Enhanced percolation and gene expression in tumor hypoxia by PEGylated polyplex micelles

Nanoparticles for vaccine and gene therapy: Overcoming the barriers to nucleic acid delivery

Nucleic acid therapeutics can be used to control virtually every aspect of cell behavior and therefore have significant potential to treat genetic disorders, infectious diseases, and cancer. However, while clinically approved to treat a small number of diseases, the full potential of nucleic acid therapeutics is hampered by inefficient delivery. Nucleic acids are large, highly charged biomolecules that are sensitive to degradation and so the approaches to deliver these molecules differ significantly from traditional small molecule drugs. Current studies suggest less than 1% of the injected nucleic acid dose is delivered to the target cell in an active form. This inefficient delivery increases costs and limits their use to applications where a small amount of nucleic acid is sufficient. In this review, we focus on two of the major barriers to efficient nucleic acid delivery: (1) delivery to the target cell and (2) transport to the subcellular compartment where the nucleic acids are therapeutically active. We explore how nanoparticles can be modified with targeting ligands to increase accumulation in specific cells, and how the composition of the nanoparticle can be engineered to manipulate or disrupt cellular membranes and facilitate delivery to the optimal subcellular compartments. Finally, we highlight how with intelligent material design, nanoparticle delivery systems have been developed to deliver nucleic acids that silence aberrant genes, correct genetic mutations, and act as both therapeutic and prophylactic vaccines. This article is categorized under: Nanotechnology Approaches to Biology > Cells at the Nanoscale Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Biology-Inspired Nanomaterials > Lipid-Based Structures.

Co-encapsulation of Cas9 mRNA and guide RNA in polyplex micelles enables genome editing in mouse brain

Genome editing using CRISPR/Cas9 has attracted considerable attention for the treatment of genetic disorders and viral infections. Co-delivery of Cas9 mRNA and single guide (sg)RNA is a promising strategy to efficiently edit the genome of various cell types, including non-dividing cells, with minimal safety concerns. However, co-delivery of two RNA species with significantly different sizes, such as Cas9 mRNA (4.5 kb) and sgRNA (0.1 kb), is still challenging, especially in vivo. Here, we addressed this issue by using a PEGylated polyplex micelle (PM) condensing the RNA in its core. PM loading sgRNA alone released sgRNA at minimal dilution in buffer, while PM loading Cas9 mRNA alone was stable even at higher dilutions. Interestingly, co-encapsulating sgRNA with Cas9 mRNA in a single PM prevented sgRNA release upon dilution, which led to the enhanced tolerability of sgRNA against enzymatic degradation. Subsequently, PM with co-encapsulated RNA widely induced genome editing in parenchymal cells in the mouse brain, including neurons, astrocytes, and microglia, following intraparenchymal injection, at higher efficiency than that by co-delivery of PMs loaded with either Cas9 mRNA or sgRNA separately. To the best of our knowledge, this is the first report demonstrating the utility of RNA-based delivery of CRISPR/Cas9 in inducing genome editing in the brain parenchymal cells. Furthermore, the efficiency of genome editing using PMs was higher than using a non-PEGylated polyplex, due to the enhanced diffusion of PMs in the brain tissue. The results reported herein demonstrate the potential of using PMs to co-encapsulate Cas9 mRNA and sgRNA for in vivo genome editing.

Core-Cross-linked Fluorescent Worm-Like Micelles for Glucose-Mediated Drug Delivery

We herein report the fabrication of core-crosslinked, fluorescent, and surface-functionalized worm-like block copolymer micelles as drug delivery vehicles. The polyether-based diblock terpolymer [allyl-poly(ethylene oxide)-block-poly(2-ethylhexyl glycidyl ether-co-furfuryl glycidyl ether)] was synthesized via anionic ring opening polymerization, and self-assembly in water as a selective solvent led to the formation of long filomicelles. Subsequent cross-linking was realized using hydrophobic bismaleimides as well as a designed fluorescent cross-linker for thermally induced Diels-Alder reactions with the furfuryl units incorporated in the hydrophobic block of the diblock terpolymer. As a fluorescent cross-linker, we synthesized and incorporated a cyanine 5-based bismaleimide in the cross-linking process, which can be used for fluorescence tracking of the particles. Furthermore, we covalently attached glucose to the allyl end groups present on the surface of the micelles to investigate active glucose-mediated transport into suitable cell lines. First studies in 2D as well as 3D cell culture models suggest a glucose-dependent uptake of the particles into cells despite their unusually large size compared to other nanoparticle systems used in drug delivery.

Characterization of Triple-Negative Breast Cancer MDA-MB-231 Cell Spheroid Model

Background

The tumor three-dimensional (3D) spheroid model in vitro is effective on detecting malignant cells and tumorigenesis, and assessing drug resistance. Compared with two-dimensional (2D) monolayer culture, breast cancer (BC) spheroids more accurately reflect the complex microenvironment in vivo, which have been extensively reported in BC research. MDA-MB-231 cells, the triple-negative breast cancer (TNBC) cell line, display representative epithelial to mesenchymal transition (EMT) associated with BC metastasis. However, the characterization of MDA-MB-231 spheroids has been largely unknown at present, which requires further attention.

Materials and Methods

Microwell array was conducted for the formation of MDA-MB-231 spheroids. In addition, H&E staining, immunohistochemistry (IHC), CellTiter-Glo^® 3D cell viability assay, and flow cytometry were performed to investigate the structure and growth characteristics. Besides, Transwell and scratch healing assays were carried out to detect the migratory capacities compared with 2D culture. Western blotting and confocal fluorescence were selected to detect the expression of EMT-associated proteins. Additionally, the half maximal inhibitory concentration (IC₅₀) values of antitumor compounds Carboplatin and Doxorubicin were measured to assess drug resistance.

Results

The MDA-MB-231 spheroids were viable, which maintained a compact structure with zonation features for up to 9 days. Moreover, those spheroids had a slower growth rate than those cultured as a monolayer and differential zones of proliferation. The migratory capacities were significantly enhanced by transferring the spheroids to 2D adherent culture. Compared with 2D culture, the levels of EMT-associated proteins were significantly up-regulated in spheroids. Furthermore, toxicity assessment showed that spheroids exhibited an increased resistance to the antitumor compounds.

Conclusion

This study develops the simple spheroids and demonstrates their structure, growth and proliferation characteristics. According to our results, the spheroids are associated with superior EMT and high resistance to toxicological response compared with the standard 2D monocultures.

Multicellular Tumor Spheroids (MCTS) as a 3D In Vitro Evaluation Tool of Nanoparticles

Multicellular tumor spheroid models (MCTS) are often coined as 3D in vitro models that can mimic the microenvironment of tissues. MCTS have gained increasing interest in the nano-biotechnology field as they can provide easily accessible information on the performance of nanoparticles without using animal models. Considering that many countries have put restrictions on animals testing, which will only tighten in the future as seen by the recent developments in the Netherlands, 3D models will become an even more valuable tool. Here, an overview on MCTS is provided, focusing on their use in cancer research as most nanoparticles are tested in MCTS for treatment of primary tumors. Thereafter, various types of nanoparticles-from self-assembled block copolymers to inorganic nanoparticles, are discussed. A range of physicochemical parameters including the size, shape, surface chemistry, ligands attachment, stability, and stiffness are found to influence nanoparticles in MCTS. Some of these studies are complemented by animal studies confirming that lessons from MCTS can in part predict the behaviour in vivo. In summary, MCTS are suitable models to gain additional information on nanoparticles. While not being able to replace in vivo studies, they can bridge the gap between traditional 2D in vitro studies and in vivo models.

Enhanced targeting of invasive glioblastoma cells by peptide-functionalized gold nanorods in hydrogel-based 3D cultures

Cancer stem cells (CSCs) are responsible for drug resistance, tumor recurrence, and metastasis in several cancer types, making their eradication a primary objective in cancer therapy. Glioblastoma Multiforme (GBM) tumors are usually composed of a highly infiltrating CSC subpopulation, which has Nestin as a putative marker. Since the majority of these infiltrating cells are able to elude conventional therapies, we have developed gold nanorods (AuNRs) functionalized with an engineered peptide capable of specific recognition and selective eradication of Nestin positive infiltrating GBM-CSCs. These AuNRs generate heat when irradiated by a near-infrared laser, and cause localized cell damage. Nanoparticle internalization assays performed with GBM-CSCs or Nestin negative cells cultured as two-dimensional (2D) monolayers or embedded in three-dimensional (3D) biodegradable-hydrogels of tunable mechanical properties, revealed that the AuNRs were mainly internalized by GBM-CSCs, and not by Nestin negative cells. The AuNRs were taken up via energy-dependent and caveolae-mediated endocytic mechanisms, and were localized inside endosomes. Photothermal treatments resulted in the selective elimination of GBM-CSCs through cell apoptosis, while Nestin negative cells remained viable. Results also indicated that GBM-CSCs embedded in hydrogels were more resistant to AuNR photothermal treatments than when cultured as 2D monolayers. In summary, the combination of our engineered AuNRs with our tunable hydrogel system has shown the potential to provide an in vitro platform for the evaluation and screening of AuNR-based cancer therapeutics, leading to a substantial advancement in the application of AuNRs for targeted GBM-CSC therapy.

STATEMENT OF SIGNIFICANCE

There is an urgent need for reliable and efficient therapies for the treatment of Glioblastoma Multiforme (GBM), which is currently an untreatable brain tumor form with a very poor patient survival rate. GBM tumors are mostly comprised of cancer stem cells (CSCs), which are responsible for tumor reoccurrence and therapy resistance. We have developed gold nanorods functionalized with an engineered peptide capable of selective recognition and eradication of GBM-CSCs via heat generation by nanorods upon NIR irradiation. An in vitro evaluation of nanorod therapeutic activities was performed in 3D synthetic-biodegradable hydrogel models with distinct biomechanical cues, and compared to 2D cultures. Results indicated that cells cultured in 3D were more resistant to photothermolysis than in 2D systems.

Advances in multicellular spheroids formation

Three-dimensional multicellular spheroids (MCSs) have a complex architectural structure, dynamic cell-cell/cell-matrix interactions and bio-mimicking in vivo microenvironment. As a fundamental building block for tissue reconstruction, MCSs have emerged as a powerful tool to narrow down the gap between the in vitro and in vivo model. In this review paper, we discussed the structure and biology of MCSs and detailed fabricating methods. Among these methods, the approach in microfluidics with hydrogel support for MCS formation is promising because it allows essential cell-cell/cell-matrix interactions in a confined space.

Investigation on the controlled synthesis and post-modification of poly-[(N-2-hydroxyethyl)-aspartamide]-based polymers

We report the controlled synthesis of PHEA-based polymers and enhanced the post-modification reactivity by reducing the intramolecular hydrogen bonding.

Glycolysis inhibition as a cancer treatment and its role in an anti-tumour immune response

Increased glycolysis is the main source of energy supply in cancer cells that use this metabolic pathway for ATP generation. Altered energy metabolism is a biochemical fingerprint of cancer cells that represents one of the "hallmarks of cancer". The immune system can prevent tumour growth by eliminating cancer cells but this editing process ultimately results in poorly immunogenic cells remaining allowing for unchallenged tumour growth. In this review we look at the glycolysis pathway as a target for cancer treatments. We also examine the interplay between the glycolysis modulation and the immune response as an anti-cancer therapy.

Gene transfection to spheroid culture system on micropatterned culture plate by polyplex nanomicelle: a novel platform of genetically-modified cell transplantation

Three-dimensional (3D) cellular spheroids have attracted much attention as a transplantation procedure because the increased cell-to-cell interaction in spheroids enhances cell survival and its functions after the transplantation into the body. Furthermore, the potency of spheroidal cells may be further improved by introducing transgenes to augment cellular functions as well as enhance the paracrine effects by secreting key proteins involved in the essential cellular signaling cascades. In this study, we organized a new platform for genetically-modified cell transplantation by combining a microfabricated culture system for 3D spheroid formation with a newly developed non-viral transfection system, polyplex nanomicelle. After transfection of Gaussia luciferase using the nanomicelle, the prolonged luciferase expression was obtained for more than a month with continuous albumin secretion from the hepatocyte spheroids to the level comparable with control spheroids receiving no transfection. In contrast, by the transfection using FuGENE HD, a commercially available lipid-based reagent, the luciferase expression was obtained, yet the albumin secretion was significantly decreased with disintegration of the spheroid architecture. To assess the feasibility of the hepatocyte spheroids for in vivo transplantation, the spheroids were recovered by the use of micropatterned culture plate functionalized with thermosensitive polymer and dispersed into Matrigel(TM) Matrix. The luciferase expression as well as albumin secretion was maintained for more than a month from the spheroids in the Matrix. Thus, the combination of spheroid cell culture on micropatterned plates with gene introduction using polyplex nanomicelle is a promising platform for genetically-modified cell transplantation to achieve sustained transgene expression with maintaining innate cell functions.

The effect of co-delivery of paclitaxel and curcumin by transferrin-targeted PEG-PE-based mixed micelles on resistant ovarian cancer in 3-D spheroids and in vivo tumors

Multicellular 3D cancer cell culture (spheroids) resemble to in vivo tumors in terms of shape, cell morphology, growth kinetics, gene expression and drug response. However, these characteristics cause very limited drug penetration into deeper parts of the spheroids. In this study, we used multi drug resistant (MDR) ovarian cancer cell spheroid and in vivo tumor models to evaluate the co-delivery of paclitaxel (PCL) and a potent NF-κB inhibitor curcumin (CUR). PCL and CUR were co-loaded into the polyethylene glycol-phosphatidyl ethanolamine (PEG-PE) based polymeric micelles modified with transferrin (TF) as the targeting ligand. Cytotoxicity, cellular association and accumulation into the deeper layers were investigated in the spheroids and compared with the monolayer cell culture. Comparing to non-targeted micelles, flow cytometry and confocal imaging proved significantly deeper and higher micelle penetration into the spheroids with TF-targeting. Both in monolayers and in spheroids, PCL cytotoxicity was significantly increased when co-delivered with CUR in non-targeted micelles or as single agent in TF-targeted micelles, whereas TF-modification of co-loaded micelles did not further enhance the cytotoxicity. In vivo tumor inhibition studies showed good correlation with the 3D cell culture experiments, which suggests the current spheroid model can be used as an intermediate model for the evaluation of co-delivery of anticancer compounds in targeted micelles.

Nanodevices for studying nano-pathophysiology

Nano-scaled devices are a promising platform for specific detection of pathological targets, facilitating the analysis of biological tissues in real-time, while improving the diagnostic approaches and the efficacy of therapies. Herein, we review nanodevice approaches, including liposomes, nanoparticles and polymeric nanoassemblies, such as polymeric micelles and vesicles, which can precisely control their structure and functions for specifically interacting with cells and tissues. These systems have been successfully used for the selective delivery of reporter and therapeutic agents to specific tissues with controlled cellular and subcellular targeting of biomolecules and programmed operation inside the body, suggesting a high potential for developing the analysis for nano-pathophysiology.

A hydrogel-based tumor model for the evaluation of nanoparticle-based cancer therapeutics

Three-dimensional (3D) tissue-engineered tumor models have the potential to bridge the gap between monolayer cultures and patient-derived xenografts for the testing of nanoparticle (NP)-based cancer therapeutics. In this study, a hydrogel-derived prostate cancer (PCa) model was developed for the in vitro evaluation of doxorubicin (Dox)-loaded polymer NPs (Dox-NPs). The hydrogels were synthesized using chemically modified hyaluronic acid (HA) carrying acrylate groups (HA-AC) or reactive thiols (HA-SH). The crosslinked hydrogel networks exhibited an estimated pore size of 70-100 nm, similar to the spacing of the extracellular matrices (ECM) surrounding tumor tissues. LNCaP PCa cells entrapped in the HA matrices formed distinct tumor-like multicellular aggregates with an average diameter of 50 μm after 7 days of culture. Compared to cells grown on two-dimensional (2D) tissue culture plates, cells from the engineered tumoroids expressed significantly higher levels of multidrug resistance (MDR) proteins, including multidrug resistance protein 1 (MRP1) and lung resistance-related protein (LRP), both at the mRNA and the protein levels. Separately, Dox-NPs with an average diameter of 54 ± 1 nm were prepared from amphiphilic block copolymers based on poly(ethylene glycol) (PEG) and poly(ε-caprolactone) (PCL) bearing pendant cyclic ketals. Dox-NPs were able to diffuse through the hydrogel matrices, penetrate into the tumoroid and be internalized by LNCaP PCa cells through caveolae-mediated endocytosis and macropinocytosis pathways. Compared to 2D cultures, LNCaP PCa cells cultured as multicellular aggregates in HA hydrogel were more resistant to Dox and Dox-NPs treatments. Moreover, the NP-based Dox formulation could bypass the drug efflux function of MRP1, thereby partially reversing the resistance to free Dox in 3D cultures. Overall, the engineered tumor model has the potential to provide predictable results on the efficacy of NP-based cancer therapeutics.

Protein transfection study using multicellular tumor spheroids of human hepatoma Huh-7 cells

Several protein transfection reagents are commercially available and are powerful tools for elucidating function of a protein in a cell. Here we described protein transfection studies of the commercially available reagents, Pro-DeliverIN, Xfect, and TuboFect, using Huh-7 multicellular tumor spheroid (MCTS) as a three-dimensional in vitro tumor model. A cellular uptake study using specific endocytosis inhibitors revealed that each reagent was internalized into Huh-7 MCTS by different mechanisms, which were the same as monolayer cultured Huh-7 cells. A certain amount of Pro-DeliverIN and Xfect was uptaken by Huh-7 cells through caveolae-mediated endocytosis, which may lead to transcytosis through the surface-first layered cells of MCTS. The results presented here will help in the choice and use of protein transfection reagents for evaluating anti-tumor therapeutic proteins against MCTS models.

Multicellular tumor spheroids for evaluation of cytotoxicity and tumor growth inhibitory effects of nanomedicines in vitro: a comparison of docetaxel-loaded block copolymer micelles and Taxotere®

While 3-D tissue models have received increasing attention over the past several decades in the development of traditional anti-cancer therapies, their potential application for the evaluation of advanced drug delivery systems such as nanomedicines has been largely overlooked. In particular, new insight into drug resistance associated with the 3-D tumor microenvironment has called into question the validity of 2-D models for prediction of in vivo anti-tumor activity. In this work, a series of complementary assays was established for evaluating the in vitro efficacy of docetaxel (DTX) -loaded block copolymer micelles (BCM+DTX) and Taxotere® in 3-D multicellular tumor spheroid (MCTS) cultures. Spheroids were found to be significantly more resistant to treatment than monolayer cultures in a cell line dependent manner. Limitations in treatment efficacy were attributed to mechanisms of resistance associated with properties of the spheroid microenvironment. DTX-loaded micelles demonstrated greater therapeutic effect in both monolayer and spheroid cultures in comparison to Taxotere®. Overall, this work demonstrates the use of spheroids as a viable platform for the evaluation of nanomedicines in conditions which more closely reflect the in vivo tumor microenvironment relative to traditional monolayer cultures. By adaptation of traditional cell-based assays, spheroids have the potential to serve as intermediaries between traditional in vitro and in vivo models for high-throughput assessment of therapeutic candidates.

Update on non-viral delivery methods for cancer therapy: possibilities of a drug delivery system with anticancer activities beyond delivery as a new therapeutic tool

IMPORTANCE OF THE FIELD

Cancer is the most formidable human disease. Owing to the heterogeneity of cancer, a single-treatment modality is insufficient for the complete elimination of cancer cells. Therapeutic strategies from various aspects are needed for cancer therapy. These therapeutic agents should be carefully selected to enhance multiple therapeutic pathways. Non-viral delivery methods have been utilized to enhance the tumor-selective delivery of therapeutic molecules, including proteins, synthetic oligonucleotides, small compounds and genes.

AREAS COVERED IN THIS REVIEW

As non-viral delivery methods, liposomes and polymer-based delivery materials to target tumors mainly by systemic delivery, physical methods including electroporation, sonoporation, and so on, to locally inject therapeutic molecules, and virosomes to use the viral infectious machinery for the delivery of therapeutic molecules are summarized.

WHAT THE READER WILL GAIN

This article aims to provide an overview of the characteristic properties of each non-viral vector. It will be beneficial to utilize appropriately the vector for cancer treatment.

TAKE HOME MESSAGE

Efficient and minimally invasive vectors are generally considered to be the ideal drug delivery system (DDS). However, against cancer, DDS equipped with antitumor activities may be a therapeutic choice. By combining therapeutic molecules with DDS having antitumor activities, enhancement of the multiple therapeutic pathways may be achieved.

The delivery of doxorubicin to 3-D multicellular spheroids and tumors in a murine xenograft model using tumor-penetrating triblock polymeric micelles

Doxorubicin (DOX) is an effective chemotherapeutic against a wide range of solid tumors. However, its clinical use is limited by severe side effects such as cardiotoxicity as well as inherent and acquired drug resistance of tumors. DOX encapsulation within self-assembled polymeric micelles has the potential to decrease the systemic distribution of free drug and enhance the drug accumulation in the tumor via the enhanced permeability and retention (EPR). In this study, DOX was encapsulated in micelles composed of poly (ethylene oxide)-poly [(R)-3-hydroxybutyrate]-poly (ethylene oxide) (PEO-PHB-PEO) triblock copolymers. Micelle size, DOX loading and DOX release were characterized. To evaluate DOX activity, micelles were tested in both monolayer cell cultures and three-dimensional (3-D) multicellular spheroids (MCS) that mimic solid tumors. Antitumor activity in vivo was further studied with tumor-bearing mice. The micelles improved the efficiency of Dox penetration in 3-D MCS compared with free DOX. Efficient cell killing by Dox-micelles in both monolayer cells and 3-D MCS was also demonstrated. Finally, DOX-loaded micelles mediate efficient tumor delivery from tail vein injections to tumor-bearing mice with much less toxicity compared with free DOX.

Structure-activity relationships of cationic shell-crosslinked knedel-like nanoparticles: shell composition and transfection efficiency/cytotoxicity

Cationic nanoparticles are a promising class of transfection agents for oligonucleotide and gene delivery, but vary greatly in their effectiveness and cytotoxicity. Recently, we developed a new class of cationic transfection agents based on cationic shell-crosslinked knedel-like nanoparticles (cSCKs) that efficiently transfect mammalian cells with both oligonucleotides and plasmid DNA. In an effort to further improve transfection efficiency without increasing cytotoxicity, we examined the effects of the composition of primary amine (pa), tertiary amine (ta) and carboxylic acid (ca) groups in the shell of these nanoparticles. A series of discrete complexes of the cSCKs with plasmid DNA (pDNA) or phosphorothioate 2'-OMe oliogonucleotides (ps-MeON) were prepared over a broad range of amine to phosphate ratios (N/P ratio) of 4:1-40:1. The sizes of the complexes and the ability of the nanoparticles to completely bind ODNs were found to depend on the cSCK amine to DNA phosphate (N/P) ratio and the cSCK buffering capacity. The cSCKs were then evaluated for their ability to transfect cells with plasmid DNA by monitoring fluorescence from an encoded EGFP, and for delivery of ps-MeON by monitoring luminescence from luciferase resulting from ps-MeON-mediated splicing correction. Whereas the cationic cSCK-pa(25)-ta(75) was found to be best for transfecting plasmid DNA into HeLa cells at an N/P ratio of 20:1, cSCK-pa(50)-ta(50), at an N/P ratio 10:1 was best for ps-MeON delivery. We also found that increasing the proportion of tertiary relative to primary amine reduced the cytotoxicity. These results demonstrate that a dramatic improvement in gene and oligonucleotide delivery efficiency with decreased cytotoxicity in HeLa cells can be achieved by incorporation of tertiary amines into the shells of cSCKs.

Balancing protection and release of DNA: tools to address a bottleneck of non-viral gene delivery

Engineering polymeric gene-delivery vectors to release an intact DNA payload at the optimal time and subcellular compartment remains a formidable challenge. An ideal vector would provide total protection of complexed DNA from degradation prior to releasing it efficiently near or within the nucleus of a target cell. While optimization of polymer properties, such as molecular weight and charge density, has proved largely inadequate in addressing this challenge, applying polymeric carriers that respond to temperature, light, pH and redox environment to trigger a switch from a tight, protective complex to a more relaxed interaction favouring release at the appropriate time and place has shown promise. Currently, a paucity of gene carriers able to satisfy the contrary requirements of adequate DNA protection and efficient release contributes to the slow progression of non-viral gene therapy towards clinical translation. This review highlights the promising carrier designs that may achieve an optimal balance of DNA protection and release. It also discusses the imaging techniques and three-dimensional in vitro models that can help study these two barriers in the non-viral gene transfer process. Ultimately, efficacious non-viral gene therapy will depend on the combination of intelligent material design, innovative imaging techniques and sophisticated in vitro model systems to facilitate the rational design of polymeric gene-delivery vectors.