Full-waveform inversion reveals diverse origins of lower mantle positive wave speed anomalies

Determining Earth's structure is paramount to unravel its interior dynamics. Seismic tomography reveals positive wave speed anomalies throughout the mantle that spatially correlate with the expected locations of subducted slabs. This correlation has been widely applied in plate reconstructions and geodynamic modelling. However, global travel-time tomography typically incorporates only a limited number of easily identifiable body wave phases and is therefore strongly dependent on the source-receiver geometry. Here, we show how global full-waveform inversion is less sensitive to source-receiver geometry and reveals numerous previously undetected positive wave speed anomalies in the lower mantle. Many of these previously undetected anomalies are situated below major oceans and continental interiors, with no geologic record of subduction, such as beneath the western Pacific Ocean. Moreover, we find no statistically significant correlation positive anomalies as imaged using full-waveform inversion and past subduction. These findings suggest more diverse origins for these anomalies in Earth's lower mantle, unlocking full-waveform inversion as an indispensable tool for mantle exploration.

Spreading ridge migration enabled by plume-ridge de-anchoring

It has long been recognised that spreading ridges are kept in place by competing subduction forces that drive plate motions. Asymmetric strain rates pull spreading ridges in the direction of the strongest slab pull force, which partially explains why spreading ridges can migrate vast distances. However, the interaction between mantle plumes and spreading ridges plays a relatively unknown role on the evolution of plate boundaries. Using a numerical model of mantle convection, we show that plumes with high buoyancy flux (>3000 kg/s) can capture spreading ridges within a 1000 km radius and anchor them in place. Exceptionally high buoyancy fluxes may fragment the overriding plate into smaller plates to accommodate more efficient plate motion. If the plume buoyancy flux wanes below 1000 kg/s the ridge may be de-anchored, leading to rapid ridge migration rates when combined with asymmetric plate boundary forces. Our results show that plume-ridge de-anchoring may have contributed to the rapid migration of the SE Indian Ridge from 43 million years ago (Ma) due to waning buoyancy flux from the Kerguelen plume, supported by magma flux estimates and radiogenic isotope geochemistry of eruption products. The plume-ridge de-anchoring mechanism we have identified has global implications for the evolution of plate boundaries near mantle plumes.

Assessing plate reconstruction models using plate driving force consistency tests

Plate reconstruction models are constructed to fit constraints such as magnetic anomalies, fracture zones, paleomagnetic poles, geological observations and seismic tomography. However, these models do not consider the physical equations of plate driving forces when reconstructing plate motion. This can potentially result in geodynamically-implausible plate motions, which has implications for a range of work based on plate reconstruction models. We present a new algorithm that calculates time-dependent slab pull, ridge push (GPE force) and mantle drag resistance for any topologically closed reconstruction, and evaluates the residuals-or missing components-required for torques to balance given our assumed plate driving force relationships. In all analyzed models, residual torques for the present-day are three orders of magnitude smaller than the typical driving torques for oceanic plates, but can be of the same order of magnitude back in time-particularly from 90 to 50 Ma. Using the Pacific plate as an example, we show how our algorithm can be used to identify areas and times with high residual torques, where either plate reconstructions have a high degree of geodynamic implausibility or our understanding of the underlying geodynamic forces is incomplete. We suggest strategies for plate model improvements and also identify times when other forces such as active mantle flow were likely important contributors. Our algorithm is intended as a tool to help assess and improve plate reconstruction models based on a transparent and expandable set of a priori dynamic constraints.

Mapping global kimberlite potential from reconstructions of mantle flow over the past billion years

Kimberlites are the primary source of economic grade diamonds. Their geologically rapid eruptions preferentially occur near or through thick and ancient continental lithosphere. Studies combining tomographic models with tectonic reconstructions and kimberlite emplacement ages and locations have revealed spatial correlations between large low shear velocity provinces in the lowermost mantle and reconstructed global kimberlite eruption locations over the last 320 Myr. These spatial correlations assume that the lowermost mantle structure has not changed over time, which is at odds with mantle flow models that show basal thermochemical structures to be mobile features shaped by cold sinking oceanic lithosphere. Here we investigate the match to the global kimberlite record of stationary seismically slow basal mantle structures (as imaged through tomographic modelling) and mobile hot basal structures (as predicted by reconstructions of mantle flow over the past billion years). We refer to these structures as “basal mantle structures” and consider their intersection with reconstructed thick or ancient lithosphere to represent areas with a high potential for past eruptions of kimberlites, and therefore areas of potential interest for diamond exploration. We use the distance between reconstructed kimberlite eruption locations and kimberlite potential maps as an indicator of model success, and we find that mobile lowermost mantle structures are as close to reconstructed kimberlites as stationary ones. Additionally, we find that mobile lowermost mantle structures better fit major kimberlitic events, such as the South African kimberlite bloom around 100 Ma. Mobile basal structures are therefore consistent with both solid Earth dynamics and with the kimberlite record.

Assembly of the basal mantle structure beneath Africa

Plate tectonics shapes Earth's surface, and is linked to motions within its deep interior^1,2. Cold oceanic lithosphere sinks into the mantle, and hot mantle plumes rise from the deep Earth, leading to volcanism^3,4. Volcanic eruptions over the past 320 million years have been linked to two large structures at the base of the mantle presently under Africa and the Pacific Ocean^5,6. This has led to the hypothesis that these basal mantle structures have been stationary over geological time^7,8, in contrast to observations and models suggesting that tectonic plates^9,10, subduction zones^11-14 and mantle plumes^15,16 have been mobile, and that basal mantle structures are presently deforming^17,18. Here we reconstruct mantle flow from one billion years ago to the present day to show that the history of volcanism is statistically as consistent with mobile basal mantle structures as with fixed ones. In our reconstructions, cold lithosphere sank deep into the African hemisphere between 740 and 500 million years ago, and from 400 million years ago the structure beneath Africa progressively assembled, pushed by peri-Gondwana slabs, to become a coherent structure as recently as 60 million years ago. Our mantle flow models suggest that basal mantle structures are mobile, and aggregate and disperse over time, similarly to continents at Earth's surface⁹. Our models also predict the presence of continental material in the mantle beneath Africa, consistent with geochemical data^19,20.

Catastrophic slab loss in southwestern Pangea preserved in the mantle and igneous record

The Choiyoi Magmatic Province represents a major episode of silicic magmatism in southwestern Pangea in the mid-Permian-Triassic, the origin of which remains intensely debated. Here, we integrate plate-kinematic reconstructions and the lower mantle slab record beneath southwestern Pangea that provide clues on late Paleozoic-Mesozoic subducting slab configurations. Also, we compile geochronological information and analyze geochemical data using tectono-magmatic discrimination diagrams. We demonstrate that this magmatic event resulted from a large-scale slab loss. This is supported by a paleogeographic coincidence between a reconstructed 2,800-3,000-km-wide slab gap and the Choiyoi Magmatic Province and geochemical data indicating a slab break-off fingerprint in the latter. The slab break-off event is compatible with Permian paleogeographic modifications in southwestern Pangea. These findings render the Choiyoi Magmatic Province the oldest example of a geophysically constrained slab loss event and open new avenues to assess the geodynamic setting of silicic large igneous provinces back to the late Paleozoic.

The origin of the Permian-Triassic Choiyoi silicic large igneous province (SLIP) is assessed by linking the igneous record, plate-kinematic reconstructions, and the deep mantle. This study suggests an origin related to a massive slab loss in Pangea.

What drives tectonic plates?

Does Earth's mantle drive plates, or do plates drive mantle flow? This long-standing question may be ill posed, however, as both the lithosphere and mantle belong to a single self-organizing system. Alternatively, this question is better recast as follows: Does the dynamic balance between plates and mantle change over long-term tectonic reorganizations, and at what spatial wavelengths are those processes operating? A hurdle in answering this question is in designing dynamic models of mantle convection with realistic tectonic behavior evolving over supercontinent cycles. By devising these models, we find that slabs pull plates at rapid rates and tear continents apart, with keels of continents only slowing down their drift when they are not attached to a subducting plate. Our models show that the tectonic tessellation varies at a higher degree than mantle flow, which partly unlocks the conceptualization of plate tectonics and mantle convection as a unique, self-consistent system.

Northward drift of the Azores plume in the Earth's mantle

Mantle plume fixity has long been a cornerstone assumption to reconstruct past tectonic plate motions. However, precise geochronological and paleomagnetic data along Pacific continuous hotspot tracks have revealed substantial drift of the Hawaiian plume. The question remains for evidence of drift for other mantle plumes. Here, we use plume-derived basalts from the Mid-Atlantic ridge to confirm that the upper-mantle thermal anomaly associated with the Azores plume is asymmetric, spreading over ~2,000 km southwards and ~600 km northwards. Using for the first time a 3D-spherical mantle convection where plumes, ridges and plates interact in a fully dynamic way, we suggest that the extent, shape and asymmetry of this anomaly is a consequence of the Azores plume moving northwards by 1-2 cm/yr during the past 85 Ma, independently from other Atlantic plumes. Our findings suggest redefining the Azores hotspot track and open the way for identifying how plumes drift within the mantle.

The role of diffusion-driven pure climb creep on the rheology of bridgmanite under lower mantle conditions

The viscosity of Earth’s lower mantle is poorly constrained due to the lack of knowledge on some fundamental variables that affect the deformation behaviour of its main mineral phases. This study focuses on bridgmanite, the main lower mantle constituent, and assesses its rheology by developing an approach based on mineral physics. Following and revising the recent advances in this field, pure climb creep controlled by diffusion is identified as the key mechanism driving deformation in bridgmanite. The strain rates of this phase under lower mantle pressures, temperatures and stresses are thus calculated by constraining diffusion and implementing a creep theoretical model. The viscosity of MgSiO₃ bridgmanite resulting from pure climb creep is consequently evaluated and compared with the viscosity profiles available from the literature. We show that the inferred variability of viscosity in these profiles can be fully accounted for with the chosen variables of our calculation, e.g., diffusion coefficients, vacancy concentrations and applied stresses. A refinement of these variables is advocated in order to further constrain viscosity and match the observables.

On the consistency of seismically imaged lower mantle slabs

The geoscience community is increasingly utilizing seismic tomography to interpret mantle heterogeneity and its links to past tectonic and geodynamic processes. To assess the robustness and distribution of positive seismic anomalies, inferred as subducted slabs, we create a set of vote maps for the lower mantle with 14 global P-wave or S-wave tomography models. Based on a depth-dependent threshold metric, an average of 20% of any given tomography model depth is identified as a potential slab. However, upon combining the 14 models, the most consistent positive wavespeed features are identified by an increasing vote count. An overall peak in the most robust anomalies is found between 1000-1400 km depth, followed by a decline to a minimum around 2000 km. While this trend could reflect reduced tomographic resolution in the middle mantle, we show that it may alternatively relate to real changes in the time-dependent subduction flux and/or a mid-lower mantle viscosity increase. An apparent secondary peak in agreement below 2500 km depth may reflect the degree-two lower mantle slow seismic structures. Vote maps illustrate the potential shortcomings of using a limited number or type of tomography models and slab threshold criteria.

Subduction controls the distribution and fragmentation of Earth’s tectonic plates

The theory of plate tectonics describes how the surface of Earth is split into an organized jigsaw of seven large plates of similar sizes and a population of smaller plates whose areas follow a fractal distribution. The reconstruction of global tectonics during the past 200 million years suggests that this layout is probably a long-term feature of Earth, but the forces governing it are unknown. Previous studies, primarily based on the statistical properties of plate distributions, were unable to resolve how the size of the plates is determined by the properties of the lithosphere and the underlying mantle convection. Here we demonstrate that the plate layout of Earth is produced by a dynamic feedback between mantle convection and the strength of the lithosphere. Using three-dimensional spherical models of mantle convection that self-consistently produce the plate size–frequency distribution observed for Earth, we show that subduction geometry drives the tectonic fragmentation that generates plates. The spacing between the slabs controls the layout of large plates, and the stresses caused by the bending of trenches break plates into smaller fragments. Our results explain why the fast evolution in small back-arc plates reflects the marked changes in plate motions during times of major reorganizations. Our study opens the way to using convection simulations with plate-like behaviour to unravel how global tectonics and mantle convection are dynamically connected.

Pangea breakup and northward drift of the Indian subcontinent reproduced by a numerical model of mantle convection

Since around 200 Ma, the most notable event in the process of the breakup of Pangea has been the high speed (up to 20 cm yr(-1)) of the northward drift of the Indian subcontinent. Our numerical simulations of 3-D spherical mantle convection approximately reproduced the process of continental drift from the breakup of Pangea at 200 Ma to the present-day continental distribution. These simulations revealed that a major factor in the northward drift of the Indian subcontinent was the large-scale cold mantle downwelling that developed spontaneously in the North Tethys Ocean, attributed to the overall shape of Pangea. The strong lateral mantle flow caused by the high-temperature anomaly beneath Pangea, due to the thermal insulation effect, enhanced the acceleration of the Indian subcontinent during the early stage of the Pangea breakup. The large-scale hot upwelling plumes from the lower mantle, initially located under Africa, might have contributed to the formation of the large-scale cold mantle downwelling in the North Tethys Ocean.

Mineral phases of the Earth´s mantle

Our knowledge of the structure of the Earth´s interior has been obtained by analysing seismic waves that travel in the Earth, and the reference Earth global models used by geophysicists are essentially seismological. Depth profiles of the seismic waves velocities reveal that the deep Earth is divided in several shells, separated by velocity and density discontinuities. The main discontinuity located at a depth of 2900 km corresponds to the transition between the mantle and the core. The Earth´s mantle can be further divided into the upper mantle and the lower mantle, with a transition zone characterised by two prominent increases in velocities observed at 410- and 660-km depths. This article will be focused on the mineral phases of the Earth´s mantle. The interpretation of seismological models in terms of chemical composition and temperature relies on the knowledge of the nature, structure and elastic properties of the candidate materials. We will describe to what extent recent advances in experimental mineral physics and X-ray diffraction have yielded essential knowledge on the structure and high-pressure high-temperature behaviour of pertinent materials, and major improvements in our understanding of the chemical and mineralogical composition of the Earth´s mantle.

On the origin of noble gases in mantle plumes

The chemical differences between deep- and shallow-mantle sources of oceanic basalts provide evidence that several distinct components coexist within the Earth's mantle. Most of these components have been identified as recycled in origin. However, the noble-gas signature is still a matter of debate and questions the preservation of primitive regions in the convective mantle. We show that a model where the noble-gas signature observed in Hawaii and Iceland comes from a pristine homogeneous deep layer would imply a primitive (3)He content and (3)He/(22)Ne ratio that are very unlikely. On the contrary, mass balances show that the partly degassed peridotite of a marble-cake mantle can be the noble-gas end-member with an apparent 'primitive'-like composition. This component is mixed with recycled oceanic crust in different proportions in the plume sources and in the shallow mantle. A recycling model of the mantle, involving gravitational segregation of the oceanic crust at the bottom of the mantle, potentially satisfies trace-element as well as noble-gas constraints.

Mantle-circulation models with sequential data assimilation: inferring present-day mantle structure from plate-motion histories

Data assimilation is an approach to studying geodynamic models consistent simultaneously with observables and the governing equations of mantle flow. Such an approach is essential in mantle circulation models, where we seek to constrain an unknown initial condition some time in the past, and thus cannot hope to use first-principles convection calculations to infer the flow history of the mantle. One of the most important observables for mantle-flow history comes from models of Mesozoic and Cenozoic plate motion that provide constraints not only on the surface velocity of the mantle but also on the evolution of internal mantle-buoyancy forces due to subducted oceanic slabs. Here we present five mantle circulation models with an assimilated plate-motion history spanning the past 120 Myr, a time period for which reliable plate-motion reconstructions are available. All models agree well with upper- and mid-mantle heterogeneity imaged by seismic tomography. A simple standard model of whole-mantle convection, including a factor 40 viscosity increase from the upper to the lower mantle and predominantly internal heat generation, reveals downwellings related to Farallon and Tethys subduction. Adding 35% bottom heating from the core has the predictable effect of producing prominent high-temperature anomalies and a strong thermal boundary layer at the base of the mantle. Significantly delaying mantle flow through the transition zone either by modelling the dynamic effects of an endothermic phase reaction or by including a steep, factor 100, viscosity rise from the upper to the lower mantle results in substantial transition-zone heterogeneity, enhanced by the effects of trench migration implicit in the assimilated plate-motion history. An expected result is the failure to account for heterogeneity structure in the deepest mantle below 1500 km, which is influenced by Jurassic plate motions and thus cannot be modelled from sequential assimilation of plate motion histories limited in age to the Cretaceous. This result implies that sequential assimilation of past plate-motion models is ineffective in studying the temporal evolution of core-mantle-boundary heterogeneity, and that a method for extrapolating present-day information backwards in time is required. For short time periods (of the order of perhaps a few tens of Myr) such a method exists in the form of crude 'backward' convection calculations. For longer time periods (of the order of a mantle overturn), a rigorous approach to extrapolating information back in time exists in the form of iterative nonlinear optimization methods that carry assimilated information into the past through the use of an adjoint mantle convection model.

How mantle slabs drive plate tectonics

The gravitational pull of subducted slabs is thought to drive the motions of Earth's tectonic plates, but the coupling between slabs and plates is not well established. If a slab is mechanically attached to a subducting plate, it can exert a direct pull on the plate. Alternatively, a detached slab may drive a plate by exciting flow in the mantle that exerts a shear traction on the base of the plate. From the geologic history of subduction, we estimated the relative importance of "pull" versus "suction" for the present-day plates. Observed plate motions are best predicted if slabs in the upper mantle are attached to plates and generate slab pull forces that account for about half of the total driving force on plates. Slabs in the lower mantle are supported by viscous mantle forces and drive plates through slab suction.

The mantle flow field beneath western North America

Although motions at the surface of tectonic plates are well determined, the accompanying horizontal mantle flow is not. We have combined observations of surface deformation and upper mantle seismic anisotropy to estimate this flow field for western North America. We find that the mantle velocity is 5.5 +/- 1.5 centimeters per year due east in a hot spot reference frame, nearly opposite to the direction of North American plate motion (west-southwest). The flow is only weakly coupled to the motion of the surface plate, producing a small drag force. This flow field is probably due to heterogeneity in mantle density associated with the former Farallon oceanic plate beneath North America.

Sea level change through the last glacial cycle

Sea level change during the Quaternary is primarily a consequence of the cyclic growth and decay of ice sheets, resulting in a complex spatial and temporal pattern. Observations of this variability provide constraints on the timing, rates, and magnitudes of the changes in ice mass during a glacial cycle, as well as more limited information on the distribution of ice between the major ice sheets at any time. Observations of glacially induced sea level changes also provide information on the response of the mantle to surface loading on time scales of 10(3) to 10(5) years. Regional analyses indicate that the earth-response function is depth dependent as well as spatially variable. Comprehensive models of sea level change enable the migration of coastlines to be predicted during glacial cycles, including the anthropologically important period from about 60,000 to 20,000 years ago.

Normal-mode and free-Air gravity constraints on lateral variations in velocity and density of Earth's mantle

With the use of a large collection of free-oscillation data and additional constraints imposed by the free-air gravity anomaly, lateral variations in shear velocity, compressional velocity, and density within the mantle; dynamic topography on the free surface; and topography on the 660-km discontinuity and the core-mantle boundary were determined. The velocity models are consistent with existing models based on travel-time and waveform inversions. In the lowermost mantle, near the core-mantle boundary, denser than average material is found beneath regions of upwellings centered on the Pacific Ocean and Africa that are characterized by slow shear velocities. These anomalies suggest the existence of compositional heterogeneity near the core-mantle boundary.

Lateral variations in Compressional/Shear velocities at the base of the mantle

Observations of core-diffracted P (Pdiff) and SH (SHdiff) waves recorded by the Missouri-to-Massachusetts (MOMA) seismic array show that the ratio of compressional (P) seismic velocities to horizontal shear (SH) velocities at the base of the mantle changes abruptly from beneath the mid-Pacific (VP/VS = 1.88, also the value predicted by reference Earth models) to beneath Alaska (VP/VS = 1.83). This change signifies a sudden lateral variation in material properties that may have a mineralogical or textural origin. A textural change could be a result of shear stresses induced during the arrival at the core of ancient lithosphere from the northern Pacific paleotrench.

Time scales and heterogeneous structure in geodynamic earth models

Computer models of mantle convection constrained by the history of Cenozoic and Mesozoic plate motions explain some deep-mantle structural heterogeneity imaged by seismic tomography, especially those related to subduction. They also reveal a 150-million-year time scale for generating thermal heterogeneity in the mantle, comparable to the record of plate motion reconstructions, so that the problem of unknown initial conditions can be overcome. The pattern of lowermost mantle structure at the core-mantle boundary is controlled by subduction history, although seismic tomography reveals intense large-scale hot (low-velocity) upwelling features not explicitly predicted by the models.