Dermal absorption of environmental contaminants from soil and sediment: a critical review

Dermal absorption of high molecular weight parent and alkylated polycyclic aromatic hydrocarbons from manufactured gas plant soils using in vitro assessment

An enhanced in vitro human dermal bioavailability method was developed to measure the release of twenty parent and seven alkylated high molecular weight (HMW) polycyclic aromatic hydrocarbons (PAHs) from contaminated soils collected from five former manufactured Gas Plants (MGP) in England. GC-MS/MS was used to quantify HMW PAHs in soil, Strat-M artificial membrane representing skin, and synthetic receptor solution (RS) representing systemic circulation at 1-h, 10-h, and 24-h timesteps. Fluoranthene and pyrene exhibited the highest fluxes from soils to membrane (ranging from 9.5 - 281 ng/cm2/h) and soil to RS ( Collapse

Key Words

• Bioavailability
• PAH
• Percutaneous
• Risk assessment

Collapse

MESH Headings

• Humans
• Polycyclic Aromatic Hydrocarbons/analysis
• Soil
• Tandem Mass Spectrometry
• Molecular Weight
• Soil Pollutants/analysis
• Pyrenes
• Environmental Monitoring/methods
• Fluorenes

Collapse

Grants Collapse

Affiliation(s)

Alison M Williams-Clayson British Geological Survey, Keyworth, Nottinghamshire, UK; University of Nottingham, Nottingham, UK
Christopher H Vane British Geological Survey, Keyworth, Nottinghamshire, UK
Matthew D Jones University of Nottingham, Nottingham, UK
Russell Thomas WSP UK, Bristol, UK
Christopher Taylor National Grid, Warwick, UK
Darren J Beriro British Geological Survey, Keyworth, Nottinghamshire, UK.

Collapse

Methods for the characterisation of dermal uptake: Progress and perspectives for organophosphate esters

Organophosphate esters (OPEs) are a group of pollutants that are widely detected in the environment at high concentrations. They can adversely affect human health through multiple routes of exposure, including dermal uptake. Although attention has been paid to achieving an accurate and complete quantification of the dermal uptake of OPEs, existing evaluation methods and parameters have obvious weaknesses. This study reviewed two main categories of methodologies, namely the relative absorption (RA) model and the permeability coefficient (PC) model, which are widely used to assess the dermal uptake of OPEs. Although the PC model is more accurate and is increasingly used, the most important parameter in this model, the permeability coefficient (Kp), has been poorly characterised for OPEs, resulting in considerable errors in the estimation of the dermal uptake of OPEs. Thus, the detailed in vitro methods for the determination of Kp are summarised and sorted. Furthermore, the commonly used skin membranes are identified and the factors affecting Kp and corresponding mechanisms are discussed. In addition, the experimental conditions, conclusions, and available data on Kp values of the OPEs are thoroughly summarised. Finally, the corresponding knowledge gaps are proposed, and a more accurate and sophisticated experimental system and unknown Kp values for OPEs are suggested.

Analysis of micro- and nanoplastics in wastewater treatment plants: key steps and environmental risk considerations

The analysis of micro- and nanoplastics (MNPs) in the environment is a critical objective due to their ubiquitous presence in natural habitats, as well as their occurrence in various food, beverage, and organism matrices. MNPs pose significant concerns due to their direct toxicological effects and their potential to serve as carriers for hazardous organic/inorganic contaminants and pathogens, thereby posing risks to both human health and ecosystem integrity. Understanding the fate of MNPs within wastewater treatment plants (WWTPs) holds paramount importance, as these facilities can be significant sources of MNP emissions. Additionally, during wastewater purification processes, MNPs can accumulate contaminants and pathogens, potentially transferring them into receiving water bodies. Hence, establishing a robust analytical framework encompassing sampling, extraction, and instrumental analysis is indispensable for monitoring MNP pollution and assessing associated risks. This comprehensive review critically evaluates the strengths and limitations of commonly employed methods for studying MNPs in wastewater, sludge, and analogous environmental samples. Furthermore, this paper proposes potential solutions to address identified methodological shortcomings. Lastly, a dedicated section investigates the association of plastic particles with chemicals and pathogens, alongside the analytical techniques employed to study such interactions. The insights generated from this work can be valuable reference material for both the scientific research community and environmental monitoring and management authorities.

Risk assessment of sediment PAH, BTEX, and emerging contaminants in Chanomi Creek Niger Delta, Nigeria

This study assessed the levels of polycyclic aromatic hydrocarbons (PAHs), benzene, toluene, ethylbenzene, and xylene (BTEX), and emerging contaminants in Chanomi Creek. Sediment samples were collected between March 2019 and July 2020 to evaluate the concentrations of PAH, BTEX, and emerging contaminants using GC-MS and GC-FID with Headspace extraction. Results indicated mean PAH concentrations were 22.691 ± 15.09 µg/kg. The highest individual PAH concentrations were fluorene (7.085 µg/kg), naphthalene (4.517 µg/kg), and phenanthrene (3.081 µg/kg). Carbazole (0.828 µg/kg) was discovered as a novel environmental toxin with dioxin-like toxicity and widespread prevalence in sediments. The most common congener (25%) was ethylbenzene, followed by toluene and ortho- and meta-xylene (21%) and benzene (13%). The analysis of diagnostic ratios revealed that the main factors responsible for the presence of PAHs in the study area are the residential use of firewood, emissions from industrial activities, bush burning, and petroleum slicks. The risk assessment indicated that most PAHs exceeded the permissible risk quotient values, suggesting a moderate to high ecological risk. However, cutaneous exposure to PAHs and BTEX was found to have minimal impact on human health, with no significant hazards identified in adults and children. Nevertheless, the study revealed low cancer risks associated with PAH and BTEX compounds for both age groups. The continued discharge of PAHs and BTEX compounds into Chanomi Creek could have significant long-term negative effects on human and aquatic health. Thus, contamination risk awareness programs and the development of stringent contextual thresholds for identified contaminants could enhance environmental and public health protection.

Incorporating oral, inhalation and dermal bioaccessibility into human health risk characterization following exposure to Chromated Copper Arsenate (CCA)-contaminated soils

Exposure to potentially toxic metal(loid)s (PTMs) in soil may happen via ingestion, inhalation, and dermal pathway. A more accurate risk characterization should consider PTM bioavailability. Using ten soil samples collected in the Montreal area (Canada) near CCA-treated utility poles, this study aims to characterize non-carcinogenic and carcinogenic human health risks associated with As, Cr, Cu, Pb, and Zn through a multi-pathway exposure approach. This innovative study incorporates, for the first time, the bioaccessible fraction of the metal(loid)s for three exposure routes and two different scenarios. For the residential and industrial scenarios, the oral and dermal pathways yielded a hazard index (HI) much higher than 1 with and without bioaccessibility considerations (range 1.7 - 349 without bioaccessibility and 0.8-134 with bioaccessibility), whereas the inhalation pathway caused a lower hazard (HI < 1). For the dermal pathway, the hazard quotient was higher when bioaccessibility of field-collected samples was considered due to inherent assumptions from the US EPA soil approach to calculate the dermal dose. For carcinogenic risk, As and Pb were the most significant contributors to risk for the oral pathway, followed by the same elements for the dermal pathway. The overall carcinogenic risk was higher than the acceptable risk ( > 10-4) with and without bioaccessibility considerations (range 1.9E-4 - 9.6E-3 without bioaccessibility and 6.8E-5 - 3.8E-3 with bioaccessibility). Bioaccessibility tests provide a more accurate assessment of exposure to PTMs compared to total concentrations in soils.

Effects of Artificial Sweat Formulation and Extraction Temperature on Estimation of the Dermal Bioaccessibility of Potentially Toxic Elements in a Contaminated Soil from an E-Waste Recycling Site

Informal recycling of electronic waste leads to soil contamination that can impact human health. To accurately assess exposure to potentially toxic elements (PTE) in soil it is necessary to consider their bioavailability through ingestion, inhalation and dermal contact. However, bioaccessibility tests that estimate dermal absorption following adhesion of contaminated soil particles to skin are not well established. In this study the concentrations of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn were estimated in the <45 µm particle size fraction of a bulk composite soil from an e-waste recycling site using five different artificial sweat formulations. Extractions were performed at temperatures ranging from 17 to 47 °C to investigate the effect of ambient temperature on bioaccessibility. Results obtained using the different artificial sweats were not consistent with one another. In particular, the NIHS 96-10 formulation solubilized larger amounts of analytes (ranging from 6.3 times the next most effective extractant for Cu to 1700 times the next most effective for Pb). There was a general increase in release of PTE with increasing temperature, except for As. Although trends varied between analytes and formulations, this highlights the need to consider ambient temperature when estimating dermal bioaccessibility of PTE in soil.

Soil-skin adherence measures from hand press trials in a Gulf study of exposures

Marine oil spills and the resulting environmental contamination is common along coastal areas; however, information is lacking about the safety of impacted beaches for public use, especially for the most vulnerable population: children. One route of exposure for children at oil impacted beaches is through contact with sands. The purpose of this study was to evaluate beach sand skin adherence for children under the age of seven. Each of 122 children participated in a hand press trial conducted at one of four different U.S. beaches (two in Miami, FL, and two in Galveston, TX USA). During the hand press trials, hand conditions of the children were randomized (dry, wet, or with sunscreen), and soil adherence (mass of sand per palmar surface area of the hand) and the maximum pressure applied (force applied per area of hand) was measured and calculated. Each child was instructed to press their hands on a soil laden tray for 5 s and pressure of contact was measured using a scale. Results (n = 98) showed that the average soil adherence for both palmar hands across the four beaches ranged from 0.200 to 234 mg/cm² with an average of 35.7 mg/cm², with boys (40.4 mg/cm²) showing slightly higher means than girls (31.7 mg/cm²), but these differences were not significant even after adjusting for age. Among the three conditions evaluated, the highest loading was measured for children with wet hands (mean 65.3 mg/cm²), followed by dry hands (mean 24.5 mg/cm²). Sunscreen hands (mean 23.2 mg/cm²) had the lowest loadings. The pressure of contact ranged from 0.180 to 1.69 psi and varied by age groups and by height and weight, where pressure of contact did not have a significant influence on soil adherence. The average adhered sand grain size and average ambient sand grain size both had a statistically significant impact on hand soil adherence. Overall results from this study can be utilized in exposure and risk assessment models to evaluate the possible health impacts from contaminants found in beach sands.

1-Hydroxypyrene-based micelle-forming sensors for the visual detection of RDX/TNG/PETN-based bomb plots in water

New micelle-forming fluorescence molecular sensors are reported based on 1-hydroxypyrene designed exclusively for the detection of nitro-aliphatic explosives/taggants.

Dermal absorption of benzo[a]pyrene into human skin from soil: Effect of artificial weathering, concentration, and exposure duration

In vitro assessments of ¹⁴C-benzo[a]pyrene (BaP) absorption through human epidermis were conducted with the sub-63-μm fraction of four test soils containing different amounts of organic and black carbon. Soils were artificially weathered for eight weeks and applied to epidermis at nominal BaP concentrations of 3 and 10 mg/kg for 8 or 24 h. Experiments were also conducted at 24 h with unweathered soils and with BaP deposited onto skin from acetone at a comparable chemical load. For the weathered soils, absorption was independent of the amount of organic or black carbon, the mass in the receptor fluid was proportional to exposure duration but independent of concentration, and the mass recovered in the skin after washing was proportional to concentration and independent of exposure time. Results from the weathered and unweathered soils were similar except for the mass recovered in the washed skin, which was lower for the weathered soil only at the higher concentration. We hypothesize that chemical concentrations exceeded the BaP sorption capacity accessible within the artificial weathering timeframe for all soils tested, and that BaP mass in the washed skin was dominated by particles that were not removed by washing. Fluxes into and through skin from soils were lower by an order of magnitude than from acetone-deposited BaP.

Skin permeation of polycyclic aromatic hydrocarbons: A solvent-based in vitro approach to assess dermal exposures against benzo[a]pyrene and dibenzopyrenes

Consumer products with high contents of polycyclic aromatic hydrocarbons (PAHs) were repeatedly identified by market surveillance authorities. Since several of the individual compounds have been identified as genotoxic carcinogens, there might be health risks associated with the usage of these items. It therefore becomes reasonable to argue to reduce PAH contents in consumer products to a level as low as possible. This study presents data on the migration of PAHs from consumer products into aqueous sweat simulant or aqueous ethanol and on its combined migration and penetration into human skin. Product specimens were either submerged in simulant, or placed directly on test skins in Franz cell chambers to simulate dermal contacts. Migration of hexacyclic dibenzopyrenes became detectable by using ethanolic simulant, but not in aqueous sweat simulant. Similarly, migration of the pentacyclic model carcinogen benzo[a]pyrene (B[a]P) into aqueous sweat simulant was significantly lower when compared with human skin or skin models. The results point to a gross underestimation (about two orders of magnitude) when using aqueous sweat simulant instead of human skin for assessing PAH migration. On the other side, the usage of 20% ethanol as simulant revealed good agreement to the actual exposure of human skin against B[a]P migrating out of contaminated products. Our results underline that aqueous sweat simulant is not suitable to study dermal migration of highly lipophilic compounds.

Effect of Polycyclic Aromatic Hydrocarbon Source Materials and Soil Components on Partitioning and Dermal Uptake

The bioavailability of polycyclic aromatic hydrocarbons (PAHs) in soils can be influenced by the source material they are emitted within, the properties of the receiving soil, weathering processes, and the concentration of PAHs. In this study 30 contaminated soils were constructed with common PAH sources (fuel oil, soot, coal tar based skeet particles) and direct spike with a solvent added to different types and contents of soil organic matter and minerals to achieve PAH concentrations spanning 4 orders of magnitude. Source material had the greatest impact on PAH partitioning. Soils containing skeet generally exhibited the highest KD values, followed by soot, fuel oil, and solvent spiked soils. Among all soil compositions, the presence of 2% charcoal had the largest enhancement of KD. Partitioning behavior could not be predicted by an organic carbon and black carbon partitioning model. Including independently measured partitioning behavior of the soil components and PAH sources allowed better prediction but still suffered from issues of interaction (oil sorption in peat) and highly nonlinear partitioning with depletion (for skeet). Dermal absorption of PAHs measured using pig skin was directly related to the freely dissolved aqueous concentration in soil and not the total concentration in the soil. Overall, we show that PAH source materials have a dominating influence on partitioning, highlighting the importance of using native field soils in bioavailability and risk assessments.

A review of the current state of the art of physiologically-based tests for measuring human dermal in vitro bioavailability of polycyclic aromatic hydrocarbons (PAH) in soil

Polycyclic Aromatic Hydrocarbons are classed as Persistent Organic Pollutants, a large group of compounds that share similar characteristics. They are lipophilic, resistant to degradation in the environment and harmful to human and environmental health. Soil has been identified as the primary reservoir for Polycyclic Aromatic Hydrocarbons in the United Kingdom. This study reviews the literature associated with, or is relevant to, the measurement and modelling of dermal absorption of Polycyclic Aromatic Hydrocarbons from soils. The literature illustrates the use of in vivo, in vitro and in silico methods from a wide variety of scientific disciplines including occupational and environmental exposure, medical, pharmaceutical and cosmetic research and associated mathematical modelling. The review identifies a number of practical shortcomings which must be addressed if dermal bioavailability tests are to be applied to laboratory analysis of contaminated soils for human health risk assessment.

Oral Bioavailability, Bioaccessibility, and Dermal Absorption of PAHs from Soil-State of the Science

This article reviews the state of the science regarding oral bioavailability, bioaccessibility, and dermal absorption of carcinogenic polycyclic aromatic hydrocarbons (cPAHs) in soil by humans, and discusses how chemical interactions may control the extent of absorption. Derived from natural and anthropomorphic origins, PAHs occur in a limited number of solid and fluid matrices (i.e., PAH sources) with defined physical characteristics and PAH compositions. Existing studies provide a strong basis for establishing that oral bioavailability of cPAHs from soil is less than from diet, and an assumption of 100% relative bioavailability likely overestimates exposure to cPAHs upon ingestion of PAH-contaminated soil. For both the oral bioavailability and dermal absorption studies, the aggregate data do not provide a broad understanding of how different PAH source materials, PAH concentrations, or soil chemistries influence the absorption of cPAHs from soil. This article summarizes the existing studies, identifies data gaps, and provides recommendations for the direction of future research to support new default or site-specific bioavailability adjustments for use in human health risk assessment.

Evaluation of in vitro vs. in vivo methods for assessment of dermal absorption of organic flame retardants: a review

There is a growing interest to study human dermal exposure to a large number of chemicals, whether in the indoor or outdoor environment. Such studies are essential to predict the systemic exposure to xenobiotic chemicals for risk assessment purposes and to comply with various regulatory guidelines. However, very little is currently known about human dermal exposure to persistent organic pollutants. While recent pharmacokinetic studies have highlighted the importance of dermal contact as a pathway of human exposure to brominated flame retardants, risk assessment studies had to apply assumed values for percutaneous penetration of various flame retardants (FRs) due to complete absence of specific experimental data on their human dermal bioavailability. Therefore, this article discusses the current state-of-knowledge on the significance of dermal contact as a pathway of human exposure to FRs. The available literature on in vivo and in vitro methods for assessment of dermal absorption of FRs in human and laboratory animals is critically reviewed. Finally, a novel approach for studying human dermal absorption of FRs using in vitro three-dimensional (3D) human skin equivalent models is presented and the challenges facing future dermal absorption studies on FRs are highlighted.

Percutaneous absorption from soil

Abstract Some natural sites, as a result of contaminants emitted into the air and subsequently deposited in soil or accidental industrial release, have high levels of organic and non-organic chemicals in soil. In occupational and recreation settings, these could be potential sources of percutaneous exposure to humans. When investigating percutaneous absorption from soil - in vitro or vivo - soil load, particle size, layering, soil "age" time, along with the methods of performing the experiment and analyzing the results must be taken into consideration. Skin absorption from soil is generally reduced compared with uptake from water/acetone. However, the absorption of some compounds, e.g., pentachlorophenol, chlorodane and PCB 1254, are similar. Lipophilic compounds like dichlorodiphenyltrichloroethane, benzo[A]pyrene, and metals have the tendency to form reservoirs in skin. Thus, one should take caution in interpreting results directly from in vitro studies for risk assessment; in vivo validations are often required for the most relevant risk assessment.

Desorption of polycyclic aromatic hydrocarbons from field-contaminated soil to a two-dimensional hydrophobic surface before and after bioremediation

Dermal exposure can represent a significant health risk in settings involving potential contact with soil contaminated with polycyclic aromatic hydrocarbons (PAHs). However, there is limited work on the ability of PAHs in contaminated soil to reach the skin surface via desorption from the soil. We evaluated PAH desorption from a field-contaminated soil to a two-dimensional hydrophobic surface (C18 extraction disk) as a measure of potential dermal exposure as a function of soil loading (5-100 mg dry soil cm(-2)), temperature (20-40°C), and soil moisture content (2-40%) over periods up to 16d. The efficacy of bioremediation in removing the most readily desorbable PAH fractions was also evaluated. Desorption kinetics were described well by an empirical two-compartment kinetic model. PAH mass desorbed to the C18 disk kept increasing at soil loadings well above the estimated monolayer coverage, suggesting mechanisms for PAH transport to the surface other than by direct contact. Such mechanisms were reinforced by observations that desorption occurred even with dry or moist glass microfiber filters placed between the C18 disk and the soil. Desorption of all PAHs was substantially reduced at a soil moisture content corresponding to field capacity, suggesting that transport through pore air contributed to PAH transport to the C18 disk. The lower molecular weight PAHs had greater potential to desorb from soil than higher molecular weight PAHs. Biological treatment of the soil in a slurry-phase bioreactor completely eliminated PAH desorption to the C18 disks.

Differences in metal concentration by particle size in house dust and soil

The majority of particles that adhere to hands are <63 μm in diameter yet risk assessments for soil remediation are typically based on soil samples sieved to <250 μm. The objective of our study was to determine if there is a significant difference in metal concentration by particle size in both house dust and soil. We obtained indoor dust and yard soil samples from 10 houses in Tucson, Arizona. All samples were sieved to <63 μm and 63 to <150 μm and analyzed for 30 elements via ICP-MS following nitric acid digestion. We conducted t-tests of the log-transformed data to assess for significant differences that were adjusted with a Bonferroni correction to account for multiple comparisons. In house dust, significant differences in concentration were observed for Be, Al, and Mo between particles sizes, with a higher concentration observed in the smaller particle sizes. Significant differences were also determined for Mg, Ca, Cr, Co, Cu, Ge, Zr, Ag, Ba, and Pb concentration in yard soil samples, with the higher concentration observed in the smaller particles size for each element. The results of this exploratory study indicate that current risk assessment practices for soil remediation may under estimate non-dietary ingestion exposure. This is of particular concern for young children who are more vulnerable to this exposure route due to their high hand mouthing frequencies. Additional studies with a greater number of samples and wider geographic distribution with different climates and soil types should be completed to determine the most relevant sampling practices for risk assessment.

Assessment of nonoccupational exposure to DDT in the tropics and the north: relevance of uptake via inhalation from indoor residual spraying

BACKGROUND

People who live in dwellings treated with indoor residual spraying (IRS) of DDT [1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane] for disease-vector control in the tropics and indigenous populations in the Arctic who consume marine mammals experience high nonoccupational exposure to DDT. Although the use of DDT in IRS is rising, the resulting nonoccupational exposure is poorly characterized.

OBJECTIVES

We have provided a comparative assessment of exposure to DDT and its metabolites in the general population of the tropical and northern regions and in highly exposed populations in these regions.

METHODS

We compiled > 600 average or median DDT concentrations from the peer-reviewed literature, representing > 23,000 individual measurements in humans, food, air, soil, and dust. We use Monte Carlo sampling of distributions based on these data to estimate distributions of population- and route-specific uptake. We evaluate our exposure estimates by comparing them with biomonitoring data.

RESULTS

DDT concentrations are highest in people living in IRS-treated houses and lowest in the northern general population, differing by a factor of about 60. Inuits and the general population in the tropics have similar concentrations. Inhalation exposure explains most of the difference in concentration between the highly exposed and the general population in the Tropics. Calculated exposure levels are consistent with human biomonitoring data.

CONCLUSIONS

Nonoccupational inhalation exposure is a relevant exposure pathway for people living in homes treated by IRS of DDT. Continued monitoring of time trends and DDE to DDT ratios in the Tropics and in the North is needed to identify a possible slowdown in concentration decline and the influence of ongoing DDT use.

The mismeasure of dermal absorption

The results of dermal absorption experiments are routinely and often exclusively reported in terms of fractional absorption. However, fractional absorption is not generally independent of skin loading conditions. As a consequence, experimental outcomes are commonly misinterpreted. This can lead in turn to poor estimation of exposures under field conditions and inadequate threat assessment. To aid interpretation of dermal absorption-related phenomena, a dimensionless group representing the ratio of mass delivery to plausible absorptive flux under experimental or environmental conditions is proposed. High values of the dimensionless dermal number (N(DERM)) connote surplus supply (i.e., flux-limited) conditions. Under such conditions, fractional absorption will generally depend on load and should not be assumed transferable to other conditions. At low values of N(DERM), dermal absorption will be delivery-limited. Under those conditions, high fractional absorption is feasible barring maldistribution or depletion due to volatilization, washing, mechanical abrasion or other means. Similar logic also applies to skin sampling and dermal toxicity testing. Skin surface sampling at low N(DERM) is unlikely to provide an appropriate measure of potential dermal dose due to depletion, whereas dermal toxicity testing at high N(DERM) is unlikely to show dose dependence due to saturation.

A novel "by difference" method for assessing dermal absorption of polycyclic aromatic hydrocarbons from soil at federal contaminated sites

A highly precautionary cost-effective method for estimating dermal absorption using data from 24-h skin soap washes from in vitro dermal absorption tests in Bronaugh flow-through diffusion cells with human skin is reported. Skin was dosed with 16 U.S. Environmental Protection (EPA) priority polycyclic aromatic hydrocarbons (PAH) applied in mixture each at 2 μg/ml (ppm) in acetone without soil. Concurrent tests were conducted with an unspiked aqueous suspension of PAH-contaminated soil obtained from a Canadian federal contaminated site. Percentage dermal absorption was estimated "by difference" from the applied dose and that detected by high-performance liquid chromatography (HPLC) in 24-h skin soap washes. The dermal absorption for 11 PAH ranged from 71 to 88.3% without and with soil, respectively. Lower absorption was found for 5 PAH in soil, in the range of 26.4 to 60.8%. Data could not be corrected for evaporative loss due to inconsistent data from Tenax adsorbent. Corroboratory gas chromatography/mass spectroscopy (GC/MS) tests are needed. Previously published in vitro data from the authors' laboratory supported use of the "by difference" method.

Health ranking of ingested semi-volatile organic compounds in house dust: an application to France

People spend most of their time indoors. Dust settled in the home may be contaminated by semi-volatile organic compounds (SVOCs). Exposure to these compounds is of great concern, in particular for infants. Their number is large so arose the question of which ones should be selected for dust ingestion exposure assessment. This work proposes a health ranking of SVOCs ingested through settled dust. This ranking is based on the toxicity and contamination of SVOCs in dust. Data on compounds and contamination was retrieved from a bibliographic review. Where possible, toxicity data was retrieved from databases, otherwise it was calculated from raw data. One hundred and fifty-six SVOCs were selected, 66 of which were prioritized. Forty-two could not be prioritized because contamination data was below the limit of detection, and 48 could not be prioritized because there was no contamination or toxicity data. The top-ranked compounds were phthalates, pesticides, short-chain chlorinated paraffins, PBDEs, PFCs, organotins, PCBs, and PAHs. As most of these have reprotoxic and neurotoxic properties, an integrated multi-pollutants approach to exposure is required and simultaneous measurement methods should be developed.

PRACTICAL IMPLICATIONS

The large number of compounds identified in settled dust in recent years should be considered for the assessment of exposure to dust ingestion. This work provides a health ranking of SVOCs ingested through settled dust. Most of the top-ranked compounds have reprotoxic and neurotoxic properties, and particular attention should, therefore, be paid to them in future studies.

Measuring the saturation limit of low-volatility organic compounds in soils: implications for estimates of dermal absorption

Estimating dermal absorption from contaminated soils typically requires extrapolations from measurements obtained on soils artificially contaminated at much larger concentrations. Such extrapolations should be constrained by the fact that maximum absorption will occur for the largest possible concentration of chemical on the soil without neat chemical being present; i.e., at the soil saturation limit (S(soil)). Saturation limits of two low-volatility model compounds (4-cyanophenol and methyl paraben) were determined on the 38-63μm sieve fraction of four soils with different fractions of organic carbon (f(oc)=0.015-0.45) and specific surface areas (σ(soil)=4-34m(2) g(-1)) using two methods: equilibrium uptake into silicone rubber membranes and differential scanning calorimetry. Except for Pahokee peat, which had the largest f(oc), a model assuming contributions from both surface adsorption and organic carbon absorption provided excellent predictions of S(soil). In all soils, the surface saturation concentration of both chemicals was estimated at 2.2mg m(-2). The saturation concentration of 4-cyanophenol in the soil organic carbon was 1.7-fold higher than methyl paraben, which is consistent with the estimated solubility limits of these two chemicals in octanol.

Contaminated soils (III): in vitro dermal absorption of ethylene glycol and nonylphenol in human skin

Dermal absorption of contaminants from soils at federal contaminated sites in Canada was investigated using one hydrophile, (14)C-ethylene glycol (EG), and one lipophile, (14)C-nonylphenol (NP). In vitro dermal absorption of EG and NP was examined in dermatomed (0.4-0.5 mm) human skin using Bronaugh Teflon flow-through cells with Hanks HEPES buffered (pH 7.4) receiver solution with 4% bovine serum albumin (BSA). Tests were conducted under occlusive conditions with and without a commercial gardening soil spiked with EG or NP applied to skin at a soil load of 5 mg/cm(2). With percent absorption in skin depot included, a total of 9.9 + or - 6.28% (n = 6) and 34.8 + or - 8.47% (n = 6) absorption of EG with and without soil, respectively, and 20.6 + or - 5.56% (n = 7) and 41.1 + or - 6.46% (n = 7) of NP, with and without soil, respectively, were obtained. For tests without soil a reverse pattern was observed with significantly lower percent absorption into the receiver than depot with the lipophile NP, but significantly higher percent absorption in receiver versus depot for the hydrophile EG. This pattern was different in tests with soil, and caution needs to be exercised when extrapolating data from in vitro tests conducted without soil in human health risk assessments at contaminated sites.