The relation between growth of four microbes on six different plasterboards and biological activity of spores

Artificial vs natural Stachybotrys infestation-Comparison of mycotoxin production on various building materials

The genus Stachybotrys belongs to filamentous fungi found in indoor environment, mostly on cellulose-rich substrates after water-damage. The major purpose of this study was to investigate the influence of different building materials in case of mold infestation on the mycotoxin production of Stachybotrys species. Fifteen Stachybotrys mycotoxins including satratoxins, phenylspirodrimanes, and recently discovered stachybotrychromenes were in the focus of the investigations. Artificial and natural infestations were compared to determine whether environmental factors, for example, time of growth, temperature, humidity, and material additives have an influence on the observed mycotoxin profiles. It turned out that mycotoxin profiles from Stachybotrys spp. on building materials can be influenced by cellulose, paints, and paste of the materials. The total toxin levels of artificially and naturally contaminated gypsum board samples ranged up to 30 µg/cm² , whereas wallpaper samples showed total toxin levels in the range of 20-66 µg/cm² . A naturally infested sample disclosed the conversion of the dialdehyde components to the corresponding lactone isomers under the influence of light.

Characterization and pro-inflammatory potential of indoor mold particles

A number of epidemiological studies find an association between indoor air dampness and respiratory health effects. This is often suggested to be linked to enhanced mold growth. However, the role of mold is obviously difficult to disentangle from other dampness-related exposure including microbes as well as non-biological particles and chemical pollutants. The association may partly be due to visible mycelial growth and a characteristic musty smell of mold. Thus, the potential role of mold exposure should be further explored by evaluating information from experimental studies elucidating possible mechanistic links. Such studies show that exposure to spores and hyphal fragments may act as allergens and pro-inflammatory mediators and that they may damage airways by the production of toxins, enzymes, and volatile organic compounds. In the present review, we hypothesize that continuous exposure to mold particles may result in chronic low-grade pro-inflammatory responses contributing to respiratory diseases. We summarize some of the main methods for detection and characterization of fungal aerosols and highlight in vitro research elucidating how molds may induce toxicity and pro-inflammatory reactions in human cell models relevant for airway exposure. Data suggest that the fraction of fungal hyphal fragments in indoor air is much higher than that of airborne spores, and the hyphal fragments often have a higher pro-inflammatory potential. Thus, hyphal fragments of prevalent mold species with strong pro-inflammatory potential may be particularly relevant candidates for respiratory diseases associated with damp/mold-contaminated indoor air. Future studies linking of indoor air dampness with health effects should assess the toxicity and pro-inflammatory potential of indoor air particulate matter and combined this information with a better characterization of biological components including hyphal fragments from both pathogenic and non-pathogenic mold species. Such studies may increase our understanding of the potential role of mold exposure.

Aerated Cement Slurry and Controlling Fungal Growth of Low-Cost Biomass-Based Insulation Materials

Wood chips or particles as well as shredded straw offer desired thermal insulation qualities. When exposed to a humid environment, however, fungal growth on wood and straw is an important consideration. An experimental investigation was conducted in order to evaluate the effectiveness of a simple treatment in mitigating fungal growth on wood- and straw-based insulation. This treatment involved blending of wood chips or particles, or shredded straw with an aerated slurry which offers the potential to mitigate fungal growth on biomass by a combination of physical and chemical effects without imposing a weight penalty. Experimental results verified the effectiveness of this treatment in controlling fungal growth on wood and straw subjected to different moisture conditions.

Development and Regression Modeling of Dirt Resistive Latex Façade Paint

A highly dirt-resistant paint for building façades without chemicals harmful to nature and the environment would resolve the unattractive disfigurement of building walls caused by dirt. The current ranking of Pakistan in terms of air pollution is 139th. A set of dirt-resistant paint formulae was constructed with the aid of computer programming. From this set, the best dirt-resistant paint formula was explored and identified. The final determination of the optimum formulation was based on statistically planned experiments conducted in the laboratory and in a natural environment. In order to achieve high-quality results, the best available laboratory equipment were used. The results obtained were analyzed and conclusions were drawn using appropriate statistical techniques. The procedure started with the selection of appropriate raw materials and generation of a target population of 543,143 paint formulations by adopting Basic Language computer programming. The average pigment volume concentration (PVC) percentage was computed using theory and found to be 54.98% for the target population paint formulations, verifying the literature results. Experimentation and statistical analysis were performed to compare the classical conventional agitator with the latest lab equipment such as a nano mill, and it was concluded that the nano mill performs better on average than the conventional agitator in the preparation of paint formulations. Hence, the sample of paint formulations was prepared on a nano mill and tested in the laboratory using advanced available technology for the analysis and comparison of paint properties to determine the best paint formulation. The results were analyzed using the Analysis of Variance (ANOVA) technique, and it was concluded that the newly developed paint has the highest dirt resistance on average. The final selected formula, No. 50 (the newly developed paint), was compared with the three best conventional paints available in the Pakistan market in a natural environment for a period of almost one year. A regression model was also constructed to study the effect of environmental factors like time, temperature, and humidity on the dirt resistance of paints. It was found that the newly developed paint formulation is the most environmentally friendly. It performs equally well as one conventional paint and has higher dirt resistance than two other conventional paint formulations containing harmful chemicals. The regression model of dirt resistance involving variables including time, temperature, and humidity shows that these factors significantly affect the dirt resistance of a given paint at a 5% level of significance. For a given paint, 95.34% of the variation in the dirt resistance is due to and explained by the given factors. The regression model is useful for predicting the average dirt resistance of a given paint with a certain level of confidence. The project exemplifies the work of applied research from conceptualization to successful commercialization in the paint industry.

Fungal Microbiomes Associated with Green and Non-Green Building Materials

Water-damaged buildings can lead to fungal growth and occupant health problems. Green building materials, derived from renewable sources, are increasingly utilized in construction and renovations. However, the question as to what fungi will grow on these green compared to non-green materials, after they get wet, has not been adequately studied. By determining what fungi grow on each type of material, the potential health risks can be more adequately assessed. In this study, we inoculated green and non-green pieces of ceiling tile, composite board, drywall, and flooring with indoor dust containing a complex mixture of naturally occurring fungi. The materials were saturated with water and incubated for two months in a controlled environment. The resulting fungal microbiomes were evaluated using ITS amplicon sequencing. Overall, the richness and diversity of the mycobiomes on each pair of green and non-green pieces were not significantly different. However, different genera dominated on each type of material. For example, Aspergillus spp. had the highest relative abundance on green and non-green ceiling tiles and green composite boards, but Peniophora spp. dominated the non-green composite board. In contrast, Penicillium spp. dominated green and non-green flooring samples. Green gypsum board was dominated by Phialophora spp. and Stachybotrys spp., but non-green gypsum board by Myrothecium spp. These data suggest that water-damaged green and non-green building materials can result in mycobiomes that are dominated by fungal genera whose member species pose different potentials for health risks.

Moisture parameters and fungal communities associated with gypsum drywall in buildings

Uncontrolled excess moisture in buildings is a common problem that can lead to changes in fungal communities. In buildings, moisture parameters can be classified by location and include assessments of moisture in the air, at a surface, or within a material. These parameters are not equivalent in dynamic indoor environments, which makes moisture-induced fungal growth in buildings a complex occurrence. In order to determine the circumstances that lead to such growth, it is essential to have a thorough understanding of in situ moisture measurement, the influence of building factors on moisture parameters, and the levels of these moisture parameters that lead to indoor fungal growth. Currently, there are disagreements in the literature on this topic. A literature review was conducted specifically on moisture-induced fungal growth on gypsum drywall. This review revealed that there is no consistent measurement approach used to characterize moisture in laboratory and field studies, with relative humidity measurements being most common. Additionally, many studies identify a critical moisture value, below which fungal growth will not occur. The values defined by relative humidity encompassed the largest range, while those defined by moisture content exhibited the highest variation. Critical values defined by equilibrium relative humidity were most consistent, and this is likely due to equilibrium relative humidity being the most relevant moisture parameter to microbial growth, since it is a reasonable measure of moisture available at surfaces, where fungi often proliferate. Several sources concur that surface moisture, particularly liquid water, is the prominent factor influencing microbial changes and that moisture in the air and within a material are of lesser importance. However, even if surface moisture is assessed, a single critical moisture level to prevent fungal growth cannot be defined, due to a number of factors, including variations in fungal genera and/or species, temperature, and nutrient availability. Despite these complexities, meaningful measurements can still be made to inform fungal growth by making localised, long-term, and continuous measurements of surface moisture. Such an approach will capture variations in a material's surface moisture, which could provide insight on a number of conditions that could lead to fungal proliferation.

Mold spore penetration through wall service outlets: a pilot study

A pilot study was conducted to estimate fungal spore penetration for wall service outlets subjected to a constant air pressure. During the laboratory experiment, a wall chamber was fabricated, and telephone, electrical, and cable service outlets were installed. Penicillium chrysogenum spores were aerosolized into the chamber that was held under pressure. Spores that penetrated the outlets were funneled into an impinger for microscopic enumeration. Thirty trials were conducted for each of the five outlets (N = 150), and the wall chamber was decontaminated between trials. Results of an analysis of variance suggest wall service outlets allow spore penetration. The penetration factor for the telephone outlet was significantly greater than all other outlets (p < 0.05), and there was no difference in penetration between electrical outlets with and without plugs. Penetration factor differences were attributed to air leakage rates across the outlets. Due to the experimental design and equipment limitations, further research is needed to support these findings.

Fungal spores: a critical review of the toxicological and epidemiological evidence as a basis for occupational exposure limit setting

Fungal spores are ubiquitous in the environment. However, exposure levels in workplaces where mouldy materials are handled are much higher than in common indoor and outdoor environments. Spores of all tested species induced inflammation in experimental studies. The response to mycotoxin-producing and pathogenic species was much stronger. In animal studies, nonallergic responses dominated after a single dose. Allergic responses also occurred, especially to mycotoxin-producing and pathogenic species, and after repeated exposures. Inhalation of a single spore dose by subjects with sick building syndrome indicated no observed effect levels of 4 x 10(3) Trichoderma harzianum spores/m(3) and 8 x 10(3) Penicillium chrysogenum spores/m(3) for lung function, respiratory symptoms, and inflammatory cells in the blood. In asthmatic patients allergic to Penicillium sp. or Alternaria alternata, lowest observed effect levels (LOELs) for reduced airway conductance were 1 x 10(4) and 2 x 10(4) spores/m(3), respectively. In epidemiological studies of highly exposed working populations lung function decline, respiratory symptoms and airway inflammation began to appear at exposure levels of 10(5) spores/m(3). Thus, human challenge and epidemiological studies support fairly consistent LOELs of approximately 10(5) spores/m(3) for diverse fungal species in nonsensitised populations. Mycotoxin-producing and pathogenic species have to be detected specifically, however, because of their higher toxicity.

Sarcoidosis, asthma, and asthma-like symptoms among occupants of a historically water-damaged office building

Sarcoidosis is a granulomatous disease of unknown etiology with evidence of association with exposure to microbial agents. In June 2006, we investigated a sarcoidosis cluster among office workers in a water-damaged building. In the course of the investigation, we became aware of a high rate of respiratory complaints including asthma and asthma-like symptoms. We conducted case finding for physician-diagnosed sarcoidosis and asthma and administered a health questionnaire survey and pulmonary function tests (PFTs) to consenting occupants. We compared prevalence ratios (PRs) to the Environmental Protection Agency's Building Assessment Survey and Evaluation study (BASE) and the National Health and Nutrition Examination Survey (NHANES). We identified six sarcoidosis cases. The current building prevalence is 2206 cases/100,000 population, elevated, compared with the US population range of <1-40 cases/100,000. Of current occupants, 77% (105) participated in the health questionnaire survey and 64% (87) in PFTs. Physician-diagnosed asthma was elevated, compared with the US adult population. Adult asthma incidence was 3.3/1000 person-years during the period before building occupancy and 11.5/1000 person-years during the period after building occupancy. Comparisons with US office workers (BASE) yielded elevated PRs for shortness of breath [PR, 9.6; 95% confidence interval (CI), 6.1-15.2], wheeze (PR, 9.1; 95% CI 5.6-14.6), and chest tightness (PR, 5.1; 95% CI 2.8-9.0). PFT results supported reports of respiratory symptoms and diagnoses. Based on our findings building occupants were relocated.

PRACTICAL IMPLICATIONS

The remission of occupational asthma caused by certain known antigens improves with early diagnosis and removal from exposure. As a suspected antigen-mediated disease, sarcoidosis might also benefit if affected persons are isolated from continued exposure. Our investigation identified a high prevalence of new-onset sarcoidosis, and asthma among workers of a water damaged building with a history of indoor environmental quality complaints. Removal of all individuals from such environments until completion of building diagnostics, environmental sampling and complete remediation is a prudent measure when feasible.

Size-fractionated (1-->3)-beta-D-glucan concentrations aerosolized from different moldy building materials

Release of submicrometer-sized fungal fragments (<1.0 microm) was discovered in earlier studies, which investigated the aerosolization of spores from moldy surfaces. However, the contribution of fungal fragments to total mold exposure is poorly characterized. The purpose of this study was to investigate the size-fractionated concentrations of particulate (1-->3)-beta-D-glucan and numbers of particles aerosolized from the surface of artificially mold-contaminated materials using a novel sampling methodology. Aspergillus versicolor and Stachybotrys chartarum were grown on malt extract agar and building materials (ceiling tiles and gypsum board) for one to six months. Fungal particles released from these materials were collected size-selectively by a newly developed Fragment Sampling System, and (1-->3)-beta-D-glucan in air samples was analyzed by Limulus Amebocyte lysate (LAL) assay. The concentrations of (1-->3)-beta-D-glucan varied from 0.4x10(0) to 9.8x10(2) ng m(-3) in the fragment size and from 1.0x10(1) to 4.7x10(4) ng m(-3) in the spore size range. Numbers of submicrometer-sized particles aerosolized from 6-month old cultures were always significantly higher that those from 1-month old (P<0.001). This can be attributed to increased dryness on the surface of material samples and an increase in fungal biomass over time. The average fragment to spore ratios both in particle numbers and (1-->3)-beta-D-glucan mass were higher for S. chartarum than for A. versicolor. The results indicate that long-term mold damage in buildings may lead to increased contribution of fragments to the total mold exposure. Therefore, the health impact of these particles may be even greater than that of spores, considering the strong association between numbers of fine particles and adverse health effects reported in other studies. Furthermore, the contribution of fragments may vary between species and appears to be higher for S. chartarum than for A. versicolor.

Aerosolization of particulate (1-->3)-beta-D-glucan from moldy materials

Mold-damaged building materials may contain biologically active agents, such as (1-->3)-beta-D-glucan, allergens, and mycotoxins, which have been associated with adverse health effects. The release of these components from contaminated surfaces into the air is not well understood. The purpose of this study was to characterize the release of particulate (1-->3)-beta-D-glucan from the surface of artificially mold-contaminated materials. Aspergillus versicolor and Stachybotrys chartarum were grown on malt extract agar (MEA), white ceiling tiles, and a wall-papered gypsum board for 1 and 6 months. The (1-->3)-beta-D-glucan on the surfaces of moldy materials and in air samples collected from these materials was analyzed by the Limulus amebocyte lysate assay. The aerosolization ratio was defined as the amount of (1-->3)-beta-D-glucan in the air divided by the amount on the surface. The results showed that the aerosolization of particulate (1-->3)-beta-D-glucan was influenced mainly by the type of material and the fungal species. For A. versicolor, the aerosolization ratios of particulate (1-->3)-beta-D-glucan released from the three types of material were not significantly different. However, the ratios for S. chartarum released from ceiling tiles and gypsum board were significantly higher than the ratios for this organism released from MEA (P < 0.001) and were comparable to those for A. versicolor. These findings indicate that the use of MEA in aerosolization experiments is likely to underestimate the release of S. chartarum particles from building materials. These results provide important background information for design of future laboratory or animal experiments, as well as for interpretation of field measurement data.

Starch in plasterboard sustains Streptomyces californicus growth and bioactivity of spores

AIMS

The effects of plasterboard composition on Streptomyces californicus growth and bioactivity of spores were studied.

METHODS AND RESULTS

Streptomyces californicus was grown on 13 modified plasterboards under saturated humidity conditions. The total content of fatty acid methyl esters was used for quantifying S. californicus biomass, while the spore-induced cytotoxicity and production of nitric oxide (NO), tumour necrosis factor-alpha, and interleukine-6 (IL-6) in mouse macrophages was used to assess the bioactivity of spores. Removal of starch completely from the plasterboard or only from the core reduced significantly the biomass production and the biological activity of spores in comparison with reference board. The biocide added into the core or on the liner decreased the growth markedly and inhibited the sporulation totally. The biomass production correlated positively with the spore number, cytotoxicity, and production of NO and IL-6.

CONCLUSIONS

Streptomyces californicus grew under nutrient limitation on all studied plasterboards. The starch is the major factor enabling S. californicus to grow and to produce biologically active metabolites on plasterboard.

SIGNIFICANCE AND IMPACT OF THE STUDY

The composition of building material has an impact on microbial growth and bioactivity of spores which may be involved in complex mechanisms leading to respiratory symptoms in the occupants in moisture damaged buildings.