A Versatile Cuprous Synthon: [Cu(IPr)(OH)] (IPr = 1,3 bis(diisopropylphenyl)imidazol-2-ylidene)

Synthesis, Structures, and Reactivity of Organostannanides and Organogermanides of Copper(I)

Organogermane and organostannane compounds are valuable reagents in cross coupling reactions, and copper(I) germanide and stannanide complexes can provide convenient access to these compounds. This review presents the chemistry of copper(I) germanide and stannanide complexes, with a particular focus on systems at the frontier of organic and inorganic chemistry where structural characterisation of coordination complexes facilitates rationalisation of organic mechanisms. These species show both similarities to, and significant divergences from their lighter silanide congeners. For example, they are all viable sources of the relevant organotetranide anion, but in the cases of both germanium and tin, the tetranides can be accessed via direct deprotonation of the corresponding tetranes, a reaction unknown for silicon. Further divergences between copper(I) germanides and stannanides are highlighted; whilst both can be used in productive organic transformations to access organotetranes, catalytic reactions are only reported for germanium. The rather striking ability of triphenylstannanides to acts as sources of the phenyl anion are discussed; the mechanism of this reaction is still subject to discussion, but its absence in the chemistry of germanium and silicon is now well-rationalised. We conclude this review by considering potential research directions in the synthesis and exploitation of copper(I) germanides and stannanides.

π-Bonding of Group 11 Metals to a Tantalum Alkylidyne Alkyl Complex Promotes Unusual Tautomerism to Bis-alkylidene and CO2 to Ketenyl Transformation

A salt metathesis synthetic strategy is used to access rare tantalum/coinage metal (Cu, Ag, Au) heterobimetallic complexes. Specifically, complex [Li(THF)2][Ta(CtBu)(CH2tBu)3], 1, reacts with (IPr)MCl (M = Cu, Ag, Au, IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) to afford the alkylidyne-bridged species [Ta(CH2tBu)3(μ-CtBu)M(IPr)] 2-M. Interestingly, π-bonding of group 11 metals to the Ta─C moiety promotes a rare alkylidyne alkyl to bis-alkylidene tautomerism, in which compounds 2-M are in equilibrium with [Ta(CHtBu)(CH2tBu)2(μ-CHtBu)M(IPr)] 3-M. This equilibrium was studied in detail using NMR spectroscopy and computational studies. This reveals that the equilibrium position is strongly dependent on the nature of the coinage metal going down the group 11 triad, thus offering a new valuable avenue for controlling this phenomenon. Furthermore, we show that these uncommon bimetallic couples could open attractive opportunities for synergistic reactivity. We notably report an uncommon deoxygenative carbyne transfer to CO2 resulting in rare examples of coinage metal ketenyl species, (tBuCCO)M(IPr), 4-M (M = Cu, Ag, Au). In the case of the Ta/Li analogue 1, the bis(alkylidene) tautomer is not detected, and the reaction with CO2 does not cleanly yield ketenyl species, which highlights the pivotal role played by the coinage metal partner in controlling these unconventional reactions.

Dial-a-base mechanochemical synthesis of N-heterocyclic carbene copper complexes

Liquid assisted ball milling of [NHC]HBr (NHC = N-heterocyclic carbene) salts with copper(I) chloride, and a range of alkali metal complexes was shown to efficiently produce (NHC)CuX (NHC = normal or RE-NHC, X = halide, alkoxide, amide, alkyl, aryl; RE-NHC = ring-expanded NHC).

A mesoionic carbene stabilized nickel(II) hydroxide complex: a facile precursor for C-H activation chemistry

We report the synthesis of a new nickel(II) hydroxide complex 2 supported by a rigid, tridentate triazolylidene-carbazolid ligand. The complex can be accessed in high yields following a simple and stepwise extraction protocol using dichloromethane and aqueous ammonium chloride followed by aqeous sodium hydroxide solution. We found that complex 2 is highly basic, undergoing various deprotonation/desilylation reactions with E-H and C-H acidic and silylated compounds. In this context we synthesized a variety of novel, functionalized nickel(II) complexes with trimethylsilylolate (3), trityl sulfide (4), tosyl amide (5), azido (6), pyridine (7), acetylide (8, 9), fluoroarene (10 & 11) and enolate (12) ligands. We furthermore found that 2 reacts with malonic acid dimethyl ester in a knoevennagel-type condensation reaction, giving access to a new enolate ligand in complex 13, consisting of two malonic acid units. Furthermore, complex 2 reacts with acetonitrile to form the cyanido complex 14. The formation of complexes 13 and 14 is particularly interesting, as they underline the potential of complex 2 in both C-C bond formation and cleavage reactions.

Heteroleptic Silver(I) and Gold(I) N-Heterocyclic Carbene Complexes: Structural Characterization, Computational Analysis, Tyrosinase Inhibitory, and Biological Effects

Derivatization of (NHC)M-Cl (M = Ag, Au) with selected sulfur donors from the family of dialkyldithiophosphates and bis(2-mercapto-1-methylimidazolyl)borate ligands gave a series of heteroleptic mononuclear complexes. In single-crystal X-ray diffraction analysis, Ag(I) complexes adopted a trigonal planar geometry, while Au(I) complexes are near-linear. TD-DFT and hole-electron analyses of the selected complexes gave insight into the electronic features of the metal complexes. In vitro cellular tests were conducted on the human cancerous breast cell line MCF-7 using 2 and 8. The antibacterial activities of complexes 1, 2, 3, 7, 8, and IPr-Ag-Cl were also screened against Gram-positive (Staphylococcus aureus PTCC 1112) and Gram-negative (Escherichia coli PTCC 1330) bacteria. Antityrosinase and hemolytic effects of the selected compounds were also determined.

Copper-Phosphido Catalysis: Enantioselective Addition of Phosphines to Cyclopropenes

We describe a copper catalyst that promotes the addition of phosphines to cyclopropenes at ambient temperature. A range of cyclopropylphosphines bearing different steric and electronic properties can now be accessed in high yields and enantioselectivities. Enrichment of phosphorus stereocenters is also demonstrated via a Dynamic Kinetic Asymmetric Transformation (DyKAT) process. A combined experimental and theoretical mechanistic study supports an elementary step featuring insertion of a CuI -phosphido into a carbon-carbon double bond. Density functional theory calculations reveal migratory insertion as the rate- and stereo-determining step, followed by a syn-protodemetalation.

Polymorphs and solid solutions: materials with new luminescent properties obtained through mechanochemical transformation of dicyanoaurate(I) salts

We report the use of mechano- and thermochemical methods to create new solid-state luminescent materials from well-known inorganic salts, potassium dicyanoaurate(I) KAu(CN)₂, and potassium dicyanocuprate(I) KCu(CN)₂. In particular, manual grinding or ball milling of commercial samples of KAu(CN)₂ led to the formation of a novel polymorph of the salt, herein termed m-KAu(CN)₂, evident by a significant change in color of the fluorescence emission of the solid material from orange to violet. The formation of m-KAu(CN)₂ is reversible upon addition of small amounts of solvents, and powder X-ray diffraction analysis indicates that the structure of m-KAu(CN)₂ might be related to that of pristine KAu(CN)₂ through a change in ordering of Au(CN)₂^- ions in a layered structure. Thermal treatment of KAu(CN)₂ led to the discovery of another polymorph of this well-known salt, herein termed t-KAu(CN)₂, making KAu(CN)₂ a rare example of a system in which thermochemical and mechanochemical treatments lead to the formation of different, in each case previously not reported, polymorphic forms. The thermally-induced transformation from KAu(CN)₂ to t-KAu(CN)₂ takes place around 250 °C and proceeds in a crystal-to-crystal fashion, which enabled the preliminary structural characterisation through single crystal X-ray diffraction, revealing the retention of the layered structure and a change in ordering of Au(CN)₂^- ions. Milling of the simple salt KAu(CN)₂ in the presence of equimolar amounts or less of its copper(I)-based analogue coordination polymer KCu(CN)₂ leads to the formation of a series of solid solution materials, isostructural to m-KAu(CN)₂ and with visible fluorescence emission distinct from KCu(CN)₂ or any herein investigated forms of KAu(CN)₂.

Reactivity and Stability of a Ring-Expanded N-Heterocyclic Carbene Copper(I) Boryl Imidinate

Frustrated Lewis pairs (FLPs) have evolved from a revolutionary concept to widely applied catalysts. We recently reported the ring-expanded N-heterocyclic carbene supported copper(I) boryliminomethanide, (6-Dipp)CuC(=NtBu)Bpin and noted it reacted with heterocumulenes in a fashion reminiscent of FLPs. We thus set out to explore its reactivity with a range of other substrates known to react with FLPs. This was undertaken by a series of synthetic studies using NMR spectroscopy, mass spectrometry, IR spectroscopy, and single crystal X-ray crystallography. (6-Dipp)CuC(=NtBu)Bpin was investigated for its reactivity towards water, hydrogen, and phenylacetylene. Its solution stability was also explored. Upon heating, (6-Dipp)CuC(=NtBu)Bpin decomposed to (6-Dipp)CuCN, which was characterised by SC-XRD and NMR spectroscopy, and pinBtBu. Although no reaction was observed with hydrogen, (6-Dipp)CuC(=NtBu)Bpin reacted with water to form (6-Dipp)CuC(=N(H)tBu)B(OH)pin, which was structurally characterised. In contrast to its FLP-reminiscent heterolytic cleavage reactivity towards water, (6-Dipp)CuC(=NtBu)Bpin acted as a Brønsted base towards phenyl acetylene generating (6-Dipp)CuCCPh, which was characterised by SC-XRD, IR, and NMR spectroscopy, and HC(=NtBu)Bpin

Copper(I)-Catalyzed Asymmetric Synthesis of P-Chiral Aminophosphinites

Herein, a copper(I)-catalyzed reaction of diarylphosphines and O-benzoyl hydroxylamines is developed. In the cases of symmetrical diarylphosphines, a series of aminophosphinites is prepared in high yields. In the cases of unsymmetrical diarylphosphines, an array of P-chiral aminophosphinites is synthesized in high yields with high enantioselectivity by using a copper(I)-(R,R_P )-Ph-FOXAP complex as a chiral catalyst. Based on several control experiments and ³¹ P NMR studies, a two-electron redox mechanism involving the dynamic kinetic asymmetric transformation of unsymmetrical diarylphosphines is proposed for the copper(I)-catalyzed asymmetric reaction. Finally, one representative P-chiral phosphoric amide generated through the oxidation with H₂ O₂ is transformed to a chiral diarylphosphinate in high yield with retained enantioselectivity, which allows further transformations towards various P-chiral tertiary phosphines.

Pd/Cu bimetallic catalysis to access highly fluorinated biaryls from aryl halides and fluorinated arenes

An efficient Pd/Cu bimetallic cross-coupling catalysis of fluoroaryl halides and fluoroarenes is reported. In situ generation of the Cu nucleophile by rate determining C-H activation of highly fluorinated aryls (≥4 F atoms) leads to high cross-coupling selectivity with little formation of homocoupling products.

Straightforward synthesis of [Cu(NHC)(alkynyl)] and [Cu(NHC)(thiolato)] complexes (NHC = N-heterocyclic carbene)

Synthetic access to monomeric copper-alkynyl and copper-thiolato complexes of the type [(NHC)Cu(R)] (R = alkynyl or thiolato) using a weak base approach is reported. All reported reactions proceed under mild conditions in air and in environmentally acceptable solvents. The novel complexes are fully characterized and single crystal X-ray analyses unambiguously establish the atom connectivity in these mononuclear complexes. The importance of the supporting NHC ligand's steric properties in stabilizing mononuclear complexes is discussed.

Efficient electrocatalytic acetylene semihydrogenation by electron-rich metal sites in N-heterocyclic carbene metal complexes

Electrocatalytic acetylene semihydrogenation is a promising alternative to thermocatalytic acetylene hydrogenation due to its environmental benignity and economic efficiency, but its performance is far below that of the thermocatalytic reaction because of strong competition from side reactions, including hydrogen evolution, overhydrogenation and carbon-carbon coupling reactions. We develop N-heterocyclic carbene-metal complexes, with electron-rich metal centers owing to the strongly σ-donating N-heterocyclic carbene ligands, as electrocatalysts for selective acetylene semihydrogenation. Experimental and theoretical investigations reveal that the copper sites in N-heterocyclic carbene-copper facilitate the absorption of electrophilic acetylene and the desorption of nucleophilic ethylene, ultimately suppressing the side reactions during electrocatalytic acetylene semihydrogenation, and exhibit superior semihydrogenation performance, with faradaic efficiencies of ≥98 % under pure acetylene flow. Even in a crude ethylene feed containing 1 % acetylene (1 × 104 ppm), N-heterocyclic carbene-copper affords a specific selectivity of >99 % during a 100-h stability test, continuous ethylene production with only ~30 ppm acetylene, a large space velocity of up to 9.6 × 105 mL·gcat-1·h-1, and a turnover frequency of 2.1 × 10-2 s-1, dramatically outperforming currently reported thermocatalysts.

Using Postsynthetic X-Type Ligand Exchange to Enhance CO2 Adsorption in Metal-Organic Frameworks with Kuratowski-Type Building Units

Postsynthetic modification methods have emerged as indispensable tools for tuning the properties and reactivity of metal-organic frameworks (MOFs). In particular, postsynthetic X-type ligand exchange (PXLE) at metal building units has gained increasing attention as a means of immobilizing guest species, modulating the reactivity of framework metal ions, and introducing new functional groups. The reaction of a Zn-OH functionalized analogue of CFA-1 (1-OH, Zn(ZnOH)₄(bibta)₃, where bibta^2- = 5,5'-bibenzotriazolate) with organic substrates containing mildly acidic E-H groups (E = C, O, N) results in the formation of Zn-E species and water as a byproduct. This Brønsted acid-base PXLE reaction is compatible with substrates with pK_a(DMSO) values as high as 30 and offers a rapid and convenient means of introducing new functional groups at Kuratwoski-type metal nodes. Gas adsorption and diffuse reflectance infrared Fourier transform spectroscopy experiments reveal that the anilide-exchanged MOFs 1-NHPh_0.9 and 1-NHPh_2.5 exhibit enhanced low-pressure CO₂ adsorption compared to 1-OH as a result of a Zn-NHPh + CO₂ ⇌ Zn-O₂CNHPh chemisorption mechanism. The MFU-4l analogue 2-NHPh ([Zn₅(OH)_2.1(NHPh)_1.9(btdd)₃], where btdd^2- = bis(1,2,3-triazolo)dibenzodioxin), shows a similar improvement in CO₂ adsorption in comparison to the parent MOF containing only Zn-OH groups.

Copper(I)-Catalyzed Asymmetric Alkylation of Unsymmetrical Secondary Phosphines

A copper(I)-catalyzed asymmetric alkylation of HPAr¹Ar² with alkyl halides is uncovered, which provides an array of P-stereogenic phosphines in generally high yield and enantioselectivity. The electrophilic alkyl halides enjoy a broad substrate scope, including allyl bromides, propargyl bromide, benzyl bromides, and alkyl iodides. Moreover, 11 unsymmetrical diarylphosphines (HPAr¹Ar²) serve as competent pronucleophiles. The present methodology is also successfully applied to catalytic asymmetric double and triple alkylation, and the corresponding products were obtained in moderate diastereo- and excellent enantioselectivities. Some ³¹P NMR experiments indicate that bulky HPPhMes exhibits weak competitively coordinating ability to the Cu(I)-bisphosphine complex, and thus the presence of stoichiometric HPAr¹Ar² does not affect the enantioselectivity significantly. Therefore, the high enantioselectivity in this reaction is attributed to the high performance of the unique Cu(I)-(R,R_P)-TANIAPHOS complex in asymmetric induction. Finally, one monophosphine and two bisphosphines prepared by the present reaction are employed as efficient chiral ligands to afford three structurally diversified Cu(I) complexes, which demonstrates the synthetic utility of the present methodology.

A bench-stable copper photocatalyst for the rapid hydrophosphination of activated and unactivated alkenes

Cu(acac)₂ (1) is a highly active catalyst for the hydrophosphination of alkenes. Photocatalytic conditions are critical, and provide high conversions with unactivated substrates that have never before been reported with an air-stable catalyst or at ambient temperature. The commercial availability, ease of use, and broad substrate scope of compound 1 make hydrophosphination more available to synthetic chemists.

Catalytic Asymmetric Synthesis of P-Stereogenic Phosphines: Beyond Precious Metals

Metal-catalyzed asymmetric synthesis of P-stereogenic phosphines is a potentially useful approach to a class of chiral ligands with valuable applications in asymmetric catalysis. We introduced this idea with chiral platinum and palladium catalysts, exploiting rapid pyramidal inversion in diastereomeric metal–phosphido complexes (ML*(PRR′)) to control phosphorus stereochemistry. This Account summarizes our attempts to develop related synthetic methods using earth-abundant metals, especially copper, in which weaker metal–ligand bonds and faster substitution processes were expected to result in more active catalysts. Indeed, precious metals were not required. Without any transition metals at all, we exploited related P-epimerization processes to prepare enantiomerically pure phosphiranes and secondary phosphine oxides (SPOs) from commercially available chiral epoxides.

1 Introduction

2 Copper-Catalyzed Phosphine Alkylation

3 Copper-Catalyzed Tandem Phosphine Alkylation/Arylation

4 Nickel-Catalyzed Phosphine Alkylation

5 Proton-Mediated P-Epimerization in Synthesis of Chiral Phosphiranes

6 Diastereoselective Synthesis of P-Stereogenic Secondary Phosphine Oxides (SPOs) from (+)-Limonene Oxide

7 Conclusions

Catch It If You Can: Copper-Catalyzed (Transfer) Hydrogenation Reactions and Coupling Reactions by Intercepting Reactive Intermediates Thereof

The key reactive intermediate of copper(I)-catalyzed alkyne semihydrogenations is a vinylcopper(I) complex. This intermediate can be exploited as a starting point for a variety of trapping reactions. In this manner, an alkyne semihydrogenation can be turned into a dihydrogen­-mediated coupling reaction. Therefore, the development of copper-catalyzed (transfer) hydrogenation reactions is closely intertwined with the corresponding reductive trapping reactions. This short review highlights and conceptualizes the results in this area so far, with H2-mediated carbon–carbon and carbon–heteroatom bond-forming reactions emerging under both a transfer hydrogenation setting as well as with the direct use of H2. In all cases, highly selective catalysts are required that give rise to atom-economic multicomponent coupling reactions with rapidly rising molecular complexity. The coupling reactions are put into perspective by presenting the corresponding (transfer) hydrogenation processes first.

1 Introduction: H2-Mediated C–C Bond-Forming Reactions

2 Accessing Copper(I) Hydride Complexes as Key Reagents for Coupling Reactions; Requirements for Successful Trapping Reactions

3 Homogeneous Copper-Catalyzed Transfer Hydrogenations

4 Trapping of Reactive Intermediates of Alkyne Transfer Semi­hydrogenation Reactions: First Steps Towards Hydrogenative Alkyne Functionalizations

5 Copper(I)-Catalyzed Alkyne Semihydrogenations

6 Copper(I)-Catalyzed H2-Mediated Alkyne Functionalizations; Trapping of Reactive Intermediates from Catalytic Hydrogenations

6.1 A Detour: Copper(I)-Catalyzed Allylic Reductions, Catalytic Generation of Hydride Nucleophiles from H2

6.2 Trapping with Allylic Electrophiles: A Copper(I)-Catalyzed Hydro­allylation Reaction of Alkynes

6.3 Trapping with Aryl Iodides

7 Conclusion

Mononuclear Cu Complexes Based on Nitrogen Heterocyclic Carbene: A Comprehensive Review

During the last decade, organometallic, coordination, and catalytic chemistry of the three-dimensional metals such as copper (Cu) has been greatly affected by the emergence of nitrogen heterocyclic carbene (NHC) complexes. The NHCs, and in particular the mononuclear Cu^I-based ones, have been proven vastly useful in several applications such as in biosynthesis, catalysis, photochemistry, etc. This review tries to thoroughly describe a series of mononuclear Cu^I NHC complexes and their subcategories such as heteroleptics, and bidentate and tridentate heteroatom complexes, and give some detailed insights on their development, emergence, and applications. A brief outlook is also disclosed to enable other researchers to further develop a platform for future advances and studies in the field of Cu^I-based NHCs.

Aerobic synthesis of N-sulfonylamidines mediated by N-heterocyclic carbene copper(I) catalysts

A new catalytic strategy for the one-pot synthesis of N-sulfonylamidines is described. The cationic copper(I) complexes were found to be highly active and efficient under mild conditions in air and in the absence of solvent. A copper acetylide is proposed as key intermediate in this transformation.

Detection of stress in polymers: mechanochemical activation of CuAAC click reactions in poly(urethane) networks

We report on copper(i)-bis(N-heterocyclic carbene)s (NHC) for quantitative stress-sensing, embedded within polyurethane networks, triggering a fluorogenic copper(i) azide alkyne cycloaddition (CuAAC) of 8-azido-2-naphtol and 3-hydroxy phenylacetylene. A completely transparent, force responsive poly(urethane) material is generated, allowing a quantification of the applied stress.

The first ring-expanded NHC–copper(i) phosphides as catalysts in the highly selective hydrophosphination of isocyanates

The first copper(i) phosphides supported by ring-expanded N-heterocyclic carbenes have been synthesised and react readily with heterocumulenes. These copper(i) phosphides are highly active and selective in the hydrophosphination of isocyanates.

N-Heterocyclic Carbene Complexes of Copper, Nickel, and Cobalt

The emergence of N-heterocyclic carbenes as ligands across the Periodic Table had an impact on various aspects of the coordination, organometallic, and catalytic chemistry of the 3d metals, including Cu, Ni, and Co, both from the fundamental viewpoint but also in applications, including catalysis, photophysics, bioorganometallic chemistry, materials, etc. In this review, the emergence, development, and state of the art in these three areas are described in detail.

Cu–NHC azide complex: synthesis and reactivity

The first example of a NHC-based copper azide complex is reported. Its reactivity was investigated with various reagents affording 8 new complexes.

Taming the Cationic Beast: Novel Developments in the Synthesis and Application of Weakly Coordinating Anions

This Review gives a comprehensive overview of the most topical weakly coordinating anions (WCAs) and contains information on WCA design, stability, and applications. As an update to the 2004 review, developments in common classes of WCA are included. Methods for the incorporation of WCAs into a given system are discussed and advice given on how to best choose a method for the introduction of a particular WCA. A series of starting materials for a large number of WCA precursors and references are tabulated as a useful resource when looking for procedures to prepare WCAs. Furthermore, a collection of scales that allow the performance of a WCA, or its underlying Lewis acid, to be judged is collated with some advice on how to use them. The examples chosen to illustrate WCA developments are taken from a broad selection of topics where WCAs play a role. In addition a section focusing on transition metal and catalysis applications as well as supporting electrolytes is also included.

Determination of the Cu(III)-OH Bond Distance by Resonance Raman Spectroscopy Using a Normalized Version of Badger's Rule

The stretching frequency, ν(Cu-O), of the [CuOH]2+ core in the complexes LCuOH (L = N,N'-bis(2,6-diisopropyl-4-R-phenyl)pyridine-2,6-dicarboxamide, R = H or NO2, or N,N'-bis(2,6-diisopropylphenyl)-1-methylpiperidine-2,6-dicarboxamide) was determined to be ∼630 cm-1 by resonance Raman spectroscopy and verified by isotopic labeling. In efforts to use Badger's rule to estimate the bond distance corresponding to ν(Cu-O), a modified version of the rule was developed through use of stretching frequencies normalized by dividing by the appropriate reduced masses. The modified version was found to yield excellent fits of normalized frequencies to bond distances for >250 data points from theory and experiment for a variety of M-X and X-X bond distances in the range ∼1.1-2.2 Å (root mean squared errors for the predicted bond distances of 0.03 Å). Using the resulting general equation, the Cu-O bond distance was predicted to be ∼1.80 Å for the reactive [CuOH]2+ core. Limitations of the equation and its use in predictions of distances in a variety of moieties for which structural information is not available were explored.

Syntheses of transition metal methoxysiloxides

The paper describes three methods for the preparation of methoxysiloxide complexes, a rare class of complexes of relevance to room temperature vulcanization (RTV) of polysiloxanes.

Copper(i)-catalysed transfer hydrogenations with ammonia borane

Highly Z-selective alkyne transfer semihydrogenations and conjugate transfer hydrogenations of enoates can be effected by employing a readily available copper(i)/N-heterocyclic carbene (NHC) complex, [IPrCuOH], in combination with ammonia borane as a H₂ equivalent.