The structure and binding mode of citrate in the stabilization of gold nanoparticles

Role of Transition Metal Dichalcogenides as a Catalyst Support for Decorating Gold Nanoparticles for Enhanced Hydrogen Evolution Reaction

The two-dimensional (2D) transition metal dichalcogenides (TMDs) have been widely used in various electrochemical applications, such as electrocatalysts, sensors, and energy storage. They have been potentially demonstrated not only as catalysts but also as supporting materials for boosting catalytic performance and durability. However, the different types of TMD nanosheets (transition metals and chalcogenide atoms) for supporting nanoparticles have not yet been investigated for electrocatalytic performance. Herein, we provide mechanistic insights into the hydrogen evolution reaction (HER) of various TMDs (i.e., MoS2, MoSe2, and WSe2) as catalyst supports for the decoration of gold nanoparticles (AuNPs), which represent an active catalyst. Among various TMD supports, it was found that the MoS2 supports with an optimal amount of AuNPs loading (MoS2/AuNPs) exhibited excellent catalytic activity (low overpotential and Tafel slope), which is better than that of other TMD supports and the previously reported TMD-based support. This is due to well-dispersed AuNPs with the charge transfer of Au-MoS2 interaction (increasing n-type), leading to highly active sites for HER performance. Moreover, the perfect laminar stacking of the MoS2/AuNPs electrode, providing high porosity and good wettability, plays an important role in enhancing the ability of ionic electrolytes to infiltrate through the electrode area (up to ∼50 F g-1). The MoS2/AuNPs exhibit long-term stability with no disintegration of the electrode when performing the HER at ultrahigh current density (>200 mA cm-2) for over 24 h. This work aims to deepen the understanding of TMD materials as catalyst supports, and is advantageous for the development of catalyst-based applications.

Luminescence "Turn-On" Sensing of Brain Natriuretic Peptide (BNP) - Dilated Cardiomyopathy Biomarker Based on the MoS2 Nanosheet Quenched Terbium Citrate Complex

Dilated cardiomyopathy (DCM), known as myocardial metabolic dysfunction, is recognized as a clinical condition characterized by left ventricular dilation or improper contraction of cardiac muscles in the absence of coronary atherosclerosis and hypertension. It is an independent risk factor for cardiac function caused by a hyperglycemic condition in diabetic patients leading to heart failure (HF), which renders the early diagnosis of DCM highly challenging. Hence, detection of early diagnostic biomarkers in blood serum to identify DCM conditions is quite requisite. Brain natriuretic peptide (BNP) is a well-recognized biomarker for heart failure and reported as an early diagnostic biomarker for DCM. In this work, we developed a terbium citrate based MoS2 nanosheet (NS) coupled immunoprobe for the sensitive detection of BNP. The antibody conjugated Tb-citrate complex exhibits green fluorescence, which is quenched by the introduction of MoS2 NS. On subsequent addition of antigen BNP, the fluorescence is enhanced because of specific antigen-antibody interaction. The probe is selective and sensitive toward BNP in a linear range from 30.76 to 849.85 pg/mL with a low LOD of 3.87 pg/mL. The probe is validated in spiked human serum samples with good recovery percentage.

Surface-enhanced Raman scattering enhancement using a hybrid gold nanoparticles@carbon nanodot substrate for herbicide detection

The widespread distribution of herbicides in the environment poses a significant risk to human health and wildlife. Surface-enhanced Raman scattering (SERS) has emerged as a powerful technique for detecting and analyzing herbicides. However, developing a low-cost, highly sensitive, reproducible, stable, and Raman-active nanostructured substrate for herbicide detection remains a particular challenge. In this research, a nanohybrid substrate consisting of gold nanoparticles@carbon nanodots (AuNPs@CNDs) was synthesized by reducing HAuCl4 in the presence of CNDs at 100 °C. The optical, chemical, and physical properties of CNDs, AuNPs, and the hybrid AuNPs@CND substrates were thoroughly investigated using various techniques including UV-vis spectrometry, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and CytoViva darkfield and hyperspectral imaging. The SERS effect of the substrates was evaluated using rhodamine 6G (Rh6G), a Raman-active probe, and two groups of herbicides containing mesotrione or S-metolachlor. The results demonstrated a significant signal amplification in the SERS spectra of Rh6G and herbicide molecule detection using the AuNPs@CND substrate compared to bare CNDs and AuNPs alone. This suggests that the nanohybrid AuNPs@CND SERS substrate holds promise for the detection of herbicides and other organic compounds in environmental applications.

Facile Synthesis and Characterization of Uniform Au Nanospheres Capped by Citrate for Biomedical Applications

We report a simple and versatile method for effectively replacing the toxic ligands, such as cetyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium chloride (CTAC), on the surface of Au nanospheres with different sizes by citrate. The method involves the deposition of an ultrathin shell of fresh Au in the presence of sodium citrate at an adequate concentration. After the ligand exchange process, multiple techniques are used to confirm that the surface of the resultant Au nanospheres is covered by citrate while there is no sign of aggregation. We also demonstrate the mitigation of cell toxicity after exchanging the surface-bound CTAB/CTAC with citrate, opening the door to a range of biomedical applications.

Polarized and Evanescent Guided Wave Surface-Enhanced Raman Spectroscopy of Ligand Interactions on a Plasmonic Nanoparticle Optical Chemical Bench

This study examined applications of polarized evanescent guided wave surface-enhanced Raman spectroscopy to determine the binding and orientation of small molecules and ligand-modified nanoparticles, and the relevance of this technique to lab-on-a-chip, surface plasmon polariton and other types of field enhancement techniques relevant to Raman biosensing. A simplified tutorial on guided-wave Raman spectroscopy is provided that introduces the notion of plasmonic nanoparticle field enhancements to magnify the otherwise weak TE- and TM-polarized evanescent fields for Raman scattering on a simple plasmonic nanoparticle slab waveguide substrate. The waveguide construct is called an optical chemical bench (OCB) to emphasize its adaptability to different kinds of surface chemistries that can be envisaged to prepare optical biosensors. The OCB forms a complete spectroscopy platform when integrated into a custom-built Raman spectrograph. Plasmonic enhancement of the evanescent field is achieved by attaching porous carpets of Au@Ag core shell nanoparticles to the surface of a multi-mode glass waveguide substrate. We calibrated the OCB by establishing the dependence of SER spectra of adsorbed 4-mercaptopyridine and 4-aminobenzoic acid on the TE/TM polarization state of the evanescent field. We contrasted the OCB construct with more elaborate photonic chip devices that also benefit from enhanced evanescent fields, but without the use of plasmonics. We assemble hierarchies of matter to show that the OCB can resolve the binding of Fe2+ ions from water at the nanoscale interface of the OCB by following the changes in the SER spectra of 4MPy as it coordinates the cation. A brief introduction to magnetoplasmonics sets the stage for a study that resolves the 4ABA ligand interface between guest magnetite nanoparticles adsorbed onto host plasmonic Au@Ag nanoparticles bound to the OCB. In some cases, the evanescent wave TM polarization was strongly attenuated, most likely due to damping by inertial charge carriers that favor optical loss for this polarization state in the presence of dense assemblies of plasmonic nanoparticles. The OCB offers an approach that provides vibrational and orientational information for (bio)sensing at interfaces that may supplement the information content of evanescent wave methods that rely on perturbations in the refractive index in the region of the evanescent wave.

Self-Regulated Assembly and Disassembly of Gold Nanoparticles for Low-Temperature Time Indication

The color-changing self-assembly and autonomous disassembly of colloidal gold nanoparticles (AuNPs) is reported by simply mixing negatively charged phosphine ligand-capped AuNPs with partially oxidized polyethylene glycol (PEG). The assembly of AuNPs is initiated by PEG adsorption, which disrupts the hydration layer of AuNPs, leading to depletion attraction and reduction of hydration repulsion among the AuNPs. The oxidative species in PEG subsequently oxidize and remove the charged ligands from the AuNP surface, resulting in a decrease and reversal of the negative surface charge. This causes the PEG to adsorb on AuNPs in a tighter and more direct manner, providing strong steric shielding to the AuNPs, thereby triggering the disassembly of the AuNP assemblies. The self-regulated assembly-disassembly process can be tuned widely by controlling chemical conditions of PEG, nanoparticle concentration, and the environmental conditions, suggesting potential applications as colorimetric time-temperature indicators for food and medicine storage conditions. As a proof of concept, it is demonstrated that the lifetime of the color-changing assembly-disassembly process can be extended from tens of minutes to weeks when subjected to a refrigerated environment, with tunability achievable through varying polymer conditions and storage atmospheres.

Metal-ligand bond in group-11 complexes and nanoclusters

Density functional theory is used to study geometric, energetic, and electronic properties of metal-ligand bonds in a series of group-11 metal complexes and ligand-protected metal clusters. We study complexes as the forms of M-L (L = SCH3, SC8H9, PPh3, NHCMe, NHCEt, NHCiPr, NHCBn, CCMe, CCPh) and L1-M-L2 (L1 = NHCBn, PPh3, and L2 = CCPh). Furthermore, we study clusters denoted as [M13L6Br6]- (L = PPh3, NHCMe, NHCEt, NHCiPr, NHCBn). The systems were studied at the standard GGA level using the PBE functional and including vdW corrections via BEEF-vdW. Generally, Au has the highest binding energies, followed by Cu and Ag. PBE and BEEF-vdW functionals show the order Ag-L > Au-L > Cu-L for bond lengths in both M-L complexes and metal clusters. In clusters, the smallest side group (CH3) in NHCs leads to the largest binding energy whereas no significant variations are seen concerning different side groups of NHC in M-L complexes. By analyzing the projected density of states and molecular orbitals in complexes and clusters, the M-thiolate bonds were shown to have σ and π bond characteristics whereas phosphines and carbenes were creating σ bonds to the transition metals. Interestingly, this analysis revealed divergent behavior for M-alkynyl complexes: while the CCMe group displayed both σ and π bonding features, the CCPh ligand was found to possess only σ bond properties in direct head-to-head binding configuration. Moreover, synergetic effects increase the average binding strength to the metal atom significantly in complexes of two different ligands and underline the potential of adding Cu to synthesize structurally richer cluster systems. This study helps in understanding the effects of different ligands on the stability of M-L complexes and clusters and suggests that PPh3 and NHCs-protected Cu clusters are most stable after Au clusters.

Controlling nanoparticle placement in Au/TiO2 inverse opal photocatalysts

Gold nanoparticle-loaded titania (Au/TiO2) inverse opals are highly ordered three-dimensional photonic structures with enhanced photocatalytic properties. However, fine control over the placement of the Au nanoparticles in the inverse opal structures remains challenging with traditional preparative methods. Here, we present a multi-component co-assembly strategy to prepare high-quality Au/TiO2 inverse opal films in which Au nanoparticles are either located on, or inside the TiO2 matrix, as verified using electron tomography. We report that Au nanoparticles embedded in the TiO2 support exhibit enhanced thermal and mechanical stability compared to non-embedded nanoparticles that are more prone to both leaching and sintering.

Dynamic Evolution and Reversibility of a Single Au25 Nanocluster for the Oxygen Reduction Reaction

Ultrasmall metallic nanoclusters (NCs) protected by surface ligands represent the most promising catalytic materials; yet understanding the structure and catalytic activity of these NCs remains a challenge due to dynamic evolution of their active sites under reaction conditions. Herein, we employed a single-nanoparticle collision electrochemistry method for real-time monitoring of the dynamic electrocatalytic activity of a single fully ligand-protected Au25(PPh3)10(SC2H4Ph)5Cl22+ nanocluster (Au252+ NC) at a cavity carbon nanoelectrode toward the oxygen reduction reaction (ORR). Our experimental results and computational simulations indicated that the reversible depassivation and passivation of ligands on the surface of the Au252+ NC, combined with the dynamic conformation evolution of the Au259+ core, led to a characteristic current signal that involves "ON-OFF" switches and "ON" fluctuations during the ORR process of a single Au252+ NC. Our findings reinvent the new perception and comprehension of the structure-activity correlation of NCs at the atomic level.

Medical Applications of Silver and Gold Nanoparticles and Core-Shell Nanostructures Based on Silver or Gold Core: Recent Progress and Innovations

Nanoparticles (NPs) of noble metals such as silver (Ag NPs) or gold (Au NPs) draw the attention of scientists looking for new compounds to use in medical applications. Scientists have used metal NPs because of their easy preparation, biocompatibility, ability to influence the shape and size or modification, and surface functionalization. However, to fully use their capabilities, both the benefits and their potential threats should be considered. One possibility to reduce the potential threat and thus prevent the extinction of their properties resulting from the agglomeration, they are covered with a neutral material, thus obtaining core-shell nanostructures that can be further modified and functionalized depending on the subsequent application. In this review, we focus on discussing the properties and applications of Ag NPs and Au NPs in the medical field such as the treatment of various diseases, drug carriers, diagnostics, and many others. In addition, the following review also discusses the use and potential applications of Ag@SiO2 and Au@SiO2 core-shell nanostructures, which can be used in cancer therapy and diagnosis, treatment of infections, or tissue engineering.

Surface-Enhanced Raman Spectroscopy: Current Understanding, Challenges, and Opportunities

While surface-enhanced Raman spectroscopy (SERS) has experienced substantial advancements since its discovery in the 1970s, it is an opportunity to celebrate achievements, consider ongoing endeavors, and anticipate the future trajectory of SERS. In this perspective, we encapsulate the latest breakthroughs in comprehending the electromagnetic enhancement mechanisms of SERS, and revisit CT mechanisms of semiconductors. We then summarize the strategies to improve sensitivity, selectivity, and reliability. After addressing experimental advancements, we comprehensively survey the progress on spectrum-structure correlation of SERS showcasing their important role in promoting SERS development. Finally, we anticipate forthcoming directions and opportunities, especially in deepening our insights into chemical or biological processes and establishing a clear spectrum-structure correlation.

Strong Interactions between Au Nanoparticles and BiVO4 Photoanode Boosts Hole Extraction for Photoelectrochemical Water Splitting

Strong metal-support interaction (SMSI) is widely proposed as a key factor in tuning catalytic performances. Herein, the classical SMSI between Au nanoparticles (NPs) and BiVO4 (BVO) supports (Au/BVO-SMSI) is discovered and used innovatively for photoelectrochemical (PEC) water splitting. Owing to the SMSI, the electrons transfer from V4+ to Au NPs, leading to the formation of electron-rich Au species (Auδ-) and strong electronic interaction (i.e., Auδ--Ov-V4+), which readily contributes to extract photogenerated holes and promote charge separation. Benefitted from the SMSI effect, the as-prepared Au/BVO-SMSI photoanode exhibits a superior photocurrent density of 6.25 mA cm-2 at 1.23 V versus the reversible hydrogen electrode after the deposition of FeOOH/NiOOH cocatalysts. This work provides a pioneering view for extending SMSI effect to bimetal oxide supports for PEC water splitting, and guides the interfacial electronic and geometric structure modulation of photoanodes consisting of metal NPs and reducible oxides for improved solar energy conversion efficiency.

Biomolecular Corona of Gold Nanoparticles: The Urgent Need for Strong Roots to Grow Strong Branches

Gold nanoparticles (GNPs) are largely employed in diagnostics/biosensors and are among the most investigated nanomaterials in biology/medicine. However, few GNP-based nanoformulations have received FDA approval to date, and promising in vitro studies have failed to translate to in vivo efficacy. One key factor is that biological fluids contain high concentrations of proteins, lipids, sugars, and metabolites, which can adsorb/interact with the GNP's surface, forming a layer called biomolecular corona (BMC). The BMC can mask prepared functionalities and target moieties, creating new surface chemistry and determining GNPs' biological fate. Here, the current knowledge is summarized on GNP-BMCs, analyzing the factors driving these interactions and the biological consequences. A partial fingerprint of GNP-BMC analyzing common patterns of composition in the literature is extrapolated. However, a red flag is also risen concerning the current lack of data availability and regulated form of knowledge on BMC. Nanomedicine is still in its infancy, and relying on recently developed analytical and informatic tools offers an unprecedented opportunity to make a leap forward. However, a restart through robust shared protocols and data sharing is necessary to obtain "stronger roots". This will create a path to exploiting BMC for human benefit, promoting the clinical translation of biomedical nanotools.

Conjugation to gold nanoparticles of methionine gamma-lyase, a cancer-starving enzyme. Physicochemical characterization of the nanocomplex for prospective nanomedicine applications

The pyridoxal 5'-dependent enzyme methionine γ-lyase (MGL) catalyzes the degradation of methionine. This activity has been profitable to develop an antitumor agent exploiting the strict dependence of most malignant cells on the availability of methionine. Indeed, methionine depletion blocks tumor proliferation and leads to an increased susceptibility to anticancer drugs. Here, we explore the conjugation of MGL to gold nanoparticles capped with citrate (AuNPs) as a novel strategy to deliver MGL to cancer cells. Measurements of Transmission Electron Microscopy, Dynamic Light Scattering, Asymmetrical Flow Field-Flow Fractionation, X-ray Photoelectron Spectroscopy, and Circular Dichroism allowed to achieve an extensive biophysical and biochemical characterization of the MGL-AuNP complex including particle size, size distribution, MGL loading yield, enzymatic activity, and impact of gold surface on protein structure. Noticeably, we found that activity retention was improved over time for the enzyme adsorbed to AuNPs with respect to the enzyme free in solution. The acquired body of knowledge on the nanocomplex properties and this encouraging stabilizing effect upon conjugation are the necessary basis for further studies aimed at the evaluation of the therapeutic potential of MGL-AuNP complex in a biological milieu.

The Interaction of Amines with Gold Nanoparticles

Understanding the interactions between amines and the surface of gold nanoparticles is important because of their role in the stabilization of the nanosystems, in the formation of the protein corona, and in the preparation of semisynthetic nanozymes. By using fluorescence spectroscopy, electrochemistry, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and molecular simulation, a detailed picture of these interactions is obtained. Herein, it is shown that amines interact with surface Au(0) atoms of the nanoparticles with their lone electron pair with a strength linearly correlating with their basicity corrected for steric hindrance. The kinetics of binding depends on the position of the gold atoms (flat surfaces or edges) while the mode of binding involves a single Au(0) with nitrogen sitting on top of it. A small fraction of surface Au(I) atoms, still present, is reduced by the amines yielding a much stronger Au(0)-RN.+ (RN. , after the loss of a proton) interaction. In this case, the mode of binding involves two Au(0) atoms with a bridging nitrogen placed between them. Stable Au nanoparticles, as those required for robust semisynthetic nanozymes preparation, are better obtained when the protein is involved (at least in part) in the reduction of the gold ions.

Kinetic modelling of ultrasound-triggered chemotherapeutic drug release from the surface of gold nanoparticles

Therapeutic ultrasound can be used to trigger the on-demand release of chemotherapeutic drugs from gold nanoparticles (GNPs). In the previous work, our group achieved doxorubicin (DOX) release from the surface of GNPS under low-intensity pulsed ultrasound (LIPUS) exposure. However, the specific release kinetics of ultrasound-triggered DOX release from GNPs is not known. Here, we present a release kinetics study of DOX from GNPs under ultrasound exposure for the first time. A novel dialysis membrane setup was designed to quantify DOX release from LIPUS-activated GNPs at 37.0 °C and 43.4 °C (hyperthermia temperature range). Contributions of thermal and non-thermal mechanisms of LIPUS-triggered DOX release were also quantified. Non-thermal mechanisms accounted for 40 ± 7% and 34 ± 5% of DOX release for 37.0 °C and 43.4 °C trials, respectively. DOX release under LIPUS exposure was found to follow Korsmeyer-Peppas (K-P) kinetics, suggesting a shift from a Fickian (static) to a non-Fickian (dynamic) release profile with the addition of non-thermal interactions. DOX release was attributed to an anomalous diffusion release mechanism from the GNP surface. A finite element model was also developed to quantify the acoustic radiation force, believed to be the driving force of non-thermal DOX release inside the dialysis bag.

Electric Field-Driven Self-Assembly of Gold Nanoparticle Monolayers on Silicon Substrates

Nanoparticles (NPs) bridge the gap between bulk materials and their equivalent molecular/atomic counterparts. The physical, optical, and electronic properties of individual NPs alter with the changes in their surrounding environment at the nanoscale. Similarly, the characteristics of thin films of NPs depend on their lateral and volumetric densities. Thus, attaining single monolayers of these NPs would play a vital role in the improved characteristics of semiconductor devices such as nanosensors, field effect transistors, and energy harvesting devices. Developing nanosensors, for instance, requires precise methods to fabricate a monolayer of NPs on selected substrates for sensing and other applications. Herein, we developed a physical fabrication method to form a monolayer of NPs on a planar silicon surface by creating an electric field of intensity 5.71 × 104 V/m between parallel plates of a capacitor, by applying a DC voltage. The physics of monolayer formation caused by an externally applied electric field on the gold NPs (Au-NPs) of size 20 nm in diameter and possesses a zeta potential of -250 to -290 mV, is further analyzed with the help of the finite element simulation. The enhanced electric field, in the order of 108 V/m, around the Au-NPs indicates a high surface charge density on the NPs, which results in a high electric force per unit area that guides them to settle uniformly on the surface of the silicon substrate.

TMB+-mediated etching of urchin-like gold nanostructures for colorimetric sensing

The morphology-dependent localized surface plasmon resonance of gold nanostructures has been widely utilized for designing sensors. One method relies on the color change of gold nanoparticles upon etching. In previous work, TMB2+oxidized from 3,3',5,5'-tetramethylbenzidine (TMB) was found to etch gold nanorods (AuNRs), leading to a spectrum of different colors. However, the preparation of TMB2+needs the addition of a strong acid and other harsh conditions. Herein, a new colorimetric biosensing platform was developed using urchin-like gold nanoparticles (AuNUs). Compared with AuNRs, the etching of AuNUs can happen under mild conditions by TMB+at pH 6, protecting enzymes and proteins from denaturation. The role of CTAB surfactant was dissected, and its bromide ions were found to be involved in the etching process. Based on these observations, a one-step colorimetric detection of H2O2was realized by using horseradish peroxidase and H2O2to oxidize TMB. Within 30 min, this system achieved a detection limit of 80 nM H2O2. This work offered fundamental insights into the etching of anisotropic gold nanostructures and optimized the etching conditions. These advancements hold promise for broader applications in biosensing and analytical chemistry.

Computational Modeling of Gold Nanoparticle Interacting with Molecules of Pharmaceutical Interest in Water

We derived a theory of biomolecule binding to the surface of Aun clusters and of the Au plane based on the hard soft acid base (HSAB) principle and the free electron metallic surface model. With the use of quantum mechanical calculations, the chemical potential (μ) and the chemical hardness (η) of the biomolecules are estimated. The effect of the gold is introduced via the empirical value of the gold chemical potential (-5.77 eV) as well as by using the expression (modified here) for the chemical hardness (η). The effect of an aqueous environment is introduced by means of the ligand molecular geometry influenced by the PCM field. This theory allows for a fast and low-cost estimation of binding biomolecules to the AuNPs surface. The predicted binding of thiolated genistein and abiraterone to the gold surface is about 20 kcal/mol. The model of the exchange reaction between these biomolecules and citrates on the Au surface corresponds well with the experimental observations for thiolated abiraterone. Moreover, using a model of the place exchange of linear mercaptohydrocarbons on 12-mercaptododecane acid methyl ester bound to the Au surface, the present results reflect the known relation between exchange energy and the size of the reagents.

Spectroscopic analyses of particle and energy aggregations at the interface of silver nanoparticles and fluorescent carbon nanodots

We study the change in the surface electromagnetic field provided by photoexcited silver nanoparticles as the field is disturbed by fluorescent carbon nanodots. Fluorescent carbon nanodots with an appropriate quantity and quality of surface functional groups are used to mediate the aggregation of silver nanoparticles of matching size and shape to form available nano-size conical structures. Carbon nanodots in the composite absorb and transfer additional photoenergy to the silver surface, resulting in energy aggregation within the cone structure and enhancement of the electromagnetic field in proximity to the silver surface. This elevated energy state is manifested in the strengthening of the SERS signal of the analytical probe 4-aminophenyl disulfide and the mechanism involved is elucidated by additional molecular spectroscopy studies.

Multilayer Model of Gold Nanoparticles (AuNPs) and Its Application in the Classical Molecular Dynamics Simulation of Citrate-Capped AuNPs

Studies on the interaction between gold nanoparticles (AuNPs) and functional proteins have been useful in developing diagnostic and therapeutic agents. Such studies require a realistic computational model of AuNPs for successful molecular design works. This study offers a new multilayer model of AuNPs to address the inconsistency between its molecular mechanics' interpretation and AuNP's plasmonic nature. We performed partial charge quantum calculation of AuNPs using Au13 and Au55 models. The result showed that it has partial negative charges on the surface and partial positive charges on the inner part, indicating that the AuNP model should be composed of multiatom types. We tested the partial charge parameters of these gold (Au) atoms in classical molecular dynamics simulation (CMD) of AuNPs. The result showed that our parameters performed better in simulating the adsorption of Na+ and dicarboxy acetone in terms of consistency with surface charge density than the zero charges Au in the interface force field (IFF). We proposed that the multiple-charged AuNP model can be developed further into a simpler four-atom type of Au in a larger AuNP size.

Controlled synthesis and computational analysis of gold nanostars for the treatment of Fusarium oxysporum

Fusarium oxysporum (F. oxysporum) is linked to the widespread fusarium wilt in plants affecting the quality and yield of food crops. Management of fusarium wilt by synthetic fertilizers poses safety concerns. Safer-by-design nanomaterials synthesized with a greener approach can meet the needs of commercial antifungal drug resistance. Herein, a simple aqueous reduction method has been adopted for the synthesis of anisotropic gold nanostars (AuNSs) using quercetin-para aminobenzoic acid (QPABA) as both a reducing and stabilizing agent at room temperature for the treatment of F. oxysporum. QPABA was used to control the growth of Au³⁺ star-shaped nanoparticles at increasing concentrations in the ratio of 2 : 1 (QPABA : Au³⁺ ions) respectively. Transmission electron microscopy (TEM) analysis of the as-prepared gold nanoparticles confirmed the formation of nanostars with sizes of 40 ± 2 nm. The formation of anisotropic gold nanoparticles was evaluated by UV-vis characterizations which showed longitudinal surface plasmon modes at 540 and 800 nm. The gold nanoparticles exhibit excellent antifungal activity against F. oxysporum with the minimum inhibitory concentration (MIC) of 100 μg mL^-1 using an agar well-diffusion assay. AuNSs proved to be efficacious in controlling F. oxysporum, as shown in the SEM analysis with a disintegrated cell membrane upon treatment. Computational analysis was performed to determine the specific binding sites on the QPABA ligand for gold ion interactions using the DFT B3LYP method, with a 6-31+G(d) basis set. Results showed that the interaction between Au³⁺ and QPABA at the 4 and 3 positions yielded the highest stability and formation of gold nanostars. The results suggest that the synthesized AuNSs act as a promising antifungal agent with great potential in treating frequent fungal infections that affect agricultural production.

Effect of plasmonic excitation on mature insulin amyloid fibrils

Interactions between amyloid protein structures and nanomaterials have been extensively studied to develop effective inhibitors of amyloid aggregation. Limited investigations are reported on the impact of nanoparticles on mature fibrils. In this work, gold nanoparticles are used as photothermal agents to alter insulin fibrils. To this end, gold colloids bearing a negatively charged capping shell, with an average diameter of 14 nm and a plasmon resonance maximum at 520 nm are synthesized. The effects on mature insulin fibril morphology and structure upon plasmonic excitation of the nanoparticles-fibril samples have been monitored by spectroscopic and microscopic methods. The obtained data indicate that an effective destruction of the amyloid aggregates occur upon irradiation of the plasmonic nanoparticles, allowing the development of emerging strategies to alter the structure of amyloid fibrils.

Engineering Nano-Au-Based Sensor Arrays for Identification of Multiple Ni(II) Complexes in Water Samples

Advanced techniques for nickel (Ni(II)) removal from polluted waters have long been desired but challenged by the diversity of Ni(II) species (most in the form of complexes) which could not be readily discriminated by the traditional analytical protocols. Herein, a colorimetric sensor array is developed to address the above issue based on the shift of the UV-vis spectra of gold nanoparticles (Au NPs) after interaction with Ni(II) species. The sensor array is composed of three Au NP receptors modified by N-acetyl-l-cysteine (NAC), tributylhexadecylphosphonium bromide (THPB), and the mixture of 3-mercapto-1-propanesulfonic acid and adenosine monophosphate (MPS/AMP), to exhibit possible coordination, electrostatic attraction, and hydrophobic interaction toward different Ni(II) species. Twelve classical Ni(II) species were selected as targets to systematically demonstrate the applicability of the sensor array under various conditions. Multiple interactions with Ni(II) species were evidenced to trigger the diverse Au NP aggregation behaviors and subsequently produce a distinct colorimetric response toward each Ni(II) species. With the assistance of multivariate analysis, the Ni(II) species, either as the sole compound or as mixtures, can be unambiguously discriminated with high selectivity in simulated and real water samples. Moreover, the sensor array is very sensitive with the detection limit in the range of 4.2 to 10.5 μM for the target Ni(II) species. Principal component analysis signifies that coordination dominates the response of the sensor array toward different Ni(II) species. The accurate Ni(II) speciation provided by the sensor array is believed to assist the rational design of specific protocols for water decontamination and to shed new light on the development of convenient discrimination methods for other toxic metals of concern.

Local cation-tuned reversible single-molecule switch in electric double layer

The nature of molecule-electrode interface is critical for the integration of atomically precise molecules as functional components into circuits. Herein, we demonstrate that the electric field localized metal cations in outer Helmholtz plane can modulate interfacial Au-carboxyl contacts, realizing a reversible single-molecule switch. STM break junction and I-V measurements show the electrochemical gating of aliphatic and aromatic carboxylic acids have a conductance ON/OFF behavior in electrolyte solution containing metal cations (i.e., Na⁺, K⁺, Mg²⁺ and Ca²⁺), compared to almost no change in conductance without metal cations. In situ Raman spectra reveal strong molecular carboxyl-metal cation coordination at the negatively charged electrode surface, hindering the formation of molecular junctions for electron tunnelling. This work validates the critical role of localized cations in the electric double layer to regulate electron transport at the single-molecule level.

Semi-wrapped gold nanoparticles for surface-enhanced Raman scattering detection

Researchers have struggled to develop highly reliable and sensitive surface-enhanced Raman scattering (SERS) substrates for detecting compounds in complicated systems. In this work, a strategy by constructing Au cores with incompletely wrapped Prussian blue (PB) for highly reliable and sensitive SERS substrate is proposed. The wrapped PB layers can provide the internal standard (IS) to calibrate the SERS signal floatation, whereas the exposed surface of Au cores offers the enhancement effect. The balance between the signal self-calibration and enhancement (hence the trade-off between SERS reliability and sensitivity) is obtained by the approximate semi-wrapping configuration of PB layers on Au cores (i.e., SW-Au@PB). The proposed SW-Au@PB nanoparticles (NPs) exhibit the similar enhancement factor as the pristine Au NPs and contribute to the ultralow RSD (8.55%) of calibrated SERS signals using R6G as probe molecules. The simultaneously realized reliability and sensitivity of SW-Au@PB NPs also enables the detection of hazardous pesticide residues such as paraquat and thiram in herbal plants, with the average detection accuracy up to 92%. Overall, this work mainly provides a controllable synthetic strategy for incompletely wrapped NPs, and most importantly, explores the potential with a proof-of-concept practical application in accurate and sensitive Raman detection of hazardous substances with varying solubility.

Efficient capture of recombinant SARS-CoV-2 receptor-binding domain (RBD) with citrate-coated magnetic iron oxide nanoparticles

Several vaccines against COVID-19 use a recombinant SARS-CoV-2 receptor-binding domain (RBD) as antigen, making the purification of this protein a key step in their production. In this work, citrate-coated magnetic iron oxide nanoparticles were evaluated as nano adsorbents in the first step (capture) of the purification of recombinant RBD. The nanoparticles were isolated through coprecipitation and subsequently coated with sodium citrate. The citrate-coated nanoparticles exhibited a diameter of 10 ± 2 nm, a hydrodynamic diameter of 160 ± 3 nm, and contained 1.9 wt% of citrate. The presence of citrate on the nanoparticles' surface was confirmed through FT-IR spectra and thermogravimetric analysis. The crystallite size (10.1 nm) and the lattice parameter (8.3646 Å) were determined by X-ray diffraction. In parallel, RBD-containing supernatant extracted from cell culture was exchanged through ultrafiltration and diafiltration into the adsorption buffer. The magnetic capture was then optimized using different concentrations of nanoparticles in the purified supernatant, and we found 40 mg mL^-1 to be optimal. The ideal amount of nanoparticles was assessed by varying the RBD concentration in the supernatant (between 0.113 mg mL^-1 and 0.98 mg mL^-1), which resulted in good capture yields (between 83 ± 5% and 94 ± 4%). The improvement of RBD purity after desorption was demonstrated by SDS-PAGE and RP-HPLC. Furthermore, the magnetic capture was scaled up 100 times, and the desorption was subjected to chromatographic purifications. The obtained products recognized anti-RBD antibodies and bound the ACE2 receptor, proving their functionality after the developed procedure.

Gold nanoparticle shape dependence of colloidal stability domains

Controlling the spatial arrangement of plasmonic nanoparticles is of particular interest to utilize inter-particle plasmonic coupling, which allows changing their optical properties. For bottom-up approaches, colloidal nanoparticles are interesting building blocks to generate more complex structures via controlled self-assembly using the destabilization of colloidal particles. For plasmonic noble metal nanoparticles, cationic surfactants, such as CTAB, are widely used in synthesis, both as shaping and stabilizing agents. In such a context, understanding and predicting the colloidal stability of a system solely composed of AuNPs and CTAB is fundamentally crucial. Here, we tried to rationalize the particle behavior by reporting the stability diagrams of colloidal gold nanostructures taking into account parameters such as the size, shape, and CTAB/AuNP concentration. We found that the overall stability was dependent on the shape of the nanoparticles, with the presence of sharp tips being the source of instability. For all morphologies evaluated here, a metastable area was systematically observed, in which the system aggregated in a controlled way while maintaining the colloidal stability. Combining different strategies with the help of transmission electron microscopy, the behavior of the system in the different zones of the diagrams was addressed. Finally, by controlling the experimental conditions with the previously obtained diagrams, we were able to obtain linear structures with a rather good control over the number of particles participating in the assembly while maintaining good colloidal stability.

Surfactant-Free Colloidal Syntheses of Gold-Based Nanomaterials in Alkaline Water and Mono-alcohol Mixtures

Gold nanoparticles (Au NPs) and gold-based nanomaterials combine unique properties relevant for medicine, imaging, optics, sensing, catalysis, and energy conversion. While the Turkevich-Frens and Brust-Schiffrin methods remain the state-of-the-art colloidal syntheses of Au NPs, there is a need for more sustainable and tractable synthetic strategies leading to new model systems. In particular, stabilizers are almost systematically used in colloidal syntheses, but they can be detrimental for fundamental and applied studies. Here, a surfactant-free synthesis of size-controlled colloidal Au NPs stable for months is achieved by the simple reduction of HAuCl₄ at room temperature in alkaline solutions of low-viscosity mono-alcohols such as ethanol or methanol and water, without the need for any other additives. Palladium (Pd) and bimetallic Au _x Pd _y NPs, nanocomposites and multimetallic samples, are also obtained and are readily active (electro)catalysts. The multiple benefits over the state-of-the-art syntheses that this simple synthesis bears for fundamental and applied research are highlighted.

Gold Nanoparticles Synthesized Using Various Reducing Agents and the Effect of Aging for DNA Sensing

Gold nanoparticles (AuNPs) are one of the most commonly used reagents in colloidal science and biosensor technology. In this work, we first compared AuNPs prepared using four different reducing agents including citrate, glucose, ascorbate, and 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES). At the same absorbance at the surface plasmon peak of 520-530 nm, citrate-AuNPs and glucose-AuNPs adsorbed more DNA and achieved higher affinity to the adsorbed DNA. In addition, citrate-AuNPs had better sensitivity than glucose-AuNPs for label-free DNA detection. Then, using citrate-AuNPs, the effect of aging was studied by incubation of the AuNPs at 22 °C (room temperature) and at 4 °C for up to 6 months. During aging, the colloidal stability and DNA adsorption efficiency gradually decreased. In addition, the DNA sensing sensitivity using a label-free method also dropped around 4-fold after 6 months. Heating at boiling temperature of the aged citrate-AuNPs could not rejuvenate the sensing performance. This study shows that while citrate-AuNPs are initially better than the other three AuNPs in their colloid properties and sensing properties, this edge in performance might gradually decrease due to constantly changing surface properties caused from the aging effect.

Conjugation of gold nanoparticles with multidentate surfactants for enhanced stability and biological properties

This work originated from the need to functionalize surfactant-coated inorganic nanoparticles for biomedical applications, a process that is limited by excess unbound surfactant. These limitations are connected to the bioconjugation of targeting molecules that are often in equilibrium between the free aliquot in solution and that which binds the surface of the nanoparticles. The excess in solution can play a role in the biocompatability in vitro and in vivo of the final nanoparticles stock. For this purpose, we tested the ability of common surfactants - monothiolated polyethylene glycol and amphiphilic polymers - to colloidally stabilize nanoparticles as excess surfactant is removed and compared them to newly appearing multidentate surfactants endowed with high avidity for inorganic nanoparticles. Our results showed that monothiolated polyethylene glycol or amphiphilic polymers have an insufficient affinity to the nanoparticles and as the excess surfactant is removed the colloidal stability is lost, while multidentate high-avidity surfactants excel in the same regard, possibly allowing improvement in an array of nanoparticle applications, especially in those stated.

Universal linker-free assembly of core-satellite hetero-superstructures

Colloidal superstructures comprising hetero-building blocks often show unanticipated physical and chemical properties. Here, we present a universal assembly methodology to prepare hetero-superstructures. This straightforward methodology allows the assembly of building block materials varying from inorganic nanoparticles to living cells to form superstructures. No molecular linker is required to bind the building blocks together and thus the products do not contain any unwanted adscititious material. The Fourier transform infrared spectra, high resolution transmission electron microscopic images and nanoparticle adhesion force measurement results reveal that the key to self-organization is stripping surface ligands by adding non-polar solvents or neutralizing surface charge by adding salts, which allow us to tune the balance between van der Waals attraction and electrostatic repulsion in the colloid so as to trigger the assembling process. As a proof-of-concept, the superior photocatalytic activity and single-particle surface-enhanced Raman scattering of the corresponding superstructures are demonstrated. Our methodology greatly extends the scope of building blocks for superstructure assembly and enables scalable construction of colloidal multifunctional materials.

A Machine Learning Model of Chemical Shifts for Chemically and Structurally Diverse Molecular Solids

Nuclear magnetic resonance (NMR) chemical shifts are a direct probe of local atomic environments and can be used to determine the structure of solid materials. However, the substantial computational cost required to predict accurate chemical shifts is a key bottleneck for NMR crystallography. We recently introduced ShiftML, a machine-learning model of chemical shifts in molecular solids, trained on minimum-energy geometries of materials composed of C, H, N, O, and S that provides rapid chemical shift predictions with density functional theory (DFT) accuracy. Here, we extend the capabilities of ShiftML to predict chemical shifts for both finite temperature structures and more chemically diverse compounds, while retaining the same speed and accuracy. For a benchmark set of 13 molecular solids, we find a root-mean-squared error of 0.47 ppm with respect to experiment for ¹H shift predictions (compared to 0.35 ppm for explicit DFT calculations), while reducing the computational cost by over four orders of magnitude.

Direct and Water-Mediated Adsorption of Stabilizers on SERS-Active Colloidal Bimetallic Plasmonic Nanomaterials: Insight into Citrate-AuAg Interactions from DFT Calculations

In previous studies, AuAg colloidal nanostar formulations were developed with the two-fold aim of producing optimized surface-enhanced Raman spectroscopy (SERS) substrates and investigating the nature of the capping process itself. Findings demonstrated that the nanoparticle metals are alloyed and neutral, and capping by stabilizers occurs via chemisorption. This study utilizes citrate as the model stabilizer and investigates the mechanistic aspects of its interaction with mono- (Au₂₀) and bimetallic (Au₁₉Ag) surfaces by density functional theory (DFT) calculations. Citrate was modeled according to the colloid's pH and surrounded by a water and sodium first solvation shell. A population of stable cluster-citrate structures was obtained, and energies were refined at the uB3LYP//LANL2TZ(f)/cc-pVTZ level of theory. Solvation was accounted for both explicitly and implicitly by the application of the continuum model SMD. Results indicate that both direct binding and binding by water proxy through the charge-transfer complex formation are thermodynamically favorable. Water participation in citrate adsorption is supported by the adsorption behavior observed experimentally and the comparison between experimental and DFT-simulated IR spectra. Vibrational mode analysis suggests the possible presence of water within a crystal in dried nanostar residues. All ΔG_ads(aq) indicate a weak chemisorptive process, leading to the hypothesis that citrate could be displaced by analytes during SERS measurements.

Predicted Adsorption Affinity for Enteric Microbial Metabolites to Metal and Carbon Nanomaterials

Ingested nanomaterials are exposed to many metabolites that are produced, modified, or regulated by members of the enteric microbiota. The adsorption of these metabolites potentially affects the identity, fate, and biodistribution of nanomaterials passing the gastrointestinal tract. Here, we explore these interactions using in silico methods, focusing on a concise overview of 170 unique enteric microbial metabolites which we compiled from the literature. First, we construct quantitative structure–activity relationship (QSAR) models to predict their adsorption affinity to 13 metal nanomaterials, 5 carbon nanotubes, and 1 fullerene. The models could be applied to predict log k values for 60 metabolites and were particularly applicable to ‘phenolic, benzoyl and phenyl derivatives’, ‘tryptophan precursors and metabolites’, ‘short-chain fatty acids’, and ‘choline metabolites’. The correlations of these predictions to biological surface adsorption index descriptors indicated that hydrophobicity-driven interactions contribute most to the overall adsorption affinity, while hydrogen-bond interactions and polarity/polarizability-driven interactions differentiate the affinity to metal and carbon nanomaterials. Next, we use molecular dynamics (MD) simulations to obtain direct molecular information for a selection of vitamins that could not be assessed quantitatively using QSAR models. This showed how large and flexible metabolites can gain stability on the nanomaterial surface via conformational changes. Additionally, unconstrained MD simulations provided excellent support for the main interaction types identified by QSAR analysis. Combined, these results enable assessing the adsorption affinity for many enteric microbial metabolites quantitatively and support the qualitative assessment of an even larger set of complex and biologically relevant microbial metabolites to carbon and metal nanomaterials.

Plasmonic colloidal Au nanoparticles in DMSO: a facile synthesis and characterisation

We report a new pathway for the synthesis of plasmonic gold nanoparticles (Au NPs) in a bio-compatible medium. A modified room temperature approach based on the standard Turkevich synthesis, using sodium citrate as a reducing and stabilizing agent, results in a highly stable colloidal suspension of Au NPs in dimethyl sulfoxide (DMSO). The mean NP size of about 15 nm with a fairly low size distribution is revealed by scanning electron microscopy. The stability test through UV-vis absorption spectroscopy indicates no sign of aggregation for months. The Au NPs are also characterized by X-ray photoelectron, Raman scattering, and FTIR spectroscopies. The stabilisation mechanism of the Au NPs in DMSO is concluded to be similar to that of NPs synthesized in water. The Au NPs obtained in this work are applicable as SERS substrates, as proved by common analytes. In terms of bio-applications, they do not possess such side-effects as pronounced antibacterial activity, based on the tests performed on non-pathogenic Gram-positive or Gram-negative bacteria.

Ultrasmall-in-Nano: Why Size Matters

Gold nanoparticles (AuNPs) are continuing to gain popularity in the field of nanotechnology. New methods are continuously being developed to tune the particles' physicochemical properties, resulting in control over their biological fate and applicability to in vivo diagnostics and therapy. This review focuses on the effects of varying particle size on optical properties, opsonization, cellular internalization, renal clearance, biodistribution, tumor accumulation, and toxicity. We review the common methods of synthesizing ultrasmall AuNPs, as well as the emerging constructs termed ultrasmall-in-nano-an approach which promises to provide the desirable properties from both ends of the AuNP size range. We review the various applications and outcomes of ultrasmall-in-nano constructs in vitro and in vivo.

Synergy of Adsorption and Plasmonic Photocatalysis in the Au-CeO2 Nanosystem: Experimental Validation and Plasmonic Modeling

Adsorption-mediated water treatment leaves adsorbents as secondary pollutants in the environment. However, photocatalysis aids in decomposing the contaminant into its nontoxic forms. In this context, we demonstrate an adsorption-photocatalysis pairing in Au-CeO₂ nanocomposites for a total methylene blue (MB) removal from water. We synthesized Au-CeO₂ through the citrate (cit) reduction method at different Au loading and studied its adsorption capacity with kinetics and thermodynamic models. We observe that the high adsorption capacity of Au-CeO₂ is primarily because of the presence of Ce³⁺ states in CeO₂ and citrate ligands on Au NPs. The Ce³⁺ states interact and transfer their electrons to supported Au NPs, rendering a negative charge over Au. The negatively charged Au surface and the carboxyl (-COO^-) group of citrate ligands mediate an electrostatic interaction/adsorption of cationic MB. The total removal of MB is expedited under white light and lasers. A control experiment with Au NPs shows less adsorption-photocatalysis. The size of Au NPs and Au-CeO₂ interfacial interaction is responsible for the surface plasmon resonance spectral position at 550-600 nm. Linear sweep voltammetry (LSV) and plasmonic field simulation show surface plasmon-driven photocatalysis in Au-CeO₂. LSV shows a 3-fold higher photocurrent density in Au-CeO₂ than colloidal Au NPs under white light. The simulated electric field intensity in Au-CeO₂ is maximum at SPR excitation and the closest interfacial separation (d = 0 nm). The plasmon-driven photocatalysis in colloidal Au NPs is mainly due to the interaction of hot electrons with the adsorbed MB molecule. Notably, near-field light concentration, hot electrons, and interfacial charge separation are responsible for excellent MB removal in the Au-CeO₂ nanosystem. The total MB removal through adsorption-photocatalysis pairing is 99.3% (Au-CeO₂), 30.7% (Au NPs), and 13% (CeO₂).

Chromatographic framework for coffee ring effect-driven separation of small molecules in surface enhanced Raman spectroscopy analysis

The applications of coffee ring effect (CRE) in analytical chemistry have been increasingly expanded from particles and macromolecules to small molecules, in particular coupled to surface-enhanced Raman spectroscopy (SERS). Despite the theory behind the formation of CRE itself from a single drop evaporation onto the dry surface is well established, the theoretical aspects of CRE-driven separation, especially the analyte-surface interactions involving small molecules, have not been conceived. Herein, we have developed a theoretical framework to describe the CRE-driven separation process of small molecules, using SERS analysis of dimethylarsinic acid (DMA^V), dimethylmonothioarsinic acid (DMMTA^V), and dimethyldithioarsinic acid (DMDTA^V) on gold nanofilm (AuNF) as an example. By combining the CRE theory for the radial flow and the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory for mass transfer between solution and AuNF surface, we adapted the conventional chromatographic theory to derive a modified van Deemter equation for the CRE-driven separation. By using this model, we predicted the travel distances of arsenicals based on the different affinity of analytes to the AuNF and evaluated the possibility of separation of unknown analytes by CRE-based SERS, demonstrating the successful adaptation of classic chromatographic theory to CRE-driven nanochromatography.

Controlled-Release Nanosystems with a Dual Function of Targeted Therapy and Radiotherapy in Colorectal Cancer

Nanoparticles are excellent platforms for several biomedical applications, including cancer treatment. They can incorporate different molecules to produce combinations of chemotherapeutic agents, radionuclides, and targeting molecules to improve the therapeutic strategies against cancer. These specific nanosystems are designed to have minimal side effects on healthy cells and better treatment efficacy against cancer cells when compared to chemotherapeutics, external irradiation, or targeted radiotherapy alone. In colorectal cancer, some metal and polymeric nanoparticle platforms have been used to potentialize external radiation therapy and targeted drug delivery. Polymeric nanoparticles, liposomes, albumin-based nanoparticles, etc., conjugated with PEG and/or HLA, can be excellent platforms to increase blood circulation time and decrease side effects, in addition to the combination of chemo/radiotherapy, which increases therapeutic efficacy. Additionally, radiolabeled nanoparticles have been conjugated to target specific tissues and are mainly used as agents for diagnosis, drug/gene delivery systems, or plasmonic photothermal therapy enhancers. This review aims to analyze how nanosystems are shaping combinatorial therapy and evaluate their status in the treatment of colorectal cancer.

Surfactant stabilized gold nanomaterials for environmental sensing applications - A review

Surfactant stabilized Gold (Au) nanomaterials (NMs) have been documented extensively in recent years for numerous sensing applications in the academic literature. Despite the crucial role these surfactants play in the sensing applications, the comprehensive reviews that highlights the fundamentals associated with these assemblies and impact of these surfactants on the properties and sensing mechanisms are still quite scare. This review is an attempt in organizing the vast literature associated with this domain by providing critical insights into the fundamentals, preparation methodologies and sensing mechanisms of these surfactant stabilized Au NMs. For the simplification, the surfactants are divided into the typical and advanced surfactants and the Au NMs are classified into Au nanoparticles (NPs) and Au nanoclusters (NCs) depending upon the complexity in structure and size of the NMs respectively. The preparative methodologies are also elaborated for enhancing the understanding of the readers regarding such assemblies. The case studies regarding surfactant stabilized Au NMs were further divided into colorimetric sensors, surface plasmonic resonance (SPR) based sensors, luminescence-based sensors, and electrochemical/electrical sensors depending upon the property utilized by the sensor for the sensing of an analyte. Future perspectives are also discussed in detail for the researchers looking for further progress in that particular research domain.

LptD-antigen system on gold nanoparticles: an innovative strategy in the nanovaccine development

Nanovaccine development is a growing research field in which the development of new carriers and bioconjugation approaches is a priority. In this sense, this report describes for the first time, the development of a novel conjugate that consists of gold nanoparticles (AuNPs) obtained by a one-step synthesis using an immunogenic peptide of the Lipopolysaccharide-assembly protein LptD fromVibrio parahaemolyticusbacteria as a reducing and capping agent. The resultingLptD@AuNPscompounds were fully characterized and the results showed the high capacity of the peptide to form complexes and reduce gold ions. The reaction yield estimated was higher than 83% and the chemical integrity of the peptide on the NP surface revealed a tyrosine amino acid bonding on the AuNP surface. Furthermore, theLptD@AuNPsystem showed high colloidal stability in a wide pH range (3-11 pH values), where the hydrodynamic diameter and Zeta potential behavior were strongly influenced by the functional groups of the antigenic peptide. The cytotoxicity assays showed that the obtained system is safe for mouse leukocytes, while immunized mice withLptD@AuNPsproduced specific IgG antibodies. These encouraging results revealed the efficacy of some antigenic peptides as reducers and capping agents, in addition, opening the path to determine immunogenicity and immunoprotective efficacy of theLptD@AuNPsystem against the disease induced byVibrio parahaemolyticus.

A Vehicle-Free Antimicrobial Polymer Hybrid Gold Nanoparticle as Synergistically Therapeutic Platforms for Staphylococcus aureus Infected Wound Healing

Pathogenic bacteria infection is a serious threat to human public health due to the high morbidity and mortality rates. Nano delivery system for delivering antibiotics provides an alternative option to improve the efficiency compared to conventional therapeutic agents. In addition to the drug loading capacity of nanocarriers, which is typically around 10%, further lowers the drug dose that pathological bacteria are exposed to. Moreover, nanocarriers that are not eliminated from the body may cause side effects. These limitations have motivated the development of self-delivery systems that are formed by the self-assembly of different therapeutic agents. In this study, a vehicle-free antimicrobial polymer polyhexamethylene biguanide (PHMB, with bactericidal and anti-biofilm functions) hybrid gold nanoparticle (Au NPs, with photothermal therapy (PTT)) platform (PHMB@Au NPs) is developed. This platform exhibits an excellent synergistic effect to enhance the photothermal bactericidal effect for Staphylococcus aureus under near-infrared irradiation. Furthermore, the results showed that PHMB@Au NPs inhibit the formation of biofilms, quickly remove bacteria to promote wound healing through PTT in infection model in vivo, and even mediate the transition of macrophages from M1 to M2 type, and accelerate tissue angiogenesis. PHMB@Au NPs will have promising value as highly effective antimicrobial agents for patient management.

Controlled Citrate Oxidation on Gold Nanoparticle Surfaces for Improved Surface-Enhanced Raman Spectroscopic Analysis of Low-Affinity Organic Micropollutants

Surface-enhanced Raman spectroscopy (SERS) provides an ultrasensitive, fast, and inexpensive method for organic micropollutant analysis, but its applications are limited by the low affinity of most organic micropollutants toward plasmonic nanoparticle surfaces. Particularly, the citrate layer on gold nanoparticle (AuNP) surfaces exerts strong resistance to ligand exchange and prevents carboxylic and phenolic pollutants from entering SERS "hot spots". In this study, we aim to extend the application of SERS to low-affinity organic micropollutants by oxidative decomposition of the citrate layer on AuNP surfaces. The kinetics of citrate oxidation were carefully controlled using sulfate radicals that were slowly released from peroxydisulfate photolysis, which guarantees both the stability of AuNP colloid and generation of a high density of SERS hot spots for pollutant analysis. In situ Raman spectroscopic monitoring demonstrates that citrate is first oxidized to di- and monocarboxylate acids and subsequently displaced by guest ligands. This oxidation-induced ligand exchange has been applied for SERS analysis of various low-affinity organic micropollutants, including monochloro-substituted carboxylates and phenols, as well as a widely used herbicide 2.4-dichlorophenoxyacetic acid. This study substantially broadens the library of organic micropollutants for label-free SERS analysis and advances SERS toward a holistic analytical tool for water quality monitoring.