Copper ions interfere with the reduction of the water-soluble tetrazolium salt-8

Ammonium tetrathiomolybdate relieves oxidative stress in cisplatin-induced acute kidney injury via NRF2 signaling pathway

Cisplatin is an efficient chemotherapeutic agent for various solid tumors, but its usage is restricted by nephrotoxicity. A single dose of cisplatin can cause acute kidney injury (AKI), which is characterized by rapid reduction in kidney function. However, the current therapies, such as hydration, are limited. It is vital to develop novel therapeutic reagents that have both anticancer and renoprotective properties. The objective of this study was to determine whether ammonium tetrathiomolybdate (TM), a copper chelator used to treat cancer and disorders of copper metabolism, may offer protection against cisplatin-induced AKI. In this study, we demonstrated that TM treatment had antioxidative effects and mitigated cisplatin-induced AKI both in vivo and in vitro. Mechanically, TM inhibited NRF2 ubiquitination, which activated the NRF2 pathway in HK-2 cells and promoted the expression of target genes. It should be noted that the protective effect conferred by TM against cisplatin was compromised by the knockdown of the NRF2 gene. Furthermore, TM selectively activated the NRF2 pathways in the liver and kidney. The current study provided evidence for additional clinical applications of TM by showing that it activates NRF2 and has a favorable therapeutic impact on cisplatin-induced AKI.

Variation in pentose phosphate pathway-associated metabolism dictates cytotoxicity outcomes determined by tetrazolium reduction assays

Tetrazolium reduction and resazurin assays are the mainstay of routine in vitro toxicity batteries. However, potentially erroneous characterization of cytotoxicity and cell proliferation can arise if verification of baseline interaction of test article with method employed is neglected. The current investigation aimed to demonstrate how interpretation of results from several standard cytotoxicity and proliferation assays vary in dependence on contributions from the pentose phosphate pathway (PPP). Non-tumorigenic Beas-2B cells were treated with graded concentrations of benzo[a]pyrene (B[a]P) for 24 and 48 h prior to cytotoxicity and proliferation assessment with commonly used MTT, MTS, WST1, and Alamar Blue assays. B[a]P caused enhanced metabolism of each dye assessed despite reductions in mitochondrial membrane potential and was reversed by 6-aminonicotinamide (6AN)-a glucose-6-phosphate dehydrogenase inhibitor. These results demonstrate differential sensitivity of standard cytotoxicity assessments on the PPP, thus (1) decoupling "mitochondrial activity" as an interpretation of cellular formazan and Alamar Blue metabolism, and (2) demonstrating the implicit requirement for investigators to sufficiently verify interaction of these methods in routine cytotoxicity and proliferation characterization. The nuances of method-specific extramitochondrial metabolism must be scrutinized to properly qualify specific endpoints employed, particularly under the circumstances of metabolic reprogramming.

In-vivo processing of nanoassemblies: a neglected framework for recycling to bypass nanotoxicological therapeutics

The proof-of-concept of nanomaterials (NMs) in the fields of imaging, diagnosis, treatment, and theranostics shows the importance in biopharmaceuticals development due to structural orientation, on-targeting, and long-term stability. However, biotransformation of NMs and their modified form in human body via recyclable techniques are not explored owing to tiny structures and cytotoxic effects. Recycling of NMs offers advantages of dose reduction, re-utilization of the administered therapeutics providing secondary release, and decrease in nanotoxicity in human body. Therefore, approaches like in-vivo re-processing and bio-recycling are essential to overcome nanocargo system-associated toxicities such as hepatotoxicity, nephrotoxicity, neurotoxicity, and lung toxicity. After 3-5 stages of recycling process of some NMs of gold, lipid, iron oxide, polymer, silver, and graphene in spleen, kidney, and Kupffer's cells retain biological efficiency in the body. Thus, substantial attention towards recyclability and reusability of NMs for sustainable development necessitates further advancement in healthcare for effective therapy. This review article outlines biotransformation of engineered NMs as a valuable source of drug carriers and biocatalyst with critical strategies like pH modification, flocculation, or magnetization for recovery of NMs in the body. Furthermore, this article summarizes the challenges of recycled NMs and advances in integrated technologies such as artificial intelligence, machine learning, in-silico assay, etc. Therefore, potential contribution of NM's life-cycle in the recovery of nanosystems for futuristic developments require consideration in site-specific delivery, reduction of dose, remodeling in breast cancer therapy, wound healing action, antibacterial effect, and for bioremediation to develop ideal nanotherapeutics.

Cellular mechanisms of biodegradable zinc and magnesium materials on promoting angiogenesis

Biodegradable metals, zinc and magnesium, have been regarded as next-generation, biomedical implant materials to promote tissue repair and regeneration. These implants might also promote the vascularization of surrounding neotissue. Released metallic ions, Zn²⁺ and Mg²⁺, show promise in vitro to implement vessel growth by stimulating the expression of pro-angiogenic cytokines, yet there is little known regarding how cellular responses transcend to influence the tissue environment. This study serves to optimize angiogenic behavior using EA.hy926 endothelial cultures exposed to Zn²⁺ and Mg²⁺ gradients and observe the translation of these effects on blood vessel development via the in ovo chorioallantoic membrane (CAM) assay. Findings indicate that Zn²⁺ 10 μM and Mg²⁺ 10 mM instigate the most prominent effects using endothelial cultures via scratch wound and tube formation assays, yet higher concentrations at Zn²⁺ 50 μM and Mg²⁺ 50 mM encourage significant angiogenesis along the CAM. Immunoblotting results also conclude the presence and upregulation of cytokines involved in vessel growth. Optimizing the angiogenic potential of Zn²⁺ and Mg²⁺ separately sheds light to design future engineering constructs for promoting blood vessel development and successful assimilation between host and implant tissue.

Redox active or thiol reactive? Optimization of rapid screens to identify less evident nuisance compounds

Compounds that exhibit assay interference or undesirable mechanisms of bioactivity are routinely encountered in assays at various stages of drug discovery. We observed that assays for the investigation of thiol-reactive and redox-active compounds have not been collected in a comprehensive review. Here, we review these assays and subject them to experimental optimization to improve their reliability. We demonstrate the usefulness of our assay cascade by assaying a library of bioactive compounds, chemical probes, and a set of approved drugs. These high-throughput assays should complement the array of wet-lab and in silico assays during the initial stages of hit discovery campaigns to pursue only hit compounds with tractable mechanisms of action. Teaser: We provide an overview of assays to detect redox active and thiol reactive compounds and the robust protocols for identification of nuisance compounds during early stages of drug discovery programs.

Limitation of Water-Soluble Tetrazolium Salt for the Cytocompatibility Evaluation of Zinc-Based Metals

Zinc (Zn) and its alloys have been regarded as promising biodegradable metals. The standardized cytotoxicity evaluation is a mandatory step to screen the biocompatibility of novel Zn and its alloys. Nevertheless, the suitability of the tetrazolium-based assay in the direct contact test for some metallic biomaterials (i.e., magnesium and manganese) is questionable. In this study, our results demonstrate an obvious inconsistency between qualitative observation via fluorescence staining and quantitative assessment using water-soluble tetrazolium salt (CCK-8). Subsequent experiments revealed that Zn and pre-treated Zn can directly convert tetrazolium salts to formazan, falsifying the cytotoxicity results. Therefore, we conclude that the CCK-8 assay is not suitable for evaluating the cytotoxicity of biodegradable Zn-based metals in the direct contact test.

Commentary: Revisiting nanoparticle-assay interference: There's plenty of room at the bottom for misinterpretation

Engineered nanomaterials (ENMs) are a diverse class of materials whose distinct properties make them desirable in a multitude of applications. The proliferation of nanotoxicology research has improved our understanding of ENM toxicity, but an under appreciation for their potential to interfere with biochemical assays has hampered progress in the field. The physicochemical properties of ENMs can promote their interaction with membranes or biomacromolecules (e.g. proteins, genomic material). This can influence the activity of enzymes used as biomarkers or as reagents in biochemical assay protocols, bind indicator dyes in cytotoxicity tests, and/or interfere with the cellular mechanisms controlling the uptake of such dyes. The spectral characteristics of some ENMs can cause interference with common assay chromophores, fluorophores, and radioisotope scintillation cocktails. Finally, the inherent chemical reactivity of some ENMs can short circuit assay mechanisms by directly oxidizing or reducing indicator dyes. These processes affect data quality and may lead to significant misinterpretations regarding ENM safety. We provide an overview of some ENM properties that facilitate assay interference, examples of interference and the erroneous conclusions that may result from it, and a number of general and specific recommendations for validating cellular and biochemical assay protocols in nanotoxicology studies.

Anti-caries effect of resin infiltrant modified by quaternary ammonium monomers

OBJECTIVES

Resin infiltrant is used in early enamel caries. However, commercial resin infiltrant lacks persistent antibacterial activity. Dimethylaminododecyl methacrylate (DMADDM) was added to resin infiltrant to give it sustainable antibacterial properties and inhibit demineralization.

METHODS

After the application of resin infiltrant to bovine enamel, cytotoxicity, surface roughness, and aesthetics were assessed. A multi-species biofilm was incubated on the enamel disk before and one month after microbial-aging. After a 48-h anaerobic incubation, biomass accumulation, metabolic activity, and lactic acid were analyzed using a crystal violet assay, an MTT (3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, and a lactic acid assay. Biofilm structure and composition were determined by live/dead staining, exopolysaccharide (EPS) staining, scanning electron microscopy (SEM), and quantitative polymerase chain reaction (qPCR). The depth and content of demineralization were tested by transverse microradiography (TMR).

RESULTS

Incorporating DMADDM did not increase the cytotoxicity or change the physical properties when the mass fraction of the DMADDM was 2.5-10 %. The modification decreased the amount of bacterial biofilm, metabolic activity, lactic acid production, EPS, and the proportion of Streptococcus mutans in the biofilms. It also provided anti-demineralization effects. The surface roughness and antibacterial ability were not changed after one month of microbial-aging.

CONCLUSION

The incorporation of DMADDM improved the antibacterial and anti-demineralization effects of the material. It demonstrated a sustained antibacterial effect.

CLINICAL SIGNIFICANCE

The antibacterial modification might be a potential choice for future clinical applications to inhibit early enamel caries.

Toxicity and Gene Expression Profiling of Copper- and Titanium-Based Nanoparticles Using Air-Liquid Interface Exposure

To assess the toxicity of nanomaterials, most in vitro studies have been performed under submerged conditions, which do not reflect physiological conditions upon inhalation. An air-liquid interface (ALI) exposure may provide more reliable data on dosimetry and prevent interactions with cell culture media components. Therefore, an ALI exposure was combined with a high-throughput RT-qPCR approach to evaluate the toxicological potential of CuO and TiO₂ nanoparticles (NP) in A549 cells. While TiO₂ NP did not show any cytotoxicity or other effects compromising genomic stability up to 25.8 μg/cm², CuO NP revealed a dose-dependent cytotoxicity, starting at 4.9 μg/cm². Furthermore, CuO NP altered distinct gene expression patterns indicative for disturbed metal homeostasis, stress response, and DNA damage induction. Thus, induction of metal homeostasis associated genes (MT1X, MT2A) at 0.4 μg/cm² and higher suggested uptake and intracellular dissolution of CuO NP, which was verified by a dose-dependent increase in intracellular copper concentration. Starting at 4.9 μg/cm², oxidative stress markers (HMOX1, HSPA1A) were induced dose-dependently, supported by elevated ROS levels. Furthermore, a dose-dependent induction of genes associated with DNA damage response (DDIT3, GADD45A) was observed, in concordance with an increase in DNA strand breaks. Finally, transcriptional data suggested the induction of apoptosis at high doses, while flow cytometric analysis revealed increased numbers of either late apoptotic or necrotic cells and clearly necrotic cells at the highest concentrations. Thus, an ALI cell culture system was successfully combined with a comprehensive high-throughput RT-qPCR system, allowing the quantification of NP deposition and their impact on genomic stability. For CuO NP, in principle the data confirm observations made under submerged conditions with respect to intracellular copper ion release, as well as oxidative and genotoxic stress response. However, the results derived from ALI exposure allow the assessment of dose-response-relationships as well as the comparison of relative toxic potencies of different NP.

Impact of Endocytosis and Lysosomal Acidification on the Toxicity of Copper Oxide Nano- and Microsized Particles: Uptake and Gene Expression Related to Oxidative Stress and the DNA Damage Response

The toxicity of the copper oxide nanoparticles (CuO NP) has been attributed to the so-called "Trojan horse"-type mechanism, relying on the particle uptake and extensive intracellular release of copper ions, due to acidic pH in the lysosomes. Nevertheless, a clear distinction between extra- and intracellular-mediated effects is still missing. Therefore, the impact of the endocytosis inhibitor hydroxy-dynasore (OH-dyn), as well as bafilomycin A1 (bafA1), inhibiting the vacuolar type H⁺-ATPase (V-ATPase), on the cellular toxicity of nano- and microsized CuO particles, was investigated in BEAS 2 B cells. Selected endpoints were cytotoxicity, copper uptake, glutathione (GSH) levels, and the transcriptional DNA damage and (oxidative) stress response using the high-throughput reverse transcription quantitative polymerase chain reaction (RT-qPCR). OH-dyn markedly reduced intracellular copper accumulation in the cases of CuO NP and CuO MP; the modulation of gene expression, induced by both particle types affecting especially HMOX1, HSPA1A, MT1X, SCL30A1, IL8 and GADD45A, were completely abolished. BafA1 lowered the intracellular copper concentration in case of CuO NP and strongly reduced transcriptional changes, while any CuO MP-mediated effects were not affected by bafA1. In conclusion, the toxicity of CuO NP depended almost exclusively upon dynamin-dependent endocytosis and the intracellular release of redox-active copper ions due to lysosomal acidification, while particle interactions with cellular membranes appeared to be not relevant.

Thin Degradable Coatings for Optimization of Osteointegration Associated with Simultaneous Infection Prophylaxis

One of the most common causes of implant failure is aseptic prosthesis loosening. Another frequent complication after prosthesis implant is the microbial colonization of the prosthesis surface, which often leads to a replacement of the prosthesis. One approach to reduce these complications is the application of bioactive substances to implant surfaces. Both an antibiotic prophylaxis and a faster osteointegration can be obtained by incorporation of bactericidal active metals in degradable calcium phosphate (CaP) coatings. In this study, thin degradable calcium phosphate ceramic coatings doped with silver (Ag), copper (Cu), and bismuth (Bi) on a titanium substrate were prepared with the aid of the high-velocity suspension flame spraying (HVSFS) coating process. To characterize the samples surface roughness, brightfield microscopy of the coatings, X-ray diffraction (XRD)-analysis for definition of the phase composition of the layers, Raman spectroscopy for determination of the phase composition of the contained metals, element-mapping for Cu-content verification, release kinetics for detection of metal ions and ceramic components of the coatings were carried out. The aim of this study was to evaluate in vitro biocompatibility and antimicrobial activity of the coatings. For biocompatibility testing, growth experiments were performed using the cell culture line MG-63. Cell viability was investigated by Giemsa staining and live/dead assay. The WST-1 kit was used to quantify cell proliferation and vitality in vitro and the lactate dehydrogenase (LDH) kit to quantify cytotoxicity. The formation of hydroxyapatite crystals in simulated body fluid was investigated to predict bioactivity in vivo. The Safe Airborne Antibacterial Assay with Staphylococcus aureus (S. aureus) was used for antimicrobial testing. The results showed good biocompatibility of all the metal doped CaP coatings, furthermore Cu and Ag doped layers showed significant antibacterial effects against S. aureus.

Inflammation and dysfunction in human aortic endothelial cells associated with poly-l-lactic acid degradation in vitro are alleviated by curcumin

Poly-l-lactic acid (PLLA) is widely used in clinic, for example, as biodegradable coronary artery stents. However, inflammatory responses in endothelial cells associated with PLLA degradation are relatively undefined. We previously reported inflammation in human aortic endothelial cells (HAEC) in vitro and in vivo. Here, we further assessed inflammatory injury, including cell migration, cell function, and inflammatory cytokines expressed in HAEC treated with PLLA and curcumin by CCK-8, wound healing assay, ELISA, and Western blot. Significant inhibition of cell migration, remarkable dysfunction, and inflammatory responses were found in HAEC treated with PLLA degradation extract, and these effects were alleviated by Cur treatment. These findings indicated that cautious evaluation of biodegradable polymers should be performed, and Cur represents a promising anti-inflammatory agent for alleviating endothelial dysfunction and inflammation caused by PLLA degradation. In addition, Cur should be further studied experimentally in in vivo experiments on animal models as a potential therapeutic to reduce thrombosis of biodegradable polymer stents.

Indispensable role of β-arrestin2 in the protection of remifentanil preconditioning against hepatic ischemic reperfusion injury

Our previous study demonstrated that remifentanil, an opioid agonist, conferred profound liver protection during hepatic ischemia reperfusion injury (HIRI), in which Toll-like receptors (TLRs) played a crucial role in mediating the inflammatory responses. β-arrestin2, a well-known mu opioid receptor desensitizer, is also a negatively regulator of Toll-like receptor 4 (TLR4)-mediated inflammatory reactions in a mitogen-activated protein kinase (MAPK)-dependent manner. Using the rodent models of hepatic ischemia reperfusion injury both in wild type and TLR4 knockout (TLR4 KO) mice, we found that remifentanil preconditioning could inhibit the expression of TLR4 and reduce the inflammatory response induced by HIRI in wild type but not in TLR4 KO mice. For the in-vitro study, LPS was used to treat RAW264.7 macrophage cells to mimic the inflammatory response induced by HIRI. Remifentanil increased β-arrestin2 expression both in vivo and in vitro, while after silencing β-arrestin2 RNA, the effect of remifentanil in reducing cell death and apoptosis, as well as decreasing phosphorylation of ERK and JNK were abolished in RAW264.7 cells. These data suggested that remifentanil could ameliorate mice HIRI through upregulating β-arrestin2 expression, which may function as a key molecule in bridging opioid receptor and TLR4 pathway.

Linking nanomaterial properties to biological outcomes: analytical chemistry challenges in nanotoxicology for the next decade

This article provides our perspective on the analytical challenges in nanotoxicology as the field is entering its third decade.

Comparison between micro- and nanosized copper oxide and water soluble copper chloride: interrelationship between intracellular copper concentrations, oxidative stress and DNA damage response in human lung cells

BACKGROUND

Nano- and microscale copper oxide particles (CuO NP, CuO MP) are applied for manifold purposes, enhancing exposure and thus the potential risk of adverse health effects. Based on the pronounced in vitro cytotoxicity of CuO NP, systematic investigations on the mode of action are required. Therefore, the impact of CuO NP, CuO MP and CuCl2 on the DNA damage response on transcriptional level was investigated by quantitative gene expression profiling via high-throughput RT-qPCR. Cytotoxicity, copper uptake and the impact on the oxidative stress response, cell cycle regulation and apoptosis were further analysed on the functional level.

RESULTS

Cytotoxicity of CuO NP was more pronounced when compared to CuO MP and CuCl2 in human bronchial epithelial BEAS-2B cells. Uptake studies revealed an intracellular copper overload in the soluble fractions of both cytoplasm and nucleus, reaching up to millimolar concentrations in case of CuO NP and considerably lower levels in case of CuO MP and CuCl2. Moreover, CuCl2 caused copper accumulation in the nucleus only at cytotoxic concentrations. Gene expression analysis in BEAS-2B and A549 cells revealed a strong induction of uptake-related metallothionein genes, oxidative stress-sensitive and pro-inflammatory genes, anti-oxidative defense-associated genes as well as those coding for the cell cycle inhibitor p21 and the pro-apoptotic Noxa and DR5. While DNA damage inducible genes were activated, genes coding for distinct DNA repair factors were down-regulated. Modulation of gene expression was most pronounced in case of CuO NP as compared to CuO MP and CuCl2 and more distinct in BEAS-2B cells. GSH depletion and activation of Nrf2 in HeLa S3 cells confirmed oxidative stress induction, mainly restricted to CuO NP. Also, cell cycle arrest and apoptosis induction were most distinct for CuO NP.

CONCLUSIONS

The high cytotoxicity and marked impact on gene expression by CuO NP can be ascribed to the strong intracellular copper ion release, with subsequent copper accumulation in the cytoplasm and the nucleus. Modulation of gene expression by CuO NP appeared to be primarily oxidative stress-related and was more pronounced in redox-sensitive BEAS-2B cells. Regarding CuCl2, relevant modulations of gene expression were restricted to cytotoxic concentrations provoking impaired copper homoeostasis.

Multifunctional, Tunable Metal-Organic Framework Materials Platform for Bioimaging Applications

Herein, we describe a novel multifunctional metal-organic framework (MOF) materials platform that displays both porosity and tunable emission properties as a function of the metal identity (Eu, Nd, and tuned compositions of Nd/Yb). Their emission collectively spans the deep red to near-infrared (NIR) spectral region (∼614-1350 nm), which is highly relevant for in vivo bioimaging. These new materials meet important prerequisites as relevant to biological processes: they are minimally toxic to living cells and retain structural integrity in water and phosphate-buffered saline. To assess their viability as optical bioimaging agents, we successfully synthesized the nanoscale Eu analog as a proof-of-concept system in this series. In vitro studies show that it is cell-permeable in individual RAW 264.7 mouse macrophage and HeLa human cervical cancer tissue culture cells. The efficient discrimination between the Eu emission and cell autofluorescence was achieved with hyperspectral confocal fluorescence microscopy, used here for the first time to characterize MOF materials. Importantly, this is the first report that documents the long-term conservation of the intrinsic emission in live cells of a fluorophore-based MOF to date (up to 48 h). This finding, in conjunction with the materials' very low toxicity, validates the biocompatibility in these systems and qualifies them as promising for use in long-term tracking and biodistribution studies.

Cytotoxicity and genotoxicity of nano - and microparticulate copper oxide: role of solubility and intracellular bioavailability

Background

Nano- or microscale copper oxide particles (CuO NP, CuO MP) are increasingly applied as catalysts or antimicrobial additives. This increases the risk of adverse health effects, since copper ions are cytotoxic under overload conditions.

Methods

The extra- and intracellular bioavailability of CuO NP and CuO MP were explored. In addition, different endpoints related to cytotoxicity as well as direct and indirect genotoxicity of the copper oxides and copper chloride (CuCl₂) were compared.

Results

Comprehensively characterized CuO NP and CuO MP were analysed regarding their copper ion release in model fluids. In all media investigated, CuO NP released far more copper ions than CuO MP, with most pronounced dissolution in artificial lysosomal fluid. CuO NP and CuCl₂ caused a pronounced and dose dependent decrease of colony forming ability (CFA) in A549 and HeLa S3 cells, whereas CuO MP exerted no cytotoxicity at concentrations up to 50 μg/mL. Cell death induced by CuO NP was at least in part due to apoptosis, as determined by subdiploid DNA as well as via translocation of the apoptosis inducing factor (AIF) into the cell nucleus. Similarly, only CuO NP induced significant amounts of DNA strand breaks in HeLa S3 cells, whereas all three compounds elevated the level of H₂O₂-induced DNA strand breaks. Finally, all copper compounds diminished the H₂O₂-induced poly(ADP-ribosyl)ation, catalysed predominantly by poly(ADP-ribose)polymerase-1 (PARP-1); here, again, CuO NP exerted the strongest effect. Copper derived from CuO NP, CuO MP and CuCl₂ accumulated in the soluble cytoplasmic and nuclear fractions of A549 cells, yielding similar concentrations in the cytoplasm but highest concentrations in the nucleus in case of CuO NP.

Conclusions

The results support the high cytotoxicity of CuO NP and CuCl₂ and the missing cytotoxicity of CuO MP under the conditions applied. For these differences in cytotoxicity, extracellular copper ion levels due to dissolution of particles as well as differences in physicochemical properties of the particles like surface area may be of major relevance. Regarding direct and indirect genotoxicity, especially the high copper content in the cell nucleus derived after cell treatment with CuO NP appears to be decisive.