Insight into the Hydrogen Migration Processes Involved in the Formation of Metal–Borane Complexes: Importance of the Third Arm of the Scorpionate Ligand

Synthesis and Structural Characterization of Copper Complexes Containing "R-Substituted" Bis-7-Azaindolyl Borate Ligands

The coordination chemistry of scorpionate ligands based on borates containing the 7-azaindole heterocycle is relatively unexplored. Thus, there is a requirement to further understand their coordination chemistry. This article outlines the synthesis and characterization of a family of complexes containing anionic flexible scorpionate ligands of the type [(R)(bis-7-azaindolyl)borohydride]^- ([^RBai]^-), where R = Me, Ph or naphthyl. The three ligands were coordinated to a series of copper(I) complexes containing a phosphine co-ligand to form the complexes, [Cu(^MeBai)(PPh₃)] (1), [Cu(^PhBai)(PPh₃)] (2), [Cu(^NaphthBai)(PPh₃)] (3), [Cu(^MeBai)(PCy₃)] (4), [Cu(^PhBai)(PCy₃)] (5) and [Cu(^NaphthBai)(PCy₃)] (6). Additional copper(II) complexes, namely, [Cu(^MeBai)₂] (7) and [Cu(^PhBai)₂] (8), were obtained during attempts to obtain single crystals from complexes 4 and 2, respectively. Complexes 7 and 8 were also prepared independently from CuCl₂ and two equivalents of the corresponding Li[^RBai] salt alongside an additional complex, namely, [Cu(^NaphthBai)₂] (9). The copper(I) and copper(II) complexes were characterized using spectroscopic and analytical methods. Furthermore, a crystal structure was obtained for eight of the nine complexes. In all cases, the boron-based ligand was found to bind to the metal centers via a κ³-N,N,H coordination mode.

Adding to the Family of Copper Complexes Featuring Borohydride Ligands Based on 2-Mercaptopyridyl Units

Borohydride ligands featuring multiple pendant donor functionalities have been prevalent in the chemical literature for many decades now. More recent times has seen their development into new families of so-called soft scorpionates, for example, those featuring sulfur based donors. Despite all of these developments, those ligands containing just one pendant group are rare. This article explores one ligand family based on the 2-mercaptopyridine heterocycle. The coordination chemistry of the monosubstituted ligand, [H3B(mp)]− (mp = 2-mercaptopyridyl), has been explored. Reaction of Na[BH3(mp)] with one equivalent of Cu(I)Cl in the presence of either triphenylphosphine or tricyclohexylphosphine co-ligands leads to the formation of [Cu{H3B(mp)}(PR3)] (R = Ph, 1; Cy, 2), respectively. Structural characterization confirms a κ3-S,H,H coordination mode for the borohydride-based ligand within 1 and 2, involving a dihydroborate bridging interaction (BH2Cu) with the copper centers.

5-Mercaptotetrazolyl-derived metallaboratranes

The reactions of 1-tert butyl-5-thiotetrazole (HtttBu) with Na[BH4] provides Na[H2B(tttBu)2] (Na[1]) or Na[HB(tttBu)3] (Na[2]) in refluxing THF or xylene, respectively. Treating [RuCl(Ph)(CO)(PPh3)2] with Na[2] affords the triply-buttressed ruthenaboratrane [Ru(CO)(PPh3){κ4-B,S,S',S''-B(tttBu)3}] (5) whilst Na[1] with [IrCl(CO)(PPh3)2] or [RuCl(Ph)(CO)(PPh3)2] provides rare examples of doubly-buttressed metallaboratranes [IrH(CO)(PPh3){κ3-B,S,S'-BH(tttBu)2}] (7) and [Ru(CO)(PPh3)2{κ3-B,S,S'-BH(tttBu)2}] (12), the latter via the isolable thiotetrazoylborate complex [Ru(Ph)(CO)(PPh3){κ3-H,S,S'-H2B(tttBu)2}] (11).

Synthesis and ligand substitution reactions of κ4-B,S,S′,S′′-ruthenaboratranes

Ruthenaboratranes of the form [Ru(CO)L{κ⁴-B(mt)₃}] (mt = N-methimazolyl) arise via substitution of the PPh₃ ligand in [Ru(CO)(PPh₃){κ⁴-B(mt)₃}] by L (L = PMe₂Ph, PMe₃, P(OMe)₃, P(OEt)₃, P(OPh)₃) or reactions of [RuCl(R)(CO)L_n] (R = Ph, CHCHPh; n = 2, L = PCy₃; n = 3, L = P(OMe)₃, PMe₂Ph) with Na[HB(mt)₃].

Methimazolyl based diptych bicyclo-[3.3.0]-ruthenaboratranes

The reactions of [RuCl(R)(CO)(PPh₃)₂] (R = CHCHPh, Ph) with Na[H₂B(mt)₂] (mt = N-methyl-2-mercaptoimidazolyl) transiently provide [Ru(R)(CO)(PPh₃){κ³-H,S,S′-H₂B(mt)₂}] which each evolve to the ruthenaboratrane [Ru(CO)(PPh₃)₂{κ³-B,S,S′-BH(mt)₂}](Ru→B)⁸.

Preparation and reactivity of rhodium and iridium complexes containing a methylborohydride based unit supported by two 7-azaindolyl heterocycles

The synthesis and characterisation of a new anionic flexible scorpionate ligand, methyl(bis-7-azaindolyl)borohydride [MeBai]- is reported herein. The ligand was coordinated to a series of group nine transition metal centres forming the complexes, [Ir(MeBai)(COD)] (1), [Rh(MeBai)(COD)] (2), [Rh(MeBai)(CODMe)] (2-Me) and [Rh(MeBai)(NBD)] (3), where COD = 1,5-cyclooctadiene, CODMe = 3-methyl-1,5-cyclooctadiene and NBD = 2,5-norbornadiene. In all cases, the boron based ligand was found to bind to the metal centres via a κ3-N,N,H coordination mode. The ligand and complexes were fully characterised by spectroscopic and analytical methods. The structures of the ligand and three of the complexes were confirmed by X-ray crystallography. The potential for migration of the "hydride" or "methyl" units from boron to the metal centre was also explored. During these studies an unusual transformation, involving the oxidation of the rhodium centre, was observed in complex 2. In this case, the η4-COD unit transformed into a η1,η3-C8H12 unit where the ring was bound via one sigma bond and one allyl unit. This is the first time such a transformation has been observed at a rhodium centre.

Functional group migrations between boron and metal centres within transition metal-borane and -boryl complexes and cleavage of H-H, E-H and E-E' bonds

This feature article examines some of the recent advances in the chemistry of Z-type transition metal-borane and X-type transition metal-boryl complexes. It focuses on the employment of these boron-based functionalities acting as stores and transfer agents for functional groups such as hydrides, alkyl groups and aryl groups which can either be abstracted or delivered to the metal centre. The review also explores the rather novel reactivity involving the cleavage of H-H, E-H and E-E' bonds (where E and E' are a range of groups) across the transition metal-boron bond in such complexes. It explores the early examples of the addition of H-H across transition metal-borane bonds and describes the new transformation in the context of other known modes of hydrogen activation including classic oxidative addition and heterolytic cleavage at transition metal centres as well as Frustrated Lewis Pair chemistry. Similar reactivity involving transition metal-boryl complexes are also described particularly those which undergo both boryl-to-borane and borane-to-borohydride transformations. The delivery of hydride to the metal centre in combination with the potential to regenerate the borohydride functional group via a recharging process is explored in the context of providing a new strategy for catalysis. Finally, a light-hearted look at the analogy of the 'stinging processes' involving Trofimenko type ligands is taken one step further to determine whether it is indeed in the nature of scorpionate ligands to repeatedly 'sting' just as the real life scorpions do.

An Efficient Method for the Synthesis of Boratrane Complexes of Late Transition Metals

In a quest for efficient precursors for the synthesis of boratrane complexes of late transition metals, we have developed a useful synthetic method using [L'M(μ-Cl)Cl_x ]₂ as precursors (L'=η⁶ -p-cymene, M=Ru, x=1; L'=COD, M=Rh, x=0 and L'=Cp*, M=Ir or Rh, x=1; COD=1,5-cyclooctadiene, Cp*=η⁵ -C₅ Me₅ ). For example, treatment of Na[(H₃ B)bbza] or Na[(H₂ B)mp₂ ] (bbza=bis(benzothiazol-2-yl)amine; mp=2-mercaptopyridyl) with [L'M(μ-Cl)Cl_x ]₂ yielded [(η⁶ -p-cymene)RuBH{(NCSC₆ H₄ )(NR)}₂ ] (2; R=NCSC₆ H₄ ), [{N(NCSC₆ H₄ )₂ }RhBH{(NCSC₆ H₄ )(NR)}₂ ] (3; R=NCS-C₆ H₄ ), [(η⁶ -p-cymene)RuBH(L)₂ ] (5; L=C₅ H₄ NS), and [Cp*MBH(L)₂ ] (6 and 7; L=C₅ H₄ NS, M=Ir or Rh). In order to delineate the significance of the ligands, we studied the reactivity of [(COD)Rh(μ-Cl)]₂ with Na[(H₃ B)bbza], which led to the formation of the isomeric agostic complexes [(η⁴ -COD)Rh(μ-H)BHRh(C₁₄ H₈ N₃ S₂ )₃ ], 4 a and 4 b, in parallel to the formation of 16-electron square-pyramidal rhodaboratrane complex 3. Compounds 4 a and 4 b show two different geometries, in which the Rh-B bonds are shorter than in the reported Rh agostic complexes. The new compounds have been characterized in solution by various spectroscopic analyses, and their structural arrangements have been unequivocally established by crystallographic analyses. DFT calculations provide useful insights regarding the stability of these metallaboratrane complexes as well as their M→B bonding interactions.

Complexes of ambiphilic ligands: reactivity and catalytic applications

This review focuses on the way Lewis acids of ambiphilic ligands influence the reactivity of transition metal complexes and on the new perspectives this opens in catalysis.

Copper and silver complexes bearing flexible hybrid scorpionate ligand mpBm

The addition of flexible scorpionate ligand, [mpBm]⁻{i.e. HB(mt)2(mp), where mt = methyl-2-mercaptoimidazole and mp = 2-mercaptopyridine} to group eleven centres is reported for the first time. The coordination of this hybrid ligand to copper(I) and silver(I) centres in the presence of triphenylphosphine and trialkylphosphine co-ligands has been investigated. The trialkylphosphines coordinates to both copper and silver centres while the less basic triarylphosphine only successfully coordinates to the copper centre. Structural characterisation of [Cu{HB(mt)₂(mp)}(PPh₃)], [Cu{HB(mt)₂(mp)}(PCy₃)] and [Ag{HB(mt)₂(mp)}(PCy₃)] confirm κ³-SSH coordination modes for ligand where one of the mt 'arms' and the mp 'arm' of the scorpionate ligand are coordinated to the metal centre. The second mt 'arm' remains uncoordinated in all three complexes. A comparison has been made with the parent sulfur based scorpionate ligand, [Tm]⁻{HB(mt)₃}.