Biological and biochemical properties of the carbon composite and polyethylene implant materials

Synthesis, structure, and properties of carbon/carbon composites artificial rib for chest wall reconstruction

In this work, braided carbon fiber reinforced carbon matrix composites (3D-C/C composites) are prepared by chemical vapor infiltration process. Their composite structure, mechanical properties, biocompatibility, and in vivo experiments are investigated and compared with those of traditional 2.5D-C/C composites and titanium alloys TC4. The results show that 3D-C/C composites are composed of reinforced braided carbon fiber bundles and pyrolytic carbon matrix and provide 51% open pores with a size larger than 100 μm for tissue adhesion and growth. The Young's modulus of 3D-C/C composites is about 5 GPa, much smaller than those of 2.5D-C/C composites and TC4, while close to the autogenous bone. 3D-C/C composites have a higher tensile strength (167 MPa) and larger elongation (5.0%) than 2.5D-C/C composites (81 MPa and 0.7%), and do not show obvious degradation after 1 × 106 cyclic tensile loading. The 3D-C/C composites display good biocompatibility and have almost no artifacts on CT imaging. The in vivo experiment reveals that 3D-C/C composites artificial ribs implanted in dogs do not show displacement or fracture in 1 year, and there are no obvious proliferation and inflammation in the soft tissues around 3D-C/C composites implant. Our findings demonstrate that 3D-C/C composites are suitable for chest wall reconstruction and present great potentials in artificial bones.

The influence of implant surface properties on cell adhesion and proliferation

Interactions of the foreign material of implant and the living tissue on the cell level can cause prolonged healing or, worse, loss of the implant. The cell response to the presence of some implant materials was studied under in vitro conditions. The influence of physicochemical surface parameters on the response of the cells in the immediate vicinity of implants, namely on adhesion, proliferation and synthetic activity of fibroblasts, and on the blood coagulation were compared. The direct contact of tested materials (titanium and Ti6Al4V alloy with various surface treatments, Cr Co Mo alloy, hydroxyapatite-coated titanium, zirconium oxide ceramics, polyethylene and carbon composite) on cell spreading was monitored and the presence of TNF-alpha and IL-8 was evaluated in the cultivation medium. The formation of blood clots was investigated on samples immersed in a well with freshly drawn whole rabbit blood using a scanning electron microscope. The surface free energy was estimated using the measurement of static contact angle. Both the advancing and receding contact angles were measured by the dynamic Wilhemy plate method. Two main groups with extremes in cell viability were established. In the first group the increased polar component of surface free energy, the highest cell density, the lowest inflammatory cytokine production, but no fibres in the clotting blood were found. On the contrary, the second group of materials with a very low polar component of the surface free energy showed distinctly higher expression of inflammatory mediators, low cell proliferation, but faster formation of fibres in the blood coagulum.

Influence of gold nanoparticles on collagen fibril morphology quantified using transmission electron microscopy and image analysis

BACKGROUND

Development of implantable biosensors for disease detection is challenging because of poor biocompatibility of synthetic materials. A possible solution involves engineering interface materials that promote selfassembly and adhesion of autologous cells on sensor surfaces. Crosslinked type-I collagen is an acceptable material for developing engineered basement membranes. In this study, we used functionalized gold nanoparticles as the crosslinking agent. Functionalized nanoparticles provide sites for crosslinking collagen as well as sites to deliver signaling compounds that direct selfassembly and reduce inflammation. The goal of this study was to obtain a quantitative parameter to objectively determine the presence of crosslinks.

METHODS

We analyzed TEM images of collagen fibrils by two methods: Run length analysis and topology analysis after medial axis transform.

RESULTS

Run length analysis showed a significant reduction of the interfibril spaces in the presence of nanoparticles (change of 40%, P < 0.05), whereas the fibril thickness remained unchanged. In the topological network, the number of elements, number of branches and number of sides increased significantly in the presence of nanoparticles (P < 0.05). Other parameters, especially the number of loops showed only a minimal and nonsignificant change. We chose a ratiometric parameter of the number of branches normalized by the number of loops to achieve independence from gross fibril density. This parameter is lower by a factor of 2.8 in the presence of nanoparticles (P < 0.05).

CONCLUSION

The numerical parameters presented herein allow not only to quantify fibril mesh complexity and crosslinking, but also to help quantitatively compare cell growth and adhesion on collagen matrices of different degree of crosslinking in further studies.