Dithiocarbamates: Reagents for the Removal of Transition Metals from Organic Reaction Media

Site-Selective Palladium-catalyzed Oxidation of Unprotected Aminoglycosides and Sugar Phosphates

The site-selective modification of complex biomolecules by transition metal-catalysis is highly warranted, but often thwarted by the presence of Lewis basic functional groups. This study demonstrates that protonation of amines and phosphates in carbohydrates circumvents catalyst inhibition in palladium-catalyzed site-selective oxidation. Both aminoglycosides and sugar phosphates, compound classes that up till now largely escaped direct modification, are oxidized with good efficiency. Site-selective oxidation of kanamycin and amikacin was used to prepare a set of 3'-modified aminoglycoside derivatives of which two showed promising activity against antibiotic-resistant E. coli strains.

Ultrahigh activity and broad temperature resistance of amine-imine cobalt precatalysts for butadiene polymerization

A series of amine-imine cobalt complexes (Co1-Co7) has been prepared and characterized. The complexes Co3, Co4, and Co6 have a distorted tetrahedral geometry, as determined by single crystal X-ray diffraction. In the presence of ethylaluminum sesquichloride (EASC), Co3 exhibited ultra-high activity toward butadiene (Bd) polymerization (up to 7813 kgpolymer mol-1 h-1). The activity is higher than any yet recorded for which yield high cis-1,4 polybutadiene by the well-defined late-transition metal catalytic system. The catalyst also exhibited excellent tolerance towards the ratio of Co/Bd and broad temperature stability. At a ratio of Bd/Co3 = 50 000, the complexes Co1-3 can afford polybutadiene with yields higher than 96% within 2 hours. At -20 °C to 100 °C, the complex Co3 afforded relatively high polymer yields at low catalyst concentrations (Bd/Co3 = 25 000). In addition, all polymers showed a relatively high molecular weight (up to 1.06 × 106 g mol-1).

Solution-processable polymers of intrinsic microporosity for gas-phase carbon dioxide photoreduction

Four solution-processable, linear conjugated polymers of intrinsic porosity are synthesised and tested for gas phase carbon dioxide photoreduction. The polymers' photoreduction efficiency is investigated as a function of their porosity, optical properties, energy levels and photoluminescence. All polymers successfully form carbon monoxide as the main product, without the addition of metal co-catalysts. The best performing single component polymer yields a rate of 66 μmol h^-1 m^-2, which we attribute to the polymer exhibiting macroporosity and the longest exciton lifetimes. The addition of copper iodide, as a source of a copper co-catalyst in the polymers shows an increase in rate, with the best performing polymer achieving a rate of 175 μmol h^-1 m^-2. The polymers are active for over 100 h under operating conditions. This work shows the potential of processable polymers of intrinsic porosity for use in the gas phase photoreduction of carbon dioxide towards solar fuels.

Anion redox as a means to derive layered manganese oxychalcogenides with exotic intergrowth structures

Topochemistry enables step-by-step conversions of solid-state materials often leading to metastable structures that retain initial structural motifs. Recent advances in this field revealed many examples where relatively bulky anionic constituents were actively involved in redox reactions during (de)intercalation processes. Such reactions are often accompanied by anion-anion bond formation, which heralds possibilities to design novel structure types disparate from known precursors, in a controlled manner. Here we present the multistep conversion of layered oxychalcogenides Sr₂MnO₂Cu_1.5Ch₂ (Ch = S, Se) into Cu-deintercalated phases where antifluorite type [Cu_1.5Ch₂]^2.5- slabs collapsed into two-dimensional arrays of chalcogen dimers. The collapse of the chalcogenide layers on deintercalation led to various stacking types of Sr₂MnO₂Ch₂ slabs, which formed polychalcogenide structures unattainable by conventional high-temperature syntheses. Anion-redox topochemistry is demonstrated to be of interest not only for electrochemical applications but also as a means to design complex layered architectures.

Cross-linked dithiocarbamate-modified cellulose with enhanced thermal stability and dispersibility as a sorbent for arsenite removal

Numerous reports have described dithiocarbamate (DTC)-modified cellulose sorbents that can selectively separate metal ions from water. We have previously synthesized a novel sorbent modified with DTC containing N-heterocycles in the backbone for the selective removal of hazardous metal ions. The sorbent was found to partially dissolve and aggregate in solution, reducing its sorption capacity. In this study, to prepare the sorbent for use as a soli-phase extraction material for the removal of arsenite (As^III) ions, we attempted to decrease the solubility of the sorbent. The sorbent was cross-linked with epoxy or complexed with iron, and the quantities of the modifiers were varied between 3.0 and 10 mol%. As a result, the iron-complexed sorbents were still partially soluble, and cross-linkage with 6.0 mol% of epoxy made the sorbent almost insoluble and dispersed in solution. This sorbent also exhibited the highest As^III sorption performance among the sorbents synthesized in this study. Although DTC-modified polymers are reported to lose their sorption capability after storage at 40 °C, the sorbent was found to be thermally stable. The optimum contact time and pH for As^III removal were 20 min and 3.0, respectively. The maximum sorption capacity of the epoxy-cross-linked sorbent, calculated from the Langmuir isotherm equation, was 600 μmol g^-1 (45 mg g^-1) at 25 °C. Additionally, the sorbent was highly selective toward As^III compared with previously reported sorbents and capable of removing approximately 97% of As^III from environmental water. In conclusion, cross-linking enhances the stability of the sorbents in solutions, which facilitates the removal of As^III from environmental water.

Multicomponent Synthesis of S-Benzyl Dithiocarbamates from para-Quinone Methides and Their Biological Evaluation for the Treatment of Alzheimer's Disease

Multicomponent synthesis of biologically relevant S-benzyl dithiocarbamates from para-quinone methides, amines, and carbon disulfide are described under catalyst and additive-free conditions. The reactions proceeded at room temperature in a short span of time with excellent yields. One of the synthesized compounds, 3e showed considerable acetylcholinesterase (AChE) inhibitory (51.70 + 5.63% at 20 μm) and antioxidant (63.52 ± 1.15 at 20 μm) activities.

The new life of traditional water treatment flocculant polyaluminum chloride (PAC): a green and efficient micro-nano reactor catalyst in alcohol solvents

Polyaluminum chloride (PAC) is an inorganic polymer material that has the advantages of a simple preparation process and special electronic structure. It is considered to be the most efficient and widely used flocculation material for water treatment. In this work, PAC has been used as a Lewis acid catalyst in interdisciplinary fields because of its polynuclear Al-O cation structure. Further, its catalytic mechanism in green organic synthesis has been studied in detail by using the multicomponent Biginelli reaction as the probe. The effect of solvent on the self-assembly and aggregation process of PAC materials was investigated using optical microscopy, UV-Vis spectrophotometry, particle size analysis, XPS, IR, SEM and HR-TEM. The results show that the PAC materials have different morphological characteristics in different solvents. The Al-O-Al cations were transformed in the ethanol solvent to form new multi-nuclear cation aggregates Alb, which could be used as inorganic micro-nano reactors with unique synergistic catalysis in catalytic reactions. This is the first time the role of PAC in the Biginelli reaction has been analyzed with a liquid in situ infrared instrument, which provided favorable evidence for the speculated reaction mechanism. The PAC-ethanol system is, therefore, considered to be a green, efficient (best yield >99%), economic and recyclable catalyst for catalyzing organic synthesis reactions. The development and utilization of PAC materials in organic synthesis will bring new vitality to this cheap material, which is widely used in industries.

Total Syntheses of Pladienolide-Derived Spliceosome Modulators

Pladienolides, an emerging class of naturally occurring spliceosome modulators, exhibit interesting structural features, such as highly substituted 12-membered macrocycles and epoxide-containing diene side chains. The potential of pladienolides as anti-cancer agents is confirmed by H3B-8800, a synthetic analog of this natural product class, which is currently under Phase I clinical trials. Since its isolation in 2004 and the first total synthesis in 2007, a dozen total syntheses and synthetic approaches toward the pladienolide class have been reported to date. This review focuses on the eight completed total syntheses of naturally occurring pladienolides or their synthetic analogs, in addition to a synthetic approach to the main framework of the natural product.

Copper Dithiocarbamates: Coordination Chemistry and Applications in Materials Science, Biosciences and Beyond

Copper dithiocarbamate complexes have been known for ca. 120 years and find relevance in biology and medicine, especially as anticancer agents and applications in materials science as a single-source precursor (SSPs) to nanoscale copper sulfides. Dithiocarbamates support Cu(I), Cu(II) and Cu(III) and show a rich and diverse coordination chemistry. Homoleptic [Cu(S2CNR2)2] are most common, being known for hundreds of substituents. All contain a Cu(II) centre, being either monomeric (distorted square planar) or dimeric (distorted trigonal bipyramidal) in the solid state, the latter being held together by intermolecular C···S interactions. Their d9 electronic configuration renders them paramagnetic and thus readily detected by electron paramagnetic resonance (EPR) spectroscopy. Reaction with a range of oxidants affords d8 Cu(III) complexes, [Cu(S2CNR2)2][X], in which copper remains in a square-planar geometry, but Cu–S bonds shorten by ca. 0.1 Å. These show a wide range of different structural motifs in the solid-state, varying with changes in anion and dithiocarbamate substituents. Cu(I) complexes, [Cu(S2CNR2)2]−, are (briefly) accessible in an electrochemical cell, and the only stable example is recently reported [Cu(S2CNH2)2][NH4]·H2O. Others readily lose a dithiocarbamate and the d10 centres can either be trapped with other coordinating ligands, especially phosphines, or form clusters with tetrahedral [Cu(μ3-S2CNR2)]4 being most common. Over the past decade, a wide range of Cu(I) dithiocarbamate clusters have been prepared and structurally characterised with nuclearities of 3–28, especially exciting being those with interstitial hydride and/or acetylide co-ligands. A range of mixed-valence Cu(I)–Cu(II) and Cu(II)–Cu(III) complexes are known, many of which show novel physical properties, and one Cu(I)–Cu(II)–Cu(III) species has been reported. Copper dithiocarbamates have been widely used as SSPs to nanoscale copper sulfides, allowing control over the phase, particle size and morphology of nanomaterials, and thus giving access to materials with tuneable physical properties. The identification of copper in a range of neurological diseases and the use of disulfiram as a drug for over 50 years makes understanding of the biological formation and action of [Cu(S2CNEt2)2] especially important. Furthermore, the finding that it and related Cu(II) dithiocarbamates are active anticancer agents has pushed them to the fore in studies of metal-based biomedicines.

A New Scalable Synthesis of ELQ-300, ELQ-316, and other Antiparasitic Quinolones

The Endochin-Like Quinolone (ELQ) compound class may yield effective, safe treatments for a range of important human and animal afflictions. However, to access the public health potential of this compound series, a synthetic route needed to be devised that lowers costs and is amenable to large scale production. In the new synthetic route described here, a substituted β-keto ester, formed by an Ullmann reaction and subsequent acylation, is reacted with an aniline via a Conrad-Limpach reaction to produce 3-substituted 4(1H)-quinolones such as ELQ-300 and ELQ-316. This synthetic route, the first described to be truly amenable to industrial scale production, is relatively short (5 reaction steps), does not require palladium, chromatographic separation or protecting group chemistry, and may be performed without high vacuum distillation.

Expedient Total Syntheses of Pladienolide-Derived Spliceosome Modulators

Atom and step economical total syntheses of spliceosome modulating natural products pladienolides A and B are described. The strategic functionalization of an unsaturated macrolide precursor enabled the most concise syntheses of these natural products to date and provides convenient, flexible access to stereodefined macrolides to streamline medicinal chemistry explorations. Notably, this synthetic route does not depend on protecting group manipulations that traditionally define synthesis planning for polyhydroxylated natural products of polyketide origin. Its utility is further demonstrated by the enantioselective total synthesis of H3B-8800, a hitherto semisynthetic pladienolide-derived spliceosome modulator undergoing clinical trials for hematological malignancies.

Multicomponent Polymerizations Involving Green Monomers

Green monomers, such as oxygen (O₂ ), water (H₂ O), and carbon dioxide (CO₂ ), refer to a kind of natural reagents with abundant, nontoxic, cheap, environmentally friendly, renewable, and sustainable features. These monomers have been used in multicomponent polymerizations (MCPs) toward functional polymers. In this review, the recent development of MCPs involving green monomers of O₂ -, H₂ O-, and CO₂ is summarized. The catalytic systems, polymerization conditions, the molecular weights, and potential applications of resultant polymers are briefly discussed. Furthermore, the existing challenges and the promising opportunities are concisely provided.

Dithiocarbamate-modified cellulose-based sorbents with high storage stability for selective removal of arsenite and hazardous heavy metals

A series of cellulose derivatives bearing dialkyl dithiocarbamate (DTC) groups were synthesized. Their ability of sorption of arsenite (As(iii)) and heavy metals and their storage stability in the solid state were investigated. Among them, DTC-modified cellulose derived from l-proline showed the highest sorption capacity for As(iii) and heavy metals to selectively remove them from aqueous media. It also showed exellent storage stability in air at 40 °C.

Dithiocarbamate-modified cellulose derived from l-proline works as a storable sorbent for selective removal of toxic As(iii) and heavy metals from aqueous media.

An isocyanide ligand for the rapid quenching and efficient removal of copper residues after Cu/TEMPO-catalyzed aerobic alcohol oxidation and atom transfer radical polymerization

Three for the price of one: 1,4-bis(3-isocyanopropyl)piperazine allows for the removal of Cu impurities, can quench Cu-catalyzed reactions, and can prevent undesirable Glaser coupling.

Synthesis, Crystal Structure, and Selected Properties of [Au(S2 CNH2 )2 ]SCN: A Precursor for Gold Macro-Needles Consisting of Gold Nanoparticles Glued by Graphitic Carbon Nitride

A new preparation route is developed for the synthesis of needle-like crystals of [Au(S₂ CNH₂ )₂ ]SCN, which avoids disproportionation of the Au^I salt used as a starting material. In the crystal structure, the two crystallographically independent Au^III centers are in a square-planar environment of two S₂ CNH₂ ligands. The Hirshfeld surface analysis reveals the presence of noncovalent intermolecular S⋅⋅⋅S interactions, which are essential for the spatial arrangement of the molecules. Density functional theory (DFT) calculations including dispersion and damping corrections result in a unit cell volume very close to the value determined experimentally. Thermal decomposition in an inert atmosphere generates black needles with lengths of up to 500 μm. X-ray powder diffraction and pair distribution function analyses demonstrate that the needles are composed of nanosized crystals with a volume-weighted average domain size of 20(1) nm. According to results of X-ray photoemission experiments, the black needles are covered by a nitrogen-rich carbon nitride with composition near (CN)₂ N. ¹³ C solid-state NMR investigations indicate that two different carbon species are present, with signals corresponding well to heptazine units as in melon and triazine units as in poly(triazin imide) type compounds. Scanning transmission electron microscopy tomography evidences that the needles are composed of slightly elongated nanoparticles.

Functionalized Polyisobutylene and Liquid/Liquid Separations as a Method for Scavenging Transition Metals from Homogeneously Catalyzed Reactions

Ethanedithiol-functionalized polyisobutylene was prepared in one step by a photoinitiated thiol-ene “click” reaction starting from ethanedithiol and polyisobutylene (PIB). The functionalized oligomer product was then used as a soluble sequestrant for transition metals. This PIB-bound thioether-thiol ligand is phase selectively soluble in alkanes and it quantitatively sequesters common transition metals like Cu2+ and Pd2+ into an alkane phase, separating them from polar solvents in a biphasic liquid/liquid separation. The chelating thioether-thiol ligand was also successfully used to remove Cu and Pd transition metal catalyst residues from products in crude reaction mixtures in both azide/alkyne click reactions and cross-coupling reactions using a liquid/liquid extraction. Separation efficiencies exceeding 95% and in many cases 99% were achieved.

Synthesis of Indoles via Electron-Catalyzed Intramolecular C-N Bond Formation

A new protocol for the preparation of N-substituted indole-3-carboxylates has been developed. The key C-N bond formation occurs under transition-metal-free conditions employing a t-BuOK/DMF system without special initiators or additives. Across a number of substrates, indoles were afforded in yields higher or comparable to those obtained under transition-metal-catalyzed conditions. While demonstrating high functional group tolerance, new conditions are particularly attractive for manufacturing halogenated indoles that cannot be made in a pure form using other metal-based catalytic methods.

Catalytic Modification of Dehydroalanine in Peptides and Proteins by Palladium-Mediated Cross-Coupling

Dehydroalanine (Dha) is a remarkably versatile non‐canonical amino acid often found in antimicrobial peptides. Herein, we present the catalytic modification of Dha by a palladium‐mediated cross‐coupling reaction. By using Pd(EDTA)(OAc)₂ as water‐soluble catalyst, a variety of arylboronic acids was coupled to the dehydrated residues in proteins and peptides, such as Nisin. The cross‐coupling reaction gave both the Heck product, in which the sp²‐hybridisation of the α‐carbon is retained, as well as the conjugated addition product. The reaction can be performed under mild aqueous conditions, which makes this method an attractive addition to the palette of bio‐orthogonal catalytic methods.

Functionalization of boron-doped diamond with a push–pull chromophore via Sonogashira and CuAAC chemistry

Functionalization of boron-doped diamond with a push–pull chromophore via Sonogashira cross-coupling affords better photovoltaic performances as compared to functionalization via CuAAC.

fac-Aceto-nitrile-tricarbon-yl(di-methyl-carbamodi-thio-ato-κ2S,S')rhenium(I): crystal structure and Hirshfeld surface analysis

The title compound, [Re(C3H6NS2)(C2H3N)(CO)3], features an octa-hedrally coordinated ReI atom within a C3NS2 donor set defined by three carbonyl ligands in a facial arrangement, an aceto-nitrile N atom and two S atoms derived from a symmetrically coordinating di-thio-carbamate ligand. In the crystal, di-thio-carbamate-methyl-H⋯O(carbon-yl) inter-actions lead to supra-molecular chains along [36-1]; both di-thio-carbamate S atoms participate in intra-molecular methyl-H⋯S inter-actions. Further but weaker aceto-nitrile-C-H⋯O(carbonyl) inter-actions assemble mol-ecules in the ab plane. The nature of the supra-molecular assembly was also probed by a Hirshfeld surface analysis. Despite their weak nature, the C-H⋯O contacts are predominant on the Hirshfeld surface and, indeed, on those of related [Re(CO)3(C3H6NS2)L] structures.

Aerobic Copper-Mediated Domino Three-Component Approach to 2-Aminobenzothiazole Derivatives

An unprecedented three-component reaction involving a 2,2'-diaminodiaryl disulfide, copper cyanide, and an electrophile is described. This transformation is based on an oxidative copper-mediated S-cyanation as a key step and involves a cyanation/cyclization/acylation domino sequence enabling a rapid and efficient synthesis of diversely substituted 2-aminobenzothiazole derivatives. Notably, this reaction proceeds via an original mechanism involving an intermolecular migration of the acyl group.