Electrically erodible polymer gel for controlled release of drugs

Pathophysiology-Driven Approaches for Overcoming Nanomedicine Resistance in Pancreatic Cancer

Tumor heterogeneity poses a significant challenge in cancer therapy. To address this, we analyze pharmacotherapeutic challenges by categorizing them into static and dynamic barriers, reframing these challenges to improve drug delivery, efficacy, and the development of controlled-release nanomedicines (CRNMs). This pathophysiology-driven approach facilitates the design of novel therapeutics tailored to overcome obstacles in pancreatic ductal adenocarcinoma (PDAC) using nanotechnology. Advanced biomaterials in nanodrug delivery systems offer innovative solutions by combining controlled release, stimuli sensitivity, and smart design strategies. CRNMs are engineered to modulate spatiotemporal signaling and control drug release in PDAC, where resistance to conventional therapies is particularly high. This review explores pharmacokinetic considerations for nanomedicine design, RNA interference (RNAi) for stromal modulation, and the development of targeted nanomedicine strategies. Additionally, we highlight the limitations of current animal models in capturing the complexities of PDAC and discuss notable clinical failures, such as PEGylated hyaluronidase (Phase III HALO 109-301 trial) and evofosfamide (TH-302) with gemcitabine (MAESTRO trial), underscoring the need for improved models and treatment strategies. By targeting pathways like Notch and Hedgehog and incorporating stimuli-sensitive and pathway-modulating agents, CRNMs offer a promising avenue to enhance drug penetration and efficacy, reshaping the paradigm of pancreatic cancer treatment.

Multivalent Salt-Induced Self-Assembly of Amphiphilic Polyelectrolytes of Different Charge Fractions: A Coarse-Grained Molecular Dynamics Simulation Study

Amphiphilic polymers with both hydrophobic and hydrophilic blocks are of great interest for their potential applications in drug delivery. Their self-assembly behavior in response to environmental factors like ion charge and multivalent salt concentration has been the subject of recent investigation. Our study utilizes coarse-grained molecular dynamics simulations to investigate the aggregation behavior of amphiphilic copolymers upon introducing tetravalent salt at varying charge fractions. We identify a critical concentration, Cs*, where the aggregation number reaches its maximum for each charge fraction, followed by a subsequent decrease at the excessive salt regime. This study reveals distinct morphological transitions in response to increasing salt concentration and decreasing charged fractions, namely, (i) stable dispersed micelles, (ii) a singular micelle comprising all copolymer chains, and (iii) redispersed micelles, particularly evident at lower charged fractions. Our study highlights the significant influence of tetravalent salt and charge fractions of polyelectrolyte chains on the self-assembly behavior of polyelectrolyte copolymers.

Development and Characterization of CO2-Responsive Intelligent Polymer Sealant

In this study, we present an innovative intelligent polymer sealant designed to mitigate CO2 leakage during underground geological storage (CCUS). This sealant is formulated by cross-linking CO2-responsive polymers, specifically acrylamide (AM) and N-[3-(dimethylamino) propyl] methacrylamide (DMAPMA), with polyethylenimine (PEI) serving as the cross-linking agent. The polymer sealant's characteristics were systematically investigated, varying the CO2-responsive polymer content (1.5 wt %) and PEI content (0.1-0.6 wt %). A comprehensive analysis encompassing the rheological properties, thermal behavior, conductivity, and microstructures was conducted. Experimental results indicate that the polymer sealant exhibits excellent injectability, rapid response kinetics, thermal stability, and robust mechanical strength. Upon encountering CO2, the polymer system undergoes a transition from sol to gel state, forming a surface-smooth, uniformly porous three-dimensional (3D) network skeleton structure. Remarkably, the gel's modulus remains relatively unaffected by the shear frequency. Core fluid displacement experiments demonstrated a substantial sealing efficiency of 73.6% for CO2 and an impressive subsequent injection water sealing rate of 96.2%, underscoring its superior sealing and migration performance. In conclusion, the proposed CO2-responsive gel sealant exhibits an exceptional potential for successful utilization in CCUS operations. This advancement introduces a novel avenue to enhance the effectiveness of CO2-responsive gel sealants, thereby contributing to the advancement of CO2 leakage mitigation strategies in geological storage scenarios.

A Multiple-Stimuli-Responsive Amphiphilic Copolymer for Antifouling and Antibacterial Functionality via a “Resistance–Kill–Release” Mechanism

In recent years, polymers with stimuli-responsive properties have been increasingly reported on due to their diverse applications. However, most of the studies have only focused on the performance of polymers under specific scenarios. The laws of changes in the properties in response to various external stimuli have been less systematically and quantitatively studied. In this paper, we prepared an amphiphilic polymer (PadaMX and PAdaM3QA−X) with temperature-, pH-, ion-, and β-cyclodextrin (β-CD)-responsive properties. According to the cloud point tested by the UV-Vis method, the lower critical soluble temperature (LCST) of PAdaM3QA−10% was more sensitive to a change in pH and less sensitive to a change in ions compared with PadaM3 due to quaternized side chains with a stronger intramolecular mutual repulsion. We then fabricated the coatings with responsive properties by immobilizing the adamantyl groups on β-CD-modified surfaces. The hydrophilicity of the coatings was improved after quaternization, as proven by the water contact angle (WCA) measurement. The antifouling and antibacterial performance was further evaluated via the fluorescence intensity of bovine serum albumin (BSA) adsorbed on the surfaces and the spread plate method. A 78.4% BSA desorption rate and a 96.8% sterilization rate were achieved by the PAdaM3QA−10% coating. In summary, this work prepared a multiple-stimuli-responsive amphiphilic copolymer for antifouling and antibacterial functionality via a “resistance–kill–release” mechanism.

Recent advances in remotely controlled pulsatile drug delivery systems

Pharmaceutical technology is drastically developing to enhance the efficacy and safety of drug therapy. Pulsatile delivery systems, in turn, gained attraction for their ability to deliver the right drug amount to the right body site, at the right time which is advantageous over conventional dosage forms. Their use is associated with increased patient compliance and allows on-demand drug delivery as well as customizable therapy. Recent technologies have been implemented to further develop pulsatile delivery systems for more precise determination of the dosage timing and duration as well as the location of drug release. Great interests are directed towards externally regulated pulsatile release systems which will be the focus of this review. The recent advances will be highlighted in remotely controlled delivery systems. This includes electro responsive, light-responsive, ultrasound responsive, and magnetically induced pulsatile systems as well as wirelessly controlled implantable systems. The current status of these technologies will be discussed as well as the recent investigations and future applications.

Cagearenes: synthesis, characterization, and application for programmed vapor release

Here, we announce the establishment of a new family of organic molecular cages, named cagearenes, by taking advantage of a versatile strategy. These cagearenes were prepared via the Friedel–Crafts reaction by condensing two equivalents of a precursor bearing three 1,4-dimethoxybenzene groups and three equivalents of formaldehyde. Two cages, namely cagearene-1 and cagearene-2, are obtained and well characterized. The cagearene-1 solid exhibits the ability to adsorb benzene vapour from an equimolar benzene/cyclohexane mixture with a purity of 91.1%. Then, the adsorbed benzene molecules can be released from the cage at a relatively lower temperature, namely 70 °C, as a consequence of which, cyclohexane with a high purity was left within the cage solid. Heating the cage solid further at 130 °C led to the production of cyclohexane with a purity up to 98.7%. As inferred from the single crystal structures and theoretical calculations, the ability of the cage in programmed release of benzene and cyclohexane results from the different binding modes of these two guests.

Two organic cages, cagearene-1 and cagearene-2, are prepared. The cagearene-1 solid selectively absorbs benzene vapor from a benzene/cyclohexane mixture and is used to achieve temperature-controlled programmed vapor release.

In Situ Synthesis of Magnetic Poly(DMAEAB-co-NIPAm)@Fe3O4 Composite Hydrogel for Removal of Dye from Water

Water pollution by toxic substances, such as dye molecules, remains a major environmental problem that needs to be solved. In the present work, the magnetic composite hydrogel based on the poly(2-(methacryloyloxy)-N-(2-hydroxyethyl)-N,N-dimethylethan-1-aminium bromide-co-N-isopropylacrylamide) copolymer with incorporated Fe3O4 particles ((poly(DMAEAB-co-NIPAm)@Fe3O4)) was prepared by an in situ synthesis technique for the efficient removal of dye molecules from water. The successfully synthesized magnetic hydrogel was characterized by FTIR, XRD, TGA, and TEM. The removal efficiency of the anionic dye bromophenol blue (BPB) and the cationic dye rhodamine B (RDM) by the prepared hydrogel adsorbents was evaluated. Various adsorption parameters, including the concentration of adsorbents and adsorption time, were also investigated. The results showed that the synthesized magnetic hydrogel had excellent BPB removal performance compared to the removal of RDM. The optimum adsorbent concentration for 0.5 mM BPB solution was approximately 0.5 g/L, and the removal efficiency was more than 99%. The kinetics data of BPB removal fitted well into the pseudo-2nd-order model, indicating that BPB dye adsorption involves chemical adsorption and physical adsorption. In addition, recycling studies were conducted to examine the reusability of the magnetic hydrogel for BPB removal for up to five cycles and the hydrogel could be reused without losing its high removal efficiency. The magnetic hydrogel poly(DMAEAB-co-NIPAm)@Fe3O4 with high removal efficiency, good selectivity, and reusability shows great potential for the removal of anionic dyes in wastewater treatment.

Electro-Mechanochemical Gating of a Metal-Phenolic Nanocage for Controlled Guest-Release Self-Powered Patches and Injectable Gels

Recent advances have led to the development of intelligent drug-delivery systems such as microchips, micropumps, and soft devices with sensors; however, the facile preparation of transdermal and implantable systems modulable to various stimuli remains elusive. In addition, the use of a battery limits their wearable and implantable applications. Therefore, to overcome these disadvantages, we herein suggest a facile strategy to prepare electro-mechanochemically responsive soft gel composites with molecular gatekeeper-based nanocontainers. We found that a metal-phenolic coordination network can act as an efficient self-healable and adaptive gatekeeper in response to electrical and mechanical stimuli owing to the reversible dynamic bonds and adhesiveness to the silica surface. The porous channels of mesoporous silica nanoparticles are filled with guest molecules, and the exterior is wrapped with metal-tannic acid (TA) networks. Owing to the robustness of metal-phenolic network, the guest molecules are efficiently entrapped in the channels but released by electrical and ultrasound input. Voltage-dependent changes in the guest release rate provide control over the dosage on demand. The combination of hydrogel matrixes with the responsive nanocapsules enables the construction of a series of adaptive gel composites capable of successive guest release in response to electrical, ultrasound, electromechanical, and triboelectric stimuli. The Korsmeyer-Peppas model revealed that the release mechanism is non-Fickian, which indicates the presence of boundaries around the guest-loading channels (n = 0.739, R² = 0.9574 when 2 V is applied). This study realized efficient platforms for active-type drug-delivery applications based on transdermal patches and implantable gels with remotely controllable release characteristics.

Memory effects in polymer brushes showing co-nonsolvency effects

Densely packed polymer chains grafted to a substrate, especially polymer brushes, have been studied intensively. Of special interest are systems that react to changes in external conditions or"remember" previous conditions. With this focus, we explore the properties of PNiPAAm brushes and relate published work to own results. The co-nonsolvency effect leads to a collapse of a PNiPAAm brush for a certain mixing ratio of ethanol in water. This also influences the wetting behavior of PNiPAAm brushes. We show that through prewetting of a brush with different liquids (water and ethanol), the contact angle of subsequent water drops changes significantly. To explain this change, the swelling of the brush was investigated with spectroscopic ellipsometry and the orientation of the molecules at the surface with sum-frequency generation (SFG). Only little change in swelling was found. The SFG measurements reveal in the ethanol prewetted case a well ordered hydrophobic methyl layer at the interface, which is consistent with the contact angle measurement.

Activation of the Catalytic Activity of Thrombin for Fibrin Formation by Ultrasound

The regulation of enzyme activity is a method to control biological function. We report two systems enabling the ultrasound-induced activation of thrombin, which is vital for secondary hemostasis. First, we designed polyaptamers, which can specifically bind to thrombin, inhibiting its catalytic activity. With ultrasound generating inertial cavitation and therapeutic medical focused ultrasound, the interactions between polyaptamer and enzyme are cleaved, restoring the activity to catalyze the conversion of fibrinogen into fibrin. Second, we used split aptamers conjugated to the surface of gold nanoparticles (AuNPs). In the presence of thrombin, these assemble into an aptamer tertiary structure, induce AuNP aggregation, and deactivate the enzyme. By ultrasonication, the AuNP aggregates reversibly disassemble releasing and activating the enzyme. We envision that this approach will be a blueprint to control the function of other proteins by mechanical stimuli in the sonogenetics field.

Stimuli-responsive polymer-based systems for diagnostic applications

Stimuli-responsive polymers exhibit properties that make them ideal candidates for biosensing and molecular diagnostics. Through rational design of polymer composition combined with new polymer functionalization and synthetic strategies, polymers with myriad responsivities, e.g., responses to temperature, pH, biomolecules, CO2, light, and electricity can be achieved. When these polymers are specifically designed to respond to biomarkers, stimuli-responsive devices/probes, capable of recognizing and transducing analyte signals, can be used to diagnose and treat disease. In this review, we highlight recent state-of-the-art examples of stimuli-responsive polymer-based systems for biosensing and bioimaging.

Spatiotemporal delivery of bioactive molecules for wound healing using stimuli-responsive biomaterials

Wound repair is a fascinatingly complex process, with overlapping events in both space and time needed to pave a pathway to successful healing. This additional complexity presents challenges when developing methods for the controlled delivery of therapeutics for wound repair and tissue engineering. Unlike more traditional applications, where biomaterial-based depots increase drug solubility and stability in vivo, enhance circulation times, and improve retention in the target tissue, when aiming to modulate wound healing, there is a desire to enable localised, spatiotemporal control of multiple therapeutics. Furthermore, many therapeutics of interest in the context of wound repair are sensitive biologics (e.g. growth factors), which present unique challenges when designing biomaterial-based delivery systems. Here, we review the diverse approaches taken by the biomaterials community for creating stimuli-responsive materials that are beginning to enable spatiotemporal control over the delivery of therapeutics for applications in tissue engineering and regenerative medicine.

Hydrogel Nanoparticle as a Functional Coating Layer in Biosensing, Tissue Engineering, and Drug Delivery

The development of functional coating materials has resulted in many breakthroughs in the discovery of energy, environmental, and biomedical applications. Responsive polymeric hydrogels are an example of smart coating materials due to their stimuli-responsive characteristics upon changes in their local environment. This review focuses on the introduction of hydrogel nanoparticles and their applications in functional layers as responsive coating materials. Hydrogels are explained by the composition of cross-links and monomers used for preparation. In particular, an important class of responsive hydrogels, that is, nanosized hydrogel particles (nanogels), are described for thee synthesis, modification, and application in assembly of functional coating layers. Finally, nanogel functional layers for biological applications will be discussed with recent advances in biosensing, tissue engineering, and drug delivery.

Microgel-Based Stretchable Reservoir Devices for Elongation Enhanced Small Molecule Release Rate

Stretchable poly(N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-10% AAc) microgel-based reservoir devices were fabricated and used to control the release rate of the small molecule model drug tris(4-(dimethylamino)phenyl)methylium chloride (crystal violet, CV) to solution by varying the Au layer thickness coating the microgels and device elongation. Specifically, we showed that CV could be loaded into the microgel layer of the devices via electrostatic interactions at pH 6.5, and the release could be triggered upon exposure to a pH 3.0 solution, which breaks the microgel-CV electrostatic interactions. We demonstrated that the rate of release could be increased by decreasing the Au layer thickness coating microgels and by stretching, that is, thin Au and high elongation promoted the relatively fast release of CV from the device. We found that the Au overlayer thickness (and porosity) dominated the observed release rate profiles when the device was not stretched (or at low elongation), while elongation-induced cracks dominated the release rate at high elongation. We also showed that the CV release kinetics could transition from low ("off") to high ("on"), which enhanced when the devices are stretched. This behavior could be exploited in the future for autonomous release systems that release small molecules when stretched by natural processes, for example, movement of joints and muscles.

Hierarchical Self-Assembled Photo-Responsive Tubisomes from a Cyclic Peptide-Bridged Amphiphilic Block Copolymer

Typically, the morphologies of the self-assembled nanostructures from block copolymers are limited to spherical micelles, wormlike micelles and vesicles. Now, a new generation of materials with unique shape and structures, cylindrical soft matter particles (tubisomes), are obtained from the hierarchical self-assembly of cyclic peptide-bridged amphiphilic diblock copolymers. The capacity of obtained photo-responsive tubisomes as potential drug carriers is evaluated. The supramolecular tubisomes pave an alternative way for fabricating polymeric tubular structures, and will expand the toolbox for the rational design of functional hierarchical nanostructures.

On-line monitoring of the sol-gel transition temperature of thermosensitive chitosan/β-glycerophosphate hydrogels by low field NMR

A temperature controlled low field nuclear magnetic resonance (LF-NMR) T₂ relaxometry technique based on the mobility changes of water trapped in hydrogels, was successfully used for on-line determination of the sol-gel transition temperature for chitosan/β-glycerophosphate (CS/GP) hydrogels in real time. The LF-NMR results indicated that the gelation temperature decreased gradually with increasing GP concentration, and the results were supported by both thermogravimetric differential scanning calorimetry (DSC) and rheological findings; however, LF-NMR allows non-destructive monitoring of samples during continuous heating. Moreover, as the mobility of water molecules varies greatly during the sol-gel phase transition, the LF-NMR measurement was more sensitive and accurate (RSD ≤ 0.1 %, n = 5) compared with DSC (RSD: 1.2 %-3.7 %, n = 5) and rheology (RSD: 1.1 %-2.3 %, n = 5).

Triple responsive room temperature luminescence, photochromism and photomagnetism in a Dy(iii)-based linear chain complex

Triple responses of room temperature fluorescence, photochromism and photomagnetism tuned by photo/thermo-switched radicals were realized in a Dy(iii)-based metal–organic complex.

Maxwell-Wagner-Sillars Dynamics and Enhanced Radio-Frequency Elastomechanical Susceptibility in PNIPAm Hydrogel-KF-doped Barium Titanate Nanoparticle Composites

Maxwell-Wagner-Sillars (MWS) dynamics and electromagnetic radio-frequency (RF) actuation of the volumetric phase change are investigated in a hybrid polymer composite consisting of hydrogel suspended with high-k nanoparticles. Poly(N-isopropylacrylamide) (PNIPAm) hydrogels were combined with 10% KF-doped barium titanate (Ba_0.9 K_0.1 TiO_2.9F_0.1, KBT) nanoparticles with highly anisotropic dielectric properties using poly(vinyl alcohol) (PVA) to form a nanoparticle-hydrogel composite. Whereas the addition of PVA to the synthesis maintains a strong volumetric phase transition with polarization and relaxation features similar to standard bulk PNIPAm, the addition of KBT nanoparticles results in reduced volumetric phase transition and MWS polarization due to charge screening of intramolecular interactions. The added nanoparticles and modified synthesis process enhanced the dielectric permittivity of bulk PNIPAm, increased RF conductivity up to 7×, and decreased the specific heat while still maintaining a discontinuous volumetric phase transition. An RF antenna emitting at 544 kHz was only able to actuate a phase change in the composites with modified synthesis versus bulk PNIPAm. Measured heating rates were 3× greater than that of un-modified PNIPAm.

Bioengineering strategies for bone and cartilage tissue regeneration using growth factors and stem cells

Bone and cartilage tissue engineering is an integrative approach that is inspired by the phenomena associated with wound healing. In this respect, growth factors have emerged as important moieties for the control and regulation of this process. Growth factors act as mediators and control the important physiological functions of bone regeneration. Herein, we discuss the importance of growth factors in bone and cartilage tissue engineering, their loading and delivery strategies, release kinetics, and their integration with biomaterials and stem cells to heal bone fractures. We also highlighted the role of growth factors in the determination of the bone tissue microenvironment based on the reciprocal signaling with cells and biomaterial scaffolds on which future bone and cartilage tissue engineering technologies and medical devices will be based upon.

X-ray and UV Dual Photochromism, Thermochromism, Electrochromism, and Amine-Selective Chemochromism in an Anderson-like Zn7 Cluster-Based 7-Fold Interpenetrated Framework

Smart materials are highly desirable over the recent decade due to the growing demand of complicated nature. Stable stimuli-responsive smart materials exhibit widespread potential for applications in smart windows, sensors, separators, chemical valves, and release platforms but are rare. Despite being good candidates, viologen-based multifunctional smart materials are still a challenging task for chemists. To obtain such materials, the judicious strategy is to introduce polynuclear metal-carboxylate clusters as electron donors into a stable framework to increase chromic sensitivity. Toward this endeavor, we have synthesized a novel viologen-based polymer with a unique Anderson-like metal-carboxylate cluster, [Zn₇(bpybc)₃(o-BDC)₆]·2NO₃·6H₂O (bpybc = 1,1'-bis(4-carboxyphenyl)-4,4'-bipyridinium, o-BDC = o-benzenedicarboylic acid) (1), which is a particular 7-fold interpenetrated framework with a 3D pcu network in which bpybc ligand as the linker and Zn₇O₃₀C₁₂ as the second building unit (Zn₇ SBU) were used as 6-connected nodes. More importantly, it shows excellent chromic behavior in response to multiple external stimuli especially soft X-ray and UV dual light, temperature, electricity, and organic amines, which stand out in the viologen-based polymers. Interestingly, the coloration process of 1 from "core" to "edge" is observed upon heating at the appropriate temperature, which has not yet been found in other reported thermochromic materials. Of particular interest for 1 is the couple of quaternary stimuli-sensitive abilities because it simultaneously meets the following conditions: (i) the capability of withstanding high light, higher temperature, extreme pH, and other harsh conditions; and (ii) the high sensitivity to external stimuli keeping away from photodegradation, thermal relaxation, side reactions, and so on. To be noted, 1 has high thermal stability and chemical stability, which are excellent advantages as smart materials. To further develop possible practical utilization, 1 has been doped into the polymer matrixes to construct a hybrid film, which not only keeps the response to external stimuli but also significantly improves the repeatability of the photochromic process, indicating that a new smart device with multi-stimuli-responsive functions will emerge successively in the future.

Self-assembly of polyelectrolyte diblock copolymers at monovalent and multivalent counterions

In this work, the self-assembly behaviors of diblock copolymers consisting of one hydrophobic block and one ionizable polyelectrolyte (PE) block in the presence of monovalent and multivalent counterions are systematically discussed through molecular dynamics simulation. Copolymers are molded as bead-spring chains and the ions are explicitly considered. First, the self-assembled structures of symmetrical block copolymers at different charge fractions are analyzed in detail. Spherical hydrophobic cores are favored by all of the micelles. The effect of counterion valence is much more noticeable at high values of charge fraction. When the PE blocks are fully charged, the presence of multivalent counterions preferably provokes the formation of macroscopic structures. A precipitant spherical micelle is generated in the presence of divalent counterions. Special shapes of coronas are created in the presence of trivalent ions, and a remarkable one dimensional macroscopic cylindrical aggregation of micelles forms; the whole assembly is not typical core-shell micelles, but rather a cylinder with alternating spherical micelles arranged perpendicular to the cylinder axis. The self-assemblies with different lengths of fully charged PE blocks are also discussed. Surprisingly, in the presence of divalent counterions, two dimensional in-plane macroscopic aggregation of micelles is realized when the proportion of PE blocks is larger than 1/2; the self-assembled spherical micelles locate approximately in the same plane to form an inter-linked network. One dimensional aggregation of micelles in the presence of trivalent counterions is maintained with an increased proportion of the PE block. Owing to the dominant intra- and inter-condensation of divalent and trivalent counterions, respectively, two and one dimensional macroscopic aggregation of the micelles is achieved. Our findings indicate that varying the counterion valence is a powerful mechanism to tune the properties of self-assemblies, and the bridging effect introduced by multivalent counterions is the key parameter for the aggregation of the micelles.

Towards feedback-controlled nanomedicines for smart, adaptive delivery

IMPACT STATEMENT

The timing and rate of release of pharmaceuticals from advanced drug delivery systems is an important property that has received considerable attention in the scientific literature. Broadly, these mostly fall into two classes: controlled release with a prolonged release rate or triggered release where the drug is rapidly released in response to an environmental stimulus. This review aims to highlight the potential for developing adaptive release systems that more subtlety modulate the drug release profile through continuous communication with its environment facilitated through feedback control. By reviewing the key elements of this approach in one place (fundamental principles of nanomedicine, enzymatic nanoreactors for medical therapies and feedback-controlled chemical systems) and providing additional motivating case studies in the context of chronobiology, we hope to inspire innovative development of novel "chrononanomedicines."

Stimuli-Responsive Supramolecular Hydrogels and Their Applications in Regenerative Medicine

Supramolecular hydrogels are a class of self-assembled network structures formed via non-covalent interactions of the hydrogelators. These hydrogels capable of responding to external stimuli are considered to be smart materials due to their ability to undergo sol-gel and/or gel-sol transition upon subtle changes in their surroundings. Such stimuli-responsive hydrogels are intriguing biomaterials with applications in tissue engineering, delivery of cells and drugs, modulating tissue environment to promote innate tissue repair, and imaging for medical diagnostics among others. This review summarizes the recent developments in stimuli-responsive supramolecular hydrogels and their potential applications in regenerative medicine. Specifically, various structural aspects of supramolecular hydrogelators involved in self-assembly, the role of external stimuli in tuning/controlling their phase transitions, and how these functions could be harnessed to advance applications in regenerative medicine are focused on. Finally, the key challenges and future prospects for these versatile materials are briefly described.

Materials Science and Design Principles of Growth Factor Delivery Systems in Tissue Engineering and Regenerative Medicine

Growth factors (GFs) are signaling molecules that direct cell development by providing biochemical cues for stem cell proliferation, migration, and differentiation. GFs play a key role in tissue regeneration, but one major limitation of GF-based therapies is dosage-related adverse effects. Additionally, the clinical applications and efficacy of GFs are significantly affected by the efficiency of delivery systems and other pharmacokinetic factors. Hence, it is crucial to design delivery systems that provide optimal activity, stability, and tunable delivery for GFs. Understanding the physicochemical properties of the GFs and the biomaterials utilized for the development of biomimetic GF delivery systems is critical for GF-based regeneration. Many different delivery systems have been developed to achieve tunable delivery kinetics for single or multiple GFs. The identification of ideal biomaterials with tunable properties for spatiotemporal delivery of GFs is still challenging. This review characterizes the types, properties, and functions of GFs, the materials science of widely used biomaterials, and various GF loading strategies to comprehensively summarize the current delivery systems for tunable spatiotemporal delivery of GFs aimed for tissue regeneration applications. This review concludes by discussing fundamental design principles for GF delivery vehicles based on the interactive physicochemical properties of the proteins and biomaterials.

Plasma Deposition and UV Light Induced Surface Grafting Polymerization of NIPAAm on Stainless Steel for Enhancing Corrosion Resistance and Its Drug Delivery Property

When stainless steel is implanted in human bodies, the corrosion resistance and biocompatibility must be considered. In this study, first, a protective organic silicone film was coated on the surface of stainless steel by a plasma deposition technique with a precursor of hexamethyldisilazane (HMDSZ). Then, ultraviolet (UV) light-induced graft polymerization of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) in different molar ratios were applied onto the organic silicone film in order to immobilize thermos-/pH-sensitive composite hydrogels on the surface. The thermo-/pH-sensitive composite hydrogels were tested at pH values of 4, 7.4 and 10 of a phosphate buffer saline (PBS) solution at a fixed temperature of 37 °C to observe the swelling ratio and drug delivery properties of caffeine which served as a drug delivery substance. According to the results of Fourier Transformation Infrared (FTIR) spectra and a potential polarization dynamic test, the silicone thin film formed by plasma deposition not only improved the adhesion ability between the substrate and hydrogels but also exhibited a high corrosion resistance. Furthermore, the composite hydrogels have an excellent release ratio of up to 90% of the absorbed amount after 8h at a pH of 10. In addition, the results of potential polarization dynamic tests showed that the corrosion resistance of stainless steel could be improved by the HMDSZ plasma deposition.

Adjustable Tribological Behavior of Glucose-Sensitive Hydrogels

Stimuli-responsive hydrogels have been considered to have various applications in numerous fields. In the present work, a double-network (DN) hydrogel has been synthesized. The copolymers of 2-acrylamide-2-methylpropane sulfonic acid (AMPS) and acrylamide (AM) [P(AMPS- co-AM)] are prepared as the 1st network and poly(acrylic acid) as the 2nd network. This DN hydrogel is sensitive to glucose by introducing the glucose-sensitive group phenylboronic acid to the network. The tribological properties of this glucose-sensitive DN hydrogel have been investigated using a universal mechanical tester (UMT-5). The tribological results show that the friction coefficient varied with the glucose solution. The friction coefficient increased to a maximum of 0.06, and finally decreased to 0.025 with the increase in the glucose concentration. An adjustable friction coefficient of the hydrogel, between 0.025 and 0.056, was achieved along with the change of lubricant. According to the tribological experimental results and the analysis of the DN structure, it can be deduced that a hydrated layer exists in the interface of the hydrogel. The hydrated layers consisting of water molecules are bounded with the hydrophilic group of the hydrogel network by hydrogen bonds. The change in the number of water molecules leads to the difference in the water content of the hydrogel, which further resulted in the various tribological properties. In addition, the hydrogel's mesh size also has an impact on the change in friction coefficient. In general, the adjustable friction of the hydrogel in a glucose environment is achieved.

Electrically controlled drug release using pH-sensitive polymer films

Drug delivery systems (DDS) that allow spatially and temporally controlled release of drugs are of particular interest in the field of drug delivery. These systems create opportunities for individually tailored doses of drugs to be administered as well as reduce side effects by localizing the initial drug dose to the organ of interest. We present an electroresponsive DDS in the form of a bioresorbable nanocomposite film which operates at low voltages (<-2 V). The method is based on electrochemically generating local pH changes at an electrode surface to induce dissolution of a pH-sensitive polymer, which is used as the carrier material. We previously demonstrated this proof-of-concept using a poly(methyl methacrylate-co-methacrylic acid) (co-PMMA) copolymer commercially marketed as Eudragit S100 (EGT). However, as EGT is soluble at a pH above 7, experiments were performed in isotonic saline solutions (pH ∼ 6.4). In this work, we have synthesized co-PMMA with a variety of monomer ratios to shift the solubility of the copolymer to higher pH values, and developed a polymer that can be used under physiologically relevant conditions. The generalizability of this system was demonstrated by showing controlled release of different drug molecules with varying parameters like size, hydrophobicity, and pKa. Fluorescein, a hydrophilic model compound, meloxicam, a hydrophobic anti-arthritic medication, curcumin, a small molecule with anti-cancer therapeutic potential, and insulin, a polypeptide hormone used in the treatment of hypoglycemia, could all be released on demand with minimal leakage. The drug loading achieved was ∼32 wt% by weight of the co-polymer.

Advances in Biomaterials for Drug Delivery

Advances in biomaterials for drug delivery are enabling significant progress in biology and medicine. Multidisciplinary collaborations between physical scientists, engineers, biologists, and clinicians generate innovative strategies and materials to treat a range of diseases. Specifically, recent advances include major breakthroughs in materials for cancer immunotherapy, autoimmune diseases, and genome editing. Here, strategies for the design and implementation of biomaterials for drug delivery are reviewed. A brief history of the biomaterials field is first established, and then commentary on RNA delivery, responsive materials development, and immunomodulation are provided. Current challenges associated with these areas as well as opportunities to address long-standing problems in biology and medicine are discussed throughout.

Poly(N-isopropylacrylamide) microgel-based etalons for the label-free quantitation of estradiol-17β in aqueous solutions and milk samples

A novel estradiol-17β (E2) biosensor was constructed from poly(N-isopropylacrylamide) (pNIPAm) microgel-based etalons by modification of their outermost Au layer with an E2 binding 75-mer DNA aptamer. When E2 is not present in the solution, the aptamer forms a loose/linear structure that allows ions to pass through and into the microgel layer. The ions can change the solvation state of the microgels, which changes the optical properties of the etalon. When E2 is present in the solution, the aptamer binds the E2 and undergoes a conformational change to a form that can block the diffusion of salt ions into the microgel layer. This blocking decreases the response of the device to salt exposure, which can be related to the concentration of E2 in solution. Using this approach, E2 sensor showed a dynamic range of 0.9-200 pg/mL with a calculated detection limit of 0.9 pg/mL (3.2 pM) E2, and the lowest measured concentration of E2 is 5.0 pg/mL. This sensor also showed low cross reactivity with progesterone, a similar steroid hormone. Moreover, this sensor could be regenerated five times without losing its sensitivity. Finally, we demonstrated that the sensor could also be used to quantify E2 in commercial skim and 2% milk, as well as farm milk directly without any pre-treatment. The successful quantitation of E2 in unprocessed milk demonstrates its potential use as a "cow-side" testing device for the dairy industry. Graphical abstract ᅟ.

Hollow polymer nanocapsules: synthesis, properties, and applications

Hollow polymer nanocapsules (HPNs) have gained tremendous interest in recent years due to their numerous desirable properties compared to their solid counterparts.