Catalytic C–F Bond Hydrogenolysis of Fluoroaromatics by [(η5-C5Me5)RhI(2,2′-bipyridine)]

Twinned versus linked organometallics - bimetallic "half-baguette" pentalenide complexes of Rh(I)

The application of Mg[Ph4Pn] and Li·K[Ph4Pn] in transmetalation reactions to a range of Rh(I) precursors led to the formation of "half-baguette" anti-[RhI(L)n]2[μ:η5:η5Ph4Pn] (L = 1,5-cyclooctadiene, norbornadiene, ethylene; n = 1, 2) and syn-[RhI(CO)2]2[μ:η5:η5Ph4Pn] complexes as well as the related iridium complex anti-[IrI(COD)]2[μ:η5:η5Ph4Pn]. With CO exclusive syn metalation was obtained even when using mono-nuclear Rh(I) precursors, indicating an electronic preference for syn metalation. DFT analysis showed this to be the result of π overlap between the adjacent M(CO)2 units which overcompensates for dz2 repulsion of the metals, an effect which can be overridden by steric clash of the auxiliary ligands to yield anti-configuration as seen in the larger olefin complexes. syn-[RhI(CO)2]2[μ:η5:η5Ph4Pn] is a rare example of a twinned organometallic where the two metals are held flexibly in close proximity, but the two d8 Rh(I) centres did not show signs of M-M bonding interactions or exhibit Lewis basic behaviour as in some related mono-nuclear Cp complexes due to the acceptor properties of the ligands. The ligand substitution chemistry of syn-[RhI(CO)2]2[μ:η5:η5Ph4Pn] was investigated with a series of electronically and sterically diverse donor ligands (P(OPh)3, P(OMe)3, PPh3, PMe3, dppe) yielding new mono- and bis-substituted complexes, with E-syn-[RhI(CO)(P{OR})3]2[μ:η5:η5Ph4Pn] (R = Me, Ph) characterised by XRD.

Storing electrons from H2 for transfer to CO2, all at room temperature

We present an Ir complex that extracts electrons from H2 at room temperature and stores them as a H2-derived energy carrier (H2EC) at room temperature. Furthermore, we demonstrate that this complex reduces CO2 to a metal-CO22- species at room temperature, and present the first electrospray ionisation mass spectrum for this compound.

Computational Insights into the Influence of Ligands on Hydrogen Generation with [Cp*Rh] Hydrides

This work reports a computational investigation of the effect of ancillary ligands on the activity of an Rh catalyst for hydrogen evolution based on the [Cp*Rh] motif (Cp* = η⁵-pentamethylcyclopentadienyl). Specifically, we investigate why a bipyridyl (bpy) ligand leads to H₂ generation but diphenylphosphino-based (dpp) ligands do not. We compare the full ligands to simplified models and systematically vary structural features to ascertain their effect on the reaction energy of each catalytic step. The calculations based on density functional theory show that the main effect on reactivity is the choice of linker atom, followed by its coordination. In particular, P stabilizes the intermediate Rh-hydride species by donating electron density to the Rh, thus inhibiting the reaction toward H₂ generation. Conversely, N, a more electron-withdrawing center, favors H₂ generation at the price of destabilizing the hydride intermediate, which cannot be isolated experimentally and makes determining the mechanism of this reaction more difficult. We also find that the steric effects of bulky substituents on the main ligand scaffold can lead to large effects on the reactivity, which may be challenging to fine-tune. On the other hand, structural features like the bite angle of the bidentate ligand have a much smaller impact on reactivity. Therefore, we propose that the choice of linker atom is key for the catalytic activity of this species, which can be further fine-tuned by a proper choice of electron-directing groups on the ligand scaffold.

Mechanistic roles of metal- and ligand-protonated species in hydrogen evolution with [Cp*Rh] complexes

Protonation reactions involving organometallic complexes are ubiquitous in redox chemistry and often result in the generation of reactive metal hydrides. However, some organometallic species supported by η5-pentamethylcyclopentadienyl (Cp*) ligands have recently been shown to undergo ligand-centered protonation by direct proton transfer from acids or tautomerization of metal hydrides, resulting in the generation of complexes bearing the uncommon η4-pentamethylcyclopentadiene (Cp*H) ligand. Here, time-resolved pulse radiolysis (PR) and stopped-flow spectroscopic studies have been applied to examine the kinetics and atomistic details involved in the elementary electron- and proton-transfer steps leading to complexes ligated by Cp*H, using Cp*Rh(bpy) as a molecular model (where bpy is 2,2'-bipyridyl). Stopped-flow measurements coupled with infrared and UV-visible detection reveal that the sole product of initial protonation of Cp*Rh(bpy) is [Cp*Rh(H)(bpy)]+, an elusive hydride complex that has been spectroscopically and kinetically characterized here. Tautomerization of the hydride leads to the clean formation of [(Cp*H)Rh(bpy)]+. Variable-temperature and isotopic labeling experiments further confirm this assignment, providing experimental activation parameters and mechanistic insight into metal-mediated hydride-to-proton tautomerism. Spectroscopic monitoring of the second proton transfer event reveals that both the hydride and related Cp*H complex can be involved in further reactivity, showing that [(Cp*H)Rh] is not necessarily an off-cycle intermediate, but, instead, depending on the strength of the acid used to drive catalysis, an active participant in hydrogen evolution. Identification of the mechanistic roles of the protonated intermediates in the catalysis studied here could inform design of optimized catalytic systems supported by noninnocent cyclopentadienyl-type ligands.

A computational tool to accurately and quickly predict 19F NMR chemical shifts of molecules with fluorine-carbon and fluorine-boron bonds

We report the evaluation of density-functional-theory (DFT) based procedures for predicting ¹⁹F NMR chemical shifts at modest computational cost for a range of molecules with fluorine bonds, to be used as a tool for assisting the characterisation of reaction intermediates and products and as an aid to identifying mechanistic pathways. The results for a balanced learning set of molecules were then checked using two further testing sets, resulting in the recommendation of the ωB97XD/aug-cc-pvdz DFT method and basis set as having the best combination of accuracy and computational time, with a RMS error of 3.57 ppm. Cationic molecules calculated without counter-anion showed normal errors, whilst anionic molecules showed somewhat larger errors. The method was applied to the prediction of the conformationally averaged ¹⁹F chemical shifts of 2,2,3,3,4,4,5,5-octafluoropentan-1-ol, in which gauche stereoelectronic effects involving fluorine dominate and to determining the position of coordination equilibria of fluorinated boranes as an aid to verifying the relative energies of intermediate species involved in catalytic amidation reactions involving boron catalysts.

Regioselective Transfer Hydrogenative Defluorination of Polyfluoroarenes Catalyzed by Bifunctional Azairidacycle

The catalytic hydrodefluorination (HDF) with a bifunctional azairidacycle using HCOOK was examined for cyano- and chloro-substituted fluoroarenes, including penta- and tetrafluorobenzonitriles, tetrafluoroterephthalonitrile, tetrafluorophthalonitrile, 3-chloro-2,4,5,6-tetrafluoropyridine, and 4-cyano-2,3,5,6-tetrafluoropyridine. The reaction was performed in the presence of a controlled amount of HCOOK with a substrate/catalyst ratio (S/C) of 100 in a 1:1 mixture of 1,2-dimethoxyethane (DME) and H2O at an ambient temperature of 30 °C to obtain partially fluorinated compounds with satisfactory regioselectivities. The C–F bond cleavage proceeded favorably at the para position of substituents other than fluorine, which is in consonance with the nucleophilic aromatic substitution mechanism. In the HDF of tetrafluoroterephthalonitrile and 4-cyano-2,3,5,6-tetrafluoropyridine, which do not contain a fluorine atom at the para position of the cyano group, the double defluorination occurred solely at the 2- and 5-positions, as confirmed by X-ray crystallography. The HDF of 3-chloro-2,4,5,6-tetrafluoropyridine gave preference to the C–F bond cleavage over the C–Cl bond cleavage, unlike the dehalogenation pathway via electron-transfer radical anion fragmentation. In addition, new azairidacycles with an electron-donating methoxy substituent on the C–N chelating ligand were synthesized and served as a catalyst precursor (0.2 mol%) for the transfer hydrogenative defluorination of pentafluoropyridine, leading to 2,3,5,6-tetrafluoropyridine with up to a turnover number (TON) of 418.

Bismuth Redox Catalysis: An Emerging Main-Group Platform for Organic Synthesis

Bismuth has recently been shown to be able to maneuver between different oxidation states, enabling access to unique redox cycles that can be harnessed in the context of organic synthesis. Indeed, various catalytic Bi redox platforms have been discovered and revealed emerging opportunities in the field of main group redox catalysis. The goal of this perspective is to provide an overview of the synthetic methodologies that have been developed to date, which capitalize on the Bi redox cycling. Recent catalytic methods via low-valent Bi(II)/Bi(III), Bi(I)/Bi(III), and high-valent Bi(III)/Bi(V) redox couples are covered as well as their underlying mechanisms and key intermediates. In addition, we illustrate different design strategies stabilizing low-valent and high-valent bismuth species, and highlight the characteristic reactivity of bismuth complexes, compared to the lighter p-block and d-block elements. Although it is not redox catalysis in nature, we also discuss a recent example of non-Lewis acid, redox-neutral Bi(III) catalysis proceeding through catalytic organometallic steps. We close by discussing opportunities and future directions in this emerging field of catalysis. We hope that this Perspective will provide synthetic chemists with guiding principles for the future development of catalytic transformations employing bismuth.

Catalytic Hydrodefluorination via Oxidative Addition, Ligand Metathesis, and Reductive Elimination at Bi(I)/Bi(III) Centers

Herein, we report a hydrodefluorination reaction of polyfluoroarenes catalyzed by bismuthinidenes, Phebox-Bi(I) and OMe-Phebox-Bi(I). Mechanistic studies on the elementary steps support a Bi(I)/Bi(III) redox cycle that comprises C(sp²)-F oxidative addition, F/H ligand metathesis, and C(sp²)-H reductive elimination. Isolation and characterization of a cationic Phebox-Bi(III)(4-tetrafluoropyridyl) triflate manifests the feasible oxidative addition of Phebox-Bi(I) into the C(sp²)-F bond. Spectroscopic evidence was provided for the formation of a transient Phebox-Bi(III)(4-tetrafluoropyridyl) hydride during catalysis, which decomposes at low temperature to afford the corresponding C(sp²)-H bond while regenerating the propagating Phebox-Bi(I). This protocol represents a distinct catalytic example where a main-group center performs three elementary organometallic steps in a low-valent redox manifold.

Unraveling the Light-Activated Reaction Mechanism in a Catalytically Competent Key Intermediate of a Multifunctional Molecular Catalyst for Artificial Photosynthesis

Understanding photodriven multielectron reaction pathways requires the identification and spectroscopic characterization of intermediates and their excited‐state dynamics, which is very challenging due to their short lifetimes. To the best of our knowledge, this manuscript reports for the first time on in situ spectroelectrochemistry as an alternative approach to study the excited‐state properties of reactive intermediates of photocatalytic cycles. UV/Vis, resonance‐Raman, and transient‐absorption spectroscopy have been employed to characterize the catalytically competent intermediate [(tbbpy)₂Ru^II(tpphz)Rh^ICp*] of [(tbbpy)₂Ru(tpphz)Rh(Cp*)Cl]Cl(PF₆)₂ (Ru(tpphz)RhCp*), a photocatalyst for the hydrogenation of nicotinamide (NAD‐analogue) and proton reduction, generated by electrochemical and chemical reduction. Electronic transitions shifting electron density from the activated catalytic center to the bridging tpphz ligand significantly reduce the catalytic activity upon visible‐light irradiation.

Structural and chemical properties of half-sandwich rhodium complexes supported by the bis(2-pyridyl)methane ligand

[Cp*Rh] complexes (Cp* = pentamethylcyclopentadienyl) supported by bidentate chelating ligands are a useful class of compounds for studies of redox chemistry and catalysis. Here, we show that the bis(2-pyridyl)methane ligand, also known as dipyridylmethane or dpma, can support [Cp*Rh] complexes in the formally +iii and +ii rhodium oxidation states. Specifically, two new rhodium complexes ([Cp*Rh(dpma)(L)]ⁿ⁺, L = Cl^-, CH₃CN) have been isolated and structurally characterized, and the properties of the complexes have been compared with those of [Cp*Rh] complexes bearing the related dimethyldipyridylmethane (Me₂dpma) ligand. Complex [Cp*Rh(dpma)(NCCH₃)]²⁺ displays a quasireversible rhodium(iii/ii) reduction by cyclic voltammetry; related electron paramagnetic resonance (EPR) spectroscopic studies confirm access to the unusual rhodium(ii) oxidation state. Further reduction to the formally rhodium(i) oxidation state, however, is followed by deprotonation of dpma, as observed in electrochemical studies and chemical reduction experiments. This reactivity can be understood to occur as a consequence of the presence of doubly benzylic protons in the dpma ligand, since use of the analogous Me₂dpma enables reduction to rhodium(i) without involvement of ligand deprotonation. These findings highlight the important role of the ligand backbone substitution pattern in influencing the stability of highly-reduced complexes, a key class of metal species for study of electron and proton management in catalysis.

Multiple binding modes of an unconjugated bis(pyridine) ligand stabilize low-valent [Cp*Rh] complexes

An unconjugated bis(pyridine) ligand enables sequential one-electron reductions of a [Cp*Rh] complex, revealing the ligand's ability to stabilize low-valent species.

Silver-catalyzed intermolecular amination of fluoroarenes

A novel highly selective Ag-catalyzed intermolecular amination of fluoroarenes has been developed.

Ligand Substituents Govern the Efficiency and Mechanistic Path of Hydrogen Production with [Cp*Rh] Catalysts

We demonstrate that [Cp*Rh] complexes bearing substituted 2,2'-bipyridyl ligands are effective hydrogen evolution catalysts (Cp*=η⁵ -pentamethylcyclopentadienyl). Disubstitution (at the 4 and 4' positions) of the bipyridyl ligand (namely -tBu, -H, and -CF₃ ) modulates the catalytic overpotential, in part due to involvement of the reduced ligand character in formally rhodium(I) intermediates. These reduced species are synthesized and isolated here; protonation results in formation of complexes bearing the unusual η⁴ -pentamethylcyclopentadiene ligand, and the properties of these protonated intermediates further govern the catalytic performance. Electrochemical studies suggest that multiple mechanistic pathways are accessible, and that the operative pathway depends on the applied potential and solution conditions. Taken together, these results suggest synergy in metal-ligand cooperation that modulates the mechanisms of fuel-forming catalysis with organometallic compounds bearing multiple non-innocent ligands.

Product Selectivity in Homogeneous Artificial Photosynthesis Using [(bpy)Rh(Cp*)X]n+-Based Catalysts

Due to the limited amount of fossil energy carriers, the storage of solar energy in chemical bonds using artificial photosynthesis has been under intensive investigation within the last decades. As the understanding of the underlying working principle of these complex systems continuously grows, more focus will be placed on a catalyst design for highly selective product formation. Recent reports have shown that multifunctional photocatalysts can operate with high chemoselectivity, forming different catalysis products under appropriate reaction conditions. Within this context [(bpy)Rh(Cp*)X]n+-based catalysts are highly relevant examples for a detailed understanding of product selectivity in artificial photosynthesis since the identification of a number of possible reaction intermediates has already been achieved.

Highly Fluorinated Ir(III)-2,2':6',2″-Terpyridine-Phenylpyridine-X Complexes via Selective C-F Activation: Robust Photocatalysts for Solar Fuel Generation and Photoredox Catalysis

A series of fluorinated Ir(III)-terpyridine-phenylpyridine-X (X = anionic monodentate ligand) complexes were synthesized by selective C-F activation, whereby perfluorinated phenylpyridines were readily complexed. The combination of fluorinated phenylpyridine ligands with an electron-rich tri-tert-butyl terpyridine ligand generates a "push-pull" force on the electrons upon excitation, imparting significant enhancements to the stability, electrochemical, and photophysical properties of the complexes. Application of the complexes as photosensitizers for photocatalytic generation of hydrogen from water and as redox photocatalysts for decarboxylative fluorination of several carboxylic acids showcases the performance of the complexes in highly coordinating solvents, in some cases exceeding that of the leading photosensitizers. Changes in the photophysical properties and the nature of the excited states are observed as the compounds increase in fluorination as well as upon exchange of the ancillary chloride ligand to a cyanide. These changes in the excited states have been corroborated using density functional theory modeling.

Proton-hydride tautomerism in hydrogen evolution catalysis

Efficient generation of hydrogen from renewable resources requires development of catalysts that avoid deep wells and high barriers. Information about the energy landscape for H2 production can be obtained by chemical characterization of catalytic intermediates, but few have been observed to date. We have isolated and characterized a key intermediate in 2e(-) + 2H(+) → H2 catalysis. This intermediate, obtained by treatment of Cp*Rh(bpy) (Cp*, η(5)-pentamethylcyclopentadienyl; bpy, κ(2)-2,2'-bipyridyl) with acid, is not a hydride species but rather, bears [η(4)-Cp*H] as a ligand. Delivery of a second proton to this species leads to evolution of H2 and reformation of η(5)-Cp* bound to rhodium(III). With suitable choices of acids and bases, the Cp*Rh(bpy) complex catalyzes facile and reversible interconversion of H(+) and H2.

The selective activation of a C–F bond with an auxiliary strong Lewis acid: a method to change the activation preference of C–F and C–H bonds

Selective activations of C–F bond in substituted (2,6-difluorophenyl)phenylimines by Fe(PMe₃)₄ with an auxiliary strong Lewis acid were explored.

Stoichiometric and catalytic C–F bond activation by the trans-dihydride NHC complex [Ru(IEt2Me2)2(PPh3)2H2] (IEt2Me2= 1,3-diethyl-4,5-dimethylimidazol-2-ylidene)

Multiple catalytic hydrodefluorination steps take place with thetrans-dihydride complex [Ru(IEt₂Me₂)₂(PPh₃)₂H₂] (1), taking C₆F₆to tri-, di- and mono-fluorobenzenes.