Spin-dependent exciton formation in pi-conjugated compounds

Forthcoming hyperfluorescence display technology: relevant factors to achieve high-performance stable organic light emitting diodes

Over the decade, there have been developments in purely organic thermally activated delayed fluorescent (TADF) materials for organic light-emitting diodes (OLEDs). However, achieving narrow full width at half maximum (FWHM) and high external quantum efficiency (EQE) is crucial for real display industries. To overcome these hurdles, hyperfluorescence (HF) technology was proposed for next-generation OLEDs. In this technology, the TADF material was considered a sensitizing host, the so-called TADF sensitized host (TSH), for use of triplet excitons via the reverse intersystem crossing (RISC) pathway. Since most of the TADF materials show bipolar characteristics, electrically generated singlet and triplet exciton energies can be transported to the final fluorescent emitter (FE) through Förster resonance energy transfer (FRET) rather than Dexter energy transfer (DET). This mechanism is possible from the S₁ state of the TSH to the S₁ state of the final fluorescent dopant (FD) as a long-range energy transfer. Considering this, some reports are available based on hyperfluorescence OLEDs, but the detailed analysis for highly efficient and stable devices for commercialization was unclear. So herein, we reviewed the relevant factors based on recent advancements to build a highly efficient and stable hyperfluorescence system. The factors include an energy transfer mechanism based on spectral overlapping, TSH requirements, electroluminescence study based on exciplex and polarity system, shielding effect, DET suppression, and FD orientation. Furthermore, the outlook and future positives with new directions were discussed to build high-performance OLEDs.

High-efficiency stretchable light-emitting polymers from thermally activated delayed fluorescence

Stretchable light-emitting materials are the key components for realizing skin-like displays and optical biostimulation. All the stretchable emitters reported to date, to the best of our knowledge, have been based on electroluminescent polymers that only harness singlet excitons, limiting their theoretical quantum yield to 25%. Here we present a design concept for imparting stretchability onto electroluminescent polymers that can harness all the excitons through thermally activated delayed fluorescence, thereby reaching a near-unity theoretical quantum yield. We show that our design strategy of inserting flexible, linear units into a polymer backbone can substantially increase the mechanical stretchability without affecting the underlying electroluminescent processes. As a result, our synthesized polymer achieves a stretchability of 125%, with an external quantum efficiency of 10%. Furthermore, we demonstrate a fully stretchable organic light-emitting diode, confirming that the proposed stretchable thermally activated delayed fluorescence polymers provide a path towards simultaneously achieving desirable electroluminescent and mechanical characteristics, including high efficiency, brightness, switching speed and stretchability as well as low driving voltage.

Utilization of a Pt(ii) di-yne chromophore incorporating a 2,2'-bipyridine-5,5'-diyl spacer as a chelate to synthesize a green and red emitting d-f-d heterotrinuclear complex

A new heterotrinuclear (d-f-d) complex [Eu(btfa)₃1c] (btfa = 4,4,4-trifluoro-1-phenyl-1,3-butanedione and 1c = [(Ph)(Et₃P)₂Pt-C[triple bond, length as m-dash]C-R-C[triple bond, length as m-dash]C-Pt(Et₃P)₂(Ph)] (R = 2,2'-bipyridine-5,5'-diyl) has been synthesized by utilizing the N,N-donor sites of the organometallic chromophore. The complex was characterized by analytical and spectroscopic methods. Photophysical properties of the complex were analysed in detail using both steady-state and time-resolved emission and excitation spectroscopy. The optical absorption spectrum of the complex is dominated by the spin allowed π-π* transitions of the btfa and 1c units in the UV-visible region (200-418 nm) and thus is excitable over a wide range of wavelengths across the UV into the visible region of the electromagnetic spectrum. The complex displays typical red Eu(iii) emission when excited at 345 nm. However, it also shows green emission when excited at 464 nm and, thus could be an interesting candidate for full colour display applications. The change in the colour could be a result of the high value of the energy back-transfer rate (6.73 × 10⁵ s^-1) from the triplet state of the organometallic chromophore to the ⁵D₁ state of Eu(iii). Judd-Ofelt (J-O) intensity parameters (Ω₂ and Ω₄), radiative (A_R), non-radiative (A_R) decay rates and intrinsic quantum yield (Q) have been calculated.

Recent progress in hot exciton materials for organic light-emitting diodes

According to Kasha's rule, high-lying excited states usually have little effect on fluorescence. However, in some molecular systems, the high-lying excited states partly or even mainly contribute to the photophysical properties, especially in the process of harvesting triplet excitons in organic electroluminescent devices. In the current review, we focus on a type of organic light-emitting diode (OLED) materials called "hot exciton" materials, which can effectively harness the non-radiative triplet excitons via reverse intersystem crossing (RISC) from high-lying triplet states to singlet states (T_n→ S_m; n≥ 2, m≥ 1). Since Ma and Yang proposed the hot exciton mechanism for OLED material design in 2012, there have been many reports aiming at the design and synthesis of novel hot exciton luminogens. Herein, we present a comprehensive review of the recent progress in hot exciton materials. The developments of the hot exciton mechanism are reviewed, the fundamental principles regarding molecular design are discussed, and representative reported hot exciton luminogens are summarized and analyzed, along with their structure-property relationships and OLED applications.

Understanding and Designing Thermally Activated Delayed Fluorescence Emitters: Beyond the Energy Gap Approximation

In this article recent progress in the development of molecules exhibiting Thermally Activated Delayed Fluorescence (TADF) is discussed with a particular focus upon their application as emitters in highly efficient organic light emitting diodes (OLEDs). The key aspects controlling the desirable functional properties, e. g. fast intersystem crossing, high radiative rate and unity quantum yield, are introduced with a particular focus upon the competition between the key requirements needed to achieve high performance OLEDs. The design rules required for organic and metal organic materials are discussed, and the correlation between them outlined. Recent progress towards understanding the influence of the interaction between a molecule and its environment are explained as is the role of the mechanism for excited state formation in OLEDs. Finally, all of these aspects are combined to discuss the ability to implement high level design rules for achieving higher quality materials for commercial applications. This article highlights the significant progress that has been made in recent years, but also outlines the significant challenges which persist to achieve a full understanding of the TADF mechanism and improve the stability and performance of these materials.

Double addition of phenylacetylene onto the mixed bridge phosphinito-phosphanido Pt(i) complex [(PHCy2)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(PHCy2)](Pt-Pt)

The reaction of the dinuclear phosphinito bridged complex [(PHCy2)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(PHCy2)](Pt-Pt) (1) with phenylacetylene affords the η1-alkenyl-μ,η1:η2-alkynyl complex [(η1-trans-(Ph)HC[double bond, length as m-dash]CH)(PHCy2)Pt(μ-PCy2)(μ,η1:η2-PhC[triple bond, length as m-dash]C)Pt{κP-P(O)Cy2}(PHCy2)] (4) displaying a σ-bonded 2-phenylethenyl ligand and an alkynyl (μ-κCα:η2) bridge between the platinum atoms. Complex 4 was shown to form in two steps: initially, the attack of the first molecule of phenylacetylene gives the σ-acetylide complex [(PHCy2)(η1-PhC[triple bond, length as m-dash]C)Pt1(μ-PCy2)Pt2(PHCy2){κP-P(OH)Cy2}](Pt-Pt) (5) featuring an intramolecular π-type hydrogen bond between the POH and the C[triple bond, length as m-dash]C triple bond; fast reaction of 5 with a second molecule of phenylacetylene results in the oxidative addition of the terminal C-H bond of the second alkyne to Pt1 that, after rearrangements, leads to 4. When left in solution for two weeks, complex 4 spontaneously isomerizes completely to [(PHCy2)(η1-trans-(Ph)HC[double bond, length as m-dash]CH)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(η1-PhC[triple bond, length as m-dash]C)(PHCy2)] (7) displaying a 2-phenylethenyl ligand and a phenylethynyl group both σ-bonded to the metal. Density functional calculations at the B3LYP/LACV3P++**//DFT/LACVP* level were carried out to study the thermodynamics of the formation of all considered complexes and to trace the mechanism of formation of the observed products.

Rational design of near-infrared platinum(ii)-acetylide conjugated polymers for photoacoustic imaging-guided synergistic phototherapy under 808 nm irradiation

We have developed a novel near-infrared Pt-acetylide conjugated polymer CP3 with highly efficient photoconversion behaviors for synergistic cancer phototherapy.

Altering the optoelectronic properties of boron difluoride formazanate dyes via conjugation with platinum(ii)-acetylides

The absorption, emission, and electrochemical properties of conjugates of boron difluoride formazanate dyes and Pt(ii)-acetylides are systematically studied.

Pyridine-Carbonitrile-Carbazole-Based Delayed Fluorescence Materials with Highly Congested Structures and Excellent OLED Performance

Three pyridine-carbonitrile-carbazole-based thermally activated delayed fluorescence (TADF) materials with highly sterically congested structures have been synthesized. The donor-acceptor-type TADF emitters (26-, 246-, and 35tCzPPC) consist of a 2,6-diphenylpyridine-3,5-dicarbonitrile core (PPC) as the acceptor and a di( t-butyl)carbazole-substituted phenyl group attached to C4 of the PC core as the donor. The molecules show a unique structure containing two consecutive large twisted angles along the donor and acceptor groups. The structure leads to a nearly complete space separation of the highest occupied molecular orbital and lowest unoccupied molecular orbital, a small Δ E_ST value, and excellent TADF property. Moreover, the 26- and 246tCzPPC dopants favor a horizontal alignment enhancing the light outcoupling of the device. In contrast, 35tCzPPC favors a perpendicular alignment reducing the light outcoupling efficiency of the device. The 246tCzPPC-based devices show external quantum efficiency as high as 29.6% because of excellent TADF property, very high photoluminescence quantum yield, and high Θ value in the thin films. The device performance is the best among the pyridine-carbonitrile-based TADF emitters.

Photophysical and Electroluminescence Characteristics of Polyfluorene Derivatives with Triphenylamine

In this work, polymers of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-triphenylamine] with side chains containing: pyrene (C1), diphenyl (C2), naphthalene (C3), and isopropyl (C6) structures were synthesized via a Suzuki coupling reaction. The structures were verified using NMR and cyclic voltammetry measurements provide the HOMO and LUMO of the polymers. The polymer with pyrene (C1) and naphthalene (C3) produced photoluminescence in the green while the polymer with the side chain containing diphenyl (C2) and isopropyl (C6) produce dual emission peaks of blue-green photoluminescence (PL). In order to examine the electroluminescence properties of the polymers, the solutions were spin-coated onto patterned ITO anode, dried, and subsequently coated with an Al cathode layer to form pristine single layer polymer LEDs. The results are compared to a standard PFO sample. The electroluminescence spectra resemble the PL spectra for C1 and C3. The devices of C2, C3, and C6 exhibit voltage-dependent EL. An additional red emission peak was detected for C2 and C6, resulting in spectra with peaks at 435 nm, 490 nm, and 625 nm. The effects of the side chains on the spectral characteristics of the polymer are discussed.

Rise of Conjugated Poly-ynes and Poly(Metalla-ynes): From Design Through Synthesis to Structure-Property Relationships and Applications

Conjugated poly-ynes and poly(metalla-ynes) constitute an important class of new materials with potential application in various domains of science. The key factors responsible for the diverse usage of these materials is their intriguing and tunable chemical and photophysical properties. This review highlights fascinating advances made in the field of conjugated organic poly-ynes and poly(metalla-ynes) incorporating group 4-11 metals. This includes several important aspects of conjugated poly-ynes viz. synthetic protocols, bonding, electronic structure, nature of luminescence, structure-property relationships, diverse applications, and concluding remarks. Furthermore, we delineated the future directions and challenges in this particular area of research.

Potential thermally activated delayed fluorescence properties of a series of 2,3-dicyanopyrazine based compounds

2,3-Dicyanopyrazine based acceptor was combined with a series of well studied donors to obtain donor-acceptor type potential thermally activated delayed fluorescence emitters. Their structural and electronic properties were computed theoretically at the level of density functional theory and time dependent density functional theory with the application of two different hybrid functionals and various basis sets. Almost all of the designed structures were computed to have the potential of being TADF compounds since they possess very narrow singlet-triplet gaps. Indeed, acridine-pyrazine (9) derivative was calculated to be the best candidate for the purpose among them.

New iridium-containing conjugated polymers for polymer solar cell applications

The highest value of power conversion efficiency is 1.74% for the P3 based polymer.

Mechanical Activation of Platinum-Acetylide Complex for Olefin Hydrosilylation

Harnessing mechanical forces to activate latent catalysts has emerged as a novel approach to control the catalytic reactions in organic syntheses and polymerization processes. However, using polymer mechanochemistry to activate platinum-based catalysts, a class of important organometallic catalysts in industry, has not been demonstrated so far. Here we show that the platinum-acetylide complex is mechanoresponsive and can be incorporated into a polymer backbone to form a new mechanophore. The mechanically induced chain scission was demonstrated to be able to release catalytically active platinum species which could catalyze the olefin hydrosilylation process. Various control experiments were conducted to confirm that the chain scission and catalytic reaction were originated from the ultrasound-induced dissociation of platinum-acetylide complex. This work further exemplifies the utilization of organometallic complexes in design and synthesis of latent catalysts for mechanocatalysis and development of self-healing materials based on silicone polymers.

Functional Organometallic Poly(arylene ethynylene)s: From Synthesis to Applications

This review focuses on the recent development in the rigid-rod metallopolymers of late transition metals based on triple-bond building blocks. The synthesis, structure-property relationships and potential applications of organometallic poly(arylene ethynylene)s will be discussed in detail. These functional metal-based polymers can exhibit intriguing optical, electronic and magnetic properties. Considerable focus is placed on the design strategies towards tuning the optical bandgap and emission color (spanning almost the whole visible spectrum) of this class of metallopolymers, and the investigation of their use as active materials for light/electrical energy conversion and energy and information storage. The ongoing scientific challenges and future prospects of this research field are also highlighted.

Delocalisation of photoexcited triplet states probed by transient EPR and hyperfine spectroscopy

Photoexcited triplet states play a crucial role in photochemical mechanisms: long known to be of paramount importance in the study of photosynthetic reaction centres, they have more recently also been shown to play a major role in a number of applications in the field of molecular electronics. Their characterisation is crucial for an improved understanding of these processes with a particular focus on the determination of the spatial distribution of the triplet state wavefunction providing information on charge and energy transfer efficiencies. Currently, active research in this field is mostly focussed on the investigation of materials for organic photovoltaics (OPVs) and organic light emitting diodes (OLEDs). As the properties of triplet states and their spatial extent are known to have a major impact on device performance, a detailed understanding of the factors governing triplet state delocalisation is at the basis of the further development and improvement of these devices. Electron Paramagnetic Resonance (EPR) has proven a valuable tool in the study of triplet state properties and both experimental methods as well as data analysis and interpretation techniques have continuously improved over the last few decades. In this review, we discuss the theoretical and practical aspects of the investigation of triplet states and triplet state delocalisation by transient continuous wave and pulse EPR and highlight the advantages and limitations of the presently available techniques and the current trends in the field. Application of EPR in the study of triplet state delocalisation is illustrated on the example of linear multi-porphyrin chains designed as molecular wires.

Singlet Exciton Fraction in Electroluminescence from Conjugated Polymer

The efficiency of electrofluorescent polymer light-emitting diodes is determined by singlet exciton fraction (χ_S) formation and its value still remains controversial. In this work, χ_S in spiropolyfluorene (SPF) is determined by analyzing transient emission of phosphor-dopant probe. The χ_S is found to range from 50% to 76%, depending on applied voltage. Higher applied voltage gives larger χ_S. Besides, more rapid increment in χ_S with applied voltage is observed in the higher-molecular-weight polymer. The voltage or molecular weight dependence of χ_S suggests the probability of singlet exciton (SE) generation through triplet-triplet annihilation (TTA) is enhanced due to higher triplet exciton (TE) concentration at higher applied voltage or accommodation of more TEs in a polymer chain with high molecular weight, thereby increasing probability of TTA. At lower applied voltage, χ_S is contributed by charge recombination. Its value (χ_S ~50%) higher than the statistical limit 25% is in agreement with efficient interconversion between triplet and singlet polaron pairs (PP) and with larger formation rate of SE relative to that of TE.

Efficient Generation of Long-Lived Triplet Excitons in 2D Hybrid Perovskite

Triplet excitons form in quasi-2D hybrid inorganic-organic perovskites and diffuse over 100 nm before radiating with >11% photoluminescence quantum efficiency (PLQE) at low temperatures.

Inverse spin Hall effect from pulsed spin current in organic semiconductors with tunable spin-orbit coupling

Exploration of spin currents in organic semiconductors (OSECs) induced by resonant microwave absorption in ferromagnetic substrates is appealing for potential spintronics applications. Owing to the inherently weak spin-orbit coupling (SOC) of OSECs, their inverse spin Hall effect (ISHE) response is very subtle; limited by the microwave power applicable under continuous-wave (cw) excitation. Here we introduce a novel approach for generating significant ISHE signals in OSECs using pulsed ferromagnetic resonance, where the ISHE is two to three orders of magnitude larger compared to cw excitation. This strong ISHE enables us to investigate a variety of OSECs ranging from π-conjugated polymers with strong SOC that contain intrachain platinum atoms, to weak SOC polymers, to C60 films, where the SOC is predominantly caused by the curvature of the molecule's surface. The pulsed-ISHE technique offers a robust route for efficient injection and detection schemes of spin currents at room temperature, and paves the way for spin orbitronics in plastic materials.

Organic light-emitting diodes: theoretical understanding of highly efficient materials and development of computational methodology

Theoretical understanding of organic light-emitting diodes started from the quest to the nature of the primary excitation in organic molecular and polymeric materials. We found the electron correlation strength, bond-length alternation as well as the conjugation extent have strong influences on the orderings of the lowest lying excited states through the first application of density matrix renormalization group theory to quantum chemistry. The electro-injected free carriers (with spin 1/2) can form both singlet and triplet bound states. We found that the singlet exciton formation ratio can exceed the conventional 25% spin statistics limit. We proposed a vibration correlation function formalism to evaluate the excited-state decay rates, which is shown to not only give reasonable estimations for the quantum efficiency but also a quantitative account for the aggregation-induced emission (AIE). It is suggested to unravel the AIE mechanism through resonance Raman spectroscopy.

Color-Transformable Silicone Elastomers Prepared by Thiol-Ene Reaction with Potential Application in UV-LEDs

A series of high-efficiency, full-color fluorescent elastomers based on polysiloxane matrix prepared by an easy thiol-ene "click" reaction is reported here. It is found for the first time that the same elastomer can emit transformable colors by conveniently altering the excitation wavelength because of the effect of energy transfer and the "fluorescence switch" of lanthanide ions. A fluent change in emission colors can also be feasible and conveniently reproducible by varying the stoichiometric ratio of lanthanide ions and rhodamine-B in solution and in polymer elastomers. The obtained elastomers are further coated onto commercially available UV-LED cells from the solution medium followed by an in situ cross-linking step.

Creating a thermally activated delayed fluorescence channel in a single polymer system to enhance exciton utilization efficiency for bluish-green electroluminescence

A single polymer with TADF feature has been developed by the side-chain engineering strategy. Employing these copolymers as emitting layers results in a high exciton utilization efficiency of 63.7%.

Direct monitoring of bias-dependent variations in the exciton formation ratio of working organic light emitting diodes

In typical operation of organic light emitting diodes (OLEDs), excitons are assumed to generate with a ratio of 1:3 for singlet and triplet excitons, respectively, based on a simple spin statistics model. This assumption has been used in designing efficient OLEDs. Despite the larger generation ratio of triplet excitons, physical properties of fluorescent OLEDs are usually evaluated only through the electroluminescence (EL) intensity from singlets and the behaviors of triplets during the LED operation are virtually black-boxed, because the triplets are mostly non-emissive. Here, we employ transient spectroscopy combined with LED-operation for directly monitoring the non-emissive triplets of working OLEDs. The spectroscopic techniques are performed simultaneously with EL- and current measurements under various operation biases. The simultaneous measurements reveal that the relative formation ratio of singlet-to-triplet excitons dramatically changes with the magnitude of bias. The measurements also show that the generation efficiency of singlets scales with the bias, whereas that of triplets is nearly bias-independent. These features of the formation ratio and efficiency are compatibly explained by considering the yield of intersystem crossing and the energy separation of excitons from electron-hole pairs. The obtained findings via the spectroscopic measurements enable prediction of the formation pathways in OLEDs.

Pure white OLED based on an organic small molecule: 2,6-Di(1H-benzo[d]imidazol-2-yl)pyridine

2,6-Di(1H-benzo[d]imidazol-2-yl)pyridine (DBIP) was synthesized. The single-crystal structure of DBIP was resolved. DBIP-based OLED was fabricated. The electroluminescence for the device corresponds to a pure white emission. In addition, thermal stability, UV-vis, photoluminescence and electrochemical behaviors of DBIP were investigated as well.

Measuring spin relaxation with standard pulse sequences in the singlet-triplet basis

Pulsed electrically and optically-detected magnetic resonance are extremely sensitive to changes in the permutation symmetry of weakly-coupled spin pairs, and are well-suited for investigating devices with a small number of spins. However, the change in observable from conventional electron spin resonance modifies the results of standard inductively-detected pulse sequences which are routinely used to obtain phase coherence and lifetimes. Whilst these effects have been discussed for single-pulse experiments, their role in multi-pulse sequences is less clear. Here, we investigate this effect in Hahn echo and inversion-recovery sequences, and show a second set of narrower echoes are produced that distort measurement outcomes. We demonstrate that phase cycling is able to deconvolve the additional echo signals, allowing spin relaxation times to be reliably extracted.

Transient EPR Reveals Triplet State Delocalization in a Series of Cyclic and Linear π-Conjugated Porphyrin Oligomers

The photoexcited triplet states of a series of linear and cyclic butadiyne-linked porphyrin oligomers were investigated by transient Electron Paramagnetic Resonance (EPR) and Electron Nuclear DOuble Resonance (ENDOR). The spatial delocalization of the triplet state wave function in systems with different numbers of porphyrin units and different geometries was analyzed in terms of zero-field splitting parameters and proton hyperfine couplings. Even though no significant change in the zero-field splitting parameters (D and E) is observed for linear oligomers with two to six porphyrin units, the spin polarization of the transient EPR spectra is particularly sensitive to the number of porphyrin units, implying a change of the mechanism of intersystem crossing. Analysis of the proton hyperfine couplings in linear oligomers with more than two porphyrin units, in combination with density functional theory calculations, indicates that the spin density is localized mainly on two to three porphyrin units rather than being distributed evenly over the whole π-system. The sensitivity of the zero-field splitting parameters to changes in geometry was investigated by comparing free linear oligomers with oligomers bound to a hexapyridyl template. Significant changes in the zero-field splitting parameter D were observed, while the proton hyperfine couplings show no change in the extent of triplet state delocalization. The triplet state of the cyclic porphyrin hexamer has a much decreased zero-field splitting parameter D and much smaller proton hyperfine couplings with respect to the monomeric unit, indicating complete delocalization over six porphyrin units in this symmetric system. This surprising result provides the first evidence for extensive triplet state delocalization in an artificial supramolecular assembly of porphyrins.

Dual emission behavior of phenyleneethynylene gold(I) complexes dictated by intersystem crossing: a theoretical perspective

In commonly studied gold(I) complexes with oligo (o-, p-, or m-phenyleneethynylene) (PE) ligands, an intriguing photophysical behavior is dual emission composed of fluorescence from S1 and phosphorescence from T1 which is dictated by effective intersystem crossing (ISC) process. In order to explore the salient photodynamics of such oligo-PE gold(I) complexes effectively, we have deliberately chosen three model complexes, namely, Ph-C≡C-Au(PMe3) (1a') and Ph-C≡C-(1,m)C6H4-C≡C-Au(PMe3) (m=4, 2a'; m=3, 3a') in place of the real system. Firstly, electronic structure methods based on DFT and TD-DFT are utilized to perform optimization calculations for the ground- and lowest-lying excited states, respectively. Next, basic photophysical properties including absorption and emission spectra are investigated by TD-DFT under the optimized geometries. Besides, on the basis of the electronic spectra herein, we succeed in searching for surface intersections as the minima on the seam of singlet-triplet surface crossings (SCs) at the CASSCF level of theory. By integration of the results available, the process of delayed fluorescence of triplet-triplet annihilation (TTA) and phosphorescence was displayed in detail with SCs playing the lead in monitoring the ISC.

Highly efficient spin-conversion effect leading to energy up-converted electroluminescence in singlet fission photovoltaics

Free charge generation in donor-acceptor (D-A) based organic photovoltaic diodes (OPV) progresses through formation of charge-transfer (CT) and charge-separated (CS) states and excitation decay to the triplet level is considered as a terminal loss. On the other hand a direct excitation decay to the triplet state is beneficial for multiexciton harvesting in singlet fission photovoltaics (SF-PV) and the formation of CT-state is considered as a limiting factor for multiple triplet harvesting. These two extremes when present in a D-A system are expected to provide important insights into the mechanism of free charge generation and spin-character of bimolecular recombination in OPVs. Herein, we present the complete cycle of events linked to spin conversion in the model OPV system of rubrene/C₆₀. By tracking the spectral evolution of photocurrent generation at short-circuit and close to open-circuit conditions we are able to capture spectral changes to photocurrent that reveal the triplet character of CT-state. Furthermore, we unveil an energy up-conversion effect that sets in as a consequence of triplet population build-up where triplet-triplet annihilation (TTA) process effectively regenerates the singlet excitation. This detailed balance is shown to enable a rare event of photon emission just above the open-circuit voltage (V_OC) in OPVs.

Synthesis and photophysical properties of platinum-acetylide copolymers with thiophene, selenophene and tellurophene

A series of platinum-acetylide copolymers with thiophene, selenophene, and tellurophene have been synthesized and studied.

Ultrafast intersystem-crossing in platinum containing π-conjugated polymers with tunable spin-orbit coupling

The development of efficient organic light-emitting diodes (OLED) and organic photovoltaic cells requires control over the dynamics of spin sensitive excitations. Embedding heavy metal atoms in π-conjugated polymer chains enhances the spin-orbit coupling (SOC), and thus facilitates intersystem crossing (ISC) from the singlet to triplet manifolds. Here we use various nonlinear optical spectroscopies such as two-photon absorption and electroabsorption in conjunction with electronic structure calculations, for studying the energies, emission bands and ultrafast dynamics of spin photoexcitations in two newly synthesized π-conjugated polymers that contain intrachain platinum (Pt) atoms separated by one (Pt-1) or three (Pt-3) organic spacer units. The controllable SOC in these polymers leads to a record ISC time of <~1 ps in Pt-1 and ~6 ps in Pt-3. The tunable ultrafast ISC rate modulates the intensity ratio of the phosphorescence and fluorescence emission bands, with potential applications for white OLEDs.

Photophysical properties of trans-platinum acetylide complexes featuring N-heterocyclic carbene ligands

Platinum acetylide complexes featuring NHC-carbene ligands show enhanced photophysical properties relative to complexes with phosphine ligands.