Synthesis and Properties of Heavy Chalcogen Analogues of the Texas Reds and Related Rhodamines

Exploring the Te(II)/Te(IV) Redox Couple of a Tellurorosamine Chromophore: Photophysical, Photochemical, and Electrochemical Studies

A tellurorosamine dye [Te(II)] undergoes aerobic photooxidation. Although Te(IV) species have been used in a number of oxidations, key Te(IV)-oxo and Te(IV)-bis(hydroxy) intermediates are challenging to study. Under aerobic irradiation with visible light, Te(II) (λmax = 600 nm) transforms into a Te(IV) species (λmax = 669 nm). The resultant Te(IV) species is not stable in the dark or at -20 °C, decomposing back to Te(II) and other byproducts over many hours. To eliminate the structural ambiguity of the Te(IV) photoproduct, we used spectroelectrochemistry, wherein the bis(hydroxy) Te(IV)-(OH)2 was electrochemically generated under anaerobic conditions. The absorption of Te(IV)-(OH)2 matches that of the Te(IV) photoproduct. Because isosbestic points are maintained both photochemically and electrochemically, the oxo core formed photochemically must rapidly equilibrate with Te(IV)-(OH)2. Calculations on the bis(hydroxy) versus oxo species further corroborate that the equilibration is rapid and the spectra of the two species are similar. To further explore Te(IV) cores, two novel compounds, Te(IV)-Cl2 and Te(IV)-Br2, were synthesized. Characterization of Te(IV)-X2 was simplified because these cores have no analogue to the Te(IV)-(O)/Te(IV)-(OH)2 equilibrium. This work provides insights into the photophysical and electrochemical behavior of Te analogues of chalcogenoxanthylium dyes, which are relevant for a broad range of photochemical applications.

Exploring the fluorescence properties of tellurium-containing molecules and their advanced applications

This review article explores the fascinating realm of fluorescence using organochalcogen molecules, with a particular emphasis on tellurium (Te). The discussion encompasses the underlying mechanisms, structural motifs influencing fluorescence, and the applications of these intriguing phenomena. This review not only elucidates the current state of knowledge but also identifies avenues for future research, thereby serving as a valuable resource for researchers and enthusiasts in the field of fluorescence chemistry with a focus on Te-based molecules. By highlighting challenges and prospects, this review sparks a conversation on the transformative potential of Te-containing compounds across different fields, ranging from environmental solutions to healthcare and materials science applications. This review aims to provide a comprehensive understanding of the distinct fluorescence behaviors exhibited by Te-containing compounds, contributing valuable insights to the evolving landscape of chalcogen-based fluorescence research.

6-Endo-dig versus 5-exo-dig: Exploring Radical Cyclization Preference with First-, Second-, and Third-row Linkers using High-level Quantum Chemical Methods

As an expansion upon Baldwin rules, the cyclization reactions of hex-5-yn-1-yl radical systems with different first-, second-, and third-row linkers are explored at the CCSD(T) level via means of the SMD(benzene)-G4(MP2) thermochemical protocol. Unlike C, O, and N linkers, systems with B, Si, P, S, Ge, As, and Se linkers are shown to favor 6-endo-dig cyclization. This offers fundamental insights into the rational synthetic design of cyclic compounds. A thorough analysis of stereoelectronic effects, cyclization barriers, and intrinsic barriers illustrates that structural changes alter the cyclization preference by mainly impacting 5-exo-dig reaction barriers. Based on the high-level computational modeling, we proceed to develop a new tool for cyclization preference prediction from the correlation between cyclization barriers and radical structural parameters (e. g., linker bond length and bond angle). A strong correlation is found between the radical attack trajectory angle and the reaction barrier heights, i. e., cyclization preference. Finally, the influence of stereoelectronic effects on the two radical cyclization pathways is further investigated in stereoisomers of hypervalent silicon system, which provides novel insight into cyclization control.

Boron-Methylated Dipyrromethene as a Green Light Activated Type I Photoinitiator for Rapid Radical Polymerizations

Unimolecular (Type I) radical photoinitiators (PIs) have transformed the chemical manufacturing industry by enabling (stereo)lithography for microelectronics and emergent 3D printing technologies. However, the reliance on high energy UV-violet light (≤420 nm) restricts the end-use applications. Herein, boron-methylated dipyrromethene (methylated-BODIPY) is shown to act as a highly efficient Type I radical PI upon irradiation with low energy green light. Using a low intensity (∼4 mW/cm2) light emitting diode centered at 530 nm and a low PI concentration (0.3 mol %), acrylic-based resins were polymerized to maximum conversion in ∼10 s. Under equivalent conditions (wavelength, intensity, and PI concentration), state-of-the-art visible light PIs Ivocerin and Irgacure 784 show no appreciable polymerization. Spectroscopic characterization suggests that homolytic β-scission at the boron-carbon bond results in radical formation, which is further facilitated by accessing long-lived triplet excited states through installment of bromine. Alkylated-BODIPYs represent a new modular visible light PI platform with exciting potential to enable next generation manufacturing and biomedical applications where a spectrally discrete, low energy, and thus benign light source is required.

Synthesis, photophysical characterization, and aerobic redox reactivity of electron-rich tellurorhodamine photocatalysts

Tellurorhodamine dyes are a class of self-sensitizing chromophores that we have previously shown can photocatalytically oxidize a variety of organic and inorganic compounds with visible light, oxygen, and water. A new series of tellurorhodamine chromophores containing electron donating moieties were synthesized to explore how different electron donating groups affect photophysical properties and catalyst function. The synthesized complexes 1B, 1C, and 1D contain increasingly electron-donating substituents (Me, t-Butyl, OMe) on the xylene ring. 1A, containing an unsubstituted xylene, was synthesized for use as a control. UV-Vis spectroscopy was used to determine the photophysical properties of the dyes and for kinetic and thermodynamic studies. With visible light irradiation all dyes could be oxidized at room temperature to their corresponding telluroxides 2A, 2B, 2C, and 2D, as confirmed by mass spectroscopy. Comparative reduction studies using our previously established silane oxidation reaction showed that decreasing the electron density of the xylene moiety increased the rate of reduction, corresponding to a decrease in the experimental ΔG. 2D has the smallest energy barrier to silane oxidation, and a linear increase in rate with increasing substituent electron withdrawing nature was observed at low temperatures, and non-linearity at high temperatures.

The design of small-molecule prodrugs and activatable phototherapeutics for cancer therapy

Cancer remains as one of the most significant health problems, with approximately 19 million people diagnosed worldwide each year. Chemotherapy is a routinely used method to treat cancer patients. However, current treatment options lack the appropriate selectivity for cancer cells, are prone to resistance mechanisms, and are plagued with dose-limiting toxicities. As such, researchers have devoted their attention to developing prodrug-based strategies that have the potential to overcome these limitations. This tutorial review highlights recently developed prodrug strategies for cancer therapy. Prodrug examples that provide an integrated diagnostic (fluorescent, photoacoustic, and magnetic resonance imaging) response, which are referred to as theranostics, are also discussed. Owing to the non-invasive nature of light (and X-rays), we have discussed external excitation prodrug strategies as well as examples of activatable photosensitizers that enhance the precision of photodynamic therapy/photothermal therapy. Activatable photosensitizers/photothermal agents can be seen as analogous to prodrugs, with their phototherapeutic properties at a specific wavelength activated in the presence of disease-related biomarkers. We discuss each design strategy and illustrate the importance of targeting biomarkers specific to the tumour microenvironment and biomarkers that are known to be overexpressed within cancer cells. Moreover, we discuss the advantages of each approach and highlight their inherent limitations. We hope in doing so, the reader will appreciate the current challenges and available opportunities in the field and inspire subsequent generations to pursue this crucial area of cancer research.

9-Cyano-10-telluriumpyronin Derivatives as Red-light-activatable Raman Probes

Photoactivatable fluorescence probes can track the dynamics of specific cells or biomolecules with high spatiotemporal resolution, but their broad absorption and emission peaks limit the number of wavelength windows that can be employed simultaneously. In contrast, the narrower peak width of Raman signals offers more scope for simultaneous discrimination of multiple targets, and therefore a palette of photoactivatable Raman probes would enable more comprehensive investigation of biological phenomena. Herein we report 9-cyano-10-telluriumpyronin (9CN-TeP) derivatives as photoactivatable Raman probes whose stimulated Raman scattering (SRS) intensity is enhanced by photooxidation of the tellurium atom. Modification to increase the stability of the oxidation product led to a julolidine-like derivative, 9CN-diMeJTeP, which is photo-oxidized at the tellurium atom by red light irradiation to afford a sufficiently stable oxidation product with strong electronic pre-resonance, resulting in a bathochromic shift of the absorption spectrum and increased SRS intensity.

Design and evaluation of Raman reporters for the Raman-silent region

Rationale: Surface enhanced Raman scattering (SERS) is proving to be a useful tool for biomedical imaging. However, this imaging technique can suffer from poor signal-to-noise ratio, as the complexity of biological tissues can lead to overlapping of Raman bands from tissues and the Raman reporter molecule utilized. Methods: Herein we describe the synthesis of triple bond containing Raman reporters that scatter light in the biological silent window, between 1750 cm^-1 and 2750 cm^-1. Results: Our SERS nanoprobes are comprised of uniquely designed Raman reporters containing either alkyne- or cyano-functional groups, enabling them to be readily distinguished from background biological tissue. Conclusion: We identify promising candidates that eventually can be moved forward as Raman reporters in SERS nanoparticles for highly specific contrast-enhanced Raman-based disease or analyte detection in biological applications.

Metal-free late-stage C(sp2)-H functionalization of N-aryl amines with various sodium salts

Metal-free consecutive C(sp2)-X (X = Cl, Br, S, N) bond formations of N-aryl amines (cyclic, fused, carbamate, and aminium radicals) were achieved under mild conditions using [bis(trifluoroacetoxy)iodo]benzene (PIFA) and simple nonharmful sodium salts. This direct and selective C(sp2)-H functionalization showed excellent functional group compatibility, cost effectiveness, and late-stage applicability for the synthesis of biologically active natural products. Two mechanisms were proposed to explain the ortho- or para-preference, as well as the accelerating effect of CH3NO2.

Activatable Phototheranostic Materials for Imaging-Guided Cancer Therapy

Cancer theranostics, which combines diagnostic and therapeutic effects into one entity, holds promise in precision medicine. Conventional theranostic agents possess always-on imaging signals and cytotoxic effects and thus often encounter poor selectivity or specificity in cancer treatment. To tackle this issue, activatable phototheranostic materials (PMs) have been developed to simultaneously and specifically turn on their diagnostic signals (fluorescence/self-luminescence/photoacoustic signals) and photothermal/photodynamic effects in response to cancer hallmarks. This Review summarizes the recent progress in the design, synthesis and proof-of-concept applications of activatable PMs. The molecular engineering strategy to increase tumor accumulation and enhance treatment efficacy are highlighted. Current challenges and future perspectives in this emerging field are also discussed.

A lysosome-targeted near-infrared fluorescent probe for imaging of acid phosphatase in living cells

Fluorescent probes for the detection of acid phosphatases (ACP) are important in the investigation of the pathology and diagnosis of diseases. We reported a lysosome-targeted near-infrared (NIR) fluorescent probe SHCy-P based on a novel NIR-emitting thioxanthene-indolium dye for the detection of ACP. The probe showed a long wavelength fluorescence emission at λ_em = 765 nm. Due to the ACP-catalyzed cleavage of the phosphate group in SHCy-P, the probe exhibited high selectivity and sensitivity for the 'turn-on' detection of ACP with a limit of detection as low as 0.48 U L^-1. The probe SHCy-P could also be used to detect and image endogenous ACP in lysosomes. In light of these prominent properties, we envision that SHCy-P will be an efficient optical imaging approach for investigating the ACP activity in disease diagnosis.

A Modular Approach to Phosphorescent π-Extended Heteroacenes

A modular route to previously inaccessible classes of ring-fused π-extended heteroacenes bearing the heavy inorganic element tellurium (Te) is presented. These new materials can be viewed as n-doped analogs of molecular graphene subunits that exhibit color tunable visible light phosphorescence in the solid state and in the presence of air. The general mechanism of phosphorescence in these systems was probed experimentally and computationally via time-dependent density functional theory (TD-DFT). The incorporation of Te into π-extended oligoacene frameworks was achieved by an efficient Zr/Te transmetalation protocol; related zirconium-element exchange reactions have been used to prepare both electron-rich and electron-deficient heterocycles containing different elements from throughout the p-block. Therefore, the current study provides a clear path to incorporate inorganic elements into heteroacenes of greater complexity and side group selectivity compared to existing synthetic routes.

Near-infrared fluorescein dyes containing a tricoordinate boron atom

Tricoordinate boron imparts near-infrared absorption/emission and unusual multi-stage changes in the photophysical properties to fluorescein dyes.

Bora-fluoresceins (BFs), fluorescein analogues containing a tricoordinate boron atom instead of an oxygen atom at the 10-position of the fluorescein skeleton, were synthesized as a new family of fluorescein analogues. The deprotonated BFs exhibited absorption and fluorescence in the near-infrared region, which were significantly red-shifted relative to those of hitherto-known heteroatom-substituted fluorescein analogues on account of the orbital interaction between the tricoordinate boron atom and the fluorescein skeleton. BFs also showed multi-stage changes resulting from a Lewis acid–base equilibrium at the boron center in combination with a Brønsted acid–base equilibrium at the phenolic hydroxy group.

Tellurorhodamine photocatalyzed aerobic oxidation of organo-silanes and phosphines by visible-light

Tellurorhodamine, 9-mesityl-3,6-bis(dimethylamino)telluroxanthylium hexafluorophosphate (1), photocatalytically oxidizes aromatic and aliphatic silanes and triphenyl phosphine under mild aerobic conditions. Under irradiation with visible light, 1 can react with self-sensitized 1O2 to generate the active telluroxide oxidant (2). Silanes are oxidized to silanols and triphenyl phosphine is oxidized to triphenyl phoshine oxide either using 2, or 1 with aerobic irradiation. Kinetic experiments coupled with a computational study elucidate possible mechanisms of oxidation for both silane and phosphine substrates. First-order rates were observed in the oxidation of triphenyl phosphine and methyldiphenyl silane, indicating a substitution like mechanism for substrate binding to the oxidized tellurium(iv). Additionally, these reactions exhibited a rate-dependence on water. Oxidations were typically run in 50 : 50 water/methanol, however, the absence of water decreased the rates of silane oxidation to a greater degree than triphenyl phosphine oxidation. Parallel results were observed in solvent kinetic isotope experiments using D2O in the solvent mixture. The rates of oxidation were slowed to a greater degree in silane oxidation by 2 (kH/kD = 17.30) than for phosphine (kH/kD = 6.20). Various silanes and triphenyl phosphine were photocatalytically oxidized with 1 (5%) under irradiation with warm white LEDs using atmospheric oxygen as the terminal oxidant.

Synthesis of seminaphtho-phospha-fluorescein dyes based on the consecutive arylation of aryldichlorophosphines

Seminaphtho-phospha-fluorescein (SNAPF), a phosphine-oxide-containing unsymmetric fluorescein dye, was synthesized based on the consecutive arylation of PhPCl₂, followed by Friedel-Crafts cyclization. The resulting SNAPF exhibited several attractive photophysical properties including an intense fluorescence in the NIR region and a large Stokes shift.

Synthesis and reactions of 4H-1,4-telluraborine

The 4H-1,4-telluraborine is a shown to be a versatile reagent undergoing both protonolysis and hydroboration, affording a new range of 1,4-telluraborine derivatives.

Facile access to unsymmetrically substituted tellurium–boron based heterocycles

Protonolysis and alkyne exchange reactions are used to give unsymmetrically substituted Te–B based heterocycles.

Luminescence spectroscopy of chalcogen substituted rhodamine cations in vacuo

A library of fluorescent rhodamine cations has been characterized with view to their potential use in gas-phase structural biology experiments.

Bismuth-rhodamine: a new red light-excitable photosensitizer

A new red light-excitable photosensitizer, Bi-rhodamine, was developed.

Nebraska Red: a phosphinate-based near-infrared fluorophore scaffold for chemical biology applications

A series of novel phosphinate-based dyes displaying near-infrared fluorescence (NIR) are reported. These dyes exhibit remarkable photostability and brightness. The phosphinate functionality is leveraged as an additional reactive handle in order to tune cell permeability as well as provide a proof-of-principle for a self-reporting small molecule delivery vehicle.

Selective photodepletion of malignant T cells in extracorporeal photopheresis with selenorhodamine photosensitizers

Extracorporeal photopheresis (ECP) has been used successfully in the treatment of erythrodermic cutaneous T cell lymphoma (CTCL), and other T cell-mediated disorders. Not all patients obtain a significant or durable response from ECP. The design of a selective photosensitizer that spares desirable lymphocytes while targeting malignant T cells may promote cytotoxic T cell responses and improve outcomes after ECP. A series of selenorhodamines built with variations of the Texas red core targeted the mitochondria of malignant T cells, were phototoxic to malignant T cells presumably via their ability to generate singlet oxygen, and were transported by P-glycoprotein (P-gp). To determine the selectivity of the photosensitizers in the ECP milieu, staphylococcal enterotoxin B (SEB)-stimulated and non-stimulated human lymphocytes were combined with HUT-78 cells (a CTCL) to simulate ECP. The amide-containing analogues of the selenorhodamines were transported more rapidly than the thioamide analogues in monolayers of MDCKII-MDR1 cells and, consequently, were extruded more rapidly from P-gp-expressing T cells than the corresponding thioamide analogues. Selenorhodamine 6 with the Texas red core and a piperidylamide functionality was phototoxic to >90% of malignant T cells while sparing >60% of both stimulated and non-stimulated T cells. In the resting T cells, (63±7)% of the CD4+ T cell compartment, and (78±2.5)% of the CD8+ cytotoxic T cell population were preserved, resulting in an enrichment of healthy and cytotoxic T cells after photodepletion.

Phospha-fluorescein: a red-emissive fluorescein analogue with high photobleaching resistance

Phospha-fluorescein (POF), a phosphine oxide-containing analogue of fluorescein, was synthesized and its photophysical properties were examined. Compared with fluorescein and sila-fluorescein, POF displayed significantly red-shifted absorption and fluorescence as well as superior photobleaching resistance, while retaining the pH-responsive characteristics of fluorescein dyes.

Selenorhodamine Dye-Sensitized Solar Cells: Influence of Structure and Surface-Anchoring Mode on Aggregation, Persistence, and Photoelectrochemical Performance

A library of six selenorhodamine dyes (4-Se-9-Se) were synthesized, characterized, and evaluated as photosensitizers of TiO2 in dye-sensitized solar cells (DSSCs). The dyes were constructed around either a bis(julolidyl)- or bis(half-julolidyl)-modified selenoxanthylium core functionalized at the 9-position with a thienyl group bearing a carboxylic, hydroxamic, or phosphonic acid for attachment to TiO2. Absorption bands of solvated dyes 4-Se-9-Se were red-shifted relative to the dimethylamino analogues. The dyes adsorbed to TiO2 as mixtures of monomeric and H-aggregated dyes, which exhibited broadened absorption spectra and increased light-harvesting efficiencies relative to the solvated monomeric dyes. Carboxylic acid-bearing dyes 4-Se and 7-Se initially exhibited the highest incident photon-to-current efficiencies (IPCEs) of 65-80% under monochromatic illumination, but the dyes desorbed rapidly from TiO2 into solutions of HCl (0.1 M) in a CH3CN:H2O mixed solvent (120:1 v:v). The hydroxamic acid- and phosphonic acid-bearing dyes 5-Se, 6-Se, 8-Se, and 9-Se exhibited lower IPCEs (49-65%) immediately after preparation of DSSCs; however, the dyes were vastly more inert on TiO2, and IPCEs decreased only minimally with successive measurements under constant illumination. Power-conversion efficiencies (PCEs) of the selenorhodamine-derived DSSCs were less than 1%, probably due to inefficient regeneration of the dyes following electron injection. For a given anchoring group, the bis(half-julolidyl) dyes exhibited higher open-circuit photovoltages and PCEs than the corresponding bis(julolidyl) dyes. The hydroxamic acid- and phosphonic acid-bearing dyes are intriguing photosensitizers of TiO2 in light of their aggregation-induced spectral broadening, high monochromatic IPCEs, and relative inertness to desorption into acidic media.

Azobenzene-caged sulforhodamine dyes: a novel class of 'turn-on' reactive probes for hypoxic tumor cell imaging

New sulforhodamine-based fluorescent 'turn-on' probes have been developed for the direct imaging of cellular hypoxia. Rapid access to this novel class of water-soluble 'azobenzene-caged' fluorophores was made possible through an easily-implementable azo-coupling reaction between a fluorescent primary arylamine derived from a sulforhodamine 101 scaffold (named SR101-NaphtNH ₂ ) and a tertiary aniline whose N-substituents are neutral, cationic, or zwitterionic. The detection mechanism is based on the bioreductive cleavage of the azo bond that restores strong far-red fluorescence (emission maximum at 625 nm) by regenerating the original sulforhodamine SR101-NaphtNH ₂ . This valuable fluorogenic response was obtained for the three 'smart' probes studied in this work, as shown by an in vitro assay using rat liver microsomes placed under aerobic and then under hypoxic conditions. Most importantly, the probe namely SR101-NaphtNH ₂ -Hyp-diMe was successfully applied for imaging the hypoxic status of tumor cells (A549 cells).

Enhanced ratiometric fluorescent indicators for magnesium based on azoles of the heavier chalcogens

Red-shifted fluorescent indicators for magnesium were developed by incorporation of sulfur or selenium in the azole moiety of 'fura' fluorophores. Single atom replacement in the acceptor of these ITC probes affords longer excitation and emission wavelengths as well as greater separation between excitation bands, valuable for ratiometric intracellular Mg(2+) imaging.

Redox-Responsive Fluorescent Probes with Different Design Strategies

In an aerobic organism, reactive oxygen species (ROS) are an inevitable metabolic byproduct. Endogenously produced ROS have a significant role in physiological processes, but excess ROS can cause oxidative stress and can damage tissue. Cells possess elaborate mechanisms to regulate their internal redox status. The intracellular redox homeostasis plays an essential role in maintaining cellular function. However, moderate alterations in redox balance can accompany major transitions in a cell's life cycle. Because of the role of ROS in physiology and in pathology, researchers need new tools to study redox chemistry in biological systems.In recent years, researchers have made remarkable progress in developing new, highly sensitive and selective fluorescent probes that respond to redox changes, and in this Account we highlight related research, primarily from our own group. We present an overview of the design, photophysical properties, and fluorescence transduction mechanisms of reported molecules that probe redox changes. We have designed and synthesized a series of fluorescent probes for redox cycles in biological systems relying on the active center of glutathione peroxidase (GPx). We have also constructed probes based on the oxidation and reduction of hydroquinone and of 2,2,6,6-tetramethylpiperidinooxy (TEMPO). Most of these probes exhibit high sensitivity and good selectivity, absorb in the near-infrared, and respond rapidly. Such probes are useful for confocal fluorescence microscopy, a dynamic imaging technique that could allow researchers to observe biologically important ROS and antioxidants in real time. This technique and these probes provide potentially useful tools for exploring the generation, transport, physiological function, and pathogenic mechanisms of ROS and antioxidants.We also describe features that could improve the properties of redox-responsive fluorescent probes: greater photostability; rapid, dynamic, cyclic and ratiometric responses; and broader absorption in the near-IR region. In addition, fluorescent probes that include organochalcogens such as selenium and tellurium show promise for a new class of fluorescent redox probes that are both chemically stable and robustly reversible. However, further investigations of the chemical and fluorescence transduction mechanisms of selenium-based probes in response to ROS are needed.

Selenorhodamine photosensitizers for photodynamic therapy of P-glycoprotein-expressing cancer cells

We examined a series of selenorhodamines with amide and thioamide functionality at the 5-position of a 9-(2-thienyl) substituent on the selenorhodamine core for their potential as photosensitizers for photodynamic therapy (PDT) in P-glycoprotein (P-gp) expressing cells. These compounds were examined for their photophysical properties (absorption, fluorescence, and ability to generate singlet oxygen), for their uptake into Colo-26 cells in the absence or presence of verapamil, for their dark and phototoxicity toward Colo-26 cells, for their rates of transport in monolayers of multidrug-resistant, P-gp-overexpressing MDCKII-MDR1 cells, and for their colocalization with mitochondrial specific agents in Colo-26 cells. Thioamide derivatives 16b and 18b were more effective photosensitizers than amide derivatives 15b and 17b. Selenorhodamine thioamides 16b and 18b were useful in a combination therapy to treat Colo-26 cells in vitro: a synergistic therapeutic effect was observed when Colo-26 cells were exposed to PDT and treatment with the cancer drug doxorubicin.