MIDA boronates are hydrolysed fast and slow by two different mechanisms

Simple Parameters and Data Processing for Better Signal-to-Noise and Temporal Resolution in In Situ 1D NMR Reaction Monitoring

In situ 1D NMR spectroscopic reaction monitoring allows detailed investigation of chemical kinetics and mechanism. Concentration versus time data are derived from a time series of NMR spectra. Each spectrum in the series is obtained by Fourier transform of the corresponding FID. When the spectrometer outputs FIDs recorded from multiple scans, the spectra benefit from an increase in signal-to-noise (S/N). However, this reduces the number of FIDs and, thus, kinetic data points. We report a simple alternative in which the same number of scans is acquired by the spectrometer, but each scan is saved independently. Signal averaging is then conducted by postacquisition processing. This leads to an increase in both the S/N and the number of kinetic data points and can avoid "overaveraging" effects. The entire series of single-scan FIDs spanning the reaction lifetime can be summed to yield a "total reaction spectrum" in which intermediates can be identified. The method can be applied in coherence with phase cycling to minimize spectral distortion during solvent signal suppression. Overall, the approach simplifies the preacquisition parameters to the estimation of the reaction duration and T1max and then the selection of the pulse angle, θ, and scan repetition time, τR, without the need to set the signal averaging before the experiment.

Weak Base-Promoted Direct Cross-Coupling of Naphthalene-1,8-diaminato-substituted Arylboron Compounds

The indispensability of a base in Suzuki-Miyaura coupling (SMC) employing organoboronic acids/esters is well recognized, which occasionally induces competitive protodeborylation in organoboron reagents. This phenomenon is particularly pronounced in fluorine-substituted aryl and heteroaryl boron compounds. Here, we show that direct SMC of naphthalene-1,8-diaminato (dan)-substituted aryl boron compounds, Ar-B(dan), characterized by its remarkable stability toward protodeborylation due to their diminished boron-Lewis acidity, occurs utilizing a weak base in conjunction with a palladium/copper cooperative catalyst system. The approach delineated in this study enables the efficient incorporation of various perfluoroaryl- and heteroaryl-B(dan) reagents, while maintaining high functional group tolerance. Furthermore, the inherent inertness of the B(dan) moiety allowed sequential cross-coupling, where other metallic moieties chemoselectively undergo the reaction, thus leading to the concise, protection-free synthesis of oligoarenes. Our results provide a potent approach to a delicate dilemma between a protodeborylation-resistant property and SMC activity intimately linked to boron-Lewis acidity.

Gold(III) Auracycles Featuring C(sp3)-Au-C(sp2) Bonds: Synthesis and Mechanistic Insights into the Cycloauration Step

The direct auration of arenes is a key step in numerous gold-catalyzed reactions. Although reported more than 100 years ago, understanding of its underlying mechanism has been hampered by the difficulties in the isolation of relevant intermediates given the propensity of gold(III) species to undergo reductive elimination. Here, we report the synthesis and isolation of a new family of intriguing zwitterionic [C(sp3)^C(sp2)]-auracyclopentanes, as well as of their alkyl-gold(III) precursors and demonstrate their value as mechanistic probes to study the C(sp2)-Au bond-forming event. Experimental investigations employing Kinetic Isotope Effects (KIE), Hammett plot, and Eyring analysis provided important insights into the formation of the auracycle. The data suggest a SEAr mechanism wherein the slowest step might be the π-coordination between the arene and the gold(III) center, en route to the Wheland intermediate. We also show that these auracyclopentanes can work as catalysts in several gold-promoted transformations.

Derivatization of 2,1,3-Benzothiadiazole via Regioselective C-H Functionalization and Aryne Reactivity

Despite growing interest in 2,1,3-benzothiadiazole (BTD) as an integral component of many functional molecules, methods for the functionalization of its benzenoid ring have remained limited, and many even simply decorated BTDs have required de novo synthesis. We show that regioselective Ir-catalyzed C-H borylation allows access to versatile 5-boryl or 4,6-diboryl BTD building blocks, which undergo functionalization at the C4, C5, C6, and C7 positions. The optimization and regioselectivity of C-H borylation are discussed. A broad reaction scope is presented, encompassing ipso substitution at the C-B bond, the first examples of ortho-directed C-H functionalization of BTD, ring closing reactions to generate fused ring systems, as well as the generation and capture reactions of novel BTD-based heteroarynes. The regioselectivity of the latter is discussed with reference to the Aryne Distortion Model.

Conjugated Zwitterionic Oligomers as Ligands on Perovskite Nanocrystals: Hybrid Structures with Tunable Interparticle Spacing

Conventional ligands for CsPbBr3 perovskite nanocrystals (NCs), composed of polar, coordinating head groups (e.g., ammonium or zwitterionic) and aliphatic tails, are instrumental in stabilizing the NCs against sintering and aggregation. Nonetheless, the aliphatic (insulating) nature of these ligands represents drawbacks with respect to objectives in optoelectronics, and yet removing these ligands typically leads to a loss of colloidal stability. In this paper, we describe the preparation of CsPbBr3 NCs in the presence of discrete conjugated oligomers that were prepared by an iterative synthetic approach and capped at their chain ends with sulfobetaine zwitterions for perovskite coordination. Notably, these zwitterionic oligofluorenes are compatible with the hot injection and ligand exchange conditions used to prepare CsPbBr3 NCs, yielding stable NC dispersions with high photoluminescence quantum yields (PLQY, >90%) and spectral features representative of both the perovskite core and conjugated ligand shell. Controlling the chain length of these capping ligands effectively regulated inter-NC spacing and packing geometry when cast into solid films, with evidence derived from both transmission electron microscopy (TEM) and grazing incidence X-ray scattering measurements.

Modular Synthesis of Complex Benzoxaboraheterocycles through Chelation-Assisted Rh-Catalyzed [2 + 2 + 2] Cycloaddition

Benzoxaboraheterocycles (BOBs) are moieties of increasing interest in the pharmaceutical industry; however, the synthesis of these compounds is often difficult or impractical due to the sensitivity of the boron moiety, the requirement for metalation-borylation protocols, and lengthy syntheses. We report a straightforward, modular approach that enables access to complex examples of the BOB framework through a Rh-catalyzed [2 + 2 + 2] cycloaddition using MIDA-protected alkyne boronic acids. The key to the development of this methodology was overcoming the steric barrier to catalysis by leveraging chelation assistance. We show the utility of the method through synthesis of a broad range of BOB scaffolds, mechanistic information on the chelation effect, intramolecular alcohol-assisted BMIDA hydrolysis, and linear/cyclic BOB limits as well as comparative binding affinities of the product BOB frameworks for ribose-derived biomolecules.

PdNPs/NiNWs as a welding tool for the synthesis of polyfluorene derivatives by Suzuki polycondensation under microwave radiation

Conjugated polymers are promising tools to differentiate various types of semiconducting single-walled carbon nanotubes (s-SWCNTs). However, their synthesis is challenging. Insufficient control over molecular weights, and unpredictive/unrepeatable batches hinder possible applications and scale-up. Furthermore, commercial homogeneous catalysts often require inert conditions and are almost impossible to recycle. To overcome these problems, we present a nanocatalyst consisting of magnetic nickel nanowires decorated with highly active palladium nanoparticles. A two-step wet chemical reduction protocol with the assistance of sonochemistry was employed to obtain a heterogeneous catalyst capable of conducting step-growth Suzuki polycondensation of a fluorene-based monomer. Additionally, we enhanced the performance of our catalytic system via controlled microwave irradiation, which significantly shortened the reaction time from 3 d to only 1 h. We studied the influence of the main process parameters on the yield and polymer chain length to gain insight into phenomena occurring in the presence of metallic species under microwave irradiation. Finally, the produced polymers were used to extract specific s-SWCNTs by conjugated polymer extraction to validate their utility.

Room Temperature Anhydrous Suzuki-Miyaura Polymerization Enabled by C-S Bond Activation

The Suzuki-Miyaura cross-coupling is one of the most important and powerful methods for constructing C-C bonds. However, the protodeboronation of arylboronic acids hinder the development of Suzuki-Miyaura coupling in the precise synthesis of conjugated polymers (CPs). Here, an anhydrous room temperature Suzuki-Miyaura cross-coupling reaction between (hetero)aryl boronic esters and aryl sulfides was explored, of which universality was exemplified by thirty small molecules and twelve CPs. Meanwhile, the mechanistic studies involving with capturing four coordinated borate intermediate revealed the direct transmetalation of boronic esters in the absence of H2 O suppressing the protodeboronation. Additionally, the room temperature reaction significantly reduced the homocoupling defects and enhanced the optoelectronic properties of the CPs. In all, this work provides a green protocol to synthesize alternating CPs.

Protection of Boronic Acids Using a Tridentate Aminophenol ONO Ligand for Selective Suzuki-Miyaura Coupling

Boronic acid protecting group chemistry powerfully enhances the versatility of Suzuki-Miyaura cross-coupling. Prominent examples include trifluoroborate salts, N-methyliminodiacetic acid (MIDA) boronates, and 1,8-diaminonaphthalene boronamides. In this work, we present a bis(2-hydroxybenzyl)methylamine (BOMA) ligand that forms tridentate complexes with boronic acids much like the MIDA ligand but the deprotection is facilitated by organic acids. The BOMA boronates showed considerable stability in both aqueous base and acid, and a variety of chemoselective reactions were performed on these boronates, including selective Suzuki-Miyaura coupling, palladium-catalyzed borylation, ester hydrolysis, alkylation, lithiation-borylation, and oxidative hydroxydeboronation.

Emerging Trends in Cross-Coupling: Twelve-Electron-Based L1Pd(0) Catalysts, Their Mechanism of Action, and Selected Applications

Monoligated palladium(0) species, L1Pd(0), have emerged as the most active catalytic species in the cross-coupling cycle. Today, there are methods available to generate the highly active but unstable L1Pd(0) catalysts from stable precatalysts. While the size of the ligand plays an important role in the formation of L1Pd(0) during in situ catalysis, the latter can be precisely generated from the precatalyst by various technologies. Computational, kinetic, and experimental studies indicate that all three steps in the catalytic cycle─oxidative addition, transmetalation, and reductive elimination─contain monoligated Pd. The synthesis of precatalysts, their mode of activation, application studies in model systems, as well as in industry are discussed. Ligand parametrization and AI based data science can potentially help predict the facile formation of L1Pd(0) species.

Preparation of Dienyl Boronates by Tandem Ene-Yne Metathesis/Dienyl Isomerization: Ready Access to Diene Building Blocks for the Synthesis of Polyenes

The ene-yne metathesis of alkenyl boronates with terminal alkynes is reported. These challenging metatheses were accomplished using a Grubbs catalyst bearing the cyclic alkyl amino carbene (CAAC) ligand, whereas N-heterocyclic carbene (NHC) derived catalysts gave lower yields. Subsequent dienyl isomerization via a cobalt-catalyzed hydrogen atom transfer (HAT) furnished the more substituted dienyl boronate with high EE/EZ ratios. Finally, the resulting dienyl boronate products were successfully used in Suzuki-Miyaura cross-coupling reactions and in a Diels-Alder cycloaddition.

Applications of the Reversible Boronic Acids/Boronate Switch to Nucleic Acids

Over the last decades, boron and nucleic acids chemistries have gained a lot of attention for biological, medicinal and analytical applications. Our laboratory has a long-standing interest in both chemistries and owing to the ability of boronic acids to react with cis-diol function in aqueous media we developed over the years a variety of applications ranging from molecular recognition and sensing to the development of reversible dynamic systems in which the natural phosphodiester linkage was replaced by a boronate. In this account, we summarize research results from our group from our preliminary studies on molecular recognition of ribonucleosides to the dynamic assembly of functional DNAzymes. In particular, the various parameters influencing the dynamic nature of these reversible covalent bonds able to respond to external stimuli are discussed. Finally, current challenges and opportunities for boron-based nucleic acids are also addressed.

Modular Generation of (Iodinated) Polyarenes Using Triethylgermane as Orthogonal Masking Group

While the modular construction of molecules from suitable building blocks is a powerful means to more rapidly generate a diversity of molecules than through customized syntheses, the further evolution of the underlying coupling methodology is key to realize widespread applications. We herein disclose a complementary modular coupling approach to the widely employed Suzuki coupling strategy of boron containing precursors, which relies on organogermane containing building blocks as key orthogonal functionality and an electrophilic (rather than nucleophilic) unmasking event paired with air-stable PdI dimer based bond construction. This allows to significantly shorten the reaction times for the iterative coupling steps and/or to close gaps in the accessible compound space, enabling straightforward access also to iodinated compounds.

A Modular Synthesis of Teraryl-Based α-Helix Mimetics, Part 5: A Complete Set of Pyridine Boronic Acid Pinacol Esters Featuring Side Chains of Proteinogenic Amino Acids

Teraryl-based α-helix mimetics have proven to be useful compounds for the inhibition of protein-protein interactions (PPI). We have developed a modular and flexible approach for the synthesis of teraryl-based α-helix mimetics using pyridine containing boronic acid building blocks to increase the water solubility. Following our initial publication in which we have introduced the methodology in combination with sequential Pd-catalyzed cross-coupling for teraryl assembly, we can now report a complete set of pyridine based boronic acid building blocks decorated with side chains of all proteinogenic amino acids relevant for PPI (Ala, Arg, Asn, Asp, Cys, Gln, Glu, His, Ile, Leu, Lys, Met, Phe, Ser, Thr, Trp, Tyr, Val) to complement the core fragment set. For a representative set of teraryls we have studied the influence of the pyridine rings on the solubility of the assembled oligoarenes.

In Situ Studies of Arylboronic Acids/Esters and R3SiCF3 Reagents: Kinetics, Speciation, and Dysfunction at the Carbanion-Ate Interface

Reagent instability reduces the efficiency of chemical processes, and while much effort is devoted to reaction optimization, less attention is paid to the mechanistic causes of reagent decomposition. Indeed, the response is often to simply use an excess of the reagent. Two reaction classes with ubiquitous examples of this are the Suzuki-Miyaura cross-coupling of boronic acids/esters and the transfer of CF₃ or CF₂ from the Ruppert-Prakash reagent, TMSCF₃. This Account describes some of the overarching features of our mechanistic investigations into their decomposition. In the first section we summarize how specific examples of (hetero)arylboronic acids can decompose via aqueous protodeboronation processes: Ar-B(OH)₂ + H₂O → ArH + B(OH)₃. Key to the analysis was the development of a kinetic model in which pH controls boron speciation and heterocycle protonation states. This method revealed six different protodeboronation pathways, including self-catalysis when the pH is close to the pK_a of the boronic acid, and protodeboronation via a transient aryl anionoid pathway for highly electron-deficient arenes. The degree of "protection" of boronic acids by diol-esterification is shown to be very dependent on the diol identity, with six-membered ring esters resulting in faster protodeboronation than the parent boronic acid. In the second section of the Account we describe ¹⁹F NMR spectroscopic analysis of the kinetics of the reaction of TMSCF₃ with ketones, fluoroarenes, and alkenes. Processes initiated by substoichiometric "TBAT" ([Ph₃SiF₂][Bu₄N]) involve anionic chain reactions in which low concentrations of [CF₃]^- are rapidly and reversibly liberated from a siliconate reservoir, [TMS(CF₃)₂][Bu₄N]. Increased TMSCF₃ concentrations reduce the [CF₃]^- concentration and thus inhibit the rates of CF₃ transfer. Computation and kinetics reveal that the TMSCF₃ intermolecularly abstracts fluoride from [CF₃]^- to generate the CF₂, in what would otherwise be an endergonic α-fluoride elimination. Starting from [CF₃]^- and CF₂, a cascade involving perfluoroalkene homologation results in the generation of a hindered perfluorocarbanion, [C₁₁F₂₃]^-, and inhibition. The generation of CF₂ from TMSCF₃ is much more efficiently mediated by NaI, and in contrast to TBAT, the process undergoes autoacceleration. The process involves NaI-mediated α-fluoride elimination from [CF₃][Na] to generate CF₂ and a [NaI·NaF] chain carrier. Chain-branching, by [(CF₂)₃I][Na] generated in situ (CF₂ + TFE + NaI), causes autoacceleration. Alkenes that efficiently capture CF₂ attenuate the chain-branching, suppress autoacceleration, and lead to less rapid difluorocyclopropanation. The Account also highlights how a collaborative approach to experiment and computation enables mechanistic insight for control of processes.

Synthesis of 2-BMIDA Indoles via Heteroannulation: Applications in Drug Scaffold and Natural Product Synthesis

A Pd-catalyzed heteroannulation approach for the synthesis of C2 borylated indoles is reported. The process allows access to highly functionalized 2-borylated indole scaffolds with complete control of regioselectivity. The utility of the process is demonstrated in the synthesis of borylated sulfa drugs and in the concise synthesis of the Aspidosperma alkaloid Goniomitine.

Automated iterative Csp3-C bond formation

Fully automated synthetic chemistry would substantially change the field by providing broad on-demand access to small molecules. However, the reactions that can be run autonomously are still limited. Automating the stereospecific assembly of Csp3-C bonds would expand access to many important types of functional organic molecules1. Previously, methyliminodiacetic acid (MIDA) boronates were used to orchestrate the formation of Csp2-Csp2 bonds and were effective building blocks for automating the synthesis of many small molecules2, but they are incompatible with stereospecific Csp3-Csp2 and Csp3-Csp3 bond-forming reactions3-10. Here we report that hyperconjugative and steric tuning provide a new class of tetramethyl N-methyliminodiacetic acid (TIDA) boronates that are stable to these conditions. Charge density analysis11-13 revealed that redistribution of electron density increases covalency of the N-B bond and thereby attenuates its hydrolysis. Complementary steric shielding of carbonyl π-faces decreases reactivity towards nucleophilic reagents. The unique features of the iminodiacetic acid cage2, which are essential for generalized automated synthesis, are retained by TIDA boronates. This enabled Csp3 boronate building blocks to be assembled using automated synthesis, including the preparation of natural products through automated stereospecific Csp3-Csp2 and Csp3-Csp3 bond formation. These findings will enable increasingly complex Csp3-rich small molecules to be accessed via automated assembly.

Ability of Boron to Act as a Nucleophile and an Electrophile in Boryl Shift Reactions Unveiled by Electron Density Distribution Analysis

The behavior of the tetracoordinate boron of N-methyliminodiacetic acid (MIDA) boronates as a nucleophile and an electrophile during the 1,2-boryl migration promoted by a Lewis acid and the 1,4-boryl migration promoted by a neighboring atom, respectively, have been investigated using density functional theory and the quantum theory of atoms in molecules. We found that when boron acts as a nucleophile, the electron density of the B-N interaction of the BMIDA moiety maintains the charge concentration over the boron atom, facilitating its transport toward the electron-deficient center. In this process, the BMIDA remains as a tetracoordinate. On the other hand, the B-N weakening generates a charge depletion region over the boron, allowing it to interact with the electron-rich center of O₁, developing the boron atom, a pentacoordinate form. Then, the B-N bond breaking triggers a series of changes in the electronic structure of the boron atom. Our results explain the role of the MIDA ligand upon the remarkable susceptibility of the boron atom for switching its structural and electronic characteristics in the migration processes. In addition, the dichotomous behavior was evaluated with a different scenario, considering tricoordinate pinacol boronate as a boryl migrating group.

Heavy-Atom Kinetic Isotope Effects: Primary Interest or Zero Point?

Chemists have many options for elucidating reaction mechanisms. Global kinetic analysis and classic transition-state probes (e.g., LFERs, Eyring) inevitably form the cornerstone of any strategy, yet their application to increasingly sophisticated synthetic methodologies often leads to a wide range of indistinguishable mechanistic proposals. Computational chemistry provides powerful tools for narrowing the field in such cases, yet wholly simulated mechanisms must be interpreted with great caution. Heavy-atom kinetic isotope effects (KIEs) offer an exquisite but underutilized method for reconciling the two approaches, anchoring the theoretician in the world of calculable observables and providing the experimentalist with atomistic insights. This Perspective provides a personal outlook on this synergy. It surveys the computation of heavy-atom KIEs and their measurement by NMR spectroscopy, discusses recent case studies, highlights the intellectual reward that lies in alignment of experiment and theory, and reflects on the changes required in chemical education in the area.

A Lewis Base Nucleofugality Parameter, NFB, and Its Application in an Analysis of MIDA-Boronate Hydrolysis Kinetics

The kinetics of quinuclidine displacement of BH₃ from a wide range of Lewis base borane adducts have been measured. Parameterization of these rates has enabled the development of a nucleofugality scale (N^F_B), shown to quantify and predict the leaving group ability of a range of other Lewis bases. Additivity observed across a number of series R'_3-nR_nX (X = P, N; R' = aryl, alkyl) has allowed the formulation of related substituent parameters (n^f_PB, n^f_AB), providing a means of calculating N^F_B values for a range of Lewis bases that extends far beyond those experimentally derived. The utility of the nucleofugality parameter is explored by the correlation of the substituent parameter n^f_PB with the hydrolyses rates of a series of alkyl and aryl MIDA boronates under neutral conditions. This has allowed the identification of MIDA boronates with heteroatoms proximal to the reacting center, showing unusual kinetic lability or stability to hydrolysis.

Electrophilic Fluorination of Alkenes via Bora-Wagner-Meerwein Rearrangement. Access to β-Difluoroalkyl Boronates

The electrophilic fluorination of geminal alkyl substituted vinyl-Bmida derivatives proceeds via bora-Wagner-Meerwein rearrangement. According to DFT modelling studies this rearrangement occurs with a low activation barrier via a bora-cyclopropane shaped TS. The Bmida group has a larger migration aptitude than the alkyl moiety in the Wagner-Meerwein rearrangement of the presented electrophilic fluorination reactions.

Saturated Boronic Acids, Boronates, and Trifluoroborates: An Update on Their Synthetic and Medicinal Chemistry

This review discusses recent advances in the chemistry of saturated boronic acids, boronates, and trifluoroborates. Applications of the title compounds in the design of boron-containing drugs are surveyed, with special emphasis on α-amino boronic derivatives. A general overview of saturated boronic compounds as modern tools to construct C(sp³ )-C and C(sp³ )-heteroatom bonds is given, including recent developments in the Suzuki-Miyaura and Chan-Lam cross-couplings, single-electron-transfer processes including metallo- and organocatalytic photoredox reactions, and transformations of boron "ate" complexes. Finally, an attempt to summarize the current state of the art in the synthesis of saturated boronic acids, boronates, and trifluoroborates is made, with a brief mention of the "classical" methods (transmetallation of organolithium/magnesium reagents with boron species, anti-Markovnikov hydroboration of alkenes, and the modification of alkenyl boron compounds) and a special focus on recent methodologies (boronation of alkyl (pseudo)halides, derivatives of carboxylic acids, alcohols, and primary amines, boronative C-H activation, novel approaches to alkene hydroboration, and 1,2-metallate-type rearrangements).

α-Aminoboronates: recent advances in their preparation and synthetic applications

α-Aminoboronic acids and their derivatives are useful as bioactive agents. Thus far, three compounds containing an α-aminoboronate motif have been approved by the Food and Drug Administration (FDA) as protease inhibitors, and more are currently undergoing clinical trials. In addition, α-aminoboronic acids and their derivatives have found applications in organic synthesis, e.g. as α-aminomethylation reagents for the synthesis of chiral nitrogen-containing molecules, as nucleophiles for preparing valuable vicinal amino alcohols, and as bis-nucleophiles in the construction of valuable small molecule scaffolds. This review summarizes new methodology for the preparation of α-aminoboronates, including highlights of asymmetric synthetic methods and mechanistic explanations of reactivity. Applications of α-aminoboronates as versatile synthetic building blocks are also discussed.

Protodeboronation of (Hetero)Arylboronic Esters: Direct versus Prehydrolytic Pathways and Self-/Auto-Catalysis

The kinetics and mechanism of the base-catalyzed hydrolysis (ArB(OR)₂ → ArB(OH)₂) and protodeboronation (ArB(OR)₂ → ArH) of a series of boronic esters, encompassing eight different polyols and 10 polyfluoroaryl and heteroaryl moieties, have been investigated by in situ and stopped-flow NMR spectroscopy (¹⁹F, ¹H, and ¹¹B), pH-rate dependence, isotope entrainment, ²H KIEs, and KS-DFT computations. The study reveals the phenomenological stability of boronic esters under basic aqueous-organic conditions to be highly nuanced. In contrast to common assumption, esterification does not necessarily impart greater stability compared to the corresponding boronic acid. Moreover, hydrolysis of the ester to the boronic acid can be a dominant component of the overall protodeboronation process, augmented by self-, auto-, and oxidative (phenolic) catalysis when the pH is close to the pK_a of the boronic acid/ester.

The 2-Pyridyl Problem: Challenging Nucleophiles in Cross-Coupling Arylations

Azine-containing biaryls are ubiquitous scaffolds in many areas of chemistry, and efficient methods for their synthesis are continually desired. Pyridine rings are prominent amongst these motifs. Transition-metal-catalysed cross-coupling reactions have been widely used for their synthesis and functionalisation as they often provide a swift and tuneable route to related biaryl scaffolds. However, 2-pyridine organometallics are capricious coupling partners and 2-pyridyl boron reagents in particular are notorious for their instability and poor reactivity in Suzuki-Miyaura cross-coupling reactions. The synthesis of pyridine-containing biaryls is therefore limited, and methods for the formation of unsymmetrical 2,2'-bis-pyridines are scarce. This Review focuses on the methods developed for the challenging coupling of 2-pyridine nucleophiles with (hetero)aryl electrophiles, and ranges from traditional cross-coupling processes to alternative nucleophilic reagents and novel main group approaches.

Oxidative Rearrangement of MIDA (N-Methyliminodiacetic Acid) Boronates: Mechanistic Insights and Synthetic Applications

Herein we report that coordinative hemilability allows the MIDA (N-methyliminodiacetic acid) nitrogen to behave as a nucleophile and intramolecularly intercept palladium π-allyl intermediates. A mechanistic investigation indicates that this rearrangement proceeds through an S_N2-like displacement at tetrasubstituted boron to furnish novel DABN boronates. Oxidative addition into the N-C bond of the DABN scaffold furnishes borylated π-allyl intermediates that can then be trapped with a variety of nucleophiles, including in a three-component coupling.

Mechanistic Insights into C(sp2 )-C(sp)N Reductive Elimination from Gold(III) Cyanide Complexes

A new family of phosphine-ligated dicyanoarylgold(III) complexes has been prepared and their reactivity towards reductive elimination has been studied in detail. Both, a highly positive entropy of activation and a primary ^12/13 C KIE suggest a late concerted transition state while Hammett analysis and DFT calculations indicate that the process is asynchronous. As a result, a distinct mechanism involving an asynchronous concerted reductive elimination for the overall C(sp² )-C(sp)N bond forming reaction is characterized herein, for the first time, complementing previous studies reported for C(sp³ )-C(sp³ ), C(sp² )-C(sp² ), and C(sp³ )-C(sp² ) bond formation processes taking place on gold(III) species.

Boronic, diboronic and boric acid esters of 1,8-naphthalenediol - synthesis, structure and formation of boronium salts

The 1,8-naphthalenediolate [1,8-O2C10H8] supported boronic and boric acid esters of general formula X-B(1,8-O2C10H8), where X = C6H5 (1a), C6F5 (2a), 3,4,5-F3-C6H2 (3a), 2,4,6-F3-C6H2 (4a), 2,6-F2-C6H3 (5a), 2,6-Cl2-C6H3 (6a), 2,4,6-Me3-C6H2 (7a), 2,6-(MeO)3-C6H3 (8a), Bun (9a), MeO (10a), OH (11a) and Cl (13a), were synthesized, NMR spectroscopically characterized, and the solid-state structures of 1a-5a, 8a and 10a determined by X-ray crystallography. The acceptor numbers of 1a-7a and 13a were determined and found to be similar to their catecholate analogues, R-Bcat, indicating similar Lewis acidities of these two classes of boronic acid esters. The reaction of B2(NMe2)4 with 1,8-naphthalenediol, followed by addition of HCl furnished the diboronic acid ester B2(1,8-O2C10H8)4 (16a) in ca. 70% yield. Cl-B(1,8-O2C10H8) (13a) was shown to react with O[double bond, length as m-dash]PEt3, DMAP, 1,10-phenanthroline and 2,2'-bipyridine, resp., to give the boronium salts [(Et3P[double bond, length as m-dash]O)2B(1,8-O2C10H8)]Cl (18a), [(DMAP)2B(1,8-O2C10H8)]Cl (22a), [(2,2'-bipyridine)B(1,8-O2C10H8)]Cl (23a) and [(1,10-phenanthroline)B(1,8-O2C10H8)]Cl (24a), which were characterized by NMR spectroscopy and X-ray crystallography.

meta-Selective C-H functionalisation of aryl boronic acids directed by a MIDA-derived boronate ester

N-Methyliminodiacetic acid (MIDA) boronates are boronic acid derivatives which are stable to reduction, oxidation and transmetalation. This has led to their widespread use as boronic acid protecting groups (PGs) and in iterative cross-couplings. We describe herein the development of a novel MIDA derivative that acts in a dual manner, as a protecting group and a directing group (DG) for meta C(sp²)–H functionalisation of arylboronic acids. Palladium catalysed C–H alkenylations, acetoxylations and arylations are possible, at room temperature and under aerobic conditions. Deprotection to reveal the functionalised boronic acids is rapid and allows for full recovery of the DG. The technique allows the facile diversification of aryl boronic acids and their subsequent use in a range of reactions or in iterative processes.

An N-methyliminodiacetic acid derivative allows the meta-C–H functionalisation of boronic acids, acting simultaneously as a directing and protecting group.

Suzuki–Miyaura coupling revisited: an integrated computational study

Computation is used to revisit the mechanism of the Suzuki–Miyaura coupling mechanism.

Reductive α-borylation of α,β-unsaturated esters using NHC-BH3 activated by I2 as a metal-free route to α-boryl esters

Useful α-boryl esters can be synthesized in one step from α,β-unsaturated esters using just a simple to access NHC-BH₃ (NHC = N-heterocyclic carbene) and catalytic I₂. The scope of this reductive α-borylation methodology is excellent and includes a range of alkyl, aryl substituted and cyclic and acyclic α,β-unsaturated esters. Mechanistic studies involving reductive borylation of a cyclic α,β-unsaturated ester with NHC-BD₃/I₂ indicated that concerted hydroboration of the alkene moiety in the α,β-unsaturated ester proceeds instead of a stepwise process involving initial 1,4-hydroboration; this is in contrast to the recently reported reductive α-silylation. The BH₂(NHC) unit can be transformed into electrophilic BX₂(NHC) moieties (X = halide) and the ester moiety can be reduced to the alcohol with the borane unit remaining intact to form β-boryl alcohols. The use of a chiral auxiliary, 8-phenylmenthyl ester, also enables effective stereo-control of the newly formed C-B bond. Combined two step ester reduction/borane oxidation forms diols, including excellent e.e. (97%) for the formation of S-3-phenylpropane-1,2-diol. This work represents a simple transition metal free route to form bench stable α-boryl esters from inexpensive starting materials.