Extreme compressibility in LnFe(CN)6 coordination framework materials via molecular gears and torsion springs

Enhanced elastic stability of a topologically disordered crystalline metal-organic framework

By virtue of their open network structures and low densities, metal-organic frameworks (MOFs) are soft materials that exhibit elastic instabilities at low applied stresses. The conventional strategy for improving elastic stability is to increase the connectivity of the underlying MOF network, which necessarily increases the material density and reduces the porosity. Here we demonstrate an alternative paradigm, whereby elastic stability is enhanced in a MOF with an aperiodic network topology. We use a combination of variable-pressure single-crystal X-ray diffraction measurements and coarse-grained lattice-dynamical calculations to interrogate the high-pressure behaviour of the topologically aperiodic system TRUMOF-1, which we compare against that of its ordered congener MOF-5. We show that the topology of the former quenches the elastic instability responsible for pressure-induced framework collapse in the latter, much as irregularity in the shapes and sizes of stones acts to prevent cooperative mechanical failure in drystone walls. Our results establish aperiodicity as a counter-intuitive design motif in engineering the mechanical properties of framework structures that is relevant to MOFs and larger-scale architectures alike.

Prussian Blue Analogue Glasses for Photoinduced CO2 Conversion

Crystal-to-glass transformation is a powerful approach to modulating the chemical and physical properties of crystals. Here we demonstrate that the glass transformation of cobalt hexacyanoferrate crystals, one of the Prussian blue analogues, increased the concentration of open metal sites and altered the electronic state while maintaining coordination geometries and short-range ordering in the structure. The compositional and structural changes were characterized by X-ray absorption fine structure, energy dispersive X-ray spectroscopy, and X-ray total scattering. The changes contribute to the flat band potential of the glass becoming closer to the redox potential of CO2 reduction. The valence band energy of the glass also shifts, resulting in lower band gap energy. Both the increased open metal sites and the optimal electronic structure upon vitrification enhance photocatalytic activity toward CO2-to-CO conversions (9.9 μmol h-1 CO production) and selectivity (72.4%) in comparison with the crystalline counterpart (3.9 μmol h-1 and 42.8%).

Hydrogen-bond-modulated negative linear compressibility in a V-shaped molecular crystal

A material with the "hidden" negative linear compressibility (NLC) will expand along a specific crystal direction upon uniformly compression to a critical pressure; such materials are thought to be promising candidates for non-linear actuators, switches and sensors. Herein, we use density functional theory (DFT) calculations to uncover the hidden NLC in a V-shaped molecular crystal, bis(5-amino-1,2,4-triazol-3-yl)methane (BATZM). The calculations indicate that the crystal is normally compressed over the pressure range of 0-3 GPa while it expands along the b-axis when the external hydrostatic pressure exceeds 3 GPa. The compressive behavior of the BATZM crystal is modulated by inter-molecular hydrogen bonds, which act as highly compressible springs at low pressures but robust struts at high pressures. Hence, the crystal prefers to compress the hydrogen bonds coupled with PLC at first and flatten the molecules, coupled with later NLC to resist the increasing external pressure. The compressive behavior of BATZM provides a strategy to design more hidden NLC materials via the rational use of the hydrogen bonds.

Assembly of dysprosium(III) cubanes in a metal-organic framework with an ecu topology and slow magnetic relaxation

A dysprosium(III) metal-organic framework constructed using dysprosium(III) cubanes as secondary building units has been reported to exhibit field-induced slow magnetic relaxation behavior and an unprecedented ecu topology, which is the first example of an 8-connected Ln-cubane-based framework material and a rare Dy4-MOF showing slow magnetic relaxation.

Unexpected giant negative area compressibility in palladium diselenide

Negative area compressibility (NAC) is a counterintuitive 'squeeze-expand' behavior in solids that is very rare but attractive due to possible pressure-response applications and coupling with rich physicochemical properties. Herein, NAC behavior is reported in palladium diselenide with a large magnitude and wide pressure range. We discover that, apart from the rigid flattening of layers that has been generally recognized, the unexpected giant NAC effect in PdSe2 largely comes from anomalous elongation of intralayer chemical bonds. Both structural variations are driven by intralayer-to-interlayer charge transfer with enhanced interlayer interactions under pressure. Our work updates the mechanical understanding of this anomaly and establishes a new guideline to explore novel compression-induced properties.

Constructing 3D flower-like LaFe bimetal oxides with abundant mesoporous and controllable active sites for high-efficient phosphorus removal: Synthesis, mechanism, and application

The design of high-performance porous adsorbents for phosphorus removal is a persistently hot topic to maintain a sustainable aquatic ecosystem. In the present study, a self-templating strategy using LaFe cyanometallates (CMs) as precursors was adopted to prepare porous LaFe bimetal oxides with optimizable structure and composition for phosphate adsorption. The results showed that a high supplied La^III/Fe^II ratio enabled an adequate coordination polymerization in the preparation of LaFe CM precursor and led to a striking three-dimensional (3D) structure of "twin lotus flower" with high coordinated water content, which resulted in a 3D flower-like LaFe oxide with high surface area and high porosity (mainly in mesopore). The LaFe oxide of LaFe15T possessing the optimal La/Fe ratio (1.5: 1) exhibited the most superior performance of phosphate adsorption, where La was confirmed to be the main active site for phosphate capture via ligand exchange mechanism. The batch and column tests of phosphate adsorption showed that the 3D flower-like LaFe oxides are effective adsorbents for phosphate removal. Therefore, the structure optimization in the template preparation stage is an effective strategy to design porous LaFe bimetal oxides as high-performance phosphorus removal materials.

Lanthanide Hexacyanidoruthenate Frameworks for Multicolor to White-Light Emission Realized by the Combination of d-d, d-f, and f-f Electronic Transitions

We report an effective strategy toward tunable room-temperature multicolor to white-light emission realized by mixing three different lanthanide ions (Sm³⁺, Tb³⁺, and Ce³⁺) in three-dimensional (3D) coordination frameworks based on hexacyanidoruthenate(II) metalloligands. Mono-lanthanide compounds, K{Ln^III(H₂O)_n[Ru^II(CN)₆]}·mH₂O (1, Ln = La, n = 3, m = 1.2; 2, Ln = Ce, n = 3, m = 1.3; 3, Ln = Sm, n = 2, m = 2.4; 4, Ln = Tb, n = 2, m = 2.4) are 3D cyanido-bridged networks based on the Ln-NC-Ru linkages, with cavities occupied by K⁺ ions and water molecules. They crystallize differently for larger (1, 2) and smaller (3, 4) lanthanides, in the hexagonal P6₃/m or the orthorhombic Cmcm space groups, respectively. All exhibit luminescence under the UV excitation, including weak blue emission in 1 due to the d-d ³T_1g → ¹A_1g electronic transition of Ru^II, as well as much stronger blue emission in 2 related to the d-f ²D_3/2 → ²F_5/2,7/2 transitions of Ce^III, red emission in 3 due to the f-f ⁴G_5/2 → ⁶H_{5/2,7/2,9/2,11/2} transitions of Sm^III, and green emission in 4 related to the f-f ⁵D₄ → ⁷F_6,5,4,3 transitions of Tb^III. The lanthanide emissions, especially those of Sm^III, take advantage of the Ru^II-to-Ln^III energy transfer. The Ce^III and Tb^III emissions are also supported by the excitation of the d-f electronic states. Exploring emission features of the Ln^III-Ru^II networks, two series of heterobi-lanthanide systems, K{Sm_xCe_1-x(H₂O)_n[Ru(CN)₆]}·mH₂O (x = 0.47, 0.88, 0.88, 0.99, 0.998; 5-9) and K{Tb_xCe_1-x(H₂O)_n[Ru(CN)₆]}·mH₂O (x = 0.56, 0.65, 0.93, 0.99, 0.997; 10-14) were prepared. They exhibit the composition- and excitation-dependent tuning of emission from blue to red and blue to green, respectively. Finally, the heterotri-lanthanide system of the K{Sm_0.4Tb_0.599Ce_0.001(H₂O)₂[Ru(CN)₆]}·2.5H₂O (15) composition shows the rich emission spectrum consisting of the peaks related to Ce^III, Tb^III, and Sm^III centers, which gives the emission color tuning from blue to orange and white-light emission of the CIE 1931 xy parameters of 0.325, 0.333.

Exploration of glassy state in Prussian blue analogues

Prussian blue analogues (PBAs) are archetypes of microporous coordination polymers/metal–organic frameworks whose versatile composition allows for diverse functionalities. However, developments in PBAs have centred solely on their crystalline state, and the glassy state of PBAs has not been explored. Here we describe the preparation of the glassy state of PBAs via a mechanically induced crystal-to-glass transformation and explore their properties. The preservation of short-range metal–ligand–metal connectivity is confirmed, enabling the framework-based functionality and semiconductivity in the glass. The transformation also generates unconventional CN⁻ vacancies, followed by the reduction of metal sites. This leads to significant porosity enhancement in recrystallised PBA, enabled by further accessibility of isolated micropores. Finally, mechanical stability under stress for successful vitrification is correlated to defect contents and interstitial water. Our results demonstrate how mechanochemistry provides opportunities to explore glassy states of molecular framework materials in which the stable liquid state is absent.

Developments in Prussian blue analogues (PBAs) have centred solely on their crystalline state. Here, the authors describe the preparation of the glassy state of PBAs via a mechanically induced crystal-to-glass transformation and explore their properties.

Advances and perspectives of actinide chemistry from ex situ high pressure and high temperature chemical studies

High pressure high temperature (HP/HT) studies of actinide compounds allow the chemistry and bonding of among the most exotic elements in the periodic table to be examined under the conditions often only found in the severest environments of nature. Peering into this realm of physical extremity, chemists have extracted detailed knowledge of the fundamental chemistry of actinide elements and how they contribute to bonding, structure formation and intricate properties in compounds under such conditions. The last decade has resulted in some of the most significant contributions to actinide chemical science and this holds true for ex situ chemical studies of actinides resulting from HP/HT conditions of over 1 GPa and elevated temperature. Often conducted in tandem with ab initio calculations, HP/HT studies of actinides have further helped guide and develop theoretical modelling approaches and uncovered associated difficulties. Accordingly, this perspective article is devoted to reviewing the latest advancements made in actinide HP/HT ex situ chemical studies over the last decade, the state-of-the-art, challenges and discussing potential future directions of the science. The discussion is given with emphasis on thorium and uranium compounds due to the prevalence of their investigation but also highlights some of the latest advancements in high pressure chemical studies of transuranium compounds. The perspective also describes technical aspects involved in HP/HT investigation of actinide compounds.

Zero area thermal expansion of honeycomb layers via double distortion relaxation in (PPh4)[Cu2(CN)3]

The zero area TE of cyanide-bridged honeycomb layers occurs by complementary structural changes in the cation and anion counterparts.

Combined Experimental and Ab Initio Methods for Rationalization of Magneto-Luminescent Properties of YbIII Nanomagnets Embedded in Cyanido/Thiocyanidometallate-Based Crystals

The ab initio calculations were correlated with magnetic and emission characteristics to understand the modulation of properties of NIR-emissive [Yb^III(2,2'-bipyridine-1,1'-dioxide)₄]³⁺ single-molecule magnets by cyanido/thiocyanidometallate counterions, [Ag^I(CN)₂]^- (1), [Au^I(SCN)₂]^- (2), [Cd^II(CN)₄]^2-/[Cd^II₂(CN)₇]^3- (3), and [M^III(CN)₆]^3- [M^III = Co (4), Ir (5), Fe (6), Cr (7)]. Theoretical studies indicate easy-axis-type ground doublets for all Yb^III centers. They differ in the magnetic axiality; however, transversal g-tensor components are always large enough to explain the lack of zero-dc-field relaxation. The excited doublets lie more than 120 cm^-1 above the ground one for all Yb^III centers. It was confirmed by high-resolution emission spectra reproduced from the ab initio calculations that give reliable insight into energies and oscillator strengths of optical transitions. These findings indicate the dominance of Raman relaxation with the power n varying from 2.93(4) to 6.9(2) in the 4-3-5-1-2 series. This trend partially follows the magnetic axiality, being deeper correlated with the phonon modes schemes of (thio)cyanido matrices.

A rare isostructural series of 3d-4f cyanido-bridged heterometallic squares obtained by assembling [FeIII{HB(pz)3}(CN)3]- and LnIII ions: synthesis, X-ray structure and cryomagnetic study

A new series of cyanido-bridged {Fe^IIILn^III}₂ neutral molecular squares of general formula [Fe{HB(pz)₃}(CN)(μ-CN)₂Ln(NO₃)₂(pyim)(Ph₃PO)]₂·2CH₃CN [Ln = Ce (1), Pr (2), Nd (3), Gd (4), Tb (5), Dy (6) and Er (7); {HB(pz)₃}^- = hydrotris(pyrazolyl)borate, pyim = 2-(1H-imidazol-2-yl)pyridine and Ph₃PO = triphenylphosphine oxide] were obtained by reacting the low-spin [Fe{HB(pz)₃}(CN)₃]^- species with the preformed [Ln^III(pyim)(NO₃)₂(pyim)(Ph₃PO)]⁺ complex anions (generated in situ by mixing the nitrate salt of each Ln(III) ion with pyim and Ph₃PO molecules). Single-crystal X-ray diffraction studies show that 1-7 are isostructural compounds that crystallize in the triclinic P1̄ space group. Their crystal structures consist of centrosymmetric cyanido-bridged {Fe^IIILn^III}₂ molecular squares where two [Fe{HB(pz)₃}(CN)₃]^- units adopt bis-monodentate coordination modes towards two [Ln^III(pyim)(NO₃)₂(pyim)(Ph₃PO)]⁺ moieties. The cis-oriented convergent sites from both low-spin Fe^III and Ln^III fragments form a quasi square-shaped molecule in which the 3d and 4f ions alternatively occupy the corners of the square. Both Fe^III ions show a distorted octahedral surrounding (C_3v symmetry), whereas the Ln^III ions exhibit a distorted muffin-like geometry (C_s symmetry) in 1-7. The intramolecular Fe^III⋯Ln^III distances across the two cyanido-bridges range from ca. 5.48/5.46 up to ca. 5.58/5.61 Å. The molecular squares in 1-7 are interlinked through hydrogen bonds, weak π⋯π stacking and very weak C-H⋯π type interactions into three-dimensional supramolecular networks. The analysis of the solid-state direct-current (dc) magnetic susceptibility data of 1-7 in the temperature range 1.9-300 K reveals the occurrence of weak intra- and intermolecular antiferromagnetic interactions. The small intramolecular antiferromagnetic couplings in 4 compare well with those previously reported for parent systems. Although the coexistence of the spin-orbit coupling (SOC) of the low-spin iron(III) and lanthanide(III) ions in the remaining compounds together with the ligand field effects mask the visualization and make difficult the evaluation of the possible magnetic interactions in them, we were able to do it through a SOC model applied on exact or effective Hamiltonians. Frequency-dependent alternating current magnetic susceptibility signals in the temperature range 2.0-9.0 K under zero and non-zero static fields were observed for 5-7 which indicate slow magnetic relaxation (SMM) behavior. The usual absence of χ''_M maxima moved us to estimate their energy barriers through ln(χ''_M/ χ'_M) vs. 1/T plots, obtaining values from 25 to 40 cm^-1.

Inflation Negative Compressibility during Intrusion-Extrusion of a Non-Wetting Liquid into a Flexible Nanoporous Framework

Negative compressibility (NC) is a phenomenon when an object expands/shrinks in at least one of its dimensions upon compression/decompression. NC is very rare and is of great interest for a number of applications. In this work a gigantic (more than one order of magnitude higher compared to the reported values) NC effect was recorded during intrusion-extrusion of a non-wetting liquid into a flexible porous structure. For this purpose, in situ high-pressure neutron scattering, intrusion-extrusion experiments, and DFT calculations were applied to a system consisting of water and a highly hydrophobic Cu₂(tebpz) metal-organic framework (MOF), which upon water penetration expands in a and c directions to demonstrate NC coefficients more than order of magnitude higher compared to the highest values ever reported. The proposed approach is not limited to the materials used in this work and can be applied to achieve coefficients of negative linear compressibility of more than 10³ TPa^-1.

On the CN-K coordination modes in Kn[M6-n(CN)6]·xH2O: first evidence of CN-K electron-deficient bonding

Based on the determination of single crystal XRD structures of potassium hexacyanidometallates and on IR, and Raman data, here we propose for the first time the occurrence of an electron-deficient bonding between the N end of the CN^- ligand and the K⁺ metal center. The crystal structures of K_n[M^6-n(CN)₆]·xH₂O (M = Fe(ii), Ru(ii), Os(ii), Co(iii), Rh(iii), Ir(iii), Pt(iv)) reveal the presence of four types of CN^-K interactions: (i) a linear CN-K bond, (ii) the N ends in a bipodal coordination involving two K atoms, (iii) the N ends in a tripodal coordination mode involving three K atoms and (iv) the N ends and the K atoms with the largest K-N distances within the subseries that can be attributed to the electrostatic interactions. The bi- and tripodal coordination modes between the N end of the CN^- ligand and K⁺ ions are atypical and their nature is discussed in this contribution. The CN^- ligand N end can behave as a two-electron donor that participates in a three-center two-electron bonding (i.e. Class II μ-L 3c-2e) for a N-bipodal coordination mode or as a two-electron donor that participates in a four-center two-electron bonding (4c-2e) for an N-tripodal coordination mode. Such a possibility is closely related to the π-back donation ability of the CN^- ligand, which results in a charge density accumulation on the N end, which could be partially donated to the K atom through an σ-mechanism. For the divalent metals (Fe, Ru, Os), the solids crystallize with a monoclinic unit cell in the C2/c space group, while for the trivalent ones (Co, Rh, Ir), the crystal structure corresponds to an orthorhombic unit cell in the Pbcn space group. Potassium hexacyanidoplatinate(iv) crystallizes with a trigonal unit cell, in the P3[combining macron]1m space group, where each N end is always found coordinating two K atoms. The finding of these novel coordination modes of the CN^- ligands, relying on an electron-deficient bonding behavior, paves the way for the design of functional materials based on hexacyanidometallates. The experimental results and the proposed electron-deficient bonding model herein discussed were appropriately supported by the computational calculations.

Theoretical investigation of tetrahedral distortion of four-coordinate iron(II) centres in FePd(CN)4

The tetrahedral distortion of iron(ii) centres in the cyanide-bridged framework FePd(CN)4 was recently demonstrated experimentally. Here, we theoretically confirmed the electronically driven tetrahedral distortion of iron(ii) by comparing the density of states and total energies of FePd(CN)4 (d6) and ZnPd(CN)4 (d10). The calculation results suggested that a Jahn-Teller-like effect is caused on the tetrahedral geometry by the electronic effect of unequally occupied non-bonding 3d orbitals in the corresponding structure.

Photoswitchable Nonlinear-Optical Crystal Based on a Dysprosium-Iron Nitrosyl Metal Assembly

Nitrosyl metal complexes (M-NO), in which nitrosyl ligands are coordinated to transition-metal ions, have been studied from the viewpoints of physiological activity, catalytic activity, and photosensitivity. The structural flexibility and electric polarization of the nitrosyl ligand are attractive characteristics. Herein we show a photoswitchable nonlinear-optical (NLO) crystal based on a dysprosium-iron nitrosyl assembly. This crystal is composed of a one-dimensional chain structure in the polar Pna2₁ space group. Because of spontaneous electric polarization, it exhibits a NLO effect of second harmonic generation (SHG). The SHG signal reversibly changes by alternate irradiation with 473 and 804 nm laser lights. The observed photoreversible switching effect on SHG is caused by photoinduced linkage isomerization of the metal nitrosyl sites, i.e., M-N⁺═O ↔ M-O═N⁺. Such an optically switchable NLO crystal should be useful for optical devices such as optical filters and optical shutters as well as probes in SHG microscopy.

Diverse physical functionalities of rare-earth hexacyanidometallate frameworks and their molecular analogues

The combination of rare-earth metal complexes and hexacyanidometallates of transition metals is a fruitful pathway for achieving functional materials exhibiting a wide scope of mechanical, magnetic, optical, and electrochemical properties.

Extremely low-frequency phonon material and its temperature- and photo-induced switching effects

Atomic vibrations due to stretching or bending modes cause optical phonon modes in the solid phase. These optical phonon modes typically lie in the frequency range of 102 to 104 cm-1. How much can the frequency of optical phonon modes be lowered? Herein we show an extremely low-frequency optical phonon mode of 19 cm-1 (0.58 THz) in a Rb-intercalated two-dimensional cyanide-bridged Co-W bimetal assembly. This ultralow frequency is attributed to a millefeuille-like structure where Rb ions are very softly sandwiched between the two-dimensional metal-organic framework, and the Rb ions slowly vibrate between the layers. Furthermore, we demonstrate temperature-induced and photo-induced switching of this low-frequency phonon mode. Such an external-stimulation-controllable sub-terahertz (sub-THz) phonon crystal, which has not been reported before, should be useful in devices and absorbers for high-speed wireless communications such as beyond 5G or THz communication systems.

Solvent-Dependent Bending Ability of Salen-Derived Organic Crystals

The formation of plastic or brittle organic crystals of salen derivatives that depend on the solvents employed for crystallization is demonstrated. Large yellow crystals (ranging from mm to cm size) of ten different salen derivatives were obtained and investigated. Among them, (bis(2-hydroxyacetophenone)ethylenediimine) 2, which was recrystallized from dichloromethane, tetrahydrofuran or chloroform, exhibited plastic deformation behaviour when mechanical force was applied to the (001) face. In contrast, when 2 was recrystallized from benzene, brittle crystals were obtained. Face indexing confirmed that different crystal faces were obtained by depending on the solvent employed for recrystallization, which leads to either flexible (plastic) or brittle crystals. Photoluminescence with a band maximum at 510 nm and thermochromism related to tautomerism between OH and NH forms were also investigated, and indicate that 2 is a flexible organic single-crystal material with multifunctional properties.

Colossal Negative Linear Compressibility in Porous Organic Salts

Negative linear compressibility (NLC) is a common sense violation (that is, crystal phases expand in one or more directions under hydrostatic compression). The excellent NLC performance of crystal materials is intrinsically related to the geometric structure of its skeleton. Here, we discovered a crystalline porous organic salt (CPOS-1); high-pressure X-ray diffraction experiments reveal that the CPOS-1 shows colossal NLC (K_c = -90.7 T Pa^-1) behavior along the c axis. This incredible performance arises from the flexible "supramolecular spring" formed by the charge-enhanced N-H⁺···^-O-S hydrogen bond interaction between the anionic sulfonate and the cationic ammonium ion. Furthermore, we reveal the relationship between this rare NLC behavior and single crystal proton conductivity using high-pressure electrochemical impedance spectroscopy (EIS) method. We believe that NLC behavior research on such inexpensive and readily available porous organic materials is of great significance for accelerating the research and application of NLC materials, especially in organic system.

Dehydration-Hydration Switching of Single-Molecule Magnet Behavior and Visible Photoluminescence in a Cyanido-Bridged DyIIICoIII Framework

Microporous magnets compose a class of multifunctional molecule-based materials where desolvation-driven structural transformation leads to the switching of magnetic properties. Herein, we present a special type of microporous magnet where a dehydration-hydration process within a bimetal coordination framework results in the switching of emissive Dy^III single-molecule magnets (SMMs). We report a three-dimensional (3-D) cyanido-bridged coordination polymer, {[Dy^III(H₂O)₂][Co^III(CN)₆]}·2.2H₂O (1), and its dehydrated form of {Dy^III[Co^III(CN)₆]} (2), which was obtained through a reversible single-crystal-to-single-crystal transformation. Both phases are composed of paramagnetic Dy^III centers alternately arranged with diamagnetic hexacyanidocobaltates(III). The hydrated phase contains eight-coordinated [Dy^III(μ-NC)₆(H₂O)₂]^3- complexes of a square antiprism geometry, while the dehydrated form contains six-coordinated [Dy^III(μ-NC)₆]^3- moieties of a trigonal prism geometry. This change in coordination geometry results in the generation of Dy^III single-molecule magnets in 2, whereas slow magnetic relaxation effect is not observed for Dy^III sites in 1. The D_4d-to-D_3h symmetry change of Dy^III complexes produces also the shift of photoluminescent color from nearly white to deep yellow thanks to the modulation of emission bands of f-f electronic transitions. A combined approach utilizing dc magnetic data and low-temperature emission spectra confirmed an axial crystal field of trigonal prismatic Dy^III complexes in 2, which produces an Orbach type of slow magnetic relaxation. Therefore, we present a unique route to the efficient switching of SMM behavior and photoluminescence of Dy^III complexes embedded in a 3-D cyanido-bridged framework.

Continuous negative-to-positive tuning of thermal expansion achieved by controlled gas sorption in porous coordination frameworks

Control of the thermomechanical properties of functional materials is of great fundamental and technological significance, with the achievement of zero or negative thermal expansion behavior being a key goal for various applications. A dynamic, reversible mode of control is demonstrated for the first time in two Prussian blue derivative frameworks whose coefficients of thermal expansion are tuned continuously from negative to positive values by varying the concentration of adsorbed CO₂. A simple empirical model that captures site-specific guest contributions to the framework expansion is derived, and displays excellent agreement with the observed lattice behaviour.

Achieving control over the thermomechanical properties of functional materials is desirable, yet remains highly challenging. Here, the authors demonstrate continuous negative-to-positive tuning of thermal expansion in two Prussian blue analogues, by varying the concentration of adsorbed CO₂.

Triethylphosphine as a molecular gear - phase transitions in ferrocenyl-acetylide-gold(I)

A sequence of two discontinuous phase transitions, occurring just above 125 K and 148 K, has been observed for a ferrocenyl-acetylide-gold(I) complex with triethylphosphine, structure (1), by means of a multi-temperature single-crystal X-ray diffraction technique. Three distinct phases have been identified. The high-temperature α and low-temperature γ phases share the same space group Pbca, whereas the intermediate β phase is in the Pb2₁a subgroup of Pbca. In all phases molecules of (1) form well defined double layers, with PEt₃ groups interlocking in planes perpendicular to c. On the molecular level, both phase transitions involve almost uniquely a conformational change of triethylphosphine: a gear-like rotation around the P-Au axis and concerted flips of the ethyl moieties. The mechanism of these transitions may be imagined as initiated by a rotation of a single PEt₃ group in a double layer (a single gear movement), followed by adjacent phosphines adjusting their conformations as a result of steric strain. The structural changes underlying phase transitions are sequential, occurring layer-wise, the γ→β transition involving approximately every other layer in the crystal lattice, the β→α yielding a total conformation change. The sequence of phase transitions results in a noticeable contraction of the crystal cell volume.

Positive and Negative Two-Dimensional Thermal Expansion via Relaxation of Node Distortions

The ability to tune physical properties is attractive for the development of new materials for myriad applications. Understanding and controlling the structural dynamics in complicated network structures like coordination polymers (CPs) is particularly challenging. We report a series of two-dimensional CPs [Mn(salen)]₂[M(CN)₄]· xH₂O (M = Pt (1), PtI₂ (2), and MnN (3)) incorporating zigzag cyano-network layers that display composition-dependent anisotropic thermal expansion properties. Variable-temperature single-crystal X-ray structural analyses demonstrated that the thermal expansion behavior is caused by double structural distortions involving [Mn(salen)]⁺ units incorporated into the zigzag layers. Thermal relaxations produce structural transformations resulting in positive thermal expansion for 2·H₂O and negative thermal expansion for 3. In the case of 1·H₂O, the relaxation does not occur and zero thermal expansion results in the plane between 200 to 380 K. The present study proposes a new strategy based on structural distortions in coordination networks to control thermal responsivities of frameworks.

Elastically Flexible Crystals have Disparate Mechanisms of Molecular Movement Induced by Strain and Heat

Elastically flexible crystals form an emerging class of materials that exhibit a range of notable properties. The mechanism of thermal expansion in flexible crystals of bis(acetylacetonato)copper(II) is compared with the mechanism of molecular motion induced by bending and it is demonstrated that the two mechanisms are distinct. Upon bending, individual molecules within the crystal structure reversibly rotate, while thermal expansion results predominantly in an increase in intermolecular separations with only minor changes to molecular orientation through rotation.

Anisotropic Thermal and Guest-Induced Responses of an Ultramicroporous Framework with Rigid Linkers

The interdependent effects of temperature and guest uptake on the structure of the ultramicroporous metal-organic framework [Cu₃ (cdm)₄ ] (cdm=C(CN)₂ (CONH₂ )^- ) were explored in detail by using in situ neutron scattering and density functional theory calculations. The tetragonal lattice displays an anisotropic thermal response related to a hinged "lattice-fence" mechanism, unusual for this topology, which is facilitated by pivoting of the rigid cdm anion about the Cu nodes. Calculated pore-size metrics clearly illustrate the potential for temperature-mediated adsorption in ultramicroporous frameworks due to thermal fluctuations of the pore diameter near the value of the target guest kinetic diameter, though in [Cu₃ (cdm)₄ ] this is counteracted by a competing contraction of the pore with increasing temperature as a result of the anisotropic lattice response.

Peptide metal–organic frameworks under pressure: flexible linkers for cooperative compression

The peptidic linker in Zn(GlyTyr)₂ provides a compressible cushion that allows for accommodating large distortions in the framework whilst avoiding amorphization.

Design of 3d–4f molecular squares through the [Fe{(HB(pz)3)}(CN)3]− metalloligand

A new series of cyanido-bridged {FeIII2LnIII2} heterobimetallic molecular squares [Ln = La (1), Gd (2), Tb (3) and Dy (4)] has been prepared and magneto-structurally investigated.

A three-dimensional cubic halogen-bonded network

The rational, deliberate design of supramolecular architectures is of great importance for the discovery of complex materials.

Atomic resolution of structural changes in elastic crystals of copper(II) acetylacetonate

Single crystals are typically brittle, inelastic materials. Such mechanical responses limit their use in practical applications, particularly in flexible electronics and optical devices. Here we describe single crystals of a well-known coordination compound-copper(II) acetylacetonate-that are flexible enough to be reversibly tied into a knot. Mechanical measurements indicate that the crystals exhibit an elasticity similar to that of soft materials such as nylon, and thus display properties normally associated with both hard and soft matter. Using microfocused synchrotron radiation, we mapped the changes in crystal structure that occur on bending, and determined the mechanism that allows this flexibility with atomic precision. We show that, under strain, the molecules in the crystal reversibly rotate, and thus reorganize to allow the mechanical compression and expansion required for elasticity and still maintain the integrity of the crystal structure.

A Series of Bimetallic Ammonium AlNa Formates

A series of AlNa bimetallic ammonium metal formate frameworks (AlNa AMFFs) have been prepared by employing various ammoniums from NH₄⁺ to large linear polyammoniums. The series consists of six perovskites of (4¹² ⋅6³ ) topology for mono-ammoniums, two chiral (4⁹ ⋅6⁶ ) frameworks incorporating polyethylene ammoniums, two niccolites with (4¹² ⋅6³ )(4⁹ ⋅6⁶ ) topology containing diammoniums, and two layered compounds made of 2D (4,4) AlNa formate sheets intercalated by small diammoniums. The first ten compounds present the structural hierarchy of (4¹² ⋅6³ )_m (4⁹ ⋅6⁶ )_n framework topologies for (m, n)=(1, 0), (0, 1), and (1, 1), respectively, in parallel to the homometallic AMFFs for divalent metals. The symmetry lowering, asymmetric formate bridges, and different hydrogen-bonding strengths appeared in the bimetallic structures owing to the different charge and size of Al³⁺ and Na⁺ seemingly inhibits the occurrence of phase transitions for more than half the AlNa AMFFs within the series, and the bimetallic members undergoing phase transitions show different transition behaviors and dielectric properties compared with the homometallic analogs. Anisotropic/negative/zero thermal expansions of the materials could be rationally attributed to the librational motion, or flip movement between different sites, of the ammonium cations, and the coupled change of AlNa formate frameworks. The thermal and IR spectroscopic properties have also been investigated.

Zero in-Plane Thermal Expansion in Guest-Tunable 2D Coordination Polymers

Zero in-plane thermal expansion (TE) in a two-dimensional (2D) coordination polymer is demonstrated. The combination of components that expand and those that shrink into zigzag layers results in no net area change in the 2D materials with temperature. Single crystals of [Mn(salen)]₂[Mn(N)(CN)₄(guest)] (salen = N,N'-ethylenebis(salicylideneaminato), guest = MeOH and MeCN) were prepared, and variable-temperature single-crystal X-ray structural analyses demonstrated that these compounds exhibited both anisotropic positive and negative thermal expansion depending on the guest species. The TE behavior results from distortions of the octahedral coordination geometry of [Mn(salen)]⁺ units in the zigzag layers. When both guests MeOH and MeCN were incorporated into one material, [Mn(salen)]₂[Mn(N)(CN)₄(MeOH)_0.25(MeCN)_0.75], zero in-plane TE resulted in a range of temperature between 380 and 440 K.

Fine Tuning of Multicolored Photoluminescence in Crystalline Magnetic Materials Constructed of Trimetallic EuxTb1-x[Co(CN)6] Cyanido-Bridged Chains

Coordination compounds built of trivalent lanthanide ions have been demonstrated as promising solid-state materials for diverse photoluminescent applications and as attractive magnetic objects with the prospective application in information storage and spintronics. We present a synthetic methodology in which both luminescent and magnetic functionalities are induced within lanthanide-based coordination polymers by the application of hexacyanocobaltate(III) anions and 3-hydroxypyridine (3-OHpy), both coordinated to 4f-metal ions modulating the lanthanide-centered properties. We report a series of trimetallic cyanido-bridged chains {[Eu^III_xTb^III_1-x(3-OHpy)₂(H₂O)₄][Co^III(CN)₆]}·H₂O (x = 1, 0.8, 0.5, 0.4, 0.3, 0.2, 0.1, 0; compounds 1, 2, ..., 7, 8). They reveal tunable visible photoluminescence ranging from green, through yellow and orange, to red color depending on the composition of material and the wavelength of UV excitation light. Such multicolored emission is realized by the adjusted ratio between red emissive Eu³⁺ and green emissive Tb³⁺ and by the selection of wavelengths of UV light controlling the intensities of Eu- and Tb-based components of visible luminescence. The photoluminescence is enhanced by the energy-transfer (ET) process from [Co^III(CN)₆]^3- and 3-OHpy to lanthanides, and the efficiencies of ET to Eu and Tb play an important role in the switchable emission. The whole family, 1-8, exhibits temperature-dependent paramagnetism due to the intrinsic property of lanthanide(3+) ions. Tb-containing 2-8 reveal the field-induced slow relaxation of magnetization due to the magnetic anisotropy of Tb³⁺. Moreover, the compounds built of large amounts of Tb reveal the double relaxation, the faster of a typical Tb^III single-ion origin, and the slower originating from the magnetic dipole-magnetic dipole interactions between neighboring Tb^III centers. Compound 2, which can be considered as a magnetically diluted sample, exhibits almost single relaxation process with the thermal energy barrier ΔE/k_B of 35.8(6) K and τ₀ = 1.1(2) × 10^-8 s at H_dc = 1500 Oe, indicating a single-molecule magnet behavior.

Negative Linear Compressibility Due to Layer Sliding in a Layered Metal-Organic Framework

Negative linear compressibility (NLC) is a rare and counterintuitive phenomenon because materials with this property would expand along one specific direction when uniformly compressed. NLC materials have a broad range of potential applications in designing pressure sensors, artificial muscles, and so on. Designing and searching for systems with NLC is desired and crucial for material and compression science. Herein, with the help of high-pressure X-ray diffraction measurements and density functional theory calculations, we find that the 2D layered Co(SCN)₂(pyrazine)₂ exhibits NLC with a new mechanism: layer sliding. When compressed, the ab planes slide along the a axis, leading to the decrease of lattice parameter β, which results in the NLC effect along principal axis X₃ (≈ -0.84a - 0.55c). The layer sliding mechanism opens exciting opportunities for seeking, designing, and synthesizing new classes of materials with anomalous mechanical properties in monoclinic layered or other related systems.

Hidden negative linear compressibility in lithiuml-tartrate

Normal mechanical behaviour at ambient pressure precedes anomalous mechanics as a result of competing strut compression and angle opening.