On technological and immunological benefits of multivalent single-injection microsphere vaccines

Enhancing influenza vaccine immunogenicity and efficacy through infection mimicry using silk microneedles

Traditional bolus vaccine administration leads to rapid clearance of vaccine from lymphoid tissue. However, there is increasing evidence suggesting that the kinetics of antigen delivery can impact immune responses to vaccines, particularly when tailored to mimic natural infections. Here, we present the specific enhancements sustained release immunization confers to seasonal influenza vaccine, including the magnitude, durability, and breadth of humoral responses. To achieve sustained vaccine delivery kinetics, we have developed a microneedle array patch (MIMIX), with silk fibroin-formulated vaccine tips designed to embed in the dermis after a short application to the skin and release antigen over 1-2 weeks, mimicking the time course of a natural influenza infection. In a preclinical murine model, a single influenza vaccine administration via MIMIX led to faster seroconversion, response-equivalence to prime-boost bolus immunization, higher HAI titers against drifted influenza strains, and improved protective efficacy upon lethal influenza challenge when compared with intramuscular injection. These results highlight infection mimicry, achieved through sustained release silk microneedles, as a powerful approach to improve existing seasonal influenza vaccines, while also suggesting the broader potential of this platform technology to enable more efficacious next-generation vaccines and vaccine combinations.

Engineered drug delivery devices to address Global Health challenges

There is a dire need for innovative solutions to address global health needs. Polymeric systems have been shown to provide substantial benefit to all sectors of healthcare, especially for their ability to extend and control drug delivery. Herein, we review polymeric drug delivery devices for vaccines, tuberculosis, and contraception.

An ultraviolet-curable, core-shell vaccine formed via phase separation

One of the central challenges in the field of vaccine delivery is to develop a delivery method that maintains antigen stability while also enabling control over the system's release kinetics. Addressing these challenges would not only allow for expanded access to vaccines worldwide but would also help significantly reduce mortality rates in developing countries. In this article, we report the development of single-injection vaccine depots for achieving novel delayed burst release. Synthesized poly(ε-caprolactone) and poly(ε-caprolactone) triacrylate were used to form stationary bubbles within an aqueous solution of 10% carboxymethylcellulose. These polymeric bubbles (referred to as "polybubbles") can then be injected with an aqueous solution of cargo, resulting in the formation of a polymeric shell. The puncture resulting from cargo injection self-heals prior to ultraviolet (UV) curing. UV curing and lyophilization were shown to enhance the stability of the polybubbles. BSA- CF 488 and HIV1 gp120/41 were used as the antigen in the study as a proof-of-concept. Further endeavors to automate the production of polybubbles are underway.

Single-injection vaccines: Progress, challenges, and opportunities

Currently, vaccination is the most efficient and cost-effective medical treatment for infectious diseases; however, each year 10 million infants remain underimmunized due to current vaccination schedules that require multiple doses to be administered across months or years. These dosing regimens are especially challenging in the developing world where limited healthcare access poses a major logistical barrier to immunization. Over the past four decades, researchers have attempted to overcome this issue by developing single-administration vaccines based on controlled-release antigen delivery systems. These systems can be administered once, but release antigen over an extended period of time to elicit both primary and secondary immune responses resulting in antigen-specific immunological memory. Unfortunately, unlike controlled release systems for drugs, single-administration vaccines have yet to be commercialized due to poor antigen stability and difficulty in obtaining unconventional release kinetics. This review discusses the current state of single-administration vaccination, challenges delaying the development of these vaccines, and potential strategies for overcoming these challenges.

Next generation vaccines: single-dose encapsulated vaccines for improved global immunisation coverage and efficacy

OBJECTIVES

Vaccination is considered the most successful health intervention; yet incomplete immunisation coverage continues to risk outbreaks of vaccine preventable diseases worldwide. Vaccination coverage improvement through a single-dose prime-boost technology would revolutionise modern vaccinology, impacting on disease prevalence, significantly benefiting health care and lowering economic burden of disease.

KEY FINDINGS

Over the past 30 years, there have been efforts to develop a single-dose delayed release vaccine technology that could replace the repeated prime-boost immunisations required for many current vaccines. Biocompatible polymers have been employed to encapsulate model vaccines for delayed delivery in vivo, using either continuous or pulsed release. Biomaterial considerations, safety aspects, particle characteristics and immunological aspects of this approach are discussed in detail.

SUMMARY

Despite many studies showing the feasibility of vaccine encapsulation for single-dose prime-boost administration, none have been translated into convincing utility in animal models or human trials. Further development of the encapsulation technology, through optimising the particle composition, formulation, antigen loading efficacy and stability, could lead to the application of this important approach in vaccine deployment. If successful, this would provide a solution to better global vaccination coverage through a reduction in the number of immunisations needed to achieve protection against infectious diseases. This review provides an overview of single-dose vaccination in the context of today's vaccine needs and is derived from a body of literature that has not been reviewed for over a decade.

Combatting infectious diseases; nanotechnology as a platform for rational vaccine design

Currently, several successful vaccines are available. However, for pathogens with a highly variable genetic composition, and for which serum IgG antibodies are not a useful correlate of protection, effective vaccines are yet to be developed. This is due to a lack of both the understanding of the immunological pathways leading to long-term protection and the ability to translate the available knowledge into a suitable vaccine formulation. Regarding the latter, nanoparticles can be an attractive platform for vaccine development, as they offer multiple options for improving safety and efficacy. For example, side effects might be decreased upon encapsulation of the adjuvant and the concomitant delivery of antigen and adjuvant is a very promising tool for increasing efficacy. In addition to the many promises, the use of nanoparticles as vaccine carriers should be implemented with caution: the more sophisticated a particle, the more parameters need to be controlled during production and storage.

Gamma irradiation of active self-healing PLGA microspheres for efficient aqueous encapsulation of vaccine antigens

PURPOSE

To investigate the effect of γ-irradiation of poly(lactic-co-glycolic acid) (PLGA)/Al(OH)₃/0 or 5 wt% diethyl phthalate (DEP) microspheres for active self-healing encapsulation of vaccine antigens.

METHODS

Microspheres were irradiated with ⁶⁰Co at 2.5 and 1.8 MRad and 0.37 and 0.20 MRad/h. Encapsulation of tetanus toxoid (TT) was achieved by mixing Al(OH)₃-PLGA microspheres with TT solution at 10-38°C. Electron paramagnetic resonance (EPR) spectroscopy was used to examine free radical formation. Glass transition temperature (T(g)) and molecular weight of PLGA was measured by differential scanning calorimetry and gel permeation chromatography, respectively. Loading and release of TT were examined by modified Bradford, amino acid analysis, and ELISA assays.

RESULTS

EPR spectroscopy results indicated absence of free radicals in PLGA microspheres after γ-irradiation. Antigen-sorbing capacity, encapsulation efficiency, and T(g) of the polymer were also not adversely affected. When DEP-loaded microspheres were irradiated at 0.2 MRad/h, some PLGA pores healed during irradiation and PLGA healing during encapsulation was suppressed. The molecular weight of PLGA was slightly reduced when DEP-loaded microspheres were irradiated at the same dose rate. At the 0.37 MRad/h dose rate, these trends were not observed and the full immunoreactivity of TT was preserved during encapsulation and 1-month release. Gamma irradiation slightly increased TT initial burst release. The small increase in total irradiation dose from 1.8 to 2.5 MRad had insignificant effect on the polymer and microspheres properties analyzed.

CONCLUSIONS

Gamma irradiation is a plausible approach to provide a terminally sterilized, self-healing encapsulation PLGA excipient for vaccine delivery.

Nanoscaled buffering zone of charged (PLGA)n-b-bPEI micelles in acidic microclimate for potential protein delivery application

Poly(lactide-co-glycolide) (PLGA) has most often been employed for the controlled release of protein formulations because of its safety profile with non-toxic degradation products. Nevertheless, such formulations have been plagued by a local acidic microenvironment and protein-polymer interactions, which result in chemical and physical denaturation of loaded proteins and often unfavorable release profiles. This study investigated the pH change of inner PLGA microsphere (MS) using charged (PLGA)(n)-b-branched polyethyleneimine (bPEI) micelles. The designed micelles can be transformed into either micelle or reverse micelle (RM) depending on the solvent and RM can form microspheres. In addition, (PLGA)(n)-b-bPEI can be modified into (PLGA)(n)-b-(carboxylated bPEI) via carboxylation of the primary amines. Cationic micelle (CM) or anionic micelle (AM) was complexed with counter-charged proteins leading to nanosized particles (approximately 100nm). In the micelle/protein complexes, the micelles mostly maintained their proton buffering capacity, and consequently, prevented or delayed the typical decrease in pH caused by degradation of PLGA in aqueous solution. Reconstitutable micelle/protein complexes allowed for increased and fine-tuned protein loading (~20wt.% when using CM1 (CM prepared from PLGA(36kDa)-b-bPEI(25kDa))/insulin complexes) in PLGA MS. In CM2 (CM prepared from (PLGA(36kDa))(2)-b-bPEI(25kDa))/insulin (4 of weight ratio (WR) of micelle to protein; WR4)-loaded PLGA MS, CM2 strongly prevented the micellar nanoenvironmental pH (pH 6.6 within 5days and then approximately pH 8.5) to be acidified in PLGA MS for 9weeks, unlike CM2-free PLGA MS. In conclusion, our findings propose that the proton buffering capacity and protein loading in PLGA MS can be tuned by controlling the complexation ratios of micelles and proteins, polymeric architectures of (PLGA)(n)-b-bPEI copolymers and WR of micelle/protein complexes and PLGA (or RM).

Current advances in research and clinical applications of PLGA-based nanotechnology

Co-polymer poly(lactic-co-glycolic acid) (PLGA) nanotechnology has been developed for many years and has been approved by the US FDA for the use of drug delivery, diagnostics and other applications of clinical and basic science research, including cardiovascular disease, cancer, vaccine and tissue engineering. This article presents the more recent successes of applying PLGA-based nanotechnologies and tools in these medicine-related applications. It focuses on the possible mechanisms, diagnosis and treatment effects of PLGA preparations and devices. This updated information will benefit to both new and established research scientists and clinical physicians who are interested in the development and application of PLGA nanotechnology as new therapeutic and diagnostic strategies for many diseases.

Novel electrohydrodynamic preparation of porous chitosan particles for drug delivery

Uniform spherical chitosan particles of size <10 microm in diameter are important in drug delivery applications due to their excellent biocompability and biodegradability. A high concentration of chitosan in the particles can help to control the release of drugs and methods for processing high viscosity chitosan solutions are therefore required. In principle, any type of polymer, whether hydrophobic or hydrophilic, can be electrosprayed to obtain monodisperse particles of diameter <10 microm. In practice, however, electrospraying of biopolymers having viscosities of >100 mPa s results in particles >10 microm diameter. In this study, by reducing surface tension of a high viscosity chitosan suspension, it was found that smaller diameter particles could be prepared. Chitosan solutions were electrosprayed in the stable cone-jet mode to systematically study the relationship between particle diameter, viscosity and surface tension. Increasing viscosity resulted in larger diameter particles with a broad size distribution, but decreasing surface tension had the opposite effect. Results show that a chitosan solution having a viscosity of approximately 80 mPa s can be used to prepare chitosan particles of diameter approximately 2.5 microm which on drying reduced to particles of 500 nm.

Engineering biodegradable polyester particles with specific drug targeting and drug release properties

Poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA) microspheres and nanoparticles remain the focus of intensive research effort directed to the controlled release and in vivo localization of drugs. In recent years engineering approaches have been devised to create novel micro- and nano-particles which provide greater control over the drug release profile and present opportunities for drug targeting at the tissue and cellular levels. This has been possible with better understanding and manipulation of the fabrication and degradation processes, particularly emulsion-solvent extraction, and conjugation of polyesters with ligands or other polymers before or after particle formation. As a result, particle surface and internal porosity have been designed to meet criteria-facilitating passive targeting (e.g., for pulmonary delivery), modification of the drug release profile (e.g., attenuation of the burst release) and active targeting via ligand binding to specific cell receptors. It is now possible to envisage adventurous applications for polyester microparticles beyond their inherent role as biodegradable, controlled drug delivery vehicles. These may include drug delivery vehicles for the treatment of cerebral disease and tumor targeting, and co-delivery of drugs in a pulsatile and/or time-delayed fashion.

Pharmaceutical particle engineering via spray drying

This review covers recent developments in the area of particle engineering via spray drying. The last decade has seen a shift from empirical formulation efforts to an engineering approach based on a better understanding of particle formation in the spray drying process. Microparticles with nanoscale substructures can now be designed and their functionality has contributed significantly to stability and efficacy of the particulate dosage form. The review provides concepts and a theoretical framework for particle design calculations. It reviews experimental research into parameters that influence particle formation. A classification based on dimensionless numbers is presented that can be used to estimate how excipient properties in combination with process parameters influence the morphology of the engineered particles. A wide range of pharmaceutical application examples—low density particles, composite particles, microencapsulation, and glass stabilization—is discussed, with specific emphasis on the underlying particle formation mechanisms and design concepts.

Stabilization of recombinant human growth hormone against emulsification-induced aggregation by Pluronic surfactants during microencapsulation

Protein aggregation upon exposing to the water/organic solvent interface is one of the most significant obstacles in developing poly(lactic-co-glycolic acid) (PLGA) microspheres with double emulsion process. The aim of present study is to devise a formulation strategy to prevent recombinant human growth hormone (rhGH) from aggregation during microencapsulation. The excipients used for stabilizing rhGH were selected from sugars, nonionic surfactants, polyol, and protein. Among the candidates, surfactants exhibited potentialities in protecting rhGH against emulsification-induced aggregation. It was also found that Pluronic F127 showed an outstanding as well as concentration-dependent stabilizing effect on rhGH, which was different to Pluronic F68 and Tween 20. After the rhGH solution comprising F127 and sucrose was emulsified with methylene chloride, the recovery of monomeric protein achieved 99.0%, principally attributed to the presence of F127. This solution was subsequently encapsulated as inner aqueous phase in the PLGA microspheres by a conventional double emulsion process, with the encapsulation efficiency higher than 98%. Improvement in the release of rhGH was observed for the microspheres co-encapsulating Pluronic F127 regardless in the presence or absence of sucrose, compared to the microspheres containing rhGH alone. The result further implied that co-encapsulation of Pluronic F127 in the microspheres played an important role in the stabilization of rhGH.

Coadsorption of HIV-1 p24 and gp120 proteins to surfactant-free anionic PLA nanoparticles preserves antigenicity and immunogenicity

Biodegradable micro- or nanoparticles with surface adsorbed antigens represent a promising method for in vivo delivery of vaccines. Most vaccines, licensed or under development, are based on combined delivery of multiple antigens. Thus, we investigated the feasibility of combining two vaccine antigens, HIV-1 p24 and gp120 proteins, on the surface of surfactant-free anionic PLA nanoparticles obtained by an improved solvent diffusion method. The analysis of adsorption isotherms has shown that both proteins had similar and high affinities for the nanoparticles. Coadsorption of p24 and gp120 onto the same PLA particle was evidenced by sandwich ELISA, using antibodies directed against one protein for particle capture and the other one for detection. To assess structural integrity, the antigenicity of free and PLA-adsorbed antigens was compared by competition ELISA, using a set of 6 anti-p24 and 7 anti-gp120 antibodies, as well as soluble CD4. The antigenicity of proteins on the nanoparticle surface was well preserved, adsorbed either individually or in combination. Furthermore, both antigens maintained their immunogenicity, since high antibody titres (10(6) for p24 and 10(5) for gp120) were elicited in mice with monovalent and divalent PLA formulations. Taken together our results show that development of multivalent vaccines based on anionic PLA nanoparticles is possible. Moreover, coadsorption of a ligand for cell-specific targeting or of an immunostimulatory molecule will further extend the field of application of delivery systems based on charged micro- and nanoparticles.

Influences of excipients on in vitro release and in vivo performance of tetanus toxoid loaded polymer particles

Protein instability during microencapsulation has been one of the major hurdles of biodegradable polymer particles-based vaccine delivery systems. In the present work, effect of serum albumin, sucrose and sodium bicarbonate on surface morphology, entrapment efficiency, in vitro release and in vivo performance tetanus toxoid (TT) loaded PLA particles were investigated. Use of serum albumin as well as high concentration of protein antigen ( approximately 60mg/ml) helped in protecting the immunoreactivity of the antigen during primary emulsification step of particle formulation. Incorporation of sucrose in the internal aqueous phase led to the reduction in encapsulation efficiency of TT from 43.8+/-4.3% to 27.3+/-3.6% in PLA particles and resulted with formation of particles having irregular surface characteristics. Addition of sodium bicarbonate along with sucrose during primary emulsion led to slight improvement in encapsulation efficiency of TT (34.3+/-3.2%) but affected the in vivo performance in terms of serum anti-TT antibody titers from single point immunization. Restoration of osmotic balance by adding equivalent amount of sucrose in external aqueous phase helped in preventing multiple emulsion instability and subsequently improved the encapsulation efficiency of TT to 63.1+/-4.2%. Maximum entrapment efficiency of TT up to 69.2+/-5.1% was achieved when serum albumin, sucrose and sodium bicarbonate were used in internal aqueous phase and sucrose was used in the external aqueous phase. Polymer particles entrapping tetanus toxoid along with optimal stabilizers showed burst release of immunoreactive antigen (>40% in early period) and elicited high and sustained anti-TT antibody titers from single point intramuscular immunization. Anti-TT antibody titers were further enhanced upon immunization of admixture of PLA particles and alum. Choice and use of stabilizers during particle formulation thus need careful considerations not only to protect the immunoreactivity of the antigen, but also to produce stable, uniform particles for optimal in vivo performances.

Influence of particle size, antigen load, dose and additional adjuvant on the immune response from antigen loaded PLA microparticles

Polylactide (PLA) polymer particles entrapping tetanus toxoid (TT) were evaluated in terms of particle size, antigen load, dose and additional adjuvant for achieving high and sustained anti-TT antibody titer from single point intramuscular immunization. Admixture of polymer entrapped TT and alum improved the immune response in comparison to particle-based immunization. High and long lasting antibody titer was achieved upon immunization with 2-8 microm size particles. Microparticles within the size range 50-150 microm elicited very low serum antibody response. Immunization with very small particles (<2 microm) and with intermediate size range particles (10-70 microm) elicited comparable antibody response from single point immunization but lower in comparison to that achieved while immunizing with 2-8 microm size particles. Potentiation of antibody response on immunization of admixture of microparticles and alum was also dependent on particle size. These results indicate the need of optimal particle sizes in micron ranges for improved humoral response from single point immunization. Increasing antigen load on polymer particles was found to have positive influence on generation of antibody titers from particle based immunization. Maximum peak antibody titer of approximately 300 microg/mL was achieved on day 50 upon immunization with particles having highest load of antigen (94 microg/mg of polymer). Increase in dose of polymer entrapped antigen resulted in concomitant increase in peak antibody titers indicating the importance of antigen stability, particle size and load on generating reproducible immune response. Optimization of particle size, antigen load, dose and use of additional adjuvant resulted in high and sustained anti-TT antibody titers over a period of more than 250 days from single point immunization. Serum anti-TT antibody titers from single point immunization of admixrure of PLA particles and alum was comparable with immunization from two divided doses of alum adsorbed TT.

Childhood and malaria vaccines combined in biodegradable microspheres produce immunity with synergistic interactions

Biodegradable microspheres may represent a potential tool for the delivery of combination vaccines. We demonstrate strong immunogenicity of five co-encapsulated antigens after a single subcutaneous inoculation in guinea pigs. Tetanus- and diphtheria-specific antibodies were not significantly affected by the presence of either antigen or by the presence of pertussis or Haemophilus influenzae type b (Hib) antigens. Microsphere formulations gave better protection against diphtheria toxin than did two injections of a licensed tetravalent vaccine. Finally, a synthetic malaria peptide antigen (PfCS) also encapsulated in PLGA microspheres increased diphtheria and tetanus-specific immunity and improved protection against diphtheria. These findings demonstrate the potential of microspheres as an alternative and promising strategy for combination vaccines with a further aptitude in reducing the number of inoculations required to gain functional immunity.

In vivo uptake of an experimental microencapsulated diphtheria vaccine following sub-cutaneous immunisation

Previous studies demonstrated in vitro phagocytosis of poly(lactide-co-glycolide) (PLGA) microspheres (MS) by macrophages and dendritic cells and the biodistribution of fluorescent PLGA particles following oral or intranasal administration. In this study, we report the uptake and biodistribution of sub-cutaneously administered fluorescent labelled PLGA MS loaded with diphtheria toxoid (DT). The cell type and percentage of fluorescent positive cells were determined by flow cytometry and confirmed by fluorescent microscopy. Fluorescent particles were detected inside cells of the peritoneal flush as early as 10 min post-inoculation, predominantly in cells of macrophage morphology. In vivo trafficking of PLGA particles following a sub-cutaneous immunisation of mice appeared to be governed by macrophages. However, in the first week after inoculation, dendritic cells played a significant role in the uptake and digestion of the microspheres, thereby triggering the immune response against the antigen. Fluorescent PLGA MS were also observed in cells of lymphoid tissues such as mesenteric lymph nodes (MLN) and spleen (S). However, microsphere fluorescence in lymphoid tissues decreased rapidly, as they were degraded inside the cells, thereby enabling the presentation of the antigen to specific cells of the immune system. To our knowledge, this is the first time the fate of immunogenic PLGA microspheres was studied in vivo following a sub-cutaneous injection route.

Biodegradable microspheres for protein delivery

In a very short time, since their emergence, the field of controlled delivery of proteins has grown immensely. Because of their relatively large size, they have low transdermal bioavailabilities. Oral bioavailability is generally poor since they are poorly absorbed and easily degraded by proteolytic enzymes in the gastrointestinal tract. Ocular and nasal delivery is also unfavorable due to degradation by enzymes present in eye tissues and nasal mucosa. Thus parenteral delivery is currently most demanding and suitable for delivery of such molecules. In systemic delivery of proteins, biodegradable microspheres as parenteral depot formulation occupy an important place because of several aspects like protection of sensitive proteins from degradation, prolonged or modified release, pulsatile release patterns. The main objective in developing controlled release protein injectables is avoidance of regular invasive doses which in turn provide patient compliance, comfort as well as control over blood levels. This review presents the outstanding contributions in field of biodegradable microspheres as protein delivery systems, their methods of preparation, drug release, stability, interaction with immune system and regulatory considerations.

An experimental divalent vaccine based on biodegradable microspheres induces protective immunity against tetanus and diphtheria

In an endeavor towards development of multivalent vaccines based on biodegradable microspheres, we tested the immunologic performance of several divalent microsphere formulations against tetanus and diphtheria. Microspheres were made by separate microencapsulation of tetanus and diphtheria toxoid in poly(lactide-co-glycolide) by either spray-drying or coacervation. Guinea pigs were subcutaneously immunized by a single injection of the divalent vaccines or, for control, an equivalent dose of a licensed vaccine containing both antigens adsorbed on aluminium hydroxide. All microsphere formulations were strongly immunogenic, irrespective of particle size and hydrophobicity. End point titers of ELISA antibodies, mainly of the IgG1 subtype, were comparable to those obtained after immunization with the licensed vaccine. The microspheres provided increasing levels of antibodies, during the 16 weeks of testing, and the antibodies were weakly polarized towards tetanus. The induced antibodies were also toxin neutralizing, as determined for both diphtheria (1-4 IU/mL) and tetanus (5-9 IU/mL) 8 weeks after immunization. These neutralization levels were several orders of magnitude above the level considered minimum for protection (0.01 IU/mL). When the animals were challenged with tetanus or diphtheria toxins 6 weeks after immunization, microsphere vaccines produced protective immunity that was comparable to or better than that induced by the licensed divalent vaccine. In conclusion, this study showed that a single administration of biodegradable microsphere vaccines provided protective immunity against diphtheria and tetanus, and that this immunization approach might be feasible for multivalent vaccines.

Microparticles as vaccine adjuvants and delivery systems

Adjuvants can be broadly divided into two groups, based on their principal mechanisms of action: vaccine delivery systems and immunostimulatory adjuvants. Vaccine delivery systems are generally particulate (e.g., emulsions, microparticles, immunostimulatory complexes and liposomes) and function mainly to target associated antigens into antigen-presenting cells. However, increasingly, more complex formulations are being developed in which delivery systems are exploited both for the delivery of antigens and also for the delivery of coadministered immunostimulatory adjuvants. The rationale for this approach is to ensure that both antigen and adjuvant are delivered into the same population of antigen-presenting cells. In addition, delivery systems can focus the effect of the adjuvants onto the key cells of the immune system and limit the systemic distribution of the adjuvant, to minimize its potential to induce adverse effects. The formulation and delivery of potent adjuvants in microparticles may allow the development of prophylactic and therapeutic vaccines against cancers and chronic infectious diseases, which are currently poorly controlled. In addition, microparticle formulations may also allow vaccines to be delivered mucosally.