Tuning the chemiluminescence of a luminol flow using plasmonic nanoparticles

Spontaneous Production of I2 at the Surface of Aqueous Iodide Solutions

Several groups have recently reported spontaneous production of atmospherically reactive species, including molecular iodine (I2) at the air-water interface of droplets. In this study, glancing angle laser-induced fluorescence spectroscopy was used to track the luminol fluorescence at the surface of sodium iodide (NaI) and sodium chloride (NaCl) solutions. Although luminol fluorescence is hardly quenched by halide anions, even up to fairly high concentrations, it is effectively quenched by I2. We observe luminol fluorescence quenching at the surface of NaI solutions but not at the surface of NaCl solutions, pointing to the formation of I2 at the surface of NaI solutions. This provides further support for the proposal that the strong electric field or the reduction solvation present at the air-water interface can initiate spontaneous iodide activation and other chemistry there. The spontaneous production of I2 at the surface of aqueous iodide solutions presents a previously unconsidered source of iodine in the atmosphere.

Microfluidic flow-injection aptamer-based chemiluminescence platform for sulfadimethoxine detection

Gold nanoparticle–catalyzed chemiluminescence (CL) of luminol is an attractive alternative to strategies relying on enzymes, as their aggregation leads to significantly enhanced CL signals. Consequently, analytes disturbing such aggregation will lead to an easy-to-quantify weakening of the signal. Based on this concept, a homogeneous aptamer-based assay for the detection of sulfadimethoxine (SDM) has been developed as a microfluidic CL flow-injection platform. Here, the efficient mixing of gold nanoparticles, aptamers, and analyte in short channel distances is of utmost importance, and two-dimensional (2D) and three-dimensional (3D) mixer designs made via Xurography were investigated. In the end, since 2D designs could not provide sufficient mixing, a laminated 3D 5-layer microfluidic mixer was developed and optimized with respect to mixing capability and observation by the charge-coupled device (CCD) camera. Furthermore, the performance of standard luminol and its more hydrophilic derivative m-carboxy luminol was studied identifying the hydrophilic derivative to provide tenfold more signal enhancement and reliable results. Finally, the novel detection platform was used for the specific detection of SDM via its aptamer and yielded a stunning dynamic range over 5 orders of magnitude (0.01–1000 ng/ml) and a limit of detection of 4 pg/ml. This new detection concept not only outperforms other methods for SDM detection, but can be suggested as a new flow-injection strategy for aptamer-based rapid and cost-efficient analysis in environmental monitoring and food safety.

A Review of Optical Imaging Technologies for Microfluidics

Microfluidics can precisely control and manipulate micro-scale fluids, and are also known as lab-on-a-chip or micro total analysis systems. Microfluidics have huge application potential in biology, chemistry, and medicine, among other fields. Coupled with a suitable detection system, the detection and analysis of small-volume and low-concentration samples can be completed. This paper reviews an optical imaging system combined with microfluidics, including bright-field microscopy, chemiluminescence imaging, spectrum-based microscopy imaging, and fluorescence-based microscopy imaging. At the end of the article, we summarize the advantages and disadvantages of each imaging technology.

Metal enhanced chemiluminescence nanosensor for ultrasensitive bioassay based on silver nanoparticles modified functional DNA dendrimer

A novel metal enhanced chemiluminescence (MEC) nanosensor was developed for ultrasensitive biosensing and imaging, based on functional DNA dendrimer (FDD), proximity-dependent DNAzyme and silver nanoparticles (AgNPs). The FDD containing two split G-quadruplex structures was prepared through an enzyme-free and step-by-step assembly strategy, and then reacted with AgNPs and hemin molecules to form the FDD/hemin/AgNPs facilely. Such a MEC nanosensor consisted of three modules: FDD (scaffold), the generated G-quadruplex/hemin DNAzyme (signal reporter) and AgNPs (chemiluminescence enhancer). The MEC effect was achieved by controlling the length of DNA sequences between AgNPs on the periphery of FDD and DNAzymes inside it. Such nanosensor exhibited 9-fold amplification and another 6.4-fold metal enhancement in chemiluminescence intensity, which can be easily applied into trace detection of multiple protein markers using a disposable protein immunoarray. The FDD/hemin/AgNPs-based multiplex MEC imaging assay showed wide linear ranges over 5 orders of magnitude and detection limits down to 5× 10^-5 ng L^-1 and 1.8 × 10^-4 U mL^-1 for cardiac troponin T and carcinoma antigen 125, demonstrating a promising potential in application to protein analysis and clinical diagnosis. Moreover, the MEC nanosensor can be effectively delivered into cells with excellent biocompatibility and outstanding stability, offering a new tool for detection of intracellular targets and suggesting wide applications in bioassay.

Integration of 3D Hydrodynamic Focused Microreactor with Microfluidic Chemiluminescence Sensing for Online Synthesis and Catalytical Characterization of Gold Nanoparticles

Chemiluminescence assays have shown great advantages compared with other optical techniques. Gold nanoparticles have drawn much attention in chemiluminescence analysis systems as an enzyme-free catalyst. The catalytic activity of gold nanoparticles for chemiluminescence sensing depends on size, shape and the surface charge property, which is hard to characterize in batches. As there is no positive or negative correlation between chemiluminescence signals and sizes of gold nanoparticles, the best way to get optimal gold nanoparticles is to control the reaction conditions via online chemiluminescence sensing systems. Therefore, a new method was developed for online synthesis of gold nanoparticles with a three-dimension hydrodynamic focusing microreactor, directly coupled with a microfluidic chemiluminescence sensing chip, which was coupled to a charge-coupled device camera for direct catalytical characterization of gold nanoparticles. All operations were performed in an automatic way with a program controlled by Matlab. Gold nanoparticles were synthesized through a single-phase reaction using glucose as a reducing agent and stabilizer at room temperature. The property of gold nanoparticles was easily controlled with the three-dimension microreactor during synthesis. The catalyst property of synthesized gold nanoparticles was characterized in a luminol-NaOCl chemiluminescence system. After optimizing parameters of synthesis, the chemiluminescence signal was enhanced to a factor of 171. The gold nanoparticles synthesized under optimal conditions for the luminol-NaOCl system were stable for at least one month. To further investigate the catalytic activity of synthesized gold nanoparticles in various situations, two methods were used to change the property of gold nanoparticles. After adding a certain amount of salt (NaCl), gold nanoparticles aggregated with a changed surface charge property and the catalytic activity was greatly enhanced. Glutathione was used as an example of molecules with thiol groups which interact with gold nanoparticles and reduce the catalytic activity. The chemiluminescence intensity was reduced by 98.9%. Therefore, we could show that using a microreactor for gold nanoparticles synthesis and direct coupling with microfluidic chemiluminescence sensing offers a promising monitoring method to find the best synthesis condition of gold nanoparticles for catalytic activity.

Non-isolated sources of electromagnetic radiation by multipole decomposition for photonic quantum technologies on a chip with nanoscale apertures

The creation of single photon sources on a chip is a mid-term milestone on the road to chip-scale quantum computing. An in-depth understanding of the extended multipole decomposition of non-isolated sources of electromagnetic radiation is not only relevant for a microscopic description of fundamental phenomena, such as light propagation in a medium, but also for emerging applications such as single-photon sources. To design single photon emitters on a chip, we consider a ridge dielectric waveguide perturbed with a cylindrical inclusion. For this, we expanded classical multipole decomposition that allows simplifying and interpreting complex optical interactions in an intuitive manner to make it suitable for analyzing light-matter interactions with non-isolated objects that are parts of a larger network, e.g. individual components such as a single photon source of an optical chip. It is shown that our formalism can be used to design single photon sources on a chip.

Photonic hook formation in near-infrared with MXene Ti3C2 nanoparticles

MXenes, a recently developed class of 2D materials, have attracted considerable attention because of their graphene-like but highly tunable properties. It appears that the metallic properties of MXene titanium carbide are pronounced in near-infrared with well-defined localised surface plasmon resonance (LSPR). Here, we report on a curved photonic nanojet, known as the photonic hook, applied on a titanium carbide nanoparticle for the particle's optomechanical manipulation. We show that the optical forces generated and applied on titanium carbide nanoparticles of various shapes are based on the LSPR excitation in near-infrared. We compare the obtained results to traditional plasmonic gold nanoparticles which exhibit LSPR in visible. Considering the diversity of the MXene family, this study is a first step towards photonic devices that utilize optomechanical manipulation in near-infrared for biomedical research, optical trapping and others.

Tailored optical potentials for Cs atoms above waveguides with focusing dielectric nano-antenna

Tuning the near field using all-dielectric nano-antennas offers a promising approach for trapping atoms, which could enable strong single-atom-photon coupling. Here we report the numerical study of an optical trapping of a single Cs atom above a waveguide with a silicon nano-antenna, which produces a trapping potential for atoms in a chip-scale configuration. Using counter-propagating incident fields, bichromatically detuned from the atomic cesium D-lines, we numerically investigate the dependence of the optical potential on the nano-antenna geometry. We tailor the near-field potential landscape by tuning the evanescent field of the waveguide using a toroidal nano-antenna, a configuration that enables trapping of ultracold Cs atoms. Our research opens up a plethora of trapping atoms applications in a chip-scale manner, from quantum computing to quantum sensing, among others.

High-throughput chemiluminescence immunoassay based on Co2+/hemin synergistic catalysis for sensitive detection tetrabromobisphenol A bis(2-hydroxyethyl) ether in the environments

Here, a novel chemiluminescence (CL) immunoassay was fabricated for sensitive determination of tetrabromobisphenol A bis(2-hydroxyethyl) ether (TBBPA-DHEE), one of typical tetrabromobisphenol A derivatives. At the indirectly competitive method, the synthesized PS@hemin@Co²⁺ was labelled by secondary antibody (Ab₂) instead of common natural enzymes, which showed excellent catalysis towards the decomposition of luminol-H₂O₂ for producing CL signal. Furthermore, the CL signal was greatly amplified owing to the synergistic catalysis of hemin and Co²⁺ in the detection system. Under the optimized conditions, the established method offered (i) low detection limit (LOD, 0.9 μg/L), which was almost 5 times lower than that using a conventional ELISA with the same antibody; (ii) a good linearity (1.6-14.3 μg/L); (iii) satisfactory accuracy and precision (recoveries, 89.67-125.33%; CV, 2.75-8.37%). The proposed CL immunoassay was applied for analysis of environmental samples from various sources collected from Jiangsu and Zhejiang province, China. And the detected concentrations were ranged in 2.4-3.7 μg/L in environmental waters and 1.8-2.4 ng/g (dry weight, dw) in soil samples, indicating great potential for trace TBBPA-DHEE detection from environmental samples.

An assay for Staphylococcus aureus based on a self-catalytic ampicillin–metal (Fe3+)-organic gels–H2O2 chemiluminescence system with near-zero background noise

A self-catalytic ampicillin–metal (Fe³⁺)-organic gels (AMP–MOGs (Fe))–H₂O₂ CL system, which is not influenced by transition metal ions, was studied.

Two Hybrid Au-ZnO Heterostructures with Different Hierarchical Structures: Towards Highly Efficient Photocatalysts

A new paradigm for photocatalysts based on two different hierarchically structured honeycomb and porous cylindrical Au-ZnO heterostructures was successfully developed via a straightforward and cost-effective hydrothermal method under different preparation conditions, which can be promising for industrial applications. The photocatalytic performance of all as-prepared samples under the illumination of sunlight was evaluated by the photocatalytic degradation of rhodamine B (RhB) and malachite green (MG) aqueous solutions. The results show that the photocatalytic degradation efficiency of RhB and MG was 55.3% and 40.7% for ZnO, 95.3% and 93.4% for the porous cylindrical Au-ZnO heterostructure, and 98.6% and 99.5% for the honeycomb Au-ZnO heterostructure, respectively. Compared with those from the ZnO, the results herein demonstrate an excellent reduction in the photoluminescence and improvement in the photocatalysis for the Au-ZnO hybrids with different morphologies. These results were attributed not only to the greatly improved sunlight utilization efficiency due to the surface plasmon resonance (SPR) absorption of Au nanoparticles in the visible region coupled with the UV light utilization by the ZnO nanostructures and multi-reflections of the incident light in the pore structures of their interior cavities but also to the high charge separation efficiency and low Schottky barrier generated by the combination of Au nanoparticles and ZnO micromaterials. Moreover, the honeycomb Au-ZnO heterostructure had a high Au content, surface area and surface oxygen vacancy (O_V), which enabled photocatalytic properties that were higher than those of the porous cylindrical Au-ZnO heterostructures. In addition, two different formation mechanisms for the morphology and possible photocatalytic mechanisms are proposed in this paper.

Differential extinction of vibrational molecular overtone transitions with gold nanorods and its role in surface enhanced near-IR absorption (SENIRA)

Resonant coupling between plasmonic nanoantennas and molecular vibrational excitations is employed to amplify the weak overtone transitions that reside in the near-infrared. We explore for the first time the differential extinction of forbidden molecular overtone transitions coupled to the localized surface plasmons. We show a non-trivial interplay between the molecular absorption enhancement and suppression of plasmonic absorption in a coupled system. When the resonance conditions are met at 1.5 μm, two orders of magnitude enhancement of differential extinction as compared to the extinction of the same amount of free probe molecules is achieved. Our results pave a road toward a new class of surface enhanced near-infrared absorption-based sensors.

A Guanidine-Based Superbase as Efficient Chemiluminescence Booster

We introduce the guanidine-based superbase 1,5,7-triaza-bicyclo-[4.4.0]dec-5-ene (TBD) as efficient enabler for chemiluminescence (CL) based on luminol in a simple, ready-to-use two component system. The strong CL is generated by the superbase’s properties as peroxidase mimetic and bifunctional coreactant. The herein established concept allows for CL enabling molecules (superbases) to be readily implemented in larger molecular structures, including in polymers.

Pulse Duration and Wavelength Effects of Laser Ablation on the Oxidation, Hydrolysis, and Aging of Aluminum Nanoparticles in Water

We analyzed the formation of the aluminum (Al) nanoparticles (NPs) with triangular shape obtained by ablating Al bulk in liquid using pulses with different durations (5 ns, 200 ps, and 30 fs) and wavelengths (355 nm, 800 nm, and 1064 nm). We report three stages of synthesis and aging of Al NPs: Formation, transformation, and stable stage. The NPs prepared by different pulses are almost identical at the initial stage. The effects of duration and wavelength of the ablation pulses on the aging of NPs are revealed. Pulse duration is determined to be essential for morphological transformation of NPs, while pulse wavelength strongly influences particle sizes. NPs produced by ultra-short pulses have smaller sizes and narrow size distribution. We demonstrate that oxidation and hydrolysis of Al in water are the results of ablation for all pulse durations and wavelengths, which also strongly modify the preferable reaction path of NPs in water, thus affecting the composition and morphology of triangle NPs. The results of modeling of the NPs generation in water due to a 50 ps laser pulse interacting with a thick Al target are presented. Water-based effects in the formation of NPs, their evolution, and solidification are considered from the mechanical and thermophysical points of view. The detailed analysis of the modeling results allowed for determination of the main mechanism responsible for the ablation process followed by the NPs formation.

Broadband forward scattering from dielectric cubic nanoantenna in lossless media

Dielectric photonics platform provides unique possibilities to control light scattering via utilizing high-index dielectric nanoantennas with peculiar optical signatures. Despite the intensively growing field of all-dielectric nanophotonics, it is still unclear how surrounding media affect scattering properties of a nanoantenna with complex multipole response. Here, we report on light scattering by a silicon cubic nanoparticle embedded in lossless media, supporting optical resonant response. We show that significant changes in the scattering process are governed by the electro-magnetic multipole resonances, which experience spectral red-shift and broadening over the whole visible and near-infrared spectra as the indices of media increase. Most interestingly, the considered nanoantenna exhibits the broadband forward scattering in the visible and near-infrared spectral ranges due to the Kerker-effect in high-index media. The revealed effect of broadband forward scattering is essential for highly demanding applications in which the influence of the media is crucial such as health-care, e.g., sensing, treatment efficiency monitoring, and diagnostics. In addition, the insights from this study are expected to pave the way toward engineering the nanophotonic systems including but not limited to Huygens-metasurfaces in media within a single framework.

Milk haptoglobin detection based on enhanced chemiluminescence of gold nanoparticles

The suggested research specifically addresses the major source of economic loss of the dairy industry, the bovine mastitis (BM), an inflammatory disease of mammary gland caused by bacterial intramammary infection. During udder inflammation, the concentrations of acute phase proteins (APP) in both plasma and milk are escalated, which can be distinctively utilized as predicting diagnostic biomarkers of cattle's BM clinical status. Herein, we demonstrate a liquid-phase luminol chemiluminescence (CL) system for sensitive detection of haptoglobin (Hp), a predictive APP of BM, by utilizing the binding capacity of hemoglobin (Hb). The CL intensity is linearly proportional to Hb-Hp complex formation, resulting in peroxidase-like activity inhibition of luminol-H₂O₂-Hb CL system. Enhanced CL, at least 10-fold effect within real samples, is attained by the addition of catalytically active cross-linked gold nanoparticles (GNPs) onto the luminol-H₂O₂ solution. Moreover, the influence of different somatic cell counts (representing subclinical and clinical BM status) and pathogen types (i.e., CNS and Streptococcus dysgalactiae) on the secreted milk Hp levels obtained from Holstein cows are established. The analyzed Hp concentrations are in agreement with a commercial enzyme-linked immunosorbent assay kit. The proposed CL sensing concept offers cost-effective, simple, label-free and reliable systematic analysis of Hp biomarker for BM, potentially initiating a positive effect on animals' health and overall economy of the dairy farms.

Quenching of Luminol Fluorescence at Nano-Bio Interface: Towards the Development of an Efficient Energy Transfer System

Surface modified colloidal gold (Au) and silver (Ag) nanoparticles (NPs) were used as efficient quenchers of luminol (LH₂) fluorescence either in homogeneous aqueous medium or its noncovalent assembly with bovine serum albumin (BSA). The mechanism as well as the extent of fluorescence quenching was found to be strongly dependent on the nature of the nanoparticles. While simple static type fluorescence quenching mechanism was perceived with AuNP, a more complex protocol involving quenching sphere model was envisaged for AgNP quenching. Nevertheless, the magnitude of Stern-Volmer (SV) quenching constant (K_SV ~ 10⁸-10¹⁰ M^-1) was calculated to be ca. 10⁴ times more for surface quoted NPs in comparison with BSA-NP bioconjugates system. On the other hand, a highly efficient (E ≈ 95%) energy transfer (ET) process was predicted for LH₂ captured in the hydrophobic assembly with BSA in presence of AgNP as an acceptor. The ET efficiency is critically dependent on the concentration of BSA and nicely correlated with the extent of NP surface coverage. However, fluorescence quenching on AuNP surface is relatively less responsive towards protein concentration, primarily due to the difference in surface activity as well as the mode of interaction of the protein with NPs. Graphical Abstract Energy transfer from excited luminol to metal nanoparticles is strongly modulated in presence of serum albumins.

Synthesis and biophysical characteristics of riboflavin/HSA protein system on silver nanoparticles

Novel l‑Arginine‑Dextran70 based-silver nanoparticles (SNPs) (SNPs^Arg), functionalized with Riboflavin (RF) and Human Serum Albumin (HSA) were characterized by UV-Vis absorption, Transmission Electron Microscopy (TEM), Atomic Force Microscopy (AFM), fluorescence and circular dichroism spectroscopy, chemiluminescence and Neutral red assays. TEM analysis showed the formed faceted particles, large clumps/fused aggregates, nano-featured with the mean particle size of 41.60 nm. Chemiluminescence and Neutral red assays for in vitro antioxidant and cytotoxic activities of the SNPs^Arg/RF/HSA systems have been studied. It was pointed out that SNPs^Arg functionalized with RF and HSA resulted in a bio-nanosystem which leads to a high activity against oxygen free radicals, altered viability, morphology, apoptotic bodies and decreased cell density of L929 fibroblast cells. Results are relevant for understanding the redox properties of RF in the case of biological applications and especially for RF containing drugs.

Tailoring Blue-Green Double Emissions in Carbon Quantum Dots via Co-Doping Engineering by Competition Mechanism between Chlorine-Related States and Conjugated π-Domains

Representing single-layer to tens of layers of graphene in a size less than 30 nm, carbon quantum dots (CQDs) is becoming an advanced multifunctional material for its unique optical, electronic, spin and photoelectric properties induced by the quantum confinement effect and edge effect. In present work, upon co-doping engineering, nitrogen and chlorine co-doped CQDs with uniquely strong blue-green double emissions are developed via a facile and one-pot hydrothermal method. The crystalline and optical properties of CQDs have been well manipulated by tuning the mole ratio of nitrogen/chlorine and the reaction time. The characteristic green emission centered at 512 nm has been verified, originating from the chlorine-related states, the other blue emissions centered at 460 nm are attributed to the conjugated π-domain. Increasing the proportion of 1,2,4-benzentriamine dihydrochloride can effectively adjust the bandgap of CQDs, mainly caused by the synergy and competition of chlorine-related states and the conjugated π-domain. Prolonging the reaction time promotes more nitrogen and chlorine dopants incorporate into CQDs, which inhibits the growth of CQDs to reduce the average size of CQDs down to 1.5 nm, so that the quantum confinement effect dominates into play. This work not only provides a candidate with excellent optical properties for heteroatoms-doped carbon materials but also benefits to stimulate the intensive studies for co-doped carbon with chlorine as one of new dopants paradigm.

A Self-Contained Chemiluminescent Lateral Flow Assay for Point-of-Care Testing

Immunoassays whose readouts rely on chemiluminescence are increasingly useful for a broad range of analytical applications, but they are rarely made into point-of-care (POC) format because of the complex reagents required (some reagents have to be stored in low temperatures, and some reagents have to be freshly made right before the assay). This study reports a self-contained chemiluminescent lateral flow assay (CLFA), which prestores all necessary reagents. This CLFA contains three parts: the normal lateral flow assay (LFA) strip, the chemiluminescence substrate pad, and the polycarbonate (PC) holder. On the LFA strip, we simultaneously labeled horseradish peroxidase (HRP) and antibody on the gold nanoparticles (AuNPs) for the conjugate pad. For the substrate pad, we used sodium perborate as the oxidant and lyophilized the chemiluminescence substrate on the glass fiber, which allows long-term storage. After the transfer of substrate from the substrate pad to the nitrocellulose (NC) membrane, we captured the chemiluminescence signal for the quantification of the targets. The HRP on the AuNPs can amplify the chemiluminescence signal efficiently. We used this CLFA system to detect both macromolecules and small molecules successfully. This self-contained and easily processable device is exceedingly appropriate for rapid detection and is a convenient platform for POC testing.

PVP-coated gold nanoparticles for the selective determination of ochratoxin A via quenching fluorescence of the free aptamer

This paper describes an aptamer/gold nanoparticle-based assay for ochratoxin A (OTA) detection. This assay is based on the use of an aptamer labeled with carboxyfluorescein (FAM) at its 5'-end and gold nanoparticles (AuNPs) that act as quenchers of fluorescence. When OTA is absent in the system, the fluorescently labeled aptamers are adsorbed on the surface of AuNPs. The fluorescence signal of the fluorescein-labeled OTA aptamer generated is quenched by the fluorescence resonance energy transfer effect of AuNPs. When OTA is present in the system, the fluorescently labeled aptamer binds to OTA and forms a folded structure, which can resist the adsorption of AuNPs. Thus, the fluorescent signal can be retained. The detection limit of this sensing platform is 5 nM, and the linear detection range is 10-1000 nM (R2 = 0.994). The procedure was validated by the quantitation of OTA in spiked ginger powder samples and were found to be free of interference by the sample matrix. The recoveries and the relative standard deviation varied from 89.0% to 117.8% and from 1.9% to 6.3%, respectively.

Enhanced Catalytic Reduction of 4-Nitrophenol Driven by Fe₃O₄-Au Magnetic Nanocomposite Interface Engineering: From Facile Preparation to Recyclable Application

In this work, we report the enhanced catalytic reduction of 4-nitrophenol driven by Fe₃O₄-Au magnetic nanocomposite interface engineering. A facile solvothermal method is employed for Fe₃O₄ hollow microspheres and Fe₃O₄-Au magnetic nanocomposite synthesis via a seed deposition process. Complementary structural, chemical composition and valence state studies validate that the as-obtained samples are formed in a pure magnetite phase. A series of characterizations including conventional scanning/transmission electron microscopy (SEM/TEM), Mössbauer spectroscopy, magnetic testing and elemental mapping is conducted to unveil the structural and physical characteristics of the developed Fe₃O₄-Au magnetic nanocomposites. By adjusting the quantity of Au seeds coating on the polyethyleneimine-dithiocarbamates (PEI-DTC)-modified surfaces of Fe₃O₄ hollow microspheres, the correlation between the amount of Au seeds and the catalytic ability of Fe₃O₄-Au magnetic nanocomposites for 4-nitrophenol (4-NP) is investigated systematically. Importantly, bearing remarkable recyclable features, our developed Fe₃O₄-Au magnetic nanocomposites can be readily separated with a magnet. Such Fe₃O₄-Au magnetic nanocomposites shine the light on highly efficient catalysts for 4-NP reduction at the mass production level.

Highly Efficient, Low-Cost, and Magnetically Recoverable FePt⁻Ag Nanocatalysts: Towards Green Reduction of Organic Dyes

Nowadays, synthetic organic dyes and pigments discharged from numerous industries are causing unprecedentedly severe water environmental pollution, and conventional water treatment processes are hindered due to the corresponding sophisticated aromatic structures, hydrophilic nature, and high stability against light, temperature, etc. Herein, we report an efficient fabrication strategy to develop a new type of highly efficient, low-cost, and magnetically recoverable nanocatalyst, i.e., FePt⁻Ag nanocomposites, for the reduction of methyl orange (MO) and rhodamine B (RhB), by a facile seed deposition process. X-ray diffraction results elaborate that the as-synthesized FePt⁻Ag nanocomposites are pure disordered face-centered cubic phase. Transmission electron microscopy studies demonstrate that the amount of Ag seeds deposited onto the surfaces of FePt nanocrystals increases when increasing the additive amount of silver colloids. The linear correlation of the MO and RhB concentration versus reaction time catalyzed by FePt⁻Ag nanocatalysts is in line with pseudo-first-order kinetics. The reduction rate constants of MO and RhB increase with the increase of the amount of Ag seeds. FePt⁻Ag nanocomposites show good separation ability and reusability, and could be repeatedly applied for nearly complete reduction of MO and RhB for at least six successive cycles. Such cost-effective and recyclable nanocatalysts provide a new material family for use in environmental protection applications.

Chemi- and Bioluminescence of Cyclic Peroxides

Bioluminescence is a phenomenon that has fascinated mankind for centuries. Today the phenomenon and its sibling, chemiluminescence, have impacted society with a number of useful applications in fields like analytical chemistry and medicine, just to mention two. In this review, a molecular-orbital perspective is adopted to explain the chemistry behind chemiexcitation in both chemi- and bioluminescence. First, the uncatalyzed thermal dissociation of 1,2-dioxetane is presented and analyzed to explain, for example, the preference for triplet excited product states and increased yield with larger nonreactive substituents. The catalyzed fragmentation reaction and related details are then exemplified with substituted 1,2-dioxetanone species. In particular, the preference for singlet excited product states in that case is explained. The review also examines the diversity of specific solutions both in Nature and in artificial systems and the difficulties in identifying the emitting species and unraveling the color modulation process. The related subject of excited-state chemistry without light absorption is finally discussed. The content of this review should be an inspiration to human design of new molecular systems expressing unique light-emitting properties. An appendix describing the state-of-the-art experimental and theoretical methods used to study the phenomena serves as a complement.

Multifunctional microfluidic chip for optical nanoprobe based RNA detection - application to Chronic Myeloid Leukemia

Many diseases have their treatment options narrowed and end up being fatal if detected during later stages. As a consequence, point-of-care devices have an increasing importance for routine screening applications in the health sector due to their portability, fast analyses and decreased cost. For that purpose, a multifunctional chip was developed and tested using gold nanoprobes to perform RNA optical detection inside a microfluidic chip without the need of molecular amplification steps. As a proof-of-concept, this device was used for the rapid detection of chronic myeloid leukemia, a hemato-oncological disease that would benefit from early stage diagnostics and screening tests. The chip passively mixed target RNA from samples, gold nanoprobes and saline solution to infer a result from their final colorimetric properties. An optical fiber network was used to evaluate its transmitted spectra inside the chip. Trials provided accurate output results within 3 min, yielding signal-to-noise ratios up to 9 dB. When compared to actual state-of-art screening techniques of chronic myeloid leukemia, these results were, at microscale, at least 10 times faster than the reported detection methods for chronic myeloid leukemia. Concerning point-of-care applications, this work paves the way for other new and more complex versions of optical based genosensors.

Ultrasensitive detection of lysozyme in droplet-based microfluidic devices

Lysozyme (LYS) is a bacteriolytic enzyme, available in secretions such as saliva, tears and human milk. LYS is an important defence molecule of the innate immune system, and its overexpression can be a consequence of diseases such as leukemia, kidney disease and sarcoidosis. This paper reports on a digital microfluidic-based approach that combines the gold nanoparticle-enhanced chemiluminescence with aptamer interaction to detect human lysozyme into droplets 20 nanoliters in volume. The described method allows identifying LYS with a 44.6 femtomolar limit of detection, using sample volume as low as 1μL and detection time in the range of 10min. We used luminol to generate the chemiluminescence and demonstrated that the compartmentalization of LYS in droplets also comprising gold nanoparticles provided enhanced luminescence. We functionalized the gold nanoparticles with a thiolated aptamer to achieve the required selectivity that allowed us to detect LYS in human serum.

Invisibility Cloaking Scheme by Evanescent Fields Distortion on Composite Plasmonic Waveguides with Si Nano-Spacer

A new, composite plasmonic waveguide based electromagnetic cloaking scheme is proposed with Si nano-spacer. Here we show, that the scattering fields of an object located on the cloak do not interact with the evanescent field, resulting in object's invisibility. Finite difference time domain (FDTD) numerical calculations were performed to extract the modal distributions and surface intensities on a composite plasmonic waveguide with a metasurface overlayer. Spatially varying effective permittivity was analytically calculated using transformation optics. Cloaking was demonstrated for a cylindrical object with diameter of 70% from the waveguide width on a high index ridge waveguide structure with silicon nitride guiding layer on silica substrate. Our results open the door to new integrated photonic devices, harnessing from evanescent fields distortion on composite plasmonic waveguides and dielectric nano-spacers for the variety of applications from on-chip optical devices to all-optical processing.

Simultaneous enhancement of photo- and electroluminescence in white organic light-emitting devices by localized surface plasmons of silver nanoclusters

White organic light-emitting devices (WOLEDs) with enhanced current efficiency and negligible color shifting equipped with an internal color conversion layer (CCL) were fabricated. They were attained by embedding a single layer of silver nanoclusters (SNCs) between the CCL and light-emitting layer (EML). The simultaneous enhancement of the photoluminescence (PL) of the CCL and electroluminescence (EL) of the EML were realized by controlling the thickness and size of the SNCs to match the localized surface plasmon resonance spectrum with the PL spectrum of the CCL and the EL spectrum of the EML. The WOLED with optimal SNCs demonstrated a 25.81% enhancement in current efficiency at 60 mA cm^-2 and good color stability over the entire range of current density.