An ultra-sensitive detection system for sulfur dioxide and nitric oxide based on improved differential optical absorption spectroscopy method

A highly sensitive detection system for sulfur dioxide (SO₂) and nitric oxide (NO) was developed via deep ultraviolet differential optical absorption spectroscopy (DUV-DOAS). The wavelength range of 200-230 nm was used which was rarely used before as result of severe cross sensitivity to SO₂ and NO, in this work, this problem was overcame. A system detection limit (DL) of 60 ppb for SO₂ has been reached which was among the best ones. Meanwhile, a novel method based on spectrum superposition theory was proposed to decompose the differential optical density (DOD) of NO from that of gas mixture in cross sensitive band. The advantage of this method is that the most sensitive absorption peak of NO was used, which cannot be used by conventional methods due to the cross sensitive to SO₂. A system DL of 7 ppb for NO has been achieved which is among the best ones reported before. Furthermore, the effect of gas temperature and humidity on concentration retrieval has also been studied, gas temperature and humidity compensation models have also been proposed. The experimental results show that the compensation models succeed in compensating the deviation caused by gas temperature and humidity. The environmental adaptability of the system has been enhanced. This work achieves the aim of monitoring ultra-low concentration of SO₂ and NO in a complex environment simultaneously.

System for simultaneous sensing of sulfur dioxide and carbon disulfide based on deep ultraviolet absorption spectroscopy

In this study, a sensitive system for simultaneous sensing of sulfur dioxide and carbon disulfide was developed based on absorption spectroscopy in the deep ultraviolet. An effective spectrum-unfolding approach is proposed to examine the overlapping spectral characteristics. Direct proportional relations with determination coefficients of 0.999 were obtained. The detection limit of sulfur dioxide was determined to be 42 ppb, and a detection limit of 5 ppb for carbon disulfide was achieved with an optical length of 20 cm. The interplay between the measurement results of the two components was investigated. Interference close to the detection limits was confirmed for both sulfur dioxide and carbon disulfide measurements. An automatic and reliable simultaneous sensing system for sulfur dioxide and carbon disulfide was constructed.