o-Diarylphosphinoferrocene Sulfonate Palladium Systems for Nonalternating Ethene–Carbon Monoxide Copolymerization

Development of novel organometallic sulfonamides with N-ethyl or N-methyl benzenesulfonamide units as potential human carbonic anhydrase I, II, IX and XII isoforms' inhibitors: Synthesis, biological evaluation and docking studies

In the search of new cymantrenyl- and ferrocenyl-sulfonamides as potencial inhibitors of human carbonic anhydrases (hCAs), four compounds based on N-ethyl or N-methyl benzenesulfonamide units have been obtained. These cymantrenyl (1a-b) and ferrocenyl (2a-b) derivatives were prepared by the reaction between aminobenzene sulfonamides ([NH2-(CH2)n-(C6H4)-SO2-NH2)], where n = 1, 2) with cymantrenyl sulfonyl chloride (P1) or ferrocenyl sulfonyl chloride (P2), respectively. All compounds were characterized by conventional spectroscopic techniques and cyclic voltammetry. In the solid state, the molecular structures of compounds 1a, 1b, and 2b were determined by single-crystal X-ray diffraction. Biological evaluation as carbonic anhydrases inhibitors were carried out and showed derivatives 1b y 2b present a higher inhibition than the drug control for the Human Carbonic Anhydrase (hCA) II and IX isoforms (KI = 7.3 nM and 5.8 nM, respectively) and behave as selective inhibition for hCA II isoform. Finally, the docking studies confirmed they share the same binding site and interactions as the known inhibitors acetazolamide (AAZ) and agree with biological studies.

Control over Anion Coordination on Pd(II), Cu(I), and Ag(I) with Regioisomeric Phosphine-Carboxylate Ligands

The coordination of anionic donors is involved at various stages of catalytic cycles in transition-metal catalysis, but control over the spatial positioning of anions around a metal center is a challenge in coordination chemistry. Here we show that regioisomeric phosphine-carboxylate ligands provide spatial anion control on palladium(II) centers by favoring either κ2, cis-κ1, or trans-κ1 coordination of the carboxylate donor. Additionally, the palladium(II) carboxylates, which contain a methyl donor, upon protonation, deliver metal-alkyl complexes that feature a coordinated carboxylic acid. Such complexes can be considered as models for the minima that follow the concerted metalation-deprotonation transition state for C-H activation. The predictability of the coordination modes is further demonstrated on silver(I) and copper(I) centers, for which less common structures of mononuclear and dinuclear complexes can be obtained by using spatial anion control. Our results demonstrate the potential for spatial control over carboxylate anions in coordination chemistry.

Synthesis and catalytic properties of palladium(II) complexes with P,π-chelating ferrocene phosphinoallyl ligands and their non-tethered analogues

Hybrid phosphines usually combine a phosphine moiety with another heteroatom secondary donor group in their structures while compounds equipped with hydrocarbyl π-donor moieties remain uncommon. This contribution reports the synthesis and structural characterization of the first P/π-allyl-chelating complexes that were obtained using the structurally flexible and redox-active ferrocene unit as the scaffold, viz. [PdCl(R2PfcCHCHCH2-η3:κP)] (1R; R = Ph and cyclohexyl (Cy); fc = ferrocene-1,1'-diyl). These compounds were synthesized from the respective phosphinoferrocene carboxaldehydes R2PfcCHO via reaction with vinylmagnesium bromide to generate 1-(phosphinoferrocenyl)allyl alcohols, which were subsequently acetylated. The resulting allyl acetates reacted smoothly with [Pd2(dba)3]/[Et3NH]Cl (dba = dibenzylideneacetone) to produce the target compounds. Complexes 1R and their nontethered analogues [PdCl(η3-C3H5)(FcPR2-κP)] (5R; Fc = ferrocenyl) were evaluated as pre-catalysts for the Pd-catalysed allylic amination of cinnamyl acetate with aliphatic amines and Suzuki-Miyaura-type cross-coupling of 4-tolylboronic acid with benzoyl chloride. In these reactions, better results were achieved with compounds 5R (particularly with 5Ph), presumably because they form more stable LPd(0)-type catalysts.

Recent Advances in Synthesis of Non-Alternating Polyketone Generated by Copolymerization of Carbon Monoxide and Ethylene

The copolymers of carbon monoxide (CO) and ethylene, namely aliphatic polyketones (PKs), have attracted considerable attention due to their unique property and degradation. Based on the arrangement of the ethylene and carbonyl groups in the polymer chain, PKs can be divided into perfect alternating and non-perfect alternating copolymers. Perfect alternating PKs have been previously reviewed, we herein focus on recent advances in the synthesis of PKs without a perfect alternating structure including non-perfect alternating PKs and PE with in-chain ketones. The chain structure of PKs, catalytic copolymerization mechanism, and non-alternating polymerization catalysts including phosphine-sulfonate Pd, diphosphazane monoxide (PNPO) Pd/Ni, and phosphinophenolate Ni catalysts are comprehensively summarized. This review aims to enlighten the design of ethylene/CO non-alternating polymerization catalysts for the development of new polyketone materials.

Ferrocene-based nitroheterocyclic sulfonylhydrazones: design, synthesis, characterization and trypanocidal properties

A series of new ferrocenyl nitroheterocyclic sulfonylhydrazones (1a-4a and 1b-2b) were prepared by the reaction between formyl (R = H) or acetyl (R = CH3) nitroheterocyclic precursors [4/5-NO2(C5H2XCOR), where X = O, S)] and ferrocenyl tosyl hydrazine [(η5-C5H5)Fe(η5-C5H4SO2-NH-NH2)]. All compounds were characterized by conventional spectroscopic techniques. In the solid state, the molecular structures of compounds 1a, 2b, and 3a were determined by single-crystal X-ray diffraction. The compounds showed an E-configuration around the C=N moiety. Evaluation of trypanocidal activity, measured in vitro against the Trypanosoma cruzi and Trypanosoma brucei strains, indicated that all organometallic tosyl hydrazones displayed activity against both parasite species with a higher level of potency toward T. brucei than T. cruzi. Moreover, the biological evaluation showed that the 5-nitroheterocyclic derivatives were more efficient trypanocidal agents than their 4-nitroheterocyclic counterparts.

Mechanistic Insights into Ni(II)-Catalyzed Nonalternating Ethylene-Carbon Monoxide Copolymerization

Polyethylene materials with in-chain-incorporated keto groups were recently enabled by nonalternating copolymerization of ethylene with carbon monoxide in the presence of Ni(II) phosphinephenolate catalysts. We elucidate the mechanism of this long-sought-for reaction by a combined theoretical DFT study of catalytically active species and the experimental study of polymer microstructures formed in pressure-reactor copolymerizations with different catalysts. The pathway leading to the desired nonalternating incorporation proceeds via the cis/trans isomerization of an alkyl-olefin intermediate as the rate-determining step. The formation of alternating motifs is determined by the barrier for the opening of the six-membered C,O-chelate by ethylene binding as the decisive step. An η²-coordination of a P-bound aromatic moiety axially oriented to the metal center is a crucial feature of these Ni(II) catalysts, which also modulates the competition between the two pathways. The conformational constraints imposed in a 2',6'-dimethoxybiphenyl moiety overall result in a desirable combination of disfavoring ethylene coordination along the alternating incorporation pathway, which is primarily governed by electronics, while not overly penalizing the nonalternating chain growth, which is primarily governed by sterics.

Cationic P,O-Coordinated Nickel(II) Catalysts for Carbonylative Polymerization of Ethylene: Unexpected Productivity via Subtle Electronic Variation

Transition-metal-catalyzed copolymerization of ethylene with carbon monoxide affords polyketones materials with excellent mechanical strength, photodegradability, surface and barrier properties. Unlike the widely used and rather expensive Pd catalysts, Ni-catalyzed carbonylative polymerization is very difficult since the strong binding affinity of CO to Ni deactivates the highly electrophilic metal center easily. In this study, various cationic P,O-coordinated Ni complexes were synthesized using the electronic modulation strategy, and the catalyst with strong electron-donating substituents exhibits an excellent productivity of 10⁴  g polymer (g Ni)^-1 , which represents a rare discovery that a Ni complex could operate with such exceptional efficiency in comparison with Pd catalysts. Notably, those Ni catalysts were also efficient for terpolymerization of ethylene, propylene with CO for producing commercial polyketone materials with low melting temperatures and easy processibility.

Polyethylene materials with in-chain ketones from nonalternating catalytic copolymerization

[Figure: see text].

Ferrocenylmethylphosphanes and the Alpha Process for Methoxycarbonylation: The Original Story

The Lucite Alpha process is the predominant technology for the preparation of acrylics. This two-stage process involves the palladium-catalysed formation of methyl propanoate from ethene, CO, and methanol, followed by the oxidative formylation of methyl propanoate into methyl methacrylate. A range of bis-1,2-disubstituted aminomethylferrocenes has been prepared and characterised. These complexes serve as precursors to a variety of bulky ferrocenylmethyldiphosphanes that, in turn, function as ligands in the palladium-catalysed process. We describe the crystal structures of five ligand precursors and provide a rationale for their design. In situ catalyst testing on palladium complexes derived from ferrocenylphosphanes demonstrates that these are highly selective (>99.5%) catalysts for the formation of methyl propanoate from ethene, CO, and methanol and have turnover numbers exceeding 50,000. This article credits those researchers who worked on this project in the early days, who received little or no credit for their achievements and endeavours.

Synthesis of Nonalternating Polyketones Using Cationic Diphosphazane Monoxide-Palladium Complexes

Copolymerization of olefin with carbon monoxide has received considerable interest from both academia and industry, and the introduction of polar carbonyl group renders the resultant polyketones with excellent mechanical strength, crystallinity, photodegradability, hydrophilicity, surface, and barrier properties. However, most of the reported polyketones are difficult to be processed because of limited solubility in common solvents and high melting temperature (T_m ∼ 260 °C) resulting from the strictly alternative structure. Nonalternating copolymerization of ethylene with CO is a very promising method to circumvent the problem of processability of traditional perfectly alternating polyketone. In the contribution, the palladium coordinated diphosphazane monoxide substituted by strong electron-donating groups is discovered to be highly reactive for producing nonalternating polyketones, and up to 24.2% extra ethylene incorporation has lowered T_m values to 147 and 165 °C and further improved thermal stability (T_d ∼ 339 °C) of the resultant materials. Our data demonstrates that cationic palladium complexes can also exhibit excellent reactivity and an unprecedented nonalternating degree in this copolymerization.

Synthesis of Hydrophilic Phosphorus Ligands and Their Application in Aqueous-Phase Metal-Catalyzed Reactions

Transition metal-catalyzed reactions in aqueous media are experiencing a constant increase in interest. In homogenous catalysis the use of water as a solvent offers advantages in cost, safety, the possibility of two-phase catalysis and simplified separation strategies. In the life sciences, transition metal catalysis in aqueous systems enables the ligation or modification of biopolymers in buffer systems or even in their cellular environment. In biocatalysis, aqueous systems allow the simultaneous use of enzymes and transition metal catalysts in cascade reactions. The use of water-soluble phosphine ligands still represents the most reliable and popular strategy for transferring metal catalysts into the aqueous phase. This review summarizes the recent advancements in this field since 2009 and describes current synthetic strategies for the preparation of hydrophilic phosphines and phosphites. In addition, recent applications of transition metal catalysis in aqueous solvents using these hydrophilic ligands are presented.

Ferrocenyl palladacycles derived from unsymmetrical pincer-type ligands: evidence of Pd(0) nanoparticle generation during the Suzuki-Miyaura reaction and applications in the direct arylation of thiazoles and isoxazoles

A new family of ferrocenyl-palladacycle complexes Pd(L¹)Cl (Pd1) and Pd(L²)Cl (Pd2) were synthesized and characterized by UV-visible, IR, ESI-MS, and NMR spectral studies. The molecular structures of Pd1 and Pd2 were determined by X-ray crystallographic studies. Palladacycle catalyzed Suzuki-Miyaura cross-coupling reactions were investigated utilizing the derivatives of phenylboronic acids and substituted chlorobenzenes. Mechanistic investigation authenticated the generation of Pd(0) nanoparticles during the catalytic cycle and the nanoparticles were characterized by XPS, SEM and TEM analysis. Direct C-H arylation of thiazole and isoxazole derivatives employing these ferrocenyl-palladacycle complexes was examined. The reaction model for the arylation reaction implicating the in situ generation of Pd(0) nanoparticles was proposed.

Interception of intermediates in phosphine oxidation by mesityl nitrile-N-oxide using frustrated Lewis pairs

While phosphine oxidation by MesCNO is rapid, FLPs can be used to intercept 1,3-addition intermediates. These species react with tBuOK or [Bu₄N]F permitting the oxidation to proceed.

Palladacycles of sulfated and selenated Schiff bases of ferrocene-carboxaldehyde as catalysts for O-arylation and Suzuki–Miyaura coupling

Palladacycles of Schiff-bases having a ferrocene core catalyze O-arylation of ArBr and Suzuki–Miyaura coupling of ArBr/Cl with a yield up to 93%.

Carbonylation of ethene catalysed by Pd(II)-phosphine complexes

This review deals with olefin carbonylation catalysed by Pd(II)-phosphine complexes in protic solvents. In particular, the results obtained in the carbonylation with ethene are reviewed. After a short description of the basic concepts relevant to this catalysis, the review treats in greater details the influence of the bite angle, skeletal rigidity, electronic and steric bulk properties of the ligand on the formation of the products, which range from high molecular weight perfectly alternating polyketones to methyl propanoate. It is shown that the steric bulk plays a major role in directing the selectivity. Particular emphasis is given to the factors governing the very active and selective catalysis to methyl propanoate, including the mechanism of the catalytic cycles with diphosphine- and monophosphine-catalysts. A brief note on the synthesis of methyl propanoate using a “Lucite” type catalyst in ionic liquids is also illustrated. A chapter is dedicated to the carbonylation of olefins in aqueous reaction media. The nonalternating CO-ethene copolymerization is also treated.

High temperature ethylene polymerization catalyzed by titanium(IV) complexes with tetradentate aminophenolate ligands in cis-O, N, N chelating mode

A series of titanium trichloride complexes , ligated with claw-type tetradentate aminophenolate ligands were synthesized from the direct reaction of TiCl4(THF)2 with 1 equiv. of the corresponding aminophenol in the presence of triethylamine. For comparison purposes, titanium isopropoxide complexes were also synthesized via the reaction of Ti(O(i)Pr)4 and 1 equiv. of the proligand. Similar reactions of ZrCl4(THF)2 with the corresponding aminophenol ligands in the presence of triethylamine only allowed the isolation of zirconium complex . The X-ray diffraction studies reveal that titanium trichloride complexes , and titanium triisopropoxide complex all possess a distorted octahedral geometry with the tetradentate aminophenolate ligand in cis-O, N, N chelating mode, where the methoxy group of the aryl unit does not coordinate with the metal center in the solid state. Upon activation with MMAO, these titanium and zirconium(iv) complexes exhibited moderate to high catalytic activities for ethylene polymerization at 30-120 °C, producing high-molecular-weight polyethylenes with broad distributions (Mw/Mn = 10.2-34.8). The activities of titanium trichloride complexes are significantly higher than those of titanium isopropoxide and zirconium trichloride complexes at high temperatures. The highest activity of 15 456 kg (mol-Ti h)(-1) could be achieved by titanium trichloride complex with bromo groups on both ortho- and para-positions of the phenolate ring of the ligand at 120 °C.

Ortho-phosphinobenzenesulfonate: a superb ligand for palladium-catalyzed coordination-insertion copolymerization of polar vinyl monomers

Ligands, Lewis bases that coordinate to the metal center in a complex, can completely change the catalytic behavior of the metal center. In this Account, we summarize new reactions enabled by a single class of ligands, phosphine-sulfonates (ortho-phosphinobenzenesulfonates). Using their palladium complexes, we have developed four unusual reactions, and three of these have produced novel types of polymers. In one case, we have produced linear high-molecular weight polyethylene, a type of polymer that group 10 metal catalysts do not typically produce. Secondly, complexes using these ligands catalyzed the formation of linear poly(ethylene-co-polar vinyl monomers). Before the use of phosphine-sulfonate catalysts, researchers could only produce ethylene/polar monomer copolymers that have different branched structures rather than linear ones, depending on whether the polymers were produced by a radical polymerization or a group 10 metal catalyzed coordination polymerization. Thirdly, these phosphine-sulfonate catalysts produced nonalternating linear poly(ethylene-co-carbon monoxide). Radical polymerization gives ethylene-rich branched ethylene/CO copolymers copolymers. Prior to the use of phosphine-sulfonates, all of the metal catalyzed processes gave completely alternating ethylene/carbon monoxide copolymers. Finally, we produced poly(polar vinyl monomer-alt-carbon monoxide), a copolymerization of common polar monomers with carbon monoxide that had not been previously reported. Although researchers have often used symmetrical bidentate ligands such as diimines for the polymerization catalysis, phosphine-sulfonates are unsymmetrical, containing two nonequivalent donor units, a neutral phosphine, and an anionic sulfonate. We discuss the features that make this ligand unique. In order to understand all of the new reactions facilitated by this special ligand, we discuss both the steric effect of the bulky phosphines and electronic effects. We provide a unified interpretation of the unique reactivity by considering of the net charge and the enhanced back donation in the phosphine-sulfonate complexes.

Influence of the Steric Demand of Coligands on the Catalytic Activity of Nickel(II) Complexes in the Copolymerization of Ethene and Carbon Monoxide

The copolymerization of ethene and carbon monoxide can be catalyzed with square planar arenidotriphenylphosphane nickel(II) complexes containing an N,O-chelate ligand. To examine the influence of the phosphorus ligand on the catalytic activity, five new nickel(II) complexes with P-ligands of different basicities and different steric demands were synthesized and fully characterized including the determination of the crystal structures of three of the complexes. The investigation of the catalytic activity of the new compounds showed a decisive influence of the steric properties of the P-ligand. A minimum steric demand is essential to ensure catalytic activity.