Re-examining Dust Chemical Aging and Its Impacts on Earth's Climate

The impact of atmospheric particulate matter (i.e., aerosols) on Earth's radiative balance has been and continues to be the leading source of uncertainty with respect to predictions of future temperature increases due to climate change. Mineral dust particles transported from deserts and semiarid regions across the globe are a dominant contributor to the aerosol burden. Dust has many and diverse effects on Earth's climate: it directly scatters and/or absorbs incoming sunlight; it reacts with trace gases leading to impacts on the oxidizing capacity of the atmosphere that affect both the lifetime of the greenhouse gas methane in addition to concentrations of tropospheric ozone-a greenhouse gas and criteria air pollutant; it influences the production as well as the lifetime and radiative properties of clouds; and it deposits nutrients to aquatic and terrestrial ecosystems that can stimulate primary production and facilitate the sequestration of atmospheric carbon dioxide (CO₂). This Account will focus on the last three effects. The ability of dust to affect clouds and biogeochemical cycles hinges upon the chemical nature of dust particles-in particular, whether the compounds found in dust particles are water-soluble. The solubility of nutrients found in dust is particularly critical for determining the impact of atmospheric deposition on ocean productivity. The traditional viewpoint is that dust is inherently insoluble but reactive toward trace acidic gases, a process herein referred to as chemical aging. These reactions are thought to affect the oxidizing capacity of the atmosphere while effectively transforming the chemical composition of dust by increasing its solubility. Consequently, chemical aging is hypothesized to substantially increase the impact of dust on cloud droplet formation and marine biogeochemical cycles.This Account presents recent advances in our understanding of the mechanisms that determine how efficiently dust undergoes chemical aging and what the consequences of these processes are for the different effects of dust on Earth's climate. This Account will re-examine the traditional viewpoint that dust chemical aging strongly impacts marine biogeochemical cycles as well as the ability of dust to nucleate cloud droplets. Laboratory studies on environmental samples are combined with chemical analysis of field samples collected at dust transport receptor sites to better understand chemical aging mechanisms and determine the impact of dust on tropospheric oxidants, clouds, and biogeochemical cycles. Our results highlight the important role that dust mineralogy plays in both the nucleation of clouds as well as the kinetics responsible for the chemical aging of dust. This Account will present cases where dust contains inherently soluble minerals and does not require chemical aging in order to efficiently nucleate clouds in the atmosphere. Lastly, this Account illustrates the critical role that nondust aerosols, namely, wildfire and combustion emissions, play as a supplier of soluble nutrients important for biogeochemical cycles, particularly in marine environments. This Account will discuss these findings and highlight future research directions and recommendations to better understand dust-climate interactions and the emerging role of biomass burning aerosol in marine biogeochemical cycles.

Analyses of Namibian Seasonal Salt Pan Crust Dynamics and Climatic Drivers Using Landsat 8 Time-Series and Ground Data

Salt pans are highly dynamic environments that are difficult to study by in situ methods because of their harsh climatic conditions and large spatial areas. Remote sensing can help to elucidate their environmental dynamics and provide important constraints regarding their sedimentological, mineralogical, and hydrological evolution. This study utilizes spaceborne multitemporal multispectral optical data combined with spectral endmembers to document spatial distribution of surface crust types over time on the Omongwa pan located in the Namibian Kalahari. For this purpose, 49 surface samples were collected for spectral and mineralogical characterization during three field campaigns (2014–2016) reflecting different seasons and surface conditions of the salt pan. An approach was developed to allow the spatiotemporal analysis of the salt pan crust dynamics in a dense time-series consisting of 77 Landsat 8 cloud-free scenes between 2014 and 2017, covering at least three major wet–dry cycles. The established spectral analysis technique Sequential Maximum Angle Convex Cone (SMACC) extraction method was used to derive image endmembers from the Landsat time-series stack. Evaluation of the extracted endmember set revealed that the multispectral data allowed the differentiation of four endmembers associated with mineralogical mixtures of the crust’s composition in dry conditions and three endmembers associated with flooded or muddy pan conditions. The dry crust endmember spectra have been identified in relation to visible, near infrared, and short-wave infrared (VNIR–SWIR) spectroscopy and X-ray diffraction (XRD) analyses of the collected surface samples. According these results, the spectral endmembers are interpreted as efflorescent halite crust, mixed halite–gypsum crust, mixed calcite quartz sepiolite crust, and gypsum crust. For each Landsat scene the spatial distribution of these crust types was mapped with the Spectral Angle Mapper (SAM) method and significant spatiotemporal dynamics of the major surface crust types were observed. Further, the surface crust dynamics were analyzed in comparison with the pan’s moisture regime and other climatic parameters. The results show that the crust dynamics are mainly driven by flooding events in the wet season, but are also influenced by temperature and aeolian activity in the dry season. The approach utilized in this study combines the advantages of multitemporal satellite data for temporal event characterization with advantages from hyperspectral methods for the image and ground data analyses that allow improved mineralogical differentiation and characterization.

Dust Sources in the Salton Sea Basin: A Clear Case of an Anthropogenically Impacted Dust Budget

The Salton Sea Basin in California suffers from poor air quality, and an expanding dry lakebed (playa) presents a new potential dust source. In 2017-18, depositing dust was collected approximately monthly at five sites in the Salton Sea Basin and analyzed for total elemental and soluble anion content. These data were analyzed with Positive Matrix Factorization (PMF). The PMF method resolved seven dust sources with distinct compositional markers: Playa (Mg, SO₄^2-, Na, Ca, Sr), Colorado Alluvium (U, Ca), Local Alluvium (Al, Fe, Ti), Agricultural Burning (K, PO₄^3-), Sea Spray (Na, Cl^-, Se), Anthropogenic Trace Metals (Sb, As, Zn, Cd, Pb, Na), and Anthropogenic Copper (Cu). All sources except Local Alluvium are influenced or caused by current or historic anthropogenic activities. PMF attributed 55 to 80% of the measured dust flux to these six sources. The dust fluxes at the site where the playa source was dominant (89 g m^-2 yr^-1) were less than, but approaching the scale of, those observed at Owens Lake playas in the late 20th century. Playa emissions in the Salton Sea region were most intense during the late spring to early summer and contain high concentrations of evaporite mineral tracers, particularly Mg, Ca, and SO₄^2-.

ClNO2 Production from N2O5 Uptake on Saline Playa Dusts: New Insights into Potential Inland Sources of ClNO2

Nitryl chloride (ClNO₂), formed when dinitrogen pentoxide (N₂O₅) reacts with chloride-containing aerosol, photolyzes to produce chlorine radicals that facilitate the formation of tropospheric ozone. ClNO₂ has been measured in continental areas; however, the sources of particulate chloride required to form ClNO₂ in inland regions remain unclear. Dust emitted from saline playas (e.g., dried lakebeds) contains salts that can potentially form ClNO₂ in inland regions. Here, we present the first laboratory measurements demonstrating the production of ClNO₂ from playa dusts. N₂O₅ reactive uptake coefficients (γ_N2O5) ranged from ∼10^-3 to 10^-1 and ClNO₂ yields (φ_ClNO2) were >50% for all playas tested except one. In general, as the soluble ion fraction of playa dusts increases, γ_N2O5 decreases and φ_ClNO2 increases. We attribute this finding to a transition from aerosol surfaces dominated by silicates that react efficiently with N₂O₅ and produce little ClNO₂ to aerosols that behave like deliquesced chloride-containing salts that generate high yields of ClNO₂. Molecular bromine (Br₂) and nitryl bromide (BrNO₂) were also detected, highlighting that playas facilitate the heterogeneous production of brominated compounds. Our results suggest that parameterizations and models should be updated to include playas as an inland source of aerosol chloride capable of efficiently generating ClNO₂.

Laboratory Studies of the Cloud Droplet Activation Properties and Corresponding Chemistry of Saline Playa Dust

Playas emit large quantities of dust that can facilitate the activation of cloud droplets. Despite the potential importance of playa dusts for cloud formation, most climate models assume that all dust is nonhygroscopic; however, measurements are needed to clarify the role of dusts in aerosol-cloud interactions. Here, we report measurements of CCN activation from playa dusts and parameterize these results in terms of both κ-Köhler theory and adsorption activation theory for inclusion in atmospheric models. κ ranged from 0.002 ± 0.001 to 0.818 ± 0.094, whereas Frankel-Halsey-Hill (FHH) adsorption parameters of A_FHH = 2.20 ± 0.60 and B_FHH = 1.24 ± 0.14 described the water uptake properties of the dusts. Measurements made using aerosol time-of-flight mass spectrometry (ATOFMS) revealed the presence of halite, sodium sulfates, and sodium carbonates that were strongly correlated with κ underscoring the role that mineralogy, including salts, plays in water uptake by dust. Predictions of κ made using bulk chemical techniques generally showed good agreement with measured values. However, several samples were poorly predicted suggesting that chemical heterogeneities as a function of size or chemically distinct particle surfaces can determine the hygroscopicity of playa dusts. Our results further demonstrate the importance of dust in aerosol-cloud interactions.

Ice residual properties in mixed-phase clouds at the high-alpine Jungfraujoch site

Ice residual (IR) and total aerosol properties were measured in mixed-phase clouds (MPCs) at the high-alpine Jungfraujoch research station. Black carbon (BC) content and coating thickness of BC-containing particles were determined using single-particle soot photometers. The ice activated fraction (IAF), derived from a comparison of IR and total aerosol particle size distributions, showed an enrichment of large particles in the IR, with an increase in the IAF from values on the order of 10^-4 to 10^-3 for 100 nm (diameter) particles to 0.2 to 0.3 for 1 μm (diameter) particles. Nonetheless, due to the high number fraction of submicrometer particles with respect to total particle number, IR size distributions were still dominated by the submicrometer aerosol. A comparison of simultaneously measured number size distributions of BC-free and BC-containing IR and total aerosol particles showed depletion of BC by number in the IR, suggesting that BC does not play a significant role in ice nucleation in MPCs at the Jungfraujoch. The potential anthropogenic climate impact of BC via the glaciation effect in MPCs is therefore likely to be negligible at this site and in environments with similar meteorological conditions and a similar aerosol population. The IAF of the BC-containing particles also increased with total particle size, in a similar manner as for the BC-free particles, but on a level 1 order of magnitude lower. Furthermore, BC-containing IR were found to have a thicker coating than the BC-containing total aerosol, suggesting the importance of atmospheric aging for ice nucleation.

Lake Spray Aerosol: A Chemical Signature from Individual Ambient Particles

Aerosol production from wave breaking on freshwater lakes, including the Laurentian Great Lakes, is poorly understood in comparison to sea spray aerosol (SSA). Aerosols from freshwater have the potential to impact regional climate and public health. Herein, lake spray aerosol (LSA) is defined as aerosol generated from freshwater through bubble bursting, analogous to SSA from seawater. A chemical signature for LSA was determined from measurements of ambient particles collected on the southeastern shore of Lake Michigan during an event (July 6-8, 2015) with wave heights up to 3.1 m. For comparison, surface freshwater was collected, and LSA were generated in the laboratory. Single particle microscopy and mass spectrometry analysis of field and laboratory-generated samples show that LSA particles are primarily calcium (carbonate) with lower concentrations of other inorganic ions and organic material. Laboratory number size distributions show ultrafine and accumulation modes at 53 (±1) and 276 (±8) nm, respectively. This study provides the first chemical signature for LSA. LSA composition is shown to be coupled to Great Lakes water chemistry (Ca(2+) > Mg(2+) > Na(+) > K(+)) and distinct from SSA. Understanding LSA physicochemical properties will improve assessment of LSA impacts on regional air quality, climate, and health.

Potential Sites for Ice Nucleation on Aluminosilicate Clay Minerals and Related Materials

Few aerosol particles in clouds nucleate the formation of ice. The surface sites available for nucleus formation, which can include surface defects and functional groups, determine in part the activity of an aerosol particle toward ice formation. Although ice nucleation on particles has been widely studied, exploration of the specific sites at which the initial germ forms has been limited, but is important for predicting the microphysical properties of clouds, which impact climate. This Perspective focuses on what is currently known about surface sites for ice nucleation on aluminosilicate clay minerals, which are commonly found in ice residuals, as well as related materials.

Sources and characteristics of fine particles over the Yellow Sea and Bohai Sea using online single particle aerosol mass spectrometer

Marine aerosols over the East China Seas are heavily polluted by continental sources. During the Chinese Comprehensive Ocean Experiment in November 2012, size and mass spectra of individual atmospheric particles in the size range from 0.2 to 2.0 μm were measured on board by a single particle aerosol mass spectrometer (SPAMS). The average hourly particle number (PN) was around 4560±3240 in the South Yellow Sea (SYS), 2900±3970 in the North Yellow Sea (NYS), and 1700±2220 in the Bohai Sea (BS). PN in NYS and BS varied greatly over 3 orders of magnitude, while that in SYS varied slightly. The size distributions were fitted with two log-normal modes. Accumulation mode dominated in NYS and BS, especially during episodic periods. Coarse mode particles played an important role in SYS. Particles were classified using an adaptive resonance theory based neural network algorithm (ART-2a). Six particle types were identified with secondary-containing, aged sea-salt, soot-like, biomass burning, fresh sea-salt, and lead-containing particles accounting for 32%, 21%, 18%, 16%, 4%, and 3% of total PN, respectively. Aerosols in BS were relatively enriched in particles from anthropogenic sources compared to SYS, probably due to emissions from more developed upwind regions and indicating stronger influence of continental outflow on marine environment. Variation of source types depended mainly on origins of transported air masses. This study examined rapid changes in PN, size distribution and source types of fine particles in marine atmospheres. It also demonstrated the effectiveness of high-time-resolution source apportionment by ART-2a.

Microscopic evaluation of trace metals in cloud droplets in an acid precipitation region

Mass concentrations of soluble trace metals and size, number, and mixing properties of nanometal particles in clouds determine their toxicity to ecosystems. Cloud water was found to be acidic, with a pH of 3.52, at Mt. Lu (elevation 1,165 m) in an acid precipitation region in South China. A combination of Inductively Coupled Plasma Mass Spectrometry (ICPMS) and Transmission Electron Microscopy (TEM) for the first time demonstrates that the soluble metal concentrations and solid metal particle number are surprisingly high in acid clouds at Mt. Lu, where daily concentrations of SO2, NO2, and PM10 are 18 μg m(-3), 7 μg m(-3), and 22 μg m(-3). The soluble metals in cloudwater with the highest concentrations were zinc (Zn, 200 μg L(-1)), iron (Fe, 88 μg L(-1)), and lead (Pb, 77 μg L(-1)). TEM reveals that 76% of cloud residues include metal particles that range from 50 nm to 1 μm diameter with a median diameter of 250 nm. Four major metal-associated particle types are Pb-rich (35%), fly ash (27%), Fe-rich (23%), and Zn-rich (15%). Elemental mapping shows that minor soluble metals are distributed within sulfates of cloud residues. Emissions of fine metal particles from large, nonferrous industries and coal-fired power plants with tall stacks were transported upward to this high elevation. Our results suggest that the abundant trace metals in clouds aggravate the impacts of acid clouds or associated precipitation on the ecosystem and human health.

Mass spectrometry of atmospheric aerosols--recent developments and applications. Part II: On-line mass spectrometry techniques

Many of the significant advances in our understanding of atmospheric particles can be attributed to the application of mass spectrometry. Mass spectrometry provides high sensitivity with fast response time to probe chemically complex particles. This review focuses on recent developments and applications in the field of mass spectrometry of atmospheric aerosols. In Part II of this two-part review, we concentrate on real-time mass spectrometry techniques, which provide high time resolution for insight into brief events and diurnal changes while eliminating the potential artifacts acquired during long-term filter sampling. In particular, real-time mass spectrometry has been shown recently to provide the ability to probe the chemical composition of ambient individual particles <30 nm in diameter to further our understanding of how particles are formed through nucleation in the atmosphere. Further, transportable real-time mass spectrometry techniques are now used frequently on ground-, ship-, and aircraft-based studies around the globe to further our understanding of the spatial distribution of atmospheric aerosols. In addition, coupling aerosol mass spectrometry techniques with other measurements in series has allowed the in situ determination of chemically resolved particle effective density, refractive index, volatility, and cloud activation properties.