a κ(2)-N,N'-ureate fragment, by isocyanate addition to the macrocycle. DFT calculations on these systems were conducted in an attempt to rationalise the reactivity patterns observed.

Metal-catalyzed "on-demand" production of carbonyl sulfide from carbon monoxide and elemental sulfur

The group 6 molybdenum(II) cyclopentadienyl amidinate (CPAM) bis(carbonyl) complex [Cp*Mo{N(iPr)C(Ph)N(iPr)}(CO)2] (Cp*=η(5)-C5Me5) serves as a precatalyst for the high-yielding photocatalytic production of COS from CO and S8 under near-ambient conditions (e.g., 10 psi, 25 °C). Further documented is the isolation and structural characterization of several key transition-metal intermediates which collectively support a novel molybdenum(IV)-based catalytic cycle as being operative. Finally, in the presence of an excess amount of a primary amine, it is demonstrated that this catalytic system can be successfully used for the "on-demand" generation and utilization of COS as a chemical reagent for the synthesis of ureas.

Cyclic tetramers of a five-membered palladacycle based on a head-to-tail-linked isocyanate dimer and their reactivity in cyclotrimerization of isocyanates

Cyclic tetramers of a five-membered palladacycle involving an isocyanate dimer were prepared, and catalytic cyclotrimerization from a palladium zero-compound or a single palladacycle with organic isocyanates was performed.

A computationally designed titanium-mediated amination of allylic alcohols for the synthesis of secondary allylamines

A direct amination on allylic alcohols under mild conditions was enlightened by computational investigations and implemented in secondary allylamines synthesis.

Titanium imido complexes stabilised by bis(iminophosphoranyl)methanide ligands: the influence of N-substituents on solution dynamics and reactivity

The synthesis, structural study and assessment in catalytic hydroamination of Ti imido complexes with bis(iminophosphoranyl)methanide ligands are reported.