Tris(alkyne) and Bis(alkyne) Complexes of Coinage Metals: Synthesis and Characterization of (cyclooctyne)3M+ (M = Cu, Ag) and (cyclooctyne)2Au+ and Coinage Metal (M = Cu, Ag, Au) Family Group Trends

Photochemistry and Photophysics of Charge-Transfer Excited States in Emissive d10/d0 Heterobimetallic Titanocene Tweezer Complexes

Transition-metal complexes that undergo ligand-to-metal charge transfer (LMCT) to d⁰ metals are of interest as possible photocatalysts due to the lack of deactivating d-d states. Herein, the synthesis and characterization of nine titanocene complexes of the formula Cp₂Ti(C₂Ar)₂·MX (where Ar = phenyl, dimethylaniline, or triphenylamine; and MX = CuCl, CuBr, or AgCl) are presented. Solid-state structural characterization demonstrates that MX coordinates to the alkyne tweezers and CuX coordination has a greater structural impact than AgCl. All complexes, including the parent complexes without coordinated MX, are brightly emissive at 77 K (emission max between 575 and 767 nm), with the coordination of MX redshifting the emission in all cases except for the coordination of AgCl into Cp₂Ti(C₂Ph)₂. TDDFT investigations suggest that emission is dominated by arylalkynyl-to-titanium ³LMCT in all cases except Cp₂Ti(C₂Ph)₂·CuBr, which is dominated by CuBr-to-Ti charge transfer. In room-temperature fluid solution, only Cp₂Ti(C₂Ph)₂ and Cp₂Ti(C₂Ph)₂·AgCl are emissive, albeit with photoluminescent quantum yields ≤2 × 10^-4. The parent complexes photodecompose in room-temperature solution with quantum yields, Φ_rxn, between 0.25 and 0.99. The coordination of MX decreases Φ_rxn by two to three orders of magnitude. There is a clear trend that Φ_rxn increases as the emission energy increases. This trend is consistent with a competition between energy-gap-law controlled nonradiative decay and thermally activated intersystem crossing between the ³LMCT state and the singlet transition state for decomposition.

Terminal and Internal Alkyne Complexes and Azide-Alkyne Cycloaddition Chemistry of Copper(I) Supported by a Fluorinated Bis(pyrazolyl)borate

Copper plays an important role in alkyne coordination chemistry and transformations. This report describes the isolation and full characterization of a thermally stable, copper(I) acetylene complex using a highly fluorinated bis(pyrazolyl)borate ligand support. Details of the related copper(I) complex of HC≡CSiMe₃ are also reported. They are three-coordinate copper complexes featuring η²-bound alkynes. Raman data show significant red-shifts in C≡C stretch of [H₂B(3,5-(CF₃)₂Pz)₂]Cu(HC≡CH) and [H₂B(3,5-(CF₃)₂Pz)₂]Cu(HC≡CSiMe₃) relative to those of the corresponding alkynes. Computational analysis using DFT indicates that the Cu(I) alkyne interaction in these molecules is primarily of the electrostatic character. The π-backbonding is the larger component of the orbital contribution to the interaction. The dinuclear complexes such as Cu₂(μ-[3,5-(CF₃)₂Pz])₂(HC≡CH)₂ display similar Cu-alkyne bonding features. The mononuclear [H₂B(3,5-(CF₃)₂Pz)₂]Cu(NCMe) complex catalyzes [3 + 2] cycloadditions between tolyl azide and a variety of alkynes including acetylene. It is comparatively less effective than the related trinuclear copper catalyst {μ-[3,5-(CF₃)₂Pz]Cu}₃ involving bridging pyrazolates.

(Hexafluoroacetylacetonato)copper(I)-cycloalkyne complexes as protected cycloalkynes

A protection method for cycloalkynes by the formation of (hexafluoroacetylacetonato)copper(i)-cycloalkyne complexes is disclosed. Various complexes having functional groups were efficiently prepared, which are easily purified by silica-gel column chromatography. Selective click reactions were realized through the complexation of cycloalkynes with copper.

Selective strain-promoted azide-alkyne cycloadditions through transient protection of bicyclo[6.1.0]nonynes with silver or gold

Complexation of bicyclo[6.1.0]nonynes with a cationic silver or gold salt results in protection from a click reaction with azides. The cycloalkyne protection using the silver or gold salt enables selective strain-promoted azide-alkyne cycloadditions of diynes keeping the bicyclo[6.1.0]nonyne moiety unreacted.

Sequential conjugation methods based on triazole formation and related reactions using azides

The recent remarkable progress in azide chemistry has realized sequential conjugation methods with selective 1,2,3-triazole formation. On the basis of the diverse reactivities of azides and azidophiles, including terminal alkynes and cyclooctynes, various selective reactions to furnish triazoles and a wide range of platform molecules, such as diynes, diazides, triynes, and triazides, have been developed so far for bis- and tris(triazole) syntheses. This review highlights recent transformations involving selective triazole formation, allowing the efficient preparation of unsymmetric bis- and tris(triazole)s using diverse platform molecules.

Progress and Prospects of Graphdiyne-Based Materials in Biomedical Applications

Graphdiyne is a new member of the family of carbon-based nanomaterials that possess two types of carbon atoms, sp- and sp² -hybridized carbon atoms. As a novel 2D carbon-based nanomaterial with unique planar structure, such as uniformly distributed nanopores and large conjugated structure, graphdiyne has shown many fascinating properties in mechanics, electronics, and optics since it was first experimentally synthesized in 2010. Up to now, graphdiyne and its derivatives have been reported to be successfully applied in many areas, such as catalysis, energy, environment, and biomedicine, due to these excellent properties. Herein, the current research progress of graphdiyne-based materials in biomedical fields is summarized, including biosensing, biological protection, cancer therapy, tissue engineering, etc. The advantages of graphdiyne and its derivatives are presented and compared with other carbon-based materials. Considering the potential biomedical and clinical applications of graphdiyne-based materials, the toxicity and biocompatibility are also discussed based on current studies. Finally, future perspectives and possible biomedical applications of graphdiyne-based materials are also discussed.

Acetylene and terminal alkyne complexes of copper(i) supported by fluorinated pyrazolates: syntheses, structures, and transformations

A variety of isolable, 2 : 1 and 1 : 1 copper(i)–alkyne complexes of containing pyrazolate ligand supports are presented as well as the copper pyrazolate mediated acetylenic C–H and alkyne CC bond functionalizations.

Dative versus electron-sharing bonding in N-oxides and phosphane oxides R3EO and relative energies of the R2EOR isomers (E = N, P; R = H, F, Cl, Me, Ph). A theoretical study

Quantum chemical calculations using ab initio methods at the CCSD(T)/def2-TZVPP level and density functional theory using BP86 and M06-2X functionals in conjunction with def2-TZVPP basis sets have been carried out on the title molecules.

Role of σ,π-Digold(I) Alkyne Complexes in Reactions of Enynes

Gold(I) acetylide and σ,π-digold(I) alkyne complexes derived from one prototypical 1,6-enyne and from 7-ethynyl-1,3,5-cycloheptatriene have been prepared and structurally characterized. Their possible role in gold(I)-catalyzed cycloisomerizations has been studied by experiment and by DFT calculations. Gold(I) acetylides are totally unproductive complexes in the absence of Brønsted acids. Similarly, no cyclizations were observed by heating σ,π-digold(I) alkyne digold(I) at least up to 130 °C. Theoretical studies provide a rationale for the much lower reactivity of digold species in reactions of enynes.

Heterobimetallic Silver-Iron Complexes Involving Fe(CO)5 Ligands

Iron(0) pentacarbonyl is an organometallic compound with a long history. It undergoes carbonyl displacement chemistry with various donors (L), leading to molecules of the type Fe(CO)_x(L)_5-x. The work reported here illustrates that Fe(CO)₅ can also act as a ligand. The reaction between Fe(CO)₅ with the silver salts AgSbF₆ and Ag[B{3,5-(CF₃)₂C₆H₃}₄] under appropriate conditions resulted in the formation of [(μ-H₂O)AgFe(CO)₅]₂[SbF₆]₂ and [B{3,5-(CF₃)₂C₆H₃}₄]AgFe(CO)₅, respectively, featuring heterobimetallic {Ag-Fe(CO)₅}⁺ fragments. The treatment of [B{3,5-(CF₃)₂C₆H₃}₄]AgFe(CO)₅ with 4,4'-dimethyl-2,2'-bipyridine (Me₂Bipy) and Fe(CO)₅ afforded a heterobimetallic [(Me₂Bipy)AgFe(CO)₅][B{3,5-(CF₃)₂C₆H₃}₄] species with a Ag-Fe(CO)₅ bond and a heterotrimetallic [{Fe(CO)₅}₂(μ-Ag)][B{3,5-(CF₃)₂C₆H₃}₄] with a (CO)₅Fe-Ag-Fe(CO)₅ core, respectively, illustrating that it is possible to manipulate the coordination sphere at silver while keeping the Ag-Fe bond intact. The chemistry of [B{3,5-(CF₃)₂C₆H₃}₄]AgFe(CO)₅ with Et₂O and PMes₃ (Mes = 2,4,6-trimethylphenyl) has also been investigated, which led to [(Et₂O)₃Ag][B{3,5-(CF₃)₂C₆H₃}₄] and [(Mes₃P)₂Ag][B{3,5-(CF₃)₂C₆H₃}₄] with the displacement of the Fe(CO)₅ ligand. X-ray structural and spectroscopic data of new molecules as well as results of computational analyses are presented. The Fe-Ag bond distances of these metal-only Lewis pairs range from 2.5833(4) to 2.6219(5) Å. These Ag-Fe bonds are of primarily an ionic/electrostatic nature with a modest amount of charge transfer between Ag⁺ and Fe(CO)₅. The ν̅(CO) bands of the molecules with Ag-Fe(CO)₅ bonds show a notable blue shift relative to those observed for free Fe(CO)₅, indicating a significant reduction in Fe→CO back-bonding upon its coordination to silver(I).

Alkali and Alkaline Earth Metal Complexes Ligated by an Ethynyl Substituted Cyclopentadienyl Ligand

Sodium, potassium, and calcium compounds of trimethyl((2,3,4,5-tetramethylcyclopentadien-1-yl)ethynyl)silane (CpMe4(C≡CSiMe3)) were synthesized and characterized by X-ray diffraction and standard analytical methods. The sodium derivative was obtained by deprotonation of CpMe4(C≡CSiMe3)H with Na{N(SiMe3)2} to give a monomeric complex [NaCpMe4(C≡CSiMe3)(THF)3]. In a similar reaction, starting from K{N(SiMe3)2} the corresponding potassium compound [KCpMe4(C≡CSiMe3)(THF)2]n, which forms a polymeric super sandwich structure in the solid state, was obtained. Subsequently, salt metathesis reactions were conducted in order to investigate the versatility of the CpMe4(C≡CSiMe3)− ligand in alkaline earth chemistry. The reaction of [KCpMe4(C≡CSiMe3)(THF)2]n with CaI2 afforded the dimeric complex [CaCpMe4(C≡CSiMe3)I(THF)2]2, in which both CpMe4(C≡CSiMe3)Ca units are bridged by iodide in a μ2 fashion. In-depth NMR investigation indicates that [CaCpMe4(C≡CSiMe3)I(THF)2]2 is in a Schlenk equilibrium with [{CpMe4(C≡CSiMe3)}2Ca(THF)x] and CaI2(THF)2, as is already known for [CaCp*I(THF)2].

NHC-Stabilised Acetylene-How Far Can the Analogy Be Pushed?

Experimental studies suggest that the compound (NHC^bz )₂ C₂ H₂ can be considered as a complex of a distorted acetylene fragment which is stabilised by benzoannelated N-heterocyclic carbene ligands (NHC^bz )→(C₂ H₂ )←(NHC^bz ). A quantum chemical analysis of the electronic structures shows that the description with dative bonds is more favourable than with electron-sharing double bonds (NHC^bz )=(C₂ H₂ )=(NHC^bz ).

The hypothiocyanite radical OSCN and its isomers

An elusive biologically relevant hypothiocyanite radical (OSCN) has been generated in the gas phase, and its reversible photoisomerization with two novel isomers OSNC and SOCN has been observed in cryogenic Ar and N₂ matrices at 2.8 K.

Isomerization of Cyclooctadiene to Cyclooctyne with a Zinc/Zirconium Heterobimetallic Complex

Reaction of a zinc/zirconium heterobimetallic complex with 1,5-cyclooctadiene (1,5-COD) results in slow isomerization to 1,3-cyclooctadiene (1,3-COD), along with the formation of a new complex that includes a cyclooctyne ligand bridging two metal centers. While analogous magnesium/zirconium and aluminum/zirconium heterobimetallic complexes are competent for the catalytic isomerization of 1,5-COD to 1,3-COD, only in the case of the zinc species is the cyclooctyne adduct observed.

Selective formation of silver(i) bis-phospholane macrocycles and further evidence that gold(i) is smaller than silver(i)

Highly flexible bis-phospholane ligands form 16- to 28-membered dinuclear macrocyclic silver(i) complexes selectively without using high-dilution techniques. Comparison with gold(i) complexes gives further evidence that gold(i) is significantly smaller than silver(i).

Donor–acceptor bonding in novel low-coordinated compounds of boron and group-14 atoms C–Sn

Donor–acceptor complexes of one, two or three atoms E = B, Si–Sn which are stabilized by σ-donor ligands L are discussed.

An element through the looking glass: exploring the Au-C, Au-H and Au-O energy landscape

Gold, the archetypal "noble metal", used to be considered of little interest in catalysis. It is now clear that this was a misconception, and a multitude of gold-catalysed transformations has been reported. However, one consequence of the long-held view of gold as inert metal is that its organometallic chemistry contains many "unknowns", and catalytic cycles devised to explain gold's reactivity draw largely on analogies with other transition metals. How realistic are such mechanistic assumptions? In the last few years a number of key compound classes have been discovered that can provide some answers. This Perspective attempts to summarise these developments, with particular emphasis on recently discovered gold(iii) complexes with bonds to hydrogen, oxygen, alkenes and CO ligands.

Dispersion, solvent and metal effects in the binding of gold cations to alkynyl ligands: implications for Au(I) catalysis

The coordination modes of the [Au(PPh3)](+) cation to metal alkynyl complexes have been investigated. On addition to ruthenium, a vinylidene complex, [Ru(η(5)-C5H5)(PPh3)2([double bond, length as m-dash]C[double bond, length as m-dash]CPh{AuPPh3})](+), is obtained while addition to a gold(iii) compound gives di- and trinuclear gold complexes depending on the conditions employed. In the trinuclear species, a gold(i) cation is sandwiched between two gold(iii) alkynyl complexes, suggesting that coordination of multiple C-C triple bonds to gold is facile.

The fate of NHC-stabilized dicarbon

The attempted synthesis of NHC-stabilized dicarbon (NHC=C=C=NHC) through deprotonation of a doubly protonated precursor ([NHC-CH=CH-NHC](2+) ) is reported. Rather than deprotonation, a clean reduction to NHC=CH-CH=NHC is observed with a variety of bases. The apparent resistance towards deprotonation to the target compound led to a reinvestigation of the electronic structure of NHC→CC←NHC, which showed that the highest occupied molecular orbital/lowest unoccupied molecular orbital (HOMO/LUMO) gap is likely too small to allow for isolation of this species. This is in contrast to the recent isolation of the cyclic alkylaminocarbene analogue (cAAC=C=C=cAAC), which has a large HOMO-LUMO gap. A detailed theoretical study illuminates the differences in electronic structures between these molecules, highlighting another case of the potential advantages of using cAAC rather than NHC as a ligand. The bonding analysis suggests that the dicarbon compounds are well represented in terms of donor-acceptor interactions L→C2 ←L (L=NHC, cAAC).

Expanding the scope of strained-alkyne chemistry: a protection–deprotection strategy via the formation of a dicobalt–hexacarbonyl complex

A protection–deprotection strategy for strained alkynes is reported. A strained alkyne can be protected with dicobalt–octacarbonyl and we demonstrate for the first time that the a strained alkyne can be re-formed and isolated under mild conditions for further bioorthogonal reactivity.

Copper(i), silver(i) and gold(i) complexes of N-heterocyclic carbene-phosphinidene

IMes·PPh serves as a good bridging ligand for group 11 metal ions affording molecules with diverse solid state structures.

Energy decomposition analysis approaches and their evaluation on prototypical protein–drug interaction patterns

The partitioning of the interaction energy into chemical components such as electrostatics, polarization, and charge transfer is possible with energy decomposition analysis approaches. We review and evaluate these for biomolecular applications.

Experimental and theoretical studies of the infrared spectra and bonding properties of NgBeCO₃ and a comparison with NgBeO (Ng = He, Ne, Ar, Kr, Xe)

The novel neon complex NeBeCO3 has been prepared in a low-temperature neon matrix via codeposition of laser-evaporated beryllium atoms with O2 + CO/Ne. Doping by the heavier noble gas atoms argon, krypton and xenon yielded the associated adducts NgBeCO3 (Ng = Ar, Kr, Xe). The noble gas complexes have been identified via infrared spectroscopy. Quantum chemical calculations of NgBeCO3 and NgBeO (Ng = He, Ne, Ar, Kr, Xe) using ab initio methods and density functional theory show that the Ng-BeCO3 bonds are slightly longer and weaker than the Ng-BeO bonds. The energy decomposition analysis of the Ng-Be bonds suggests that the attractive interactions come mainly from the Ng → BeCO3 and Ng → BeO σ donation.

NHC-AuCl/selectfluor: a highly efficient catalytic system for carbene-transfer reactions

The combination of NHC-gold complex and Selectfluor has been found to be a highly efficient catalyst system for carbene-transfer reactions, with a turnover number (TON) up to 990000 and a turnover frequency (TOF) up to 82500 h(-1).

Intriguing mechanistic labyrinths in gold(I) catalysis

Gold(i) controls complex transformations proceeding through carbocationic species by stabilising the key reactive intermediates.

Many mechanistically intriguing reactions have been developed in the last decade using gold(i) as catalyst. Here we review the main mechanistic proposals in gold-catalysed activation of alkynes and allenes, in which this metal plays a central role by stabilising a variety of complex cationic intermediates.